<?xml version="1.0" encoding="utf-8" standalone="no"?>
<!--
Copyright (c) 2023 STMicroelectronics.
SPDX-License-Identifier: Apache-2.0
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<device schemaVersion="1.1"
xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"
xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd">
<name>STM32H743</name>
<version>1.8</version>
<description>STM32H743</description>
<cpu>
<name>CM7</name>
<revision>r0p1</revision>
<endian>little</endian>
<mpuPresent>true</mpuPresent>
<fpuPresent>true</fpuPresent>
<nvicPrioBits>4</nvicPrioBits>
<vendorSystickConfig>false</vendorSystickConfig>
</cpu>
<addressUnitBits>8</addressUnitBits>
<width>32</width>
<size>0x20</size>
<resetValue>0x0</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<peripherals>
<peripheral>
<name>COMP1</name>
<description>COMP1</description>
<groupName>COMP1</groupName>
<baseAddress>0x58003800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>COMP</name>
<description>COMP1 and COMP2</description>
<value>137</value>
</interrupt>
<registers>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>Comparator status register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>C1VAL</name>
<description>COMP channel 1 output status
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C2VAL</name>
<description>COMP channel 2 output status
bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C1IF</name>
<description>COMP channel 1 Interrupt
Flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C2IF</name>
<description>COMP channel 2 Interrupt
Flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICFR</name>
<displayName>ICFR</displayName>
<description>Comparator interrupt clear flag
register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC1IF</name>
<description>Clear COMP channel 1 Interrupt
Flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IF</name>
<description>Clear COMP channel 2 Interrupt
Flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OR</name>
<displayName>OR</displayName>
<description>Comparator option register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AFOP</name>
<description>Selection of source for alternate
function of output ports</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>OR</name>
<description>Option Register</description>
<bitOffset>11</bitOffset>
<bitWidth>21</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR1</name>
<displayName>CFGR1</displayName>
<description>Comparator configuration register
1</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>COMP channel 1 enable bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRGEN</name>
<description>Scaler bridge enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCALEN</name>
<description>Voltage scaler enable bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POLARITY</name>
<description>COMP channel 1 polarity selection
bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITEN</name>
<description>COMP channel 1 interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>COMP channel 1 hysteresis selection
bits</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PWRMODE</name>
<description>Power Mode of the COMP channel
1</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>INMSEL</name>
<description>COMP channel 1 inverting input selection
field</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>INPSEL</name>
<description>COMP channel 1 non-inverting input
selection bit</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANKING</name>
<description>COMP channel 1 blanking source selection
bits</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR2</name>
<displayName>CFGR2</displayName>
<description>Comparator configuration register
2</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>COMP channel 1 enable bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRGEN</name>
<description>Scaler bridge enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCALEN</name>
<description>Voltage scaler enable bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POLARITY</name>
<description>COMP channel 1 polarity selection
bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMODE</name>
<description>Window comparator mode selection
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITEN</name>
<description>COMP channel 1 interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>COMP channel 1 hysteresis selection
bits</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PWRMODE</name>
<description>Power Mode of the COMP channel
1</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>INMSEL</name>
<description>COMP channel 1 inverting input selection
field</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>INPSEL</name>
<description>COMP channel 1 non-inverting input
selection bit</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANKING</name>
<description>COMP channel 1 blanking source selection
bits</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>CRS</name>
<description>CRS</description>
<groupName>CRS</groupName>
<baseAddress>0x40008400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>CRS</name>
<description>Clock Recovery System globa</description>
<value>144</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>CRS control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<resetValue>0x00002000</resetValue>
<fields>
<field>
<name>SYNCOKIE</name>
<description>SYNC event OK interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNCWARNIE</name>
<description>SYNC warning interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ERRIE</name>
<description>Synchronization or trimming error
interrupt enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ESYNCIE</name>
<description>Expected SYNC interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CEN</name>
<description>Frequency error counter enable This bit
