bsp_q7s/main.cpp

@@ -6,7 +6,6 @@
 #include "simple/simple.h"
 #endif
 
-
 #include <iostream>
 
 /**

linux/devices/devicedefinitions/PlocMPSoCDefinitions.h

@@ -32,7 +32,6 @@ static const DeviceCommandId_t TM_CAM_CMD_RPT = 19;
 static const DeviceCommandId_t SET_UART_TX_TRISTATE = 20;
 static const DeviceCommandId_t RELEASE_UART_TX = 21;
 
-
 // Will reset the sequence count of the OBSW
 static const DeviceCommandId_t OBSW_RESET_SEQ_COUNT = 50;
 

linux/devices/devicedefinitions/PlocSupervisorDefinitions.h

@@ -1564,9 +1564,8 @@ class ExecutionReport : public VerificationReport {
         break;
       }
       case StatusCode::NOTHING_TODO: {
-        sif::warning
+        sif::warning << STATUS_PRINTOUT_PREFIX << "Nothing todo, not an error but a warning"
-            << STATUS_PRINTOUT_PREFIX << "Nothing todo, not an error but a warning"
+                     << std::endl;
-            << std::endl;
         break;
       }
       case StatusCode::POWER_FAULT: {
@@ -1578,9 +1577,8 @@ class ExecutionReport : public VerificationReport {
         break;
       }
       case StatusCode::OUT_OF_RANGE: {
-        sif::warning
+        sif::warning << STATUS_PRINTOUT_PREFIX << "Out of range, lenght check of parameter failed"
-            << STATUS_PRINTOUT_PREFIX << "Out of range, lenght check of parameter failed"
+                     << std::endl;
-            << std::endl;
         break;
       }
       case StatusCode::OUT_OF_HEAP_MEMORY: {

linux/devices/devicedefinitions/SupvReturnValuesIF.h

@@ -50,9 +50,11 @@ class SupvReturnValuesIF {
   static const ReturnValue_t FILENAME_TOO_LONG = MAKE_RETURN_CODE(0xB0);
   //! [EXPORT] : [COMMENT] Received update status report with invalid packet length field
   static const ReturnValue_t UPDATE_STATUS_REPORT_INVALID_LENGTH = MAKE_RETURN_CODE(0xB1);
-  //! [EXPORT] : [COMMENT] Update status report does not contain expected CRC. There might be a bit flip in the update memory region.
+  //! [EXPORT] : [COMMENT] Update status report does not contain expected CRC. There might be a bit
+  //! flip in the update memory region.
   static const ReturnValue_t UPDATE_CRC_FAILURE = MAKE_RETURN_CODE(0xB2);
-  //! [EXPORT] : [COMMENT] Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command)
+  //! [EXPORT] : [COMMENT] Supervisor helper task ist currently executing a command (wait until
+  //! helper tas has finished or interrupt by sending the terminate command)
   static const ReturnValue_t SUPV_HELPER_EXECUTING = MAKE_RETURN_CODE(0xB3);
 };
 

linux/devices/ploc/PlocMPSoCHandler.cpp

@@ -99,19 +99,19 @@ void PlocMPSoCHandler::performOperationHook() {
 ReturnValue_t PlocMPSoCHandler::executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
                                               const uint8_t* data, size_t size) {
   ReturnValue_t result = RETURN_OK;
-  switch(actionId) {
+  switch (actionId) {
-  case mpsoc::SET_UART_TX_TRISTATE: {
+    case mpsoc::SET_UART_TX_TRISTATE: {
-		uartIsolatorSwitch.pullLow();
+      uartIsolatorSwitch.pullLow();
-		return EXECUTION_FINISHED;
+      return EXECUTION_FINISHED;
-		break;
+      break;
-	}
+    }
-	case mpsoc::RELEASE_UART_TX: {
+    case mpsoc::RELEASE_UART_TX: {
-		uartIsolatorSwitch.pullHigh();
+      uartIsolatorSwitch.pullHigh();
-		return EXECUTION_FINISHED;
+      return EXECUTION_FINISHED;
-		break;
+      break;
-	default:
+      default:
-    break;
+        break;
-	}
+    }
   }
 
   if (plocMPSoCHelperExecuting) {
@@ -165,7 +165,7 @@ void PlocMPSoCHandler::doStartUp() {
   powerState = PowerState::ON;
   setMode(_MODE_TO_ON);
   uartIsolatorSwitch.pullHigh();
-#endif/* not MSPOC_JTAG_BOOT == 1 */
+#endif /* not MSPOC_JTAG_BOOT == 1 */
 #else
   powerState = PowerState::ON;
   setMode(_MODE_TO_ON);

linux/devices/ploc/PlocSupervisorHandler.h

@@ -2,16 +2,16 @@
 #define MISSION_DEVICES_PLOCSUPERVISORHANDLER_H_
 
 #include "OBSWConfig.h"
+#include "PlocSupvHelper.h"
 #include "bsp_q7s/memory/SdCardManager.h"
 #include "devices/powerSwitcherList.h"
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
+#include "fsfw/timemanager/Countdown.h"
 #include "fsfw_hal/linux/gpio/Gpio.h"
 #include "fsfw_hal/linux/gpio/LinuxLibgpioIF.h"
 #include "fsfw_hal/linux/uart/UartComIF.h"
-#include "fsfw/timemanager/Countdown.h"
 #include "linux/devices/devicedefinitions/PlocSupervisorDefinitions.h"
 #include "linux/devices/devicedefinitions/SupvReturnValuesIF.h"
-#include "PlocSupvHelper.h"
 
