#include "ObjectFactory.h" #include "OBSWConfig.h" #include "bsp_q7s/boardtest/Q7STestTask.h" #include "bsp_q7s/callbacks/gnssCallback.h" #include "bsp_q7s/callbacks/pcduSwitchCb.h" #include "bsp_q7s/callbacks/q7sGpioCallbacks.h" #include "bsp_q7s/callbacks/rwSpiCallback.h" #include "bsp_q7s/memory/FileSystemHandler.h" #include "busConf.h" #include "ccsdsConfig.h" #include "devConf.h" #include "devices/addresses.h" #include "devices/gpioIds.h" #include "devices/powerSwitcherList.h" #include "fsfw/ipc/QueueFactory.h" #include "linux/ObjectFactory.h" #include "linux/boardtest/I2cTestClass.h" #include "linux/boardtest/SpiTestClass.h" #include "linux/boardtest/UartTestClass.h" #include "linux/callbacks/gpioCallbacks.h" #include "linux/csp/CspComIF.h" #include "linux/csp/CspCookie.h" #include "linux/devices/GPSHyperionLinuxController.h" #include "linux/devices/devicedefinitions/PlocMPSoCDefinitions.h" #include "linux/devices/devicedefinitions/StarTrackerDefinitions.h" #include "linux/devices/ploc/PlocMPSoCHandler.h" #include "linux/devices/ploc/PlocMPSoCHelper.h" #include "linux/devices/ploc/PlocMemoryDumper.h" #include "linux/devices/ploc/PlocSupervisorHandler.h" #include "linux/devices/startracker/StarTrackerHandler.h" #include "linux/devices/startracker/StrHelper.h" #include "linux/obc/AxiPtmeConfig.h" #include "linux/obc/PapbVcInterface.h" #include "linux/obc/PdecHandler.h" #include "linux/obc/Ptme.h" #include "linux/obc/PtmeConfig.h" #include "mission/system/RwAssembly.h" #include "mission/system/fdir/AcsBoardFdir.h" #include "mission/system/fdir/GomspacePowerFdir.h" #include "mission/system/fdir/RtdFdir.h" #include "mission/system/fdir/SusFdir.h" #include "mission/system/fdir/SyrlinksFdir.h" #include "tmtc/apid.h" #include "tmtc/pusIds.h" #if OBSW_TEST_LIBGPIOD == 1 #include "linux/boardtest/LibgpiodTest.h" #endif #include #include "fsfw/datapoollocal/LocalDataPoolManager.h" #include "fsfw/tmtcpacket/pus/tm.h" #include "fsfw/tmtcservices/CommandingServiceBase.h" #include "fsfw/tmtcservices/PusServiceBase.h" #include "fsfw_hal/common/gpio/GpioCookie.h" #include "fsfw_hal/common/gpio/gpioDefinitions.h" #include "fsfw_hal/devicehandlers/GyroL3GD20Handler.h" #include "fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h" #include "fsfw_hal/devicehandlers/MgmRM3100Handler.h" #include "fsfw_hal/linux/gpio/LinuxLibgpioIF.h" #include "fsfw_hal/linux/i2c/I2cComIF.h" #include "fsfw_hal/linux/i2c/I2cCookie.h" #include "fsfw_hal/linux/spi/SpiComIF.h" #include "fsfw_hal/linux/spi/SpiCookie.h" #include "fsfw_hal/linux/uart/UartComIF.h" #include "fsfw_hal/linux/uart/UartCookie.h" #include "mission/core/GenericFactory.h" #include "mission/devices/ACUHandler.h" #include "mission/devices/BpxBatteryHandler.h" #include "mission/devices/GyroADIS1650XHandler.h" #include "mission/devices/HeaterHandler.h" #include "mission/devices/IMTQHandler.h" #include "mission/devices/Max31865PT1000Handler.h" #include "mission/devices/P60DockHandler.h" #include "mission/devices/PCDUHandler.h" #include "mission/devices/PDU1Handler.h" #include "mission/devices/PDU2Handler.h" #include "mission/devices/PayloadPcduHandler.h" #include "mission/devices/RadiationSensorHandler.h" #include "mission/devices/RwHandler.h" #include "mission/devices/SolarArrayDeploymentHandler.h" #include "mission/devices/SyrlinksHkHandler.h" #include "mission/devices/Tmp1075Handler.h" #include "mission/devices/devicedefinitions/GomspaceDefinitions.h" #include "mission/devices/devicedefinitions/Max31865Definitions.h" #include "mission/devices/devicedefinitions/RadSensorDefinitions.h" #include "mission/devices/devicedefinitions/RwDefinitions.h" #include "mission/devices/devicedefinitions/SyrlinksDefinitions.h" #include "mission/devices/devicedefinitions/payloadPcduDefinitions.h" #include "mission/system/AcsBoardAssembly.h" #include "mission/tmtc/CCSDSHandler.h" #include "mission/tmtc/TmFunnel.h" #include "mission/tmtc/VirtualChannel.h" ResetArgs RESET_ARGS_GNSS; void Factory::setStaticFrameworkObjectIds() { PusServiceBase::packetSource = objects::PUS_PACKET_DISTRIBUTOR; PusServiceBase::packetDestination = objects::TM_FUNNEL; CommandingServiceBase::defaultPacketSource = objects::PUS_PACKET_DISTRIBUTOR; CommandingServiceBase::defaultPacketDestination = objects::TM_FUNNEL; #if OBSW_Q7S_EM == 1 DeviceHandlerBase::powerSwitcherId = objects::NO_OBJECT; #else DeviceHandlerBase::powerSwitcherId = objects::PCDU_HANDLER; #endif /* OBSW_Q7S_EM == 1 */ #if OBSW_TM_TO_PTME == 1 TmFunnel::downlinkDestination = objects::CCSDS_HANDLER; #else TmFunnel::downlinkDestination = objects::TMTC_BRIDGE; #endif /* OBSW_TM_TO_PTME == 1 */ // No storage object for now. TmFunnel::storageDestination = objects::NO_OBJECT; LocalDataPoolManager::defaultHkDestination = objects::PUS_SERVICE_3_HOUSEKEEPING; VerificationReporter::messageReceiver = objects::PUS_SERVICE_1_VERIFICATION; TmPacketBase::timeStamperId = objects::TIME_STAMPER; } void ObjectFactory::setStatics() { Factory::setStaticFrameworkObjectIds(); } void ObjectFactory::createTmpComponents() { I2cCookie* i2cCookieTmp1075tcs1 = new I2cCookie(addresses::TMP1075_TCS_1, TMP1075::MAX_REPLY_LENGTH, q7s::I2C_DEFAULT_DEV); I2cCookie* i2cCookieTmp1075tcs2 = new I2cCookie(addresses::TMP1075_TCS_2, TMP1075::MAX_REPLY_LENGTH, q7s::I2C_DEFAULT_DEV); /* Temperature sensors */ Tmp1075Handler* tmp1075Handler_1 = new Tmp1075Handler(objects::TMP1075_HANDLER_1, objects::I2C_COM_IF, i2cCookieTmp1075tcs1); (void)tmp1075Handler_1; Tmp1075Handler* tmp1075Handler_2 = new Tmp1075Handler(objects::TMP1075_HANDLER_2, objects::I2C_COM_IF, i2cCookieTmp1075tcs2); (void)tmp1075Handler_2; } void ObjectFactory::createCommunicationInterfaces(LinuxLibgpioIF** gpioComIF, UartComIF** uartComIF, SpiComIF** spiMainComIF, I2cComIF** i2cComIF, SpiComIF** spiRWComIF) { if (gpioComIF == nullptr or uartComIF == nullptr or spiMainComIF == nullptr or spiRWComIF == nullptr) { sif::error << "ObjectFactory::createCommunicationInterfaces: Invalid passed ComIF pointer" << std::endl; } *gpioComIF = new LinuxLibgpioIF(objects::GPIO_IF); /* Communication interfaces */ new CspComIF(objects::CSP_COM_IF); *i2cComIF = new I2cComIF(objects::I2C_COM_IF); *uartComIF = new UartComIF(objects::UART_COM_IF); *spiMainComIF = new SpiComIF(objects::SPI_MAIN_COM_IF, q7s::SPI_DEFAULT_DEV, *gpioComIF); *spiRWComIF = new SpiComIF(objects::SPI_RW_COM_IF, q7s::SPI_RW_DEV, *gpioComIF); /* Adding gpios for chip select decoding to the gpioComIf */ q7s::gpioCallbacks::initSpiCsDecoder(*gpioComIF); } void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher) { CspCookie* p60DockCspCookie = new CspCookie(P60Dock::MAX_REPLY_LENGTH, addresses::P60DOCK); CspCookie* pdu1CspCookie = new CspCookie(PDU::MAX_REPLY_LENGTH, addresses::PDU1); CspCookie* pdu2CspCookie = new CspCookie(PDU::MAX_REPLY_LENGTH, addresses::PDU2); CspCookie* acuCspCookie = new CspCookie(ACU::MAX_REPLY_LENGTH, addresses::ACU); auto p60Fdir = new GomspacePowerFdir(objects::P60DOCK_HANDLER); P60DockHandler* p60dockhandler = new P60DockHandler(objects::P60DOCK_HANDLER, objects::CSP_COM_IF, p60DockCspCookie, p60Fdir); auto pdu1Fdir = new GomspacePowerFdir(objects::PDU1_HANDLER); PDU1Handler* pdu1handler = new PDU1Handler(objects::PDU1_HANDLER, objects::CSP_COM_IF, pdu1CspCookie, pdu1Fdir); auto pdu2Fdir = new GomspacePowerFdir(objects::PDU2_HANDLER); PDU2Handler* pdu2handler = new PDU2Handler(objects::PDU2_HANDLER, objects::CSP_COM_IF, pdu2CspCookie, pdu2Fdir); auto acuFdir = new GomspacePowerFdir(objects::ACU_HANDLER); ACUHandler* acuhandler = new ACUHandler(objects::ACU_HANDLER, objects::CSP_COM_IF, acuCspCookie, acuFdir); auto pcduHandler = new PCDUHandler(objects::PCDU_HANDLER, 50); /** * Setting PCDU devices to mode normal immediately after start up because PCDU is always * running. */ p60dockhandler->setModeNormal(); pdu1handler->setModeNormal(); pdu2handler->setModeNormal(); acuhandler->setModeNormal(); if (pwrSwitcher != nullptr) { *pwrSwitcher = pcduHandler; } #if OBSW_DEBUG_P60DOCK == 1 p60dockhandler->setDebugMode(true); #endif #if OBSW_DEBUG_ACU == 1 acuhandler->setDebugMode(true); #endif } void ObjectFactory::createRadSensorComponent(LinuxLibgpioIF* gpioComIF) { using namespace gpio; GpioCookie* gpioCookieRadSensor = new GpioCookie; std::stringstream consumer; consumer << "0x" << std::hex << objects::RAD_SENSOR; GpiodRegularByLineName* gpio = new GpiodRegularByLineName( q7s::gpioNames::RAD_SENSOR_CHIP_SELECT, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieRadSensor->addGpio(gpioIds::CS_RAD_SENSOR, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::ENABLE_RADFET, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieRadSensor->addGpio(gpioIds::ENABLE_RADFET, gpio); gpioChecker(gpioComIF->addGpios(gpioCookieRadSensor), "RAD sensor"); SpiCookie* spiCookieRadSensor = new SpiCookie(addresses::RAD_SENSOR, gpioIds::CS_RAD_SENSOR, RAD_SENSOR::READ_SIZE, spi::DEFAULT_MAX_1227_MODE, spi::DEFAULT_MAX_1227_SPEED); spiCookieRadSensor->setMutexParams(MutexIF::TimeoutType::WAITING, spi::RAD_SENSOR_CS_TIMEOUT); auto radSensor = new RadiationSensorHandler(objects::RAD_SENSOR, objects::SPI_MAIN_COM_IF, spiCookieRadSensor, gpioComIF); static_cast(radSensor); // The radiation sensor ADC is powered by the 5V stack connector which should always be on radSensor->setStartUpImmediately(); // It's a simple sensor, so just to to normal mode immediately radSensor->setToGoToNormalModeImmediately(); #if OBSW_DEBUG_RAD_SENSOR == 1 radSensor->enablePeriodicDataPrint(true); #endif } void ObjectFactory::createAcsBoardComponents(LinuxLibgpioIF* gpioComIF, UartComIF* uartComIF, PowerSwitchIF* pwrSwitcher) { using