#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_GOMSPACEDEFINITIONS_H_
#define MISSION_DEVICES_DEVICEDEFINITIONS_GOMSPACEDEFINITIONS_H_

#include <fsfw/datapoollocal/LocalPoolVariable.h>
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
#include <fsfw/introspection/ClasslessEnum.h>
#include <fsfw/power/definitions.h>

#include <cstdint>

#include "devices/powerSwitcherList.h"

namespace GOMSPACE {

/**
 * Device commands are derived from the rparam.h of the gomspace lib..
 * IDs above 50 are reserved for device specific commands.
 */
FSFW_CLASSLESS_ENUM(
    GomspaceCommands, DeviceCommandId_t,
    ((PING, 1, "Ping"))((NONE, 2, "None (used internally)"))((REBOOT, 4, "Reboot"))(
        (GNDWDT_RESET, 9, "Reset Watchdog"))((PARAM_GET, 0, "Get Parameter"))(
        (PARAM_SET, 255, "Set Parameter"))((REQUEST_HK_TABLE, 16, "Request Housekeeping Table"))(
        (PRINT_SWITCH_V_I, 32, "Print switch states, voltages and currents to the console"))(
        (PRINT_LATCHUPS, 33, "Print Latchups to the console")))

enum class Pdu { PDU1, PDU2 };

using ChannelSwitchHook = void (*)(Pdu pdu, uint8_t channel, bool on, void* args);

static const uint16_t IGNORE_CHECKSUM = 0xbb0;
/** The size of the header of a gomspace CSP packet. */
static const uint8_t GS_HDR_LENGTH = 12;
/** CSP port to ping gomspace devices. */
static const uint8_t PING_PORT = 1;
static const uint8_t REBOOT_PORT = 4;
/** CSP port of gomspace devices to request or set parameters */
static const uint8_t PARAM_PORT = 7;
static const uint8_t P60_PORT_GNDWDT_RESET = 9;

}  // namespace GOMSPACE

namespace P60System {

enum class BatteryModes : uint8_t { CRITICAL = 1, SAFE = 2, NORMAL = 3, FULL = 4 };

enum class SetIds : uint32_t {
  PDU_1_CORE = 1,
  PDU_1_AUX = 2,
  PDU_2_CORE = 3,
  PDU_2_AUX = 4,
  P60_CORE = 5,
  P60_AUX = 6,
  ACU_CORE = 7,
  ACU_AUX = 8
};

namespace pool {

enum Ids : lp_id_t {
  P60_CURRENTS,
  P60_VOLTAGES,
  P60_OUTPUT_ENABLE,
  P60DOCK_TEMPERATURE_1,
  P60DOCK_TEMPERATURE_2,
  P60DOCK_BOOT_CAUSE,
  P60DOCK_BOOT_CNT,
  P60DOCK_UPTIME,
  P60DOCK_RESETCAUSE,
  P60DOCK_BATT_MODE,
  P60DOCK_HEATER_ON,
  P60DOCK_CONV_5V_ENABLE_STATUS,
  LATCHUPS,
  P60DOCK_DOCK_VBAT,
  P60DOCK_DOCK_VCC_CURRENT,
  // Difference between charge and discharge
  P60DOCK_BATTERY_CURRENT,
  P60DOCK_BATTERY_VOLTAGE,
  P60DOCK_BATTERY_TEMPERATURE_1,
  P60DOCK_BATTERY_TEMPERATURE_2,
  DEVICES_TYPE,
  DEVICES_STATUS,
  P60DOCK_DEVICE_TYPE_GROUP,
  P60DOCK_DEVICE_STATUS_GROUP,
  P60DOCK_DEARM_STATUS,
  P60DOCK_WDT_CNT_GND,
  P60DOCK_WDT_CNT_I2C,
  P60DOCK_WDT_CNT_CAN,
  P60DOCK_WDT_CNT_CSP_1,
  P60DOCK_WDT_CNT_CSP_2,
  P60DOCK_WDT_GND_LEFT,
  P60DOCK_WDT_I2C_LEFT,
  P60DOCK_WDT_CAN_LEFT,
  P60DOCK_WDT_CSP_LEFT_1,
  P60DOCK_WDT_CSP_LEFT_2,
  P60DOCK_BATT_CHARGE_CURRENT,
  P60DOCK_BATT_DISCHARGE_CURRENT,
  P60DOCK_ANT6_DEPL,
  P60DOCK_AR6_DEPL,

