#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_IMTQDEFINITIONS_H_ #define MISSION_DEVICES_DEVICEDEFINITIONS_IMTQDEFINITIONS_H_ namespace IMTQ { static const DeviceCommandId_t NONE = 0x0; static const DeviceCommandId_t GET_ENG_HK_DATA = 0x1; static const DeviceCommandId_t START_ACTUATION_DIPOLE = 0x2; static const DeviceCommandId_t GET_COMMANDED_DIPOLE = 0x3; /** Generates new measurement of the magnetic field */ static const DeviceCommandId_t START_MTM_MEASUREMENT = 0x4; /** Requests the calibrated magnetometer measurement */ static const DeviceCommandId_t GET_CAL_MTM_MEASUREMENT = 0x5; /** Requests the raw values measured by the built-in MTM XEN1210 */ static const DeviceCommandId_t GET_RAW_MTM_MEASUREMENT = 0x6; static const DeviceCommandId_t POS_X_SELF_TEST = 0x7; static const DeviceCommandId_t NEG_X_SELF_TEST = 0x8; static const DeviceCommandId_t POS_Y_SELF_TEST = 0x9; static const DeviceCommandId_t NEG_Y_SELF_TEST = 0x10; static const DeviceCommandId_t POS_Z_SELF_TEST = 0x11; static const DeviceCommandId_t NEG_Z_SELF_TEST = 0x12; static const DeviceCommandId_t GET_SELF_TEST_RESULT = 0x13; static const uint8_t GET_TEMP_REPLY_SIZE = 2; static const uint8_t CFGR_CMD_SIZE = 3; static const uint8_t POINTER_REG_SIZE = 1; static const uint32_t ENG_HK_DATA_SET_ID = GET_ENG_HK_DATA; static const uint32_t CAL_MTM_SET = GET_CAL_MTM_MEASUREMENT; static const uint32_t SELF_TEST_DATA_SET = GET_SELF_TEST_RESULT; static const uint8_t SIZE_ENG_HK_COMMAND = 1; static const uint8_t SIZE_STATUS_REPLY = 2; static const uint8_t SIZE_ENG_HK_DATA_REPLY = 24; static const uint8_t SIZE_GET_COMMANDED_DIPOLE_REPLY = 8; static const uint8_t SIZE_GET_CAL_MTM_MEASUREMENT = 15; static const uint8_t SIZE_GET_RAW_MTM_MEASUREMENT = 15; static const uint16_t SIZE_SELF_TEST_RESULTS = 320; static const uint16_t MAX_REPLY_SIZE = SIZE_SELF_TEST_RESULTS; static const uint8_t MAX_COMMAND_SIZE = 9; /** Define entries in IMTQ specific dataset */ static const uint8_t ENG_HK_SET_POOL_ENTRIES = 11; static const uint8_t CAL_MTM_POOL_ENTRIES = 4; static const uint8_t SELF_TEST_DATASET_ENTRIES = 104; /** Error codes for interpreting the self test error byte */ static const uint8_t I2C_FAILURE_MASK = 0x1; static const uint8_t SPI_FAILURE_MASK = 0x2; // MTM connectivity static const uint8_t ADC_FAILURE_MASK = 0x4; // Current/Temp measurement static const uint8_t PWM_FAILURE_MASK = 0x8; // Coil actuation static const uint8_t TC_FAILURE_MASK = 0x10; // System failure static const uint8_t