enables the oscillator clock for the frequency error
counter. When this bit is set, the CRS_CFGR register
is write-protected and cannot be
modified.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTOTRIMEN</name>
<description>Automatic trimming enable This bit
enables the automatic hardware adjustment of TRIM
bits according to the measured frequency error
between two SYNC events. If this bit is set, the TRIM
bits are read-only. The TRIM value can be adjusted by
hardware by one or two steps at a time, depending on
the measured frequency error value. Refer to
Section7.3.4: Frequency error evaluation and
automatic trimming for more details.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWSYNC</name>
<description>Generate software SYNC event This bit is
set by software in order to generate a software SYNC
event. It is automatically cleared by
hardware.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TRIM</name>
<description>HSI48 oscillator smooth trimming These
bits provide a user-programmable trimming value to
the HSI48 oscillator. They can be programmed to
adjust to variations in voltage and temperature that
influence the frequency of the HSI48. The default
value is 32, which corresponds to the middle of the
trimming interval. The trimming step is around 67 kHz
between two consecutive TRIM steps. A higher TRIM
value corresponds to a higher output frequency. When
the AUTOTRIMEN bit is set, this field is controlled
by hardware and is read-only.</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>This register can be written only when the
frequency error counter is disabled (CEN bit is cleared
in CRS_CR). When the counter is enabled, this register is
write-protected.</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x2022BB7F</resetValue>
<fields>
<field>
<name>RELOAD</name>
<description>Counter reload value RELOAD is the value
to be loaded in the frequency error counter with each
SYNC event. Refer to Section7.3.3: Frequency error
measurement for more details about counter
behavior.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>FELIM</name>
<description>Frequency error limit FELIM contains the
value to be used to evaluate the captured frequency
error value latched in the FECAP[15:0] bits of the
CRS_ISR register. Refer to Section7.3.4: Frequency
error evaluation and automatic trimming for more
details about FECAP evaluation.</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SYNCDIV</name>
<description>SYNC divider These bits are set and
cleared by software to control the division factor of
the SYNC signal.</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SYNCSRC</name>
<description>SYNC signal source selection These bits
are set and cleared by software to select the SYNC
signal source. Note: When using USB LPM (Link Power
Management) and the device is in Sleep mode, the
periodic USB SOF will not be generated by the host.
No SYNC signal will therefore be provided to the CRS
to calibrate the HSI48 on the run. To guarantee the
required clock precision after waking up from Sleep
mode, the LSE or reference clock on the GPIOs should
be used as SYNC signal.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCPOL</name>
<description>SYNC polarity selection This bit is set
and cleared by software to select the input polarity
for the SYNC signal source.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>CRS interrupt and status
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYNCOKF</name>
<description>SYNC event OK flag This flag is set by
hardware when the measured frequency error is smaller
than FELIM * 3. This means that either no adjustment
of the TRIM value is needed or that an adjustment by
one trimming step is enough to compensate the
frequency error. An interrupt is generated if the
SYNCOKIE bit is set in the CRS_CR register. It is
cleared by software by setting the SYNCOKC bit in the
CRS_ICR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCWARNF</name>
<description>SYNC warning flag This flag is set by
hardware when the measured frequency error is greater
than or equal to FELIM * 3, but smaller than FELIM *
128. This means that to compensate the frequency
error, the TRIM value must be adjusted by two steps
or more. An interrupt is generated if the SYNCWARNIE
bit is set in the CRS_CR register. It is cleared by
software by setting the SYNCWARNC bit in the CRS_ICR
register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERRF</name>
<description>Error flag This flag is set by hardware
in case of any synchronization or trimming error. It
is the logical OR of the TRIMOVF, SYNCMISS and
SYNCERR bits. An interrupt is generated if the ERRIE
bit is set in the CRS_CR register. It is cleared by
software in reaction to setting the ERRC bit in the
CRS_ICR register, which clears the TRIMOVF, SYNCMISS
and SYNCERR bits.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ESYNCF</name>
<description>Expected SYNC flag This flag is set by
hardware when the frequency error counter reached a
zero value. An interrupt is generated if the ESYNCIE
bit is set in the CRS_CR register. It is cleared by
software by setting the ESYNCC bit in the CRS_ICR
register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCERR</name>
<description>SYNC error This flag is set by hardware
when the SYNC pulse arrives before the ESYNC event
and the measured frequency error is greater than or
equal to FELIM * 128. This means that the frequency
error is too big (internal frequency too low) to be
compensated by adjusting the TRIM value, and that
some other action should be taken. An interrupt is
generated if the ERRIE bit is set in the CRS_CR
register. It is cleared by software by setting the
ERRC bit in the CRS_ICR register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCMISS</name>
<description>SYNC missed This flag is set by hardware
