fsfw/hal/src/fsfw_hal/stm32h7/spi/mspInit.cpp

254 lines
8.7 KiB
C++
Raw Normal View History

2021-08-02 20:58:56 +02:00
#include "fsfw_hal/stm32h7/dma.h"
#include "fsfw_hal/stm32h7/spi/mspInit.h"
#include "fsfw_hal/stm32h7/spi/spiCore.h"
#include "fsfw_hal/stm32h7/spi/spiInterrupts.h"
2021-07-15 19:23:12 +02:00
2021-07-13 19:19:25 +02:00
#include "stm32h743xx.h"
#include "stm32h7xx_hal_spi.h"
#include "stm32h7xx_hal_dma.h"
#include "stm32h7xx_hal_def.h"
2021-07-15 19:23:12 +02:00
#include <cstdio>
2021-07-13 19:19:25 +02:00
spi::msp_func_t mspInitFunc = nullptr;
spi::MspCfgBase* mspInitArgs = nullptr;
spi::msp_func_t mspDeinitFunc = nullptr;
spi::MspCfgBase* mspDeinitArgs = nullptr;
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example:
* - Peripheral's clock enable
* - Peripheral's GPIO Configuration
* - DMA configuration for transmission request by peripheral
* - NVIC configuration for DMA interrupt request enable
* @param hspi: SPI handle pointer
* @retval None
*/
void spi::halMspInitDma(SPI_HandleTypeDef* hspi, MspCfgBase* cfgBase) {
auto cfg = dynamic_cast<MspDmaConfigStruct*>(cfgBase);
if(hspi == nullptr or cfg == nullptr) {
return;
}
setSpiHandle(hspi);
DMA_HandleTypeDef* hdma_tx = nullptr;
DMA_HandleTypeDef* hdma_rx = nullptr;
spi::getDmaHandles(&hdma_tx, &hdma_rx);
if(hdma_tx == nullptr or hdma_rx == nullptr) {
printf("HAL_SPI_MspInit: Invalid DMA handles. Make sure to call setDmaHandles!\n");
return;
}
spi::halMspInitInterrupt(hspi, cfg);
// DMA setup
if(cfg->dmaClkEnableWrapper == nullptr) {
mspErrorHandler("spi::halMspInitDma", "DMA Clock init invalid");
}
cfg->dmaClkEnableWrapper();
// Configure the DMA
/* Configure the DMA handler for Transmission process */
if(hdma_tx->Instance == nullptr) {
// Assume it was not configured properly
mspErrorHandler("spi::halMspInitDma", "DMA TX handle invalid");
}
HAL_DMA_Init(hdma_tx);
/* Associate the initialized DMA handle to the the SPI handle */
__HAL_LINKDMA(hspi, hdmatx, *hdma_tx);
HAL_DMA_Init(hdma_rx);
/* Associate the initialized DMA handle to the the SPI handle */
__HAL_LINKDMA(hspi, hdmarx, *hdma_rx);
/*##-4- Configure the NVIC for DMA #########################################*/
/* NVIC configuration for DMA transfer complete interrupt (SPI1_RX) */
// Assign the interrupt handler
dma::assignDmaUserHandler(cfg->rxDmaIndex, cfg->rxDmaStream, &spi::dmaRxIrqHandler, hdma_rx);
HAL_NVIC_SetPriority(cfg->rxDmaIrqNumber, cfg->rxPreEmptPriority, cfg->rxSubpriority);
HAL_NVIC_EnableIRQ(cfg->rxDmaIrqNumber);
/* NVIC configuration for DMA transfer complete interrupt (SPI1_TX) */
// Assign the interrupt handler
dma::assignDmaUserHandler(cfg->txDmaIndex, cfg->txDmaStream,
&spi::dmaTxIrqHandler, hdma_tx);
HAL_NVIC_SetPriority(cfg->txDmaIrqNumber, cfg->txPreEmptPriority, cfg->txSubpriority);
HAL_NVIC_EnableIRQ(cfg->txDmaIrqNumber);
}
/**
* @brief SPI MSP De-Initialization
