KSat/fsfw
15
4
Fork 0
forked from fsfw/fsfw
Code Issues Pull Requests 1 Releases Wiki Activity

Merge branch 'mueller_framework' into front_branch

Browse Source
This commit is contained in:
Robin Müller 2020-05-25 23:54:39 +02:00
commit 8ddccfe3bd
4 changed files with 89 additions and 68 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
devicehandlers/DeviceHandlerBase.h
View File

@ -509,26 +509,29 @@ protected:
*/
static const uint8_t INTERFACE_ID = CLASS_ID::DEVICE_HANDLER_BASE;
/**
* These returnvalues can be returned from abstract functions
/* These returnvalues can be returned from abstract functions
* to alter the behaviour of DHB.For error values, refer to
* DeviceHandlerIF.h returnvalues.
*/
static const ReturnValue_t INVALID_CHANNEL = MAKE_RETURN_CODE(4);
* DeviceHandlerIF.h returnvalues. */
// (Robin): maybe this would be better in DeviceHandlerIF?
static const ReturnValue_t INVALID_CHANNEL = MAKE_RETURN_CODE(0xA0);
// Returnvalues for scanForReply()
static const ReturnValue_t APERIODIC_REPLY = MAKE_RETURN_CODE(5); //!< This is used to specify for replies from a device which are not replies to requests
static const ReturnValue_t IGNORE_REPLY_DATA = MAKE_RETURN_CODE(6); //!< Ignore parts of the received packet
static const ReturnValue_t IGNORE_FULL_PACKET = MAKE_RETURN_CODE(7); //!< Ignore full received packet
static const ReturnValue_t APERIODIC_REPLY = MAKE_RETURN_CODE(0xB0); //!< This is used to specify for replies from a device which are not replies to requests
static const ReturnValue_t IGNORE_REPLY_DATA = MAKE_RETURN_CODE(0xB1); //!< Ignore parts of the received packet
static const ReturnValue_t IGNORE_FULL_PACKET = MAKE_RETURN_CODE(0xB2); //!< Ignore full received packet
// static const ReturnValue_t ONE_SWITCH = MAKE_RETURN_CODE(8);
// static const ReturnValue_t TWO_SWITCHES = MAKE_RETURN_CODE(9);
static const ReturnValue_t NO_SWITCH = MAKE_RETURN_CODE(10);
static const ReturnValue_t COMMAND_MAP_ERROR = MAKE_RETURN_CODE(11);
static const ReturnValue_t NOTHING_TO_SEND = MAKE_RETURN_CODE(12);
// Returnvalues for command building
static const ReturnValue_t NOTHING_TO_SEND = MAKE_RETURN_CODE(0xC0); //!< Return this if no command sending in required
// (Robin): Maybe this would be better in DeviceHandlerIF?
static const ReturnValue_t COMMAND_MAP_ERROR = MAKE_RETURN_CODE(0xC2);
// Returnvalues for getSwitches()
static const ReturnValue_t NO_SWITCH = MAKE_RETURN_CODE(0xD0);
// (Robin): Maybe this would be better in DeviceHandlerIF?
// Mode handling error Codes
static const ReturnValue_t CHILD_TIMEOUT = MAKE_RETURN_CODE(0xE1);
static const ReturnValue_t SWITCH_FAILED = MAKE_RETURN_CODE(0xE2);
static const ReturnValue_t CHILD_TIMEOUT = MAKE_RETURN_CODE(0xE0);
static const ReturnValue_t SWITCH_FAILED = MAKE_RETURN_CODE(0xE1);
static const DeviceCommandId_t RAW_COMMAND_ID = -1;
static const DeviceCommandId_t NO_COMMAND_ID = -2;