  // IDs for both PDUs
  PDU_CURRENTS,
  PDU_VOLTAGES,
  PDU_VCC,
  PDU_VBAT,
  PDU_TEMPERATURE,
  PDU_CONV_EN,
  PDU_OUT_ENABLE,
  PDU_BOOTCAUSE,
  PDU_BOOTCNT,
  PDU_UPTIME,
  PDU_RESETCAUSE,
  PDU_BATT_MODE,
  PDU_LATCHUPS,
  PDU_DEVICES,
  PDU_STATUSES,
  PDU_WDT_CNT_GND,
  PDU_WDT_CNT_I2C,
  PDU_WDT_CNT_CAN,
  PDU_WDT_CNT_CSP1,
  PDU_WDT_CNT_CSP2,
  PDU_WDT_GND_LEFT,
  PDU_WDT_I2C_LEFT,
  PDU_WDT_CAN_LEFT,
  PDU_WDT_CSP_LEFT1,
  PDU_WDT_CSP_LEFT2,

  /** ACU Ids */
  ACU_CURRENT_IN_CHANNELS,
  ACU_VOLTAGE_IN_CHANNELS,
  ACU_VCC,
  ACU_VBAT,
  ACU_TEMPERATURES,
  ACU_MPPT_MODE,
  ACU_VBOOST_IN_CHANNELS,
  ACU_POWER_IN_CHANNELS,
  ACU_DAC_ENABLES,
  ACU_DAC_RAW_CHANNELS,
  ACU_BOOTCAUSE,
  ACU_BOOTCNT,
  ACU_UPTIME,
  ACU_RESET_CAUSE,
  ACU_MPPT_TIME,
  ACU_MPPT_PERIOD,
  ACU_DEVICES,
  ACU_DEVICES_STATUS,
  ACU_WDT_CNT_GND,
  ACU_WDT_GND_LEFT,
};
}
}  // namespace P60System

namespace P60Dock {

static constexpr uint8_t NUM_DEVS = 8;

namespace hk {

enum Index : uint8_t {
  ACU_VCC = 0,
  PDU1_VCC = 1,
  X3_IDLE_VCC = 2,
  PDU2_VCC = 3,
  ACU_VBAT = 4,
  PDU1_VBAT = 5,
  X3_IDLE_VBAT = 6,
  PDU2_VBAT = 7,
  STACK_VBAT = 8,
  STACK_3V3 = 9,
  STACK_5V = 10,
  GS3V3 = 11,
  GS5V = 12,
  CHNLS_LEN = 13
};

}

enum SwitchChannels : uint8_t {
  ACU = 0,
  PDU1 = 1,
  X3_IDLE = 2,
  PDU2_VCC = 3,
  ACU_VBAT = 4,
  PDU1_VBAT = 5,
  X3_IDLE_VBAT = 6,
  PDU2_VBAT = 7,
  STACK_VBAT = 8,
  STACK_3V3 = 9,
  STACK_5V = 10,
  GS3V3 = 11,
  GS5V = 12
};

/** Max reply size reached when requesting full hk table */
static const uint16_t MAX_REPLY_LENGTH = 407;

static const uint16_t MAX_CONFIGTABLE_ADDRESS = 408;
static const uint16_t MAX_HKTABLE_ADDRESS = 187;
static const uint16_t HK_TABLE_SIZE = 188;

static const uint8_t HK_TABLE_ENTRIES = 100;

/**
 * Requesting the full housekeeping table from the P60 dock will generate a reply comprising
 * 402 bytes of data.
 */
static const uint16_t HK_TABLE_REPLY_SIZE = 407;

class CoreHkSet : public StaticLocalDataSet<16> {
 public:
  CoreHkSet(HasLocalDataPoolIF* owner)
      : StaticLocalDataSet(owner, static_cast<uint32_t>(::P60System::SetIds::P60_CORE)) {}

  CoreHkSet(object_id_t objectId)
      : StaticLocalDataSet(sid_t(objectId, static_cast<uint32_t>(::P60System::SetIds::P60_CORE))) {}

