diff --git a/devicehandlers/DeviceHandlerBase.h b/devicehandlers/DeviceHandlerBase.h index 2e125e84..f31e1b7b 100644 --- a/devicehandlers/DeviceHandlerBase.h +++ b/devicehandlers/DeviceHandlerBase.h @@ -268,51 +268,6 @@ protected: virtual ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand, const uint8_t * commandData, size_t commandDataLen) = 0; - /** - * @brief fill the #deviceCommandMap - * called by the initialize() of the base class - * @details - * This is used to let the base class know which replies are expected. - * There are different scenarios regarding this: - * - * - "Normal" commands. These are commands, that trigger a direct reply - * from the device. In this case, the id of the command should be added - * to the command map with a commandData_t where maxDelayCycles is set - * to the maximum expected number of PST cycles the reply will take. - * Then, scanForReply returns the id of the command and the base class - * can handle time-out and missing replies. - * - * - Periodic, unrequested replies. These are replies that, once enabled, - * are sent by the device on its own in a defined interval. - * In this case, the id of the reply or a placeholder id should be added - * to the deviceCommandMap with a commandData_t where maxDelayCycles is - * set to the maximum expected number of PST cycles between two replies - * (also a tolerance should be added, as an FDIR message will be - * generated if it is missed). - * - * (Robin) This part confuses me. "must do as soon as" implies that - * the developer must do something somewhere else in the code. Is - * that really the case? If I understood correctly, DHB performs - * almost everything (e.g. in erirm function) as long as the commands - * are inserted correctly. - * - * As soon as the replies are enabled, DeviceCommandInfo.periodic must - * be set to true, DeviceCommandInfo.delayCycles to - * DeviceCommandInfo.maxDelayCycles. - * From then on, the base class handles the reception. - * Then, scanForReply returns the id of the reply or the placeholder id - * and the base class will take care of checking that all replies are - * received and the interval is correct. - * When the replies are disabled, DeviceCommandInfo.periodic must be set - * to 0, DeviceCommandInfo.delayCycles to 0; - * - * - Aperiodic, unrequested replies. These are replies that are sent - * by the device without any preceding command and not in a defined - * interval. These are not entered in the deviceCommandMap but - * handled by returning @c APERIODIC_REPLY in scanForReply(). - */ - virtual void fillCommandAndReplyMap() = 0; - /** * @brief Scans a buffer for a valid reply. * @details @@ -370,14 +325,114 @@ protected: virtual ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) = 0; + /** + * @brief fill the #deviceCommandMap + * called by the initialize() of the base class + * @details + * This is used to let the base class know which replies are expected. + * There are different scenarios regarding this: + * + * - "Normal" commands. These are commands, that trigger a direct reply + * from the device. In this case, the id of the command should be added + * to the command map with a commandData_t where maxDelayCycles is set + * to the maximum expected number of PST cycles the reply will take. + * Then, scanForReply returns the id of the command and the base class + * can handle time-out and missing replies. + * + * - Periodic, unrequested replies. These are replies that, once enabled, + * are sent by the device on its own in a defined interval. + * In this case, the id of the reply or a placeholder id should be added + * to the deviceCommandMap with a commandData_t where maxDelayCycles is + * set to the maximum expected number of PST cycles between two replies + * (also a tolerance should be added, as an FDIR message will be + * generated if it is missed). + * + * (Robin) This part confuses me. "must do as soon as" implies that + * the developer must do something somewhere else in the code. Is + * that really the case? If I understood correctly, DHB performs + * almost everything (e.g. in erirm function) as long as the commands + * are inserted correctly. + * + * As soon as the replies are enabled, DeviceCommandInfo.periodic must + * be set to true, DeviceCommandInfo.delayCycles to + * DeviceCommandInfo.maxDelayCycles. + * From then on, the base class handles the reception. + * Then, scanForReply returns the id of the reply or the placeholder id + * and the base class will take care of checking that all replies are + * received and the interval is correct. + * When the replies are disabled, DeviceCommandInfo.periodic must be set + * to 0, DeviceCommandInfo.delayCycles to 0; + * + * - Aperiodic, unrequested replies. These are replies that are sent + * by the device without any preceding command and not in a defined + * interval. These are not entered in the deviceCommandMap but + * handled by returning @c APERIODIC_REPLY in scanForReply(). + */ + virtual void fillCommandAndReplyMap() = 0; + + /** + * This is a helper method to facilitate inserting entries in the command map. + * @param deviceCommand Identifier of the command to add. + * @param maxDelayCycles The maximum number of delay cycles the command + * waits until it times out. + * @param periodic Indicates if the command is periodic (i.e. it is sent + * by the device repeatedly without request) or not. Default is aperiodic (0) + * @return - @c RETURN_OK when the command was successfully inserted, + * - @c RETURN_FAILED else. + */ + ReturnValue_t insertInCommandAndReplyMap(DeviceCommandId_t deviceCommand, + uint16_t maxDelayCycles, size_t replyLen = 0, uint8_t periodic = 0, + bool hasDifferentReplyId = false, DeviceCommandId_t replyId = 0); + + /** + * @brief This is a helper method to insert replies in the reply map. + * @param deviceCommand Identifier of the reply to add. + * @param maxDelayCycles The maximum number of delay cycles the reply waits + * until it times out. + * @param periodic Indicates if the command is periodic (i.e. it is sent + * by the device repeatedly without request) or not. Default is aperiodic (0) + * @return - @c RETURN_OK when the command was successfully inserted, + * - @c RETURN_FAILED else. + */ + ReturnValue_t insertInReplyMap(DeviceCommandId_t deviceCommand, + uint16_t maxDelayCycles, size_t replyLen = 0, uint8_t periodic = 0); + + /** + * @brief A simple command to add a command to the commandList. + * @param deviceCommand The command to add + * @return - @c RETURN_OK when the command was successfully inserted, + * - @c RETURN_FAILED else. + */ + ReturnValue_t insertInCommandMap(DeviceCommandId_t deviceCommand); + /** + * @brief This is a helper method to facilitate updating entries + * in the reply map. + * @param deviceCommand Identifier of the reply to update. + * @param delayCycles The current number of delay cycles to wait. + * As stated in #fillCommandAndCookieMap, to disable periodic commands, + * this is set to zero. + * @param maxDelayCycles The maximum number of delay cycles the reply waits + * until it times out. By passing 0 the entry remains untouched. + * @param periodic Indicates if the command is periodic (i.e. it is sent + * by the device repeatedly without request) or not.Default is aperiodic (0). + * Warning: The setting always overrides the value that was entered in the map. + * @return - @c RETURN_OK when the command was successfully inserted, + * - @c RETURN_FAILED else. + */ + ReturnValue_t updateReplyMapEntry(DeviceCommandId_t deviceReply, + uint16_t delayCycles, uint16_t maxDelayCycles, + uint8_t periodic = 0); + /** * @brief Can be implemented by child handler to * perform debugging * @details Example: Calling this in performOperation * to track values like mode. - * @param positionTracker Provide the child handler a way to know where the debugInterface was called - * @param objectId Provide the child handler object Id to specify actions for spefic devices - * @param parameter Supply a parameter of interest + * @param positionTracker Provide the child handler a way to know + * where the debugInterface was called + * @param objectId Provide the child handler object Id to + * specify actions for spefic devices + * @param parameter Supply a parameter of interest * Please