119
devicehandlers/DeviceHandlerIF.h
View File

@ -28,19 +28,57 @@ public:
// MODE_ON = 0, //!< The device is powered and ready to perform operations. In this mode, no commands are sent by the device handler itself, but direct commands van be commanded and will be interpreted
// MODE_OFF = 1, //!< The device is powered off. The only command accepted in this mode is a mode change to on.
static const Mode_t MODE_NORMAL = 2; //!< The device is powered on and the device handler periodically sends commands. The commands to be sent are selected by the handler according to the submode.
static const Mode_t MODE_RAW = 3; //!< The device is powered on and ready to perform operations. In this mode, raw commands can be sent. The device handler will send all replies received from the command back to the commanding object.
static const Mode_t MODE_ERROR_ON = 4; //!4< The device is shut down but the switch could not be turned off, so the device still is powered. In this mode, only a mode change to @c MODE_OFF can be commanded, which tries to switch off the device again.
static const Mode_t _MODE_START_UP = TRANSITION_MODE_CHILD_ACTION_MASK | 5; //!< This is a transitional state which can not be commanded. The device handler performs all commands to get the device in a state ready to perform commands. When this is completed, the mode changes to @c MODE_ON.
static const Mode_t _MODE_SHUT_DOWN = TRANSITION_MODE_CHILD_ACTION_MASK | 6; //!< This is a transitional state which can not be commanded. The device handler performs all actions and commands to get the device shut down. When the device is off, the mode changes to @c MODE_OFF.
static const Mode_t _MODE_TO_ON = TRANSITION_MODE_CHILD_ACTION_MASK | HasModesIF::MODE_ON; //!< It is possible to set the mode to _MODE_TO_ON to use the to on transition if available.
//! The device is powered on and the device handler periodically sends
//! commands. The commands to be sent are selected by the handler
//! according to the submode.
static const Mode_t MODE_NORMAL = 2;
//! The device is powered on and ready to perform operations. In this mode,
//! raw commands can be sent. The device handler will send all replies
//! received from the command back to the commanding object.
static const Mode_t MODE_RAW = 3;
//! The device is shut down but the switch could not be turned off, so the
//! device still is powered. In this mode, only a mode change to @c MODE_OFF
//! can be commanded, which tries to switch off the device again.
static const Mode_t MODE_ERROR_ON = 4;
//! This is a transitional state which can not be commanded. The device
//! handler performs all commands to get the device in a state ready to
//! perform commands. When this is completed, the mode changes to @c MODE_ON.
static const Mode_t _MODE_START_UP = TRANSITION_MODE_CHILD_ACTION_MASK | 5;
//! This is a transitional state which can not be commanded.
//! The device handler performs all actions and commands to get the device
//! shut down. When the device is off, the mode changes to @c MODE_OFF.
static const Mode_t _MODE_SHUT_DOWN = TRANSITION_MODE_CHILD_ACTION_MASK | 6;
//! It is possible to set the mode to _MODE_TO_ON to use the to on
//! transition if available.
static const Mode_t _MODE_TO_ON = TRANSITION_MODE_CHILD_ACTION_MASK | HasModesIF::MODE_ON;
//! It is possible to set the mode to _MODE_TO_RAW to use the to raw
//! transition if available.
static const Mode_t _MODE_TO_RAW = TRANSITION_MODE_CHILD_ACTION_MASK | MODE_RAW;
//! It is possible to set the mode to _MODE_TO_NORMAL to use the to normal
//! transition if available.
static const Mode_t _MODE_TO_NORMAL = TRANSITION_MODE_CHILD_ACTION_MASK | MODE_NORMAL;
static const Mode_t _MODE_POWER_DOWN = TRANSITION_MODE_BASE_ACTION_MASK | 1; //!< This is a transitional state which can not be commanded. The device is shut down and ready to be switched off. After the command to set the switch off has been sent, the mode changes to @c MODE_WAIT_OFF