when the frequency error counter reached value FELIM
* 128 and no SYNC was detected, meaning either that a
SYNC pulse was missed or that the frequency error is
too big (internal frequency too high) to be
compensated by adjusting the TRIM value, and that
some other action should be taken. At this point, the
frequency error counter is stopped (waiting for a
next SYNC) and an interrupt is generated if the ERRIE
bit is set in the CRS_CR register. It is cleared by
software by setting the ERRC bit in the CRS_ICR
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRIMOVF</name>
<description>Trimming overflow or underflow This flag
is set by hardware when the automatic trimming tries
to over- or under-flow the TRIM value. An interrupt
is generated if the ERRIE bit is set in the CRS_CR
register. It is cleared by software by setting the
ERRC bit in the CRS_ICR register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEDIR</name>
<description>Frequency error direction FEDIR is the
counting direction of the frequency error counter
latched in the time of the last SYNC event. It shows
whether the actual frequency is below or above the
target.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FECAP</name>
<description>Frequency error capture FECAP is the
frequency error counter value latched in the time of
the last SYNC event. Refer to Section7.3.4: Frequency
error evaluation and automatic trimming for more
details about FECAP usage.</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>CRS interrupt flag clear
register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYNCOKC</name>
<description>SYNC event OK clear flag Writing 1 to
this bit clears the SYNCOKF flag in the CRS_ISR
register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCWARNC</name>
<description>SYNC warning clear flag Writing 1 to
this bit clears the SYNCWARNF flag in the CRS_ISR
register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERRC</name>
<description>Error clear flag Writing 1 to this bit
clears TRIMOVF, SYNCMISS and SYNCERR bits and
consequently also the ERRF flag in the CRS_ISR
register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ESYNCC</name>
<description>Expected SYNC clear flag Writing 1 to
this bit clears the ESYNCF flag in the CRS_ISR
register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DAC</name>
<description>DAC</description>
<groupName>DAC</groupName>
<baseAddress>0x40007400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>DAC control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN1</name>
<description>DAC channel1 enable This bit is set and
cleared by software to enable/disable DAC
channel1.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEN1</name>
<description>DAC channel1 trigger
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSEL1</name>
<description>DAC channel1 trigger selection These
bits select the external event used to trigger DAC
channel1. Note: Only used if bit TEN1 = 1 (DAC
channel1 trigger enabled).</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>WAVE1</name>
<description>DAC channel1 noise/triangle wave
generation enable These bits are set and cleared by
software. Note: Only used if bit TEN1 = 1 (DAC
channel1 trigger enabled).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MAMP1</name>
<description>DAC channel1 mask/amplitude selector
These bits are written by software to select mask in
wave generation mode or amplitude in triangle
generation mode. = 1011: Unmask bits[11:0] of LFSR/
triangle amplitude equal to 4095</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DMAEN1</name>
<description>DAC channel1 DMA enable This bit is set
and cleared by software.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAUDRIE1</name>
<description>DAC channel1 DMA Underrun Interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CEN1</name>
<description>DAC Channel 1 calibration enable This
bit is set and cleared by software to enable/disable
DAC channel 1 calibration, it can be written only if
bit EN1=0 into DAC_CR (the calibration mode can be
entered/exit only when the DAC channel is disabled)
Otherwise, the write operation is
ignored.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN2</name>
<description>DAC channel2 enable This bit is set and
cleared by software to enable/disable DAC
channel2.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEN2</name>
<description>DAC channel2 trigger
enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSEL2</name>
<description>DAC channel2 trigger selection These
bits select the external event used to trigger DAC
channel2 Note: Only used if bit TEN2 = 1 (DAC
channel2 trigger enabled).</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>WAVE2</name>
<description>DAC channel2 noise/triangle wave
generation enable These bits are set/reset by
software. 1x: Triangle wave generation enabled Note:
Only used if bit TEN2 = 1 (DAC channel2 trigger
enabled)</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MAMP2</name>
<description>DAC channel2 mask/amplitude selector
These bits are written by software to select mask in
wave generation mode or amplitude in triangle
generation mode. = 1011: Unmask bits[11:0] of LFSR/
triangle amplitude equal to 4095</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DMAEN2</name>
<description>DAC channel2 DMA enable This bit is set
and cleared by software.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAUDRIE2</name>
<description>DAC channel2 DMA underrun interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CEN2</name>
<description>DAC Channel 2 calibration enable This
bit is set and cleared by software to enable/disable
DAC channel 2 calibration, it can be written only if
bit EN2=0 into DAC_CR (the calibration mode can be
entered/exit only when the DAC channel is disabled)
Otherwise, the write operation is
