fsfw-example-stm32h7-rtems/README.md

<img align="center" src="https://egit.irs.uni-stuttgart.de/fsfw/fsfw/raw/branch/mueller/master/misc/logo/FSFW_Logo_V3_bw.png" width="50%">

# <a id="top"></a> <a name="linux"></a> FSFW Example Application

This repository features a demo application. The example has been run successfully on the following 
platforms:

 - Linux host machine with the Linux OSAL or the Host OSAL
 - Windows with the Host OSAL
 - STM32H743ZI-Nucleo with the FreeRTOS OSAL
 - Raspberry Pi with the Linux OSAL
 - STM32H743ZI-Nucleo with the RTEMS OSAL

The purpose of this example is to provide a demo of the FSFW capabilities.
However, it can also be used as a starting point to set up a repository for
new flight software. It also aims to provide developers with practical examples
of how the FSFW is inteded to be used and how project using the FSFW should or can be
set up and it might serve as a basic test platform for the FSFW as well to ensure all OSALs
are compiling and running as expected.

The repository contains a Python TMTC program which can be used to showcase
the TMTC capabilities of the FSFW (currently, using the ECSS PUS packet standard).

# Configuring the Example

The build system will copy three configuration files into the build directory:

1. `commonConfig.h` which contains common configuration parameters
2. `OBSWConfig.h` which can contain machine and architecture specific configuration options
3. `FSFWConfig.h` which contains the configuration for the flight software framework

These files can be edited manually after `CMake` build generation.

# Index

[Getting started with Eclipse for C/C++](https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-common/src/branch/master/doc/README-eclipse.md)<br>
[Getting started with CMake](https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-common/src/branch/master/doc/README-cmake.md)<br>

[Getting started with the Hosted OSAL](#this)<br>
[Getting started with the FreeRTOS OSAL on a STM32](https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-stm32h7-freertos)<br>
[Getting started with the RTEMS OSAL on a STM32](https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-stm32h7-rtems)<br>
[Getting started with the Raspberry Pi](https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-linux-mcu)<br>
[Getting started with the Beagle Bone Black](https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-linux-mcu)<br>

# FSFW demo with FreeRTOS OSAL on the STM32H743ZI

This demo can be run on a STM32H743ZI-Nucleo board with the RTEMS OSAL.

## General information

The board is flashed and debugged with OpenOCD and this README specifies on how to make
this work with the Eclipse IDE. Other IDEs or the command line can be used as well as
long as OpenOCD integration is given. Debug otuput can be read directly from the USB 
connection to the board.

## Prerequisite

1. [RTEMS BSP](https://docs.rtems.org/branches/master/user/bsps/bsps-arm.html#id25) 
   `arm/stm32h7` installed (`arm-rtems6`)
1. [MinGW64](https://www.msys2.org/) or [Ninja Build](https://ninja-build.org/) installed on Windows.
   Not required on Linux.
3. Recommended for application code development: 
   [Eclipse for C/C++](https://www.eclipse.org/downloads/packages/) installed with the Eclipse MCU 
   plugin
4. [OpenOCD](https://xpack.github.io/openocd/) installed for Eclipse debugging
5. STM32 USB drivers installed

# Building the software with CMake

On Windows, the following steps should be performed inside the MinGW64 console 
after installing MSYS2. It is recommended to still use git for Windows for the git
related steps.

1. Clone this repository
   ```sh
   git clone https://egit.irs.uni-stuttgart.de/fsfw/fsfw_example.git
   ```

2. Set up submodules
   ```sh
   git submodule init
   git submodule update
   ```
   
3. Navigate into the cloned repository and create a folder for the build. We will create a 
   Debug build folder.

   ```sh
   mkdir build-Debug
   cd build-Debug
   ```
   
4. Ensure that the RTEMS ARM compiler has been added to the path and can be called 
   from the command line. For example, the following command should work:

   ```sh
   arm-rtems6-gcc --version
   ```
   
   Now we will create the build configuration for cross-compilation of an ARM target.
   On Linux, run the following command:
   
   ```sh
   cmake -G "Unix Makefiles" -DOS_FSFW=rtems -DCMAKE_BUILD_TYPE=Debug -DTGT_BSP=arm/stm32h743zi-nucleo ..
   ```
   
   On Windows, use the following command:
   
   ```sh
   cmake -G "MinGW Makefiles" -DOS_FSFW=rtems -DCMAKE_BUILD_TYPE=Debug -DTGT_BSP=arm/stm32h743zi-nucleo ..
   ```
   
   The build configuration can also be performed with the shell scripts located inside 
   `cmake/scripts/RTEMS` or the Python helper script `cmake_build_config.py` inside 
   `cmake/scripts`.
   