static const Mode_t _MODE_POWER_ON = TRANSITION_MODE_BASE_ACTION_MASK | 2; //!< This is a transitional state which can not be commanded. The device will be switched on in this state. After the command to set the switch on has been sent, the mode changes to @c MODE_WAIT_ON
static const Mode_t _MODE_WAIT_OFF = TRANSITION_MODE_BASE_ACTION_MASK | 3; //!< This is a transitional state which can not be commanded. The switch has been commanded off and the handler waits for it to be off. When the switch is off, the mode changes to @c MODE_OFF.
static const Mode_t _MODE_WAIT_ON = TRANSITION_MODE_BASE_ACTION_MASK | 4; //!< This is a transitional state which can not be commanded. The switch has been commanded on and the handler waits for it to be on. When the switch is on, the mode changes to @c MODE_TO_ON.
static const Mode_t _MODE_SWITCH_IS_OFF = TRANSITION_MODE_BASE_ACTION_MASK | 5; //!< This is a transitional state which can not be commanded. The switch has been commanded off and is off now. This state is only to do an RMAP cycle once more where the doSendRead() function will set the mode to MODE_OFF. The reason to do this is to get rid of stuck packets in the IO Board
//! This is a transitional state which can not be commanded.
//! The device is shut down and ready to be switched off.
//! After the command to set the switch off has been sent,
//! the mode changes to @c MODE_WAIT_OFF
static const Mode_t _MODE_POWER_DOWN = TRANSITION_MODE_BASE_ACTION_MASK | 1;
//! This is a transitional state which can not be commanded. The device
//! will be switched on in this state. After the command to set the switch
//! on has been sent, the mode changes to @c MODE_WAIT_ON.
static const Mode_t _MODE_POWER_ON = TRANSITION_MODE_BASE_ACTION_MASK | 2;
//! This is a transitional state which can not be commanded. The switch has
//! been commanded off and the handler waits for it to be off.
//! When the switch is off, the mode changes to @c MODE_OFF.
static const Mode_t _MODE_WAIT_OFF = TRANSITION_MODE_BASE_ACTION_MASK | 3;
//! This is a transitional state which can not be commanded. The switch
//! has been commanded on and the handler waits for it to be on.
//! When the switch is on, the mode changes to @c MODE_TO_ON.
static const Mode_t _MODE_WAIT_ON = TRANSITION_MODE_BASE_ACTION_MASK | 4;
//! This is a transitional state which can not be commanded. The switch has
//! been commanded off and is off now. This state is only to do an RMAP
//! cycle once more where the doSendRead() function will set the mode to
//! MODE_OFF. The reason to do this is to get rid of stuck packets in the IO Board.
static const Mode_t _MODE_SWITCH_IS_OFF = TRANSITION_MODE_BASE_ACTION_MASK | 5;
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::CDH;
static const Event DEVICE_BUILDING_COMMAND_FAILED = MAKE_EVENT(0, SEVERITY::LOW);
@ -58,47 +96,34 @@ public:
static const uint8_t INTERFACE_ID = CLASS_ID::DEVICE_HANDLER_IF;
// Standard codes used when building commands.
static const ReturnValue_t NOTHING_TO_SEND = MAKE_RETURN_CODE(0xA0); //!< Return this if no command sending in required
// Mostly used for internal handling.
static const ReturnValue_t NO_COMMAND_DATA = MAKE_RETURN_CODE(0xA2); //!< If the command size is 0. Checked in DHB
static const ReturnValue_t NO_REPLY_EXPECTED = MAKE_RETURN_CODE(0xA3); //!< Used to indicate that this is a command-only command.
static const ReturnValue_t COMMAND_NOT_SUPPORTED = MAKE_RETURN_CODE(0xA4); //!< Command ID not in commandMap. Checked in DHB
static const ReturnValue_t COMMAND_ALREADY_SENT = MAKE_RETURN_CODE(0xA5); //!< Command was already executed. Checked in DHB
static const ReturnValue_t COMMAND_WAS_NOT_SENT = MAKE_RETURN_CODE(0xA6);
static const ReturnValue_t CANT_SWITCH_ADDRESS = MAKE_RETURN_CODE(0xA7);
static const ReturnValue_t WRONG_MODE_FOR_COMMAND = MAKE_RETURN_CODE(0xA8);
static const ReturnValue_t TIMEOUT = MAKE_RETURN_CODE(0xA9);
static const ReturnValue_t BUSY = MAKE_RETURN_CODE(0xAA);
static const ReturnValue_t NON_OP_TEMPERATURE = MAKE_RETURN_CODE(0xAB);
static const ReturnValue_t COMMAND_NOT_IMPLEMENTED = MAKE_RETURN_CODE(0xAC);