namespace gpio; GpioCookie* gpioCookieAcsBoard = new GpioCookie(); std::stringstream consumer; GpiodRegularByLineName* gpio = nullptr; consumer << "0x" << std::hex << objects::GYRO_0_ADIS_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GYRO_0_ADIS_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::GYRO_0_ADIS_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GYRO_1_L3G_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GYRO_1_L3G_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::GYRO_1_L3G_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GYRO_2_ADIS_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GYRO_2_ADIS_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::GYRO_2_ADIS_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GYRO_3_L3G_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GYRO_3_L3G_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::GYRO_3_L3G_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::MGM_0_LIS3_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::MGM_0_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::MGM_0_LIS3_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::MGM_1_RM3100_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::MGM_1_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::MGM_1_RM3100_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::MGM_2_LIS3_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::MGM_2_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::MGM_2_LIS3_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::MGM_3_RM3100_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::MGM_3_CS, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::MGM_3_RM3100_CS, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GPS_CONTROLLER; // GNSS reset pins are active low gpio = new GpiodRegularByLineName(q7s::gpioNames::RESET_GNSS_0, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::GNSS_0_NRESET, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GPS_CONTROLLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::RESET_GNSS_1, consumer.str(), Direction::OUT, Levels::HIGH); gpioCookieAcsBoard->addGpio(gpioIds::GNSS_1_NRESET, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GYRO_0_ADIS_HANDLER; // Enable pins must be pulled low for regular operations gpio = new GpiodRegularByLineName(q7s::gpioNames::GYRO_0_ENABLE, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieAcsBoard->addGpio(gpioIds::GYRO_0_ENABLE, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GYRO_2_ADIS_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GYRO_2_ENABLE, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieAcsBoard->addGpio(gpioIds::GYRO_2_ENABLE, gpio); // Enable pins for GNSS consumer.str(""); consumer << "0x" << std::hex << objects::GPS_CONTROLLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GNSS_0_ENABLE, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieAcsBoard->addGpio(gpioIds::GNSS_0_ENABLE, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::GPS_CONTROLLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GNSS_1_ENABLE, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieAcsBoard->addGpio(gpioIds::GNSS_1_ENABLE, gpio); // Select pin. 0 for GPS side A, 1 for GPS side B consumer.str(""); consumer << "0x" << std::hex << objects::GPS_CONTROLLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::GNSS_SELECT, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieAcsBoard->addGpio(gpioIds::GNSS_SELECT, gpio); gpioChecker(gpioComIF->addGpios(gpioCookieAcsBoard), "ACS Board"); AcsBoardFdir* fdir = nullptr; static_cast(fdir); #if OBSW_ADD_ACS_HANDLERS == 1 std::string spiDev = q7s::SPI_DEFAULT_DEV; SpiCookie* spiCookie = new SpiCookie(addresses::MGM_0_LIS3, gpioIds::MGM_0_LIS3_CS, MGMLIS3MDL::MAX_BUFFER_SIZE, spi::DEFAULT_LIS3_MODE, spi::DEFAULT_LIS3_SPEED); auto mgmLis3Handler = new MgmLIS3MDLHandler(objects::MGM_0_LIS3_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, spi::LIS3_TRANSITION_DELAY); fdir = new AcsBoardFdir(objects::MGM_0_LIS3_HANDLER); mgmLis3Handler->setCustomFdir(fdir); static_cast(mgmLis3Handler); #if OBSW_TEST_ACS == 1 mgmLis3Handler->setStartUpImmediately(); mgmLis3Handler->setToGoToNormalMode(true); #endif #if OBSW_DEBUG_ACS == 1 mgmLis3Handler->enablePeriodicPrintouts(true, 10); #endif spiCookie = new SpiCookie(addresses::MGM_1_RM3100, gpioIds::MGM_1_RM3100_CS, RM3100::MAX_BUFFER_SIZE, spi::DEFAULT_RM3100_MODE, spi::DEFAULT_RM3100_SPEED); auto mgmRm3100Handler = new MgmRM3100Handler(objects::MGM_1_RM3100_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, spi::RM3100_TRANSITION_DELAY); fdir = new AcsBoardFdir(objects::MGM_1_RM3100_HANDLER); mgmRm3100Handler->setCustomFdir(fdir); mgmRm3100Handler->setParent(objects::ACS_BOARD_ASS); static_cast(mgmRm3100Handler); #if