5. Build the application
   
   ```sh
   cmake --build . -j
   ```
   The application will be located inside the Debug folder and has been compiled for 
   the flash memory.
   
6. You can test the application by first connecting the STM32H743ZI-Nucleo via USB.
   The device should now show up in the list of connected devices (make sure the USB drivers are 
   installed as well). Drag and drop the binary file into the connected device to flash it. 
   The debug output is also sent via the connected USB port and a blink pattern (1 second interval) 
   can be used to verify the software is running properly.
   
# Setting up the prerequisites

Building a software for RTEMS generally requires building a cross-compiler toolchain for the target
architecture first and then building a board or chip specific BSP. 
The [RTEMS QuickStart Guide](https://docs.rtems.org/branches/master/user/start/index.html)
specifies the general steps required to build a BSP. The following steps will show how
to build the `arm/nucleo-h743zi` BSP required for the STM32H743ZI-Nucleo board. It is recommended to
build the BSP on Linux because the build process in Windows has proven problematic
numerous times. On Windows, it is recommended to download a pre-compiled tool suite or
build cross-compile the toolchain for Windows on a Linux system. The BSP build process with `waf`
should work on both OSes without issues.

For Linux, it is recommended you clone and follow the steps specified in this 
[respository](https://github.com/rmspacefish/rtems-tools). In any case, it is recommended
to use [this fork](https://github.com/rmspacefish/rtems/tree/mueller/master) to build the BSP
from the RTEMS sources because it contains important fixes for the relatively new
`arm/nucleo-h743zi` BSP.

You can also download the pre-compiled toolchains from 
[here](https://drive.google.com/drive/folders/15pO3FCUwceghrnYjmNlgC6K1Z8D_6iu2?usp=sharing)

## Windows

You can install the [STM32 USB drivers](https://www.st.com/en/development-tools/stsw-link009.html)

## Linux

You can install the STM32 USB drivers on Ubuntu with the following command

```sh
sudo apt-get install stlink-tools
```

# Setting up Eclipse for comfortable development

The separate [Eclipse README](README-eclipse#top) specifies how to set up Eclipse.
The STM32 configuration uses the xPacks OpenOCD and the xPacks ARM Toolchain, so those should be
installed as well. OpenOCD should be configured correctly in the STM32 launch configurations.

It is recommended to use the given project files which include a RTEMS configuration 
which only requires a few steps to work properly. When using the project files,
go to the project properties &rarr; C/C++ Build &rarr; Build Variables and adapt the
build variable `RTEMS_PREFIX` to point to your RTEMS prefix location, for example
`$HOME/RTEMS/rtems-tools/rtems/6`. After that, Eclipse should be able to autodetermine the 
BSP specific include paths. 

# Troubleshooting

## OpenOCD errors

If you get the following error in OpenOCD: "Error: auto_probe failed", this could be related from
switching between FreeRTOS and RTEMS. You can try the following steps:

1. First way:  Flash the binary manually by drag & droping the binary into the USB drive manually 
   once
   
2. Second way: Add -c "gdb_memory_map disable" to the OpenOCD arguments (in Eclipse) and run once.
   Debugging might not be possible, so remove it for subsequent runs.

3. Third way (most reliable): Add the following lines to the `stm32h7x.cfg` file located inside 
   the OpenOCD folder inside the `scripts/target` folder:

   ```sh
   $_CHIPNAME.cpu0 configure -event gdb-attach {
       halt
   }

   $_CHIPNAME.cpu0 configure -event gdb-attach {
       reset init
   }
   ```