Merge remote-tracking branch 'origin/development' into mueller/fsfw-default-value-pus-c-cfg
This commit is contained in:
commit
65f4433fad
@ -26,7 +26,8 @@ enum GpioOperation {
|
||||
|
||||
enum GpioTypes {
|
||||
NONE,
|
||||
GPIO_REGULAR,
|
||||
GPIO_REGULAR_BY_CHIP,
|
||||
GPIO_REGULAR_BY_LABEL,
|
||||
CALLBACK
|
||||
};
|
||||
|
||||
@ -68,28 +69,57 @@ public:
|
||||
int initValue = 0;
|
||||
};
|
||||
|
||||
class GpiodRegular: public GpioBase {
|
||||
class GpiodRegularBase: public GpioBase {
|
||||
public:
|
||||
GpiodRegular() :
|
||||
GpioBase(gpio::GpioTypes::GPIO_REGULAR, std::string(), gpio::Direction::IN, 0) {
|
||||
GpiodRegularBase(gpio::GpioTypes gpioType, std::string consumer, gpio::Direction direction,
|
||||
int initValue, int lineNum): GpioBase(gpioType, consumer, direction, initValue),
|
||||
lineNum(lineNum) {
|
||||
}
|
||||
;
|
||||
|
||||
GpiodRegular(std::string chipname_, int lineNum_, std::string consumer_,
|
||||
gpio::Direction direction_, int initValue_) :
|
||||
GpioBase(gpio::GpioTypes::GPIO_REGULAR, consumer_, direction_, initValue_),
|
||||
chipname(chipname_), lineNum(lineNum_) {
|
||||
}
|
||||
|
||||
GpiodRegular(std::string chipname_, int lineNum_, std::string consumer_) :
|
||||
GpioBase(gpio::GpioTypes::GPIO_REGULAR, consumer_, gpio::Direction::IN, 0),
|
||||
chipname(chipname_), lineNum(lineNum_) {
|
||||
}
|
||||
std::string chipname;
|
||||
int lineNum = 0;
|
||||
struct gpiod_line* lineHandle = nullptr;
|
||||
};
|
||||
|
||||
class GpiodRegularByChip: public GpiodRegularBase {
|
||||
public:
|
||||
GpiodRegularByChip() :
|
||||
GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP,
|
||||
std::string(), gpio::Direction::IN, gpio::LOW, 0) {
|
||||
}
|
||||
|
||||
GpiodRegularByChip(std::string chipname_, int lineNum_, std::string consumer_,
|
||||
gpio::Direction direction_, int initValue_) :
|
||||
GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP,
|
||||
consumer_, direction_, initValue_, lineNum_),
|
||||
chipname(chipname_){
|
||||
}
|
||||
|
||||
GpiodRegularByChip(std::string chipname_, int lineNum_, std::string consumer_) :
|
||||
GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, consumer_,
|
||||
gpio::Direction::IN, gpio::LOW, lineNum_),
|
||||
chipname(chipname_) {
|
||||
}
|
||||
|
||||
std::string chipname;
|
||||
};
|
||||
|
||||
class GpiodRegularByLabel: public GpiodRegularBase {
|
||||
public:
|
||||
GpiodRegularByLabel(std::string label_, int lineNum_, std::string consumer_,
|
||||
gpio::Direction direction_, int initValue_) :
|
||||
GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL, consumer_,
|
||||
direction_, initValue_, lineNum_),
|
||||
label(label_) {
|
||||
}
|
||||
|
||||
GpiodRegularByLabel(std::string label_, int lineNum_, std::string consumer_) :
|
||||
GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL, consumer_,
|
||||
gpio::Direction::IN, gpio::LOW, lineNum_),
|
||||
label(label_) {
|
||||
}
|
||||
|
||||
std::string label;
|
||||
};
|
||||
|
||||
class GpioCallback: public GpioBase {
|
||||
public:
|
||||
GpioCallback(std::string consumer, gpio::Direction direction_, int initValue_,
|
||||
|
||||
@ -1,3 +1,5 @@
|
||||
target_sources(${LIB_FSFW_NAME} PRIVATE
|
||||
GyroL3GD20Handler.cpp
|
||||
MgmRM3100Handler.cpp
|
||||
MgmLIS3MDLHandler.cpp
|
||||
)
|
||||
|
||||
@ -1,13 +1,15 @@
|
||||
#include "fsfw_hal/devicehandlers/GyroL3GD20Handler.h"
|
||||
#include "GyroL3GD20Handler.h"
|
||||
|
||||
#include "fsfw/datapool/PoolReadGuard.h"
|
||||
|
||||
#include <cmath>
|
||||
|
||||
GyroHandlerL3GD20H::GyroHandlerL3GD20H(object_id_t objectId, object_id_t deviceCommunication,
|
||||
CookieIF *comCookie, uint8_t switchId, uint32_t transitionDelayMs):
|
||||
CookieIF *comCookie, uint32_t transitionDelayMs):
|
||||
DeviceHandlerBase(objectId, deviceCommunication, comCookie),
|
||||
switchId(switchId), transitionDelayMs(transitionDelayMs), dataset(this) {
|
||||
transitionDelayMs(transitionDelayMs), dataset(this) {
|
||||
#if FSFW_HAL_L3GD20_GYRO_DEBUG == 1
|
||||
debugDivider = new PeriodicOperationDivider(5);
|
||||
debugDivider = new PeriodicOperationDivider(3);
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -215,11 +217,32 @@ ReturnValue_t GyroHandlerL3GD20H::interpretDeviceReply(DeviceCommandId_t id,
|
||||
|
||||
PoolReadGuard readSet(&dataset);
|
||||
if(readSet.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
|
||||
if(std::abs(angVelocX) < this->absLimitX) {
|
||||
dataset.angVelocX = angVelocX;
|
||||
dataset.angVelocX.setValid(true);
|
||||
}
|
||||
else {
|
||||
dataset.angVelocX.setValid(false);
|
||||
}
|
||||
|
||||
if(std::abs(angVelocY) < this->absLimitY) {
|
||||
dataset.angVelocY = angVelocY;
|
||||
dataset.angVelocY.setValid(true);
|
||||
}
|
||||
else {
|
||||
dataset.angVelocY.setValid(false);
|
||||
}
|
||||
|
||||
if(std::abs(angVelocZ) < this->absLimitZ) {
|
||||
dataset.angVelocZ = angVelocZ;
|
||||
dataset.angVelocZ.setValid(true);
|
||||
}
|
||||
else {
|
||||
dataset.angVelocZ.setValid(false);
|
||||
}
|
||||
|
||||
dataset.temperature = temperature;
|
||||
dataset.setValidity(true, true);
|
||||
dataset.temperature.setValid(true);
|
||||
}
|
||||
break;
|
||||
}
|
||||
@ -234,7 +257,7 @@ uint32_t GyroHandlerL3GD20H::getTransitionDelayMs(Mode_t from, Mode_t to) {
|
||||
return this->transitionDelayMs;
|
||||
}
|
||||
|
||||
void GyroHandlerL3GD20H::setGoNormalModeAtStartup() {
|
||||
void GyroHandlerL3GD20H::setToGoToNormalMode(bool enable) {
|
||||
this->goNormalModeImmediately = true;
|
||||
}
|
||||
|
||||
@ -256,3 +279,9 @@ void GyroHandlerL3GD20H::fillCommandAndReplyMap() {
|
||||
void GyroHandlerL3GD20H::modeChanged() {
|
||||
internalState = InternalState::NONE;
|
||||
}
|
||||
|
||||
void GyroHandlerL3GD20H::setAbsoluteLimits(float limitX, float limitY, float limitZ) {
|
||||
this->absLimitX = limitX;
|
||||
this->absLimitY = limitY;
|
||||
this->absLimitZ = limitZ;
|
||||
}
|
||||
|
||||
@ -19,13 +19,22 @@
|
||||
class GyroHandlerL3GD20H: public DeviceHandlerBase {
|
||||
public:
|
||||
GyroHandlerL3GD20H(object_id_t objectId, object_id_t deviceCommunication,
|
||||
CookieIF* comCookie, uint8_t switchId, uint32_t transitionDelayMs = 10000);
|
||||
CookieIF* comCookie, uint32_t transitionDelayMs);
|
||||
virtual ~GyroHandlerL3GD20H();
|
||||
|
||||
/**
|
||||
* Set the absolute limit for the values on the axis in degrees per second.
|
||||
* The dataset values will be marked as invalid if that limit is exceeded
|
||||
* @param xLimit
|
||||
* @param yLimit
|
||||
* @param zLimit
|
||||
*/
|
||||
void setAbsoluteLimits(float limitX, float limitY, float limitZ);
|
||||
|
||||
/**
|
||||
* @brief Configure device handler to go to normal mode immediately
|
||||
*/
|
||||
void setGoNormalModeAtStartup();
|
||||
void setToGoToNormalMode(bool enable);
|
||||
protected:
|
||||
|
||||
/* DeviceHandlerBase overrides */
|
||||
@ -40,20 +49,23 @@ protected:
|
||||
size_t commandDataLen) override;
|
||||
ReturnValue_t scanForReply(const uint8_t *start, size_t len,
|
||||
DeviceCommandId_t *foundId, size_t *foundLen) override;
|
||||
ReturnValue_t interpretDeviceReply(DeviceCommandId_t id,
|
||||
virtual ReturnValue_t interpretDeviceReply(DeviceCommandId_t id,
|
||||
const uint8_t *packet) override;
|
||||
|
||||
void fillCommandAndReplyMap() override;
|
||||
void modeChanged() override;
|
||||
uint32_t getTransitionDelayMs(Mode_t from, Mode_t to) override;
|
||||
virtual uint32_t getTransitionDelayMs(Mode_t from, Mode_t to) override;
|
||||
ReturnValue_t initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
|
||||
LocalDataPoolManager &poolManager) override;
|
||||
|
||||
private:
|
||||
uint8_t switchId = 0;
|
||||
uint32_t transitionDelayMs = 0;
|
||||
GyroPrimaryDataset dataset;
|
||||
|
||||
float absLimitX = L3GD20H::RANGE_DPS_00;
|
||||
float absLimitY = L3GD20H::RANGE_DPS_00;
|
||||
float absLimitZ = L3GD20H::RANGE_DPS_00;
|
||||
|
||||
enum class InternalState {
|
||||
NONE,
|
||||
CONFIGURE,
|
||||
|
||||
520
hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.cpp
Normal file
520
hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.cpp
Normal file
@ -0,0 +1,520 @@
|
||||
#include "MgmLIS3MDLHandler.h"
|
||||
|
||||
#include "fsfw/datapool/PoolReadGuard.h"
|
||||
#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
|
||||
#include "fsfw/globalfunctions/PeriodicOperationDivider.h"
|
||||
#endif
|
||||
|
||||
#include <cmath>
|
||||
|
||||
MgmLIS3MDLHandler::MgmLIS3MDLHandler(object_id_t objectId, object_id_t deviceCommunication,
|
||||
CookieIF* comCookie, uint32_t transitionDelay):
|
||||
DeviceHandlerBase(objectId, deviceCommunication, comCookie),
|
||||
dataset(this), transitionDelay(transitionDelay) {
|
||||
#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
|
||||
debugDivider = new PeriodicOperationDivider(3);
|
||||
#endif
|
||||
// Set to default values right away
|
||||
registers[0] = MGMLIS3MDL::CTRL_REG1_DEFAULT;
|
||||
registers[1] = MGMLIS3MDL::CTRL_REG2_DEFAULT;
|
||||
registers[2] = MGMLIS3MDL::CTRL_REG3_DEFAULT;
|
||||
registers[3] = MGMLIS3MDL::CTRL_REG4_DEFAULT;
|
||||
registers[4] = MGMLIS3MDL::CTRL_REG5_DEFAULT;
|
||||
|
||||
}
|
||||
|
||||
MgmLIS3MDLHandler::~MgmLIS3MDLHandler() {
|
||||
}
|
||||
|
||||
|
||||
void MgmLIS3MDLHandler::doStartUp() {
|
||||
switch (internalState) {
|
||||
case(InternalState::STATE_NONE): {
|
||||
internalState = InternalState::STATE_FIRST_CONTACT;
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_FIRST_CONTACT): {
|
||||
/* Will be set by checking device ID (WHO AM I register) */
|
||||
if(commandExecuted) {
|
||||
commandExecuted = false;
|
||||
internalState = InternalState::STATE_SETUP;
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_SETUP): {
|
||||
internalState = InternalState::STATE_CHECK_REGISTERS;
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_CHECK_REGISTERS): {
|
||||
/* Set up cached registers which will be used to configure the MGM. */
|
||||
if(commandExecuted) {
|
||||
commandExecuted = false;
|
||||
if(goToNormalMode) {
|
||||
setMode(MODE_NORMAL);
|
||||
}
|
||||
else {
|
||||
setMode(_MODE_TO_ON);
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::doShutDown() {
|
||||
setMode(_MODE_POWER_DOWN);
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::buildTransitionDeviceCommand(
|
||||
DeviceCommandId_t *id) {
|
||||
switch (internalState) {
|
||||
case(InternalState::STATE_NONE):
|
||||
case(InternalState::STATE_NORMAL): {
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
case(InternalState::STATE_FIRST_CONTACT): {
|
||||
*id = MGMLIS3MDL::IDENTIFY_DEVICE;
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_SETUP): {
|
||||
*id = MGMLIS3MDL::SETUP_MGM;
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_CHECK_REGISTERS): {
|
||||
*id = MGMLIS3MDL::READ_CONFIG_AND_DATA;
|
||||
break;
|
||||
}
|
||||
default: {
|
||||
/* might be a configuration error. */
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::warning << "GyroHandler::buildTransitionDeviceCommand: Unknown internal state!" <<
|
||||
std::endl;
|
||||
#else
|
||||
sif::printWarning("GyroHandler::buildTransitionDeviceCommand: Unknown internal state!\n");
|
||||
#endif /* FSFW_CPP_OSTREAM_ENABLED == 1 */
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
}
|
||||
return buildCommandFromCommand(*id, NULL, 0);
|
||||
}
|
||||
|
||||
uint8_t MgmLIS3MDLHandler::readCommand(uint8_t command, bool continuousCom) {
|
||||
command |= (1 << MGMLIS3MDL::RW_BIT);
|
||||
if (continuousCom == true) {
|
||||
command |= (1 << MGMLIS3MDL::MS_BIT);
|
||||
}
|
||||
return command;
|
||||
}
|
||||
|
||||
uint8_t MgmLIS3MDLHandler::writeCommand(uint8_t command, bool continuousCom) {
|
||||
command &= ~(1 << MGMLIS3MDL::RW_BIT);
|
||||
if (continuousCom == true) {
|
||||
command |= (1 << MGMLIS3MDL::MS_BIT);
|
||||
}
|
||||
return command;
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::setupMgm() {
|
||||
|
||||
registers[0] = MGMLIS3MDL::CTRL_REG1_DEFAULT;
|
||||
registers[1] = MGMLIS3MDL::CTRL_REG2_DEFAULT;
|
||||
registers[2] = MGMLIS3MDL::CTRL_REG3_DEFAULT;
|
||||
registers[3] = MGMLIS3MDL::CTRL_REG4_DEFAULT;
|
||||
registers[4] = MGMLIS3MDL::CTRL_REG5_DEFAULT;
|
||||
|
||||
prepareCtrlRegisterWrite();
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::buildNormalDeviceCommand(
|
||||
DeviceCommandId_t *id) {
|
||||
// Data/config register will be read in an alternating manner.
