/**
 ******************************************************************************
 * @file    lan8742.c
 * @author  MCD Application Team
 * @brief   This file provides a set of functions needed to manage the LAN742
 *          PHY devices.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
 * All rights reserved.</center></h2>
 *
 * This software component is licensed by ST under BSD 3-Clause license,
 * the "License"; You may not use this file except in compliance with the
 * License. You may obtain a copy of the License at:
 *                        opensource.org/licenses/BSD-3-Clause
 *
 ******************************************************************************
 */

/* Includes ------------------------------------------------------------------*/
#include "lan8742.h"

/** @addtogroup BSP
 * @{
 */

/** @addtogroup Component
 * @{
 */

/** @defgroup LAN8742 LAN8742
 * @{
 */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup LAN8742_Private_Defines LAN8742 Private Defines
 * @{
 */
#define LAN8742_SW_RESET_TO ((uint32_t)500U)
#define LAN8742_INIT_TO ((uint32_t)2000U)
#define LAN8742_MAX_DEV_ADDR ((uint32_t)31U)
/**
 * @}
 */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup LAN8742_Private_Functions LAN8742 Private Functions
 * @{
 */

/**
 * @brief  Register IO functions to component object
 * @param  pObj: device object  of LAN8742_Object_t.
 * @param  ioctx: holds device IO functions.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_ERROR if missing mandatory function
 */
int32_t LAN8742_RegisterBusIO(lan8742_Object_t *pObj, lan8742_IOCtx_t *ioctx) {
  if (!pObj || !ioctx->ReadReg || !ioctx->WriteReg || !ioctx->GetTick) {
    return LAN8742_STATUS_ERROR;
  }

  pObj->IO.Init = ioctx->Init;
  pObj->IO.DeInit = ioctx->DeInit;
  pObj->IO.ReadReg = ioctx->ReadReg;
  pObj->IO.WriteReg = ioctx->WriteReg;
  pObj->IO.GetTick = ioctx->GetTick;

  return LAN8742_STATUS_OK;
}

/**
 * @brief  Initialize the lan8742 and configure the needed hardware resources
 * @param  pObj: device object LAN8742_Object_t.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_ADDRESS_ERROR if cannot find device address
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 *         LAN8742_STATUS_RESET_TIMEOUT if cannot perform a software reset
 */
int32_t LAN8742_Init(lan8742_Object_t *pObj) {
  uint32_t tickstart = 0, regvalue = 0, addr = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->Is_Initialized == 0) {
    if (pObj->IO.Init != 0) {
      /* GPIO and Clocks initialization */
      pObj->IO.Init();
    }

    /* for later check */
    pObj->DevAddr = LAN8742_MAX_DEV_ADDR + 1;

    /* Get the device address from special mode register */
    for (addr = 0; addr <= LAN8742_MAX_DEV_ADDR; addr++) {
      if (pObj->IO.ReadReg(addr, LAN8742_SMR, &regvalue) < 0) {
        status = LAN8742_STATUS_READ_ERROR;
        /* Can't read from this device address
           continue with next address */
        continue;
      }

      if ((regvalue & LAN8742_SMR_PHY_ADDR) == addr) {
        pObj->DevAddr = addr;
        status = LAN8742_STATUS_OK;
        break;
      }
    }

    if (pObj->DevAddr > LAN8742_MAX_DEV_ADDR) {
      status = LAN8742_STATUS_ADDRESS_ERROR;
    }

    /* if device address is matched */
    if (status == LAN8742_STATUS_OK) {
      /* set a software reset  */
      if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR,
                            LAN8742_BCR_SOFT_RESET) >= 0) {
        /* get software reset status */
        if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &regvalue) >= 0) {
          tickstart = pObj->IO.GetTick();

          /* wait until software reset is done or timeout occured  */
          while (regvalue & LAN8742_BCR_SOFT_RESET) {
            if ((pObj->IO.GetTick() - tickstart) <= LAN8742_SW_RESET_TO) {
              if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &regvalue) < 0) {
                status = LAN8742_STATUS_READ_ERROR;
                break;
              }
            } else {
              status = LAN8742_STATUS_RESET_TIMEOUT;
              break;
            }
          }
        } else {
          status = LAN8742_STATUS_READ_ERROR;
        }
      } else {
        status = LAN8742_STATUS_WRITE_ERROR;
      }
    }
  }

  if (status == LAN8742_STATUS_OK) {
    tickstart = pObj->IO.GetTick();

