diff --git a/README.md b/README.md index 7c221c1c..9a404f52 100644 --- a/README.md +++ b/README.md @@ -607,6 +607,9 @@ gpioget Example to get state: gpioget gpiochip7 14 +Both the MIOs and EMIOs can be accessed via the zynq_gpio instance which +comprises 118 pins (54 MIOs and 64 EMIOs). + ## Xilinx UARTLIE Get info about ttyUL* devices @@ -624,11 +627,11 @@ This shows the memory mapping of /dev/i2c-0 ## CAN - ```sh - ip link set can0 down - ip link set can0 type can loopback off - ip link set can0 up type can bitrate 1000000 - ``` +```sh +ip link set can0 down +ip link set can0 type can loopback off +ip link set can0 up type can bitrate 1000000 +``` Following command sends 8 bytes to device with id 99 (for petalinux) ```` @@ -687,5 +690,4 @@ After that, an update can be merged by running git merge upstream/master ``` -Alternatively, changes from other upstreams (forks) and branches can be merged like that in -the same way. \ No newline at end of file +Alternatively, changes from other upstreams (forks) and branches can be merged like that in the same way. diff --git a/bsp_q7s/CMakeLists.txt b/bsp_q7s/CMakeLists.txt index d4f69217..3bc9aa4e 100644 --- a/bsp_q7s/CMakeLists.txt +++ b/bsp_q7s/CMakeLists.txt @@ -12,4 +12,5 @@ else() add_subdirectory(gpio) add_subdirectory(core) add_subdirectory(memory) + add_subdirectory(spiCallbacks) endif() diff --git a/bsp_q7s/core/ObjectFactory.cpp b/bsp_q7s/core/ObjectFactory.cpp index bb0edf82..5f015ff1 100644 --- a/bsp_q7s/core/ObjectFactory.cpp +++ b/bsp_q7s/core/ObjectFactory.cpp @@ -10,6 +10,7 @@ #include "bsp_q7s/gpio/gpioCallbacks.h" #include "bsp_q7s/core/CoreController.h" +#include "bsp_q7s/spiCallbacks/rwSpiCallback.h" #include #include @@ -32,11 +33,13 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include @@ -519,8 +522,6 @@ void ObjectFactory::produce(void* args){ Max31865PT1000Handler* rtdIc16 = new Max31865PT1000Handler(objects::RTD_IC16, objects::SPI_COM_IF, spiRtdIc16, 0); Max31865PT1000Handler* rtdIc17 = new Max31865PT1000Handler(objects::RTD_IC17, objects::SPI_COM_IF, spiRtdIc17, 0); Max31865PT1000Handler* rtdIc18 = new Max31865PT1000Handler(objects::RTD_IC18, objects::SPI_COM_IF, spiRtdIc18, 0); - rtdIc17->setStartUpImmediately(); -// rtdIc4->setStartUpImmediately(); (void) rtdIc3; (void) rtdIc4; @@ -536,7 +537,7 @@ void ObjectFactory::produce(void* args){ (void) rtdIc14; (void) rtdIc15; (void) rtdIc16; -// (void) rtdIc17; + (void) rtdIc17; (void) rtdIc18; #endif /* Q7S_ADD_RTD_DEVICES == 1 */ @@ -545,12 +546,76 @@ void ObjectFactory::produce(void* args){ std::string("/dev/i2c-0")); new IMTQHandler(objects::IMTQ_HANDLER, objects::I2C_COM_IF, imtqI2cCookie); - UartCookie* plocUartCookie = new UartCookie(objects::PLOC_HANDLER, std::string("/dev/ttyUL3"), + UartCookie* plocUartCookie = new UartCookie(objects::RW1, std::string("/dev/ttyUL3"), UartModes::NON_CANONICAL, 115200, PLOC::MAX_REPLY_SIZE); - PlocHandler* plocHandler = new PlocHandler(objects::PLOC_HANDLER, objects::UART_COM_IF, - plocUartCookie); -// plocHandler->setStartUpImmediately(); - (void) plocHandler; + new PlocHandler(objects::PLOC_HANDLER, objects::UART_COM_IF, plocUartCookie); + + GpioCookie* gpioCookieRw = new GpioCookie; + GpioCallback* csRw1 = new GpioCallback(std::string("Chip select reaction wheel 1"), gpio::OUT, + 1, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); + gpioCookieRw->addGpio(gpioIds::CS_RW1, csRw1); + GpioCallback* csRw2 = new GpioCallback(std::string("Chip select reaction wheel 2"), gpio::OUT, + 1, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); + gpioCookieRw->addGpio(gpioIds::CS_RW2, csRw2); + GpioCallback* csRw3 = new GpioCallback(std::string("Chip select reaction wheel 3"), gpio::OUT, + 1, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); + gpioCookieRw->addGpio(gpioIds::CS_RW3, csRw3); + GpioCallback* csRw4 = new GpioCallback(std::string("Chip select reaction wheel 4"), gpio::OUT, + 1, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); + gpioCookieRw->addGpio(gpioIds::CS_RW4, csRw4); + + GpiodRegular* enRw1 = new GpiodRegular(std::string("gpiochip5"), 7, + std::string("Enable reaction wheel 1"), gpio::OUT, 0); + gpioCookieRw->addGpio(gpioIds::EN_RW1, enRw1); + GpiodRegular* enRw2 = new GpiodRegular(std::string("gpiochip5"), 3, + std::string("Enable reaction wheel 2"), gpio::OUT, 0); + gpioCookieRw->addGpio(gpioIds::EN_RW2, enRw2); + GpiodRegular* enRw3 = new GpiodRegular(std::string("gpiochip5"), 11, + std::string("Enable reaction wheel 3"), gpio::OUT, 0); + gpioCookieRw->addGpio(gpioIds::EN_RW3, enRw3); + GpiodRegular* enRw4 = new GpiodRegular(std::string("gpiochip5"), 6, + std::string("Enable reaction wheel 4"), gpio::OUT, 0); + gpioCookieRw->addGpio(gpioIds::EN_RW4, enRw4); + + /** + * This GPIO is only internally connected to the SPI MUX module and responsible to disconnect + * the PS SPI peripheral from the SPI interface and route out the SPI lines of the AXI SPI core. + * Per default the PS SPI is selected (EMIO = 0). + */ + GpiodRegular* spiMux = new GpiodRegular(std::string("gpiochip11"), 54, + std::string("EMIO 0 SPI Mux"), gpio::OUT, 0); + gpioCookieRw->addGpio(gpioIds::SPI_MUX, spiMux); + + gpioComIF->addGpios(gpioCookieRw); + + auto rw1SpiCookie = new SpiCookie(addresses::RW1, gpioIds::CS_RW1, "/dev/spidev3.0", + RwDefinitions::MAX_REPLY_SIZE, spi::RW_MODE, spi::RW_SPEED, &rwSpiCallback::spiCallback, + nullptr); + auto rw2SpiCookie = new SpiCookie(addresses::RW2, gpioIds::CS_RW2, "/dev/spidev3.0", + RwDefinitions::MAX_REPLY_SIZE, spi::RW_MODE, spi::RW_SPEED, &rwSpiCallback::spiCallback, + nullptr); + auto rw3SpiCookie = new SpiCookie(addresses::RW3, gpioIds::CS_RW3, "/dev/spidev3.0", + RwDefinitions::MAX_REPLY_SIZE, spi::RW_MODE, spi::RW_SPEED, &rwSpiCallback::spiCallback, + nullptr); + auto rw4SpiCookie = new SpiCookie(addresses::RW4, gpioIds::CS_RW4, "/dev/spidev3.0", + RwDefinitions::MAX_REPLY_SIZE, spi::RW_MODE, spi::RW_SPEED, &rwSpiCallback::spiCallback, + nullptr); + + auto rwHandler1 = new RwHandler(objects::RW1, objects::SPI_COM_IF, rw1SpiCookie, gpioComIF, + gpioIds::EN_RW1); + rw1SpiCookie->setCallbackArgs(rwHandler1); + + auto rwHandler2 = new RwHandler(objects::RW2, objects::SPI_COM_IF, rw2SpiCookie, gpioComIF, + gpioIds::EN_RW2); + rw2SpiCookie->setCallbackArgs(rwHandler2); + + auto rwHandler3 = new RwHandler(objects::RW3, objects::SPI_COM_IF, rw3SpiCookie, gpioComIF, + gpioIds::EN_RW3); + rw3SpiCookie->setCallbackArgs(rwHandler3); + + auto rwHandler4 = new RwHandler(objects::RW4, objects::SPI_COM_IF, rw4SpiCookie, gpioComIF, + gpioIds::EN_RW4); + rw4SpiCookie->setCallbackArgs(rwHandler4); #endif /* TE0720 == 0 */ diff --git a/bsp_q7s/gpio/gpioCallbacks.cpp b/bsp_q7s/gpio/gpioCallbacks.cpp index 2f59cb0e..5499517b 100644 --- a/bsp_q7s/gpio/gpioCallbacks.cpp +++ b/bsp_q7s/gpio/gpioCallbacks.cpp @@ -45,11 +45,13 @@ void initSpiCsDecoder(GpioIF* gpioComIF) { GpiodRegular* spiMuxBit6 = new GpiodRegular(std::string("gpiochip7"), 18, std::string("SPI Mux Bit 6"), gpio::OUT, 0); spiMuxGpios->addGpio(gpioIds::SPI_MUX_BIT_6, spiMuxBit6); + GpiodRegular* enRwDecoder = new GpiodRegular(std::string("gpiochip5"), 17, + std::string("EN_RW_CS"), gpio::OUT, 1); + spiMuxGpios->addGpio(gpioIds::EN_RW_CS, enRwDecoder); result = gpioComInterface->addGpios(spiMuxGpios); if (result != HasReturnvaluesIF::RETURN_OK) { - sif::error << "initSpiCsDecoder: Failed to add mux bit gpios to gpioComIF" - << std::endl; + sif::error << "initSpiCsDecoder: Failed to add mux bit gpios to gpioComIF" << std::endl; return; } } @@ -218,6 +220,26 @@ void spiCsDecoderCallback(gpioId_t gpioId, gpio::GpioOperation gpioOp, int value selectY6(); break; } + case(gpioIds::CS_RW1): { + enableRwDecoder(); + selectY0(); + break; + } + case(gpioIds::CS_RW2): { + enableRwDecoder(); + selectY1(); + break; + } + case(gpioIds::CS_RW3): { + enableRwDecoder(); + selectY2(); + break; + } + case(gpioIds::CS_RW4): { + enableRwDecoder(); + selectY3(); + break; + } default: sif::debug << "spiCsDecoderCallback: Invalid gpio id " << gpioId << std::endl; } @@ -251,6 +273,13 @@ void enableDecoderInterfaceBoardIc2() { gpioComInterface->pullHigh(gpioIds::SPI_MUX_BIT_3); } +void enableRwDecoder() { + gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_1); + gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_2); + gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_3); + gpioComInterface->pullHigh(gpioIds::EN_RW_CS); +} + void selectY0() { gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_4); gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_5); @@ -303,6 +332,7 @@ void disableAllDecoder() { gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_1); gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_2); gpioComInterface->pullLow(gpioIds::SPI_MUX_BIT_3); + gpioComInterface->pullLow(gpioIds::EN_RW_CS); } } diff --git a/bsp_q7s/gpio/gpioCallbacks.h b/bsp_q7s/gpio/gpioCallbacks.h index 4a0c73cb..eaf9a701 100644 --- a/bsp_q7s/gpio/gpioCallbacks.h +++ b/bsp_q7s/gpio/gpioCallbacks.h @@ -43,6 +43,11 @@ namespace gpioCallbacks { */ void enableDecoderInterfaceBoardIc2(); + /** + * @brief Enables the reaction wheel chip select decoder (IC3). + */ + void enableRwDecoder(); + /** * @brief This function disables all decoder. */ diff --git a/bsp_q7s/spi/Q7sSpiComIF.cpp b/bsp_q7s/spi/Q7sSpiComIF.cpp new file mode 100644 index 00000000..23dbe551 --- /dev/null +++ b/bsp_q7s/spi/Q7sSpiComIF.cpp @@ -0,0 +1,9 @@ +#include + +Q7sSpiComIF::Q7sSpiComIF(object_id_t objectId, GpioIF* gpioComIF) : + SpiComIF(objectId, gpioComIF) { +} + +Q7sSpiComIF::~Q7sSpiComIF() { +} + diff --git a/bsp_q7s/spi/Q7sSpiComIF.h b/bsp_q7s/spi/Q7sSpiComIF.h new file mode 100644 index 00000000..a10d63dd --- /dev/null +++ b/bsp_q7s/spi/Q7sSpiComIF.h @@ -0,0 +1,33 @@ +#ifndef BSP_Q7S_SPI_Q7SSPICOMIF_H_ +#define BSP_Q7S_SPI_Q7SSPICOMIF_H_ + +#include + + +/** + * @brief This additional communication interface is required because the SPI busses behind the + * devices "/dev/spi2.0" and "dev/spidev3.0" are multiplexed to one SPI interface. + * This was necessary because the processing system spi (/dev/spi2.0) does not support + * frequencies lower than 650 kHz. To reach lower frequencies also the CPU frequency must + * be reduced which leads to other effects compromising kernel drivers. + * The nano avionics reaction wheels require a spi frequency between 150 kHz and 300 kHz + * why an additional AXI SPI core has been implemented in the programmable logic. However, + * the spi frequency of the AXI SPI core is not configurable during runtime. Therefore, + * this communication interface multiplexes either the hard-wired SPI or the AXI SPI to + * the SPI interface. The multiplexing is performed via a GPIO connected to a VHDL + * module responsible for switching between the to SPI peripherals. + */ +class Q7sSpiComIF: public SpiComIF { +public: + /** + * @brief Constructor + * + * @param objectId + * @param gpioComIF + * @param gpioSwitchId The gpio ID of the GPIO connected to the SPI mux module in the PL. + */ + Q7sSpiComIF(object_id_t objectId, GpioIF* gpioComIF, gpioId_t gpioSwitchId); + virtual ~Q7sSpiComIF(); +}; + +#endif /* BSP_Q7S_SPI_Q7SSPICOMIF_H_ */ diff --git a/bsp_q7s/spiCallbacks/CMakeLists.txt b/bsp_q7s/spiCallbacks/CMakeLists.txt new file mode 100644 index 00000000..59d507e6 --- /dev/null +++ b/bsp_q7s/spiCallbacks/CMakeLists.txt @@ -0,0 +1,3 @@ +target_sources(${TARGET_NAME} PRIVATE + rwSpiCallback.cpp +) diff --git a/bsp_q7s/spiCallbacks/rwSpiCallback.cpp b/bsp_q7s/spiCallbacks/rwSpiCallback.cpp new file mode 100644 index 00000000..f05fbbdf --- /dev/null +++ b/bsp_q7s/spiCallbacks/rwSpiCallback.cpp @@ -0,0 +1,236 @@ +#include +#include +#include +#include +#include +#include "devices/gpioIds.h" + +namespace rwSpiCallback { + +ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie *cookie, const uint8_t *sendData, + size_t sendLen, void* args) { + + ReturnValue_t result = HasReturnvaluesIF::RETURN_OK; + + RwHandler* handler = reinterpret_cast(args); + if(handler == nullptr) { + sif::error << "rwSpiCallback::spiCallback: Pointer to handler is invalid" + << std::endl; + return HasReturnvaluesIF::RETURN_FAILED; + } + + uint8_t writeBuffer[2]; + uint8_t writeSize = 0; + + int fileDescriptor = 0; + std::string device = cookie->getSpiDevice(); + UnixFileGuard