ignored.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWTRGR</name>
<displayName>SWTRGR</displayName>
<description>DAC software trigger register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWTRIG1</name>
<description>DAC channel1 software trigger This bit
is set by software to trigger the DAC in software
trigger mode. Note: This bit is cleared by hardware
(one APB1 clock cycle later) once the DAC_DHR1
register value has been loaded into the DAC_DOR1
register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG2</name>
<description>DAC channel2 software trigger This bit
is set by software to trigger the DAC in software
trigger mode. Note: This bit is cleared by hardware
(one APB1 clock cycle later) once the DAC_DHR2
register value has been loaded into the DAC_DOR2
register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR12R1</name>
<displayName>DHR12R1</displayName>
<description>DAC channel1 12-bit right-aligned data
holding register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DHR</name>
<description>DAC channel1 12-bit right-aligned data
These bits are written by software which specifies
12-bit data for DAC channel1.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR12L1</name>
<displayName>DHR12L1</displayName>
<description>DAC channel1 12-bit left aligned data
holding register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DHR</name>
<description>DAC channel1 12-bit left-aligned data
These bits are written by software which specifies
12-bit data for DAC channel1.</description>
<bitOffset>4</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR8R1</name>
<displayName>DHR8R1</displayName>
<description>DAC channel1 8-bit right aligned data
holding register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DHR</name>
<description>DAC channel1 8-bit right-aligned data
These bits are written by software which specifies
8-bit data for DAC channel1.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR12R2</name>
<displayName>DHR12R2</displayName>
<description>DAC channel2 12-bit right aligned data
holding register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC2DHR</name>
<description>DAC channel2 12-bit right-aligned data
These bits are written by software which specifies
12-bit data for DAC channel2.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR12L2</name>
<displayName>DHR12L2</displayName>
<description>DAC channel2 12-bit left aligned data
holding register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC2DHR</name>
<description>DAC channel2 12-bit left-aligned data
These bits are written by software which specify
12-bit data for DAC channel2.</description>
<bitOffset>4</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR8R2</name>
<displayName>DHR8R2</displayName>
<description>DAC channel2 8-bit right-aligned data
holding register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC2DHR</name>
<description>DAC channel2 8-bit right-aligned data
These bits are written by software which specifies
8-bit data for DAC channel2.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR12RD</name>
<displayName>DHR12RD</displayName>
<description>Dual DAC 12-bit right-aligned data holding
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DHR</name>
<description>DAC channel1 12-bit right-aligned data
These bits are written by software which specifies
12-bit data for DAC channel1.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DACC2DHR</name>
<description>DAC channel2 12-bit right-aligned data
These bits are written by software which specifies
12-bit data for DAC channel2.</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR12LD</name>
<displayName>DHR12LD</displayName>
<description>DUAL DAC 12-bit left aligned data holding
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DHR</name>
<description>DAC channel1 12-bit left-aligned data
These bits are written by software which specifies
12-bit data for DAC channel1.</description>
<bitOffset>4</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DACC2DHR</name>
<description>DAC channel2 12-bit left-aligned data
These bits are written by software which specifies
12-bit data for DAC channel2.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DHR8RD</name>
<displayName>DHR8RD</displayName>
<description>DUAL DAC 8-bit right aligned data holding
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DHR</name>
<description>DAC channel1 8-bit right-aligned data
These bits are written by software which specifies
8-bit data for DAC channel1.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DACC2DHR</name>
<description>DAC channel2 8-bit right-aligned data
These bits are written by software which specifies
8-bit data for DAC channel2.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOR1</name>
<displayName>DOR1</displayName>
<description>DAC channel1 data output
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC1DOR</name>
<description>DAC channel1 data output These bits are
read-only, they contain data output for DAC
channel1.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOR2</name>
<displayName>DOR2</displayName>
<description>DAC channel2 data output
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DACC2DOR</name>
<description>DAC channel2 data output These bits are
read-only, they contain data output for DAC
channel2.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>DAC status register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAUDR1</name>
<description>DAC channel1 DMA underrun flag This bit
is set by hardware and cleared by software (by
writing it to 1).</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAL_FLAG1</name>
<description>DAC Channel 1 calibration offset status
This bit is set and cleared by hardware</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BWST1</name>
<description>DAC Channel 1 busy writing sample time
