From 9a1a686b9ea3ce718993a3c9c162807929b6a1fb Mon Sep 17 00:00:00 2001 From: Robin Mueller Date: Mon, 23 Oct 2023 16:30:16 +0200 Subject: [PATCH 1/4] PL PCDU param update --- eive_tmtc/pus_tc/procedure_packer.py | 2 +- eive_tmtc/pus_tm/hk_handler.py | 2 +- eive_tmtc/tmtc/{power => payload}/plpcdu.py | 177 +++++++++++++++++--- 3 files changed, 153 insertions(+), 28 deletions(-) rename eive_tmtc/tmtc/{power => payload}/plpcdu.py (73%) diff --git a/eive_tmtc/pus_tc/procedure_packer.py b/eive_tmtc/pus_tc/procedure_packer.py index 36452bc..4ccf291 100644 --- a/eive_tmtc/pus_tc/procedure_packer.py +++ b/eive_tmtc/pus_tc/procedure_packer.py @@ -67,7 +67,7 @@ from eive_tmtc.config.object_ids import ( from eive_tmtc.tmtc.tcs.tmp1075 import pack_tmp1075_test_into from eive_tmtc.tmtc.acs.gps import pack_gps_command from eive_tmtc.tmtc.payload.rad_sensor import pack_rad_sensor_test_into -from eive_tmtc.tmtc.power.plpcdu import pack_pl_pcdu_commands +from eive_tmtc.tmtc.payload.plpcdu import pack_pl_pcdu_commands from eive_tmtc.tmtc.acs.str_img_helper import pack_str_img_helper_command from eive_tmtc.pus_tc.system.proc import pack_proc_commands diff --git a/eive_tmtc/pus_tm/hk_handler.py b/eive_tmtc/pus_tm/hk_handler.py index 461f829..02b3b4e 100644 --- a/eive_tmtc/pus_tm/hk_handler.py +++ b/eive_tmtc/pus_tm/hk_handler.py @@ -6,7 +6,7 @@ from eive_tmtc.tmtc.internal_err_reporter import handle_ier_hk_data from eive_tmtc.tmtc.payload.ploc_mpsoc import handle_ploc_mpsoc_hk_data from eive_tmtc.tmtc.tcs.rtd import RTD_NAMES, handle_rtd_hk from eive_tmtc.tmtc.acs.star_tracker import handle_str_hk_data -from eive_tmtc.tmtc.power.plpcdu import handle_plpcdu_hk +from eive_tmtc.tmtc.payload.plpcdu import handle_plpcdu_hk from eive_tmtc.tmtc.payload.rad_sensor import handle_rad_sensor_data from eive_tmtc.tmtc.acs.sus import handle_sus_hk from eive_tmtc.tmtc.payload.ploc_supervisor import handle_supv_hk_data diff --git a/eive_tmtc/tmtc/power/plpcdu.py b/eive_tmtc/tmtc/payload/plpcdu.py similarity index 73% rename from eive_tmtc/tmtc/power/plpcdu.py rename to eive_tmtc/tmtc/payload/plpcdu.py index 68bbc72..00ec767 100644 --- a/eive_tmtc/tmtc/power/plpcdu.py +++ b/eive_tmtc/tmtc/payload/plpcdu.py @@ -20,7 +20,8 @@ from tmtccmd.tc.pus_11_tc_sched import ( create_enable_tc_sched_cmd, create_time_tagged_cmd, ) -from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode, Subservice +from tmtccmd.pus.s200_fsfw_mode import Subservice +from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode from tmtccmd.tc.pus_20_fsfw_param import ( create_scalar_double_parameter, create_load_param_cmd, @@ -35,18 +36,22 @@ _LOGGER = logging.getLogger(__name__) class OpCode: SWITCH_HPA_ON_PROC = ["0", "proc_hpa"] - SWITCH_ON = ["2", "on"] - SWITCH_OFF = ["3", "off"] - NORMAL_SSR = ["4", "nml_ssr"] - NORMAL_DRO = ["5", "nml_dro"] - NORMAL_X8 = ["6", "nml_x8"] - NORMAL_TX = ["7", "nml_tx"] - NORMAL_MPA = ["8", "nml_mpa"] - NORMAL_HPA = ["9", "nml_hpa"] + SWITCH_ON = "on" + SWITCH_OFF = "off" + NORMAL_SSR = "nml_ssr" + NORMAL_DRO = "nml_dro" + NORMAL_X8 = "nml_x8" + NORMAL_TX = "nml_tx" + NORMAL_MPA = "nml_mpa" + NORMAL_HPA = "nml_hpa" - ENABLE_HK = ["enable_hk"] - DISABLE_HK = ["disable_hk"] - REQ_OS_HK = ["hk_os"] + ENABLE_HK = "enable_hk" + DISABLE_HK = "disable_hk" + REQ_OS_HK = "hk_os" + + UPDATE_I_UPPER_LIMIT = "update_i_upper_limit" + UPDATE_V_LOWER_LIMIT = "update_v_lower_limit" + UPDATE_V_UPPER_LIMIT = "update_v_upper_limit" INJECT_SSR_TO_DRO_FAILURE = ["10", "inject_ssr_dro_fault"] INJECT_DRO_TO_X8_FAILURE = ["11", "inject_dro_x8_fault"] @@ -70,6 +75,9 @@ class Info: SWITCH_HPA_ON_PROC = "Switch HPA on procedure" ENABLE_HK = "Enable HK" DISABLE_HK = "Disable HK" + UPDATE_I_UPPER_LIMIT = "Update upper current parameter" + UPDATE_V_LOWER_LIMIT = "Update lower voltage parameter" + UPDATE_V_UPPER_LIMIT = "Update upper voltage parameter" class SetId(enum.IntEnum): @@ -119,7 +127,7 @@ class SubmodeForNormalMode(enum.IntEnum): ) -class ParamIds(enum.IntEnum): +class ParamId(enum.IntEnum): NEG_V_LOWER_BOUND = 0 NEG_V_UPPER_BOUND = 1 @@ -157,6 +165,15 @@ class ParamIds(enum.IntEnum): INJECT_ALL_ON_FAILURE = 35 +class DevSelect(enum.IntEnum): + SSR_NEG_V = 0 + DRO = 1 + X8 = 2 + TX = 3 + MPA = 4 + HPA = 5 + + @tmtc_definitions_provider def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper): oce = OpCodeEntry() @@ -171,6 +188,9 @@ def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper): oce.add(keys=OpCode.NORMAL_HPA, info=Info.NORMAL_HPA) oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK) oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK) + oce.add(keys=OpCode.UPDATE_V_LOWER_LIMIT, info=Info.UPDATE_V_LOWER_LIMIT) + oce.add(keys=OpCode.UPDATE_V_UPPER_LIMIT, info=Info.UPDATE_V_UPPER_LIMIT) + oce.add(keys=OpCode.UPDATE_I_UPPER_LIMIT, info=Info.UPDATE_I_UPPER_LIMIT) oce.add( keys=OpCode.INJECT_SSR_TO_DRO_FAILURE, info="Inject failure SSR to DRO transition", @@ -198,9 +218,9 @@ def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper): def pack_pl_pcdu_commands( # noqa C901: Complexity is okay here. q: DefaultPusQueueHelper, op_code: str ): # noqa C901: Complexity is okay here. - if op_code in OpCode.SWITCH_ON: + if op_code == OpCode.SWITCH_ON: pack_pl_pcdu_mode_cmd(q=q, info=Info.SWITCH_ON, mode=Mode.ON, submode=0) - if op_code in OpCode.SWITCH_OFF: + if op_code == OpCode.SWITCH_OFF: pack_pl_pcdu_mode_cmd(q=q, info=Info.SWITCH_OFF, mode=Mode.OFF, submode=0) if op_code in OpCode.ENABLE_HK: interval = float( @@ -212,13 +232,13 @@ def pack_pl_pcdu_commands( # noqa C901: Complexity is okay here. q.add_log_cmd(f"Enable PL PCDU HK with interval of {interval} seconds") for cmd in cmds: q.add_pus_tc(cmd) - if op_code in OpCode.DISABLE_HK: + if op_code == OpCode.DISABLE_HK: cmd = disable_periodic_hk_command( diag=True, sid=make_sid(PL_PCDU_ID, SetId.ADC) ) q.add_log_cmd("Disabling PL PCDU HK") q.add_pus_tc(cmd) - if op_code in OpCode.NORMAL_SSR: + if op_code == OpCode.NORMAL_SSR: pack_pl_pcdu_mode_cmd( q=q, info=Info.NORMAL_SSR, @@ -227,54 +247,90 @@ def pack_pl_pcdu_commands( # noqa C901: Complexity is okay here. NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON ), ) - if op_code in OpCode.NORMAL_DRO: + if op_code == OpCode.NORMAL_DRO: pack_pl_pcdu_mode_cmd( q=q, info=Info.NORMAL_DRO, mode=Mode.NORMAL, submode=submode_mask_to_submode(NormalSubmodesMask.DRO_ON), ) - if op_code in OpCode.NORMAL_X8: + if op_code == OpCode.NORMAL_X8: pack_pl_pcdu_mode_cmd( q=q, info=Info.NORMAL_X8, mode=Mode.NORMAL, submode=submode_mask_to_submode(NormalSubmodesMask.X8_ON), ) - if op_code in OpCode.NORMAL_TX: + if op_code == OpCode.NORMAL_TX: pack_pl_pcdu_mode_cmd( q=q, info=Info.NORMAL_TX, mode=Mode.NORMAL, submode=submode_mask_to_submode(NormalSubmodesMask.TX_ON), ) - if op_code in OpCode.NORMAL_MPA: + if op_code == OpCode.NORMAL_MPA: pack_pl_pcdu_mode_cmd( q=q, info=Info.NORMAL_MPA, mode=Mode.NORMAL, submode=submode_mask_to_submode(NormalSubmodesMask.MPA_ON), ) - if op_code in OpCode.NORMAL_HPA: + if op_code == OpCode.NORMAL_HPA: pack_pl_pcdu_mode_cmd( q=q, info=Info.NORMAL_HPA, mode=Mode.NORMAL, submode=submode_mask_to_submode(NormalSubmodesMask.HPA_ON), ) - if op_code in OpCode.REQ_OS_HK: + if op_code == OpCode.REQ_OS_HK: q.add_log_cmd(f"PL PCDU: {Info.REQ_OS_HK}") q.add_pus_tc( generate_one_diag_command( sid=make_sid(object_id=PL_PCDU_ID, set_id=SetId.ADC) ) ) - if op_code in OpCode.SWITCH_HPA_ON_PROC: + if op_code == OpCode.UPDATE_I_UPPER_LIMIT: + q.add_log_cmd(Info.UPDATE_I_UPPER_LIMIT) + print("Select device to update lower current limit for: ") + param_id = dev_select_to_lower_i_update_param_id(dev_select_prompt(True)) + new_param_value = float( + input("Please specify new parameter value as a double: ") + ) + q.add_pus_tc( + create_load_param_cmd( + create_scalar_double_parameter(PL_PCDU_ID, 0, param_id, new_param_value) + ) + ) + if op_code == OpCode.UPDATE_V_LOWER_LIMIT: + q.add_log_cmd(Info.UPDATE_V_LOWER_LIMIT) + print("Select device to update lower voltage limit for: ") + param_id = dev_select_to_lower_u_update_param_id(dev_select_prompt(True)) + new_param_value = float( + input("Please specify new parameter value as a double: ") + ) + q.add_pus_tc( + create_load_param_cmd( + create_scalar_double_parameter(PL_PCDU_ID, 0, param_id, new_param_value) + ) + ) + if op_code == OpCode.UPDATE_V_UPPER_LIMIT: + q.add_log_cmd(Info.UPDATE_V_UPPER_LIMIT) + print("Select device to update upper voltage limit for: ") + param_id = dev_select_to_upper_u_update_param_id(dev_select_prompt(True)) + new_param_value = float( + input("Please specify new parameter value as a double: ") + ) + q.add_pus_tc( + create_load_param_cmd( + create_scalar_double_parameter(PL_PCDU_ID, 0, param_id, new_param_value) + ) + ) + if op_code == OpCode.SWITCH_HPA_ON_PROC: hpa_on_procedure(q) - if op_code in OpCode.INJECT_ALL_ON_FAILURE: + if op_code == OpCode.INJECT_ALL_ON_FAILURE: pack_failure_injection_cmd( q=q, - param_id=ParamIds.INJECT_ALL_ON_FAILURE, + param_id=ParamId.INJECT_ALL_ON_FAILURE, print_str="All On", ) @@ -510,3 +566,72 @@ def handle_plpcdu_hk(pw: PrintWrapper, set_id: int, hk_data: bytes): FsfwTmTcPrinter.get_validity_buffer( validity_buffer=hk_data[current_idx:], num_vars=3 ) + + +def dev_select_prompt(skip_ssr: bool) -> DevSelect: + while True: + for dev in DevSelect: + if skip_ssr and dev == DevSelect.SSR_NEG_V: + continue + print(f"{dev}: {dev.name}") + dev_select = int(input("Select device by index: ")) + try: + return DevSelect(dev_select) + except IndexError: + _LOGGER.warn("Invalid paramter index, try again.") + continue + + +def dev_select_to_lower_i_update_param_id(dev_select: DevSelect) -> ParamId: + param_id = None + if dev_select == DevSelect.DRO: + param_id = ParamId.DRO_I_UPPER_BOUND + elif dev_select == DevSelect.X8: + param_id = ParamId.X8_I_UPPER_BOUND + elif dev_select == DevSelect.TX: + param_id = ParamId.TX_I_UPPER_BOUND + elif dev_select == DevSelect.MPA: + param_id = ParamId.MPA_I_UPPER_BOUND + elif dev_select == DevSelect.MPA: + param_id = ParamId.HPA_I_UPPER_BOUND + if param_id is None: + raise ValueError("invalid parameter ID") + return param_id + + +def dev_select_to_lower_u_update_param_id(dev_select: DevSelect) -> ParamId: + param_id = None + if dev_select == DevSelect.SSR_NEG_V: + param_id = ParamId.NEG_V_LOWER_BOUND + if dev_select == DevSelect.DRO: + param_id = ParamId.DRO_U_LOWER_BOUND + elif dev_select == DevSelect.X8: + param_id = ParamId.X8_U_LOWER_BOUND + elif dev_select == DevSelect.TX: + param_id = ParamId.TX_U_LOWER_BOUND + elif dev_select == DevSelect.MPA: + param_id = ParamId.MPA_U_LOWER_BOUND + elif dev_select == DevSelect.MPA: + param_id = ParamId.HPA_U_LOWER_BOUND + if param_id is None: + raise ValueError("invalid parameter ID") + return param_id + + +def dev_select_to_upper_u_update_param_id(dev_select: DevSelect) -> ParamId: + param_id = None + if dev_select == DevSelect.SSR_NEG_V: + param_id = ParamId.NEG_V_UPPER_BOUND + if dev_select == DevSelect.DRO: + param_id = ParamId.DRO_U_UPPER_BOUND + elif dev_select == DevSelect.X8: + param_id = ParamId.X8_U_UPPER_BOUND + elif dev_select == DevSelect.TX: + param_id = ParamId.TX_U_UPPER_BOUND + elif dev_select == DevSelect.MPA: + param_id = ParamId.MPA_U_UPPER_BOUND + elif dev_select == DevSelect.MPA: + param_id = ParamId.HPA_U_UPPER_BOUND + if param_id is None: + raise ValueError("invalid parameter ID") + return param_id -- 2.43.0 From 70c3f9dcaaa8f0623ee8c30d639947ea36f9bac1 Mon Sep 17 00:00:00 2001 From: Robin Mueller Date: Mon, 23 Oct 2023 17:09:30 +0200 Subject: [PATCH 2/4] changelog --- CHANGELOG.md | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/CHANGELOG.md b/CHANGELOG.md index 77648b2..2b9aa05 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -10,6 +10,10 @@ list yields a list of all related PRs for each release. # [unreleased] +## Added + +- Added command to update PL PCDU I and V parameter bounds. + # [v5.8.0] 2023-10-11 ## Added -- 2.43.0 From d900a689da0708be37892a6a965c9cb0b254265a Mon Sep 17 00:00:00 2001 From: Robin Mueller Date: Mon, 23 Oct 2023 17:16:23 +0200 Subject: [PATCH 3/4] bugfixes --- eive_tmtc/tmtc/payload/plpcdu.py | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/eive_tmtc/tmtc/payload/plpcdu.py b/eive_tmtc/tmtc/payload/plpcdu.py index 00ec767..e419fb5 100644 --- a/eive_tmtc/tmtc/payload/plpcdu.py +++ b/eive_tmtc/tmtc/payload/plpcdu.py @@ -292,7 +292,7 @@ def pack_pl_pcdu_commands( # noqa C901: Complexity is okay here. if op_code == OpCode.UPDATE_I_UPPER_LIMIT: q.add_log_cmd(Info.UPDATE_I_UPPER_LIMIT) print("Select