MTM_RANGE_FAILURE_MASK = 0x20; // MTM values outside of expected range static const uint8_t COIL_CURRENT_FAILURE_MASK = 0x40; // Coil currents outside of expected range static const uint8_t INVALID_ERROR_BYTE = 0x80; // This is an invalid error byte and should be never replied by the IMTQ static const uint8_t MAIN_STEP_OFFSET = 43; /** * Command code definitions. Each command or reply of an IMTQ request will begin with one of * the following command codes. */ namespace CC { static const uint8_t START_MTM_MEASUREMENT = 0x4; static const uint8_t START_ACTUATION_DIPOLE = 0x6; static const uint8_t SELF_TEST_CMD = 0x8; static const uint8_t SOFTWARE_RESET = 0xAA; static const uint8_t GET_ENG_HK_DATA = 0x4A; static const uint8_t GET_COMMANDED_DIPOLE = 0x46; static const uint8_t GET_RAW_MTM_MEASUREMENT = 0x42; static const uint8_t GET_CAL_MTM_MEASUREMENT = 0x43; static const uint8_t GET_SELF_TEST_RESULT = 0x47; }; namespace SELF_TEST_AXIS { static const uint8_t ALL = 0x0; static const uint8_t X_POSITIVE = 0x1; static const uint8_t X_NEGATIVE = 0x2; static const uint8_t Y_POSITIVE = 0x3; static const uint8_t Y_NEGATIVE = 0x4; static const uint8_t Z_POSITIVE = 0x5; static const uint8_t Z_NEGATIVE = 0x6; } namespace SELF_TEST_STEPS { static const uint8_t INIT = 0x0; static const uint8_t X_POSITIVE = 0x1; static const uint8_t X_NEGATIVE = 0x2; static const uint8_t Y_POSITIVE = 0x3; static const uint8_t Y_NEGATIVE = 0x4; static const uint8_t Z_POSITIVE = 0x5; static const uint8_t Z_NEGATIVE = 0x6; static const uint8_t FINA = 0x7; } enum IMTQPoolIds: lp_id_t { DIGITAL_VOLTAGE_MV, ANALOG_VOLTAGE_MV, DIGITAL_CURRENT, ANALOG_CURRENT, COIL_X_CURRENT, COIL_Y_CURRENT, COIL_Z_CURRENT, COIL_X_TEMPERATURE, COIL_Y_TEMPERATURE, COIL_Z_TEMPERATURE, MCU_TEMPERATURE, MTM_CAL_X, MTM_CAL_Y, MTM_CAL_Z, ACTUATION_CAL_STATUS, MTM_RAW_X, MTM_RAW_Y, MTM_RAW_Z, ACTUATION_RAW_STATUS, INIT_POS_X_ERR, INIT_POS_X_RAW_MAG_X, INIT_POS_X_RAW_MAG_Y, INIT_POS_X_RAW_MAG_Z, INIT_POS_X_CAL_MAG_X, INIT_POS_X_CAL_MAG_Y, INIT_POS_X_CAL_MAG_Z, INIT_POS_X_COIL_X_CURRENT, INIT_POS_X_COIL_Y_CURRENT, INIT_POS_X_COIL_Z_CURRENT, INIT_POS_X_COIL_X_TEMPERATURE, INIT_POS_X_COIL_Y_TEMPERATURE, INIT_POS_X_COIL_Z_TEMPERATURE, INIT_NEG_X_ERR, INIT_NEG_X_RAW_MAG_X, INIT_NEG_X_RAW_MAG_Y, INIT_NEG_X_RAW_MAG_Z, INIT_NEG_X_CAL_MAG_X, INIT_NEG_X_CAL_MAG_Y, INIT_NEG_X_CAL_MAG_Z, INIT_NEG_X_COIL_X_CURRENT, INIT_NEG_X_COIL_Y_CURRENT, INIT_NEG_X_COIL_Z_CURRENT, INIT_NEG_X_COIL_X_TEMPERATURE, INIT_NEG_X_COIL_Y_TEMPERATURE, INIT_NEG_X_COIL_Z_TEMPERATURE, INIT_POS_Y_ERR, INIT_POS_Y_RAW_MAG_X, INIT_POS_Y_RAW_MAG_Y, INIT_POS_Y_RAW_MAG_Z, INIT_POS_Y_CAL_MAG_X, INIT_POS_Y_CAL_MAG_Y, INIT_POS_Y_CAL_MAG_Z, INIT_POS_Y_COIL_X_CURRENT, INIT_POS_Y_COIL_Y_CURRENT, INIT_POS_Y_COIL_Z_CURRENT, INIT_POS_Y_COIL_X_TEMPERATURE, INIT_POS_Y_COIL_Y_TEMPERATURE, INIT_POS_Y_COIL_Z_TEMPERATURE, INIT_NEG_Y_ERR, INIT_NEG_Y_RAW_MAG_X, INIT_NEG_Y_RAW_MAG_Y, INIT_NEG_Y_RAW_MAG_Z, INIT_NEG_Y_CAL_MAG_X, INIT_NEG_Y_CAL_MAG_Y, INIT_NEG_Y_CAL_MAG_Z, INIT_NEG_Y_COIL_X_CURRENT, INIT_NEG_Y_COIL_Y_CURRENT, INIT_NEG_Y_COIL_Z_CURRENT, INIT_NEG_Y_COIL_X_TEMPERATURE, INIT_NEG_Y_COIL_Y_TEMPERATURE, INIT_NEG_Y_COIL_Z_TEMPERATURE, INIT_POS_Z_ERR, INIT_POS_Z_RAW_MAG_X, INIT_POS_Z_RAW_MAG_Y, INIT_POS_Z_RAW_MAG_Z, INIT_POS_Z_CAL_MAG_X, INIT_POS_Z_CAL_MAG_Y, INIT_POS_Z_CAL_MAG_Z, INIT_POS_Z_COIL_X_CURRENT, INIT_POS_Z_COIL_Y_CURRENT, INIT_POS_Z_COIL_Z_CURRENT, INIT_POS_Z_COIL_X_TEMPERATURE, INIT_POS_Z_COIL_Y_TEMPERATURE, INIT_POS_Z_COIL_Z_TEMPERATURE, INIT_NEG_Z_ERR, INIT_NEG_Z_RAW_MAG_X, INIT_NEG_Z_RAW_MAG_Y, INIT_NEG_Z_RAW_MAG_Z, INIT_NEG_Z_CAL_MAG_X, INIT_NEG_Z_CAL_MAG_Y, INIT_NEG_Z_CAL_MAG_Z, INIT_NEG_Z_COIL_X_CURRENT, INIT_NEG_Z_COIL_Y_CURRENT, INIT_NEG_Z_COIL_Z_CURRENT, INIT_NEG_Z_COIL_X_TEMPERATURE, INIT_NEG_Z_COIL_Y_TEMPERATURE, INIT_NEG_Z_COIL_Z_TEMPERATURE, POS_X_ERR, POS_X_RAW_MAG_X, POS_X_RAW_MAG_Y, POS_X_RAW_MAG_Z, POS_X_CAL_MAG_X, POS_X_CAL_MAG_Y, POS_X_CAL_MAG_Z, POS_X_COIL_X_CURRENT, POS_X_COIL_Y_CURRENT, POS_X_COIL_Z_CURRENT, POS_X_COIL_X_TEMPERATURE, POS_X_COIL_Y_TEMPERATURE, POS_X_COIL_Z_TEMPERATURE, NEG_X_ERR, NEG_X_RAW_MAG_X, NEG_X_RAW_MAG_Y, NEG_X_RAW_MAG_Z, NEG_X_CAL_MAG_X, NEG_X_CAL_MAG_Y, NEG_X_CAL_MAG_Z, NEG_X_COIL_X_CURRENT, NEG_X_COIL_Y_CURRENT, NEG_X_COIL_Z_CURRENT, NEG_X_COIL_X_TEMPERATURE, NEG_X_COIL_Y_TEMPERATURE, NEG_X_COIL_Z_TEMPERATURE, POS_Y_ERR, POS_Y_RAW_MAG_X, POS_Y_RAW_MAG_Y, POS_Y_RAW_MAG_Z, POS_Y_CAL_MAG_X, POS_Y_CAL_MAG_Y, POS_Y_CAL_MAG_Z, POS_Y_COIL_X_CURRENT, POS_Y_COIL_Y_CURRENT, POS_Y_COIL_Z_CURRENT, POS_Y_COIL_X_TEMPERATURE, POS_Y_COIL_Y_TEMPERATURE, POS_Y_COIL_Z_TEMPERATURE, NEG_Y_ERR, NEG_Y_RAW_MAG_X, NEG_Y_RAW_MAG_Y, NEG_Y_RAW_MAG_Z, NEG_Y_CAL_MAG_X, NEG_Y_CAL_MAG_Y, NEG_Y_CAL_MAG_Z, NEG_Y_COIL_X_CURRENT, NEG_Y_COIL_Y_CURRENT, NEG_Y_COIL_Z_CURRENT, NEG_Y_COIL_X_TEMPERATURE, NEG_Y_COIL_Y_TEMPERATURE, NEG_Y_COIL_Z_TEMPERATURE, POS_Z_ERR, POS_Z_RAW_MAG_X, POS_Z_RAW_MAG_Y, POS_Z_RAW_MAG_Z, POS_Z_CAL_MAG_X, POS_Z_CAL_MAG_Y, POS_Z_CAL_MAG_Z, POS_Z_COIL_X_CURRENT, POS_Z_COIL_Y_CURRENT, POS_Z_COIL_Z_CURRENT, POS_Z_COIL_X_TEMPERATURE, POS_Z_COIL_Y_TEMPERATURE, POS_Z_COIL_Z_TEMPERATURE, NEG_Z_ERR, NEG_Z_RAW_MAG_X, NEG_Z_RAW_MAG_Y, NEG_Z_RAW_MAG_Z, NEG_Z_CAL_MAG_X, NEG_Z_CAL_MAG_Y, NEG_Z_CAL_MAG_Z, NEG_Z_COIL_X_CURRENT, NEG_Z_COIL_Y_CURRENT, NEG_Z_COIL_Z_CURRENT, NEG_Z_COIL_X_TEMPERATURE, NEG_Z_COIL_Y_TEMPERATURE, NEG_Z_COIL_Z_TEMPERATURE, FINA_POS_X_ERR, FINA_POS_X_RAW_MAG_X, FINA_POS_X_RAW_MAG_Y, FINA_POS_X_RAW_MAG_Z, FINA_POS_X_CAL_MAG_X, FINA_POS_X_CAL_MAG_Y, FINA_POS_X_CAL_MAG_Z, FINA_POS_X_COIL_X_CURRENT, FINA_POS_X_COIL_Y_CURRENT, FINA_POS_X_COIL_Z_CURRENT, FINA_POS_X_COIL_X_TEMPERATURE, FINA_POS_X_COIL_Y_TEMPERATURE, FINA_POS_X_COIL_Z_TEMPERATURE, FINA_NEG_X_ERR, FINA_NEG_X_RAW_MAG_X, FINA_NEG_X_RAW_MAG_Y, FINA_NEG_X_RAW_MAG_Z, FINA_NEG_X_CAL_MAG_X, FINA_NEG_X_CAL_MAG_Y, FINA_NEG_X_CAL_MAG_Z, FINA_NEG_X_COIL_X_CURRENT, FINA_NEG_X_COIL_Y_CURRENT, FINA_NEG_X_COIL_Z_CURRENT, FINA_NEG_X_COIL_X_TEMPERATURE, FINA_NEG_X_COIL_Y_TEMPERATURE, FINA_NEG_X_COIL_Z_TEMPERATURE, FINA_POS_Y_ERR, FINA_POS_Y_RAW_MAG_X, FINA_POS_Y_RAW_MAG_Y, FINA_POS_Y_RAW_MAG_Z, FINA_POS_Y_CAL_MAG_X, FINA_POS_Y_CAL_MAG_Y, FINA_POS_Y_CAL_MAG_Z, FINA_POS_Y_COIL_X_CURRENT, FINA_POS_Y_COIL_Y_CURRENT, FINA_POS_Y_COIL_Z_CURRENT, FINA_POS_Y_COIL_X_TEMPERATURE, FINA_POS_Y_COIL_Y_TEMPERATURE, FINA_POS_Y_COIL_Z_TEMPERATURE, FINA_NEG_Y_ERR, FINA_NEG_Y_RAW_MAG_X, FINA_NEG_Y_RAW_MAG_Y, FINA_NEG_Y_RAW_MAG_Z, FINA_NEG_Y_CAL_MAG_X, FINA_NEG_Y_CAL_MAG_Y, FINA_NEG_Y_CAL_MAG_Z, FINA_NEG_Y_COIL_X_CURRENT, FINA_NEG_Y_COIL_Y_CURRENT, FINA_NEG_Y_COIL_Z_CURRENT, FINA_NEG_Y_COIL_X_TEMPERATURE, FINA_NEG_Y_COIL_Y_TEMPERATURE, FINA_NEG_Y_COIL_Z_TEMPERATURE, FINA_POS_Z_ERR, FINA_POS_Z_RAW_MAG_X, FINA_POS_Z_RAW_MAG_Y, FINA_POS_Z_RAW_MAG_Z, FINA_POS_Z_CAL_MAG_X, FINA_POS_Z_CAL_MAG_Y, FINA_POS_Z_CAL_MAG_Z, FINA_POS_Z_COIL_X_CURRENT, FINA_POS_Z_COIL_Y_CURRENT, FINA_POS_Z_COIL_Z_CURRENT, FINA_POS_Z_COIL_X_TEMPERATURE, FINA_POS_Z_COIL_Y_TEMPERATURE, FINA_POS_Z_COIL_Z_TEMPERATURE, FINA_NEG_Z_ERR, FINA_NEG_Z_RAW_MAG_X, FINA_NEG_Z_RAW_MAG_Y, FINA_NEG_Z_RAW_MAG_Z, FINA_NEG_Z_CAL_MAG_X, FINA_NEG_Z_CAL_MAG_Y, FINA_NEG_Z_CAL_MAG_Z, FINA_NEG_Z_COIL_X_CURRENT, FINA_NEG_Z_COIL_Y_CURRENT, FINA_NEG_Z_COIL_Z_CURRENT, FINA_NEG_Z_COIL_X_TEMPERATURE, FINA_NEG_Z_COIL_Y_TEMPERATURE, FINA_NEG_Z_COIL_Z_TEMPERATURE, }; class EngHkDataset: public StaticLocalDataSet { public: EngHkDataset(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, ENG_HK_DATA_SET_ID) { } EngHkDataset(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, ENG_HK_DATA_SET_ID)) { } lp_var_t