|
||||
if(communicationStep == CommunicationStep::DATA) {
|
||||
*id = MGMLIS3MDL::READ_CONFIG_AND_DATA;
|
||||
communicationStep = CommunicationStep::TEMPERATURE;
|
||||
return buildCommandFromCommand(*id, NULL, 0);
|
||||
}
|
||||
else {
|
||||
*id = MGMLIS3MDL::READ_TEMPERATURE;
|
||||
communicationStep = CommunicationStep::DATA;
|
||||
return buildCommandFromCommand(*id, NULL, 0);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::buildCommandFromCommand(
|
||||
DeviceCommandId_t deviceCommand, const uint8_t *commandData,
|
||||
size_t commandDataLen) {
|
||||
switch(deviceCommand) {
|
||||
case(MGMLIS3MDL::READ_CONFIG_AND_DATA): {
|
||||
std::memset(commandBuffer, 0, sizeof(commandBuffer));
|
||||
commandBuffer[0] = readCommand(MGMLIS3MDL::CTRL_REG1, true);
|
||||
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = MGMLIS3MDL::NR_OF_DATA_AND_CFG_REGISTERS + 1;
|
||||
return RETURN_OK;
|
||||
}
|
||||
case(MGMLIS3MDL::READ_TEMPERATURE): {
|
||||
std::memset(commandBuffer, 0, 3);
|
||||
commandBuffer[0] = readCommand(MGMLIS3MDL::TEMP_LOWBYTE, true);
|
||||
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = 3;
|
||||
return RETURN_OK;
|
||||
}
|
||||
case(MGMLIS3MDL::IDENTIFY_DEVICE): {
|
||||
return identifyDevice();
|
||||
}
|
||||
case(MGMLIS3MDL::TEMP_SENSOR_ENABLE): {
|
||||
return enableTemperatureSensor(commandData, commandDataLen);
|
||||
}
|
||||
case(MGMLIS3MDL::SETUP_MGM): {
|
||||
setupMgm();
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
case(MGMLIS3MDL::ACCURACY_OP_MODE_SET): {
|
||||
return setOperatingMode(commandData, commandDataLen);
|
||||
}
|
||||
default:
|
||||
return DeviceHandlerIF::COMMAND_NOT_IMPLEMENTED;
|
||||
}
|
||||
return HasReturnvaluesIF::RETURN_FAILED;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::identifyDevice() {
|
||||
uint32_t size = 2;
|
||||
commandBuffer[0] = readCommand(MGMLIS3MDL::IDENTIFY_DEVICE_REG_ADDR);
|
||||
commandBuffer[1] = 0x00;
|
||||
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = size;
|
||||
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::scanForReply(const uint8_t *start,
|
||||
size_t len, DeviceCommandId_t *foundId, size_t *foundLen) {
|
||||
*foundLen = len;
|
||||
if (len == MGMLIS3MDL::NR_OF_DATA_AND_CFG_REGISTERS + 1) {
|
||||
*foundLen = len;
|
||||
*foundId = MGMLIS3MDL::READ_CONFIG_AND_DATA;
|
||||
// Check validity by checking config registers
|
||||
if (start[1] != registers[0] or start[2] != registers[1] or
|
||||
start[3] != registers[2] or start[4] != registers[3] or
|
||||
start[5] != registers[4]) {
|
||||
#if FSFW_VERBOSE_LEVEL >= 1
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::warning << "MGMHandlerLIS3MDL::scanForReply: Invalid registers!" << std::endl;
|
||||
#else
|
||||
sif::printWarning("MGMHandlerLIS3MDL::scanForReply: Invalid registers!\n");
|
||||
#endif
|
||||
#endif
|
||||
return DeviceHandlerIF::INVALID_DATA;
|
||||
}
|
||||
if(mode == _MODE_START_UP) {
|
||||
commandExecuted = true;
|
||||
}
|
||||
|
||||
}
|
||||
else if(len == MGMLIS3MDL::TEMPERATURE_REPLY_LEN) {
|
||||
*foundLen = len;
|
||||
*foundId = MGMLIS3MDL::READ_TEMPERATURE;
|
||||
}
|
||||
else if (len == MGMLIS3MDL::SETUP_REPLY_LEN) {
|
||||
*foundLen = len;
|
||||
*foundId = MGMLIS3MDL::SETUP_MGM;
|
||||
}
|
||||
else if (len == SINGLE_COMMAND_ANSWER_LEN) {
|
||||
*foundLen = len;
|
||||
*foundId = getPendingCommand();
|
||||
if(*foundId == MGMLIS3MDL::IDENTIFY_DEVICE) {
|
||||
if(start[1] != MGMLIS3MDL::DEVICE_ID) {
|
||||
#if FSFW_VERBOSE_LEVEL >= 1
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::warning << "MGMHandlerLIS3MDL::scanForReply: "
|
||||
"Device identification failed!" << std::endl;
|
||||
#else
|
||||
sif::printWarning("MGMHandlerLIS3MDL::scanForReply: "
|
||||
"Device identification failed!\n");
|
||||
#endif
|
||||
#endif
|
||||
return DeviceHandlerIF::INVALID_DATA;
|
||||
}
|
||||
|
||||
if(mode == _MODE_START_UP) {
|
||||
commandExecuted = true;
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
return DeviceHandlerIF::INVALID_DATA;
|
||||
}
|
||||
|
||||
/* Data with SPI Interface always has this answer */
|
||||
if (start[0] == 0b11111111) {
|
||||
return RETURN_OK;
|
||||
}
|
||||
else {
|
||||
return DeviceHandlerIF::INVALID_DATA;
|
||||
}
|
||||
|
||||
}
|
||||
ReturnValue_t MgmLIS3MDLHandler::interpretDeviceReply(DeviceCommandId_t id,
|
||||
const uint8_t *packet) {
|
||||
|
||||
switch (id) {
|
||||
case MGMLIS3MDL::IDENTIFY_DEVICE: {
|
||||
break;
|
||||
}
|
||||
case MGMLIS3MDL::SETUP_MGM: {
|
||||
break;
|
||||
}
|
||||
case MGMLIS3MDL::READ_CONFIG_AND_DATA: {
|
||||
// TODO: Store configuration in new local datasets.
|
||||
float sensitivityFactor = getSensitivityFactor(getSensitivity(registers[2]));
|
||||
|
||||
int16_t mgmMeasurementRawX = packet[MGMLIS3MDL::X_HIGHBYTE_IDX] << 8
|
||||
| packet[MGMLIS3MDL::X_LOWBYTE_IDX] ;
|
||||
int16_t mgmMeasurementRawY = packet[MGMLIS3MDL::Y_HIGHBYTE_IDX] << 8
|
||||
| packet[MGMLIS3MDL::Y_LOWBYTE_IDX] ;
|
||||
int16_t mgmMeasurementRawZ = packet[MGMLIS3MDL::Z_HIGHBYTE_IDX] << 8
|
||||
| packet[MGMLIS3MDL::Z_LOWBYTE_IDX] ;
|
||||
|
||||
/* Target value in microtesla */
|
||||
float mgmX = static_cast<float>(mgmMeasurementRawX) * sensitivityFactor
|
||||
* MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
|
||||
float mgmY = static_cast<float>(mgmMeasurementRawY) * sensitivityFactor
|
||||
* MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
|
||||
float mgmZ = static_cast<float>(mgmMeasurementRawZ) * sensitivityFactor
|
||||
* MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
|
||||
|
||||
#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
|
||||
if(debugDivider->checkAndIncrement()) {
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::info << "MGMHandlerLIS3: Magnetic field strength in"
|
||||
" microtesla:" << std::endl;
|
||||
sif::info << "X: " << mgmX << " uT" << std::endl;
|
||||
sif::info << "Y: " << mgmY << " uT" << std::endl;
|
||||
sif::info << "Z: " << mgmZ << " uT" << std::endl;
|
||||
#else
|
||||
sif::printInfo("MGMHandlerLIS3: Magnetic field strength in microtesla:\n");
|
||||
sif::printInfo("X: %f uT\n", mgmX);
|
||||
sif::printInfo("Y: %f uT\n", mgmY);
|
||||
sif::printInfo("Z: %f uT\n", mgmZ);
|
||||
#endif /* FSFW_CPP_OSTREAM_ENABLED == 0 */
|
||||
}
|
||||
#endif /* OBSW_VERBOSE_LEVEL >= 1 */
|
||||
PoolReadGuard readHelper(&dataset);
|
||||
if(readHelper.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
|
||||
if(std::abs(mgmX) < absLimitX) {
|
||||
dataset.fieldStrengthX = mgmX;
|
||||
dataset.fieldStrengthX.setValid(true);
|
||||
}
|
||||
else {
|
||||
dataset.fieldStrengthX.setValid(false);
|
||||
}
|
||||
|
||||
if(std::abs(mgmY) < absLimitY) {
|
||||
dataset.fieldStrengthY = mgmY;
|
||||
dataset.fieldStrengthY.setValid(true);
|
||||
}
|
||||
else {
|
||||
dataset.fieldStrengthY.setValid(false);
|
||||
}
|
||||
|
||||
if(std::abs(mgmZ) < absLimitZ) {
|
||||
dataset.fieldStrengthZ = mgmZ;
|
||||
dataset.fieldStrengthZ.setValid(true);
|
||||
}
|
||||
else {
|
||||
dataset.fieldStrengthZ.setValid(false);
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
case MGMLIS3MDL::READ_TEMPERATURE: {
|
||||
int16_t tempValueRaw = packet[2] << 8 | packet[1];
|
||||
float tempValue = 25.0 + ((static_cast<float>(tempValueRaw)) / 8.0);
|
||||
#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
|
||||
if(debugDivider->check()) {
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::info << "MGMHandlerLIS3: Temperature: " << tempValue << " C" <<
|
||||
std::endl;
|
||||
#else
|
||||
sif::printInfo("MGMHandlerLIS3: Temperature: %f C\n");
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
ReturnValue_t result = dataset.read();
|
||||
if(result == HasReturnvaluesIF::RETURN_OK) {
|
||||
dataset.temperature = tempValue;
|
||||
dataset.commit();
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
default: {
|
||||
return DeviceHandlerIF::UNKNOWN_DEVICE_REPLY;
|
||||
}
|
||||
|
||||
}
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
MGMLIS3MDL::Sensitivies MgmLIS3MDLHandler::getSensitivity(uint8_t ctrlRegister2) {
|
||||
bool fs0Set = ctrlRegister2 & (1 << MGMLIS3MDL::FSO); // Checks if FS0 bit is set
|
||||
bool fs1Set = ctrlRegister2 & (1 << MGMLIS3MDL::FS1); // Checks if FS1 bit is set
|
||||
|
||||
if (fs0Set && fs1Set)
|
||||
return MGMLIS3MDL::Sensitivies::GAUSS_16;
|
||||
else if (!fs0Set && fs1Set)
|
||||
return MGMLIS3MDL::Sensitivies::GAUSS_12;
|
||||
else if (fs0Set && !fs1Set)
|
||||
return MGMLIS3MDL::Sensitivies::GAUSS_8;
|
||||
else
|
||||
return MGMLIS3MDL::Sensitivies::GAUSS_4;
|
||||
}
|
||||
|
||||
float MgmLIS3MDLHandler::getSensitivityFactor(MGMLIS3MDL::Sensitivies sens) {
|
||||
switch(sens) {
|
||||
case(MGMLIS3MDL::GAUSS_4): {
|
||||
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_4_SENS;
|
||||
}
|
||||
case(MGMLIS3MDL::GAUSS_8): {
|
||||
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_8_SENS;
|
||||
}
|
||||
case(MGMLIS3MDL::GAUSS_12): {
|
||||
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_12_SENS;
|
||||
}
|
||||
case(MGMLIS3MDL::GAUSS_16): {
|
||||
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_16_SENS;
|
||||
}
|
||||
default: {
|
||||
// Should never happen
|
||||
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_4_SENS;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::enableTemperatureSensor(
|
||||
const uint8_t *commandData, size_t commandDataLen) {
|
||||
triggerEvent(CHANGE_OF_SETUP_PARAMETER);
|
||||
uint32_t size = 2;
|
||||