flag This bit is systematically set just after Sample
& Hold mode enable and is set each time the
software writes the register DAC_SHSR1, It is cleared
by hardware when the write operation of DAC_SHSR1 is
complete. (It takes about 3LSI periods of
synchronization).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMAUDR2</name>
<description>DAC channel2 DMA underrun flag This bit
is set by hardware and cleared by software (by
writing it to 1).</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAL_FLAG2</name>
<description>DAC Channel 2 calibration offset status
This bit is set and cleared by hardware</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BWST2</name>
<description>DAC Channel 2 busy writing sample time
flag This bit is systematically set just after Sample
& Hold mode enable and is set each time the
software writes the register DAC_SHSR2, It is cleared
by hardware when the write operation of DAC_SHSR2 is
complete. (It takes about 3 LSI periods of
synchronization).</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<displayName>CCR</displayName>
<description>DAC calibration control
register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OTRIM1</name>
<description>DAC Channel 1 offset trimming
value</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OTRIM2</name>
<description>DAC Channel 2 offset trimming
value</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCR</name>
<displayName>MCR</displayName>
<description>DAC mode control register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MODE1</name>
<description>DAC Channel 1 mode These bits can be
written only when the DAC is disabled and not in the
calibration mode (when bit EN1=0 and bit CEN1 =0 in
the DAC_CR register). If EN1=1 or CEN1 =1 the write
operation is ignored. They can be set and cleared by
software to select the DAC Channel 1 mode: DAC
Channel 1 in normal Mode DAC Channel 1 in sample
&amp; hold mode</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MODE2</name>
<description>DAC Channel 2 mode These bits can be
written only when the DAC is disabled and not in the
calibration mode (when bit EN2=0 and bit CEN2 =0 in
the DAC_CR register). If EN2=1 or CEN2 =1 the write
operation is ignored. They can be set and cleared by
software to select the DAC Channel 2 mode: DAC
Channel 2 in normal Mode DAC Channel 2 in sample
&amp; hold mode</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHSR1</name>
<displayName>SHSR1</displayName>
<description>DAC Sample and Hold sample time register
1</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSAMPLE1</name>
<description>DAC Channel 1 sample Time (only valid in
sample &amp; hold mode) These bits can be written
when the DAC channel1 is disabled or also during
normal operation. in the latter case, the write can
be done only when BWSTx of DAC_SR register is low, If
BWSTx=1, the write operation is
ignored.</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHSR2</name>
<displayName>SHSR2</displayName>
<description>DAC Sample and Hold sample time register
2</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSAMPLE2</name>
<description>DAC Channel 2 sample Time (only valid in
sample &amp; hold mode) These bits can be written
when the DAC channel2 is disabled or also during
normal operation. in the latter case, the write can
be done only when BWSTx of DAC_SR register is low, if
BWSTx=1, the write operation is
ignored.</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHHR</name>
<displayName>SHHR</displayName>
<description>DAC Sample and Hold hold time
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00010001</resetValue>
<fields>
<field>
<name>THOLD1</name>
<description>DAC Channel 1 hold Time (only valid in
sample &amp; hold mode) Hold time= (THOLD[9:0]) x
T LSI</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>THOLD2</name>
<description>DAC Channel 2 hold time (only valid in
sample &amp; hold mode). Hold time= (THOLD[9:0])
x T LSI</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHRR</name>
<displayName>SHRR</displayName>
<description>DAC Sample and Hold refresh time
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00010001</resetValue>
<fields>
<field>
<name>TREFRESH1</name>
<description>DAC Channel 1 refresh Time (only valid
in sample &amp; hold mode) Refresh time=
(TREFRESH[7:0]) x T LSI</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>TREFRESH2</name>
<description>DAC Channel 2 refresh Time (only valid
in sample &amp; hold mode) Refresh time=
(TREFRESH[7:0]) x T LSI</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>BDMA</name>
<description>BDMA</description>
<groupName>BDMA</groupName>
<baseAddress>0x58025400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>BDMA_CH0</name>
<description>BDMA channel 0 interrupt</description>
<value>129</value>
</interrupt>
<interrupt>
<name>BDMA_CH1</name>
<description>BDMA channel 1 interrupt</description>
<value>130</value>
</interrupt>
<interrupt>
<name>BDMA_CH2</name>
<description>BDMA channel 2 interrupt</description>
<value>131</value>
</interrupt>
<interrupt>
<name>BDMA_CH3</name>
<description>BDMA channel 3 interrupt</description>
<value>132</value>
</interrupt>
<interrupt>
<name>BDMA_CH4</name>
<description>BDMA channel 4 interrupt</description>
<value>133</value>
</interrupt>
<interrupt>
<name>BDMA_CH5</name>
<description>BDMA channel 5 interrupt</description>
<value>134</value>
</interrupt>
<interrupt>
<name>BDMA_CH6</name>
<description>BDMA channel 6 interrupt</description>
<value>135</value>
</interrupt>
<interrupt>
<name>BDMA_CH7</name>
<description>BDMA channel 7 interrupt</description>
<value>136</value>
</interrupt>
<registers>
<register>
<name>BDMA_ISR</name>
<displayName>BDMA_ISR</displayName>
<description>BDMA interrupt status register </description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>GIF0</name>
