import enum
import logging
import struct
import time
from typing import Optional

from eive_tmtc.config.definitions import CustomServiceList
from eive_tmtc.pus_tm.defs import PrintWrapper
from tmtccmd.config import TmtcDefinitionWrapper

from tmtccmd.config.tmtc import OpCodeEntry, tmtc_definitions_provider
from tmtccmd.tc import DefaultPusQueueHelper
from tmtccmd.tc.pus_3_fsfw_hk import (
    make_sid,
    generate_one_diag_command,
    enable_periodic_hk_command_with_interval,
    disable_periodic_hk_command,
)
from tmtccmd.tc.pus_11_tc_sched import (
    create_enable_tc_sched_cmd,
    create_time_tagged_cmd,
)
from tmtccmd.pus.s200_fsfw_mode import Subservice
from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode
from tmtccmd.tc.pus_20_fsfw_param import (
    create_scalar_double_parameter,
    create_load_param_cmd,
    create_scalar_boolean_parameter,
)
from spacepackets.ecss.tc import PusTelecommand
from eive_tmtc.config.object_ids import PL_PCDU_ID
from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter

_LOGGER = logging.getLogger(__name__)


class OpCode:
    SWITCH_HPA_ON_PROC = ["0", "proc_hpa"]
    SWITCH_ON = "on"
    SWITCH_OFF = "off"
    NORMAL_SSR = "nml_ssr"
    NORMAL_DRO = "nml_dro"
    NORMAL_X8 = "nml_x8"
    NORMAL_TX = "nml_tx"
    NORMAL_MPA = "nml_mpa"
    NORMAL_HPA = "nml_hpa"

    ENABLE_HK = "enable_hk"
    DISABLE_HK = "disable_hk"
    REQ_OS_HK = "hk_os"

    UPDATE_I_UPPER_LIMIT = "update_i_upper_limit"
    UPDATE_V_LOWER_LIMIT = "update_v_lower_limit"
    UPDATE_V_UPPER_LIMIT = "update_v_upper_limit"

    INJECT_SSR_TO_DRO_FAILURE = ["10", "inject_ssr_dro_fault"]
    INJECT_DRO_TO_X8_FAILURE = ["11", "inject_dro_x8_fault"]
    INJECT_X8_TO_TX_FAILURE = ["12", "inject_x8_tx_fault"]
    INJECT_TX_TO_MPA_FAILURE = ["13", "inject_tx_mpa_fault"]
    INJECT_MPA_TO_HPA_FAILURE = ["14", "inject_mpa_hpa_fault"]
    INJECT_ALL_ON_FAILURE = ["15", "inject_all_on_fault"]


class Info:
    NORMAL = "ADC modules normal"
    SWITCH_ON = "Switching on"
    SWITCH_OFF = "Switching off"
    NORMAL_SSR = f"{NORMAL}, SSR on"
    NORMAL_DRO = f"{NORMAL},DRO on"
    NORMAL_X8 = f"{NORMAL}, X8 on"
    NORMAL_TX = f"{NORMAL}, TX on"
    NORMAL_MPA = f"{NORMAL}, MPA on"
    NORMAL_HPA = f"{NORMAL}, HPA on"
    REQ_OS_HK = "Request One Shot HK"
    SWITCH_HPA_ON_PROC = "Switch HPA on procedure"
    ENABLE_HK = "Enable HK"
    DISABLE_HK = "Disable HK"
    UPDATE_I_UPPER_LIMIT = "Update upper current parameter"
    UPDATE_V_LOWER_LIMIT = "Update lower voltage parameter"
    UPDATE_V_UPPER_LIMIT = "Update upper voltage parameter"


class SetId(enum.IntEnum):
    ADC = 0


class NormalSubmodesMask(enum.IntEnum):
    SOLID_STATE_RELAYS_ADC_ON = 0
    DRO_ON = 1
    X8_ON = 2
    TX_ON = 3
    MPA_ON = 4
    HPA_ON = 5