commandBuffer[0] = writeCommand(MGMLIS3MDL::CTRL_REG1);
|
||||
if (commandDataLen > 1) {
|
||||
return INVALID_NUMBER_OR_LENGTH_OF_PARAMETERS;
|
||||
}
|
||||
switch (*commandData) {
|
||||
case (MGMLIS3MDL::ON): {
|
||||
commandBuffer[1] = registers[0] | (1 << 7);
|
||||
break;
|
||||
}
|
||||
case (MGMLIS3MDL::OFF): {
|
||||
commandBuffer[1] = registers[0] & ~(1 << 7);
|
||||
break;
|
||||
}
|
||||
default:
|
||||
return INVALID_COMMAND_PARAMETER;
|
||||
}
|
||||
registers[0] = commandBuffer[1];
|
||||
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = size;
|
||||
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::setOperatingMode(const uint8_t *commandData,
|
||||
size_t commandDataLen) {
|
||||
triggerEvent(CHANGE_OF_SETUP_PARAMETER);
|
||||
if (commandDataLen != 1) {
|
||||
return INVALID_NUMBER_OR_LENGTH_OF_PARAMETERS;
|
||||
}
|
||||
|
||||
switch (commandData[0]) {
|
||||
case MGMLIS3MDL::LOW:
|
||||
registers[0] = (registers[0] & (~(1 << MGMLIS3MDL::OM1))) & (~(1 << MGMLIS3MDL::OM0));
|
||||
registers[3] = (registers[3] & (~(1 << MGMLIS3MDL::OMZ1))) & (~(1 << MGMLIS3MDL::OMZ0));
|
||||
break;
|
||||
case MGMLIS3MDL::MEDIUM:
|
||||
registers[0] = (registers[0] & (~(1 << MGMLIS3MDL::OM1))) | (1 << MGMLIS3MDL::OM0);
|
||||
registers[3] = (registers[3] & (~(1 << MGMLIS3MDL::OMZ1))) | (1 << MGMLIS3MDL::OMZ0);
|
||||
break;
|
||||
|
||||
case MGMLIS3MDL::HIGH:
|
||||
registers[0] = (registers[0] | (1 << MGMLIS3MDL::OM1)) & (~(1 << MGMLIS3MDL::OM0));
|
||||
registers[3] = (registers[3] | (1 << MGMLIS3MDL::OMZ1)) & (~(1 << MGMLIS3MDL::OMZ0));
|
||||
break;
|
||||
|
||||
case MGMLIS3MDL::ULTRA:
|
||||
registers[0] = (registers[0] | (1 << MGMLIS3MDL::OM1)) | (1 << MGMLIS3MDL::OM0);
|
||||
registers[3] = (registers[3] | (1 << MGMLIS3MDL::OMZ1)) | (1 << MGMLIS3MDL::OMZ0);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return prepareCtrlRegisterWrite();
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::fillCommandAndReplyMap() {
|
||||
insertInCommandAndReplyMap(MGMLIS3MDL::READ_CONFIG_AND_DATA, 1, &dataset);
|
||||
insertInCommandAndReplyMap(MGMLIS3MDL::READ_TEMPERATURE, 1);
|
||||
insertInCommandAndReplyMap(MGMLIS3MDL::SETUP_MGM, 1);
|
||||
insertInCommandAndReplyMap(MGMLIS3MDL::IDENTIFY_DEVICE, 1);
|
||||
insertInCommandAndReplyMap(MGMLIS3MDL::TEMP_SENSOR_ENABLE, 1);
|
||||
insertInCommandAndReplyMap(MGMLIS3MDL::ACCURACY_OP_MODE_SET, 1);
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::setToGoToNormalMode(bool enable) {
|
||||
this->goToNormalMode = enable;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::prepareCtrlRegisterWrite() {
|
||||
commandBuffer[0] = writeCommand(MGMLIS3MDL::CTRL_REG1, true);
|
||||
|
||||
for (size_t i = 0; i < MGMLIS3MDL::NR_OF_CTRL_REGISTERS; i++) {
|
||||
commandBuffer[i + 1] = registers[i];
|
||||
}
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = MGMLIS3MDL::NR_OF_CTRL_REGISTERS + 1;
|
||||
|
||||
// We dont have to check if this is working because we just did i
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
|
||||
|
||||
}
|
||||
|
||||
uint32_t MgmLIS3MDLHandler::getTransitionDelayMs(Mode_t from, Mode_t to) {
|
||||
return transitionDelay;
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::modeChanged(void) {
|
||||
internalState = InternalState::STATE_NONE;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmLIS3MDLHandler::initializeLocalDataPool(
|
||||
localpool::DataPool &localDataPoolMap, LocalDataPoolManager &poolManager) {
|
||||
localDataPoolMap.emplace(MGMLIS3MDL::FIELD_STRENGTH_X,
|
||||
new PoolEntry<float>({0.0}));
|
||||
localDataPoolMap.emplace(MGMLIS3MDL::FIELD_STRENGTH_Y,
|
||||
new PoolEntry<float>({0.0}));
|
||||
localDataPoolMap.emplace(MGMLIS3MDL::FIELD_STRENGTH_Z,
|
||||
new PoolEntry<float>({0.0}));
|
||||
localDataPoolMap.emplace(MGMLIS3MDL::TEMPERATURE_CELCIUS,
|
||||
new PoolEntry<float>({0.0}));
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
void MgmLIS3MDLHandler::setAbsoluteLimits(float xLimit, float yLimit, float zLimit) {
|
||||
this->absLimitX = xLimit;
|
||||
this->absLimitY = yLimit;
|
||||
this->absLimitZ = zLimit;
|
||||
}
|
||||
186
hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
Normal file
186
hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
Normal file
@ -0,0 +1,186 @@
|
||||
#ifndef MISSION_DEVICES_MGMLIS3MDLHANDLER_H_
|
||||
#define MISSION_DEVICES_MGMLIS3MDLHANDLER_H_
|
||||
|
||||
#include "fsfw/FSFW.h"
|
||||
#include "events/subsystemIdRanges.h"
|
||||
#include "devicedefinitions/MgmLIS3HandlerDefs.h"
|
||||
|
||||
#include "fsfw/devicehandlers/DeviceHandlerBase.h"
|
||||
|
||||
class PeriodicOperationDivider;
|
||||
|
||||
/**
|
||||
* @brief Device handler object for the LIS3MDL 3-axis magnetometer
|
||||
* by STMicroeletronics
|
||||
* @details
|
||||
* Datasheet can be found online by googling LIS3MDL.
|
||||
* Flight manual:
|
||||
* https://egit.irs.uni-stuttgart.de/redmine/projects/eive-flight-manual/wiki/LIS3MDL_MGM
|
||||
* @author L. Loidold, R. Mueller
|
||||
*/
|
||||
class MgmLIS3MDLHandler: public DeviceHandlerBase {
|
||||
public:
|
||||
enum class CommunicationStep {
|
||||
DATA,
|
||||
TEMPERATURE
|
||||
};
|
||||
|
||||
static const uint8_t INTERFACE_ID = CLASS_ID::MGM_LIS3MDL;
|
||||
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::MGM_LIS3MDL;
|
||||
//Notifies a command to change the setup parameters
|
||||
static const Event CHANGE_OF_SETUP_PARAMETER = MAKE_EVENT(0, severity::LOW);
|
||||
|
||||
MgmLIS3MDLHandler(uint32_t objectId, object_id_t deviceCommunication, CookieIF* comCookie,
|
||||
uint32_t transitionDelay);
|
||||
virtual ~MgmLIS3MDLHandler();
|
||||
|
||||
/**
|
||||
* Set the absolute limit for the values on the axis in microtesla. The dataset values will
|
||||
* be marked as invalid if that limit is exceeded
|
||||
* @param xLimit
|
||||
* @param yLimit
|
||||
* @param zLimit
|
||||
*/
|
||||
void setAbsoluteLimits(float xLimit, float yLimit, float zLimit);
|
||||
void setToGoToNormalMode(bool enable);
|
||||
|
||||
protected:
|
||||
|
||||
/** DeviceHandlerBase overrides */
|
||||
void doShutDown() override;
|
||||
void doStartUp() override;
|
||||
void doTransition(Mode_t modeFrom, Submode_t subModeFrom) override;
|
||||
virtual uint32_t getTransitionDelayMs(Mode_t from, Mode_t to) override;
|
||||
ReturnValue_t buildCommandFromCommand(
|
||||
DeviceCommandId_t deviceCommand, const uint8_t *commandData,
|
||||
size_t commandDataLen) override;
|
||||
ReturnValue_t buildTransitionDeviceCommand(
|
||||
DeviceCommandId_t *id) override;
|
||||
ReturnValue_t buildNormalDeviceCommand(
|
||||
DeviceCommandId_t *id) override;
|
||||
ReturnValue_t scanForReply(const uint8_t *start, size_t len,
|
||||
DeviceCommandId_t *foundId, size_t *foundLen) override;
|
||||
/**
|
||||
* This implementation is tailored towards space applications and will flag values larger
|
||||
* than 100 microtesla on X,Y and 150 microtesla on Z as invalid
|
||||
* @param id
|
||||
* @param packet
|
||||
* @return
|
||||
*/
|
||||
virtual ReturnValue_t interpretDeviceReply(DeviceCommandId_t id,
|
||||
const uint8_t *packet) override;
|
||||
void fillCommandAndReplyMap() override;
|
||||
void modeChanged(void) override;
|
||||
ReturnValue_t initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
|
||||
LocalDataPoolManager &poolManager) override;
|
||||
|
||||
private:
|
||||
MGMLIS3MDL::MgmPrimaryDataset dataset;
|
||||
//Length a single command SPI answer
|
||||
static const uint8_t SINGLE_COMMAND_ANSWER_LEN = 2;
|
||||
|
||||
uint32_t transitionDelay;
|
||||
// Single SPI command has 2 bytes, first for adress, second for content
|
||||
size_t singleComandSize = 2;
|
||||
// Has the size for all adresses of the lis3mdl + the continous write bit
|
||||
uint8_t commandBuffer[MGMLIS3MDL::NR_OF_DATA_AND_CFG_REGISTERS + 1];
|
||||
|
||||
float absLimitX = 100;
|
||||
float absLimitY = 100;
|
||||
float absLimitZ = 150;
|
||||
|
||||
/**
|
||||
* We want to save the registers we set, so we dont have to read the
|
||||
* registers when we want to change something.
|
||||
* --> everytime we change set a register we have to save it
|
||||
*/
|
||||
uint8_t registers[MGMLIS3MDL::NR_OF_CTRL_REGISTERS];
|
||||
|
||||
uint8_t statusRegister = 0;
|
||||
bool goToNormalMode = false;
|
||||
|
||||
enum class InternalState {
|
||||
STATE_NONE,
|
||||
STATE_FIRST_CONTACT,
|
||||
STATE_SETUP,
|
||||
STATE_CHECK_REGISTERS,
|
||||
STATE_NORMAL
|
||||
};
|
||||
|
||||
InternalState internalState = InternalState::STATE_NONE;
|
||||
CommunicationStep communicationStep = CommunicationStep::DATA;
|
||||
bool commandExecuted = false;
|
||||
|
||||
/*------------------------------------------------------------------------*/
|
||||
/* Device specific commands and variables */
|
||||
/*------------------------------------------------------------------------*/
|
||||
/**
|
||||
* Sets the read bit for the command
|
||||
* @param single command to set the read-bit at
|
||||
* @param boolean to select a continuous read bit, default = false
|
||||
*/
|
||||
uint8_t readCommand(uint8_t command, bool continuousCom = false);
|
||||
|
||||
/**
|
||||
* Sets the write bit for the command
|
||||
* @param single command to set the write-bit at
|
||||
* @param boolean to select a continuous write bit, default = false
|
||||
*/
|
||||
uint8_t writeCommand(uint8_t command, bool continuousCom = false);
|
||||
|
||||
/**
|
||||
* This Method gets the full scale for the measurement range
|
||||
* e.g.: +- 4 gauss. See p.25 datasheet.