  /** Measured output currents */
  lp_vec_t<int16_t, P60Dock::hk::Index::CHNLS_LEN> currents =
      lp_vec_t<int16_t, P60Dock::hk::Index::CHNLS_LEN>(sid.objectId, P60System::pool::P60_CURRENTS,
                                                       this);

  /** Measured output voltages */
  lp_vec_t<uint16_t, P60Dock::hk::Index::CHNLS_LEN> voltages =
      lp_vec_t<uint16_t, P60Dock::hk::Index::CHNLS_LEN>(sid.objectId, P60System::pool::P60_VOLTAGES,
                                                        this);

  /** Output enable states */
  lp_vec_t<uint8_t, P60Dock::hk::Index::CHNLS_LEN> outputEnables =
      lp_vec_t<uint8_t, P60Dock::hk::Index::CHNLS_LEN>(sid.objectId,
                                                       P60System::pool::P60_OUTPUT_ENABLE, this);
  lp_var_t<uint32_t> bootCount =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_BOOT_CNT, this);
  lp_var_t<uint8_t> battMode =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::P60DOCK_BATT_MODE, this);

  // Difference between charge and discharge current
  lp_var_t<int16_t> batteryCurrent =
      lp_var_t<int16_t>(sid.objectId, P60System::pool::P60DOCK_BATTERY_CURRENT, this);
  lp_var_t<uint16_t> batteryVoltage =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::P60DOCK_BATTERY_VOLTAGE, this);

  lp_var_t<float> temperature1 =
      lp_var_t<float>(sid.objectId, P60System::pool::P60DOCK_TEMPERATURE_1, this);
  lp_var_t<float> temperature2 =
      lp_var_t<float>(sid.objectId, P60System::pool::P60DOCK_TEMPERATURE_2, this);
};
/**
 * @brief   This class defines a dataset for the hk table of the P60 Dock.
 * @details
 * The GS port and X3 are not required for EIVE. X3 is another slot on the P60 dock and
 * GS is required for a module from Gomspace which is not used.
 */
class HkTableDataset : public StaticLocalDataSet<32> {
 public:
  HkTableDataset(HasLocalDataPoolIF* owner)
      : StaticLocalDataSet(owner, static_cast<uint32_t>(::P60System::SetIds::P60_AUX)) {}

  HkTableDataset(object_id_t objectId)
      : StaticLocalDataSet(sid_t(objectId, static_cast<uint32_t>(::P60System::SetIds::P60_AUX))) {}

  /** Number of detected latchups on each output channel */
  lp_vec_t<uint16_t, P60Dock::hk::Index::CHNLS_LEN> latchups =
      lp_vec_t<uint16_t, P60Dock::hk::Index::CHNLS_LEN>(sid.objectId, P60System::pool::LATCHUPS,
                                                        this);

  lp_var_t<uint32_t> bootcause =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_BOOT_CAUSE, this);
  lp_var_t<uint32_t> uptime =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_UPTIME, this);
  lp_var_t<uint16_t> resetcause =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::P60DOCK_RESETCAUSE, this);

  /** Battery heater control only possible on BP4 packs */
  lp_var_t<uint8_t> heaterOn =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::P60DOCK_HEATER_ON, this);
  lp_var_t<uint8_t> converter5VStatus =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::P60DOCK_CONV_5V_ENABLE_STATUS, this);

  lp_var_t<uint16_t> dockVbatVoltageValue =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::P60DOCK_DOCK_VBAT, this);
  lp_var_t<int16_t> dockVccCurrent =
      lp_var_t<int16_t>(sid.objectId, P60System::pool::P60DOCK_DOCK_VCC_CURRENT, this);

  lp_var_t<int16_t> batteryTemperature1 =
      lp_var_t<int16_t>(sid.objectId, P60System::pool::P60DOCK_BATTERY_TEMPERATURE_1, this);
  lp_var_t<int16_t> batteryTemperature2 =
      lp_var_t<int16_t>(sid.objectId, P60System::pool::P60DOCK_BATTERY_TEMPERATURE_2, this);

  lp_var_t<uint8_t> dearmStatus =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::P60DOCK_DEARM_STATUS, this);