class SubmodeForNormalMode(enum.IntEnum):
    NONE = 0
    SSR_ON = 1 << NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
    DRO_ON = 1 << NormalSubmodesMask.DRO_ON | (
        1 << NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
    )
    X8_ON = (
        1 << NormalSubmodesMask.DRO_ON
        | (1 << NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON)
        | (1 << NormalSubmodesMask.X8_ON)
    )
    TX_ON = (
        1 << NormalSubmodesMask.DRO_ON
        | (1 << NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON)
        | (1 << NormalSubmodesMask.X8_ON)
        | (1 << NormalSubmodesMask.TX_ON)
    )
    MPA_ON = (
        1 << NormalSubmodesMask.DRO_ON
        | (1 << NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON)
        | (1 << NormalSubmodesMask.X8_ON)
        | (1 << NormalSubmodesMask.TX_ON)
        | (1 << NormalSubmodesMask.MPA_ON)
    )
    HPA_ON = (
        1 << NormalSubmodesMask.DRO_ON
        | (1 << NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON)
        | (1 << NormalSubmodesMask.X8_ON)
        | (1 << NormalSubmodesMask.TX_ON)
        | (1 << NormalSubmodesMask.MPA_ON)
        | (1 << NormalSubmodesMask.HPA_ON)
    )


class ParamId(enum.IntEnum):
    NEG_V_LOWER_BOUND = 0
    NEG_V_UPPER_BOUND = 1

    DRO_U_LOWER_BOUND = 2
    DRO_U_UPPER_BOUND = 3
    DRO_I_UPPER_BOUND = 4

    X8_U_LOWER_BOUND = 5
    X8_U_UPPER_BOUND = 6
    X8_I_UPPER_BOUND = 7

    TX_U_LOWER_BOUND = 8
    TX_U_UPPER_BOUND = 9
    TX_I_UPPER_BOUND = 10

    MPA_U_LOWER_BOUND = 11
    MPA_U_UPPER_BOUND = 12
    MPA_I_UPPER_BOUND = 13

    HPA_U_LOWER_BOUND = 14
    HPA_U_UPPER_BOUND = 15
    HPA_I_UPPER_BOUND = 16

    SSR_TO_DRO_WAIT_TIME = 17
    DRO_TO_X8_WAIT_TIME = 18
    X8_TO_TX_WAIT_TIME = 19
    TX_TO_MPA_WAIT_TIME = 20
    MPA_TO_HPA_WAIT_TIME = 21

    INJECT_SSR_TO_DRO_FAILURE = 30
    INJECT_DRO_TO_X8_FAILURE = 31
    INJECT_X8_TO_TX_FAILURE = 32
    INJECT_TX_TO_MPA_FAILURE = 33
    INJECT_MPA_TO_HPA_FAILURE = 34
    INJECT_ALL_ON_FAILURE = 35


class DevSelect(enum.IntEnum):
    SSR_NEG_V = 0
    DRO = 1
    X8 = 2
    TX = 3
    MPA = 4
    HPA = 5