device to update lower current limit for: ") - param_id = dev_select_to_lower_i_update_param_id(dev_select_prompt(True)) + param_id = dev_select_to_upper_i_update_param_id(dev_select_prompt(True)) new_param_value = float( input("Please specify new parameter value as a double: ") ) @@ -582,7 +582,7 @@ def dev_select_prompt(skip_ssr: bool) -> DevSelect: continue -def dev_select_to_lower_i_update_param_id(dev_select: DevSelect) -> ParamId: +def dev_select_to_upper_i_update_param_id(dev_select: DevSelect) -> ParamId: param_id = None if dev_select == DevSelect.DRO: param_id = ParamId.DRO_I_UPPER_BOUND @@ -592,7 +592,7 @@ def dev_select_to_lower_i_update_param_id(dev_select: DevSelect) -> ParamId: param_id = ParamId.TX_I_UPPER_BOUND elif dev_select == DevSelect.MPA: param_id = ParamId.MPA_I_UPPER_BOUND - elif dev_select == DevSelect.MPA: + elif dev_select == DevSelect.HPA: param_id = ParamId.HPA_I_UPPER_BOUND if param_id is None: raise ValueError("invalid parameter ID") @@ -611,7 +611,7 @@ def dev_select_to_lower_u_update_param_id(dev_select: DevSelect) -> ParamId: param_id = ParamId.TX_U_LOWER_BOUND elif dev_select == DevSelect.MPA: param_id = ParamId.MPA_U_LOWER_BOUND - elif dev_select == DevSelect.MPA: + elif dev_select == DevSelect.HPA: param_id = ParamId.HPA_U_LOWER_BOUND if param_id is None: raise ValueError("invalid parameter ID") @@ -630,7 +630,7 @@ def dev_select_to_upper_u_update_param_id(dev_select: DevSelect) -> ParamId: param_id = ParamId.TX_U_UPPER_BOUND elif dev_select == DevSelect.MPA: param_id = ParamId.MPA_U_UPPER_BOUND - elif dev_select == DevSelect.MPA: + elif dev_select == DevSelect.HPA: param_id = ParamId.HPA_U_UPPER_BOUND if param_id is None: raise ValueError("invalid parameter ID") -- 2.43.0 From b45b0b2271cd67d501921a97a1325fb983da4d00 Mon Sep 17 00:00:00 2001 From: Robin Mueller Date: Mon, 23 Oct 2023 17:20:04 +0200 Subject: [PATCH 4/4] another small bug --- eive_tmtc/tmtc/payload/plpcdu.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/eive_tmtc/tmtc/payload/plpcdu.py b/eive_tmtc/tmtc/payload/plpcdu.py index e419fb5..a5cbef0 100644 --- a/eive_tmtc/tmtc/payload/plpcdu.py +++ b/eive_tmtc/tmtc/payload/plpcdu.py @@ -304,7 +304,7 @@ def pack_pl_pcdu_commands( # noqa C901: Complexity is okay here. if op_code == OpCode.UPDATE_V_LOWER_LIMIT: q.add_log_cmd(Info.UPDATE_V_LOWER_LIMIT) print("Select device to update lower voltage limit for: ") - param_id = dev_select_to_lower_u_update_param_id(dev_select_prompt(True)) + param_id = dev_select_to_lower_u_update_param_id(dev_select_prompt(False)) new_param_value = float( input("Please specify new parameter value as a double: ") ) @@ -316,7 +316,7 @@ def pack_pl_pcdu_commands( # noqa C901: Complexity is okay here. if op_code == OpCode.UPDATE_V_UPPER_LIMIT: q.add_log_cmd(Info.UPDATE_V_UPPER_LIMIT) print("Select device to update upper voltage limit for: ") - param_id = dev_select_to_upper_u_update_param_id(dev_select_prompt(True)) + param_id = dev_select_to_upper_u_update_param_id(dev_select_prompt(False)) new_param_value = float( input("Please specify new parameter value as a double: ") ) -- 2.43.0