* This function frees the hardware resources used in this example:
* - Disable the Peripheral's clock
* - Revert GPIO, DMA and NVIC configuration to their default state
* @param hspi: SPI handle pointer
* @retval None
*/
void spi::halMspDeinitDma(SPI_HandleTypeDef* hspi, MspCfgBase* cfgBase) {
auto cfg = dynamic_cast<MspDmaConfigStruct*>(cfgBase);
if(hspi == nullptr or cfg == nullptr) {
return;
}
spi::halMspDeinitInterrupt(hspi, cfgBase);
DMA_HandleTypeDef* hdma_tx = NULL;
DMA_HandleTypeDef* hdma_rx = NULL;
spi::getDmaHandles(&hdma_tx, &hdma_rx);
if(hdma_tx == NULL || hdma_rx == NULL) {
printf("HAL_SPI_MspInit: Invalid DMA handles. Make sure to call setDmaHandles!\n");
}
else {
// Disable the DMA
/* De-Initialize the DMA associated to transmission process */
HAL_DMA_DeInit(hdma_tx);
/* De-Initialize the DMA associated to reception process */
HAL_DMA_DeInit(hdma_rx);
}
// Disable the NVIC for DMA
HAL_NVIC_DisableIRQ(cfg->txDmaIrqNumber);
HAL_NVIC_DisableIRQ(cfg->rxDmaIrqNumber);
}
void spi::halMspInitPolling(SPI_HandleTypeDef* hspi, MspCfgBase* cfgBase) {
auto cfg = dynamic_cast<MspPollingConfigStruct*>(cfgBase);
GPIO_InitTypeDef GPIO_InitStruct = {};
/*##-1- Enable peripherals and GPIO Clocks #################################*/
/* Enable GPIO TX/RX clock */
2021-10-27 18:05:18 +02:00
cfg->setupCb();
2021-07-13 19:19:25 +02:00
/*##-2- Configure peripheral GPIO ##########################################*/
/* SPI SCK GPIO pin configuration */
2021-10-27 18:05:18 +02:00
GPIO_InitStruct.Pin = cfg->sck.pin;
2021-07-13 19:19:25 +02:00
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
2021-10-27 18:05:18 +02:00
GPIO_InitStruct.Alternate = cfg->sck.altFnc;
HAL_GPIO_Init(cfg->sck.port, &GPIO_InitStruct);
2021-07-13 19:19:25 +02:00
/* SPI MISO GPIO pin configuration */
2021-10-27 18:05:18 +02:00
GPIO_InitStruct.Pin = cfg->miso.pin;
GPIO_InitStruct.Alternate = cfg->miso.altFnc;
HAL_GPIO_Init(cfg->miso.port, &GPIO_InitStruct);
2021-07-13 19:19:25 +02:00
/* SPI MOSI GPIO pin configuration */
2021-10-27 18:05:18 +02:00
GPIO_InitStruct.Pin = cfg->mosi.pin;
GPIO_InitStruct.Alternate = cfg->mosi.altFnc;
HAL_GPIO_Init(cfg->mosi.port, &GPIO_InitStruct);
2021-07-13 19:19:25 +02:00
}
void spi::halMspDeinitPolling(SPI_HandleTypeDef* hspi, MspCfgBase* cfgBase) {
auto cfg = reinterpret_cast<MspPollingConfigStruct*>(cfgBase);
// Reset peripherals
2021-10-27 18:05:18 +02:00
cfg->cleanupCb();
2021-07-13 19:19:25 +02:00
// Disable peripherals and GPIO Clocks
/* Configure SPI SCK as alternate function */
2021-10-27 18:05:18 +02:00
HAL_GPIO_DeInit(cfg->sck.port, cfg->sck.pin);
2021-07-13 19:19:25 +02:00
/* Configure SPI MISO as alternate function */
2021-10-27 18:05:18 +02:00
HAL_GPIO_DeInit(cfg->miso.port, cfg->miso.pin);
2021-07-13 19:19:25 +02:00
/* Configure SPI MOSI as alternate function */
2021-10-27 18:05:18 +02:00