@tmtc_definitions_provider
def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper):
    oce = OpCodeEntry()
    oce.add(keys=OpCode.SWITCH_HPA_ON_PROC, info=Info.SWITCH_HPA_ON_PROC)
    oce.add(keys=OpCode.SWITCH_ON, info=Info.SWITCH_ON)
    oce.add(keys=OpCode.SWITCH_OFF, info=Info.SWITCH_OFF)
    oce.add(keys=OpCode.NORMAL_SSR, info=Info.NORMAL_SSR)
    oce.add(keys=OpCode.NORMAL_DRO, info=Info.NORMAL_DRO)
    oce.add(keys=OpCode.NORMAL_X8, info=Info.NORMAL_X8)
    oce.add(keys=OpCode.NORMAL_TX, info=Info.NORMAL_TX)
    oce.add(keys=OpCode.NORMAL_MPA, info=Info.NORMAL_MPA)
    oce.add(keys=OpCode.NORMAL_HPA, info=Info.NORMAL_HPA)
    oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
    oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK)
    oce.add(keys=OpCode.UPDATE_V_LOWER_LIMIT, info=Info.UPDATE_V_LOWER_LIMIT)
    oce.add(keys=OpCode.UPDATE_V_UPPER_LIMIT, info=Info.UPDATE_V_UPPER_LIMIT)
    oce.add(keys=OpCode.UPDATE_I_UPPER_LIMIT, info=Info.UPDATE_I_UPPER_LIMIT)
    oce.add(
        keys=OpCode.INJECT_SSR_TO_DRO_FAILURE,
        info="Inject failure SSR to DRO transition",
    )
    oce.add(
        keys=OpCode.INJECT_DRO_TO_X8_FAILURE,
        info="Inject failure in DRO to X8 transition",
    )
    oce.add(
        keys=OpCode.INJECT_X8_TO_TX_FAILURE,
        info="Inject failure in X8 to TX transition",
    )
    oce.add(
        keys=OpCode.INJECT_TX_TO_MPA_FAILURE,
        info="Inject failure in TX to MPA transition",
    )
    oce.add(
        keys=OpCode.INJECT_MPA_TO_HPA_FAILURE,
        info="Inject failure in MPA to HPA transition",
    )
    oce.add(keys=OpCode.INJECT_ALL_ON_FAILURE, info="Inject failure in all on mode")
    defs.add_service(CustomServiceList.PL_PCDU.value, "PL PCDU", oce)


def pack_pl_pcdu_commands(  # noqa C901: Complexity is okay here.
    q: DefaultPusQueueHelper, op_code: str
):  # noqa C901: Complexity is okay here.
    if op_code == OpCode.SWITCH_ON:
        pack_pl_pcdu_mode_cmd(q=q, info=Info.SWITCH_ON, mode=Mode.ON, submode=0)
    if op_code == OpCode.SWITCH_OFF:
        pack_pl_pcdu_mode_cmd(q=q, info=Info.SWITCH_OFF, mode=Mode.OFF, submode=0)
    if op_code in OpCode.ENABLE_HK:
        interval = float(
            input("Please enter HK collection interval in floating point seconds: ")
        )
        cmds = enable_periodic_hk_command_with_interval(
            diag=True, sid=make_sid(PL_PCDU_ID, SetId.ADC), interval_seconds=interval
        )
        q.add_log_cmd(f"Enable PL PCDU HK with interval of {interval} seconds")
        for cmd in cmds:
            q.add_pus_tc(cmd)
    if op_code == OpCode.DISABLE_HK:
        cmd = disable_periodic_hk_command(
            diag=True, sid=make_sid(PL_PCDU_ID, SetId.ADC)
        )
        q.add_log_cmd("Disabling PL PCDU HK")
        q.add_pus_tc(cmd)
    if op_code == OpCode.NORMAL_SSR:
        pack_pl_pcdu_mode_cmd(
            q=q,
            info=Info.NORMAL_SSR,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(
                NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
            ),
        )
    if op_code == OpCode.NORMAL_DRO:
        pack_pl_pcdu_mode_cmd(
            q=q,
            info=Info.NORMAL_DRO,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.DRO_ON),
        )
    if op_code == OpCode.NORMAL_X8:
        pack_pl_pcdu_mode_cmd(
            q=q,
            info=Info.NORMAL_X8,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.X8_ON),
        )
    if op_code == OpCode.NORMAL_TX:
        pack_pl_pcdu_mode_cmd(
            q=q,
            info=Info.NORMAL_TX,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.TX_ON),
        )
    if op_code == OpCode.NORMAL_MPA:
        pack_pl_pcdu_mode_cmd(
            q=q,
            info=Info.NORMAL_MPA,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.MPA_ON),
        )
    if op_code == OpCode.NORMAL_HPA:
        pack_pl_pcdu_mode_cmd(
            q=q,
            info=Info.NORMAL_HPA,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.HPA_ON),
        )
    if op_code == OpCode.REQ_OS_HK:
        q.add_log_cmd(f"PL PCDU: {Info.REQ_OS_HK}")
        q.add_pus_tc(
            generate_one_diag_command(
                sid=make_sid(object_id=PL_PCDU_ID, set_id=SetId.ADC)
            )
        )
    if op_code == OpCode.UPDATE_I_UPPER_LIMIT:
        q.add_log_cmd(Info.UPDATE_I_UPPER_LIMIT)
        print("Select device to update lower current limit for: ")
        param_id = dev_select_to_upper_i_update_param_id(dev_select_prompt(True))
        new_param_value = float(
            input("Please specify new parameter value as a double: ")
        )
        q.add_pus_tc(
            create_load_param_cmd(
                create_scalar_double_parameter(PL_PCDU_ID, 0, param_id, new_param_value)
            )
        )
    if op_code == OpCode.UPDATE_V_LOWER_LIMIT:
        q.add_log_cmd(Info.UPDATE_V_LOWER_LIMIT)
        print("Select device to update lower voltage limit for: ")
        param_id = dev_select_to_lower_u_update_param_id(dev_select_prompt(False))
        new_param_value = float(
            input("Please specify new parameter value as a double: ")
        )
        q.add_pus_tc(
            create_load_param_cmd(
                create_scalar_double_parameter(PL_PCDU_ID, 0, param_id, new_param_value)
            )
        )
    if op_code == OpCode.UPDATE_V_UPPER_LIMIT:
        q.add_log_cmd(Info.UPDATE_V_UPPER_LIMIT)
        print("Select device to update upper voltage limit for: ")
        param_id = dev_select_to_upper_u_update_param_id(dev_select_prompt(False))
        new_param_value = float(
            input("Please specify new parameter value as a double: ")
        )
        q.add_pus_tc(
            create_load_param_cmd(
                create_scalar_double_parameter(PL_PCDU_ID, 0, param_id, new_param_value)
            )
        )
    if op_code == OpCode.SWITCH_HPA_ON_PROC:
        hpa_on_procedure(q)
    if op_code == OpCode.INJECT_ALL_ON_FAILURE:
        pack_failure_injection_cmd(
            q=q,
            param_id=ParamId.INJECT_ALL_ON_FAILURE,
            print_str="All On",
        )