  /** Number of reboots due to gnd, i2c, csp watchdog timeout */
  lp_var_t<uint32_t> wdtCntGnd =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CNT_GND, this);
  lp_var_t<uint32_t> wdtCntI2c =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CNT_I2C, this);
  lp_var_t<uint32_t> wdtCntCan =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CNT_CAN, this);
  lp_var_t<uint32_t> wdtCntCsp1 =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CNT_CSP_1, this);
  lp_var_t<uint32_t> wdtCntCsp2 =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CNT_CSP_2, this);

  lp_var_t<uint32_t> wdtGndLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_GND_LEFT, this);
  lp_var_t<uint32_t> wdtI2cLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_I2C_LEFT, this);
  lp_var_t<uint32_t> wdtCanLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CAN_LEFT, this);
  lp_var_t<uint8_t> wdtCspLeft1 =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CSP_LEFT_1, this);
  lp_var_t<uint8_t> wdtCspLeft2 =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::P60DOCK_WDT_CSP_LEFT_2, this);
  lp_var_t<int16_t> batteryChargeCurrent =
      lp_var_t<int16_t>(sid.objectId, P60System::pool::P60DOCK_BATT_CHARGE_CURRENT, this);
  lp_var_t<int16_t> batteryDischargeCurrent =
      lp_var_t<int16_t>(sid.objectId, P60System::pool::P60DOCK_BATT_DISCHARGE_CURRENT, this);
  lp_var_t<int8_t> ant6Depl =
      lp_var_t<int8_t>(sid.objectId, P60System::pool::P60DOCK_ANT6_DEPL, this);
  lp_var_t<int8_t> ar6Depl =
      lp_var_t<int8_t>(sid.objectId, P60System::pool::P60DOCK_AR6_DEPL, this);

  lp_vec_t<uint8_t, P60Dock::NUM_DEVS> devicesType =
      lp_vec_t<uint8_t, P60Dock::NUM_DEVS>(sid.objectId, P60System::pool::DEVICES_TYPE, this);
  lp_vec_t<uint8_t, P60Dock::NUM_DEVS> devicesStatus =
      lp_vec_t<uint8_t, P60Dock::NUM_DEVS>(sid.objectId, P60System::pool::DEVICES_STATUS, this);
};
}  // namespace P60Dock

/**
 * @brief   Constants common for both PDU1 and PDU2.
 */
namespace PDU {
/** When retrieving full configuration parameter table */
static const uint16_t MAX_REPLY_LENGTH = 318;
static const uint16_t MAX_CONFIGTABLE_ADDRESS = 316;
static const uint16_t MAX_HKTABLE_ADDRESS = 141;
/** The size of the csp reply containing the housekeeping table data */
static const uint16_t HK_TABLE_REPLY_SIZE = 303;
static const uint8_t HK_TABLE_ENTRIES = 73;

static constexpr uint8_t CHANNELS_LEN = 9;
static constexpr uint8_t DEVICES_NUM = 8;

class PduCoreHk : public StaticLocalDataSet<9> {
 public:
  PduCoreHk(HasLocalDataPoolIF* owner, uint32_t setId) : StaticLocalDataSet(owner, setId) {}

  PduCoreHk(object_id_t objectId, uint32_t setId) : StaticLocalDataSet(sid_t(objectId, setId)) {}

  /** Measured output currents */
  lp_vec_t<int16_t, 9> currents =
      lp_vec_t<int16_t, 9>(sid.objectId, P60System::pool::PDU_CURRENTS, this);
  /** Measured output currents */
  lp_vec_t<int16_t, 9> voltages =
      lp_vec_t<int16_t, 9>(sid.objectId, P60System::pool::PDU_VOLTAGES, this);
  /** Output switch states */
  lp_vec_t<uint8_t, 9> outputEnables =
      lp_vec_t<uint8_t, 9>(sid.objectId, P60System::pool::PDU_OUT_ENABLE, this);
  /** Number of reboots */
  lp_var_t<uint32_t> bootcount =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_BOOTCNT, this);
  /** Battery mode: 1 = Critical, 2 = Safe, 3 = Normal, 4 = Full */
  lp_var_t<uint8_t> battMode =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::PDU_BATT_MODE, this);
  lp_var_t<float> temperature =
      lp_var_t<float>(sid.objectId, P60System::pool::PDU_TEMPERATURE, this);
};