OBSW_TEST_ACS == 1 mgmRm3100Handler->setStartUpImmediately(); mgmRm3100Handler->setToGoToNormalMode(true); #endif #if OBSW_DEBUG_ACS == 1 mgmRm3100Handler->enablePeriodicPrintouts(true, 10); #endif spiCookie = new SpiCookie(addresses::MGM_2_LIS3, gpioIds::MGM_2_LIS3_CS, MGMLIS3MDL::MAX_BUFFER_SIZE, spi::DEFAULT_LIS3_MODE, spi::DEFAULT_LIS3_SPEED); mgmLis3Handler = new MgmLIS3MDLHandler(objects::MGM_2_LIS3_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, spi::LIS3_TRANSITION_DELAY); fdir = new AcsBoardFdir(objects::MGM_2_LIS3_HANDLER); mgmLis3Handler->setCustomFdir(fdir); mgmLis3Handler->setParent(objects::ACS_BOARD_ASS); static_cast(mgmLis3Handler); #if OBSW_TEST_ACS == 1 mgmLis3Handler->setStartUpImmediately(); mgmLis3Handler->setToGoToNormalMode(true); #endif #if OBSW_DEBUG_ACS == 1 mgmLis3Handler->enablePeriodicPrintouts(true, 10); #endif spiCookie = new SpiCookie(addresses::MGM_3_RM3100, gpioIds::MGM_3_RM3100_CS, RM3100::MAX_BUFFER_SIZE, spi::DEFAULT_RM3100_MODE, spi::DEFAULT_RM3100_SPEED); mgmRm3100Handler = new MgmRM3100Handler(objects::MGM_3_RM3100_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, spi::RM3100_TRANSITION_DELAY); fdir = new AcsBoardFdir(objects::MGM_3_RM3100_HANDLER); mgmRm3100Handler->setCustomFdir(fdir); mgmRm3100Handler->setParent(objects::ACS_BOARD_ASS); #if OBSW_TEST_ACS == 1 mgmRm3100Handler->setStartUpImmediately(); mgmRm3100Handler->setToGoToNormalMode(true); #endif #if OBSW_DEBUG_ACS == 1 mgmRm3100Handler->enablePeriodicPrintouts(true, 10); #endif // Commented until ACS board V2 in in clean room again // Gyro 0 Side A spiCookie = new SpiCookie(addresses::GYRO_0_ADIS, gpioIds::GYRO_0_ADIS_CS, ADIS1650X::MAXIMUM_REPLY_SIZE, spi::DEFAULT_ADIS16507_MODE, spi::DEFAULT_ADIS16507_SPEED); auto adisHandler = new GyroADIS1650XHandler(objects::GYRO_0_ADIS_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, ADIS1650X::Type::ADIS16505); fdir = new AcsBoardFdir(objects::GYRO_0_ADIS_HANDLER); adisHandler->setCustomFdir(fdir); adisHandler->setParent(objects::ACS_BOARD_ASS); static_cast(adisHandler); #if OBSW_TEST_ACS == 1 adisHandler->setStartUpImmediately(); adisHandler->setToGoToNormalModeImmediately(); #endif #if OBSW_DEBUG_ACS == 1 adisHandler->enablePeriodicPrintouts(true, 10); #endif // Gyro 1 Side A spiCookie = new SpiCookie(addresses::GYRO_1_L3G, gpioIds::GYRO_1_L3G_CS, L3GD20H::MAX_BUFFER_SIZE, spi::DEFAULT_L3G_MODE, spi::DEFAULT_L3G_SPEED); auto gyroL3gHandler = new GyroHandlerL3GD20H( objects::GYRO_1_L3G_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, spi::L3G_TRANSITION_DELAY); fdir = new AcsBoardFdir(objects::GYRO_1_L3G_HANDLER); gyroL3gHandler->setCustomFdir(fdir); gyroL3gHandler->setParent(objects::ACS_BOARD_ASS); static_cast(gyroL3gHandler); #if OBSW_TEST_ACS == 1 gyroL3gHandler->setStartUpImmediately(); gyroL3gHandler->setToGoToNormalMode(true); #endif #if OBSW_DEBUG_ACS == 1 gyroL3gHandler->enablePeriodicPrintouts(true, 10); #endif // Gyro 2 Side B spiCookie = new SpiCookie(addresses::GYRO_2_ADIS, gpioIds::GYRO_2_ADIS_CS, ADIS1650X::MAXIMUM_REPLY_SIZE, spi::DEFAULT_ADIS16507_MODE, spi::DEFAULT_ADIS16507_SPEED); adisHandler = new GyroADIS1650XHandler(objects::GYRO_2_ADIS_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, ADIS1650X::Type::ADIS16505); fdir = new AcsBoardFdir(objects::GYRO_2_ADIS_HANDLER); adisHandler->setCustomFdir(fdir); adisHandler->setParent(objects::ACS_BOARD_ASS); #if OBSW_TEST_ACS == 1 adisHandler->setStartUpImmediately(); adisHandler->setToGoToNormalModeImmediately(); #endif // Gyro 3 Side B spiCookie = new SpiCookie(addresses::GYRO_3_L3G, gpioIds::GYRO_3_L3G_CS, L3GD20H::MAX_BUFFER_SIZE, spi::DEFAULT_L3G_MODE, spi::DEFAULT_L3G_SPEED); gyroL3gHandler = new GyroHandlerL3GD20H(objects::GYRO_3_L3G_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, spi::L3G_TRANSITION_DELAY); fdir = new AcsBoardFdir(objects::GYRO_3_L3G_HANDLER); gyroL3gHandler->setCustomFdir(fdir); gyroL3gHandler->setParent(objects::ACS_BOARD_ASS); #if OBSW_TEST_ACS == 1 gyroL3gHandler->setStartUpImmediately(); gyroL3gHandler->setToGoToNormalMode(true); #endif #if OBSW_DEBUG_ACS == 1 gyroL3gHandler->enablePeriodicPrintouts(true, 10); #endif bool debugGps = false; #if OBSW_DEBUG_GPS == 1 debugGps = true; #endif RESET_ARGS_GNSS.gpioComIF = gpioComIF; RESET_ARGS_GNSS.waitPeriodMs = 100; auto gpsCtrl = new GPSHyperionLinuxController(objects::GPS_CONTROLLER, objects::NO_OBJECT, debugGps); gpsCtrl->setResetPinTriggerFunction(gps::triggerGpioResetPin, &RESET_ARGS_GNSS); AcsBoardHelper acsBoardHelper = AcsBoardHelper( objects::MGM_0_LIS3_HANDLER, objects::MGM_1_RM3100_HANDLER, objects::MGM_2_LIS3_HANDLER, objects::MGM_3_RM3100_HANDLER, objects::GYRO_0_ADIS_HANDLER, objects::GYRO_1_L3G_HANDLER, objects::GYRO_2_ADIS_HANDLER, objects::GYRO_3_L3G_HANDLER, objects::GPS_CONTROLLER); auto