|
||||
* @return The ReturnValue does not contain the sign of the value
|
||||
*/
|
||||
MGMLIS3MDL::Sensitivies getSensitivity(uint8_t ctrlReg2);
|
||||
|
||||
/**
|
||||
* The 16 bit value needs to be multiplied with a sensitivity factor
|
||||
* which depends on the sensitivity configuration
|
||||
*
|
||||
* @param sens Configured sensitivity of the LIS3 device
|
||||
* @return Multiplication factor to get the sensor value from raw data.
|
||||
*/
|
||||
float getSensitivityFactor(MGMLIS3MDL::Sensitivies sens);
|
||||
|
||||
/**
|
||||
* This Command detects the device ID
|
||||
*/
|
||||
ReturnValue_t identifyDevice();
|
||||
|
||||
virtual void setupMgm();
|
||||
|
||||
/*------------------------------------------------------------------------*/
|
||||
/* Non normal commands */
|
||||
/*------------------------------------------------------------------------*/
|
||||
/**
|
||||
* Enables/Disables the integrated Temperaturesensor
|
||||
* @param commandData On or Off
|
||||
* @param length of the commandData: has to be 1
|
||||
*/
|
||||
virtual ReturnValue_t enableTemperatureSensor(const uint8_t *commandData,
|
||||
size_t commandDataLen);
|
||||
|
||||
/**
|
||||
* Sets the accuracy of the measurement of the axis. The noise is changing.
|
||||
* @param commandData LOW, MEDIUM, HIGH, ULTRA
|
||||
* @param length of the command, has to be 1
|
||||
*/
|
||||
virtual ReturnValue_t setOperatingMode(const uint8_t *commandData,
|
||||
size_t commandDataLen);
|
||||
|
||||
/**
|
||||
* We always update all registers together, so this method updates
|
||||
* the rawpacket and rawpacketLen, so we just manipulate the local
|
||||
* saved register
|
||||
*
|
||||
*/
|
||||
ReturnValue_t prepareCtrlRegisterWrite();
|
||||
|
||||
#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
|
||||
PeriodicOperationDivider* debugDivider;
|
||||
#endif
|
||||
};
|
||||
|
||||
#endif /* MISSION_DEVICES_MGMLIS3MDLHANDLER_H_ */
|
||||
376
hal/src/fsfw_hal/devicehandlers/MgmRM3100Handler.cpp
Normal file
376
hal/src/fsfw_hal/devicehandlers/MgmRM3100Handler.cpp
Normal file
@ -0,0 +1,376 @@
|
||||
#include "MgmRM3100Handler.h"
|
||||
|
||||
#include "fsfw/datapool/PoolReadGuard.h"
|
||||
#include "fsfw/globalfunctions/bitutility.h"
|
||||
#include "fsfw/devicehandlers/DeviceHandlerMessage.h"
|
||||
#include "fsfw/objectmanager/SystemObjectIF.h"
|
||||
#include "fsfw/returnvalues/HasReturnvaluesIF.h"
|
||||
|
||||
|
||||
MgmRM3100Handler::MgmRM3100Handler(object_id_t objectId,
|
||||
object_id_t deviceCommunication, CookieIF* comCookie, uint32_t transitionDelay):
|
||||
DeviceHandlerBase(objectId, deviceCommunication, comCookie),
|
||||
primaryDataset(this), transitionDelay(transitionDelay) {
|
||||
#if FSFW_HAL_RM3100_MGM_DEBUG == 1
|
||||
debugDivider = new PeriodicOperationDivider(3);
|
||||
#endif
|
||||
}
|
||||
|
||||
MgmRM3100Handler::~MgmRM3100Handler() {}
|
||||
|
||||
void MgmRM3100Handler::doStartUp() {
|
||||
switch(internalState) {
|
||||
case(InternalState::NONE): {
|
||||
internalState = InternalState::CONFIGURE_CMM;
|
||||
break;
|
||||
}
|
||||
case(InternalState::CONFIGURE_CMM): {
|
||||
internalState = InternalState::READ_CMM;
|
||||
break;
|
||||
}
|
||||
case(InternalState::READ_CMM): {
|
||||
if(commandExecuted) {
|
||||
internalState = InternalState::STATE_CONFIGURE_TMRC;
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_CONFIGURE_TMRC): {
|
||||
if(commandExecuted) {
|
||||
internalState = InternalState::STATE_READ_TMRC;
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_READ_TMRC): {
|
||||
if(commandExecuted) {
|
||||
internalState = InternalState::NORMAL;
|
||||
if(goToNormalModeAtStartup) {
|
||||
setMode(MODE_NORMAL);
|
||||
}
|
||||
else {
|
||||
setMode(_MODE_TO_ON);
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
default: {
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void MgmRM3100Handler::doShutDown() {
|
||||
setMode(_MODE_POWER_DOWN);
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::buildTransitionDeviceCommand(
|
||||
DeviceCommandId_t *id) {
|
||||
size_t commandLen = 0;
|
||||
switch(internalState) {
|
||||
case(InternalState::NONE):
|
||||
case(InternalState::NORMAL): {
|
||||
return NOTHING_TO_SEND;
|
||||
}
|
||||
case(InternalState::CONFIGURE_CMM): {
|
||||
*id = RM3100::CONFIGURE_CMM;
|
||||
break;
|
||||
}
|
||||
case(InternalState::READ_CMM): {
|
||||
*id = RM3100::READ_CMM;
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_CONFIGURE_TMRC): {
|
||||
commandBuffer[0] = RM3100::TMRC_DEFAULT_VALUE;
|
||||
commandLen = 1;
|
||||
*id = RM3100::CONFIGURE_TMRC;
|
||||
break;
|
||||
}
|
||||
case(InternalState::STATE_READ_TMRC): {
|
||||
*id = RM3100::READ_TMRC;
|
||||
break;
|
||||
}
|
||||
default:
|
||||
#if FSFW_VERBOSE_LEVEL >= 1
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
// Might be a configuration error
|
||||
sif::warning << "MgmRM3100Handler::buildTransitionDeviceCommand: "
|
||||
"Unknown internal state" << std::endl;
|
||||
#else
|
||||
sif::printWarning("MgmRM3100Handler::buildTransitionDeviceCommand: "
|
||||
"Unknown internal state\n");
|
||||
#endif
|
||||
#endif
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
return buildCommandFromCommand(*id, commandBuffer, commandLen);
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::buildCommandFromCommand(DeviceCommandId_t deviceCommand,
|
||||
const uint8_t *commandData, size_t commandDataLen) {
|
||||
switch(deviceCommand) {
|
||||
case(RM3100::CONFIGURE_CMM): {
|
||||
commandBuffer[0] = RM3100::CMM_REGISTER;
|
||||
commandBuffer[1] = RM3100::CMM_VALUE;
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = 2;
|
||||
break;
|
||||
}
|
||||
case(RM3100::READ_CMM): {
|
||||
commandBuffer[0] = RM3100::CMM_REGISTER | RM3100::READ_MASK;
|
||||
commandBuffer[1] = 0;
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = 2;
|
||||
break;
|
||||
}
|
||||
case(RM3100::CONFIGURE_TMRC): {
|
||||
return handleTmrcConfigCommand(deviceCommand, commandData, commandDataLen);
|
||||
}
|
||||
case(RM3100::READ_TMRC): {
|
||||
commandBuffer[0] = RM3100::TMRC_REGISTER | RM3100::READ_MASK;
|
||||
commandBuffer[1] = 0;
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = 2;
|
||||
break;
|
||||
}
|
||||
case(RM3100::CONFIGURE_CYCLE_COUNT): {
|
||||
return handleCycleCountConfigCommand(deviceCommand, commandData, commandDataLen);
|
||||
}
|
||||
case(RM3100::READ_CYCLE_COUNT): {
|
||||
commandBuffer[0] = RM3100::CYCLE_COUNT_START_REGISTER | RM3100::READ_MASK;
|
||||
std::memset(commandBuffer + 1, 0, 6);
|
||||
rawPacket = commandBuffer;
|
||||
rawPacketLen = 7;
|
||||
break;
|
||||
}
|
||||
case(RM3100::READ_DATA): {
|
||||
commandBuffer[0] = RM3100::MEASUREMENT_REG_START | RM3100::READ_MASK;
|
||||
std::memset(commandBuffer + 1, 0, 9);
|
||||
rawPacketLen = 10;
|
||||
break;
|
||||
}
|
||||
default:
|
||||
return DeviceHandlerIF::COMMAND_NOT_IMPLEMENTED;
|
||||
}
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::buildNormalDeviceCommand(
|
||||
DeviceCommandId_t *id) {
|
||||
*id = RM3100::READ_DATA;
|
||||
return buildCommandFromCommand(*id, nullptr, 0);
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::scanForReply(const uint8_t *start,
|
||||
size_t len, DeviceCommandId_t *foundId,
|
||||
size_t *foundLen) {
|
||||
|
||||
// For SPI, ID will always be the one of the last sent command
|
||||
*foundId = this->getPendingCommand();
|
||||
*foundLen = len;
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) {
|
||||
ReturnValue_t result = HasReturnvaluesIF::RETURN_OK;
|
||||
switch(id) {
|
||||
case(RM3100::CONFIGURE_CMM):
|
||||
case(RM3100::CONFIGURE_CYCLE_COUNT):
|
||||
case(RM3100::CONFIGURE_TMRC): {
|
||||
// We can only check whether write was successful with read operation
|
||||
if(mode == _MODE_START_UP) {
|
||||
commandExecuted = true;
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(RM3100::READ_CMM): {
|
||||
uint8_t cmmValue = packet[1];
|
||||
// We clear the seventh bit in any case
|
||||
// because this one is zero sometimes for some reason
|
||||
bitutil::bitClear(&cmmValue, 6);
|
||||
if(cmmValue == cmmRegValue and internalState == InternalState::READ_CMM) {
|
||||
commandExecuted = true;
|
||||
}
|
||||
else {
|
||||
// Attempt reconfiguration
|
||||
internalState = InternalState::CONFIGURE_CMM;
|
||||
return DeviceHandlerIF::DEVICE_REPLY_INVALID;
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(RM3100::READ_TMRC): {
|
||||
if(packet[1] == tmrcRegValue) {
|
||||
commandExecuted = true;
|
||||
// Reading TMRC was commanded. Trigger event to inform ground
|
||||
if(mode != _MODE_START_UP) {
|
||||
triggerEvent(tmrcSet, tmrcRegValue, 0);
|
||||
}
|
||||
}
|
||||
else {
|
||||
// Attempt reconfiguration
|
||||
internalState = InternalState::STATE_CONFIGURE_TMRC;
|
||||
return DeviceHandlerIF::DEVICE_REPLY_INVALID;
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(RM3100::READ_CYCLE_COUNT): {
|
||||
uint16_t cycleCountX = packet[1] << 8 | packet[2];
|
||||
uint16_t cycleCountY = packet[3] << 8 | packet[4];
|
||||
uint16_t cycleCountZ = packet[5] << 8 | packet[6];
|
||||
if(cycleCountX != cycleCountRegValueX or cycleCountY != cycleCountRegValueY or
|
||||
cycleCountZ != cycleCountRegValueZ) {
|
||||
return DeviceHandlerIF::DEVICE_REPLY_INVALID;
|
||||
}
|
||||
// Reading TMRC was commanded. Trigger event to inform ground
|
||||
if(mode != _MODE_START_UP) {
|
||||
uint32_t eventParam1 = (cycleCountX << 16) | cycleCountY;
|
||||
triggerEvent(cycleCountersSet, eventParam1, cycleCountZ);
|
||||
}
|
||||
break;
|
||||
}
|
||||
case(RM3100::READ_DATA): {
|
||||
result = handleDataReadout(packet);
|
||||
break;
|
||||
}
|
||||
default:
|
||||
return DeviceHandlerIF::UNKNOWN_DEVICE_REPLY;
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::handleCycleCountConfigCommand(DeviceCommandId_t deviceCommand,
|
||||
const uint8_t *commandData, size_t commandDataLen) {
|
||||
if(commandData == nullptr) {
|
||||
return DeviceHandlerIF::INVALID_COMMAND_PARAMETER;
|
||||
}
|
||||
|
||||
// Set cycle count
|
||||
if(commandDataLen == 2) {
|
||||
handleCycleCommand(true, commandData, commandDataLen);
|
||||
}
|
||||
else if(commandDataLen == 6) {
|
||||
handleCycleCommand(false, commandData, commandDataLen);
|
||||
}
|
||||
else {
|
||||
return DeviceHandlerIF::INVALID_COMMAND_PARAMETER;
|
||||
}
|
||||
|
||||
commandBuffer[0] = RM3100::CYCLE_COUNT_VALUE;
|
||||
std::memcpy(commandBuffer + 1, &cycleCountRegValueX, 2);
|
||||
std::memcpy(commandBuffer + 3, &cycleCountRegValueY, 2);
|
||||
std::memcpy(commandBuffer + 5, &cycleCountRegValueZ, 2);
|
||||
rawPacketLen = 7;
|
||||
rawPacket = commandBuffer;
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::handleCycleCommand(bool oneCycleValue,
|
||||
const uint8_t *commandData, size_t commandDataLen) {
|
||||
RM3100::CycleCountCommand command(oneCycleValue);
|
||||
ReturnValue_t result = command.deSerialize(&commandData, &commandDataLen,
|
||||
SerializeIF::Endianness::BIG);
|
||||
if(result != HasReturnvaluesIF::RETURN_OK) {
|
||||
return result;
|
||||
}
|
||||
|
||||
// Data sheet p.30 "while noise limits the useful upper range to ~400 cycle counts."