/**
 * @brief   This class defines a dataset for the hk table of a PDU
 */
class PduAuxHk : public StaticLocalDataSet<36> {
 public:
  PduAuxHk(HasLocalDataPoolIF* owner, uint32_t setId) : StaticLocalDataSet(owner, setId) {}

  PduAuxHk(object_id_t objectId, uint32_t setId) : StaticLocalDataSet(sid_t(objectId, setId)) {}

  /** Measured VCC */
  lp_var_t<int16_t> vcc = lp_var_t<int16_t>(sid.objectId, P60System::pool::PDU_VCC, this);
  /** Measured VBAT */
  lp_var_t<int16_t> vbat = lp_var_t<int16_t>(sid.objectId, P60System::pool::PDU_VBAT, this);

  /** Output converter enable status */
  lp_vec_t<uint8_t, 3> converterEnable =
      lp_vec_t<uint8_t, 3>(sid.objectId, P60System::pool::PDU_CONV_EN, this);

  lp_var_t<uint32_t> bootcause =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_BOOTCAUSE, this);

  /** Uptime in seconds */
  lp_var_t<uint32_t> uptime = lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_UPTIME, this);
  lp_var_t<uint16_t> resetcause =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::PDU_RESETCAUSE, this);

  /** Number of detected latchups on each output channel */
  lp_vec_t<uint16_t, 9> latchups =
      lp_vec_t<uint16_t, 9>(sid.objectId, P60System::pool::PDU_LATCHUPS, this);

  /**
   * There are 8 devices on the PDU. FRAM, ADCs, temperature sensor etc. Each device is
   * identified by an ID. Refer also to gs-man-nanopower-p60-pdu-200-1.pdf on pages 17 and 18.
   */
  lp_vec_t<uint8_t, 8> deviceTypes =
      lp_vec_t<uint8_t, 8>(sid.objectId, P60System::pool::PDU_DEVICES, this);
  /** The status of each device. 0 = None, 1 = Ok, 2 = Error, 3 = Not found */
  lp_vec_t<uint8_t, 8> devicesStatus =
      lp_vec_t<uint8_t, 8>(sid.objectId, P60System::pool::PDU_STATUSES, this);

  /** Number of reboots triggered by the ground watchdog */
  lp_var_t<uint32_t> gndWdtReboots =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_CNT_GND, this);
  /** Number of reboots triggered through the I2C watchdog. Not relevant for EIVE. */
  lp_var_t<uint32_t> i2cWdtReboots =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_CNT_I2C, this);
  /** Number of reboots triggered through the CAN watchdog */
  lp_var_t<uint32_t> canWdtReboots =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_CNT_CAN, this);
  /** Number of reboots triggered through the CSP watchdog */
  lp_var_t<uint32_t> csp1WdtReboots =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_CNT_CSP1, this);
  lp_var_t<uint32_t> csp2WdtReboots =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_CNT_CSP2, this);
  /** Ground watchdog remaining seconds before rebooting */
  lp_var_t<uint32_t> groundWatchdogSecondsLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_GND_LEFT, this);
  /** I2C watchdog remaining seconds before rebooting. Not relevant for EIVE. */
  lp_var_t<uint32_t> i2cWatchdogSecondsLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_I2C_LEFT, this);
  /** CAN watchdog remaining seconds before rebooting. */
  lp_var_t<uint32_t> canWatchdogSecondsLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::PDU_WDT_CAN_LEFT, this);
  /** CSP watchdogs remaining pings before rebooting. */
  lp_var_t<uint8_t> csp2WatchdogPingsLeft =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::PDU_WDT_CSP_LEFT1, this);
  lp_var_t<uint8_t> csp1WatchdogPingsLeft =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::PDU_WDT_CSP_LEFT2, this);
};

}  // namespace PDU

namespace PDU1 {

enum Channels : uint8_t {
  TCS_BOARD_3V3 = 0,
  SYRLINKS = 1,
  STR = 2,
  MGT = 3,
  SUS_NOMINAL = 4,
  SOL_CELL_EXPERIMENT = 5,
  PLOC = 6,
  ACS_A_SIDE = 7,
  UNUSED = 8,
  LEN = 9
};