HAL_GPIO_DeInit(cfg->mosi.port, cfg->mosi.pin);
2021-07-13 19:19:25 +02:00
}
void spi::halMspInitInterrupt(SPI_HandleTypeDef* hspi, MspCfgBase* cfgBase) {
auto cfg = dynamic_cast<MspIrqConfigStruct*>(cfgBase);
if(cfg == nullptr or hspi == nullptr) {
return;
}
spi::halMspInitPolling(hspi, cfg);
// Configure the NVIC for SPI
spi::assignSpiUserHandler(cfg->spiBus, cfg->spiIrqHandler, cfg->spiUserArgs);
HAL_NVIC_SetPriority(cfg->spiIrqNumber, cfg->preEmptPriority, cfg->subpriority);
HAL_NVIC_EnableIRQ(cfg->spiIrqNumber);
}
void spi::halMspDeinitInterrupt(SPI_HandleTypeDef* hspi, MspCfgBase* cfgBase) {
auto cfg = dynamic_cast<MspIrqConfigStruct*>(cfgBase);
spi::halMspDeinitPolling(hspi, cfg);
// Disable the NVIC for SPI
HAL_NVIC_DisableIRQ(cfg->spiIrqNumber);
}
void spi::getMspInitFunction(msp_func_t* init_func, MspCfgBase** args) {
if(init_func != NULL && args != NULL) {
*init_func = mspInitFunc;
*args = mspInitArgs;
}
}
void spi::getMspDeinitFunction(msp_func_t* deinit_func, MspCfgBase** args) {
if(deinit_func != NULL && args != NULL) {
*deinit_func = mspDeinitFunc;
*args = mspDeinitArgs;
}
}
void spi::setSpiDmaMspFunctions(MspDmaConfigStruct* cfg,
msp_func_t initFunc, msp_func_t deinitFunc) {
mspInitFunc = initFunc;
mspDeinitFunc = deinitFunc;
mspInitArgs = cfg;
mspDeinitArgs = cfg;
}
void spi::setSpiIrqMspFunctions(MspIrqConfigStruct *cfg, msp_func_t initFunc,
msp_func_t deinitFunc) {
mspInitFunc = initFunc;
mspDeinitFunc = deinitFunc;
mspInitArgs = cfg;
mspDeinitArgs = cfg;
}
void spi::setSpiPollingMspFunctions(MspPollingConfigStruct *cfg, msp_func_t initFunc,
msp_func_t deinitFunc) {
mspInitFunc = initFunc;
mspDeinitFunc = deinitFunc;
mspInitArgs = cfg;
mspDeinitArgs = cfg;
}
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example:
* - Peripheral's clock enable
* - Peripheral's GPIO Configuration
* - DMA configuration for transmission request by peripheral
* - NVIC configuration for DMA interrupt request enable
* @param hspi: SPI handle pointer
* @retval None
*/
extern "C" void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) {
if(mspInitFunc != NULL) {
mspInitFunc(hspi, mspInitArgs);
}
else {
printf("HAL_SPI_MspInit: Please call set_msp_functions to assign SPI MSP functions\n");
}
}
/**
* @brief SPI MSP De-Initialization
* This function frees the hardware resources used in this example:
* - Disable the Peripheral's clock
* - Revert GPIO, DMA and NVIC configuration to their default state
* @param hspi: SPI handle pointer
* @retval None
*/
extern "C" void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) {
if(mspDeinitFunc != NULL) {
mspDeinitFunc(hspi, mspDeinitArgs);
}
else {
printf("HAL_SPI_MspDeInit: Please call set_msp_functions to assign SPI MSP functions\n");
}
}
void spi::mspErrorHandler(const char* const function, const char *const message) {
printf("%s failure: %s\n", function, message);
}