digitalVoltageMv = lp_var_t(sid.objectId, DIGITAL_VOLTAGE_MV, this); lp_var_t analogVoltageMv = lp_var_t(sid.objectId, ANALOG_VOLTAGE_MV, this); lp_var_t digitalCurrentmA = lp_var_t(sid.objectId, DIGITAL_CURRENT, this); lp_var_t analogCurrentmA = lp_var_t(sid.objectId, ANALOG_CURRENT, this); lp_var_t coilXCurrentmA = lp_var_t(sid.objectId, COIL_X_CURRENT, this); lp_var_t coilYCurrentmA = lp_var_t(sid.objectId, COIL_Y_CURRENT, this); lp_var_t coilZCurrentmA = lp_var_t(sid.objectId, COIL_Z_CURRENT, this); /** All temperatures in [°C] */ lp_var_t coilXTemperature = lp_var_t(sid.objectId, COIL_X_TEMPERATURE, this); lp_var_t coilYTemperature = lp_var_t(sid.objectId, COIL_Y_TEMPERATURE, this); lp_var_t coilZTemperature = lp_var_t(sid.objectId, COIL_Z_TEMPERATURE, this); lp_var_t mcuTemperature = lp_var_t(sid.objectId, MCU_TEMPERATURE, this); }; /** * @brief This dataset holds the raw MTM measurements. */ class CalibratedMtmMeasurementSet: public StaticLocalDataSet { public: CalibratedMtmMeasurementSet(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, CAL_MTM_SET) { } CalibratedMtmMeasurementSet(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, CAL_MTM_SET)) { } /** The unit of all measurements is nT */ lp_var_t mtmXnT = lp_var_t(sid.objectId, MTM_CAL_X, this); lp_var_t mtmYnT = lp_var_t(sid.objectId, MTM_CAL_Y, this); lp_var_t mtmZnT = lp_var_t(sid.objectId, MTM_CAL_Z, this); /** 1 if coils were actuating during measurement otherwise 0 */ lp_var_t coilActuationStatus = lp_var_t(sid.objectId, ACTUATION_CAL_STATUS, this); }; /** * @brief This dataset holds the last calibrated MTM measurement. */ class RawMtmMeasurementSet: public StaticLocalDataSet { public: RawMtmMeasurementSet(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, CAL_MTM_SET) { } RawMtmMeasurementSet(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, CAL_MTM_SET)) { } /** The unit of all measurements is nT */ lp_var_t mtmXnT = lp_var_t(sid.objectId, MTM_RAW_X, this); lp_var_t mtmYnT = lp_var_t(sid.objectId, MTM_RAW_Y, this); lp_var_t mtmZnT = lp_var_t(sid.objectId, MTM_RAW_Z, this); /** 1 if coils were actuating during measurement otherwise 0 */ lp_var_t coilActuationStatus = lp_var_t(sid.objectId, ACTUATION_RAW_STATUS, this); }; /** * @brief This dataset can be used to store the self test results of the positve X axis test. * * @details Units of measurements: * Currents: [10^-4 A] * Raw MTM data: [7.5 * 10^-9 