fileHelper(device, &fileDescriptor, O_RDWR, "rwSpiCallback::spiCallback: "); + if(fileHelper.getOpenResult() != HasReturnvaluesIF::RETURN_OK) { + sif::error << "rwSpiCallback::spiCallback: Failed to open device file" << std::endl; + return SpiComIF::OPENING_FILE_FAILED; + } + spi::SpiModes spiMode = spi::SpiModes::MODE_0; + uint32_t spiSpeed = 0; + cookie->getSpiParameters(spiMode, spiSpeed, nullptr); + comIf->setSpiSpeedAndMode(fileDescriptor, spiMode, spiSpeed); + + gpioId_t gpioId = cookie->getChipSelectPin(); + GpioIF* gpioIF = comIf->getGpioInterface(); + MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING; + uint32_t timeoutMs = 0; + MutexIF* mutex = comIf->getMutex(&timeoutType, &timeoutMs); + if(mutex == nullptr or gpioIF == nullptr) { + sif::debug << "rwSpiCallback::spiCallback: Mutex or GPIO interface invalid" << std::endl; + return HasReturnvaluesIF::RETURN_FAILED; + } + + result = mutex->lockMutex(timeoutType, timeoutMs); + if (result != HasReturnvaluesIF::RETURN_OK) { + sif::debug << "rwSpiCallback::spiCallback: Failed to lock mutex" << std::endl; + return result; + } + + /** Disconnect PS SPI peripheral and select AXI SPI core */ + if(gpioIF->pullHigh(gpioIds::SPI_MUX) != HasReturnvaluesIF::RETURN_OK) { + sif::error << "rwSpiCallback::spiCallback: Failed to pull spi mux gpio high" << std::endl; + } + + /** Sending frame start sign */ + writeBuffer[0] = 0x7E; + writeSize = 1; + + // Pull SPI CS low. For now, no support for active high given + if(gpioId != gpio::NO_GPIO) { + if(gpioIF->pullLow(gpioId) != HasReturnvaluesIF::RETURN_OK) { + sif::error << "rwSpiCallback::spiCallback: Failed to pull chip select low" << std::endl; + } + } + + if (write(fileDescriptor, writeBuffer, writeSize) != static_cast(writeSize)) { + sif::error << "rwSpiCallback::spiCallback: Write failed!" << std::endl; + closeSpi(gpioId, gpioIF, mutex); + return RwHandler::SPI_WRITE_FAILURE; + } + + /** Encoding and sending command */ + size_t idx = 0; + while(idx < sendLen) { + switch(*(sendData + idx)) { + case 0x7E: + writeBuffer[0] = 0x7D; + writeBuffer[1] = 0x5E; + writeSize = 2; + break; + case 0x7D: + writeBuffer[0] = 0x7D; + writeBuffer[1] = 0x5D; + writeSize = 2; + break; + default: + writeBuffer[0] = *(sendData + idx); + writeSize = 1; + break; + } + if (write(fileDescriptor, writeBuffer, writeSize) != static_cast(writeSize)) { + sif::error << "rwSpiCallback::spiCallback: Write failed!" << std::endl; + closeSpi(gpioId, gpioIF, mutex); + return RwHandler::SPI_WRITE_FAILURE; + } + idx++; + } + + /** Sending frame end sign */ + writeBuffer[0] = 0x7E; + writeSize = 1; + + if (write(fileDescriptor, writeBuffer, writeSize) != static_cast(writeSize)) { + sif::error << "rwSpiCallback::spiCallback: Write failed!" << std::endl; + closeSpi(gpioId, gpioIF, mutex); + return RwHandler::SPI_WRITE_FAILURE; + } + + uint8_t* rxBuf = nullptr; + result = comIf->getReadBuffer(cookie->getSpiAddress(), &rxBuf); + if(result != HasReturnvaluesIF::RETURN_OK) { + closeSpi(gpioId, gpioIF, mutex); + return result; + } + + size_t replyBufferSize = cookie->getMaxBufferSize(); + + /** There must be a delay of 20 ms after sending the command */ + usleep(RwDefinitions::SPI_REPLY_DELAY); + + /** + * The reaction wheel responds with empty frames while preparing the reply data. + * However, receiving more than 5 empty frames will be interpreted as an error. + */ + uint8_t byteRead = 0; + for (int idx = 0; idx < 10; idx++) { + if(read(fileDescriptor, &byteRead, 1) != 1) { + sif::error << "rwSpiCallback::spiCallback: Read failed" << std::endl; + closeSpi(gpioId, gpioIF, mutex); + return RwHandler::SPI_READ_FAILURE; + } + + if (byteRead != 0x7E) { + break; + } + + if (idx == 9) { + sif::error << "rwSpiCallback::spiCallback: Empty frame timeout" << std::endl; + closeSpi(gpioId, gpioIF, mutex); + return RwHandler::NO_REPLY; + } + } + + size_t decodedFrameLen = 0; + while(decodedFrameLen < replyBufferSize) { + + /** First byte already read in */ + if (decodedFrameLen != 0) { + byteRead = 0; + if(read(fileDescriptor, &byteRead, 1) != 1) { + sif::error << "rwSpiCallback::spiCallback: Read failed" << std::endl; + result = RwHandler::SPI_READ_FAILURE; + break; + } + } + + if (byteRead == 0x7E) { + /** Reached end of frame */ + break; + } + else if (byteRead == 0x7D) { + if(read(fileDescriptor, &byteRead, 1) != 1) { + sif::error << "rwSpiCallback::spiCallback: Read failed" << std::endl; + result = RwHandler::SPI_READ_FAILURE; + break; + } + if (byteRead == 0x5E) { + *(rxBuf + decodedFrameLen) = 0x7E; + decodedFrameLen++; + continue; + } + else if (byteRead == 0x5D) { + *(rxBuf + decodedFrameLen) = 0x7D; + decodedFrameLen++; + continue; + } + else { + sif::error << "rwSpiCallback::spiCallback: Invalid substitute" << std::endl; + closeSpi(gpioId, gpioIF, mutex); + result = RwHandler::INVALID_SUBSTITUTE; + break; + } + } + else { + *(rxBuf + decodedFrameLen) = byteRead; + decodedFrameLen++; + continue; + } + + /** + * There might be the unlikely case that each byte in a get-telemetry reply has been + * replaced by its substitute. Than the next byte must correspond to the end sign 0x7E. + * Otherwise there might be something wrong. + */ + if (decodedFrameLen == replyBufferSize) { + if(read(fileDescriptor, &byteRead, 1) != 1) { + sif::error << "rwSpiCallback::spiCallback: Failed to read last byte" << std::endl; + result = RwHandler::SPI_READ_FAILURE; + break; + } + if (byteRead != 0x7E) { + sif::error << "rwSpiCallback::spiCallback: Missing end sign 0x7E" << std::endl; + decodedFrameLen--; + result = RwHandler::MISSING_END_SIGN; + break; + } + } + result = HasReturnvaluesIF::RETURN_OK; + } + + cookie->assignTransferSize(decodedFrameLen); + + closeSpi(gpioId, gpioIF, mutex); + + return result; +} + +void closeSpi (gpioId_t gpioId, GpioIF* gpioIF, MutexIF* mutex) { + if(gpioId != gpio::NO_GPIO) { + if (gpioIF->pullHigh(gpioId) != HasReturnvaluesIF::RETURN_OK) { + sif::error << "closeSpi: Failed to pull chip select high" << std::endl; + } + } + if(mutex->unlockMutex() != HasReturnvaluesIF::RETURN_OK) { + sif::error << "rwSpiCallback::closeSpi: Failed to unlock mutex" << std::endl;; + } + + /** Route SPI interface again to PS SPI peripheral */ + if(gpioIF->pullLow(gpioIds::SPI_MUX) != HasReturnvaluesIF::RETURN_OK) { + sif::error << "rwSpiCallback::spiCallback: Failed to pull spi mux gpio low" << std::endl; + } +} +} diff --git a/bsp_q7s/spiCallbacks/rwSpiCallback.h b/bsp_q7s/spiCallbacks/rwSpiCallback.h new file mode 100644 index 00000000..e5a79e64 --- /dev/null +++ b/bsp_q7s/spiCallbacks/rwSpiCallback.h @@ -0,0 +1,44 @@ +#ifndef BSP_Q7S_RW_SPI_CALLBACK_H_ +#define BSP_Q7S_RW_SPI_CALLBACK_H_ + +#include +#include +#include + + +namespace rwSpiCallback { + +/** + * @brief This is the callback function to send commands to the nano avionics reaction wheels and + * receive the replies. + * + * @details The data to sent are additionally encoded according to the HDLC framing defined in the + * datasheet of the reaction wheels: + * https://eive-cloud.irs.uni-stuttgart.de/index.php/apps/files/?dir=/EIVE_IRS/ + * Arbeitsdaten/08_Used%20Components/Nanoavionics_Reactionwheels&fileid=181622 + * Each command entails exactly one reply which will also be read in and decoded by this + * function. + * Because the reaction wheels require a spi clock frequency of maximum 300 kHZ and minimum + * 150 kHz which is not supported by the processing system SPI peripheral an AXI SPI core + * has been implemented in the programmable logic. This AXI SPI core works with a fixed + * frequency of 250 kHz. + * To allow the parallel usage of the same physical SPI bus, a VHDL module has been + * implemented which is able to disconnect the hard-wired SPI peripheral of the PS and + * route the AXI SPI to the SPI lines. + * To switch between the to SPI peripherals, an EMIO is used which will also be controlled + * by this function. + */ +ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie *cookie, const uint8_t *sendData, + size_t sendLen, void* args); + +/** + * @brief This function closes a spi session. Pulls the chip select to high an releases the + * mutex. + * @param gpioId Gpio ID of chip select + * @param gpioIF Pointer to gpio interface to drive the chip select + * @param mutex The spi mutex + */ +void closeSpi(gpioId_t gpioId, GpioIF* gpioIF, MutexIF* mutex); + +} +#endif /* BSP_Q7S_RW_SPI_CALLBACK_H_ */ diff --git a/common/config/commonClassIds.h b/common/config/commonClassIds.h index 7a53bdf0..8a4a8121 100644 --- a/common/config/commonClassIds.h +++ b/common/config/commonClassIds.h @@ -13,6 +13,7 @@ enum commonClassIds: uint8_t { HEATER_HANDLER, //HEATER SYRLINKS_HANDLER, //SYRLINKS IMTQ_HANDLER, //IMTQ + RW_HANDLER, //Reaction Wheels PLOC_HANDLER, //PLOC SUS_HANDLER, //SUSS CCSDS_IP_CORE_BRIDGE, // IP Core interface diff --git a/common/config/commonObjects.h b/common/config/commonObjects.h index 93369350..1fb755e3 100644 --- a/common/config/commonObjects.h +++ b/common/config/commonObjects.h @@ -71,7 +71,12 @@ enum commonObjects: uint32_t { SUS_13 = 0x44120044, GPS0_HANDLER = 0x44130045, - GPS1_HANDLER = 0x44130146 + GPS1_HANDLER = 0x44130146, + + RW1 = 0x44210001, + RW2 = 0x44210002, + RW3 = 0x44210003, + RW4 = 0x44210004 }; } diff --git a/common/config/commonSubsystemIds.h b/common/config/commonSubsystemIds.h index 0bc3e1dd..bc2fe400 100644 --- a/common/config/commonSubsystemIds.h +++ b/common/config/commonSubsystemIds.h @@ -13,6 +13,7 @@ enum: uint8_t { SA_DEPL_HANDLER = 110, PLOC_HANDLER = 111, IMTQ_HANDLER = 112, + RW_HANDLER = 113, COMMON_SUBSYSTEM_ID_END }; } diff --git a/common/config/spiConf.h b/common/config/spiConf.h index 2632924d..47600eb3 100644 --- a/common/config/spiConf.h +++ b/common/config/spiConf.h @@ -26,6 +26,9 @@ static constexpr spi::SpiModes DEFAULT_MAX_1227_MODE = spi::SpiModes::MODE_3; static constexpr uint32_t DEFAULT_ADIS16507_SPEED = 976'000; static constexpr spi::SpiModes DEFAULT_ADIS16507_MODE = spi::SpiModes::MODE_3; +static constexpr uint32_t RW_SPEED = 300000; +static constexpr spi::SpiModes RW_MODE = spi::SpiModes::MODE_0; + } #endif /* COMMON_CONFIG_SPICONF_H_ */ diff --git a/fsfw_hal b/fsfw_hal index 0f0fc0c2..8ff09c95 160000 --- a/fsfw_hal +++ b/fsfw_hal @@ -1 +1 @@ -Subproject commit 0f0fc0c2a69494de78856d956b679d9ee6ec339f +Subproject commit 8ff09c95a69f1f43fec6104d6cce1e788b2b870d diff --git a/generators/bsp_q7s_events.csv b/generators/bsp_q7s_events.csv index 81459869..c895aebb 100644 --- a/generators/bsp_q7s_events.csv +++ b/generators/bsp_q7s_events.csv @@ -81,3 +81,12 @@ 11102;ACK_FAILURE;LOW; ;../../mission/devices/PlocHandler.h 11103;EXE_FAILURE;LOW; ;../../mission/devices/PlocHandler.h 11104;CRC_FAILURE_EVENT;LOW; ;../../mission/devices/PlocHandler.h +11201;SELF_TEST_I2C_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11202;SELF_TEST_SPI_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11203;SELF_TEST_ADC_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11204;SELF_TEST_PWM_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11205;SELF_TEST_TC_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11206;SELF_TEST_MTM_RANGE_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11207;SELF_TEST_COIL_CURRENT_FAILURE;LOW; ;../../mission/devices/IMTQHandler.h +11208;INVALID_ERROR_BYTE;LOW; ;../../mission/devices/IMTQHandler.h +11301;ERROR_STATE;HIGH; ;../../mission/devices/RwHandler.h diff --git a/generators/bsp_q7s_objects.csv b/generators/bsp_q7s_objects.csv index 8df83d6a..e0180089 100644 --- a/generators/bsp_q7s_objects.csv +++ b/generators/bsp_q7s_objects.csv @@ -1,52 +1,74 @@ 0x00005060;P60DOCK_TEST_TASK -0x44000001;P60DOCK_HANDLER -0x44000002;PDU1_HANDLER -0x44000003;PDU2_HANDLER -0x44000004;ACU_HANDLER -0x44000005;TMP1075_HANDLER_1 -0x44000006;TMP1075_HANDLER_2 -0x44000007;MGM_0_LIS3_HANDLER -0x44000008;MGM_1_RM3100_HANDLER -0x44000009;MGM_2_LIS3_HANDLER -0x44000010;MGM_3_RM3100_HANDLER -0x44000011;GYRO_0_ADIS_HANDLER -0x44000012;GYRO_1_L3G_HANDLER -0x44000013;GYRO_2_L3G_HANDLER -0x44000014;IMTQ_HANDLER -0x44000015;PLOC_HANDLER -0x44000016;SUS_1 -0x44000017;SUS_2 -0x44000018;SUS_3 -0x44000019;SUS_4 -0x4400001A;SUS_5 -0x4400001B;SUS_6 -0x4400001C;SUS_7 -0x4400001D;SUS_8 -0x4400001E;SUS_9 -0x4400001F;SUS_10 -0x44000021;SUS_11 -0x44000022;SUS_12 -0x44000023;SUS_13 -0x44001000;PCDU_HANDLER -0x44001001;SOLAR_ARRAY_DEPL_HANDLER -0x44001002;SYRLINKS_HK_HANDLER -0x47000001;GPIO_IF -0x49000001;ARDUINO_COM_IF -0x49000002;CSP_COM_IF -0x49000003;I2C_COM_IF -0x49000004;UART_COM_IF -0x49000005;SPI_COM_IF +0x43000003;CORE_CONTROLLER +0x43100002;ACS_CONTROLLER +0x43400001;THERMAL_CONTROLLER +0x44120006;MGM_0_LIS3_HANDLER +0x44120010;GYRO_0_ADIS_HANDLER +0x44120032;SUS_1 +0x44120033;SUS_2 +0x44120034;SUS_3 +0x44120035;SUS_4 +0x44120036;SUS_5 +0x44120037;SUS_6 +0x44120038;SUS_7 +0x44120039;SUS_8 +0x44120040;SUS_9 +0x44120041;SUS_10 +0x44120042;SUS_11 +0x44120043;SUS_12 +0x44120044;SUS_13 +0x44120107;MGM_1_RM3100_HANDLER +0x44120111;GYRO_1_L3G_HANDLER +0x44120208;MGM_2_LIS3_HANDLER +0x44120212;GYRO_2_ADIS_HANDLER +0x44120309;MGM_3_RM3100_HANDLER +0x44120313;GYRO_3_L3G_HANDLER +0x44130045;GPS0_HANDLER +0x44130146;GPS1_HANDLER +0x44140014;IMTQ_HANDLER +0x442000A1;PCDU_HANDLER +0x44210001;RW1 +0x44210002;RW2 +0x44210003;RW3 +0x44210004;RW4 +0x44250000;P60DOCK_HANDLER +0x44250001;PDU1_HANDLER +0x44250002;PDU2_HANDLER +0x44250003;ACU_HANDLER +0x443200A5;RAD_SENSOR +0x44330015;PLOC_HANDLER +0x444100A2;SOLAR_ARRAY_DEPL_HANDLER +0x444100A4;HEATER_HANDLER +0x44420004;TMP1075_HANDLER_1 +0x44420005;TMP1075_HANDLER_2 +0x44420016;RTD_IC3 +0x44420017;RTD_IC4 +0x44420018;RTD_IC5 +0x44420019;RTD_IC6 +0x44420020;RTD_IC7 +0x44420021;RTD_IC8 +0x44420022;RTD_IC9 +0x44420023;RTD_IC10 +0x44420024;RTD_IC11 +0x44420025;RTD_IC12 +0x44420026;RTD_IC13 +0x44420027;RTD_IC14 +0x44420028;RTD_IC15 +0x44420029;RTD_IC16 +0x44420030;RTD_IC17 +0x44420031;RTD_IC18 +0x445300A3;SYRLINKS_HK_HANDLER +0x49000000;ARDUINO_COM_IF +0x49010005;GPIO_IF +0x49020004;SPI_COM_IF +0x49030003;UART_COM_IF +0x49040002;I2C_COM_IF +0x49050001;CSP_COM_IF 0x50000100;CCSDS_PACKET_DISTRIBUTOR 0x50000200;PUS_PACKET_DISTRIBUTOR 0x50000300;UDP_BRIDGE 0x50000400;UDP_POLLING_TASK -0x51000300;PUS_SERVICE_3 -0x51000400;PUS_SERVICE_5 0x51000500;PUS_SERVICE_6 -0x51000800;PUS_SERVICE_8 -0x51002300;PUS_SERVICE_23 -0x51020100;PUS_SERVICE_201 -0x52000002;TM_FUNNEL 0x53000000;FSFW_OBJECTS_START 0x53000001;PUS_SERVICE_1_VERIFICATION 0x53000002;PUS_SERVICE_2_DEVICE_ACCESS @@ -67,27 +89,12 @@ 0x534f0300;IPC_STORE 0x53500010;TIME_STAMPER 0x53ffffff;FSFW_OBJECTS_END -0x54000003;HEATER_HANDLER -0x54000004;RTD_IC3 -0x54000005;RTD_IC4 -0x54000006;RTD_IC5 -0x54000007;RTD_IC6 -0x54000008;RTD_IC7 -0x54000009;RTD_IC8 -0x5400000A;RTD_IC9 -0x5400000B;RTD_IC10 -0x5400000C;RTD_IC11 -0x5400000D;RTD_IC12 -0x5400000E;RTD_IC13 -0x5400000F;RTD_IC14 0x54000010;SPI_TEST -0x5400001F;RTD_IC15 -0x5400002F;RTD_IC16 -0x5400003F;RTD_IC17 -0x5400004F;RTD_IC18 -0x54000050;RAD_SENSOR +0x54000020;UART_TEST 0x5400AFFE;DUMMY_HANDLER 0x5400CAFE;DUMMY_INTERFACE 0x54123456;LIBGPIOD_TEST 0x54694269;TEST_TASK +0x73000100;TM_FUNNEL +0x73500000;CCSDS_IP_CORE_BRIDGE 0xFFFFFFFF;NO_OBJECT diff --git a/generators/events/translateEvents.cpp b/generators/events/translateEvents.cpp index c3af08e1..9ae81646 100644 --- a/generators/events/translateEvents.cpp +++ b/generators/events/translateEvents.cpp @@ -1,7 +1,7 @@ /** - * @brief Auto-generated event translation file. Contains 83 translations. + * @brief Auto-generated event translation file. Contains 92 translations. * @details - * Generated on: 2021-06-08 17:09:32 + * Generated on: 2021-06-29 16:20:09 */ #include "translateEvents.h" @@ -88,6 +88,15 @@ const char *MEMORY_READ_RPT_CRC_FAILURE_STRING = "MEMORY_READ_RPT_CRC_FAILURE"; const char *ACK_FAILURE_STRING = "ACK_FAILURE"; const char *EXE_FAILURE_STRING = "EXE_FAILURE"; const char *CRC_FAILURE_EVENT_STRING = "CRC_FAILURE_EVENT"; +const char *SELF_TEST_I2C_FAILURE_STRING = "SELF_TEST_I2C_FAILURE"; +const char *SELF_TEST_SPI_FAILURE_STRING = "SELF_TEST_SPI_FAILURE"; +const char *SELF_TEST_ADC_FAILURE_STRING = "SELF_TEST_ADC_FAILURE"; +const char *SELF_TEST_PWM_FAILURE_STRING = "SELF_TEST_PWM_FAILURE"; +const char *SELF_TEST_TC_FAILURE_STRING = "SELF_TEST_TC_FAILURE"; +const char *SELF_TEST_MTM_RANGE_FAILURE_STRING = "SELF_TEST_MTM_RANGE_FAILURE"; +const char *SELF_TEST_COIL_CURRENT_FAILURE_STRING = "SELF_TEST_COIL_CURRENT_FAILURE"; +const char *INVALID_ERROR_BYTE_STRING = "INVALID_ERROR_BYTE"; +const char *ERROR_STATE_STRING = "ERROR_STATE"; const char * translateEvents(Event event) { switch( (event & 0xffff) ) { @@ -257,6 +266,24 @@ const char * translateEvents(Event event) { return EXE_FAILURE_STRING; case(11104): return CRC_FAILURE_EVENT_STRING; + case(11201): + return SELF_TEST_I2C_FAILURE_STRING; + case(11202): + return SELF_TEST_SPI_FAILURE_STRING; + case(11203): + return SELF_TEST_ADC_FAILURE_STRING; + case(11204): + return SELF_TEST_PWM_FAILURE_STRING; + case(11205): + return SELF_TEST_TC_FAILURE_STRING; + case(11206): + return SELF_TEST_MTM_RANGE_FAILURE_STRING; + case(11207): + return SELF_TEST_COIL_CURRENT_FAILURE_STRING; + case(11208): + return INVALID_ERROR_BYTE_STRING; + case(11301): + return ERROR_STATE_STRING; default: return "UNKNOWN_EVENT"; } diff --git a/generators/objects/translateObjects.cpp b/generators/objects/translateObjects.cpp index 47b55435..2068158b 100644 --- a/generators/objects/translateObjects.cpp +++ b/generators/objects/translateObjects.cpp @@ -1,27 +1,17 @@ -/** +/** * @brief Auto-generated object translation file. * @details - * Contains 93 translations. - * Generated on: 2021-05-18 16:48:46 + * Contains 100 translations. + * Generated on: 2021-06-29 16:19:57 */ #include "translateObjects.h" const char *P60DOCK_TEST_TASK_STRING = "P60DOCK_TEST_TASK"; -const char *P60DOCK_HANDLER_STRING = "P60DOCK_HANDLER"; -const char *PDU1_HANDLER_STRING = "PDU1_HANDLER"; -const char *PDU2_HANDLER_STRING = "PDU2_HANDLER"; -const char *ACU_HANDLER_STRING = "ACU_HANDLER"; -const char *TMP1075_HANDLER_1_STRING = "TMP1075_HANDLER_1"; -const char *TMP1075_HANDLER_2_STRING = "TMP1075_HANDLER_2"; +const char *CORE_CONTROLLER_STRING = "CORE_CONTROLLER"; +const char *ACS_CONTROLLER_STRING = "ACS_CONTROLLER"; +const char *THERMAL_CONTROLLER_STRING = "THERMAL_CONTROLLER"; const char *MGM_0_LIS3_HANDLER_STRING = "MGM_0_LIS3_HANDLER"; -const char *MGM_1_RM3100_HANDLER_STRING = "MGM_1_RM3100_HANDLER"; -const char *MGM_2_LIS3_HANDLER_STRING = "MGM_2_LIS3_HANDLER"; -const char *MGM_3_RM3100_HANDLER_STRING = "MGM_3_RM3100_HANDLER"; const char *GYRO_0_ADIS_HANDLER_STRING = "GYRO_0_ADIS_HANDLER"; -const char *GYRO_1_L3G_HANDLER_STRING = "GYRO_1_L3G_HANDLER"; -const char *GYRO_2_L3G_HANDLER_STRING = "GYRO_2_L3G_HANDLER"; -const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER"; -const char *PLOC_HANDLER_STRING = "PLOC_HANDLER"; const char *SUS_1_STRING = "SUS_1"; const char *SUS_2_STRING = "SUS_2"; const char *SUS_3_STRING = "SUS_3"; @@ -35,26 +25,58 @@ const char *SUS_10_STRING = "SUS_10"; const char *SUS_11_STRING = "SUS_11"; const char *SUS_12_STRING = "SUS_12"; const char *SUS_13_STRING = "SUS_13"; +const char *MGM_1_RM3100_HANDLER_STRING = "MGM_1_RM3100_HANDLER"; +const char *GYRO_1_L3G_HANDLER_STRING = "GYRO_1_L3G_HANDLER"; +const char *MGM_2_LIS3_HANDLER_STRING = "MGM_2_LIS3_HANDLER"; +const char *GYRO_2_ADIS_HANDLER_STRING = "GYRO_2_ADIS_HANDLER"; +const char *MGM_3_RM3100_HANDLER_STRING = "MGM_3_RM3100_HANDLER"; +const char *GYRO_3_L3G_HANDLER_STRING = "GYRO_3_L3G_HANDLER"; +const char *GPS0_HANDLER_STRING = "GPS0_HANDLER"; +const char *GPS1_HANDLER_STRING = "GPS1_HANDLER"; +const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER"; const char *PCDU_HANDLER_STRING = "PCDU_HANDLER"; +const char *RW1_STRING = "RW1"; +const char *RW2_STRING = "RW2"; +const char *RW3_STRING = "RW3"; +const char *RW4_STRING = "RW4"; +const char *P60DOCK_HANDLER_STRING = "P60DOCK_HANDLER"; +const char *PDU1_HANDLER_STRING = "PDU1_HANDLER"; +const char *PDU2_HANDLER_STRING = "PDU2_HANDLER"; +const char *ACU_HANDLER_STRING = "ACU_HANDLER"; +const char *RAD_SENSOR_STRING = "RAD_SENSOR"; +const char *PLOC_HANDLER_STRING = "PLOC_HANDLER"; const char *SOLAR_ARRAY_DEPL_HANDLER_STRING = "SOLAR_ARRAY_DEPL_HANDLER"; +const char *HEATER_HANDLER_STRING = "HEATER_HANDLER"; +const char *TMP1075_HANDLER_1_STRING = "TMP1075_HANDLER_1"; +const char *TMP1075_HANDLER_2_STRING = "TMP1075_HANDLER_2"; +const char *RTD_IC3_STRING = "RTD_IC3"; +const char *RTD_IC4_STRING = "RTD_IC4"; +const char *RTD_IC5_STRING = "RTD_IC5"; +const char *RTD_IC6_STRING = "RTD_IC6"; +const char *RTD_IC7_STRING = "RTD_IC7"; +const char *RTD_IC8_STRING = "RTD_IC8"; +const char *RTD_IC9_STRING = "RTD_IC9"; +const char *RTD_IC10_STRING = "RTD_IC10"; +const char *RTD_IC11_STRING = "RTD_IC11"; +const char *RTD_IC12_STRING = "RTD_IC12"; +const char *RTD_IC13_STRING = "RTD_IC13"; +const char *RTD_IC14_STRING = "RTD_IC14"; +const char *RTD_IC15_STRING = "RTD_IC15"; +const char *RTD_IC16_STRING = "RTD_IC16"; +const char *RTD_IC17_STRING = "RTD_IC17"; +const char *RTD_IC18_STRING = "RTD_IC18"; const char *SYRLINKS_HK_HANDLER_STRING = "SYRLINKS_HK_HANDLER"; -const char *GPIO_IF_STRING = "GPIO_IF"; const char *ARDUINO_COM_IF_STRING = "ARDUINO_COM_IF"; -const char *CSP_COM_IF_STRING = "CSP_COM_IF"; -const char *I2C_COM_IF_STRING = "I2C_COM_IF"; -const char *UART_COM_IF_STRING = "UART_COM_IF"; +const char *GPIO_IF_STRING = "GPIO_IF"; const char *SPI_COM_IF_STRING = "SPI_COM_IF"; +const char *UART_COM_IF_STRING = "UART_COM_IF"; +const char *I2C_COM_IF_STRING = "I2C_COM_IF"; +const char *CSP_COM_IF_STRING = "CSP_COM_IF"; const char *CCSDS_PACKET_DISTRIBUTOR_STRING = "CCSDS_PACKET_DISTRIBUTOR"; const char *PUS_PACKET_DISTRIBUTOR_STRING = "PUS_PACKET_DISTRIBUTOR"; const char *UDP_BRIDGE_STRING = "UDP_BRIDGE"; const char *UDP_POLLING_TASK_STRING = "UDP_POLLING_TASK"; -const char *PUS_SERVICE_3_STRING = "PUS_SERVICE_3"; -const char *PUS_SERVICE_5_STRING = "PUS_SERVICE_5"; const char *PUS_SERVICE_6_STRING = "PUS_SERVICE_6"; -const char *PUS_SERVICE_8_STRING = "PUS_SERVICE_8"; -const char *PUS_SERVICE_23_STRING = "PUS_SERVICE_23"; -const char *PUS_SERVICE_201_STRING = "PUS_SERVICE_201"; -const char *TM_FUNNEL_STRING = "TM_FUNNEL"; const char *FSFW_OBJECTS_START_STRING = "FSFW_OBJECTS_START"; const char *PUS_SERVICE_1_VERIFICATION_STRING = "PUS_SERVICE_1_VERIFICATION"; const char *PUS_SERVICE_2_DEVICE_ACCESS_STRING = "PUS_SERVICE_2_DEVICE_ACCESS"; @@ -75,109 +97,150 @@ const char *TM_STORE_STRING = "TM_STORE"; const char *IPC_STORE_STRING = "IPC_STORE"; const char *TIME_STAMPER_STRING = "TIME_STAMPER"; const char *FSFW_OBJECTS_END_STRING = "FSFW_OBJECTS_END"; -const char *HEATER_HANDLER_STRING = "HEATER_HANDLER"; -const char *RTD_IC3_STRING = "RTD_IC3"; -const char *RTD_IC4_STRING = "RTD_IC4"; -const char *RTD_IC5_STRING = "RTD_IC5"; -const char *RTD_IC6_STRING = "RTD_IC6"; -const char *RTD_IC7_STRING = "RTD_IC7"; -const char *RTD_IC8_STRING = "RTD_IC8"; -const char *RTD_IC9_STRING = "RTD_IC9"; -const char *RTD_IC10_STRING = "RTD_IC10"; -const char *RTD_IC11_STRING = "RTD_IC11"; -const char *RTD_IC12_STRING = "RTD_IC12"; -const char *RTD_IC13_STRING = "RTD_IC13"; -const char *RTD_IC14_STRING = "RTD_IC14"; const char *SPI_TEST_STRING = "SPI_TEST"; -const char *RTD_IC15_STRING = "RTD_IC15"; -const char *RTD_IC16_STRING = "RTD_IC16"; -const char *RTD_IC17_STRING = "RTD_IC17"; -const char *RTD_IC18_STRING = "RTD_IC18"; -const char *RAD_SENSOR_STRING = "RAD_SENSOR"; +const char *UART_TEST_STRING = "UART_TEST"; const char *DUMMY_HANDLER_STRING = "DUMMY_HANDLER"; const char *DUMMY_INTERFACE_STRING = "DUMMY_INTERFACE"; const char *LIBGPIOD_TEST_STRING = "LIBGPIOD_TEST"; const char *TEST_TASK_STRING = "TEST_TASK"; +const char *TM_FUNNEL_STRING = "TM_FUNNEL"; +const char *CCSDS_IP_CORE_BRIDGE_STRING = "CCSDS_IP_CORE_BRIDGE"; const char *NO_OBJECT_STRING = "NO_OBJECT"; const char* translateObject(object_id_t object) { switch( (object & 0xFFFFFFFF) ) { case 0x00005060: return P60DOCK_TEST_TASK_STRING; - case 0x44000001: - return P60DOCK_HANDLER_STRING; - case 0x44000002: - return PDU1_HANDLER_STRING; - case 0x44000003: - return PDU2_HANDLER_STRING; - case 0x44000004: - return ACU_HANDLER_STRING; - case 0x44000005: - return TMP1075_HANDLER_1_STRING; - case 0x44000006: - return TMP1075_HANDLER_2_STRING; - case 0x44000007: + case 0x43000003: + return CORE_CONTROLLER_STRING; + case 0x43100002: + return ACS_CONTROLLER_STRING; + case 0x43400001: + return THERMAL_CONTROLLER_STRING; + case 0x44120006: return