    /* Wait for 2s to perform initialization */
    while ((pObj->IO.GetTick() - tickstart) <= LAN8742_INIT_TO) {
    }
    pObj->Is_Initialized = 1;
  }

  return status;
}

/**
 * @brief  De-Initialize the lan8742 and it's hardware resources
 * @param  pObj: device object LAN8742_Object_t.
 * @retval None
 */
int32_t LAN8742_DeInit(lan8742_Object_t *pObj) {
  if (pObj->Is_Initialized) {
    if (pObj->IO.DeInit != 0) {
      if (pObj->IO.DeInit() < 0) {
        return LAN8742_STATUS_ERROR;
      }
    }

    pObj->Is_Initialized = 0;
  }

  return LAN8742_STATUS_OK;
}

/**
 * @brief  Disable the LAN8742 power down mode.
 * @param  pObj: device object LAN8742_Object_t.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_DisablePowerDownMode(lan8742_Object_t *pObj) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0) {
    readval &= ~LAN8742_BCR_POWER_DOWN;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Enable the LAN8742 power down mode.
 * @param  pObj: device object LAN8742_Object_t.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_EnablePowerDownMode(lan8742_Object_t *pObj) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0) {
    readval |= LAN8742_BCR_POWER_DOWN;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Start the auto negotiation process.
 * @param  pObj: device object LAN8742_Object_t.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_StartAutoNego(lan8742_Object_t *pObj) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0) {
    readval |= LAN8742_BCR_AUTONEGO_EN;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Get the link state of LAN8742 device.
 * @param  pObj: Pointer to device object.
 * @param  pLinkState: Pointer to link state
 * @retval LAN8742_STATUS_LINK_DOWN  if link is down
 *         LAN8742_STATUS_AUTONEGO_NOTDONE if Auto nego not completed
 *         LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
 *         LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
 *         LAN8742_STATUS_10MBITS_FULLDUPLEX  if 10Mb/s FD
 *         LAN8742_STATUS_10MBITS_HALFDUPLEX  if 10Mb/s HD
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_GetLinkState(lan8742_Object_t *pObj) {
  uint32_t readval = 0;

  /* Read Status register  */
  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BSR, &readval) < 0) {
    return LAN8742_STATUS_READ_ERROR;
  }

  /* Read Status register again */
  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BSR, &readval) < 0) {
    return LAN8742_STATUS_READ_ERROR;
  }

  if ((readval & LAN8742_BSR_LINK_STATUS) == 0) {
    /* Return Link Down status */
    return LAN8742_STATUS_LINK_DOWN;
  }

  /* Check Auto negotiaition */
  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) < 0) {
    return LAN8742_STATUS_READ_ERROR;
  }

  if ((readval & LAN8742_BCR_AUTONEGO_EN) != LAN8742_BCR_AUTONEGO_EN) {
    if (((readval & LAN8742_BCR_SPEED_SELECT) == LAN8742_BCR_SPEED_SELECT) &&
        ((readval & LAN8742_BCR_DUPLEX_MODE) == LAN8742_BCR_DUPLEX_MODE)) {
      return LAN8742_STATUS_100MBITS_FULLDUPLEX;
    } else if ((readval & LAN8742_BCR_SPEED_SELECT) ==
               LAN8742_BCR_SPEED_SELECT) {
      return LAN8742_STATUS_100MBITS_HALFDUPLEX;
    } else if ((readval & LAN8742_BCR_DUPLEX_MODE) == LAN8742_BCR_DUPLEX_MODE) {
      return LAN8742_STATUS_10MBITS_FULLDUPLEX;
    } else {
      return LAN8742_STATUS_10MBITS_HALFDUPLEX;
    }
  } else /* Auto Nego enabled */
  {
    if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_PHYSCSR, &readval) < 0) {
      return LAN8742_STATUS_READ_ERROR;
    }

    /* Check if auto nego not done */
    if ((readval & LAN8742_PHYSCSR_AUTONEGO_DONE) == 0) {
      return LAN8742_STATUS_AUTONEGO_NOTDONE;
    }

    if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_FD) {
      return LAN8742_STATUS_100MBITS_FULLDUPLEX;
    } else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) ==
               LAN8742_PHYSCSR_100BTX_HD) {
      return LAN8742_STATUS_100MBITS_HALFDUPLEX;
    } else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) ==
               LAN8742_PHYSCSR_10BT_FD) {
      return LAN8742_STATUS_10MBITS_FULLDUPLEX;
    } else {
      return LAN8742_STATUS_10MBITS_HALFDUPLEX;
    }
  }
}

/**
 * @brief  Set the link state of LAN8742 device.
 * @param  pObj: Pointer to device object.
 * @param  pLinkState: link state can be one of the following
 *         LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
 *         LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
 *         LAN8742_STATUS_10MBITS_FULLDUPLEX  if 10Mb/s FD
 *         LAN8742_STATUS_10MBITS_HALFDUPLEX  if 10Mb/s HD
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_ERROR  if parameter error
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_SetLinkState(lan8742_Object_t *pObj, uint32_t LinkState) {
  uint32_t bcrvalue = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &bcrvalue) >= 0) {
    /* Disable link config (Auto nego, speed and duplex) */
    bcrvalue &= ~(LAN8742_BCR_AUTONEGO_EN | LAN8742_BCR_SPEED_SELECT |
                  LAN8742_BCR_DUPLEX_MODE);

