From d56d10b75d81c2090aad526a19b183dfc473a518 Mon Sep 17 00:00:00 2001 From: "Jakob.Meier" Date: Sat, 7 Nov 2020 16:48:30 +0100 Subject: [PATCH] compiled for q7s, q7s readme parts --- Makefile | 24 +++++++- README.md | 108 +++++++++++++++++++++++++++------ bsp_linux/main.cpp | 2 - mission/core/ObjectFactory.cpp | 10 +-- tmtc | 2 +- 5 files changed, 111 insertions(+), 35 deletions(-) diff --git a/Makefile b/Makefile index 1e089c5e..df94de6f 100644 --- a/Makefile +++ b/Makefile @@ -70,8 +70,20 @@ CLEANBIN2 = $(BUILDPATH)/$(OUTPUT_FOLDER)/devel #------------------------------------------------------------------------------- # Tool suffix when cross-compiling -CROSS_COMPILE = +CROSS_COMPILE = arm-linux-gnueabihf- +ifdef WINDOWS +# C Compiler +CC = $(CROSS_COMPILE)gcc.exe + +# C++ compiler +CXX = $(CROSS_COMPILE)g++.exe + +# Additional Tools +SIZE = $(CROSS_COMPILE)size.exe +STRIP = $(CROSS_COMPILE)strip.exe +CP = $(CROSS_COMPILE)objcopy.exe +else # C Compiler CC = $(CROSS_COMPILE)gcc @@ -82,6 +94,7 @@ CXX = $(CROSS_COMPILE)g++ SIZE = $(CROSS_COMPILE)size STRIP = $(CROSS_COMPILE)strip CP = $(CROSS_COMPILE)objcopy +endif HEXCOPY = $(CP) -O ihex BINCOPY = $(CP) -O binary @@ -250,6 +263,7 @@ hardclean: # Only clean files for current build clean: + @echo $(DEPFILES) -rm -rf $(CLEANOBJ) -rm -rf $(CLEANBIN) -rm -rf $(CLEANDEP) @@ -322,6 +336,7 @@ endif $(OBJDIR)/%.o: %.cpp $(OBJDIR)/%.o: %.cpp $(DEPENDDIR)/%.d | $(DEPENDDIR) + @echo $(I_INCLUDES) @echo @echo $(MSG_COMPILING) $< @mkdir -p $(@D) @@ -343,6 +358,7 @@ else @$(CC) $(CXXFLAGS) $(CFLAGS) -c -o $@ $< endif + #------------------------------------------------------------------------------- # Dependency Handling #------------------------------------------------------------------------------- @@ -357,8 +373,10 @@ DEPFILES = $(addprefix $(DEPENDDIR)/, $(DEPENDENCY_RELATIVE)) # Create subdirectories for dependencies $(DEPFILES): @mkdir -p $(@D) + + # Include all dependencies -include $(wildcard $(DEPFILES)) +include $(wildcard $(DEPFILES)) # .PHONY tells make that these targets aren't files -.PHONY: clean sdramCfg release debug all hardclean +.PHONY: clean sdramCfg release debug all hardclean diff --git a/README.md b/README.md index 370542a3..a2d23e82 100644 --- a/README.md +++ b/README.md @@ -1,23 +1,38 @@ # EIVE On-Board Software -## Linux -These steps were tested for Ubuntu 20.04. -If not done yet, install the full C++ build chain: -```sh -sudo apt-get install build-essential -``` +## General information +* OBC + * Xiphos Q7S + * Based on Zynq-7020 SoC (xc7z020clg484-2) + * Dual-core ARM Cortex-A9 + * 766 MHz + * Artix-7 FPGA (85K pogrammable logic cells) + * Datasheet at https://eive-cloud.irs.uni-stuttgart.de/index.php/apps/files/?dir=/EIVE_IRS/Arbeitsdaten/08_Used%20Components/Q7S&fileid=340648 +* Linux OS + * Build with Yocto 2.5 + * Linux Kernel https://github.com/XiphosSystemsCorp/linux-xlnx.git + -Linux has a limit to message queue message. Please see the section -to set up UNIX environment for more information. -Sometimes, special steps are necessary so the real-time functionalities can be used -without root privileges. Instructions are contained in the setup section -for UNIX as well. +## Setting up development environment +* Install Vivado 2018.2 and Xilinx SDK from https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive.html +* For supported OS refer to https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug973-vivado-release-notes-install-license.pdf +* Add path of linux cross-compiler to environment variables SDK\2018.2\gnu\aarch32\nt\gcc-arm-linux-gnueabi\bin +* Install make (only on windows, SDK on Linux can use the make installed with the SDK) + 1. Install NodeJS LTS + 2. Install xpm + ```` + npm install --global xpm + ```` + 3. Install Windows build tools (after installation also linux commands like mkdir can be used from windows) + ```` + xpm install --global @xpack-dev-tools/windows-build-tools@latest + ```` ### Building the software 1. Clone the repository with ```sh -git clone https://egit.irs.uni-stuttgart.de/fsfw/fsfw_example.git +git clone https://egit.irs.uni-stuttgart.de/eive/eive_obsw.git ``` 2. Update all the submodules @@ -27,15 +42,68 @@ git