MGM_0_LIS3_HANDLER_STRING; - case 0x44000008: - return MGM_1_RM3100_HANDLER_STRING; - case 0x44000009: - return MGM_2_LIS3_HANDLER_STRING; - case 0x44000010: - return MGM_3_RM3100_HANDLER_STRING; - case 0x44000011: + case 0x44120010: return GYRO_0_ADIS_HANDLER_STRING; - case 0x44000012: - return GYRO_1_L3G_HANDLER_STRING; - case 0x44000013: - return GYRO_2_L3G_HANDLER_STRING; - case 0x44000014: - return IMTQ_HANDLER_STRING; - case 0x44000015: - return PLOC_HANDLER_STRING; - case 0x44000016: + case 0x44120032: return SUS_1_STRING; - case 0x44000017: + case 0x44120033: return SUS_2_STRING; - case 0x44000018: + case 0x44120034: return SUS_3_STRING; - case 0x44000019: + case 0x44120035: return SUS_4_STRING; - case 0x4400001A: + case 0x44120036: return SUS_5_STRING; - case 0x4400001B: + case 0x44120037: return SUS_6_STRING; - case 0x4400001C: + case 0x44120038: return SUS_7_STRING; - case 0x4400001D: + case 0x44120039: return SUS_8_STRING; - case 0x4400001E: + case 0x44120040: return SUS_9_STRING; - case 0x4400001F: + case 0x44120041: return SUS_10_STRING; - case 0x44000021: + case 0x44120042: return SUS_11_STRING; - case 0x44000022: + case 0x44120043: return SUS_12_STRING; - case 0x44000023: + case 0x44120044: return SUS_13_STRING; - case 0x44001000: + case 0x44120107: + return MGM_1_RM3100_HANDLER_STRING; + case 0x44120111: + return GYRO_1_L3G_HANDLER_STRING; + case 0x44120208: + return MGM_2_LIS3_HANDLER_STRING; + case 0x44120212: + return GYRO_2_ADIS_HANDLER_STRING; + case 0x44120309: + return MGM_3_RM3100_HANDLER_STRING; + case 0x44120313: + return GYRO_3_L3G_HANDLER_STRING; + case 0x44130045: + return GPS0_HANDLER_STRING; + case 0x44130146: + return GPS1_HANDLER_STRING; + case 0x44140014: + return IMTQ_HANDLER_STRING; + case 0x442000A1: return PCDU_HANDLER_STRING; - case 0x44001001: + case 0x44210001: + return RW1_STRING; + case 0x44210002: + return RW2_STRING; + case 0x44210003: + return RW3_STRING; + case 0x44210004: + return RW4_STRING; + case 0x44250000: + return P60DOCK_HANDLER_STRING; + case 0x44250001: + return PDU1_HANDLER_STRING; + case 0x44250002: + return PDU2_HANDLER_STRING; + case 0x44250003: + return ACU_HANDLER_STRING; + case 0x443200A5: + return RAD_SENSOR_STRING; + case 0x44330015: + return PLOC_HANDLER_STRING; + case 0x444100A2: return SOLAR_ARRAY_DEPL_HANDLER_STRING; - case 0x44001002: + case 0x444100A4: + return HEATER_HANDLER_STRING; + case 0x44420004: + return TMP1075_HANDLER_1_STRING; + case 0x44420005: + return TMP1075_HANDLER_2_STRING; + case 0x44420016: + return RTD_IC3_STRING; + case 0x44420017: + return RTD_IC4_STRING; + case 0x44420018: + return RTD_IC5_STRING; + case 0x44420019: + return RTD_IC6_STRING; + case 0x44420020: + return RTD_IC7_STRING; + case 0x44420021: + return RTD_IC8_STRING; + case 0x44420022: + return RTD_IC9_STRING; + case 0x44420023: + return RTD_IC10_STRING; + case 0x44420024: + return RTD_IC11_STRING; + case 0x44420025: + return RTD_IC12_STRING; + case 0x44420026: + return RTD_IC13_STRING; + case 0x44420027: + return RTD_IC14_STRING; + case 0x44420028: + return RTD_IC15_STRING; + case 0x44420029: + return RTD_IC16_STRING; + case 0x44420030: + return RTD_IC17_STRING; + case 0x44420031: + return RTD_IC18_STRING; + case 0x445300A3: return SYRLINKS_HK_HANDLER_STRING; - case 0x47000001: - return GPIO_IF_STRING; - case 0x49000001: + case 0x49000000: return ARDUINO_COM_IF_STRING; - case 0x49000002: - return CSP_COM_IF_STRING; - case 0x49000003: - return I2C_COM_IF_STRING; - case 0x49000004: - return UART_COM_IF_STRING; - case 0x49000005: + case 0x49010005: + return GPIO_IF_STRING; + case 0x49020004: return SPI_COM_IF_STRING; + case 0x49030003: + return UART_COM_IF_STRING; + case 0x49040002: + return I2C_COM_IF_STRING; + case 0x49050001: + return CSP_COM_IF_STRING; case 0x50000100: return CCSDS_PACKET_DISTRIBUTOR_STRING; case 0x50000200: @@ -186,20 +249,8 @@ const char* translateObject(object_id_t object) { return UDP_BRIDGE_STRING; case 0x50000400: return UDP_POLLING_TASK_STRING; - case 0x51000300: - return PUS_SERVICE_3_STRING; - case 0x51000400: - return PUS_SERVICE_5_STRING; case 0x51000500: return PUS_SERVICE_6_STRING; - case 0x51000800: - return PUS_SERVICE_8_STRING; - case 0x51002300: - return PUS_SERVICE_23_STRING; - case 0x51020100: - return PUS_SERVICE_201_STRING; - case 0x52000002: - return TM_FUNNEL_STRING; case 0x53000000: return FSFW_OBJECTS_START_STRING; case 0x53000001: @@ -240,44 +291,10 @@ const char* translateObject(object_id_t object) { return TIME_STAMPER_STRING; case 0x53ffffff: return FSFW_OBJECTS_END_STRING; - case 0x54000003: - return HEATER_HANDLER_STRING; - case 0x54000004: - return RTD_IC3_STRING; - case 0x54000005: - return RTD_IC4_STRING; - case 0x54000006: - return RTD_IC5_STRING; - case 0x54000007: - return RTD_IC6_STRING; - case 0x54000008: - return RTD_IC7_STRING; - case 0x54000009: - return RTD_IC8_STRING; - case 0x5400000A: - return RTD_IC9_STRING; - case 0x5400000B: - return RTD_IC10_STRING; - case 0x5400000C: - return RTD_IC11_STRING; - case 0x5400000D: - return RTD_IC12_STRING; - case 0x5400000E: - return RTD_IC13_STRING; - case 0x5400000F: - return RTD_IC14_STRING; case 0x54000010: return SPI_TEST_STRING; - case 0x5400001F: - return RTD_IC15_STRING; - case 0x5400002F: - return RTD_IC16_STRING; - case 0x5400003F: - return RTD_IC17_STRING; - case 0x5400004F: - return RTD_IC18_STRING; - case 0x54000050: - return RAD_SENSOR_STRING; + case 0x54000020: + return UART_TEST_STRING; case 0x5400AFFE: return DUMMY_HANDLER_STRING; case 0x5400CAFE: @@ -286,6 +303,10 @@ const char* translateObject(object_id_t object) { return LIBGPIOD_TEST_STRING; case 0x54694269: return TEST_TASK_STRING; + case 0x73000100: + return TM_FUNNEL_STRING; + case 0x73500000: + return CCSDS_IP_CORE_BRIDGE_STRING; case 0xFFFFFFFF: return NO_OBJECT_STRING; default: diff --git a/linux/devices/SusHandler.h b/linux/devices/SusHandler.h index 2312d383..ca9a5c45 100644 --- a/linux/devices/SusHandler.h +++ b/linux/devices/SusHandler.h @@ -4,7 +4,6 @@ #include "devicedefinitions/SusDefinitions.h" #include #include -#include /** * @brief This is the device handler class for the SUS sensor. The sensor is diff --git a/linux/fsfwconfig/OBSWConfig.h.in b/linux/fsfwconfig/OBSWConfig.h.in index b3002cf4..a5a439ab 100644 --- a/linux/fsfwconfig/OBSWConfig.h.in +++ b/linux/fsfwconfig/OBSWConfig.h.in @@ -20,6 +20,7 @@ debugging. */ #define OBSW_PRINT_MISSED_DEADLINES 1 #define OBSW_ADD_TEST_CODE 1 #define OBSW_ADD_TEST_PST 1 +#define OBSW_ADD_GPS 0 #define TEST_LIBGPIOD 0 #define TEST_RADIATION_SENSOR_HANDLER 0 @@ -43,6 +44,7 @@ debugging. */ #define DEBUG_SUS 1 #define DEBUG_RTD 1 #define IMTQ_DEBUG 1 +#define RW_DEBUG 1 // Leave at one as the BSP is linux. Used by the ADIS16507 device handler #define OBSW_ADIS16507_LINUX_COM_IF 1 @@ -50,7 +52,7 @@ debugging. */ #include "OBSWVersion.h" /* Can be used to switch device to NORMAL mode immediately */ -#define OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP 1 +#define OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP 0 #ifdef __cplusplus diff --git a/linux/fsfwconfig/devices/addresses.h b/linux/fsfwconfig/devices/addresses.h index 99fa00ac..9d620475 100644 --- a/linux/fsfwconfig/devices/addresses.h +++ b/linux/fsfwconfig/devices/addresses.h @@ -64,7 +64,11 @@ namespace addresses { RTD_IC15, RTD_IC16, RTD_IC17, - RTD_IC18 + RTD_IC18, + RW1, + RW2, + RW3, + RW4 }; /* Addresses of devices supporting the CSP protocol */ diff --git a/linux/fsfwconfig/devices/gpioIds.h b/linux/fsfwconfig/devices/gpioIds.h index 102b04b9..aad06629 100644 --- a/linux/fsfwconfig/devices/gpioIds.h +++ b/linux/fsfwconfig/devices/gpioIds.h @@ -68,7 +68,21 @@ namespace gpioIds { CS_RAD_SENSOR, PAPB_BUSY_N, - PAPB_EMPTY + PAPB_EMPTY, + + EN_RW1, + EN_RW2, + EN_RW3, + EN_RW4, + + CS_RW1, + CS_RW2, + CS_RW3, + CS_RW4, + + EN_RW_CS, + + SPI_MUX }; } diff --git a/linux/fsfwconfig/events/translateEvents.cpp b/linux/fsfwconfig/events/translateEvents.cpp index c3af08e1..9ae81646 100644 --- a/linux/fsfwconfig/events/translateEvents.cpp +++ b/linux/fsfwconfig/events/translateEvents.cpp @@ -1,7 +1,7 @@ /** - * @brief Auto-generated event translation file. Contains 83 translations. + * @brief Auto-generated event translation file. Contains 92 translations. * @details - * Generated on: 2021-06-08 17:09:32 + * Generated on: 2021-06-29 16:20:09 */ #include "translateEvents.h" @@ -88,6 +88,15 @@ const char *MEMORY_READ_RPT_CRC_FAILURE_STRING = "MEMORY_READ_RPT_CRC_FAILURE"; const char *ACK_FAILURE_STRING = "ACK_FAILURE"; const char *EXE_FAILURE_STRING = "EXE_FAILURE"; const char *CRC_FAILURE_EVENT_STRING = "CRC_FAILURE_EVENT"; +const char *SELF_TEST_I2C_FAILURE_STRING = "SELF_TEST_I2C_FAILURE"; +const char *SELF_TEST_SPI_FAILURE_STRING = "SELF_TEST_SPI_FAILURE"; +const char *SELF_TEST_ADC_FAILURE_STRING = "SELF_TEST_ADC_FAILURE"; +const char *SELF_TEST_PWM_FAILURE_STRING = "SELF_TEST_PWM_FAILURE"; +const char *SELF_TEST_TC_FAILURE_STRING = "SELF_TEST_TC_FAILURE"; +const char *SELF_TEST_MTM_RANGE_FAILURE_STRING = "SELF_TEST_MTM_RANGE_FAILURE"; +const char *SELF_TEST_COIL_CURRENT_FAILURE_STRING = "SELF_TEST_COIL_CURRENT_FAILURE"; +const char *INVALID_ERROR_BYTE_STRING = "INVALID_ERROR_BYTE"; +const char *ERROR_STATE_STRING = "ERROR_STATE"; const char * translateEvents(Event event) { switch( (event & 0xffff) ) { @@ -257,6 +266,24 @@ const char * translateEvents(Event event) { return EXE_FAILURE_STRING; case(11104): return CRC_FAILURE_EVENT_STRING; + case(11201): + return SELF_TEST_I2C_FAILURE_STRING; + case(11202): + return SELF_TEST_SPI_FAILURE_STRING; + case(11203): + return SELF_TEST_ADC_FAILURE_STRING; + case(11204): + return SELF_TEST_PWM_FAILURE_STRING; + case(11205): + return SELF_TEST_TC_FAILURE_STRING; + case(11206): + return SELF_TEST_MTM_RANGE_FAILURE_STRING; + case(11207): + return SELF_TEST_COIL_CURRENT_FAILURE_STRING; + case(11208): + return INVALID_ERROR_BYTE_STRING; + case(11301): + return ERROR_STATE_STRING; default: return "UNKNOWN_EVENT"; } diff --git a/linux/fsfwconfig/objects/translateObjects.cpp b/linux/fsfwconfig/objects/translateObjects.cpp index 47b55435..2068158b 100644 --- a/linux/fsfwconfig/objects/translateObjects.cpp +++ b/linux/fsfwconfig/objects/translateObjects.cpp @@ -1,27 +1,17 @@ -/** +/** * @brief Auto-generated object translation file. * @details - * Contains 93 translations. - * Generated on: 2021-05-18 16:48:46 + * Contains 100 translations. + * Generated on: 2021-06-29 16:19:57 */ #include "translateObjects.h" const char *P60DOCK_TEST_TASK_STRING = "P60DOCK_TEST_TASK"; -const char *P60DOCK_HANDLER_STRING = "P60DOCK_HANDLER"; -const char *PDU1_HANDLER_STRING = "PDU1_HANDLER"; -const char *PDU2_HANDLER_STRING = "PDU2_HANDLER"; -const char *ACU_HANDLER_STRING = "ACU_HANDLER"; -const char *TMP1075_HANDLER_1_STRING = "TMP1075_HANDLER_1"; -const char *TMP1075_HANDLER_2_STRING = "TMP1075_HANDLER_2"; +const char *CORE_CONTROLLER_STRING = "CORE_CONTROLLER"; +const char *ACS_CONTROLLER_STRING = "ACS_CONTROLLER"; +const char *THERMAL_CONTROLLER_STRING = "THERMAL_CONTROLLER"; const char *MGM_0_LIS3_HANDLER_STRING = "MGM_0_LIS3_HANDLER"; -const char *MGM_1_RM3100_HANDLER_STRING = "MGM_1_RM3100_HANDLER"; -const char *MGM_2_LIS3_HANDLER_STRING = "MGM_2_LIS3_HANDLER"; -const char *MGM_3_RM3100_HANDLER_STRING = "MGM_3_RM3100_HANDLER"; const char *GYRO_0_ADIS_HANDLER_STRING = "GYRO_0_ADIS_HANDLER"; -const char *GYRO_1_L3G_HANDLER_STRING = "GYRO_1_L3G_HANDLER"; -const char *GYRO_2_L3G_HANDLER_STRING = "GYRO_2_L3G_HANDLER"; -const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER"; -const char *PLOC_HANDLER_STRING = "PLOC_HANDLER"; const char *SUS_1_STRING = "SUS_1"; const char *SUS_2_STRING = "SUS_2"; const char *SUS_3_STRING = "SUS_3"; @@ -35,26 +25,58 @@ const char *SUS_10_STRING = "SUS_10"; const char *SUS_11_STRING = "SUS_11"; const char *SUS_12_STRING = "SUS_12"; const char *SUS_13_STRING = "SUS_13"; +const char *MGM_1_RM3100_HANDLER_STRING = "MGM_1_RM3100_HANDLER"; +const char *GYRO_1_L3G_HANDLER_STRING = "GYRO_1_L3G_HANDLER"; +const char *MGM_2_LIS3_HANDLER_STRING = "MGM_2_LIS3_HANDLER"; +const char *GYRO_2_ADIS_HANDLER_STRING = "GYRO_2_ADIS_HANDLER"; +const char *MGM_3_RM3100_HANDLER_STRING = "MGM_3_RM3100_HANDLER"; +const char *GYRO_3_L3G_HANDLER_STRING = "GYRO_3_L3G_HANDLER"; +const char *GPS0_HANDLER_STRING = "GPS0_HANDLER"; +const char *GPS1_HANDLER_STRING = "GPS1_HANDLER"; +const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER"; const char *PCDU_HANDLER_STRING = "PCDU_HANDLER"; +const char *RW1_STRING = "RW1"; +const char *RW2_STRING = "RW2"; +const char *RW3_STRING = "RW3"; +const char *RW4_STRING = "RW4"; +const char *P60DOCK_HANDLER_STRING = "P60DOCK_HANDLER"; +const char *PDU1_HANDLER_STRING = "PDU1_HANDLER"; +const char *PDU2_HANDLER_STRING = "PDU2_HANDLER"; +const char *ACU_HANDLER_STRING = "ACU_HANDLER"; +const char *RAD_SENSOR_STRING = "RAD_SENSOR"; +const char *PLOC_HANDLER_STRING = "PLOC_HANDLER"; const char *SOLAR_ARRAY_DEPL_HANDLER_STRING = "SOLAR_ARRAY_DEPL_HANDLER"; +const char *HEATER_HANDLER_STRING = "HEATER_HANDLER"; +const char *TMP1075_HANDLER_1_STRING = "TMP1075_HANDLER_1"; +const char *TMP1075_HANDLER_2_STRING = "TMP1075_HANDLER_2"; +const char *RTD_IC3_STRING = "RTD_IC3"; +const char *RTD_IC4_STRING = "RTD_IC4"; +const char *RTD_IC5_STRING = "RTD_IC5"; +const char *RTD_IC6_STRING = "RTD_IC6"; +const char *RTD_IC7_STRING = "RTD_IC7"; +const char *RTD_IC8_STRING = "RTD_IC8"; +const char *RTD_IC9_STRING = "RTD_IC9"; +const char *RTD_IC10_STRING = "RTD_IC10"; +const char *RTD_IC11_STRING = "RTD_IC11"; +const char *RTD_IC12_STRING = "RTD_IC12"; +const char *RTD_IC13_STRING = "RTD_IC13"; +const char *RTD_IC14_STRING = "RTD_IC14"; +const char *RTD_IC15_STRING = "RTD_IC15"; +const char *RTD_IC16_STRING = "RTD_IC16"; +const char *RTD_IC17_STRING = "RTD_IC17"; +const char *RTD_IC18_STRING = "RTD_IC18"; const char *SYRLINKS_HK_HANDLER_STRING = "SYRLINKS_HK_HANDLER"; -const char *GPIO_IF_STRING = "GPIO_IF"; const char *ARDUINO_COM_IF_STRING = "ARDUINO_COM_IF"; -const char *CSP_COM_IF_STRING = "CSP_COM_IF"; -const char *I2C_COM_IF_STRING = "I2C_COM_IF"; -const char *UART_COM_IF_STRING = "UART_COM_IF"; +const char *GPIO_IF_STRING = "GPIO_IF"; const char *SPI_COM_IF_STRING = "SPI_COM_IF"; +const char *UART_COM_IF_STRING = "UART_COM_IF"; +const char *I2C_COM_IF_STRING = "I2C_COM_IF"; +const char *CSP_COM_IF_STRING = "CSP_COM_IF"; const char *CCSDS_PACKET_DISTRIBUTOR_STRING = "CCSDS_PACKET_DISTRIBUTOR"; const char *PUS_PACKET_DISTRIBUTOR_STRING = "PUS_PACKET_DISTRIBUTOR"; const char *UDP_BRIDGE_STRING = "UDP_BRIDGE"; const char *UDP_POLLING_TASK_STRING = "UDP_POLLING_TASK"; -const char *PUS_SERVICE_3_STRING = "PUS_SERVICE_3"; -const char *PUS_SERVICE_5_STRING = "PUS_SERVICE_5"; const char *PUS_SERVICE_6_STRING = "PUS_SERVICE_6"; -const char *PUS_SERVICE_8_STRING = "PUS_SERVICE_8"; -const char *PUS_SERVICE_23_STRING = "PUS_SERVICE_23"; -const char *PUS_SERVICE_201_STRING = "PUS_SERVICE_201"; -const char *TM_FUNNEL_STRING = "TM_FUNNEL"; const char *FSFW_OBJECTS_START_STRING = "FSFW_OBJECTS_START"; const char *PUS_SERVICE_1_VERIFICATION_STRING = "PUS_SERVICE_1_VERIFICATION"; const char *PUS_SERVICE_2_DEVICE_ACCESS_STRING = "PUS_SERVICE_2_DEVICE_ACCESS"; @@ -75,109 +97,150 @@ const char *TM_STORE_STRING = "TM_STORE"; const char *IPC_STORE_STRING = "IPC_STORE"; const char *TIME_STAMPER_STRING = "TIME_STAMPER"; const char *FSFW_OBJECTS_END_STRING = "FSFW_OBJECTS_END"; -const char *HEATER_HANDLER_STRING = "HEATER_HANDLER"; -const char *RTD_IC3_STRING = "RTD_IC3"; -const char *RTD_IC4_STRING = "RTD_IC4"; -const char *RTD_IC5_STRING = "RTD_IC5"; -const char *RTD_IC6_STRING = "RTD_IC6"; -const char *RTD_IC7_STRING = "RTD_IC7"; -const char *RTD_IC8_STRING = "RTD_IC8"; -const char *RTD_IC9_STRING = "RTD_IC9"; -const char *RTD_IC10_STRING = "RTD_IC10"; -const char *RTD_IC11_STRING = "RTD_IC11"; -const char *RTD_IC12_STRING = "RTD_IC12"; -const char *RTD_IC13_STRING = "RTD_IC13"; -const char *RTD_IC14_STRING = "RTD_IC14"; const char *SPI_TEST_STRING = "SPI_TEST"; -const char *RTD_IC15_STRING = "RTD_IC15"; -const char *RTD_IC16_STRING = "RTD_IC16"; -const char *RTD_IC17_STRING = "RTD_IC17"; -const char *RTD_IC18_STRING = "RTD_IC18"; -const char *RAD_SENSOR_STRING = "RAD_SENSOR"; +const char *UART_TEST_STRING = "UART_TEST"; const char *DUMMY_HANDLER_STRING = "DUMMY_HANDLER"; const char *DUMMY_INTERFACE_STRING = "DUMMY_INTERFACE"; const char *LIBGPIOD_TEST_STRING = "LIBGPIOD_TEST"; const char *TEST_TASK_STRING = "TEST_TASK"; +const char *TM_FUNNEL_STRING = "TM_FUNNEL"; +const char *CCSDS_IP_CORE_BRIDGE_STRING = "CCSDS_IP_CORE_BRIDGE"; const char *NO_OBJECT_STRING = "NO_OBJECT"; const char* translateObject(object_id_t object) { switch( (object & 0xFFFFFFFF) ) { case 0x00005060: return P60DOCK_TEST_TASK_STRING; - case 0x44000001: - return P60DOCK_HANDLER_STRING; - case 0x44000002: - return PDU1_HANDLER_STRING; - case 0x44000003: - return PDU2_HANDLER_STRING; - case 0x44000004: - return ACU_HANDLER_STRING; - case 0x44000005: - return TMP1075_HANDLER_1_STRING; - case 0x44000006: - return TMP1075_HANDLER_2_STRING; - case 0x44000007: + case 0x43000003: + return CORE_CONTROLLER_STRING; + case 0x43100002: + return ACS_CONTROLLER_STRING; + case 0x43400001: + return THERMAL_CONTROLLER_STRING; + case 0x44120006: return MGM_0_LIS3_HANDLER_STRING; - case 0x44000008: - return MGM_1_RM3100_HANDLER_STRING; - case 0x44000009: - return MGM_2_LIS3_HANDLER_STRING; - case 0x44000010: - return MGM_3_RM3100_HANDLER_STRING; - case 0x44000011: + case 0x44120010: return GYRO_0_ADIS_HANDLER_STRING; - case 0x44000012: - return GYRO_1_L3G_HANDLER_STRING; - case 0x44000013: - return GYRO_2_L3G_HANDLER_STRING; - case 0x44000014: - return IMTQ_HANDLER_STRING; - case 0x44000015: - return PLOC_HANDLER_STRING; - case 0x44000016: + case 0x44120032: return SUS_1_STRING; - case 0x44000017: + case 0x44120033: return SUS_2_STRING; - case 0x44000018: + case 0x44120034: return SUS_3_STRING; - case 0x44000019: + case 0x44120035: return SUS_4_STRING; - case 0x4400001A: + case 0x44120036: return SUS_5_STRING; - case 0x4400001B: + case 0x44120037: return SUS_6_STRING; - case 0x4400001C: + case 0x44120038: return SUS_7_STRING; - case 0x4400001D: + case 0x44120039: return SUS_8_STRING; - case 0x4400001E: + case 0x44120040: return SUS_9_STRING; - case 0x4400001F: + case 0x44120041: return SUS_10_STRING; - case 0x44000021: + case 0x44120042: return SUS_11_STRING; - case 0x44000022: + case 0x44120043: return SUS_12_STRING; - case 0x44000023: + case 0x44120044: return SUS_13_STRING; - case 0x44001000: + case 0x44120107: + return MGM_1_RM3100_HANDLER_STRING; + case 0x44120111: + return GYRO_1_L3G_HANDLER_STRING; + case 0x44120208: + return MGM_2_LIS3_HANDLER_STRING; + case 0x44120212: + return GYRO_2_ADIS_HANDLER_STRING; + case 0x44120309: + return MGM_3_RM3100_HANDLER_STRING; + case 0x44120313: + return GYRO_3_L3G_HANDLER_STRING; + case 0x44130045: + return GPS0_HANDLER_STRING; + case 0x44130146: + return GPS1_HANDLER_STRING; + case 0x44140014: + return IMTQ_HANDLER_STRING; + case 0x442000A1: return PCDU_HANDLER_STRING; - case 0x44001001: + case 0x44210001: + return RW1_STRING; + case 0x44210002: + return RW2_STRING; + case 0x44210003: + return RW3_STRING; + case 0x44210004: + return RW4_STRING; + case 0x44250000: + return P60DOCK_HANDLER_STRING; + case 0x44250001: + return PDU1_HANDLER_STRING; + case 0x44250002: + return PDU2_HANDLER_STRING; + case 0x44250003: + return ACU_HANDLER_STRING; + case 0x443200A5: + return RAD_SENSOR_STRING; + case 0x44330015: + return PLOC_HANDLER_STRING; + case 0x444100A2: return SOLAR_ARRAY_DEPL_HANDLER_STRING; - case 0x44001002: + case 0x444100A4: + return HEATER_HANDLER_STRING; + case 0x44420004: + return TMP1075_HANDLER_1_STRING; + case 0x44420005: + return TMP1075_HANDLER_2_STRING; + case 0x44420016: + return RTD_IC3_STRING; + case 0x44420017: + return RTD_IC4_STRING; + case 0x44420018: + return RTD_IC5_STRING; + case 0x44420019: + return RTD_IC6_STRING; + case 0x44420020: + return RTD_IC7_STRING; + case 0x44420021: + return RTD_IC8_STRING; + case 0x44420022: + return RTD_IC9_STRING; + case 0x44420023: + return RTD_IC10_STRING; + case 0x44420024: + return RTD_IC11_STRING; + case 0x44420025: + return RTD_IC12_STRING; + case 0x44420026: + return RTD_IC13_STRING; + case 0x44420027: + return RTD_IC14_STRING; + case 0x44420028: + return RTD_IC15_STRING; + case 0x44420029: + return RTD_IC16_STRING; + case 0x44420030: + return RTD_IC17_STRING; + case 0x44420031: + return RTD_IC18_STRING; + case 0x445300A3: return SYRLINKS_HK_HANDLER_STRING; - case 0x47000001: - return GPIO_IF_STRING; - case 0x49000001: + case 0x49000000: return ARDUINO_COM_IF_STRING; - case 0x49000002: - return CSP_COM_IF_STRING; - case 0x49000003: - return I2C_COM_IF_STRING; - case 0x49000004: - return UART_COM_IF_STRING; - case 0x49000005: + case 0x49010005: + return GPIO_IF_STRING; + case 0x49020004: return SPI_COM_IF_STRING; + case 0x49030003: + return UART_COM_IF_STRING; + case 0x49040002: + return I2C_COM_IF_STRING; + case 0x49050001: + return CSP_COM_IF_STRING; case 0x50000100: return CCSDS_PACKET_DISTRIBUTOR_STRING; case 0x50000200: @@ -186,20 +249,8 @@ const char* translateObject(object_id_t object) { return UDP_BRIDGE_STRING; case 0x50000400: return UDP_POLLING_TASK_STRING; - case 0x51000300: - return PUS_SERVICE_3_STRING; - case 0x51000400: - return PUS_SERVICE_5_STRING; case 0x51000500: return PUS_SERVICE_6_STRING; - case 0x51000800: - return PUS_SERVICE_8_STRING; - case 0x51002300: - return PUS_SERVICE_23_STRING; - case 0x51020100: - return PUS_SERVICE_201_STRING; - case 0x52000002: - return TM_FUNNEL_STRING; case 0x53000000: return FSFW_OBJECTS_START_STRING; case 0x53000001: @@ -240,44 +291,10 @@ const char* translateObject(object_id_t object) { return TIME_STAMPER_STRING; case 0x53ffffff: return FSFW_OBJECTS_END_STRING; - case 0x54000003: - return HEATER_HANDLER_STRING; - case 0x54000004: - return RTD_IC3_STRING; - case 0x54000005: - return RTD_IC4_STRING; - case 0x54000006: - return RTD_IC5_STRING; - case 0x54000007: - return RTD_IC6_STRING; - case 0x54000008: - return RTD_IC7_STRING; - case 0x54000009: - return RTD_IC8_STRING; - case 0x5400000A: - return RTD_IC9_STRING; - case 0x5400000B: - return RTD_IC10_STRING; - case 0x5400000C: - return RTD_IC11_STRING; - case 0x5400000D: - return RTD_IC12_STRING; - case 0x5400000E: - return RTD_IC13_STRING; - case 0x5400000F: - return RTD_IC14_STRING; case 0x54000010: return SPI_TEST_STRING; - case 0x5400001F: - return RTD_IC15_STRING; - case 0x5400002F: - return RTD_IC16_STRING; - case 0x5400003F: - return RTD_IC17_STRING; - case 0x5400004F: - return RTD_IC18_STRING; - case 0x54000050: - return RAD_SENSOR_STRING; + case 0x54000020: + return UART_TEST_STRING; case 0x5400AFFE: return DUMMY_HANDLER_STRING; case 0x5400CAFE: @@ -286,6 +303,10 @@ const char* translateObject(object_id_t object) { return LIBGPIOD_TEST_STRING; case 0x54694269: return TEST_TASK_STRING; + case 0x73000100: + return TM_FUNNEL_STRING; + case 0x73500000: + return CCSDS_IP_CORE_BRIDGE_STRING; case 0xFFFFFFFF: return NO_OBJECT_STRING; default: diff --git a/linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp b/linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp index 4e9b2b7b..a213ca06 100644 --- a/linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp +++ b/linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp @@ -18,16 +18,6 @@ ReturnValue_t pst::pstGpio(FixedTimeslotTaskIF *thisSequence) thisSequence->addSlot(objects::SOLAR_ARRAY_DEPL_HANDLER, length * 0, DeviceHandlerIF::PERFORM_OPERATION); - // Radiation sensor - // thisSequence->addSlot(objects::RAD_SENSOR, length * 0, DeviceHandlerIF::PERFORM_OPERATION); - // thisSequence->addSlot(objects::RAD_SENSOR, length * 0.2, DeviceHandlerIF::SEND_WRITE); - // thisSequence->addSlot(objects::RAD_SENSOR, length * 0.4, DeviceHandlerIF::GET_WRITE); - // thisSequence->addSlot(objects::RAD_SENSOR, length * 0.6, DeviceHandlerIF::SEND_READ); - // thisSequence->addSlot(objects::RAD_SENSOR, length * 0.8, DeviceHandlerIF::GET_READ); - // if (length != 3000) { - // sif::warning << "pollingSequenceInitDefault: Frequency changed. Make sure timing critical " - // << "SUS sensors still produce correct values" << std::endl; - // } if (thisSequence->checkSequence() == HasReturnvaluesIF::RETURN_OK) { return HasReturnvaluesIF::RETURN_OK; } @@ -145,6 +135,14 @@ ReturnValue_t pst::pstSpi(FixedTimeslotTaskIF *thisSequence) { thisSequence->addSlot(objects::RTD_IC17, length * 0.8, DeviceHandlerIF::GET_READ); thisSequence->addSlot(objects::RTD_IC18, length * 0.8, DeviceHandlerIF::GET_READ); #endif /* Q7S_ADD_RTD_DEVICES */ + + /* Radiation sensor */ + thisSequence->addSlot(objects::RAD_SENSOR, length * 0, DeviceHandlerIF::PERFORM_OPERATION); + thisSequence->addSlot(objects::RAD_SENSOR, length * 0.2, DeviceHandlerIF::SEND_WRITE); + thisSequence->addSlot(objects::RAD_SENSOR, length * 0.4, DeviceHandlerIF::GET_WRITE); + thisSequence->addSlot(objects::RAD_SENSOR, length * 0.6, DeviceHandlerIF::SEND_READ); + thisSequence->addSlot(objects::RAD_SENSOR, length * 0.8, DeviceHandlerIF::GET_READ); + /** * The sun sensor will be shutdown as soon as the chip select is pulled high. Thus all * requests to a sun sensor must be performed consecutively. Another reason for calling multiple @@ -401,6 +399,30 @@ ReturnValue_t pst::pstSpi(FixedTimeslotTaskIF *thisSequence) { // thisSequence->addSlot(objects::SUS_13, length * 0.938, DeviceHandlerIF::SEND_READ); // thisSequence->addSlot(objects::SUS_13, length * 0.938, DeviceHandlerIF::GET_READ); + thisSequence->addSlot(objects::RW1, length * 0, DeviceHandlerIF::PERFORM_OPERATION); + thisSequence->addSlot(objects::RW1, length * 0.2, DeviceHandlerIF::SEND_WRITE); + thisSequence->addSlot(objects::RW1, length * 0.4, DeviceHandlerIF::GET_WRITE); + thisSequence->addSlot(objects::RW1, length * 0.6, DeviceHandlerIF::SEND_READ); + thisSequence->addSlot(objects::RW1, length * 0.8, DeviceHandlerIF::GET_READ); + + thisSequence->addSlot(objects::RW2, length * 0, DeviceHandlerIF::PERFORM_OPERATION); + thisSequence->addSlot(objects::RW2, length * 0.2, DeviceHandlerIF::SEND_WRITE); + thisSequence->addSlot(objects::RW2, length * 0.4, DeviceHandlerIF::GET_WRITE); + thisSequence->addSlot(objects::RW2, length * 0.6, DeviceHandlerIF::SEND_READ); + thisSequence->addSlot(objects::RW2, length * 0.8, DeviceHandlerIF::GET_READ); + + thisSequence->addSlot(objects::RW3, length * 0, DeviceHandlerIF::PERFORM_OPERATION); + thisSequence->addSlot(objects::RW3, length * 0.2, DeviceHandlerIF::SEND_WRITE); + thisSequence->addSlot(objects::RW3, length * 0.4, DeviceHandlerIF::GET_WRITE); + thisSequence->addSlot(objects::RW3, length * 0.6, DeviceHandlerIF::SEND_READ); + thisSequence->addSlot(objects::RW3, length * 0.8, DeviceHandlerIF::GET_READ); + + thisSequence->addSlot(objects::RW4, length * 0, DeviceHandlerIF::PERFORM_OPERATION); + thisSequence->addSlot(objects::RW4, length * 0.2, DeviceHandlerIF::SEND_WRITE); + thisSequence->addSlot(objects::RW4, length * 0.4, DeviceHandlerIF::GET_WRITE); + thisSequence->addSlot(objects::RW4, length * 0.6, DeviceHandlerIF::SEND_READ); + thisSequence->addSlot(objects::RW4, length * 0.8, DeviceHandlerIF::GET_READ); + if (thisSequence->checkSequence() != HasReturnvaluesIF::RETURN_OK) { sif::error << "SPI PST initialization failed" << std::endl; return HasReturnvaluesIF::RETURN_FAILED; @@ -426,6 +448,7 @@ ReturnValue_t pst::pstI2c(FixedTimeslotTaskIF *thisSequence) { ReturnValue_t pst::pstUart(FixedTimeslotTaskIF *thisSequence) { // Length of a communication cycle uint32_t length = thisSequence->getPeriodMs(); + thisSequence->addSlot(objects::PLOC_HANDLER, length * 0, DeviceHandlerIF::PERFORM_OPERATION); thisSequence->addSlot(objects::SYRLINKS_HK_HANDLER, length * 0, diff --git a/mission/devices/CMakeLists.txt b/mission/devices/CMakeLists.txt index 8eb96538..78d54185 100644 --- a/mission/devices/CMakeLists.txt +++ b/mission/devices/CMakeLists.txt @@ -15,6 +15,7 @@ target_sources(${TARGET_NAME} PUBLIC PlocHandler.cpp RadiationSensorHandler.cpp GyroADIS16507Handler.cpp + RwHandler.cpp ) diff --git a/mission/devices/RadiationSensorHandler.cpp b/mission/devices/RadiationSensorHandler.cpp index bd16ddaf..65a877b6 100644 --- a/mission/devices/RadiationSensorHandler.cpp +++ b/mission/devices/RadiationSensorHandler.cpp @@ -44,7 +44,7 @@ ReturnValue_t RadiationSensorHandler::buildNormalDeviceCommand( break; } default: { - sif::debug << "RadiationSensorHandler::buildNormalDeviceCommand: Unknwon communication " + sif::debug << "RadiationSensorHandler::buildNormalDeviceCommand: Unknown communication " << "step" << std::endl; return HasReturnvaluesIF::RETURN_OK; } diff --git a/mission/devices/RwHandler.cpp b/mission/devices/RwHandler.cpp new file mode 100644 index 00000000..beb17602 --- /dev/null +++ b/mission/devices/RwHandler.cpp @@ -0,0 +1,514 @@ +#include "RwHandler.h" +#include "OBSWConfig.h" + +#include +#include + +RwHandler::RwHandler(object_id_t objectId, object_id_t comIF, CookieIF * comCookie, + LinuxLibgpioIF* gpioComIF, gpioId_t enableGpio) : + DeviceHandlerBase(objectId, comIF, comCookie), gpioComIF(gpioComIF), enableGpio(enableGpio), + temperatureSet(this), statusSet(this), lastResetStatusSet(this), tmDataset(this) { + if (comCookie == NULL) { + sif::error << "RwHandler: Invalid com cookie" << std::endl; + } + if (gpioComIF == NULL) { + sif::error << "RwHandler: Invalid gpio communication interface" << std::endl; + } +} + +RwHandler::~RwHandler() { +} + +void RwHandler::doStartUp() { + + internalState = InternalState::GET_RESET_STATUS; + + if(gpioComIF->pullHigh(enableGpio) != RETURN_OK) { + sif::debug << "RwHandler::doStartUp: Failed to pull enable gpio to high"; + } + +#if OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP == 1 + setMode(MODE_NORMAL); +#else + setMode(_MODE_TO_ON); +#endif +} + +void RwHandler::doShutDown() { + if(gpioComIF->pullLow(enableGpio) != RETURN_OK) { + sif::debug << "RwHandler::doStartUp: Failed to pull enable gpio to low"; + } +} + +ReturnValue_t RwHandler::buildNormalDeviceCommand(DeviceCommandId_t * id) { + switch (internalState) { + case InternalState::GET_RESET_STATUS: + *id = RwDefinitions::GET_LAST_RESET_STATUS; + internalState = InternalState::READ_TEMPERATURE; + break; + case InternalState::CLEAR_RESET_STATUS: + *id = RwDefinitions::CLEAR_LAST_RESET_STATUS; + /** After reset status is cleared, reset status will be polled again for verification */ + internalState = InternalState::GET_RESET_STATUS; + break; + case InternalState::READ_TEMPERATURE: + *id = RwDefinitions::GET_TEMPERATURE; + internalState = InternalState::GET_RW_SATUS; + break; + case InternalState::GET_RW_SATUS: + *id = RwDefinitions::GET_RW_STATUS; + internalState = InternalState::GET_RESET_STATUS; + break; + default: + sif::debug << "RwHandler::buildNormalDeviceCommand: Invalid communication step" + << std::endl; + break; + } + return buildCommandFromCommand(*id, NULL, 0); +} + +ReturnValue_t RwHandler::buildTransitionDeviceCommand(DeviceCommandId_t * id) { + return NOTHING_TO_SEND; +} + +ReturnValue_t RwHandler::buildCommandFromCommand(DeviceCommandId_t deviceCommand, + const uint8_t * commandData, size_t commandDataLen) { + ReturnValue_t result = RETURN_OK; + + switch (deviceCommand) { + case (RwDefinitions::RESET_MCU): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + case (RwDefinitions::GET_LAST_RESET_STATUS): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + case (RwDefinitions::CLEAR_LAST_RESET_STATUS): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + case (RwDefinitions::GET_RW_STATUS): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + case (RwDefinitions::INIT_RW_CONTROLLER): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + case (RwDefinitions::SET_SPEED): { + if (commandDataLen != 6) { + sif::error << "RwHandler::buildCommandFromCommand: Received set speed command with" + << " invalid length" << std::endl; + return SET_SPEED_COMMAND_INVALID_LENGTH; + } + result = checkSpeedAndRampTime(commandData, commandDataLen); + if (result != RETURN_OK) { + return result; + } + prepareSetSpeedCmd(commandData, commandDataLen); + return result; + } + case (RwDefinitions::GET_TEMPERATURE): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + case (RwDefinitions::GET_TM): { + prepareSimpleCommand(deviceCommand); + return RETURN_OK; + } + default: + return DeviceHandlerIF::COMMAND_NOT_IMPLEMENTED; + } + return HasReturnvaluesIF::RETURN_FAILED; +} + +void RwHandler::fillCommandAndReplyMap() { + this->insertInCommandMap(RwDefinitions::RESET_MCU); + this->insertInCommandAndReplyMap(RwDefinitions::GET_LAST_RESET_STATUS, 1, &lastResetStatusSet, + RwDefinitions::SIZE_GET_RESET_STATUS); + this->insertInCommandAndReplyMap(RwDefinitions::CLEAR_LAST_RESET_STATUS, 1, nullptr, + RwDefinitions::SIZE_CLEAR_RESET_STATUS); + this->insertInCommandAndReplyMap(RwDefinitions::GET_RW_STATUS, 1, &statusSet, + RwDefinitions::SIZE_GET_RW_STATUS); + this->insertInCommandAndReplyMap(RwDefinitions::INIT_RW_CONTROLLER, 1, nullptr, + RwDefinitions::SIZE_INIT_RW); + this->insertInCommandAndReplyMap(RwDefinitions::GET_TEMPERATURE, 1, &temperatureSet, + RwDefinitions::SIZE_GET_TEMPERATURE_REPLY); + this->insertInCommandAndReplyMap(RwDefinitions::SET_SPEED, 1, nullptr, + RwDefinitions::SIZE_SET_SPEED_REPLY); + this->insertInCommandAndReplyMap(RwDefinitions::GET_TM, 1, &tmDataset, + RwDefinitions::SIZE_GET_TELEMETRY_REPLY); +} + +ReturnValue_t RwHandler::scanForReply(const uint8_t *start, size_t remainingSize, + DeviceCommandId_t *foundId, size_t *foundLen) { + + switch (*(start)) { + case (static_cast(RwDefinitions::GET_LAST_RESET_STATUS)): { + *foundLen = RwDefinitions::SIZE_GET_RESET_STATUS; + *foundId = RwDefinitions::GET_LAST_RESET_STATUS; + break; + } + case (static_cast(RwDefinitions::CLEAR_LAST_RESET_STATUS)): { + *foundLen = RwDefinitions::SIZE_CLEAR_RESET_STATUS; + *foundId = RwDefinitions::CLEAR_LAST_RESET_STATUS; + break; + } + case (static_cast(RwDefinitions::GET_RW_STATUS)): { + *foundLen = RwDefinitions::SIZE_GET_RW_STATUS; + *foundId = RwDefinitions::GET_RW_STATUS; + break; + } + case (static_cast(RwDefinitions::INIT_RW_CONTROLLER)): { + *foundLen = RwDefinitions::SIZE_INIT_RW; + *foundId = RwDefinitions::INIT_RW_CONTROLLER; + break; + } + case (static_cast(RwDefinitions::SET_SPEED)): { + *foundLen = RwDefinitions::SIZE_SET_SPEED_REPLY; + *foundId = RwDefinitions::SET_SPEED; + break; + } + case (static_cast(RwDefinitions::GET_TEMPERATURE)): { + *foundLen = RwDefinitions::SIZE_GET_TEMPERATURE_REPLY; + *foundId = RwDefinitions::GET_TEMPERATURE; + break; + } + case (static_cast(RwDefinitions::GET_TM)): { +// *foundLen = RwDefinitions::SIZE_GET_TELEMETRY_REPLY; + *foundLen = 91; + *foundId = RwDefinitions::GET_TM; + break; + } + default: { + sif::debug << "RwHandler::scanForReply: Reply contains invalid command code" << std::endl; + return RETURN_FAILED; + break; + } + } + + sizeOfReply = *foundLen; + + return RETURN_OK; +} + +ReturnValue_t RwHandler::interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) { + + /** Check result code */ + if (*(packet + 1) == RwDefinitions::ERROR) { + sif::error << "RwHandler::interpretDeviceReply: Command execution failed. Command id: " + << id << std::endl; + return EXECUTION_FAILED; + } + + /** Received in little endian byte order */ + uint16_t replyCrc = *(packet + sizeOfReply - 1) << 8 | *(packet + sizeOfReply - 2) ; + + if (CRC::crc16ccitt(packet, sizeOfReply - 2, 0xFFFF) != replyCrc) { + sif::error << "RwHandler::interpretDeviceReply: cRC error" << std::endl; + return CRC_ERROR; + } + + switch (id) { + case (RwDefinitions::GET_LAST_RESET_STATUS): { + handleResetStatusReply(packet); + break; + } + case (RwDefinitions::GET_RW_STATUS): { + handleGetRwStatusReply(packet); + break; + } + case (RwDefinitions::CLEAR_LAST_RESET_STATUS): + case (RwDefinitions::INIT_RW_CONTROLLER): + case (RwDefinitions::SET_SPEED): + // no reply data expected + break; + case (RwDefinitions::GET_TEMPERATURE): { + handleTemperatureReply(packet); + break; + } + case (RwDefinitions::GET_TM): { + handleGetTelemetryReply(packet); + break; + } + default: { + sif::debug << "RwHandler::interpretDeviceReply: Unknown device reply id" << std::endl; + return DeviceHandlerIF::UNKNOWN_DEVICE_REPLY; + } + } + + return RETURN_OK; +} + +void RwHandler::setNormalDatapoolEntriesInvalid() { + +} + +uint32_t RwHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { + return 5000; +} + +ReturnValue_t RwHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap, + LocalDataPoolManager& poolManager) { + + localDataPoolMap.emplace(RwDefinitions::TEMPERATURE_C, new PoolEntry( { 0 })); + + localDataPoolMap.emplace(RwDefinitions::CURR_SPEED, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::REFERENCE_SPEED, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::STATE, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::CLC_MODE, new