    if (LinkState == LAN8742_STATUS_100MBITS_FULLDUPLEX) {
      bcrvalue |= (LAN8742_BCR_SPEED_SELECT | LAN8742_BCR_DUPLEX_MODE);
    } else if (LinkState == LAN8742_STATUS_100MBITS_HALFDUPLEX) {
      bcrvalue |= LAN8742_BCR_SPEED_SELECT;
    } else if (LinkState == LAN8742_STATUS_10MBITS_FULLDUPLEX) {
      bcrvalue |= LAN8742_BCR_DUPLEX_MODE;
    } else {
      /* Wrong link status parameter */
      status = LAN8742_STATUS_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  if (status == LAN8742_STATUS_OK) {
    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, bcrvalue) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  }

  return status;
}

/**
 * @brief  Enable loopback mode.
 * @param  pObj: Pointer to device object.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_EnableLoopbackMode(lan8742_Object_t *pObj) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0) {
    readval |= LAN8742_BCR_LOOPBACK;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Disable loopback mode.
 * @param  pObj: Pointer to device object.
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_DisableLoopbackMode(lan8742_Object_t *pObj) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0) {
    readval &= ~LAN8742_BCR_LOOPBACK;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Enable IT source.
 * @param  pObj: Pointer to device object.
 * @param  Interrupt: IT source to be enabled
 *         should be a value or a combination of the following:
 *         LAN8742_WOL_IT
 *         LAN8742_ENERGYON_IT
 *         LAN8742_AUTONEGO_COMPLETE_IT
 *         LAN8742_REMOTE_FAULT_IT
 *         LAN8742_LINK_DOWN_IT
 *         LAN8742_AUTONEGO_LP_ACK_IT
 *         LAN8742_PARALLEL_DETECTION_FAULT_IT
 *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_EnableIT(lan8742_Object_t *pObj, uint32_t Interrupt) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_IMR, &readval) >= 0) {
    readval |= Interrupt;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_IMR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Disable IT source.
 * @param  pObj: Pointer to device object.
 * @param  Interrupt: IT source to be disabled
 *         should be a value or a combination of the following:
 *         LAN8742_WOL_IT
 *         LAN8742_ENERGYON_IT
 *         LAN8742_AUTONEGO_COMPLETE_IT
 *         LAN8742_REMOTE_FAULT_IT
 *         LAN8742_LINK_DOWN_IT
 *         LAN8742_AUTONEGO_LP_ACK_IT
 *         LAN8742_PARALLEL_DETECTION_FAULT_IT
 *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 *         LAN8742_STATUS_WRITE_ERROR if connot write to register
 */
int32_t LAN8742_DisableIT(lan8742_Object_t *pObj, uint32_t Interrupt) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_IMR, &readval) >= 0) {
    readval &= ~Interrupt;

    /* Apply configuration */
    if (pObj->IO.WriteReg(pObj->DevAddr, LAN8742_IMR, readval) < 0) {
      status = LAN8742_STATUS_WRITE_ERROR;
    }
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Clear IT flag.
 * @param  pObj: Pointer to device object.
 * @param  Interrupt: IT flag to be cleared
 *         should be a value or a combination of the following:
 *         LAN8742_WOL_IT
 *         LAN8742_ENERGYON_IT
 *         LAN8742_AUTONEGO_COMPLETE_IT
 *         LAN8742_REMOTE_FAULT_IT
 *         LAN8742_LINK_DOWN_IT
 *         LAN8742_AUTONEGO_LP_ACK_IT
 *         LAN8742_PARALLEL_DETECTION_FAULT_IT
 *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
 * @retval LAN8742_STATUS_OK  if OK
 *         LAN8742_STATUS_READ_ERROR if connot read register
 */
int32_t LAN8742_ClearIT(lan8742_Object_t *pObj, uint32_t Interrupt) {
  uint32_t readval = 0;
  int32_t status = LAN8742_STATUS_OK;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_ISFR, &readval) < 0) {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @brief  Get IT Flag status.
 * @param  pObj: Pointer to device object.
 * @param  Interrupt: IT Flag to be checked,
 *         should be a value or a combination of the following:
 *         LAN8742_WOL_IT
 *         LAN8742_ENERGYON_IT
 *         LAN8742_AUTONEGO_COMPLETE_IT
 *         LAN8742_REMOTE_FAULT_IT
 *         LAN8742_LINK_DOWN_IT
 *         LAN8742_AUTONEGO_LP_ACK_IT
 *         LAN8742_PARALLEL_DETECTION_FAULT_IT
 *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
 * @retval 1 IT flag is SET
 *         0 IT flag is RESET
 *         LAN8742_STATUS_READ_ERROR if connot read register
 */
int32_t LAN8742_GetITStatus(lan8742_Object_t *pObj, uint32_t Interrupt) {
  uint32_t readval = 0;
  int32_t status = 0;

  if (pObj->IO.ReadReg(pObj->DevAddr, LAN8742_ISFR, &readval) >= 0) {
    status = ((readval & Interrupt) == Interrupt);
  } else {
    status = LAN8742_STATUS_READ_ERROR;
  }

  return status;
}

/**
 * @}
 */

/**
 * @}
 */

/**
 * @}
 */

/**
 * @}
 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/