acsAss = new AcsBoardAssembly(objects::ACS_BOARD_ASS, objects::NO_OBJECT, pwrSwitcher, acsBoardHelper, gpioComIF); static_cast(acsAss); #endif /* OBSW_ADD_ACS_HANDLERS == 1 */ } void ObjectFactory::createHeaterComponents(GpioIF* gpioIF, PowerSwitchIF* pwrSwitcher, HealthTableIF* healthTable) { using namespace gpio; GpioCookie* heaterGpiosCookie = new GpioCookie; GpiodRegularByLineName* gpio = nullptr; std::stringstream consumer; consumer << "0x" << std::hex << objects::HEATER_HANDLER; /* Pin H2-11 on stack connector */ gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_0, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_0, gpio); /* Pin H2-12 on stack connector */ gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_1, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_1, gpio); /* Pin H2-13 on stack connector */ gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_2, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_2, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_3, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_3, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_4, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_4, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_5, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_5, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_6, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_6, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::HEATER_7, consumer.str(), Direction::OUT, Levels::LOW); heaterGpiosCookie->addGpio(gpioIds::HEATER_7, gpio); gpioIF->addGpios(heaterGpiosCookie); HeaterHelper helper({{ {new HealthDevice(objects::HEATER_0_PLOC_PROC_BRD, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_0}, {new HealthDevice(objects::HEATER_1_PCDU_BRD, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_1}, {new HealthDevice(objects::HEATER_2_ACS_BRD, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_2}, {new HealthDevice(objects::HEATER_3_OBC_BRD, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_3}, {new HealthDevice(objects::HEATER_4_CAMERA, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_4}, {new HealthDevice(objects::HEATER_5_STR, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_5}, {new HealthDevice(objects::HEATER_6_DRO, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_6}, {new HealthDevice(objects::HEATER_7_HPA, MessageQueueIF::NO_QUEUE), gpioIds::HEATER_7}, }}); new HeaterHandler(objects::HEATER_HANDLER, gpioIF, helper, pwrSwitcher, pcdu::Switches::PDU2_CH3_TCS_BOARD_HEATER_IN_8V); } void ObjectFactory::createSolarArrayDeploymentComponents() { using namespace gpio; GpioCookie* solarArrayDeplCookie = new GpioCookie; GpiodRegularByLineName* gpio = nullptr; std::stringstream consumer; consumer << "0x" << std::hex << objects::SOLAR_ARRAY_DEPL_HANDLER; gpio = new GpiodRegularByLineName(q7s::gpioNames::SA_DPL_PIN_0, consumer.str(), Direction::OUT, Levels::LOW); solarArrayDeplCookie->addGpio(gpioIds::DEPLSA1, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::SA_DPL_PIN_1, consumer.str(), Direction::OUT, Levels::LOW); solarArrayDeplCookie->addGpio(gpioIds::DEPLSA2, gpio); // TODO: Find out burn time. For now set to 1000 ms. new SolarArrayDeploymentHandler(objects::SOLAR_ARRAY_DEPL_HANDLER, objects::GPIO_IF, solarArrayDeplCookie, objects::PCDU_HANDLER, pcdu::Switches::PDU2_CH5_DEPLOYMENT_MECHANISM_8V, gpioIds::DEPLSA1, gpioIds::DEPLSA2, 1000); } void ObjectFactory::createSyrlinksComponents(PowerSwitchIF* pwrSwitcher) { UartCookie* syrlinksUartCookie = new UartCookie(objects::SYRLINKS_HK_HANDLER, q7s::UART_SYRLINKS_DEV, uart::SYRLINKS_BAUD, syrlinks::MAX_REPLY_SIZE, UartModes::NON_CANONICAL); syrlinksUartCookie->setParityEven(); auto syrlinksFdir = new SyrlinksFdir(objects::SYRLINKS_HK_HANDLER); auto syrlinksHandler = new SyrlinksHkHandler(objects::SYRLINKS_HK_HANDLER, objects::UART_COM_IF, syrlinksUartCookie, pcdu::PDU1_CH1_SYRLINKS_12V, syrlinksFdir); syrlinksHandler->setPowerSwitcher(pwrSwitcher); #if OBSW_DEBUG_SYRLINKS == 1 syrlinksHandler->setDebugMode(true); #endif } void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF) { using namespace gpio; std::stringstream consumer; #if OBSW_ADD_PLOC_MPSOC == 1 consumer << "0x" << std::hex << objects::PLOC_MPSOC_HANDLER; auto gpioConfigMPSoC = new GpiodRegularByLineName(q7s::gpioNames::ENABLE_MPSOC_UART, consumer.str(), Direction::OUT, Levels::HIGH); auto mpsocGpioCookie = new GpioCookie; mpsocGpioCookie->addGpio(gpioIds::ENABLE_MPSOC_UART, gpioConfigMPSoC); gpioChecker(gpioComIF->addGpios(mpsocGpioCookie), "PLOC MPSoC"); auto mpsocCookie = new UartCookie(objects::PLOC_MPSOC_HANDLER, q7s::UART_PLOC_MPSOC_DEV, uart::PLOC_MPSOC_BAUD, mpsoc::MAX_REPLY_SIZE, UartModes::NON_CANONICAL); mpsocCookie->setNoFixedSizeReply(); auto plocMpsocHelper = new PlocMPSoCHelper(objects::PLOC_MPSOC_HELPER); new PlocMPSoCHandler(objects::PLOC_MPSOC_HANDLER, objects::UART_COM_IF, mpsocCookie, plocMpsocHelper, Gpio(gpioIds::ENABLE_MPSOC_UART, gpioComIF), objects::PLOC_SUPERVISOR_HANDLER); #endif /* OBSW_ADD_PLOC_MPSOC == 1 */ #if OBSW_ADD_PLOC_SUPERVISOR == 1 consumer << "0x" << std::hex << objects::PLOC_SUPERVISOR_HANDLER; auto gpioConfigSupv = new GpiodRegularByLineName(q7s::gpioNames::ENABLE_SUPV_UART, consumer.str(), Direction::OUT, Levels::LOW); auto supvGpioCookie = new GpioCookie; supvGpioCookie->addGpio(gpioIds::ENABLE_SUPV_UART, gpioConfigSupv); gpioComIF->addGpios(supvGpioCookie); auto supervisorCookie = new UartCookie(objects::PLOC_SUPERVISOR_HANDLER, q7s::UART_PLOC_SUPERVSIOR_DEV, uart::PLOC_SUPV_BAUD, supv::MAX_PACKET_SIZE * 20, UartModes::NON_CANONICAL); supervisorCookie->setNoFixedSizeReply(); auto supvHelper = new PlocSupvHelper(objects::PLOC_SUPERVISOR_HELPER); new PlocSupervisorHandler(objects::PLOC_SUPERVISOR_HANDLER, objects::UART_COM_IF, supervisorCookie, Gpio(gpioIds::ENABLE_SUPV_UART, gpioComIF), pcdu::PDU1_CH6_PLOC_12V, supvHelper); #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */ static_cast(consumer); } void ObjectFactory::createReactionWheelComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF* pwrSwitcher) { using namespace gpio; GpioCookie* gpioCookieRw = new GpioCookie; GpioCallback* csRw1 = new GpioCallback("Chip select reaction wheel 1", Direction::OUT, Levels::HIGH, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); gpioCookieRw->addGpio(gpioIds::CS_RW1, csRw1); GpioCallback* csRw2 = new GpioCallback("Chip select reaction wheel 2", Direction::OUT, Levels::HIGH, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); gpioCookieRw->addGpio(gpioIds::CS_RW2, csRw2); GpioCallback* csRw3 = new GpioCallback("Chip select reaction wheel 3", Direction::OUT, Levels::HIGH, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); gpioCookieRw->addGpio(gpioIds::CS_RW3, csRw3); GpioCallback* csRw4 = new GpioCallback("Chip select reaction wheel 4", Direction::OUT, Levels::HIGH, &gpioCallbacks::spiCsDecoderCallback, gpioComIF); gpioCookieRw->addGpio(gpioIds::CS_RW4, csRw4); std::stringstream consumer; GpiodRegularByLineName* gpio = nullptr; consumer << "0x" << std::hex << objects::RW1; gpio = new GpiodRegularByLineName(q7s::gpioNames::EN_RW_1, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieRw->addGpio(gpioIds::EN_RW1, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::RW2; gpio = new GpiodRegularByLineName(q7s::gpioNames::EN_RW_2, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieRw->addGpio(gpioIds::EN_RW2, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::RW3; gpio = new GpiodRegularByLineName(q7s::gpioNames::EN_RW_3, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieRw->addGpio(gpioIds::EN_RW3, gpio); consumer.str(""); consumer << "0x" << std::hex << objects::RW4; gpio = new GpiodRegularByLineName(q7s::gpioNames::EN_RW_4, consumer.str(), Direction::OUT, Levels::LOW); gpioCookieRw->addGpio(gpioIds::EN_RW4, gpio); gpioChecker(gpioComIF->addGpios(gpioCookieRw), "RWs"); #if OBSW_ADD_RW == 1 std::array, 4> rwCookieParams = { {{addresses::RW1, gpioIds::CS_RW1}, {addresses::RW2, gpioIds::CS_RW2}, {addresses::RW3, gpioIds::CS_RW3}, {addresses::RW4, gpioIds::CS_RW4}}}; std::array rwCookies = {}; std::array rwIds = {objects::RW1, objects::RW2, objects::RW3, objects::RW4}; std::array rwGpioIds = {gpioIds::EN_RW1, gpioIds::EN_RW2, gpioIds::EN_RW3, gpioIds::EN_RW4}; std::array rws = {}; for (uint8_t idx = 0; idx < rwCookies.size(); idx++) { rwCookies[idx] = new SpiCookie(rwCookieParams[idx].first, rwCookieParams[idx].second, RwDefinitions::MAX_REPLY_SIZE, spi::RW_MODE, spi::RW_SPEED, &rwSpiCallback::spiCallback, nullptr); rws[idx] = new RwHandler(rwIds[idx], objects::SPI_RW_COM_IF, rwCookies[idx], gpioComIF, rwGpioIds[idx]); rwCookies[idx]->setCallbackArgs(rws[idx]); #if OBSW_TEST_RW == 1 rws[idx]->setStartUpImmediately(); #endif #if OBSW_DEBUG_RW == 1 rws[idx]->setDebugMode(true); #endif } RwHelper rwHelper(rwIds); auto* rwAss = new RwAssembly(objects::RW_ASS, objects::NO_OBJECT, pwrSwitcher, pcdu::Switches::PDU2_CH2_RW_5V, rwHelper); static_cast(rwAss); #endif /* OBSW_ADD_RW == 1 */ } void ObjectFactory::createCcsdsComponents(LinuxLibgpioIF* gpioComIF) { using namespace gpio; // GPIO definitions of signals connected to the virtual channel interfaces of the PTME IP Core GpioCookie* gpioCookiePtmeIp = new GpioCookie; GpiodRegularByLineName* gpio = nullptr; std::stringstream consumer; consumer.str("PAPB VC0"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC0, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC0_PAPB_BUSY, gpio); consumer.str("PAPB