# -*- coding: utf-8 -*-
"""
@file       gomspace_common.py
@brief      PDU2 tests
@details    All functions and classes common for all gomspace devices are defined in this file.
@author     J. Meier
@date       17.12.2020
"""


class GomspaceDeviceActions:
    PING = bytearray([0x0, 0x0, 0x0, 0x1])
    REBOOT = bytearray([0x0, 0x0, 0x0, 0x4])
    PARAM_GET = bytearray([0x0, 0x0, 0x0, 0x00])
    PARAM_SET = bytearray([0x0, 0x0, 0x0, 0xFF])
    WDT_RESET = bytearray([0x0, 0x0, 0x0, 0x9])


class TableIds:
    config = 1
    hk = 4


class TableEntry:
    uint8_size = 1
    uint16_size = 2
    uint32_size = 4

    def __init__(self, parameter_address: bytearray, parameter_size):
        self.parameter_address = parameter_address
        self.parameter_size = parameter_size


class Channel:
    on = 1
    off = 0


def pack_get_param_command(object_id: bytearray, table_id: int, memory_address: bytearray,
                           parameter_size: int) -> bytearray:
    """ Function to generate a command to retrieve parameters like the temperature from a gomspace device.
    @param object_id:   The object id of the gomspace device handler.
    @param table_id:    The table id of the gomspace device
    @param memory_address:  Address offset within table of the value to read.
    @param parameter_size:  Size of the value to read. E.g. temperature is uint16_t and thus parameter_size is 2
    @return:    The command as bytearray.
    """
    action_id = GomspaceDeviceActions.PARAM_GET
    command = bytearray()
    command = command + object_id + action_id
    command.append(table_id)
    command = command + memory_address
    command.append(parameter_size)
    return command


def pack_set_param_command(object_id: bytearray, memory_address: bytearray, parameter_size: int,
                           parameter: int) -> bytearray:
    """ Function to generate a command to set a parameter
    @param object_id:   The object id of the gomspace device handler.
    @param memory_address:  Address offset within table of the value to set.
    @param parameter: The parameter value to set.
    @param parameter_size:  Size of the value to set. There are uint8_t, uint16_t and uint32_t in the device tables.
    @return:    The command as bytearray.
    """
    action_id = GomspaceDeviceActions.PARAM_SET
    command = bytearray()
    command = command + object_id + action_id
    command = command + memory_address
    command.append(parameter_size)
    if parameter_size == 1:
        command.append(parameter)
    elif parameter_size == 2:
        byte_one = 0xFF00 & parameter >> 8
        byte_two = 0xFF & parameter
        command.append(byte_one)
        command.append(byte_two)
    elif parameter_size == 4:
        byte_one = 0xFF000000 & parameter >> 24
        byte_two = 0xFF0000 & parameter >> 16
        byte_three = 0xFF00 & parameter >> 8
        byte_four = 0xFF & parameter
        command.append(byte_one)
        command.append(byte_two)
        command.append(byte_three)
        command.append(byte_four)
    return command


def pack_ping_command(object_id: bytearray, data: bytearray) -> bytearray:
    """" Function to generate the command to ping a gomspace device
    @param object_id    Object Id of the gomspace device handler.
    @param data Bytearray containing the bytes to send to the gomspace device. For now the on board software
                supports only the handling of up to 33 bytes.
    @note   The ping request sends the specified data to a gompsace device. These
            data are simply copied by the device and then sent back.
    """
    action_id = GomspaceDeviceActions.PING
    command = object_id + action_id + data
    return command


def pack_gnd_wdt_reset_command(object_id: bytearray) -> bytearray:
    """" Function to generate the command to reset the watchdog of a gomspace device.
    @param object_id    Object Id of the gomspace device handler.
    """
    action_id = GomspaceDeviceActions.WDT_RESET
    command = bytearray()
    command += object_id + action_id
    return command


def pack_reboot_command(object_id: bytearray) -> bytearray:
    """ Function to generate the command which triggers a reboot of a gomspace device
    @param object_id    The object id of the gomspace device handler.
    """
    action_id = GomspaceDeviceActions.REBOOT
    command = bytearray()
    command += object_id + action_id
    return command