delete all debugInterface calls in DHB after debugging is finished ! */ virtual void debugInterface(uint8_t positionTracker = 0, @@ -391,7 +446,8 @@ protected: * MODE_ON -> [MODE_ON, MODE_NORMAL, MODE_RAW, _MODE_POWER_DOWN] * MODE_NORMAL -> [MODE_ON, MODE_NORMAL, MODE_RAW, _MODE_POWER_DOWN] * MODE_RAW -> [MODE_ON, MODE_NORMAL, MODE_RAW, _MODE_POWER_DOWN] - * _MODE_START_UP -> MODE_ON (do not include time to set the switches, the base class got you covered) + * _MODE_START_UP -> MODE_ON (do not include time to set the switches, + * the base class got you covered) * * The default implementation returns 0 ! * @param modeFrom @@ -413,7 +469,6 @@ protected: */ virtual ReturnValue_t getSwitches(const uint8_t **switches, uint8_t *numberOfSwitches); - public: /** * @param parentQueueId @@ -646,11 +701,6 @@ protected: void replyReturnvalueToCommand(ReturnValue_t status, uint32_t parameter = 0); - /** - * - - * @param parameter2 additional parameter - */ void replyToCommand(ReturnValue_t status, uint32_t parameter = 0); /** @@ -658,7 +708,8 @@ protected: * * Sets #timeoutStart with every call. * - * Sets #transitionTargetMode if necessary so transitional states can be entered from everywhere without breaking the state machine + * Sets #transitionTargetMode if necessary so transitional states can be + * entered from everywhere without breaking the state machine * (which relies on a correct #transitionTargetMode). * * The submode is left unchanged. @@ -745,45 +796,6 @@ protected: */ virtual ReturnValue_t buildChildRawCommand(); - /** - * This is a helper method to facilitate inserting entries in the command map. - * @param deviceCommand Identifier of the command to add. - * @param maxDelayCycles The maximum number of delay cycles the command waits until it times out. - * @param periodic Indicates if the command is periodic (i.e. it is sent by the device repeatedly without request) or not. - * Default is aperiodic (0) - * @return RETURN_OK when the command was successfully inserted, COMMAND_MAP_ERROR else. - */ - ReturnValue_t insertInCommandAndReplyMap(DeviceCommandId_t deviceCommand, - uint16_t maxDelayCycles, size_t replyLen = 0, uint8_t periodic = 0, - bool hasDifferentReplyId = false, DeviceCommandId_t replyId = 0); - /** - * This is a helper method to insert replies in the reply map. - * @param deviceCommand Identifier of the reply to add. - * @param maxDelayCycles The maximum number of delay cycles the reply waits until it times out. - * @param periodic Indicates if the command is periodic (i.e. it is sent by the device repeatedly without request) or not. - * Default is aperiodic (0) - * @return RETURN_OK when the command was successfully inserted, COMMAND_MAP_ERROR else. - */ - ReturnValue_t insertInReplyMap(DeviceCommandId_t deviceCommand, - uint16_t maxDelayCycles, size_t replyLen = 0, uint8_t periodic = 0); - /** - * A simple command to add a command to the commandList. - * @param deviceCommand The command to add - * @return RETURN_OK if the command was successfully inserted, RETURN_FAILED else. - */ - ReturnValue_t insertInCommandMap(DeviceCommandId_t deviceCommand); - /** - * This is a helper method to facilitate updating entries in the reply map. - * @param deviceCommand Identifier of the reply to update. - * @param delayCycles The current number of delay cycles to wait. As stated in #fillCommandAndCookieMap, to disable periodic commands, this is set to zero. - * @param maxDelayCycles The maximum number of delay cycles the reply waits until it times out. By passing 0 the entry remains untouched. - * @param periodic Indicates if the command is periodic (i.e. it is sent by the device repeatedly without request) or not. - * Default is aperiodic (0). Warning: The setting always overrides the value that was entered in the map. - * @return RETURN_OK when the reply was successfully updated, COMMAND_MAP_ERROR else. - */ - ReturnValue_t updateReplyMapEntry(DeviceCommandId_t deviceReply, - uint16_t delayCycles, uint16_t maxDelayCycles, - uint8_t periodic = 0); /** * Returns the delay cycle count of a reply. * A count != 0 indicates that the command is already executed.