/**
 * Addresses within configuration table to enable or disable output channels. Refer also to
 * gs-man-nanopower-p60-pdu-200.pdf on page 16.
 */
static const uint16_t CONFIG_ADDRESS_OUT_EN_TCS_BOARD_3V3 = 0x48;
static const uint16_t CONFIG_ADDRESS_OUT_EN_SYRLINKS = 0x49;
static const uint16_t CONFIG_ADDRESS_OUT_EN_STAR_TRACKER = 0x4A;
static const uint16_t CONFIG_ADDRESS_OUT_EN_MGT = 0x4B;
static const uint16_t CONFIG_ADDRESS_OUT_EN_SUS_NOMINAL = 0x4C;
static const uint16_t CONFIG_ADDRESS_OUT_EN_SOLAR_CELL_EXP = 0x4D;
static const uint16_t CONFIG_ADDRESS_OUT_EN_PLOC = 0x4E;
static const uint16_t CONFIG_ADDRESS_OUT_EN_ACS_BOARD_SIDE_A = 0x4F;
static const uint16_t CONFIG_ADDRESS_OUT_EN_CHANNEL8 = 0x50;

class Pdu1CoreHk : public ::PDU::PduCoreHk {
 public:
  Pdu1CoreHk(HasLocalDataPoolIF* owner)
      : PduCoreHk(owner, static_cast<uint32_t>(::P60System::SetIds::PDU_1_CORE)) {}

  Pdu1CoreHk(object_id_t objectId)
      : PduCoreHk(objectId, static_cast<uint32_t>(::P60System::SetIds::PDU_1_CORE)) {}
};

class Pdu1AuxHk : public ::PDU::PduAuxHk {
 public:
  Pdu1AuxHk(HasLocalDataPoolIF* owner)
      : PduAuxHk(owner, static_cast<uint32_t>(::P60System::SetIds::PDU_1_AUX)) {}

  Pdu1AuxHk(object_id_t objectId)
      : PduAuxHk(objectId, static_cast<uint32_t>(::P60System::SetIds::PDU_1_AUX)) {}
};

}  // namespace PDU1

namespace PDU2 {

enum Channels : uint8_t {
  Q7S = 0,
  PAYLOAD_PCDU_CH1 = 1,
  RW = 2,
  TCS_HEATER_IN = 3,
  SUS_REDUNDANT = 4,
  DEPY_MECHANISM = 5,
  PAYLOAD_PCDU_CH6 = 6,
  ACS_B_SIDE = 7,
  PAYLOAD_CAMERA = 8,
  LEN = 9
};

/**
 * Addresses within configuration table to enable or disable output channels. Refer also to
 * gs-man-nanopower-p60-pdu-200.pdf on page 16.
 */
static const uint16_t CONFIG_ADDRESS_OUT_EN_Q7S = 0x48;
static const uint16_t CONFIG_ADDRESS_OUT_EN_PAYLOAD_PCDU_CH1 = 0x49;
static const uint16_t CONFIG_ADDRESS_OUT_EN_RW = 0x4A;
static const uint16_t CONFIG_ADDRESS_OUT_EN_TCS_BOARD_HEATER_IN = 0x4B;
static const uint16_t CONFIG_ADDRESS_OUT_EN_SUS_REDUNDANT = 0x4C;
static const uint16_t CONFIG_ADDRESS_OUT_EN_DEPLOYMENT_MECHANISM = 0x4D;
static const uint16_t CONFIG_ADDRESS_OUT_EN_PAYLOAD_PCDU_CH6 = 0x4E;
static const uint16_t CONFIG_ADDRESS_OUT_EN_ACS_BOARD_SIDE_B = 0x4F;
static const uint16_t CONFIG_ADDRESS_OUT_EN_PAYLOAD_CAMERA = 0x50;

class Pdu2CoreHk : public ::PDU::PduCoreHk {
 public:
  Pdu2CoreHk(HasLocalDataPoolIF* owner)
      : PduCoreHk(owner, static_cast<uint32_t>(::P60System::SetIds::PDU_2_CORE)) {}

