diff --git a/config/events.csv b/config/events.csv
index b4f22cd..994e751 100644
--- a/config/events.csv
+++ b/config/events.csv
@@ -154,15 +154,27 @@
 12109;0x2f4d;ACK_INVALID_APID;LOW;Expected acknowledgement report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
 12110;0x2f4e;EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
 12111;0x2f4f;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
-12200;0x2fa8;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
-12201;0x2fa9;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
-12202;0x2faa;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
-12203;0x2fab;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
-12300;0x300c;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
-12301;0x300d;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
-12302;0x300e;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
-12303;0x300f;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
-12400;0x3070;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
+12200;0x2fa8;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
+12201;0x2fa9;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12202;0x2faa;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12203;0x2fab;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12204;0x2fac;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12205;0x2fad;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12206;0x2fae;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12207;0x2faf;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12208;0x2fb0;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12209;0x2fb1;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12210;0x2fb2;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12211;0x2fb3;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12300;0x300c;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
+12301;0x300d;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
+12302;0x300e;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
+12303;0x300f;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
+12400;0x3070;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
+12401;0x3071;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
+12402;0x3072;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
+12403;0x3073;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
+12500;0x30d4;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
 13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
 13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
 13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
diff --git a/pus_tc/cmd_definitions.py b/pus_tc/cmd_definitions.py
index c6eb1a9..5dff327 100644
--- a/pus_tc/cmd_definitions.py
+++ b/pus_tc/cmd_definitions.py
@@ -387,6 +387,16 @@ def add_pcdu_cmds(cmd_dict: ServiceOpCodeDictT):
         keys=Pdu2OpCodes.SOLAR_ARRAY_DEPL_OFF.value,
         info="PDU2: Switch Solar Array Deployment Off",
     )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=Pdu2OpCodes.PL_CAMERA_ON.value,
+        info="PDU2: Turn payload camera on",
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=Pdu2OpCodes.PL_CAMERA_OFF.value,
+        info="PDU2: Turn payload camera off",
+    )
     add_op_code_entry(
         op_code_dict=op_code_dict,
         keys=GomspaceOpCodes.REQUEST_HK_ONCE.value,
diff --git a/pus_tc/devs/pdu2.py b/pus_tc/devs/pdu2.py
index 0b454ed..db800fa 100644
--- a/pus_tc/devs/pdu2.py
+++ b/pus_tc/devs/pdu2.py
@@ -29,6 +29,8 @@ class Pdu2OpCodes(enum.Enum):
     TCS_HEATER_IN_OFF = "12"
     SOLAR_ARRAY_DEPL_ON = "13"
     SOLAR_ARRAY_DEPL_OFF = "14"
+    PL_CAMERA_ON = "15"
+    PL_CAMERA_OFF = "16"
     # There is not really a point of the on command, the SW can not be commanded if the OBC is off
     Q7S_OFF = "32"
 
@@ -212,6 +214,28 @@ def pack_pdu2_commands(object_id: bytearray, tc_queue: TcQueueT, op_code: str):
             Channel.off,
         )
         tc_queue.appendleft(command.pack_command_tuple())
+    if op_code == Pdu2OpCodes.PL_CAMERA_ON.value:
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PDU2: Turn payload camera on")
+        )
+        command = pack_set_param_command(
+            object_id,
+            PDUConfigTable.out_en_8.parameter_address,
+            PDUConfigTable.out_en_8.parameter_size,
+            Channel.on,
+        )
+        tc_queue.appendleft(command.pack_command_tuple())
+    if op_code == Pdu2OpCodes.PL_CAMERA_OFF.value:
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PDU2: Turn payload camera off")
+        )
+        command = pack_set_param_command(
+            object_id,
+            PDUConfigTable.out_en_8.parameter_address,
+            PDUConfigTable.out_en_8.parameter_size,
+            Channel.off,
+        )
+        tc_queue.appendleft(command.pack_command_tuple())
     if op_code == GomspaceOpCodes.REQUEST_HK_ONCE.value:
         tc_queue.appendleft((QueueCommands.PRINT, "PDU2: Requesting HK Table Once"))
         hk_sid = make_sid(object_id=PDU_2_HANDLER_ID, set_id=SetIds.PDU_2)
diff --git a/pus_tc/devs/ploc_mpsoc.py b/pus_tc/devs/ploc_mpsoc.py
index 9f123c7..cf52a03 100644
--- a/pus_tc/devs/ploc_mpsoc.py
+++ b/pus_tc/devs/ploc_mpsoc.py
@@ -32,6 +32,7 @@ mpsoc_file_dict = {
 sequence_file_dict = {
     MANUAL_INPUT: ["manual input", ""],
     "2": ["0:/EM16/231", "0:/EM16/231"],
+    "3": ["0:/EQ04/E-75", "0:/EQ04/E-75"],
 }
 
 
@@ -233,5 +234,5 @@ def get_sequence_file() -> str:
     if key == MANUAL_INPUT:
         file = input("Ploc MPSoC: Specify absolute name file: ")
     else:
-        file = mpsoc_file_dict[key][1]
+        file = sequence_file_dict[key][1]
     return file