submodule sync git submodule update ``` -3. After that, the linux binary can be built with: -```sh -make -j all -``` -to compile for Linux. All will build the debug version, -which can also be built with the target `debug`. The optimized -release version can be built with the target `release`. +4. Open Xilinx SDK 2018.2 +5. Import project + * File → Import → C/C++ → Existing Code as Makefile Project +6. Set build command + * When on Linux right click project → Properties → C/C++ Build → Set build command to make -j + * -j causes the compiler to use all available cores + * On windows create a make target (Windows → Show View → Make Target) + * Right click eive_obsw → New → + * Target name: all + * Uncheck "Same as the target name" + * Uncheck "Use builder settings" + * As build command type: \make -j all WINDOWS=1 +7. Run build command (double click the generated target) -4. Run the binary located inside the `_bin` folder. +### Debugging the software +1. Assign static IP address to Q7S + * Open serial console of Q7S (Accessible via the micro-USB of the PIM, see also Q7S user maunal chapter 10.3) + * Baudrate 115200 + * Login to Q7S: + * user: root + * pw: root + * Set IP address and netmask with + ```` + ifconfig eth0 192.168.133.10 + ifconfig eth0 255.255.255.0 + ```` +2. Connect Q7S to workstation via ethernet +3. Make sure the netmask of the ehternet interface of the workstation matches the netmask of the Q7S + * When IP address is set to 192.168.133.10 and the netmask is 255.255.255.0, an example IP address for the workstation + is 192.168.133.2 +4. Run tcf-agent on Q7S + * Tcf-agent is not yet integrated in the rootfs of the Q7S. Therefore build tcf-agent manually + ```` + git clone git://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git + cd org.eclipse.tcf.agent/agent + make CC=arm-linux-gnueabihf-gcc LD=arm-linux-gnueabihf-ld MACHINE=arm NO_SSL=1 NO_UUID=1 + ```` + * Transfer executable agent from org.eclipse.tcf.agent/agent/obj/GNU/Linux/arm/Debug to /tmp of Q7S + ```` + cd obj/GNU/Linux/arm/Debug + scp agent root@192.168.133.10:/tmp + ```` + * On Q7S + ```` + cd /tmp + chmod +x agent + ```` + * Run agent + ```` + ./agent + ```` +5. In Xilinx SDK 2018.2 right click on project → Debug As → Debug Configurations +6. Right click Xilinx C/C++ applicaton (System Debugger) → New → +7. Set Debug Type to Linux Application Debug and Connectin to Linux Agent +8. Click New +9. Give connection a name +10. Set Host to static IP address of Q7S. e.g. 192.168.133.10 +11. Test connection (This ensures the TCF Agent is running on the Q7S) +12. Select Application tab + * Project Name: eive_obsw + * Local File Path: Path to eiveobsw-linux.elf (in _bin\linux\devel) + * Remote File Path: /tmp/eive_obsw.elf ### Setting up UNIX environment for real-time functionalities Please note that on most UNIX environments (e.g. Ubuntu), the real time functionalities diff --git a/bsp_linux/main.cpp b/bsp_linux/main.cpp index 98198838..a2bd4fbf 100644 --- a/bsp_linux/main.cpp +++ b/bsp_linux/main.cpp @@ -9,8 +9,6 @@ #include #include - - /** * @brief This is the main program for the hosted build. It can be run for * Linux and Windows. diff --git a/mission/core/ObjectFactory.cpp b/mission/core/ObjectFactory.cpp index 3561a4b7..b5a43fb4 100644 --- a/mission/core/ObjectFactory.cpp +++ b/mission/core/ObjectFactory.cpp @@ -99,19 +99,11 @@ void ObjectFactory::produce(){ /* TMTC Reception via UDP socket */ new TmFunnel(objects::TM_FUNNEL); -#ifdef LINUX + new TmTcUnixUdpBridge(objects::UDP_BRIDGE, objects::CCSDS_PACKET_DISTRIBUTOR, objects::TM_STORE, objects::TC_STORE); new TcUnixUdpPollingTask(objects::UDP_POLLING_TASK, objects::UDP_BRIDGE); -#elif WIN32 - new TmTcWinUdpBridge(objects::UDP_BRIDGE, - objects::CCSDS_PACKET_DISTRIBUTOR, objects::TM_STORE, - objects::TC_STORE); - new TcWinUdpPollingTask(objects::UDP_POLLING_TASK, - objects::UDP_BRIDGE); -#endif - /* PUS stack */ new Service1TelecommandVerification(objects::PUS_SERVICE_1_VERIFICATION, diff --git a/tmtc b/tmtc index 480b0a16..ee295fa8 160000 --- a/tmtc +++ b/tmtc @@ -1 +1 @@ -Subproject commit 480b0a16456ff09dfdfdd85b945926a73d19c09c +Subproject commit ee295fa849ec7af33204f437d60742d173ac5c4b