def hpa_on_procedure(q: DefaultPusQueueHelper):
    delay_dro_to_x8 = request_wait_time()
    if delay_dro_to_x8 is None:
        delay_dro_to_x8 = 900
    q.add_log_cmd(
        "Starting procedure to switch on PL PCDU HPA with DRO to X8 "
        f"delay of {delay_dro_to_x8} seconds"
    )
    pl_pcdu_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(object_id=PL_PCDU_ID, mode=Mode.ON, submode=0),
    )
    ssr_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(
            object_id=PL_PCDU_ID,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(
                NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
            ),
        ),
    )
    dro_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(
            object_id=PL_PCDU_ID,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.DRO_ON),
        ),
    )
    x8_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(
            object_id=PL_PCDU_ID,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.X8_ON),
        ),
    )
    tx_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(
            object_id=PL_PCDU_ID,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.TX_ON),
        ),
    )
    mpa_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(
            object_id=PL_PCDU_ID,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.MPA_ON),
        ),
    )
    hpa_on = PusTelecommand(
        service=200,
        subservice=Subservice.TC_MODE_COMMAND,
        app_data=pack_mode_data(
            object_id=PL_PCDU_ID,
            mode=Mode.NORMAL,
            submode=submode_mask_to_submode(NormalSubmodesMask.HPA_ON),
        ),
    )
    current_time = time.time()

    enb_sched = create_enable_tc_sched_cmd()

    sched_time = int(round(current_time + 10))
    q.add_pus_tc(enb_sched)
    tagged_on_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time),
        tc_to_insert=pl_pcdu_on,
    )
    q.add_pus_tc(tagged_on_cmd)

    sched_time += 5
    tagged_ssr_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time),
        tc_to_insert=ssr_on,
    )
    q.add_pus_tc(tagged_ssr_cmd)