  Pdu2CoreHk(object_id_t objectId)
      : PduCoreHk(objectId, static_cast<uint32_t>(::P60System::SetIds::PDU_2_CORE)) {}
};

class Pdu2AuxHk : public ::PDU::PduAuxHk {
 public:
  Pdu2AuxHk(HasLocalDataPoolIF* owner)
      : PduAuxHk(owner, static_cast<uint32_t>(::P60System::SetIds::PDU_2_AUX)) {}

  Pdu2AuxHk(object_id_t objectId)
      : PduAuxHk(objectId, static_cast<uint32_t>(::P60System::SetIds::PDU_2_AUX)) {}
};

}  // namespace PDU2

namespace ACU {

/* When receiving full housekeeping (telemetry) table */
static const uint16_t MAX_REPLY_LENGTH = 262;
static const uint16_t MAX_CONFIGTABLE_ADDRESS = 26;
static const uint16_t MAX_HKTABLE_ADDRESS = 120;
static const uint8_t HK_TABLE_ENTRIES = 64;
static const uint16_t HK_TABLE_REPLY_SIZE = 262;

class CoreHk : public StaticLocalDataSet<14> {
 public:
  CoreHk(HasLocalDataPoolIF* owner)
      : StaticLocalDataSet(owner, static_cast<uint32_t>(::P60System::SetIds::ACU_CORE)) {}

  CoreHk(object_id_t objectId)
      : StaticLocalDataSet(sid_t(objectId, static_cast<uint32_t>(::P60System::SetIds::ACU_CORE))) {}

  lp_var_t<uint8_t> mpptMode =
      lp_var_t<uint8_t>(sid.objectId, P60System::pool::ACU_MPPT_MODE, this);

  lp_vec_t<int16_t, 6> currentInChannels =
      lp_vec_t<int16_t, 6>(sid.objectId, P60System::pool::ACU_CURRENT_IN_CHANNELS, this);
  lp_vec_t<uint16_t, 6> voltageInChannels =
      lp_vec_t<uint16_t, 6>(sid.objectId, P60System::pool::ACU_VOLTAGE_IN_CHANNELS, this);

  lp_var_t<uint16_t> vcc = lp_var_t<uint16_t>(sid.objectId, P60System::pool::ACU_VCC, this);
  lp_var_t<uint16_t> vbat = lp_var_t<uint16_t>(sid.objectId, P60System::pool::ACU_VBAT, this);

  lp_vec_t<uint16_t, 6> vboostInChannels =
      lp_vec_t<uint16_t, 6>(sid.objectId, P60System::pool::ACU_VBOOST_IN_CHANNELS, this);
  lp_vec_t<uint16_t, 6> powerInChannels =
      lp_vec_t<uint16_t, 6>(sid.objectId, P60System::pool::ACU_POWER_IN_CHANNELS, this);

  lp_vec_t<float, 3> temperatures =
      lp_vec_t<float, 3>(sid.objectId, P60System::pool::ACU_TEMPERATURES, this);

  lp_var_t<uint32_t> bootcnt = lp_var_t<uint32_t>(sid.objectId, P60System::pool::ACU_BOOTCNT, this);
  lp_var_t<uint32_t> uptime = lp_var_t<uint32_t>(sid.objectId, P60System::pool::ACU_UPTIME, this);
  lp_var_t<uint16_t> mpptTime =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::ACU_MPPT_TIME, this);
  lp_var_t<uint16_t> mpptPeriod =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::ACU_MPPT_PERIOD, this);
};
/**
 * @brief   This class defines a dataset for the hk table of the ACU.
 */
class AuxHk : public StaticLocalDataSet<12> {
 public:
  AuxHk(HasLocalDataPoolIF* owner)
      : StaticLocalDataSet(owner, static_cast<uint32_t>(::P60System::SetIds::ACU_AUX)) {}

  AuxHk(object_id_t objectId)
      : StaticLocalDataSet(sid_t(objectId, static_cast<uint32_t>(::P60System::SetIds::ACU_AUX))) {}

  lp_vec_t<uint8_t, 3> dacEnables =
      lp_vec_t<uint8_t, 3>(sid.objectId, P60System::pool::ACU_DAC_ENABLES, this);

  lp_vec_t<uint16_t, 6> dacRawChannelVals =
      lp_vec_t<uint16_t, 6>(sid.objectId, P60System::pool::ACU_DAC_RAW_CHANNELS, this);

  lp_var_t<uint32_t> bootCause =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::ACU_BOOTCAUSE, this);
  lp_var_t<uint16_t> resetCause =
      lp_var_t<uint16_t>(sid.objectId, P60System::pool::ACU_RESET_CAUSE, this);

  lp_var_t<uint32_t> wdtCntGnd =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::ACU_WDT_CNT_GND, this);
  lp_var_t<uint32_t> wdtGndLeft =
      lp_var_t<uint32_t>(sid.objectId, P60System::pool::ACU_WDT_GND_LEFT, this);