VC0"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC0, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC0_PAPB_EMPTY, gpio); consumer.str("PAPB VC 1"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC1, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC1_PAPB_BUSY, gpio); consumer.str(""); consumer.str("PAPB VC 1"); gpioCookiePtmeIp->addGpio(gpioIds::VC1_PAPB_EMPTY, gpio); consumer.str(""); consumer.str("PAPB VC 2"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC2, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC2_PAPB_BUSY, gpio); consumer.str(""); consumer.str("PAPB VC 2"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC2, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC2_PAPB_EMPTY, gpio); consumer.str(""); consumer.str("PAPB VC 3"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC3, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_BUSY, gpio); consumer.str(""); consumer.str("PAPB VC 3"); gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC3, consumer.str()); gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_EMPTY, gpio); gpioChecker(gpioComIF->addGpios(gpioCookiePtmeIp), "PTME PAPB VCs"); // Creating virtual channel interfaces VcInterfaceIF* vc0 = new PapbVcInterface(gpioComIF, gpioIds::VC0_PAPB_BUSY, gpioIds::VC0_PAPB_EMPTY, q7s::UIO_PTME, q7s::uiomapids::PTME_VC0); VcInterfaceIF* vc1 = new PapbVcInterface(gpioComIF, gpioIds::VC1_PAPB_BUSY, gpioIds::VC1_PAPB_EMPTY, q7s::UIO_PTME, q7s::uiomapids::PTME_VC1); VcInterfaceIF* vc2 = new PapbVcInterface(gpioComIF, gpioIds::VC2_PAPB_BUSY, gpioIds::VC2_PAPB_EMPTY, q7s::UIO_PTME, q7s::uiomapids::PTME_VC2); VcInterfaceIF* vc3 = new PapbVcInterface(gpioComIF, gpioIds::VC3_PAPB_BUSY, gpioIds::VC3_PAPB_EMPTY, q7s::UIO_PTME, q7s::uiomapids::PTME_VC3); // Creating ptme object and adding virtual channel interfaces Ptme* ptme = new Ptme(objects::PTME); ptme->addVcInterface(ccsds::VC0, vc0); ptme->addVcInterface(ccsds::VC1, vc1); ptme->addVcInterface(ccsds::VC2, vc2); ptme->addVcInterface(ccsds::VC3, vc3); AxiPtmeConfig* axiPtmeConfig = new AxiPtmeConfig(objects::AXI_PTME_CONFIG, q7s::UIO_PTME, q7s::uiomapids::PTME_CONFIG); PtmeConfig* ptmeConfig = new PtmeConfig(objects::PTME_CONFIG, axiPtmeConfig); #if OBSW_ENABLE_SYRLINKS_TRANSMIT_TIMEOUT == 1 // Set to high value when not sending via syrlinks static const uint32_t TRANSMITTER_TIMEOUT = 86400000; // 1 day #else static const uint32_t TRANSMITTER_TIMEOUT = 900000; // 15 minutes #endif CCSDSHandler* ccsdsHandler = new CCSDSHandler( objects::CCSDS_HANDLER, objects::PTME, objects::CCSDS_PACKET_DISTRIBUTOR, ptmeConfig, gpioComIF, gpioIds::RS485_EN_TX_CLOCK, gpioIds::RS485_EN_TX_DATA, TRANSMITTER_TIMEOUT); VirtualChannel* vc = nullptr; vc = new VirtualChannel(ccsds::VC0, common::VC0_QUEUE_SIZE, objects::CCSDS_HANDLER); ccsdsHandler->addVirtualChannel(ccsds::VC0, vc); vc = new VirtualChannel(ccsds::VC1, common::VC1_QUEUE_SIZE, objects::CCSDS_HANDLER); ccsdsHandler->addVirtualChannel(ccsds::VC1, vc); vc = new VirtualChannel(ccsds::VC2, common::VC2_QUEUE_SIZE, objects::CCSDS_HANDLER); ccsdsHandler->addVirtualChannel(ccsds::VC2, vc); vc = new VirtualChannel(ccsds::VC3, common::VC3_QUEUE_SIZE, objects::CCSDS_HANDLER); ccsdsHandler->addVirtualChannel(ccsds::VC3, vc); GpioCookie* gpioCookiePdec = new GpioCookie; consumer.str(""); consumer << "0x" << std::hex << objects::PDEC_HANDLER; // GPIO also low after linux boot (specified by device-tree) gpio = new GpiodRegularByLineName(q7s::gpioNames::PDEC_RESET, consumer.str(), Direction::OUT, Levels::LOW); gpioCookiePdec->addGpio(gpioIds::PDEC_RESET, gpio); gpioChecker(gpioComIF->addGpios(gpioCookiePdec), "PDEC"); new PdecHandler(objects::PDEC_HANDLER, objects::CCSDS_HANDLER, gpioComIF, gpioIds::PDEC_RESET, q7s::UIO_PDEC_CONFIG_MEMORY, q7s::UIO_PDEC_RAM, q7s::UIO_PDEC_REGISTERS); GpioCookie* gpioRS485Chip = new GpioCookie; gpio = new GpiodRegularByLineName(q7s::gpioNames::RS485_EN_TX_CLOCK, "RS485 Transceiver", Direction::OUT, Levels::LOW); gpioRS485Chip->addGpio(gpioIds::RS485_EN_TX_CLOCK, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::RS485_EN_TX_DATA, "RS485 Transceiver", Direction::OUT, Levels::LOW); gpioRS485Chip->addGpio(gpioIds::RS485_EN_TX_DATA, gpio); // Default configuration enables RX channels (RXEN = LOW) gpio = new GpiodRegularByLineName(q7s::gpioNames::RS485_EN_RX_CLOCK, "RS485 Transceiver", Direction::OUT, Levels::LOW); gpioRS485Chip->addGpio(gpioIds::RS485_EN_RX_CLOCK, gpio); gpio = new GpiodRegularByLineName(q7s::gpioNames::RS485_EN_RX_DATA, "RS485 Transceiver", Direction::OUT, Levels::LOW); gpioRS485Chip->addGpio(gpioIds::RS485_EN_RX_DATA, gpio); gpioChecker(gpioComIF->addGpios(gpioRS485Chip), "RS485 Transceiver"); } void ObjectFactory::createPlPcduComponents(LinuxLibgpioIF* gpioComIF, SpiComIF* spiComIF, PowerSwitchIF* pwrSwitcher) { using namespace gpio; // Create all GPIO components first