fsfw/power/PowerSwitchIF.h
Ulrich Mohr 575f70ba03 updating code from Flying Laptop
This is the framework of Flying Laptop OBSW version A.13.0.
2018-07-12 16:29:32 +02:00

76 lines
2.4 KiB
C++

/**
* @file PowerSwitchIF.h
* @brief This file defines the PowerSwitchIF class.
* @date 20.03.2013
* @author baetz
*/
#ifndef POWERSWITCHIF_H_
#define POWERSWITCHIF_H_
#include <framework/events/Event.h>
#include <framework/returnvalues/HasReturnvaluesIF.h>
/**
* This interface defines a connection to a device that is capable of turning on and off
* switches of devices identified by a switch ID.
*/
class PowerSwitchIF : public HasReturnvaluesIF {
public:
/**
* Empty dtor.
*/
virtual ~PowerSwitchIF() {
}
/**
* The Returnvalues id of this class, required by HasReturnvaluesIF
*/
static const uint8_t INTERFACE_ID = CLASS_ID::POWER_SWITCH_IF;
static const ReturnValue_t SWITCH_ON = MAKE_RETURN_CODE(1);
static const ReturnValue_t SWITCH_OFF = MAKE_RETURN_CODE(0);
static const ReturnValue_t SWITCH_TIMEOUT = MAKE_RETURN_CODE(2);
static const ReturnValue_t FUSE_ON = MAKE_RETURN_CODE(3);
static const ReturnValue_t FUSE_OFF = MAKE_RETURN_CODE(4);
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PCDU_2;
static const Event SWITCH_WENT_OFF = MAKE_EVENT(0, SEVERITY::LOW); //!< Someone detected that a switch went off which shouldn't. Severity: Low, Parameter1: switchId1, Parameter2: switchId2
/**
* send a direct command to the Power Unit to enable/disable the specified switch.
*
* @param switchNr
* @param onOff on == @c SWITCH_ON; off != @c SWITCH_ON
*/
virtual void sendSwitchCommand(uint8_t switchNr, ReturnValue_t onOff) const = 0;
/**
* Sends a command to the Power Unit to enable a certain fuse.
*/
virtual void sendFuseOnCommand(uint8_t fuseNr) const = 0;
/**
* get the state of the Switches.
* @param switchNr
* @return
* - @c SWITCH_ON if the specified switch is on.
* - @c SWITCH_OFF if the specified switch is off.
* - @c RETURN_FAILED if an error occured
*/
virtual ReturnValue_t getSwitchState( uint8_t switchNr ) const = 0;
/**
* get state of a fuse.
* @param fuseNr
* @return
* - @c FUSE_ON if the specified fuse is on.
* - @c FUSE_OFF if the specified fuse is off.
* - @c RETURN_FAILED if an error occured
*/
virtual ReturnValue_t getFuseState( uint8_t fuseNr ) const = 0;
/**
* The maximum delay that it will take to change a switch
*
* This may take into account the time to send a command, wait for it to be executed and see the switch changed.
*/
virtual uint32_t getSwitchDelayMs(void) const = 0;
};
#endif /* POWERSWITCHIF_H_ */