|
||||
if(command.cycleCountX > 450 ) {
|
||||
return DeviceHandlerIF::INVALID_COMMAND_PARAMETER;
|
||||
}
|
||||
|
||||
if(not oneCycleValue and (command.cycleCountY > 450 or command.cycleCountZ > 450)) {
|
||||
return DeviceHandlerIF::INVALID_COMMAND_PARAMETER;
|
||||
}
|
||||
|
||||
cycleCountRegValueX = command.cycleCountX;
|
||||
cycleCountRegValueY = command.cycleCountY;
|
||||
cycleCountRegValueZ = command.cycleCountZ;
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::handleTmrcConfigCommand(DeviceCommandId_t deviceCommand,
|
||||
const uint8_t *commandData, size_t commandDataLen) {
|
||||
if(commandData == nullptr or commandDataLen != 1) {
|
||||
return DeviceHandlerIF::INVALID_COMMAND_PARAMETER;
|
||||
}
|
||||
|
||||
commandBuffer[0] = RM3100::TMRC_REGISTER;
|
||||
commandBuffer[1] = commandData[0];
|
||||
tmrcRegValue = commandData[0];
|
||||
rawPacketLen = 2;
|
||||
rawPacket = commandBuffer;
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
void MgmRM3100Handler::fillCommandAndReplyMap() {
|
||||
insertInCommandAndReplyMap(RM3100::CONFIGURE_CMM, 3);
|
||||
insertInCommandAndReplyMap(RM3100::READ_CMM, 3);
|
||||
|
||||
insertInCommandAndReplyMap(RM3100::CONFIGURE_TMRC, 3);
|
||||
insertInCommandAndReplyMap(RM3100::READ_TMRC, 3);
|
||||
|
||||
insertInCommandAndReplyMap(RM3100::CONFIGURE_CYCLE_COUNT, 3);
|
||||
insertInCommandAndReplyMap(RM3100::READ_CYCLE_COUNT, 3);
|
||||
|
||||
insertInCommandAndReplyMap(RM3100::READ_DATA, 3, &primaryDataset);
|
||||
}
|
||||
|
||||
void MgmRM3100Handler::modeChanged(void) {
|
||||
internalState = InternalState::NONE;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::initializeLocalDataPool(
|
||||
localpool::DataPool &localDataPoolMap, LocalDataPoolManager &poolManager) {
|
||||
localDataPoolMap.emplace(RM3100::FIELD_STRENGTH_X, new PoolEntry<float>({0.0}));
|
||||
localDataPoolMap.emplace(RM3100::FIELD_STRENGTH_Y, new PoolEntry<float>({0.0}));
|
||||
localDataPoolMap.emplace(RM3100::FIELD_STRENGTH_Z, new PoolEntry<float>({0.0}));
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
|
||||
uint32_t MgmRM3100Handler::getTransitionDelayMs(Mode_t from, Mode_t to) {
|
||||
return this->transitionDelay;
|
||||
}
|
||||
|
||||
void MgmRM3100Handler::setToGoToNormalMode(bool enable) {
|
||||
goToNormalModeAtStartup = enable;
|
||||
}
|
||||
|
||||
ReturnValue_t MgmRM3100Handler::handleDataReadout(const uint8_t *packet) {
|
||||
// Analyze data here. The sensor generates 24 bit signed values so we need to do some bitshift
|
||||
// trickery here to calculate the raw values first
|
||||
int32_t fieldStrengthRawX = ((packet[1] << 24) | (packet[2] << 16) | (packet[3] << 8)) >> 8;
|
||||
int32_t fieldStrengthRawY = ((packet[4] << 24) | (packet[5] << 16) | (packet[6] << 8)) >> 8;
|
||||
int32_t fieldStrengthRawZ = ((packet[7] << 24) | (packet[8] << 16) | (packet[3] << 8)) >> 8;
|
||||
|
||||
// Now scale to physical value in microtesla
|
||||
float fieldStrengthX = fieldStrengthRawX * scaleFactorX;
|
||||
float fieldStrengthY = fieldStrengthRawY * scaleFactorX;
|
||||
float fieldStrengthZ = fieldStrengthRawZ * scaleFactorX;
|
||||
|
||||
#if FSFW_HAL_RM3100_MGM_DEBUG == 1
|
||||
if(debugDivider->checkAndIncrement()) {
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::info << "MgmRM3100Handler: Magnetic field strength in"
|
||||
" microtesla:" << std::endl;
|
||||
sif::info << "X: " << fieldStrengthX << " uT" << std::endl;
|
||||
sif::info << "Y: " << fieldStrengthY << " uT" << std::endl;
|
||||
sif::info << "Z: " << fieldStrengthZ << " uT" << std::endl;
|
||||
#else
|
||||
sif::printInfo("MgmRM3100Handler: Magnetic field strength in microtesla:\n");
|
||||
sif::printInfo("X: %f uT\n", fieldStrengthX);
|
||||
sif::printInfo("Y: %f uT\n", fieldStrengthY);
|
||||
sif::printInfo("Z: %f uT\n", fieldStrengthZ);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
// TODO: Sanity check on values?
|
||||
PoolReadGuard readGuard(&primaryDataset);
|
||||
if(readGuard.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
|
||||
primaryDataset.fieldStrengthX = fieldStrengthX;
|
||||
primaryDataset.fieldStrengthY = fieldStrengthY;
|
||||
primaryDataset.fieldStrengthZ = fieldStrengthZ;
|
||||
primaryDataset.setValidity(true, true);
|
||||
}
|
||||
return RETURN_OK;
|
||||
}
|
||||
111
hal/src/fsfw_hal/devicehandlers/MgmRM3100Handler.h
Normal file
111
hal/src/fsfw_hal/devicehandlers/MgmRM3100Handler.h
Normal file
@ -0,0 +1,111 @@
|
||||
#ifndef MISSION_DEVICES_MGMRM3100HANDLER_H_
|
||||
#define MISSION_DEVICES_MGMRM3100HANDLER_H_
|
||||
|
||||
#include "fsfw/FSFW.h"
|
||||
#include "devices/powerSwitcherList.h"
|
||||
#include "devicedefinitions/MgmRM3100HandlerDefs.h"
|
||||
#include "fsfw/devicehandlers/DeviceHandlerBase.h"
|
||||
|
||||
#if FSFW_HAL_RM3100_MGM_DEBUG == 1
|
||||
#include "fsfw/globalfunctions/PeriodicOperationDivider.h"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Device Handler for the RM3100 geomagnetic magnetometer sensor
|
||||
* (https://www.pnicorp.com/rm3100/)
|
||||
* @details
|
||||
* Flight manual:
|
||||
* https://egit.irs.uni-stuttgart.de/redmine/projects/eive-flight-manual/wiki/RM3100_MGM
|
||||
*/
|
||||
class MgmRM3100Handler: public DeviceHandlerBase {
|
||||
public:
|
||||
static const uint8_t INTERFACE_ID = CLASS_ID::MGM_RM3100;
|
||||
|
||||
//! [EXPORT] : [COMMENT] P1: TMRC value which was set, P2: 0
|
||||
static constexpr Event tmrcSet = event::makeEvent(SUBSYSTEM_ID::MGM_RM3100,
|
||||
0x00, severity::INFO);
|
||||
|
||||
//! [EXPORT] : [COMMENT] Cycle counter set. P1: First two bytes new Cycle Count X
|
||||
//! P1: Second two bytes new Cycle Count Y
|
||||
//! P2: New cycle count Z
|
||||
static constexpr Event cycleCountersSet = event::makeEvent(
|
||||
SUBSYSTEM_ID::MGM_RM3100, 0x01, severity::INFO);
|
||||
|
||||
MgmRM3100Handler(object_id_t objectId, object_id_t deviceCommunication,
|
||||
CookieIF* comCookie, uint32_t transitionDelay);
|
||||
virtual ~MgmRM3100Handler();
|
||||
|
||||
/**
|
||||
* Configure device handler to go to normal mode after startup immediately
|
||||
* @param enable
|
||||
*/
|
||||
void setToGoToNormalMode(bool enable);
|
||||
|
||||
protected:
|
||||
|
||||
/* DeviceHandlerBase overrides */
|
||||
ReturnValue_t buildTransitionDeviceCommand(
|
||||
DeviceCommandId_t *id) override;
|
||||
void doStartUp() override;
|
||||
void doShutDown() override;
|
||||
ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;
|
||||
ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand,
|
||||
const uint8_t *commandData, size_t commandDataLen) override;
|
||||
ReturnValue_t scanForReply(const uint8_t *start, size_t len,
|
||||
DeviceCommandId_t *foundId, size_t *foundLen) override;
|
||||
ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) override;
|
||||
|
||||
void fillCommandAndReplyMap() override;
|
||||
void modeChanged(void) override;
|
||||
virtual uint32_t getTransitionDelayMs(Mode_t from, Mode_t to) override;
|
||||
ReturnValue_t initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
|
||||
LocalDataPoolManager &poolManager) override;
|
||||
|
||||
private:
|
||||
|
||||
enum class InternalState {
|
||||
NONE,
|
||||
CONFIGURE_CMM,
|
||||
READ_CMM,
|
||||
// The cycle count states are propably not going to be used because
|
||||
// the default cycle count will be used.