PoolEntry( { 0 })); + + localDataPoolMap.emplace(RwDefinitions::LAST_RESET_STATUS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::CURRRENT_RESET_STATUS, new PoolEntry( { 0 })); + + localDataPoolMap.emplace(RwDefinitions::TM_LAST_RESET_STATUS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::TM_MCU_TEMPERATURE, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::TM_RW_STATE, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::TM_CLC_MODE, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::TM_RW_CURR_SPEED, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::TM_RW_REF_SPEED, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::INVALID_CRC_PACKETS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::INVALID_LEN_PACKETS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::INVALID_CMD_PACKETS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::EXECUTED_REPLIES, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::COMMAND_REPLIES, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_BYTES_WRITTEN, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_BYTES_READ, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_PARITY_ERRORS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_NOISE_ERRORS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_FRAME_ERRORS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_REG_OVERRUN_ERRORS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::UART_TOTAL_ERRORS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::SPI_BYTES_WRITTEN, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::SPI_BYTES_READ, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::SPI_REG_OVERRUN_ERRORS, new PoolEntry( { 0 })); + localDataPoolMap.emplace(RwDefinitions::SPI_TOTAL_ERRORS, new PoolEntry( { 0 })); + + return RETURN_OK; +} + +void RwHandler::prepareSimpleCommand(DeviceCommandId_t id) { + commandBuffer[0] = static_cast(id); + uint16_t crc = CRC::crc16ccitt(commandBuffer, 1, 0xFFFF); + commandBuffer[1] = static_cast(crc & 0xFF); + commandBuffer[2] = static_cast(crc >> 8 & 0xFF); + rawPacket = commandBuffer; + rawPacketLen = 3; +} + +ReturnValue_t RwHandler::checkSpeedAndRampTime(const uint8_t* commandData, size_t commandDataLen) { + int32_t speed = *commandData << 24 | *(commandData + 1) << 16 | *(commandData + 2) << 8 + | *(commandData + 3); + + if ((speed < -65000 || speed > 65000 || (speed > -1000 && speed < 1000)) && (speed != 0)) { + sif::error << "RwHandler::checkSpeedAndRampTime: Command has invalid speed" << std::endl; + return INVALID_SPEED; + } + + uint16_t rampTime = *(commandData + 4) << 8 | *(commandData + 5); + + if (rampTime < 10 || rampTime > 10000) { + sif::error << "RwHandler::checkSpeedAndRampTime: Command has invalid ramp time" + << std::endl; + return INVALID_RAMP_TIME; + } + + return RETURN_OK; +} + +void RwHandler::prepareSetSpeedCmd(const uint8_t * commandData, size_t commandDataLen) { + commandBuffer[0] = static_cast(RwDefinitions::SET_SPEED); + + /** Speed (0.1 RPM) */ + commandBuffer[1] = *(commandData + 3); + commandBuffer[2] = *(commandData + 2); + commandBuffer[3] = *(commandData + 1); + commandBuffer[4] = *commandData; + /** Ramp time (ms) */ + commandBuffer[5] = *(commandData + 5); + commandBuffer[6] = *(commandData + 4); + + uint16_t crc = CRC::crc16ccitt(commandBuffer, 7, 0xFFFF); + commandBuffer[7] = static_cast(crc & 0xFF); + commandBuffer[8] = static_cast(crc >> 8 & 0xFF); + rawPacket = commandBuffer; + rawPacketLen = 9; +} + +void RwHandler::handleResetStatusReply(const uint8_t* packet) { + PoolReadGuard rg(&lastResetStatusSet); + uint8_t offset = 2; + uint8_t resetStatus = *(packet + offset); + if (resetStatus != RwDefinitions::CLEARED) { + internalState = InternalState::CLEAR_RESET_STATUS; + lastResetStatusSet.lastResetStatus = resetStatus; + } + lastResetStatusSet.currentResetStatus = resetStatus; +#if OBSW_VERBOSE_LEVEL >= 1 && RW_DEBUG == 1 + sif::info << "RwHandler::handleResetStatusReply: Last reset status: " + << static_cast(lastResetStatusSet.lastResetStatus.value) << std::endl; + sif::info << "RwHandler::handleResetStatusReply: Current reset status: " + << static_cast(lastResetStatusSet.currentResetStatus.value) << std::endl; +#endif +} + +void RwHandler::handleGetRwStatusReply(const uint8_t* packet) { + PoolReadGuard rg(&statusSet); + uint8_t offset = 2; + statusSet.currSpeed = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + statusSet.referenceSpeed = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + statusSet.state = *(packet + offset); + offset += 1; + statusSet.clcMode = *(packet + offset); + + if (statusSet.state == RwDefinitions::ERROR) { + /** + * This requires the commanding of the init reaction wheel controller command to recover + * form error state which must be handled by the FDIR instance. + */ + triggerEvent(ERROR_STATE); + sif::error << "RwHandler::handleGetRwStatusReply: Reaction wheel in error state" + << std::endl; + } + +#if OBSW_VERBOSE_LEVEL >= 1 && RW_DEBUG == 1 + sif::info << "RwHandler::handleGetRwStatusReply: Current speed is: " << statusSet.currSpeed + << " * 0.1 RPM" << std::endl; + sif::info << "RwHandler::handleGetRwStatusReply: Reference speed is: " + << statusSet.referenceSpeed << " * 0.1 RPM" << std::endl; + sif::info << "RwHandler::handleGetRwStatusReply: State is: " + << (unsigned int) statusSet.state.value << std::endl; + sif::info << "RwHandler::handleGetRwStatusReply: clc mode is: " + << (unsigned int) statusSet.clcMode.value << std::endl; +#endif +} + +void RwHandler::handleTemperatureReply(const uint8_t* packet) { + PoolReadGuard rg(&temperatureSet); + uint8_t offset = 2; + temperatureSet.temperatureCelcius = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); +#if OBSW_VERBOSE_LEVEL >= 1 && RW_DEBUG == 1 + sif::info << "RwHandler::handleTemperatureReply: Temperature: " + << temperatureSet.temperatureCelcius << " °C" << std::endl; +#endif +} + +void RwHandler::handleGetTelemetryReply(const uint8_t* packet) { + PoolReadGuard rg(&tmDataset); + uint8_t offset = 2; + tmDataset.lastResetStatus = *(packet + offset); + offset += 1; + tmDataset.mcuTemperature = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + offset += 8; + tmDataset.rwState = *(packet + offset); + offset += 1; + tmDataset.rwClcMode = *(packet + offset); + offset += 1; + tmDataset.rwCurrSpeed = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.rwRefSpeed = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.numOfInvalidCrcPackets = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.numOfInvalidLenPackets = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.numOfInvalidCmdPackets = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.numOfCmdExecutedReplies = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.numOfCmdReplies = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartNumOfBytesWritten = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartNumOfBytesRead = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartNumOfParityErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartNumOfNoiseErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartNumOfFrameErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartNumOfRegisterOverrunErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.uartTotalNumOfErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.spiNumOfBytesWritten = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.spiNumOfBytesRead = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.spiNumOfRegisterOverrunErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); + offset += 4; + tmDataset.spiTotalNumOfErrors = *(packet + offset + 3) << 24 | *(packet + offset + 2) << 16 + | *(packet + offset + 1) << 8 | *(packet + offset); +#if OBSW_VERBOSE_LEVEL >= 1 && RW_DEBUG == 1 + sif::info << "RwHandler::handleTemperatureReply: Last reset status: " + << static_cast(tmDataset.lastResetStatus.value) << std::endl; + sif::info << "RwHandler::handleTemperatureReply: MCU temperature: " << tmDataset.mcuTemperature + << std::endl; + sif::info << "RwHandler::handleTemperatureReply: State: " + << static_cast(tmDataset.rwState.value) << std::endl; + sif::info << "RwHandler::handleTemperatureReply: CLC mode: " + << static_cast(tmDataset.rwClcMode.value) << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Current speed: " << tmDataset.rwCurrSpeed + << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Reference speed: " << tmDataset.rwRefSpeed + << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Number of invalid CRC packets: " + << tmDataset.numOfInvalidCrcPackets << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Number of invalid length packets: " + << tmDataset.numOfInvalidLenPackets << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Number of invalid command packets: " + << tmDataset.numOfInvalidCmdPackets << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Number of command executed replies: " + << tmDataset.numOfCmdExecutedReplies << std::endl; + sif::info << "RwHandler::handleTemperatureReply: Number of command replies: " + << tmDataset.numOfCmdReplies << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of bytes written: " + << tmDataset.uartNumOfBytesWritten << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of bytes read: " + << tmDataset.uartNumOfBytesRead << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of parity errors: " + << tmDataset.uartNumOfParityErrors << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of noise errors: " + << tmDataset.uartNumOfNoiseErrors << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of frame errors: " + << tmDataset.uartNumOfFrameErrors << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of register overrun errors: " + << tmDataset.uartNumOfRegisterOverrunErrors << std::endl; + sif::info << "RwHandler::handleTemperatureReply: UART number of total errors: " + << tmDataset.uartTotalNumOfErrors << std::endl; + sif::info << "RwHandler::handleTemperatureReply: SPI number of bytes written: " + << tmDataset.spiNumOfBytesWritten << std::endl; + sif::info << "RwHandler::handleTemperatureReply: SPI number of bytes read: " + << tmDataset.spiNumOfBytesRead << std::endl; + sif::info << "RwHandler::handleTemperatureReply: SPI number of register overrun errors: " + << tmDataset.spiNumOfRegisterOverrunErrors << std::endl; + sif::info << "RwHandler::handleTemperatureReply: SPI number of register total errors: " + << tmDataset.spiTotalNumOfErrors << std::endl; +#endif +} diff --git a/mission/devices/RwHandler.h b/mission/devices/RwHandler.h new file mode 100644 index 00000000..cd753be0 --- /dev/null +++ b/mission/devices/RwHandler.h @@ -0,0 +1,154 @@ +#ifndef MISSION_DEVICES_RWHANDLER_H_ +#define MISSION_DEVICES_RWHANDLER_H_ + +#include +#include +#include +#include + +/** + * @brief This is the device handler for the reaction wheel from nano avionics. + * + * @details Datasheet: https://eive-cloud.irs.uni-stuttgart.de/index.php/apps/files/?dir=/EIVE_IRS/ + * Arbeitsdaten/08_Used%20Components/Nanoavionics_Reactionwheels&fileid=181622 + * + * @note Values are transferred in little endian format. + * + * @author J. Meier + */ +class RwHandler: public DeviceHandlerBase { +public: + + /** + * @brief Constructor + * + * @param objectId + * @param comIF + * @param comCookie + * @param gpioComIF Pointer to gpio communication interface + * @param enablePin GPIO connected to the enable pin of the reaction wheels. Must be pulled + * to high to enable the device. + */ + RwHandler(object_id_t objectId, object_id_t comIF, CookieIF * comCookie, + LinuxLibgpioIF* gpioComIF, gpioId_t enableGpio); + virtual ~RwHandler(); + + static const uint8_t INTERFACE_ID = CLASS_ID::RW_HANDLER; + + static const ReturnValue_t SPI_WRITE_FAILURE = MAKE_RETURN_CODE(0xB0); + //! [EXPORT] : [COMMENT] Used by the spi send function to tell a failing read call + static const ReturnValue_t SPI_READ_FAILURE = MAKE_RETURN_CODE(0xB1); + //! [EXPORT] : [COMMENT] Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E + static const ReturnValue_t MISSING_START_SIGN = MAKE_RETURN_CODE(0xB2); + //! [EXPORT] : [COMMENT] Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination + static const ReturnValue_t INVALID_SUBSTITUTE = MAKE_RETURN_CODE(0xB3); + //! [EXPORT] : [COMMENT] HDLC decoding mechanism never receives the end sign 0x7E + static const ReturnValue_t MISSING_END_SIGN = MAKE_RETURN_CODE(0xB4); + //! [EXPORT] : [COMMENT] Reaction wheel only responds with empty frames. + static const ReturnValue_t NO_REPLY = MAKE_RETURN_CODE(0xB5); + +protected: + void doStartUp() override; + void doShutDown() override; + ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t * id) override; + ReturnValue_t buildTransitionDeviceCommand(DeviceCommandId_t * id) override; + void fillCommandAndReplyMap() override; + ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand, + const uint8_t * commandData,size_t commandDataLen) override; + ReturnValue_t scanForReply(const uint8_t *start, size_t remainingSize, + DeviceCommandId_t *foundId, size_t *foundLen) override; + ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, + const uint8_t *packet) override; + void setNormalDatapoolEntriesInvalid() override; + uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override; + ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap, + LocalDataPoolManager& poolManager) override; + +private: + + static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::RW_HANDLER; + + //! [EXPORT] : [COMMENT] Action Message with invalid speed was received. Valid speeds must be in the range of [-65000; 1000] or [1000; 65000] + static const ReturnValue_t INVALID_SPEED = MAKE_RETURN_CODE(0xA0); + //! [EXPORT] : [COMMENT] Action Message with invalid ramp time was received. + static const ReturnValue_t INVALID_RAMP_TIME = MAKE_RETURN_CODE(0xA1); + //! [EXPORT] : [COMMENT] Received set speed command has invalid length. Should be 6. + static const ReturnValue_t SET_SPEED_COMMAND_INVALID_LENGTH = MAKE_RETURN_CODE(0xA2); + //! [EXPORT] : [COMMENT] Command execution failed + static const ReturnValue_t EXECUTION_FAILED = MAKE_RETURN_CODE(0xA3); + //! [EXPORT] : [COMMENT] Reaction wheel reply has invalid crc + static const ReturnValue_t CRC_ERROR = MAKE_RETURN_CODE(0xA4); + + //! [EXPORT] : [COMMENT] Reaction wheel signals an error state + static const Event ERROR_STATE = MAKE_EVENT(1, severity::HIGH); + + LinuxLibgpioIF* gpioComIF = nullptr; + gpioId_t enableGpio = gpio::NO_GPIO; + + RwDefinitions::TemperatureSet temperatureSet; + RwDefinitions::StatusSet statusSet; + RwDefinitions::LastResetSatus lastResetStatusSet; + RwDefinitions::TmDataset tmDataset; + + + uint8_t commandBuffer[RwDefinitions::MAX_CMD_SIZE]; + + enum class InternalState { + GET_RESET_STATUS, + CLEAR_RESET_STATUS, + READ_TEMPERATURE, + GET_RW_SATUS + }; + + InternalState internalState = InternalState::GET_RESET_STATUS; + + size_t sizeOfReply = 0; + + /** + * @brief This function can be used to build commands which do not contain any data apart + * from the command id and the CRC. + * @param commandId The command id of the command to build. + */ + void prepareSimpleCommand(DeviceCommandId_t id); + + /** + * @brief This function checks if the receiced speed and ramp time to set are in a valid + * range. + * @return RETURN_OK if successful, otherwise error code. + */ + ReturnValue_t checkSpeedAndRampTime(const uint8_t * commandData, size_t commandDataLen); + + /** + * @brief This function prepares the set speed command from the commandData received with + * an action message. + */ + void prepareSetSpeedCmd(const uint8_t * commandData, size_t commandDataLen); + + /** + * @brief This function writes the last reset status retrieved with the get last reset status + * command into the reset status dataset. + * + * @param packet Pointer to the buffer holding the reply data. + */ + void handleResetStatusReply(const uint8_t* packet); + + /** + * @brief This function handles the reply of the get temperature command. + * + * @param packet Pointer to the reply data + */ + void handleTemperatureReply(const uint8_t* packet); + + /** + * @brief This function fills the status set with the data from the get-status-reply. + */ + void handleGetRwStatusReply(const uint8_t* packet); + + /** + * @brief This function fills the tmDataset with the reply data requested with get telemetry + * command. + */ + void handleGetTelemetryReply(const uint8_t* packet); +}; + +#endif /* MISSION_DEVICES_RWHANDLER_H_ */ diff --git a/mission/devices/devicedefinitions/Max31865Definitions.h b/mission/devices/devicedefinitions/Max31865Definitions.h index 2a789a7b..26c702a3 100644 --- a/mission/devices/devicedefinitions/Max31865Definitions.h +++ b/mission/devices/devicedefinitions/Max31865Definitions.h @@ -1,5 +1,5 @@ -#ifndef MISSION_DEVICES_DEVICEPACKETS_THERMALSENSORPACKET_H_ -#define MISSION_DEVICES_DEVICEPACKETS_THERMALSENSORPACKET_H_ +#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_MAX13865DEFINITIONS_H_ +#define MISSION_DEVICES_DEVICEDEFINITIONS_MAX13865DEFINITIONS_H_ #include #include @@ -54,5 +54,5 @@ public: } -#endif /* MISSION_DEVICES_DEVICEPACKETS_THERMALSENSORPACKET_H_ */ +#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_MAX13865DEFINITIONS_H_ */ diff --git a/mission/devices/devicedefinitions/RwDefinitions.h b/mission/devices/devicedefinitions/RwDefinitions.h new file mode 100644 index 00000000..d87c09fd --- /dev/null +++ b/mission/devices/devicedefinitions/RwDefinitions.h @@ -0,0 +1,232 @@ +#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_RWDEFINITIONS_H_ +#define MISSION_DEVICES_DEVICEDEFINITIONS_RWDEFINITIONS_H_ + +#include +#include +#include +#include "objects/systemObjectList.h" + +namespace RwDefinitions { + +static const uint32_t SPI_REPLY_DELAY = 70000; //us + +enum PoolIds: lp_id_t { + TEMPERATURE_C, + CURR_SPEED, + REFERENCE_SPEED, + STATE, + CLC_MODE, + LAST_RESET_STATUS, + CURRRENT_RESET_STATUS, + TM_LAST_RESET_STATUS, + TM_MCU_TEMPERATURE, + TM_RW_STATE, + TM_CLC_MODE, + TM_RW_CURR_SPEED, + TM_RW_REF_SPEED, + INVALID_CRC_PACKETS, + INVALID_LEN_PACKETS, + INVALID_CMD_PACKETS, + EXECUTED_REPLIES, + COMMAND_REPLIES, + UART_BYTES_WRITTEN, + UART_BYTES_READ, + UART_PARITY_ERRORS, + UART_NOISE_ERRORS, + UART_FRAME_ERRORS, + UART_REG_OVERRUN_ERRORS, + UART_TOTAL_ERRORS, + TOTAL_ERRORS, + SPI_BYTES_WRITTEN, + SPI_BYTES_READ, + SPI_REG_OVERRUN_ERRORS, + SPI_TOTAL_ERRORS +}; + +enum States: uint8_t { + ERROR, + IDLE, + COASTING, + RUNNING_SPEED_STABLE, + RUNNING_SPEED_CHANGING +}; + +enum LastResetStatus: uint8_t { + CLEARED = 0, + PIN_RESET = 1, + POR_PDR_BOR_RESET = 2, + SOFTWARE_RESET = 4, + INDEPENDENT_WATCHDOG_RESET = 8, + WINDOW_WATCHDOG_RESET = 16, + LOW_POWER_RESET = 32 +}; + +static const DeviceCommandId_t RESET_MCU = 1; +static const DeviceCommandId_t GET_LAST_RESET_STATUS = 2; +static const DeviceCommandId_t CLEAR_LAST_RESET_STATUS = 3; +static const DeviceCommandId_t GET_RW_STATUS = 4; +/** This command is needed to recover from error state */ +static const DeviceCommandId_t INIT_RW_CONTROLLER = 5; +static const DeviceCommandId_t SET_SPEED = 6; +static const DeviceCommandId_t GET_TEMPERATURE = 8; +static const DeviceCommandId_t GET_TM = 9; + +static const uint32_t TEMPERATURE_SET_ID = GET_TEMPERATURE; +static const uint32_t STATUS_SET_ID = GET_RW_STATUS; +static const uint32_t LAST_RESET_ID = GET_LAST_RESET_STATUS; +static const uint32_t TM_SET_ID = GET_TM; + +static const size_t SIZE_GET_RESET_STATUS = 5; +static const size_t SIZE_CLEAR_RESET_STATUS = 4; +static const size_t SIZE_INIT_RW = 4; +static const size_t SIZE_GET_RW_STATUS = 14; +static const size_t SIZE_SET_SPEED_REPLY = 4; +static const size_t SIZE_GET_TEMPERATURE_REPLY = 8; +/** Max size when requesting telemetry */ +static const size_t SIZE_GET_TELEMETRY_REPLY = 83; + +/** Set speed command has maximum size */ +static const size_t MAX_CMD_SIZE = 9; +/** + * Max reply is reached when each byte is replaced by its substitude which should normally never + * happen. + */ +static const size_t MAX_REPLY_SIZE = 2 * SIZE_GET_TELEMETRY_REPLY; + +static const uint8_t LAST_RESET_ENTRIES = 2; +static const uint8_t TEMPERATURE_SET_ENTRIES = 1; +static const uint8_t STATUS_SET_ENTRIES = 4; +static const uint8_t TM_SET_ENTRIES = 22; + +/** + * @brief This dataset can be used to store the temperature of a reaction wheel. + */ +class TemperatureSet: + public StaticLocalDataSet { +public: + + TemperatureSet(HasLocalDataPoolIF* owner): + StaticLocalDataSet(owner, TEMPERATURE_SET_ID) { + } + + TemperatureSet(object_id_t objectId): + StaticLocalDataSet(sid_t(objectId, TEMPERATURE_SET_ID)) { + } + + lp_var_t temperatureCelcius = lp_var_t(sid.objectId, + PoolIds::TEMPERATURE_C, this); +}; + +/** + * @brief This dataset can be used to store the reaction wheel status. + */ +class StatusSet: + public StaticLocalDataSet { +public: + + StatusSet(HasLocalDataPoolIF* owner): + StaticLocalDataSet(owner, STATUS_SET_ID) { + } + + StatusSet(object_id_t objectId): + StaticLocalDataSet(sid_t(objectId, STATUS_SET_ID)) { + } + + lp_var_t currSpeed = lp_var_t(sid.objectId, + PoolIds::CURR_SPEED, this); + lp_var_t referenceSpeed = lp_var_t(sid.objectId, + PoolIds::REFERENCE_SPEED, this); + lp_var_t state = lp_var_t(sid.objectId, + PoolIds::STATE, this); + lp_var_t clcMode = lp_var_t(sid.objectId, + PoolIds::CLC_MODE, this); +}; + +/** + * @brief This dataset stores the last reset status. + */ +class LastResetSatus: + public StaticLocalDataSet { +public: + + LastResetSatus(HasLocalDataPoolIF* owner): + StaticLocalDataSet(owner, LAST_RESET_ID) { + } + + LastResetSatus(object_id_t objectId): + StaticLocalDataSet(sid_t(objectId, LAST_RESET_ID)) { + } + + lp_var_t lastResetStatus = lp_var_t(sid.objectId, + PoolIds::LAST_RESET_STATUS, this); + lp_var_t currentResetStatus = lp_var_t(sid.objectId, + PoolIds::CURRRENT_RESET_STATUS, this); +}; + +/** + * @brief This dataset stores telemetry data as specified in the datasheet of the nano avionics + * reaction wheels. https://eive-cloud.irs.uni-stuttgart.de/index.php/apps/files/?dir=/ + * EIVE_IRS/Arbeitsdaten/08_Used%20Components/Nanoavionics_Reactionwheels&fileid=181622 + */ +class TmDataset: + public StaticLocalDataSet { +public: + + TmDataset(HasLocalDataPoolIF* owner): + StaticLocalDataSet(owner, TM_SET_ID) { + } + + TmDataset(object_id_t objectId): + StaticLocalDataSet(sid_t(objectId, TM_SET_ID)) { + } + + lp_var_t lastResetStatus = lp_var_t(sid.objectId, + PoolIds::TM_LAST_RESET_STATUS, this); + lp_var_t mcuTemperature = lp_var_t(sid.objectId, + PoolIds::TM_MCU_TEMPERATURE, this); + lp_var_t rwState = lp_var_t(sid.objectId, + PoolIds::TM_RW_STATE, this); + lp_var_t rwClcMode = lp_var_t(sid.objectId, + PoolIds::TM_CLC_MODE, this); + lp_var_t rwCurrSpeed = lp_var_t(sid.objectId, + PoolIds::TM_RW_CURR_SPEED, this); + lp_var_t rwRefSpeed = lp_var_t(sid.objectId, + PoolIds::TM_RW_REF_SPEED, this); + lp_var_t numOfInvalidCrcPackets = lp_var_t(sid.objectId, + PoolIds::INVALID_CRC_PACKETS, this); + lp_var_t numOfInvalidLenPackets = lp_var_t(sid.objectId, + PoolIds::INVALID_LEN_PACKETS, this); + lp_var_t numOfInvalidCmdPackets = lp_var_t(sid.objectId, + PoolIds::INVALID_CMD_PACKETS, this); + lp_var_t numOfCmdExecutedReplies = lp_var_t(sid.objectId, + PoolIds::EXECUTED_REPLIES, this); + lp_var_t numOfCmdReplies = lp_var_t(sid.objectId, + PoolIds::COMMAND_REPLIES, this); + lp_var_t uartNumOfBytesWritten = lp_var_t(sid.objectId, + PoolIds::UART_BYTES_WRITTEN, this); + lp_var_t uartNumOfBytesRead = lp_var_t(sid.objectId, + PoolIds::UART_BYTES_READ, this); + lp_var_t uartNumOfParityErrors = lp_var_t(sid.objectId, + PoolIds::UART_PARITY_ERRORS, this); + lp_var_t uartNumOfNoiseErrors = lp_var_t(sid.objectId, + PoolIds::UART_NOISE_ERRORS, this); + lp_var_t uartNumOfFrameErrors = lp_var_t(sid.objectId, + PoolIds::UART_FRAME_ERRORS, this); + lp_var_t uartNumOfRegisterOverrunErrors = lp_var_t(sid.objectId, + PoolIds::UART_REG_OVERRUN_ERRORS, this); + lp_var_t uartTotalNumOfErrors = lp_var_t(sid.objectId, + PoolIds::UART_TOTAL_ERRORS, this); + lp_var_t spiNumOfBytesWritten = lp_var_t(sid.objectId, + PoolIds::SPI_BYTES_WRITTEN, this); + lp_var_t spiNumOfBytesRead = lp_var_t(sid.objectId, + PoolIds::SPI_BYTES_READ, this); + lp_var_t spiNumOfRegisterOverrunErrors = lp_var_t(sid.objectId, + PoolIds::SPI_REG_OVERRUN_ERRORS, this); + lp_var_t spiTotalNumOfErrors = lp_var_t(sid.objectId, + PoolIds::SPI_TOTAL_ERRORS, this); +}; + +} + +#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_RWDEFINITIONS_H_ */ +