    sched_time += 5
    tagged_dro_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time), tc_to_insert=dro_on
    )
    q.add_pus_tc(tagged_dro_cmd)

    sched_time += delay_dro_to_x8
    sched_time = int(round(sched_time))
    tagged_x8_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time), tc_to_insert=x8_on
    )
    q.add_pus_tc(tagged_x8_cmd)

    sched_time += 5
    tagged_tx_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time), tc_to_insert=tx_on
    )
    q.add_pus_tc(tagged_tx_cmd)

    sched_time += 5
    tagged_mpa_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time), tc_to_insert=mpa_on
    )
    q.add_pus_tc(tagged_mpa_cmd)

    sched_time += 5
    tagged_hpa_cmd = create_time_tagged_cmd(
        release_time=struct.pack("!I", sched_time), tc_to_insert=hpa_on
    )
    q.add_pus_tc(tagged_hpa_cmd)


def request_wait_time() -> Optional[float]:
    while True:
        wait_time = input("Please enter DRO to X8 wait time in seconds, x to cancel: ")
        if wait_time.lower() == "x":
            return None
        try:
            wait_time = float(wait_time)
        except ValueError:
            _LOGGER.warning("Invalid input")
            continue
        if wait_time <= 0:
            _LOGGER.warning("Invalid input")
        else:
            return wait_time


def submode_mask_to_submode(on_tgt: NormalSubmodesMask) -> int:
    if on_tgt == NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON:
        return SubmodeForNormalMode.SSR_ON
    if on_tgt == NormalSubmodesMask.DRO_ON:
        return SubmodeForNormalMode.DRO_ON
    if on_tgt == NormalSubmodesMask.X8_ON:
        return SubmodeForNormalMode.X8_ON
    if on_tgt == NormalSubmodesMask.TX_ON:
        return SubmodeForNormalMode.TX_ON
    if on_tgt == NormalSubmodesMask.MPA_ON:
        return SubmodeForNormalMode.MPA_ON
    if on_tgt == NormalSubmodesMask.HPA_ON:
        return SubmodeForNormalMode.HPA_ON


def pack_wait_time_cmd(q: DefaultPusQueueHelper, param_id: int, print_str: str):
    wait_time = request_wait_time()
    q.add_log_cmd(f"Updating {print_str} wait time to {wait_time}")
    if wait_time is None:
        return
    param_data = create_scalar_double_parameter(
        object_id=PL_PCDU_ID,
        domain_id=0,
        unique_id=param_id,
        parameter=wait_time,
    )
    q.add_pus_tc(create_load_param_cmd(param_data))


def pack_failure_injection_cmd(q: DefaultPusQueueHelper, param_id: int, print_str: str):
    q.add_log_cmd(f"Inserting {print_str} error")
    param_data = create_scalar_boolean_parameter(
        object_id=PL_PCDU_ID, domain_id=0, unique_id=param_id, parameter=True
    )
    q.add_pus_tc(create_load_param_cmd(param_data))


def pack_pl_pcdu_mode_cmd(
    q: DefaultPusQueueHelper, info: str, mode: Mode, submode: int
):
    q.add_log_cmd(info)
    mode_data = pack_mode_data(object_id=PL_PCDU_ID, mode=mode, submode=submode)
    q.add_pus_tc(
        PusTelecommand(
            service=200, subservice=Subservice.TC_MODE_COMMAND, app_data=mode_data
        )
    )


ADC_CHANNELS_NAMED = [
    "U BAT DIV 6 [V]",
    "U NEG V FB [V]",
    "I HPA [mA]",
    "U HPA DIV 6 [V]",
    "I MPA [mA]",
    "U MPA DIV 6 [V]",
    "I TX [mA]",
    "U TX DIV 6 [V]",
    "I X8 [mA]",
    "U X8 DIV 6 [V]",
    "I DRO [mA]",
    "U DRO DIV 6 [V]",
]