  /**
   * There are 8 devices on the PDU. FRAM, ADCs, temperature sensor etc. Each device is
   * identified by an ID. Refer also to gs-man-nanopower-p60-pdu-200-1.pdf on pages 17 and 18.
   */
  lp_vec_t<uint8_t, 8> deviceTypes =
      lp_vec_t<uint8_t, 8>(sid.objectId, P60System::pool::ACU_DEVICES, this);
  /** The status of each device. 0 = None, 1 = Ok, 2 = Error, 3 = Not found */
  lp_vec_t<uint8_t, 8> devicesStatus =
      lp_vec_t<uint8_t, 8>(sid.objectId, P60System::pool::ACU_DEVICES_STATUS, this);
};
}  // namespace ACU

namespace pcdu {

enum PoolIds : uint32_t { PDU1_SWITCHES, PDU2_SWITCHES };

/* Switches are uint8_t datatype and go from 0 to 255 */
enum Switches : power::Switch_t {
  PDU1_CH0_TCS_BOARD_3V3,
  PDU1_CH1_SYRLINKS_12V,
  PDU1_CH2_STAR_TRACKER_5V,
  PDU1_CH3_MGT_5V,
  PDU1_CH4_SUS_NOMINAL_3V3,
  PDU1_CH5_SOLAR_CELL_EXP_5V,
  PDU1_CH6_PLOC_12V,
  PDU1_CH7_ACS_A_SIDE_3V3,
  PDU1_CH8_UNOCCUPIED,

  PDU2_CH0_Q7S,
  PDU2_CH1_PL_PCDU_BATT_0_14V8,
  PDU2_CH2_RW_5V,
  PDU2_CH3_TCS_BOARD_HEATER_IN_8V,
  PDU2_CH4_SUS_REDUNDANT_3V3,
  PDU2_CH5_DEPLOYMENT_MECHANISM_8V,
  PDU2_CH6_PL_PCDU_BATT_1_14V8,
  PDU2_CH7_ACS_BOARD_SIDE_B_3V3,
  PDU2_CH8_PAYLOAD_CAMERA
};

static constexpr uint8_t NUMBER_OF_SWITCHES = 18;

static const uint8_t ON = 1;
static const uint8_t OFF = 0;

// Output states after reboot of the PDUs

const std::array<uint8_t, PDU::CHANNELS_LEN> INIT_SWITCHES_PDU1 = {
// Because the TE0720 is not connected to the PCDU, this switch is always on
#ifdef TE0720_1CFA
    ON,
#else
    OFF,
#endif
    OFF, OFF, OFF, OFF, OFF, OFF, OFF, OFF,
};
const std::array<uint8_t, PDU::CHANNELS_LEN> INIT_SWITCHES_PDU2 = {ON,  OFF, OFF, OFF, OFF,
                                                                   OFF, OFF, OFF, OFF};

static constexpr uint32_t SWITCHER_SET_ID = 0;

class SwitcherStates : public StaticLocalDataSet<NUMBER_OF_SWITCHES> {
 public:
  SwitcherStates(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, SWITCHER_SET_ID) {}

  SwitcherStates(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, SWITCHER_SET_ID)) {}

  lp_vec_t<uint8_t, PDU::CHANNELS_LEN> pdu1Switches =
      lp_vec_t<uint8_t, PDU::CHANNELS_LEN>(sid.objectId, PDU1_SWITCHES, this);
  lp_vec_t<uint8_t, PDU::CHANNELS_LEN> pdu2Switches =
      lp_vec_t<uint8_t, PDU::CHANNELS_LEN>(sid.objectId, PDU2_SWITCHES, this);
};

}  // namespace pcdu
#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_GOMSPACEDEFINITIONS_H_ */