|
||||
STATE_CONFIGURE_CYCLE_COUNT,
|
||||
STATE_READ_CYCLE_COUNT,
|
||||
STATE_CONFIGURE_TMRC,
|
||||
STATE_READ_TMRC,
|
||||
NORMAL
|
||||
};
|
||||
InternalState internalState = InternalState::NONE;
|
||||
bool commandExecuted = false;
|
||||
RM3100::Rm3100PrimaryDataset primaryDataset;
|
||||
|
||||
uint8_t commandBuffer[10];
|
||||
uint8_t commandBufferLen = 0;
|
||||
|
||||
uint8_t cmmRegValue = RM3100::CMM_VALUE;
|
||||
uint8_t tmrcRegValue = RM3100::TMRC_DEFAULT_VALUE;
|
||||
uint16_t cycleCountRegValueX = RM3100::CYCLE_COUNT_VALUE;
|
||||
uint16_t cycleCountRegValueY = RM3100::CYCLE_COUNT_VALUE;
|
||||
uint16_t cycleCountRegValueZ = RM3100::CYCLE_COUNT_VALUE;
|
||||
float scaleFactorX = 1.0 / RM3100::DEFAULT_GAIN;
|
||||
float scaleFactorY = 1.0 / RM3100::DEFAULT_GAIN;
|
||||
float scaleFactorZ = 1.0 / RM3100::DEFAULT_GAIN;
|
||||
|
||||
bool goToNormalModeAtStartup = false;
|
||||
uint32_t transitionDelay;
|
||||
|
||||
ReturnValue_t handleCycleCountConfigCommand(DeviceCommandId_t deviceCommand,
|
||||
const uint8_t *commandData,size_t commandDataLen);
|
||||
ReturnValue_t handleCycleCommand(bool oneCycleValue,
|
||||
const uint8_t *commandData, size_t commandDataLen);
|
||||
|
||||
ReturnValue_t handleTmrcConfigCommand(DeviceCommandId_t deviceCommand,
|
||||
const uint8_t *commandData,size_t commandDataLen);
|
||||
|
||||
ReturnValue_t handleDataReadout(const uint8_t* packet);
|
||||
#if FSFW_HAL_RM3100_MGM_DEBUG == 1
|
||||
PeriodicOperationDivider* debugDivider;
|
||||
#endif
|
||||
};
|
||||
|
||||
#endif /* MISSION_DEVICEHANDLING_MGMRM3100HANDLER_H_ */
|
||||
@ -0,0 +1,178 @@
|
||||
#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_MGMLIS3HANDLERDEFS_H_
|
||||
#define MISSION_DEVICES_DEVICEDEFINITIONS_MGMLIS3HANDLERDEFS_H_
|
||||
|
||||
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
|
||||
#include <fsfw/datapoollocal/LocalPoolVariable.h>
|
||||
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
|
||||
#include <cstdint>
|
||||
|
||||
namespace MGMLIS3MDL {
|
||||
|
||||
enum Set {
|
||||
ON, OFF
|
||||
};
|
||||
enum OpMode {
|
||||
LOW, MEDIUM, HIGH, ULTRA
|
||||
};
|
||||
|
||||
enum Sensitivies: uint8_t {
|
||||
GAUSS_4 = 4,
|
||||
GAUSS_8 = 8,
|
||||
GAUSS_12 = 12,
|
||||
GAUSS_16 = 16
|
||||
};
|
||||
|
||||
/* Actually 15, we just round up a bit */
|
||||
static constexpr size_t MAX_BUFFER_SIZE = 16;
|
||||
|
||||
/* Field data register scaling */
|
||||
static constexpr uint8_t GAUSS_TO_MICROTESLA_FACTOR = 100;
|
||||
static constexpr float FIELD_LSB_PER_GAUSS_4_SENS = 1.0 / 6842.0;
|
||||
static constexpr float FIELD_LSB_PER_GAUSS_8_SENS = 1.0 / 3421.0;
|
||||
static constexpr float FIELD_LSB_PER_GAUSS_12_SENS = 1.0 / 2281.0;
|
||||
static constexpr float FIELD_LSB_PER_GAUSS_16_SENS = 1.0 / 1711.0;
|
||||
|
||||
static const DeviceCommandId_t READ_CONFIG_AND_DATA = 0x00;
|
||||
static const DeviceCommandId_t SETUP_MGM = 0x01;
|
||||
static const DeviceCommandId_t READ_TEMPERATURE = 0x02;
|
||||
static const DeviceCommandId_t IDENTIFY_DEVICE = 0x03;
|
||||
static const DeviceCommandId_t TEMP_SENSOR_ENABLE = 0x04;
|
||||
static const DeviceCommandId_t ACCURACY_OP_MODE_SET = 0x05;
|
||||
|
||||
/* Number of all control registers */
|
||||
static const uint8_t NR_OF_CTRL_REGISTERS = 5;
|
||||
/* Number of registers in the MGM */
|
||||
static const uint8_t NR_OF_REGISTERS = 19;
|
||||
/* Total number of adresses for all registers */
|
||||
static const uint8_t TOTAL_NR_OF_ADRESSES = 52;
|
||||
static const uint8_t NR_OF_DATA_AND_CFG_REGISTERS = 14;
|
||||
static const uint8_t TEMPERATURE_REPLY_LEN = 3;
|
||||
static const uint8_t SETUP_REPLY_LEN = 6;
|
||||
|
||||
/*------------------------------------------------------------------------*/
|
||||
/* Register adresses */
|
||||
/*------------------------------------------------------------------------*/
|
||||
/* Register adress returns identifier of device with default 0b00111101 */
|
||||
static const uint8_t IDENTIFY_DEVICE_REG_ADDR = 0b00001111;
|
||||
static const uint8_t DEVICE_ID = 0b00111101; // Identifier for Device
|
||||
|
||||
/* Register adress to access register 1 */
|
||||
static const uint8_t CTRL_REG1 = 0b00100000;
|
||||
/* Register adress to access register 2 */
|
||||
static const uint8_t CTRL_REG2 = 0b00100001;
|
||||
/* Register adress to access register 3 */
|
||||
static const uint8_t CTRL_REG3 = 0b00100010;
|
||||
/* Register adress to access register 4 */
|
||||
static const uint8_t CTRL_REG4 = 0b00100011;
|
||||
/* Register adress to access register 5 */
|
||||
static const uint8_t CTRL_REG5 = 0b00100100;
|
||||
|
||||
/* Register adress to access status register */
|
||||
static const uint8_t STATUS_REG_IDX = 8;
|
||||
static const uint8_t STATUS_REG = 0b00100111;
|
||||
|
||||
/* Register adress to access low byte of x-axis */
|
||||
static const uint8_t X_LOWBYTE_IDX = 9;
|
||||
static const uint8_t X_LOWBYTE = 0b00101000;
|
||||
/* Register adress to access high byte of x-axis */
|
||||
static const uint8_t X_HIGHBYTE_IDX = 10;
|
||||
static const uint8_t X_HIGHBYTE = 0b00101001;
|
||||
/* Register adress to access low byte of y-axis */
|
||||
static const uint8_t Y_LOWBYTE_IDX = 11;
|
||||
static const uint8_t Y_LOWBYTE = 0b00101010;
|
||||
/* Register adress to access high byte of y-axis */
|
||||
static const uint8_t Y_HIGHBYTE_IDX = 12;
|
||||
static const uint8_t Y_HIGHBYTE = 0b00101011;
|
||||
/* Register adress to access low byte of z-axis */
|
||||
static const uint8_t Z_LOWBYTE_IDX = 13;
|
||||
static const uint8_t Z_LOWBYTE = 0b00101100;
|
||||
/* Register adress to access high byte of z-axis */
|
||||
static const uint8_t Z_HIGHBYTE_IDX = 14;
|
||||
static const uint8_t Z_HIGHBYTE = 0b00101101;
|
||||
|
||||
/* Register adress to access low byte of temperature sensor */
|
||||
static const uint8_t TEMP_LOWBYTE = 0b00101110;
|
||||
/* Register adress to access high byte of temperature sensor */
|
||||
static const uint8_t TEMP_HIGHBYTE = 0b00101111;
|
||||
|
||||
/*------------------------------------------------------------------------*/
|
||||
/* Initialize Setup Register set bits */
|
||||
/*------------------------------------------------------------------------*/
|
||||
/* General transfer bits */
|
||||
// Read=1 / Write=0 Bit
|
||||
static const uint8_t RW_BIT = 7;
|
||||
// Continous Read/Write Bit, increment adress
|
||||
static const uint8_t MS_BIT = 6;
|
||||
|
||||
/* CTRL_REG1 bits */
|
||||
static const uint8_t ST = 0; // Self test enable bit, enabled = 1
|
||||
// Enable rates higher than 80 Hz enabled = 1
|
||||
static const uint8_t FAST_ODR = 1;
|
||||
static const uint8_t DO0 = 2; // Output data rate bit 2
|
||||
static const uint8_t DO1 = 3; // Output data rate bit 3
|
||||
static const uint8_t DO2 = 4; // Output data rate bit 4
|
||||
static const uint8_t OM0 = 5; // XY operating mode bit 5
|
||||
static const uint8_t OM1 = 6; // XY operating mode bit 6
|
||||
static const uint8_t TEMP_EN = 7; // Temperature sensor enable enabled = 1
|
||||
static const uint8_t CTRL_REG1_DEFAULT = (1 << TEMP_EN) | (1 << OM1) |
|
||||
(1 << DO0) | (1 << DO1) | (1 << DO2);
|
||||
|
||||
/* CTRL_REG2 bits */
|
||||
//reset configuration registers and user registers
|
||||
static const uint8_t SOFT_RST = 2;
|
||||
static const uint8_t REBOOT = 3; //reboot memory content
|
||||
static const uint8_t FSO = 5; //full-scale selection bit 5
|
||||
static const uint8_t FS1 = 6; //full-scale selection bit 6
|
||||
static const uint8_t CTRL_REG2_DEFAULT = 0;
|
||||
|
||||
/* CTRL_REG3 bits */
|
||||
static const uint8_t MD0 = 0; //Operating mode bit 0
|
||||
static const uint8_t MD1 = 1; //Operating mode bit 1
|
||||
//SPI serial interface mode selection enabled = 3-wire-mode
|
||||
static const uint8_t SIM = 2;
|
||||
static const uint8_t LP = 5; //low-power mode
|
||||
static const uint8_t CTRL_REG3_DEFAULT = 0;
|
||||
|
||||
/* CTRL_REG4 bits */
|
||||
//big/little endian data selection enabled = MSb at lower adress
|
||||
static const uint8_t BLE = 1;
|
||||
static const uint8_t OMZ0 = 2; //Z operating mode bit 2
|
||||
static const uint8_t OMZ1 = 3; //Z operating mode bit 3
|
||||
static const uint8_t CTRL_REG4_DEFAULT = (1 << OMZ1);
|
||||
|
||||
/* CTRL_REG5 bits */
|
||||
static const uint8_t BDU = 6; //Block data update
|
||||
static const uint8_t FAST_READ = 7; //Fast read enabled = 1
|
||||
static const uint8_t CTRL_REG5_DEFAULT = 0;
|
||||
|
||||
static const uint32_t MGM_DATA_SET_ID = READ_CONFIG_AND_DATA;
|
||||
|
||||
enum MgmPoolIds: lp_id_t {
|
||||
FIELD_STRENGTH_X,
|
||||
FIELD_STRENGTH_Y,
|
||||
FIELD_STRENGTH_Z,
|
||||
TEMPERATURE_CELCIUS
|
||||
};
|
||||
|
||||
class MgmPrimaryDataset: public StaticLocalDataSet<4> {
|
||||
public:
|
||||
MgmPrimaryDataset(HasLocalDataPoolIF* hkOwner):
|
||||
StaticLocalDataSet(hkOwner, MGM_DATA_SET_ID) {}
|
||||
|
||||
MgmPrimaryDataset(object_id_t mgmId):
|
||||
StaticLocalDataSet(sid_t(mgmId, MGM_DATA_SET_ID)) {}
|
||||
|
||||
lp_var_t<float> fieldStrengthX = lp_var_t<float>(sid.objectId,
|
||||
FIELD_STRENGTH_X, this);
|
||||
lp_var_t<float> fieldStrengthY = lp_var_t<float>(sid.objectId,
|
||||
FIELD_STRENGTH_Y, this);
|
||||
lp_var_t<float> fieldStrengthZ = lp_var_t<float>(sid.objectId,
|
||||
FIELD_STRENGTH_Z, this);
|
||||
lp_var_t<float> temperature = lp_var_t<float>(sid.objectId,
|
||||
TEMPERATURE_CELCIUS, this);
|
||||
};
|
||||
|
||||
}
|
||||
|
||||
|
||||
#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_MGMLIS3HANDLERDEFS_H_ */
|
||||
@ -0,0 +1,132 @@
|
||||
#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_MGMHANDLERRM3100DEFINITIONS_H_
|
||||
#define MISSION_DEVICES_DEVICEDEFINITIONS_MGMHANDLERRM3100DEFINITIONS_H_
|
||||
|
||||
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
|
||||
#include <fsfw/datapoollocal/LocalPoolVariable.h>
|
||||
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
|
||||
#include <fsfw/serialize/SerialLinkedListAdapter.h>
|
||||
#include <cstdint>
|
||||
|
||||
namespace RM3100 {
|
||||
|
||||
/* Actually 10, we round up a little bit */
|
||||
static constexpr size_t MAX_BUFFER_SIZE = 12;
|
||||
|
||||
static constexpr uint8_t READ_MASK = 0x80;
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* CMM Register */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
static constexpr uint8_t SET_CMM_CMZ = 1 << 6;
|
||||
static constexpr uint8_t SET_CMM_CMY = 1 << 5;
|
||||
static constexpr uint8_t SET_CMM_CMX = 1 << 4;
|
||||
static constexpr uint8_t SET_CMM_DRDM = 1 << 2;
|
||||
static constexpr uint8_t SET_CMM_START = 1;
|
||||
static constexpr uint8_t CMM_REGISTER = 0x01;
|
||||
|
||||
static constexpr uint8_t CMM_VALUE = SET_CMM_CMZ | SET_CMM_CMY | SET_CMM_CMX |
|
||||
SET_CMM_DRDM | SET_CMM_START;
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Cycle count register */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
// Default value (200)
|
||||
static constexpr uint8_t CYCLE_COUNT_VALUE = 0xC8;
|
||||
|
||||
static constexpr float DEFAULT_GAIN = static_cast<float>(CYCLE_COUNT_VALUE) /
|
||||
100 * 38;
|
||||
static constexpr uint8_t CYCLE_COUNT_START_REGISTER = 0x04;
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* TMRC register */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
static constexpr uint8_t TMRC_150HZ_VALUE = 0x94;
|
||||
static constexpr uint8_t TMRC_75HZ_VALUE = 0x95;
|
||||
static constexpr uint8_t TMRC_DEFAULT_37HZ_VALUE = 0x96;
|
||||
|
||||
static constexpr uint8_t TMRC_REGISTER = 0x0B;
|
||||
static constexpr uint8_t TMRC_DEFAULT_VALUE = TMRC_DEFAULT_37HZ_VALUE;
|
||||
|
||||
static constexpr uint8_t MEASUREMENT_REG_START = 0x24;
|
||||
static constexpr uint8_t BIST_REGISTER = 0x33;
|
||||
static constexpr uint8_t DATA_READY_VAL = 0b1000'0000;
|
||||
static constexpr uint8_t STATUS_REGISTER = 0x34;
|
||||
static constexpr uint8_t REVID_REGISTER = 0x36;
|
||||
|
||||
// Range in Microtesla. 1 T equals 10000 Gauss (for comparison with LIS3 MGM)
|
||||
static constexpr uint16_t RANGE = 800;
|
||||
|
||||
static constexpr DeviceCommandId_t READ_DATA = 0;
|
||||
|
||||
static constexpr DeviceCommandId_t CONFIGURE_CMM = 1;
|
||||
static constexpr DeviceCommandId_t READ_CMM = 2;
|
||||
|
||||
static constexpr DeviceCommandId_t CONFIGURE_TMRC = 3;
|
||||
static constexpr DeviceCommandId_t READ_TMRC = 4;
|
||||
|
||||
static constexpr DeviceCommandId_t CONFIGURE_CYCLE_COUNT = 5;
|
||||
static constexpr DeviceCommandId_t READ_CYCLE_COUNT = 6;
|
||||
|
||||
class CycleCountCommand: public SerialLinkedListAdapter<SerializeIF> {
|
||||
public:
|
||||
CycleCountCommand(bool oneCycleCount = true): oneCycleCount(oneCycleCount) {
|
||||
setLinks(oneCycleCount);
|
||||
}
|
||||
|
||||
ReturnValue_t deSerialize(const uint8_t** buffer, size_t* size,
|
||||
Endianness streamEndianness) override {
|
||||
ReturnValue_t result = SerialLinkedListAdapter::deSerialize(buffer,
|
||||
size, streamEndianness);
|
||||
if(oneCycleCount) {
|
||||
cycleCountY = cycleCountX;
|
||||
cycleCountZ = cycleCountX;
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
SerializeElement<uint16_t> cycleCountX;
|
||||
SerializeElement<uint16_t> cycleCountY;
|
||||
SerializeElement<uint16_t> cycleCountZ;
|
||||
|
||||
private:
|
||||
void setLinks(bool oneCycleCount) {
|
||||
setStart(&cycleCountX);
|
||||
if(not oneCycleCount) {
|
||||
cycleCountX.setNext(&cycleCountY);
|
||||
cycleCountY.setNext(&cycleCountZ);
|
||||
}
|
||||
}
|
||||
|
||||
bool oneCycleCount;
|
||||
};
|
||||
|
||||
static constexpr uint32_t MGM_DATASET_ID = READ_DATA;
|
||||
|
||||
enum MgmPoolIds: lp_id_t {
|
||||
FIELD_STRENGTH_X,
|
||||
FIELD_STRENGTH_Y,
|
||||
FIELD_STRENGTH_Z,
|
||||
};
|
||||
|
||||
class Rm3100PrimaryDataset: public StaticLocalDataSet<3> {
|
||||
public:
|
||||
Rm3100PrimaryDataset(HasLocalDataPoolIF* hkOwner):
|
||||
StaticLocalDataSet(hkOwner, MGM_DATASET_ID) {}
|
||||
|
||||
Rm3100PrimaryDataset(object_id_t mgmId):
|
||||
StaticLocalDataSet(sid_t(mgmId, MGM_DATASET_ID)) {}
|
||||
|
||||
// Field strengths in micro Tesla.
