#include <fsfw_hal/linux/uio/UioMapper.h>
#include <linux/ipcore/PapbVcInterface.h>
#include <unistd.h>

#include <cstring>
#include <ctime>

#include "fsfw/serviceinterface/ServiceInterface.h"

PapbVcInterface::PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbEmptyId,
                                 std::string uioFile, int mapNum)
    : gpioComIF(gpioComIF), papbEmptyId(papbEmptyId), uioFile(std::move(uioFile)), mapNum(mapNum) {}

PapbVcInterface::~PapbVcInterface() {}

ReturnValue_t PapbVcInterface::initialize() {
  UioMapper uioMapper(uioFile, mapNum);
  ReturnValue_t result = uioMapper.getMappedAdress(const_cast<uint32_t**>(&vcBaseReg),
                                                   UioMapper::Permissions::READ_WRITE);
  if (result != returnvalue::OK) {
    return result;
  }
  return returnvalue::OK;
}

ReturnValue_t PapbVcInterface::write(const uint8_t* data, size_t size) {
  // There are no packets smaller than 4, this is considered a configuration error.
  if (size < 4) {
    return returnvalue::FAILED;
  }
  if (pollReadyForPacket()) {
    startPacketTransfer(ByteWidthCfg::ONE);
  } else {
    return DirectTmSinkIF::IS_BUSY;
  }
  // TODO: This should work but does not.. :(
  //  size_t idx = 0;
  //  while (idx < size) {
  //
  //    nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
  //    if ((size - idx) < 4) {
  //      *vcBaseReg = CONFIG_DATA_INPUT | (size - idx - 1);
  //      usleep(1);
  //    }
  //    if (pollPapbBusySignal(2) == returnvalue::OK) {
  //      //      vcBaseReg + DATA_REG_OFFSET + 3 = static_cast<uint8_t>(data + idx);
  //      //      vcBaseReg + DATA_REG_OFFSET + 2 = static_cast<uint8_t>(data + idx + 1);
  //      //      vcBaseReg + DATA_REG_OFFSET + 1 = static_cast<uint8_t>(data + idx + 2);
  //      //      vcBaseReg + DATA_REG_OFFSET = static_cast<uint8_t>(data + idx + 3);
  //
  //      // std::memcpy((vcBaseReg + DATA_REG_OFFSET), data + idx , nextWriteSize);
  //      *(vcBaseReg + DATA_REG_OFFSET) = *reinterpret_cast<const uint32_t*>(data + idx);
  //      //uint8_t* byteReg = reinterpret_cast<uint8_t*>(vcBaseReg + DATA_REG_OFFSET);
  //
  //      //byteReg[0] = data[idx];
  //      //byteReg[1] = data[idx];
  //    } else {
  //      abortPacketTransfer();
  //      return returnvalue::FAILED;
  //    }
  //    // TODO: Change this after the bugfix. Right now, the PAPB ignores the content of the byte
  //    // width configuration.5
  //    // It's okay to increment by a larger amount for the last segment here, loop will be over
  //    // in any case.
  //    idx += 4;
  //  }
  for (size_t idx = 0; idx < size; idx++) {
    // if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
    *(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
    //} else {
    //  abortPacketTransfer();
    //  return returnvalue::FAILED;
    //}
  }
  // if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
  completePacketTransfer();
  //} else {
  //  abortPacketTransfer();
  //  return returnvalue::FAILED;
  //}
  return returnvalue::OK;
}

void PapbVcInterface::startPacketTransfer(ByteWidthCfg initWidth) {
  *vcBaseReg = CONFIG_DATA_INPUT | initWidth;
}

void PapbVcInterface::completePacketTransfer() { *vcBaseReg = CONFIG_END; }

bool PapbVcInterface::pollReadyForPacket() const {
  // uint32_t busyIdx = 0;
  // nextDelay.tv_nsec = FIRST_DELAY_PAPB_POLLING_NS;

  // while (true) {
  //  Check if PAPB interface is ready to receive data. Use the configuration register for this.
  //  Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
  uint32_t reg = *vcBaseReg;
  // bool busy = (reg >> 5) & 0b1;
  return (reg >> 6) & 0b1;
  //    if (checkReadyForPacketState) {
  //      if (not busy and readyForPacket) {
  //        return returnvalue::OK;
  //      } else if (not busy and not readyForPacket) {
  //        return PAPB_BUSY;
  //      }
  //    } else if (not busy) {
  //      return returnvalue::OK;
  //    }
  //
  //    busyIdx++;
  //    if (busyIdx >= maxPollRetries) {
  //      return PAPB_BUSY;
  //    }
  //
  //    // Ignore signal handling here for now.
  //    nanosleep(&nextDelay, &remDelay);
  //    // Adaptive delay.
  //    if (nextDelay.tv_nsec * 2 <= MAX_DELAY_PAPB_POLLING_NS) {
  //      nextDelay.tv_nsec *= 2;
  //    }
  //  }
  // return returnvalue::OK;
}

bool PapbVcInterface::isVcInterfaceBufferEmpty() {
  ReturnValue_t result = returnvalue::OK;
  gpio::Levels papbEmptyState = gpio::Levels::HIGH;

  result = gpioComIF->readGpio(papbEmptyId, papbEmptyState);

  if (result != returnvalue::OK) {
    sif::error << "PapbVcInterface::isVcInterfaceBufferEmpty: Failed to read papb empty signal"
               << std::endl;
    return true;
  }

  if (papbEmptyState == gpio::Levels::HIGH) {
    return true;
  }
  return false;
}

bool PapbVcInterface::isBusy() const { return not pollReadyForPacket(); }

void PapbVcInterface::cancelTransfer() { abortPacketTransfer(); }

ReturnValue_t PapbVcInterface::sendTestFrame() {
  /** Size of one complete transfer frame data field amounts to 1105 bytes */
  uint8_t testPacket[1105];

  /** Fill one test packet */
  for (int idx = 0; idx < 1105; idx++) {
    testPacket[idx] = static_cast<uint8_t>(idx & 0xFF);
  }

  ReturnValue_t result = write(testPacket, 1105);
  if (result != returnvalue::OK) {
    return result;
  }

  return returnvalue::OK;
}

void PapbVcInterface::abortPacketTransfer() { *vcBaseReg = CONFIG_ABORT; }