 /**
  * @brief	This is the device handler for the supervisor of the PLOC which is programmed by
@@ -59,7 +59,6 @@ class PlocSupervisorHandler : public DeviceHandlerBase {
   virtual ReturnValue_t doSendReadHook() override;
 
  private:
-
   static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PLOC_SUPERVISOR_HANDLER;
 
   //! [EXPORT] : [COMMENT] PLOC supervisor crc failure in telemetry packet

linux/devices/ploc/PlocSupvHelper.h

@@ -64,13 +64,11 @@ class PlocSupvHelper : public SystemObject, public ExecutableObjectIF, public Ha
   //! [EXPORT] : [COMMENT] Execution report failure
   //! P1:
   static const Event SUPV_EXE_FAILURE_REPORT = MAKE_EVENT(12, severity::LOW);
-  //! [EXPORT] : [COMMENT] Supervisor expected acknowledgment report but received space packet with other apid
+  //! [EXPORT] : [COMMENT] Supervisor expected acknowledgment report but received space packet with
-  //! P1: Apid of received space packet
+  //! other apid P1: Apid of received space packet P2: Internal state of supervisor helper
-  //! P2: Internal state of supervisor helper
   static const Event SUPV_ACK_INVALID_APID = MAKE_EVENT(13, severity::LOW);
-  //! [EXPORT] : [COMMENT] Supervisor helper expected execution report but received space packet with other apid
+  //! [EXPORT] : [COMMENT] Supervisor helper expected execution report but received space packet
-  //! P1: Apid of received space packet
+  //! with other apid P1: Apid of received space packet P2: Internal state of supervisor helper
-  //! P2: Internal state of supervisor helper
   static const Event SUPV_EXE_INVALID_APID = MAKE_EVENT(14, severity::LOW);
   //! [EXPORT] : [COMMENT] Failed to receive acknowledgment report
   //! P1: Return value

linux/devices/startracker/StrHelper.cpp

@@ -6,9 +6,9 @@
 #include "OBSWConfig.h"
 #include "fsfw/timemanager/Countdown.h"
 #include "linux/devices/devicedefinitions/StarTrackerDefinitions.h"
+#include "mission/utility/Filenaming.h"
 #include "mission/utility/ProgressPrinter.h"
 #include "mission/utility/Timestamp.h"
-#include "mission/utility/Filenaming.h"
 
 StrHelper::StrHelper(object_id_t objectId) : SystemObject(objectId) {}
 

mission/tmtc/VirtualChannel.cpp

@@ -30,8 +30,8 @@ ReturnValue_t VirtualChannel::performOperation() {
   uint8_t data[50] = {0xa};
   result = ptme->writeToVc(vcId, data, sizeof(data));
   if (result != RETURN_OK) {
-	  sif::warning << "VirtualChannel::performOperation: Failed to send test data" << std::endl;
+    sif::warning << "VirtualChannel::performOperation: Failed to send test data" << std::endl;
-	  return result;
+    return result;
   }
 
   while (tmQueue->receiveMessage(&message) == RETURN_OK) {

mission/utility/Filenaming.cpp

@@ -1,11 +1,11 @@
 #include "Filenaming.h"
+
 #include "Timestamp.h"
 
-Filenaming::Filenaming() {
+Filenaming::Filenaming() {}
-}
 
 std::string Filenaming::generateAbsoluteFilename(std::string path, std::string filename,
-                                                       bool addTimestamp) {
+                                                 bool addTimestamp) {
   std::string absoluteName;
   Timestamp timestamp;
   if (addTimestamp) {

mission/utility/Filenaming.h

@@ -20,6 +20,7 @@ class Filenaming {
    */
   static std::string generateAbsoluteFilename(std::string path, std::string filename,
                                               bool addTimestamp);
+
  private:
   Filenaming();
 };

mission/utility/ProgressPrinter.cpp

@@ -1,5 +1,7 @@
-#include <iomanip>
 #include "ProgressPrinter.h"
+
+#include <iomanip>
+
 #include "fsfw/serviceinterface/ServiceInterfaceStream.h"
 
 ProgressPrinter::ProgressPrinter(std::string name, uint32_t numSteps, float percentageResolution)

mission/utility/ProgressPrinter.h

@@ -10,7 +10,6 @@
  */
 class ProgressPrinter {
  public:
-
   static constexpr float HALF_PERCENT = 0.5;
   static constexpr float ONE_PERCENT = 1;
   static constexpr float FIVE_PERCENT = 5;
@@ -34,7 +33,6 @@ class ProgressPrinter {
   void print(uint32_t step);
 
  private:
-
   std::string name = "";
   uint32_t numSteps = 0;
   float nextProgressPrint = 0;