|
||||
lp_var_t<float> fieldStrengthX = lp_var_t<float>(sid.objectId,
|
||||
FIELD_STRENGTH_X, this);
|
||||
lp_var_t<float> fieldStrengthY = lp_var_t<float>(sid.objectId,
|
||||
FIELD_STRENGTH_Y, this);
|
||||
lp_var_t<float> fieldStrengthZ = lp_var_t<float>(sid.objectId,
|
||||
FIELD_STRENGTH_Z, this);
|
||||
};
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_MGMHANDLERRM3100DEFINITIONS_H_ */
|
||||
@ -20,7 +20,7 @@ LinuxLibgpioIF::~LinuxLibgpioIF() {
|
||||
ReturnValue_t LinuxLibgpioIF::addGpios(GpioCookie* gpioCookie) {
|
||||
ReturnValue_t result;
|
||||
if(gpioCookie == nullptr) {
|
||||
sif::error << "LinuxLibgpioIF::initialize: Invalid cookie" << std::endl;
|
||||
sif::error << "LinuxLibgpioIF::addGpios: Invalid cookie" << std::endl;
|
||||
return RETURN_FAILED;
|
||||
}
|
||||
|
||||
@ -45,16 +45,25 @@ ReturnValue_t LinuxLibgpioIF::addGpios(GpioCookie* gpioCookie) {
|
||||
|
||||
ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
|
||||
for(auto& gpioConfig: mapToAdd) {
|
||||
switch(gpioConfig.second->gpioType) {
|
||||
auto& gpioType = gpioConfig.second->gpioType;
|
||||
switch(gpioType) {
|
||||
case(gpio::GpioTypes::NONE): {
|
||||
return GPIO_INVALID_INSTANCE;
|
||||
}
|
||||
case(gpio::GpioTypes::GPIO_REGULAR): {
|
||||
GpiodRegular* regularGpio = dynamic_cast<GpiodRegular*>(gpioConfig.second);
|
||||
case(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP): {
|
||||
auto regularGpio = dynamic_cast<GpiodRegularByChip*>(gpioConfig.second);
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_INVALID_INSTANCE;
|
||||
}
|
||||
configureRegularGpio(gpioConfig.first, regularGpio);
|
||||
configureGpioByChip(gpioConfig.first, *regularGpio);
|
||||
break;
|
||||
}
|
||||
case(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL):{
|
||||
auto regularGpio = dynamic_cast<GpiodRegularByLabel*>(gpioConfig.second);
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_INVALID_INSTANCE;
|
||||
}
|
||||
configureGpioByLabel(gpioConfig.first, *regularGpio);
|
||||
break;
|
||||
}
|
||||
case(gpio::GpioTypes::CALLBACK): {
|
||||
@ -70,41 +79,59 @@ ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
ReturnValue_t LinuxLibgpioIF::configureRegularGpio(gpioId_t gpioId, GpiodRegular *regularGpio) {
|
||||
std::string chipname;
|
||||
ReturnValue_t LinuxLibgpioIF::configureGpioByLabel(gpioId_t gpioId,
|
||||
GpiodRegularByLabel &gpioByLabel) {
|
||||
std::string& label = gpioByLabel.label;
|
||||
struct gpiod_chip* chip = gpiod_chip_open_by_label(label.c_str());
|
||||
if (chip == nullptr) {
|
||||
sif::warning << "LinuxLibgpioIF::configureRegularGpio: Failed to open gpio from gpio "
|
||||
<< "group with label " << label << ". Gpio ID: " << gpioId << std::endl;
|
||||
return RETURN_FAILED;
|
||||
|
||||
}
|
||||
std::string failOutput = "label: " + label;
|
||||
return configureRegularGpio(gpioId, gpioByLabel.gpioType, chip, gpioByLabel, failOutput);
|
||||
}
|
||||
|
||||
ReturnValue_t LinuxLibgpioIF::configureGpioByChip(gpioId_t gpioId,
|
||||
GpiodRegularByChip &gpioByChip) {
|
||||
std::string& chipname = gpioByChip.chipname;
|
||||
struct gpiod_chip* chip = gpiod_chip_open_by_name(chipname.c_str());
|
||||
if (chip == nullptr) {
|
||||
sif::warning << "LinuxLibgpioIF::configureRegularGpio: Failed to open chip "
|
||||
<< chipname << ". Gpio ID: " << gpioId << std::endl;
|
||||
return RETURN_FAILED;
|
||||
}
|
||||
std::string failOutput = "chipname: " + chipname;
|
||||
return configureRegularGpio(gpioId, gpioByChip.gpioType, chip, gpioByChip, failOutput);
|
||||
}
|
||||
|
||||
ReturnValue_t LinuxLibgpioIF::configureRegularGpio(gpioId_t gpioId, gpio::GpioTypes gpioType,
|
||||
struct gpiod_chip* chip, GpiodRegularBase& regularGpio, std::string failOutput) {
|
||||
unsigned int lineNum;
|
||||
struct gpiod_chip *chip;
|
||||
gpio::Direction direction;
|
||||
std::string consumer;
|
||||
struct gpiod_line *lineHandle;
|
||||
int result = 0;
|
||||
|
||||
chipname = regularGpio->chipname;
|
||||
chip = gpiod_chip_open_by_name(chipname.c_str());
|
||||
if (!chip) {
|
||||
sif::warning << "LinuxLibgpioIF::configureRegularGpio: Failed to open chip "
|
||||
<< chipname << ". Gpio ID: " << gpioId << std::endl;
|
||||
return RETURN_FAILED;
|
||||
}
|
||||
|
||||
lineNum = regularGpio->lineNum;
|
||||
lineNum = regularGpio.lineNum;
|
||||
lineHandle = gpiod_chip_get_line(chip, lineNum);
|
||||
if (!lineHandle) {
|
||||
sif::debug << "LinuxLibgpioIF::configureRegularGpio: Failed to open line " << std::endl;
|
||||
sif::debug << "GPIO ID: " << gpioId << ", line number: " << lineNum <<
|
||||
", chipname: " << chipname << std::endl;
|
||||
sif::debug << "Check if linux GPIO configuration has changed. " << std::endl;
|
||||
sif::warning << "LinuxLibgpioIF::configureRegularGpio: Failed to open line " << std::endl;
|
||||
sif::warning << "GPIO ID: " << gpioId << ", line number: " << lineNum <<
|
||||
", " << failOutput << std::endl;
|
||||
sif::warning << "Check if Linux GPIO configuration has changed. " << std::endl;
|
||||
gpiod_chip_close(chip);
|
||||
return RETURN_FAILED;
|
||||
}
|
||||
|
||||
direction = regularGpio->direction;
|
||||
consumer = regularGpio->consumer;
|
||||
direction = regularGpio.direction;
|
||||
consumer = regularGpio.consumer;
|
||||
/* Configure direction and add a description to the GPIO */
|
||||
switch (direction) {
|
||||
case(gpio::OUT): {
|
||||
result = gpiod_line_request_output(lineHandle, consumer.c_str(),
|
||||
regularGpio->initValue);
|
||||
regularGpio.initValue);
|
||||
if (result < 0) {
|
||||
sif::error << "LinuxLibgpioIF::configureRegularGpio: Failed to request line " << lineNum <<
|
||||
" from GPIO instance with ID: " << gpioId << std::endl;
|
||||
@ -134,7 +161,7 @@ ReturnValue_t LinuxLibgpioIF::configureRegularGpio(gpioId_t gpioId, GpiodRegular
|
||||
* Write line handle to GPIO configuration instance so it can later be used to set or
|
||||
* read states of GPIOs.