static const ReturnValue_t NO_COMMAND_DATA = MAKE_RETURN_CODE(0xA0); //!< If the command size is 0. Checked in DHB
static const ReturnValue_t COMMAND_NOT_SUPPORTED = MAKE_RETURN_CODE(0xA1); //!< Command ID not in commandMap. Checked in DHB
static const ReturnValue_t COMMAND_ALREADY_SENT = MAKE_RETURN_CODE(0xA2); //!< Command was already executed. Checked in DHB
static const ReturnValue_t COMMAND_WAS_NOT_SENT = MAKE_RETURN_CODE(0xA3);
static const ReturnValue_t CANT_SWITCH_ADDRESS = MAKE_RETURN_CODE(0xA4);
static const ReturnValue_t WRONG_MODE_FOR_COMMAND = MAKE_RETURN_CODE(0xA5);
static const ReturnValue_t TIMEOUT = MAKE_RETURN_CODE(0xA6);
static const ReturnValue_t BUSY = MAKE_RETURN_CODE(0xA7);
static const ReturnValue_t NO_REPLY_EXPECTED = MAKE_RETURN_CODE(0xA8); //!< Used to indicate that this is a command-only command.
static const ReturnValue_t NON_OP_TEMPERATURE = MAKE_RETURN_CODE(0xA9);
static const ReturnValue_t COMMAND_NOT_IMPLEMENTED = MAKE_RETURN_CODE(0xAA);
// Standard codes used in scanForReply
static const ReturnValue_t APERIODIC_REPLY = MAKE_RETURN_CODE(0xB1); //!< This is used to specify for replies from a device which are not replies to requests
static const ReturnValue_t LENGTH_MISSMATCH = MAKE_RETURN_CODE(0xB2);
static const ReturnValue_t IGNORE_REPLY_DATA = MAKE_RETURN_CODE(0xB3); //!< Ignore parts of the received packet
static const ReturnValue_t IGNORE_FULL_PACKET = MAKE_RETURN_CODE(0xB4); //!< Ignore full received packet
static const ReturnValue_t CHECKSUM_ERROR = MAKE_RETURN_CODE(0xB5);
static const ReturnValue_t INVALID_DATA = MAKE_RETURN_CODE(0xB6);
static const ReturnValue_t PROTOCOL_ERROR = MAKE_RETURN_CODE(0xB7);
static const ReturnValue_t CHECKSUM_ERROR = MAKE_RETURN_CODE(0xB0);
static const ReturnValue_t LENGTH_MISSMATCH = MAKE_RETURN_CODE(0xB1);
static const ReturnValue_t INVALID_DATA = MAKE_RETURN_CODE(0xB2);
static const ReturnValue_t PROTOCOL_ERROR = MAKE_RETURN_CODE(0xB3);
// Standard codes used in interpretDeviceReply
static const ReturnValue_t DEVICE_DID_NOT_EXECUTE = MAKE_RETURN_CODE(0xC1); //the device reported, that it did not execute the command
static const ReturnValue_t DEVICE_REPORTED_ERROR = MAKE_RETURN_CODE(0xC2);
static const ReturnValue_t UNKNOW_DEVICE_REPLY = MAKE_RETURN_CODE(0xC3); //the deviceCommandId reported by scanforReply is unknown
static const ReturnValue_t DEVICE_REPLY_INVALID = MAKE_RETURN_CODE(0xC4); //syntax etc is correct but still not ok, eg parameters where none are expected
static const ReturnValue_t DEVICE_DID_NOT_EXECUTE = MAKE_RETURN_CODE(0xC0); //the device reported, that it did not execute the command
static const ReturnValue_t DEVICE_REPORTED_ERROR = MAKE_RETURN_CODE(0xC1);
static const ReturnValue_t UNKNOW_DEVICE_REPLY = MAKE_RETURN_CODE(0xC2); //the deviceCommandId reported by scanforReply is unknown
static const ReturnValue_t DEVICE_REPLY_INVALID = MAKE_RETURN_CODE(0xC3); //syntax etc is correct but still not ok, eg parameters where none are expected
// Standard codes used in buildCommandFromCommand
static const ReturnValue_t INVALID_COMMAND_PARAMETER = MAKE_RETURN_CODE(0xD0);
static const ReturnValue_t INVALID_NUMBER_OR_LENGTH_OF_PARAMETERS = MAKE_RETURN_CODE(0xD1);
// Standard codes used in getSwitches
static const ReturnValue_t NO_SWITCH = MAKE_RETURN_CODE(0xE1); //!< Return in getSwitches() to specify there are no switches
// static const ReturnValue_t ONE_SWITCH = MAKE_RETURN_CODE(8);
// static const ReturnValue_t TWO_SWITCHES = MAKE_RETURN_CODE(9);
// where is this used?
// static const ReturnValue_t COMMAND_MAP_ERROR = MAKE_RETURN_CODE(11);
/**
* Communication action that will be executed.
*
@ -115,16 +140,10 @@ public:
/**
* Default Destructor
*/
virtual ~DeviceHandlerIF() {
}
virtual ~DeviceHandlerIF() {}
/**
* This MessageQueue is used to command the device handler.
*
* To command a device handler, a DeviceHandlerCommandMessage can be sent to this Queue.
* The handler replies with a DeviceHandlerCommandMessage containing the DeviceHandlerCommand_t reply.
*
* @return the id of the MessageQueue
*/
virtual MessageQueueId_t getCommandQueue() const = 0;