GpioCookie* plPcduGpios = new GpioCookie; GpiodRegularByLineName* gpio = nullptr; std::string consumer; // Switch pins are active high consumer = "PLPCDU_ENB_VBAT_0"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_VBAT0, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_VBAT0, gpio); consumer = "PLPCDU_ENB_VBAT_1"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_VBAT1, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_VBAT1, gpio); consumer = "PLPCDU_ENB_DRO"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_DRO, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_DRO, gpio); consumer = "PLPCDU_ENB_X8"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_X8, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_X8, gpio); consumer = "PLPCDU_ENB_TX"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_TX, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_TX, gpio); consumer = "PLPCDU_ENB_MPA"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_MPA, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_MPA, gpio); consumer = "PLPCDU_ENB_HPA"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ENABLE_HPA, consumer, Direction::OUT, gpio::Levels::LOW); plPcduGpios->addGpio(gpioIds::PLPCDU_ENB_HPA, gpio); // Chip select pin is active low consumer = "PLPCDU_ADC_CS"; gpio = new GpiodRegularByLineName(q7s::gpioNames::PL_PCDU_ADC_CS, consumer, Direction::OUT, gpio::Levels::HIGH); plPcduGpios->addGpio(gpioIds::PLPCDU_ADC_CS, gpio); gpioChecker(gpioComIF->addGpios(plPcduGpios), "PL PCDU"); SpiCookie* spiCookie = new SpiCookie(addresses::PLPCDU_ADC, gpioIds::PLPCDU_ADC_CS, plpcdu::MAX_ADC_REPLY_SIZE, spi::DEFAULT_MAX_1227_MODE, spi::PL_PCDU_MAX_1227_SPEED); // Create device handler components auto plPcduHandler = new PayloadPcduHandler( objects::PLPCDU_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie, gpioComIF, SdCardManager::instance(), pwrSwitcher, pcdu::Switches::PDU2_CH1_PL_PCDU_BATT_0_14V8, pcdu::Switches::PDU2_CH6_PL_PCDU_BATT_1_14V8, false); spiCookie->setCallbackMode(PayloadPcduHandler::extConvAsTwoCallback, plPcduHandler); // plPcduHandler->enablePeriodicPrintout(true, 5); // static_cast(plPcduHandler); #if OBSW_TEST_PL_PCDU == 1 plPcduHandler->setStartUpImmediately(); #endif #if OBSW_DEBUG_PL_PCDU == 1 plPcduHandler->setToGoToNormalModeImmediately(true); plPcduHandler->enablePeriodicPrintout(true, 10); #endif } void ObjectFactory::createTestComponents(LinuxLibgpioIF* gpioComIF) { new Q7STestTask(objects::TEST_TASK); #if OBSW_ADD_SPI_TEST_CODE == 1 new SpiTestClass(objects::SPI_TEST, gpioComIF); #endif #if OBSW_ADD_I2C_TEST_CODE == 1 new I2cTestClass(objects::I2C_TEST, q7s::I2C_DEFAULT_DEV); #endif #if OBSW_ADD_UART_TEST_CODE == 1 new UartTestClass(objects::UART_TEST); #endif } void ObjectFactory::createStrComponents(PowerSwitchIF* pwrSwitcher) { UartCookie* starTrackerCookie = new UartCookie(objects::STAR_TRACKER, q7s::UART_STAR_TRACKER_DEV, uart::STAR_TRACKER_BAUD, startracker::MAX_FRAME_SIZE * 2 + 2, UartModes::NON_CANONICAL); starTrackerCookie->setNoFixedSizeReply(); StrHelper* strHelper = new StrHelper(objects::STR_HELPER); auto starTracker = new StarTrackerHandler(objects::STAR_TRACKER, objects::UART_COM_IF, starTrackerCookie, strHelper, pcdu::PDU1_CH2_STAR_TRACKER_5V); starTracker->setPowerSwitcher(pwrSwitcher); } void ObjectFactory::createImtqComponents(PowerSwitchIF* pwrSwitcher) { I2cCookie* imtqI2cCookie = new I2cCookie(addresses::IMTQ, IMTQ::MAX_REPLY_SIZE, q7s::I2C_DEFAULT_DEV); auto imtqHandler = new IMTQHandler(objects::IMTQ_HANDLER, objects::I2C_COM_IF, imtqI2cCookie, pcdu::Switches::PDU1_CH3_MGT_5V); imtqHandler->setPowerSwitcher(pwrSwitcher); static_cast(imtqHandler); #if OBSW_TEST_IMTQ == 1 imtqHandler->setStartUpImmediately(); imtqHandler->setToGoToNormal(true); #endif #if OBSW_DEBUG_IMTQ == 1 imtqHandler->setDebugMode(true); #endif } void ObjectFactory::createBpxBatteryComponent() { I2cCookie* bpxI2cCookie = new I2cCookie(addresses::BPX_BATTERY, 100, q7s::I2C_DEFAULT_DEV); BpxBatteryHandler* bpxHandler = new BpxBatteryHandler(objects::BPX_BATT_HANDLER, objects::I2C_COM_IF, bpxI2cCookie); bpxHandler->setStartUpImmediately(); bpxHandler->setToGoToNormalMode(true); #if OBSW_DEBUG_BPX_BATT == 1 bpxHandler->setDebugMode(true); #endif } void ObjectFactory::createMiscComponents() { new FileSystemHandler(objects::FILE_SYSTEM_HANDLER); new PlocMemoryDumper(objects::PLOC_MEMORY_DUMPER); } void ObjectFactory::testAcsBrdAss(AcsBoardAssembly* acsAss) { CommandMessage msg; ModeMessage::setModeMessage(&msg, ModeMessage::CMD_MODE_COMMAND, DeviceHandlerIF::MODE_NORMAL, duallane::A_SIDE); ReturnValue_t result = MessageQueueSenderIF::sendMessage(acsAss->getCommandQueue(), &msg); if (result != HasReturnvaluesIF::RETURN_OK) { sif::warning << "Sending mode command failed" << std::endl; } }