T] * Calibrated MTM data: [10^-9 T] * Temperature: [°C] * The self test generates for each axis the positive and negative dipole and measures * the magnetic field with the built-in MTM. The procedure of the test is as follows: * 1. All coils off (INIT step) * 2. +X (apply current to generate dipole in positive X direction) * 3. All coils off (FINA step) */ class PosXselfTestSet: public StaticLocalDataSet { public: PosXselfTestSet(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, SELF_TEST_DATA_SET) { } PosXselfTestSet(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, SELF_TEST_DATA_SET)) { } /** INIT block */ lp_var_t initErr = lp_var_t(sid.objectId, INIT_POS_X_ERR, this); lp_var_t initRawMagX = lp_var_t(sid.objectId, INIT_POS_X_RAW_MAG_X, this); lp_var_t initRawMagY = lp_var_t(sid.objectId, INIT_POS_X_RAW_MAG_Y, this); lp_var_t initRawMagZ = lp_var_t(sid.objectId, INIT_POS_X_RAW_MAG_Z, this); lp_var_t initCalMagX = lp_var_t(sid.objectId, INIT_POS_X_CAL_MAG_X, this); lp_var_t initCalMagY = lp_var_t(sid.objectId, INIT_POS_X_CAL_MAG_Y, this); lp_var_t initCalMagZ = lp_var_t(sid.objectId, INIT_POS_X_CAL_MAG_Z, this); lp_var_t initCoilXCurrent = lp_var_t(sid.objectId, INIT_POS_X_COIL_X_CURRENT, this); lp_var_t initCoilYCurrent = lp_var_t(sid.objectId, INIT_POS_X_COIL_Y_CURRENT, this); lp_var_t initCoilZCurrent = lp_var_t(sid.objectId, INIT_POS_X_COIL_Z_CURRENT, this); lp_var_t initCoilXTemperature = lp_var_t(sid.objectId, INIT_POS_X_COIL_X_TEMPERATURE, this); lp_var_t initCoilYTemperature = lp_var_t(sid.objectId, INIT_POS_X_COIL_Y_TEMPERATURE, this); lp_var_t initCoilZTemperature = lp_var_t(sid.objectId, INIT_POS_X_COIL_Z_TEMPERATURE, this); /** +X block */ lp_var_t err = lp_var_t(sid.objectId, POS_X_ERR, this); lp_var_t rawMagX = lp_var_t(sid.objectId, POS_X_RAW_MAG_X, this); lp_var_t rawMagY = lp_var_t(sid.objectId, POS_X_RAW_MAG_Y, this); lp_var_t rawMagZ = lp_var_t(sid.objectId, POS_X_RAW_MAG_Z, this); lp_var_t calMagX = lp_var_t(sid.objectId, POS_X_CAL_MAG_X, this); lp_var_t calMagY = lp_var_t(sid.objectId, POS_X_CAL_MAG_Y, this); lp_var_t calMagZ = lp_var_t(sid.objectId, POS_X_CAL_MAG_Z, this); lp_var_t coilXCurrent = lp_var_t(sid.objectId, POS_X_COIL_X_CURRENT, this); lp_var_t coilYCurrent = lp_var_t(sid.objectId, POS_X_COIL_Y_CURRENT, this); lp_var_t coilZCurrent = lp_var_t(sid.objectId, POS_X_COIL_Z_CURRENT, this); lp_var_t coilXTemperature = lp_var_t(sid.objectId, POS_X_COIL_X_TEMPERATURE, this); lp_var_t coilYTemperature = lp_var_t(sid.objectId, POS_X_COIL_Y_TEMPERATURE, this); lp_var_t coilZTemperature = lp_var_t(sid.objectId, POS_X_COIL_Z_TEMPERATURE, this); /** FINA block */ lp_var_t finaErr = lp_var_t(sid.objectId, FINA_POS_X_ERR, this); lp_var_t finaRawMagX = lp_var_t(sid.objectId, FINA_POS_X_RAW_MAG_X, this); lp_var_t finaRawMagY = lp_var_t(sid.objectId, FINA_POS_X_RAW_MAG_Y, this); lp_var_t finaRawMagZ = lp_var_t(sid.objectId, FINA_POS_X_RAW_MAG_Z, this); lp_var_t finaCalMagX = lp_var_t(sid.objectId, FINA_POS_X_CAL_MAG_X, this); lp_var_t finaCalMagY = lp_var_t(sid.objectId, FINA_POS_X_CAL_MAG_Y, this); lp_var_t finaCalMagZ = lp_var_t(sid.objectId, FINA_POS_X_CAL_MAG_Z, this); lp_var_t finaCoilXCurrent = lp_var_t(sid.objectId, FINA_POS_X_COIL_X_CURRENT, this); lp_var_t finaCoilYCurrent = lp_var_t(sid.objectId, FINA_POS_X_COIL_Y_CURRENT, this); lp_var_t finaCoilZCurrent = lp_var_t(sid.objectId, FINA_POS_X_COIL_Z_CURRENT, this); lp_var_t finaCoilXTemperature = lp_var_t(sid.objectId, FINA_POS_X_COIL_X_TEMPERATURE, this); lp_var_t finaCoilYTemperature = lp_var_t(sid.objectId, FINA_POS_X_COIL_Y_TEMPERATURE, this); lp_var_t finaCoilZTemperature = lp_var_t(sid.objectId, FINA_POS_X_COIL_Z_TEMPERATURE, this); }; /** * @brief This class can be used to ease the generation of an action message commanding the * IMTQHandler to configure the magnettorquer with the desired dipoles. * * @details Deserialize the packet, write the deserialized data to the ipc store and store the * the ipc store address in the action message. */ class CommandDipolePacket : public SerialLinkedListAdapter { public: CommandDipolePacket() { setLinks(); } private: /** * @brief Constructor * * @param xDipole The dipole of the x coil in 10 ^ -4 * Am^2 * @param yDipole The dipole of the y coil in 10 ^ -4 * Am^2 * @param zDipole The dipole of the z coil in 10 ^ -4 * Am^2 * @param duration The duration in milliseconds the dipole will be generated by the coils. * When set to 0, the dipole will be generated until a new dipole actuation * command is sent. */ CommandDipolePacket(uint16_t xDipole, uint16_t yDipole, uint16_t zDipole, uint16_t duration) : xDipole(xDipole), yDipole(yDipole), zDipole(zDipole), duration(duration) { } void setLinks() { setStart(&xDipole); xDipole.setNext(&yDipole); yDipole.setNext(&zDipole); zDipole.setNext(&duration); } SerializeElement xDipole; SerializeElement yDipole; SerializeElement zDipole; SerializeElement duration; }; } #endif /* MISSION_DEVICES_DEVICEDEFINITIONS_IMTQDEFINITIONS_H_ */