def handle_plpcdu_hk(pw: PrintWrapper, set_id: int, hk_data: bytes):
    if set_id == SetId.ADC:
        current_idx = 0
        pw.dlog("Received PL PCDU ADC HK data")
        channels = []
        ch_print = "Channels Raw (hex): ["
        for i in range(12):
            channels.append(
                struct.unpack("!H", hk_data[current_idx : current_idx + 2])[0]
            )
            if i < 11:
                ch_print += f"{channels[i]:06x},"
            else:
                ch_print += f"{channels[i]:06x}]"
            current_idx += 2
        processed_vals = []
        for i in range(12):
            processed_vals.append(
                struct.unpack("!f", hk_data[current_idx : current_idx + 4])[0]
            )
            current_idx += 4
        temp = struct.unpack("!f", hk_data[current_idx : current_idx + 4])[0]
        current_idx += 4
        pw.dlog(f"Temperature: {temp} C")
        pw.dlog(ch_print)
        for i in range(12):
            pw.dlog(f"{ADC_CHANNELS_NAMED[i].ljust(24)} | {processed_vals[i]}")
        FsfwTmTcPrinter.get_validity_buffer(
            validity_buffer=hk_data[current_idx:], num_vars=3
        )


def dev_select_prompt(skip_ssr: bool) -> DevSelect:
    while True:
        for dev in DevSelect:
            if skip_ssr and dev == DevSelect.SSR_NEG_V:
                continue
            print(f"{dev}: {dev.name}")
        dev_select = int(input("Select device by index: "))
        try:
            return DevSelect(dev_select)
        except IndexError:
            _LOGGER.warn("Invalid paramter index, try again.")
            continue


def dev_select_to_upper_i_update_param_id(dev_select: DevSelect) -> ParamId:
    param_id = None
    if dev_select == DevSelect.DRO:
        param_id = ParamId.DRO_I_UPPER_BOUND
    elif dev_select == DevSelect.X8:
        param_id = ParamId.X8_I_UPPER_BOUND
    elif dev_select == DevSelect.TX:
        param_id = ParamId.TX_I_UPPER_BOUND
    elif dev_select == DevSelect.MPA:
        param_id = ParamId.MPA_I_UPPER_BOUND
    elif dev_select == DevSelect.HPA:
        param_id = ParamId.HPA_I_UPPER_BOUND
    if param_id is None:
        raise ValueError("invalid parameter ID")
    return param_id


def dev_select_to_lower_u_update_param_id(dev_select: DevSelect) -> ParamId:
    param_id = None
    if dev_select == DevSelect.SSR_NEG_V:
        param_id = ParamId.NEG_V_LOWER_BOUND
    if dev_select == DevSelect.DRO:
        param_id = ParamId.DRO_U_LOWER_BOUND
    elif dev_select == DevSelect.X8:
        param_id = ParamId.X8_U_LOWER_BOUND
    elif dev_select == DevSelect.TX:
        param_id = ParamId.TX_U_LOWER_BOUND
    elif dev_select == DevSelect.MPA:
        param_id = ParamId.MPA_U_LOWER_BOUND
    elif dev_select == DevSelect.HPA:
        param_id = ParamId.HPA_U_LOWER_BOUND
    if param_id is None:
        raise ValueError("invalid parameter ID")
    return param_id


def dev_select_to_upper_u_update_param_id(dev_select: DevSelect) -> ParamId:
    param_id = None
    if dev_select == DevSelect.SSR_NEG_V:
        param_id = ParamId.NEG_V_UPPER_BOUND
    if dev_select == DevSelect.DRO:
        param_id = ParamId.DRO_U_UPPER_BOUND
    elif dev_select == DevSelect.X8:
        param_id = ParamId.X8_U_UPPER_BOUND
    elif dev_select == DevSelect.TX:
        param_id = ParamId.TX_U_UPPER_BOUND
    elif dev_select == DevSelect.MPA:
        param_id = ParamId.MPA_U_UPPER_BOUND
    elif dev_select == DevSelect.HPA:
        param_id = ParamId.HPA_U_UPPER_BOUND
    if param_id is None:
        raise ValueError("invalid parameter ID")
    return param_id