|
||||
*/
|
||||
regularGpio->lineHandle = lineHandle;
|
||||
regularGpio.lineHandle = lineHandle;
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
@ -145,8 +172,14 @@ ReturnValue_t LinuxLibgpioIF::pullHigh(gpioId_t gpioId) {
|
||||
return UNKNOWN_GPIO_ID;
|
||||
}
|
||||
|
||||
if(gpioMapIter->second->gpioType == gpio::GpioTypes::GPIO_REGULAR) {
|
||||
return driveGpio(gpioId, dynamic_cast<GpiodRegular*>(gpioMapIter->second), 1);
|
||||
auto gpioType = gpioMapIter->second->gpioType;
|
||||
if(gpioType == gpio::GpioTypes::GPIO_REGULAR_BY_CHIP or
|
||||
gpioType == gpio::GpioTypes::GPIO_REGULAR_BY_LABEL) {
|
||||
auto regularGpio = dynamic_cast<GpiodRegularBase*>(gpioMapIter->second);
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_TYPE_FAILURE;
|
||||
}
|
||||
return driveGpio(gpioId, *regularGpio, gpio::HIGH);
|
||||
}
|
||||
else {
|
||||
auto gpioCallback = dynamic_cast<GpioCallback*>(gpioMapIter->second);
|
||||
@ -167,8 +200,14 @@ ReturnValue_t LinuxLibgpioIF::pullLow(gpioId_t gpioId) {
|
||||
return UNKNOWN_GPIO_ID;
|
||||
}
|
||||
|
||||
if(gpioMapIter->second->gpioType == gpio::GpioTypes::GPIO_REGULAR) {
|
||||
return driveGpio(gpioId, dynamic_cast<GpiodRegular*>(gpioMapIter->second), 0);
|
||||
auto& gpioType = gpioMapIter->second->gpioType;
|
||||
if(gpioType == gpio::GpioTypes::GPIO_REGULAR_BY_CHIP or
|
||||
gpioType == gpio::GpioTypes::GPIO_REGULAR_BY_LABEL) {
|
||||
auto regularGpio = dynamic_cast<GpiodRegularBase*>(gpioMapIter->second);
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_TYPE_FAILURE;
|
||||
}
|
||||
return driveGpio(gpioId, *regularGpio, gpio::LOW);
|
||||
}
|
||||
else {
|
||||
auto gpioCallback = dynamic_cast<GpioCallback*>(gpioMapIter->second);
|
||||
@ -183,12 +222,8 @@ ReturnValue_t LinuxLibgpioIF::pullLow(gpioId_t gpioId) {
|
||||
}
|
||||
|
||||
ReturnValue_t LinuxLibgpioIF::driveGpio(gpioId_t gpioId,
|
||||
GpiodRegular* regularGpio, unsigned int logicLevel) {
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_TYPE_FAILURE;
|
||||
}
|
||||
|
||||
int result = gpiod_line_set_value(regularGpio->lineHandle, logicLevel);
|
||||
GpiodRegularBase& regularGpio, gpio::Levels logicLevel) {
|
||||
int result = gpiod_line_set_value(regularGpio.lineHandle, logicLevel);
|
||||
if (result < 0) {
|
||||
sif::warning << "LinuxLibgpioIF::driveGpio: Failed to pull GPIO with ID " << gpioId <<
|
||||
" to logic level " << logicLevel << std::endl;
|
||||
@ -204,9 +239,10 @@ ReturnValue_t LinuxLibgpioIF::readGpio(gpioId_t gpioId, int* gpioState) {
|
||||
sif::warning << "LinuxLibgpioIF::readGpio: Unknown GPIOD ID " << gpioId << std::endl;
|
||||
return UNKNOWN_GPIO_ID;
|
||||
}
|
||||
|
||||
if(gpioMapIter->second->gpioType == gpio::GpioTypes::GPIO_REGULAR) {
|
||||
GpiodRegular* regularGpio = dynamic_cast<GpiodRegular*>(gpioMapIter->second);
|
||||
auto gpioType = gpioMapIter->second->gpioType;
|
||||
if(gpioType == gpio::GpioTypes::GPIO_REGULAR_BY_CHIP or
|
||||
gpioType == gpio::GpioTypes::GPIO_REGULAR_BY_LABEL) {
|
||||
auto regularGpio = dynamic_cast<GpiodRegularBase*>(gpioMapIter->second);
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_TYPE_FAILURE;
|
||||
}
|
||||
@ -225,13 +261,14 @@ ReturnValue_t LinuxLibgpioIF::checkForConflicts(GpioMap& mapToAdd){
|
||||
ReturnValue_t result = HasReturnvaluesIF::RETURN_OK;
|
||||
for(auto& gpioConfig: mapToAdd) {
|
||||
switch(gpioConfig.second->gpioType) {
|
||||
case(gpio::GpioTypes::GPIO_REGULAR): {
|
||||
auto regularGpio = dynamic_cast<GpiodRegular*>(gpioConfig.second);
|
||||
case(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP):
|
||||
case(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL): {
|
||||
auto regularGpio = dynamic_cast<GpiodRegularBase*>(gpioConfig.second);
|
||||
if(regularGpio == nullptr) {
|
||||
return GPIO_TYPE_FAILURE;
|
||||
}
|
||||
/* Check for conflicts and remove duplicates if necessary */
|
||||
result = checkForConflictsRegularGpio(gpioConfig.first, regularGpio, mapToAdd);
|
||||
result = checkForConflictsRegularGpio(gpioConfig.first, *regularGpio, mapToAdd);
|
||||
if(result != HasReturnvaluesIF::RETURN_OK) {
|
||||
status = result;
|
||||
}
|
||||
@ -259,17 +296,19 @@ ReturnValue_t LinuxLibgpioIF::checkForConflicts(GpioMap& mapToAdd){
|
||||
|
||||
|
||||
ReturnValue_t LinuxLibgpioIF::checkForConflictsRegularGpio(gpioId_t gpioIdToCheck,
|
||||
GpiodRegular* gpioToCheck, GpioMap& mapToAdd) {
|
||||
GpiodRegularBase& gpioToCheck, GpioMap& mapToAdd) {
|
||||
/* Cross check with private map */
|
||||
gpioMapIter = gpioMap.find(gpioIdToCheck);
|
||||
if(gpioMapIter != gpioMap.end()) {
|
||||
if(gpioMapIter->second->gpioType != gpio::GpioTypes::GPIO_REGULAR) {
|
||||
auto& gpioType = gpioMapIter->second->gpioType;
|
||||
if(gpioType != gpio::GpioTypes::GPIO_REGULAR_BY_CHIP and
|
||||
gpioType != gpio::GpioTypes::GPIO_REGULAR_BY_LABEL) {
|
||||
sif::warning << "LinuxLibgpioIF::checkForConflicts: ID already exists for different "
|
||||
"GPIO type" << gpioIdToCheck << ". Removing duplicate." << std::endl;
|
||||
mapToAdd.erase(gpioIdToCheck);
|
||||
return HasReturnvaluesIF::RETURN_OK;
|
||||
}
|
||||
auto ownRegularGpio = dynamic_cast<GpiodRegular*>(gpioMapIter->second);
|
||||
auto ownRegularGpio = dynamic_cast<GpiodRegularBase*>(gpioMapIter->second);
|
||||
if(ownRegularGpio == nullptr) {
|
||||
return GPIO_TYPE_FAILURE;
|
||||
}
|
||||
|
||||
@ -6,6 +6,7 @@
|
||||
#include <fsfw/objectmanager/SystemObject.h>
|
||||
|
||||
class GpioCookie;
|
||||
class GpiodRegularIF;
|
||||
|
||||
/**
|
||||
* @brief This class implements the GpioIF for a linux based system. The
|
||||
@ -47,9 +48,13 @@ private:
|
||||
* @param gpioId The GPIO ID of the GPIO to drive.
|
||||
* @param logiclevel The logic level to set. O or 1.
|
||||
*/
|
||||
ReturnValue_t driveGpio(gpioId_t gpioId, GpiodRegular* regularGpio, unsigned int logiclevel);
|
||||
ReturnValue_t driveGpio(gpioId_t gpioId, GpiodRegularBase& regularGpio,
|
||||
gpio::Levels logicLevel);
|
||||
|
||||
ReturnValue_t configureRegularGpio(gpioId_t gpioId, GpiodRegular* regularGpio);
|
||||
ReturnValue_t configureGpioByLabel(gpioId_t gpioId, GpiodRegularByLabel& gpioByLabel);
|
||||
ReturnValue_t configureGpioByChip(gpioId_t gpioId, GpiodRegularByChip& gpioByChip);
|
||||
ReturnValue_t configureRegularGpio(gpioId_t gpioId, gpio::GpioTypes gpioType,
|
||||
struct gpiod_chip* chip, GpiodRegularBase& regularGpio, std::string failOutput);
|
||||
|
||||
/**
|
||||
* @brief This function checks if GPIOs are already registered and whether
|
||||
@ -62,7 +67,7 @@ private:
|
||||
*/
|
||||
ReturnValue_t checkForConflicts(GpioMap& mapToAdd);
|
||||
|
||||
ReturnValue_t checkForConflictsRegularGpio(gpioId_t gpiodId, GpiodRegular* regularGpio,
|
||||
ReturnValue_t checkForConflictsRegularGpio(gpioId_t gpiodId, GpiodRegularBase& regularGpio,
|
||||
GpioMap& mapToAdd);
|
||||
ReturnValue_t checkForConflictsCallbackGpio(gpioId_t gpiodId, GpioCallback* regularGpio,
|
||||
GpioMap& mapToAdd);
|
||||
|
||||
@ -12,7 +12,7 @@ ReturnValue_t gpio::createRpiGpioConfig(GpioCookie* cookie, gpioId_t gpioId, int
|
||||
return HasReturnvaluesIF::RETURN_FAILED;
|
||||
}
|
||||
|
||||
GpiodRegular* config = new GpiodRegular();
|
||||
auto config = new GpiodRegularByChip();
|
||||
/* Default chipname for Raspberry Pi. There is still gpiochip1 for expansion, but most users
|
||||
will not need this */
|
||||
config->chipname = "gpiochip0";
|
||||
|
||||
@ -141,8 +141,8 @@ ReturnValue_t SpiComIF::sendMessage(CookieIF *cookie, const uint8_t *sendData, s
|
||||
if(sendLen > spiCookie->getMaxBufferSize()) {
|
||||
#if FSFW_VERBOSE_LEVEL >= 1
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::warning << "SpiComIF::sendMessage: Too much data sent, send length" << sendLen <<
|
||||
"larger than maximum buffer length" << spiCookie->getMaxBufferSize() << std::endl;
|
||||
sif::warning << "SpiComIF::sendMessage: Too much data sent, send length " << sendLen <<
|
||||
"larger than maximum buffer length " << spiCookie->getMaxBufferSize() << std::endl;
|
||||
#else
|
||||
sif::printWarning("SpiComIF::sendMessage: Too much data sent, send length %lu larger "
|
||||
"than maximum buffer length %lu!\n", static_cast<unsigned long>(sendLen),
|
||||
@ -197,12 +197,26 @@ ReturnValue_t SpiComIF::performRegularSendOperation(SpiCookie *spiCookie, const
|
||||
if(gpioId != gpio::NO_GPIO) {
|
||||
result = spiMutex->lockMutex(timeoutType, timeoutMs);
|
||||
if (result != RETURN_OK) {
|
||||
#if FSFW_VERBOSE_LEVEL >= 1
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::error << "SpiComIF::sendMessage: Failed to lock mutex" << std::endl;
|
||||
#else
|
||||
sif::printError("SpiComIF::sendMessage: Failed to lock mutex\n");
|
||||
#endif
|
||||
#endif
|
||||
return result;
|
||||
}
|
||||
ReturnValue_t result = gpioComIF->pullLow(gpioId);
|
||||
if(result != HasReturnvaluesIF::RETURN_OK) {
|
||||
#if FSFW_VERBOSE_LEVEL >= 1
|
||||
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
||||
sif::warning << "SpiComIF::sendMessage: Pulling low CS pin failed" << std::endl;
|
||||
#else
|
||||
sif::printWarning("SpiComIF::sendMessage: Pulling low CS pin failed");
|
||||
#endif
|
||||
#endif
|
||||
return result;
|
||||
}
|
||||
gpioComIF->pullLow(gpioId);
|
||||
}
|
||||
|
||||
/* Execute transfer */
|
||||
@ -213,7 +227,7 @@ ReturnValue_t SpiComIF::performRegularSendOperation(SpiCookie *spiCookie, const
|
||||
utility::handleIoctlError("SpiComIF::sendMessage: ioctl error.");
|
||||
result = FULL_DUPLEX_TRANSFER_FAILED;
|
||||
}
|
||||
#if FSFW_HAL_LINUX_SPI_WIRETAPPING == 1
|
||||
#if FSFW_HAL_SPI_WIRETAPPING == 1
|
||||
performSpiWiretapping(spiCookie);
|
||||
#endif /* FSFW_LINUX_SPI_WIRETAPPING == 1 */
|
||||
}
|
||||
@ -384,11 +398,11 @@ GpioIF* SpiComIF::getGpioInterface() {
|
||||
void SpiComIF::setSpiSpeedAndMode(int spiFd, spi::SpiModes mode, uint32_t speed) {
|
||||
int retval = ioctl(spiFd, SPI_IOC_WR_MODE, reinterpret_cast<uint8_t*>(&mode));
|
||||
if(retval != 0) {
|
||||
utility::handleIoctlError("SpiTestClass::performRm3100Test: Setting SPI mode failed!");
|
||||
utility::handleIoctlError("SpiComIF::setSpiSpeedAndMode: Setting SPI mode failed");
|
||||
}
|
||||
|
||||
retval = ioctl(spiFd, SPI_IOC_WR_MAX_SPEED_HZ, &speed);
|
||||
if(retval != 0) {
|
||||
utility::handleIoctlError("SpiTestClass::performRm3100Test: Setting SPI speed failed!");
|
||||
utility::handleIoctlError("SpiComIF::setSpiSpeedAndMode: Setting SPI speed failed");
|
||||
}
|
||||
}
|
||||
|
||||
@ -29,6 +29,8 @@ enum: uint8_t {
|
||||
PUS_SERVICE_9 = 89,
|
||||
PUS_SERVICE_17 = 97,
|
||||
PUS_SERVICE_23 = 103,
|
||||
MGM_LIS3MDL = 106,
|
||||
MGM_RM3100 = 107,
|
||||
|
||||
FW_SUBSYSTEM_ID_RANGE
|
||||
};
|
||||
|
||||
@ -76,6 +76,8 @@ enum: uint8_t {
|
||||
HAL_UART, //HURT
|
||||
HAL_I2C, //HI2C
|
||||
HAL_GPIO, //HGIO
|
||||
MGM_LIS3MDL, //MGMLIS3
|
||||
MGM_RM3100, //MGMRM3100
|
||||
FW_CLASS_ID_COUNT // [EXPORT] : [END]
|
||||
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user