2
modes/ModeMessage.h
View File

@ -23,8 +23,6 @@ public:
static const Command_t REPLY_MODE_REPLY = MAKE_COMMAND_ID(0x02);//!> Reply to a CMD_MODE_COMMAND or CMD_MODE_READ
static const Command_t REPLY_MODE_INFO = MAKE_COMMAND_ID(0x03); //!> Unrequested info about the current mode (used for composites to inform their container of a changed mode)
static const Command_t REPLY_CANT_REACH_MODE = MAKE_COMMAND_ID(0x04); //!> Reply in case a mode command can't be executed. Par1: returnCode, Par2: 0
//SHOULDDO is there a way we can transmit a returnvalue when responding that the mode is wrong, so we can give a nice failure code when commanded by PUS?
// shouldn't that possible with parameter 2 when submode only takes 1 byte?
static const Command_t REPLY_WRONG_MODE_REPLY = MAKE_COMMAND_ID(0x05);//!> Reply to a CMD_MODE_COMMAND, indicating that a mode was commanded and a transition started but was aborted; the parameters contain the mode that was reached
static const Command_t CMD_MODE_READ = MAKE_COMMAND_ID(0x06);//!> Command to read the current mode and reply with a REPLY_MODE_REPLY
static const Command_t CMD_MODE_ANNOUNCE = MAKE_COMMAND_ID(0x07);//!> Command to trigger an ModeInfo Event. This command does NOT have a reply.

1
storagemanager/StorageManagerIF.h
View File

@ -11,6 +11,7 @@
using AccessorPair = std::pair<ReturnValue_t, StorageAccessor>;
using ConstAccessorPair = std::pair<ReturnValue_t, ConstStorageAccessor>;
/**
* @brief This class provides an interface for intermediate data storage.
* @details The Storage manager classes shall be used to store larger chunks of