import enum from tmtccmd.tc import DefaultPusQueueHelper from tmtccmd.tc.pus_200_fsfw_modes import Modes from config.object_ids import ACS_BOARD_ASS_ID, SUS_BOARD_ASS_ID from .common import command_mode class AcsOpCodes: ACS_ASS_A_SIDE = ["0", "acs-a"] ACS_ASS_B_SIDE = ["1", "acs-b"] ACS_ASS_DUAL_MODE = ["2", "acs-d"] ACS_ASS_OFF = ["3", "acs-off"] ACS_ASS_A_ON = ["4", "acs-ao"] ACS_ASS_B_ON = ["5", "acs-bo"] ACS_ASS_DUAL_ON = ["6", "acs-do"] class SusOpCodes: SUS_ASS_NOM_SIDE = ["0", "sus-nom"] SUS_ASS_RED_SIDE = ["1", "sus-red"] SUS_ASS_DUAL_MODE = ["2", "sus-d"] SUS_ASS_OFF = ["3", "sus-off"] class DualSideSubmodes(enum.IntEnum): A_SIDE = 0 B_SIDE = 1 DUAL_SIDE = 2 def pack_acs_command(q: DefaultPusQueueHelper, op_code: str): if op_code in AcsOpCodes.ACS_ASS_A_SIDE: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.NORMAL, submode=DualSideSubmodes.A_SIDE, q=q, info="Switching to ACS board assembly A side", ) if op_code in AcsOpCodes.ACS_ASS_B_SIDE: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.NORMAL, submode=DualSideSubmodes.B_SIDE, q=q, info="Switching to ACS board assembly B side", ) if op_code in AcsOpCodes.ACS_ASS_DUAL_MODE: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.NORMAL, submode=DualSideSubmodes.DUAL_SIDE, q=q, info="Switching to ACS board assembly dual mode", ) if op_code in AcsOpCodes.ACS_ASS_A_ON: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.ON, submode=DualSideSubmodes.A_SIDE, q=q, info="Switching ACS board assembly A side on", ) if op_code in AcsOpCodes.ACS_ASS_B_ON: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.ON, submode=DualSideSubmodes.B_SIDE, q=q, info="Switching ACS board assembly B side on", ) if op_code in AcsOpCodes.ACS_ASS_DUAL_ON: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.ON, submode=DualSideSubmodes.B_SIDE, q=q, info="Switching ACS board assembly dual side on", ) if op_code in AcsOpCodes.ACS_ASS_OFF: command_mode( object_id=ACS_BOARD_ASS_ID, mode=Modes.OFF, submode=0, q=q, info="Switching to ACS board assembly off", ) def pack_sus_cmds(q: DefaultPusQueueHelper, op_code: str): if op_code in SusOpCodes.SUS_ASS_NOM_SIDE: command_mode( object_id=SUS_BOARD_ASS_ID, mode=Modes.NORMAL, submode=DualSideSubmodes.A_SIDE, q=q, info="Switching to SUS board to nominal side", ) if op_code in SusOpCodes.SUS_ASS_RED_SIDE: command_mode( object_id=SUS_BOARD_ASS_ID, mode=Modes.NORMAL, submode=DualSideSubmodes.B_SIDE, q=q, info="Switching to SUS board to redundant side", ) if op_code in SusOpCodes.SUS_ASS_OFF: command_mode( object_id=SUS_BOARD_ASS_ID, mode=Modes.OFF, submode=0, q=q, info="Switching SUS board off", ) if op_code in SusOpCodes.SUS_ASS_DUAL_MODE: command_mode( object_id=SUS_BOARD_ASS_ID, mode=Modes.NORMAL, submode=DualSideSubmodes.DUAL_SIDE, q=q, info="Switching to SUS board to dual side", )