<description>global interrupt flag for channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF0</name>
<description>transfer complete (TC) flag for channel 0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF0</name>
<description>half transfer (HT) flag for channel 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF0</name>
<description>transfer error (TE) flag for channel 0</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF1</name>
<description>global interrupt flag for channel 1</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF1</name>
<description>transfer complete (TC) flag for channel 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF1</name>
<description>half transfer (HT) flag for channel 1</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF1</name>
<description>transfer error (TE) flag for channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF2</name>
<description>global interrupt flag for channel 2</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF2</name>
<description>transfer complete (TC) flag for channel 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF2</name>
<description>half transfer (HT) flag for channel 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF2</name>
<description>transfer error (TE) flag for channel 2</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF3</name>
<description>global interrupt flag for channel 3</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF3</name>
<description>transfer complete (TC) flag for channel 3</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF3</name>
<description>half transfer (HT) flag for channel 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF3</name>
<description>transfer error (TE) flag for channel 3</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF4</name>
<description>global interrupt flag for channel 4</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF4</name>
<description>transfer complete (TC) flag for channel 4</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF4</name>
<description>half transfer (HT) flag for channel 4</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF4</name>
<description>transfer error (TE) flag for channel 4</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF5</name>
<description>global interrupt flag for channel 5</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF5</name>
<description>transfer complete (TC) flag for channel 5</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF5</name>
<description>half transfer (HT) flag for channel 5</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF5</name>
<description>transfer error (TE) flag for channel 5</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF6</name>
<description>global interrupt flag for channel 6</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF6</name>
<description>transfer complete (TC) flag for channel 6</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF6</name>
<description>half transfer (HT) flag for channel 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF6</name>
<description>transfer error (TE) flag for channel 6</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GIF7</name>
<description>global interrupt flag for channel 7</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE, HT or TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE, HT or TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIF7</name>
<description>transfer complete (TC) flag for channel 7</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TC event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TC event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIF7</name>
<description>half transfer (HT) flag for channel 7</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no HT event </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a HT event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIF7</name>
<description>transfer error (TE) flag for channel 7</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>no TE event</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>a TE event occurred</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_IFCR</name>
<displayName>BDMA_IFCR</displayName>
<description>BDMA interrupt flag clear register </description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>CGIF0</name>
<description>global interrupt flag clear for channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF0</name>
<description>transfer complete flag clear for channel 0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF0</name>
<description>half transfer flag clear for channel 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF0</name>
<description>transfer error flag clear for channel 0</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF1</name>
<description>global interrupt flag clear for channel 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF1</name>
<description>transfer complete flag clear for channel 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF1</name>
<description>half transfer flag clear for channel 1</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF1</name>
<description>transfer error flag clear for channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF2</name>
<description>global interrupt flag clear for channel 2</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF2</name>
<description>transfer complete flag clear for channel 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF2</name>
<description>half transfer flag clear for channe2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF2</name>
<description>transfer error flag clear for channel 2</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF3</name>
<description>global interrupt flag clear for channel 3</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF3</name>
<description>transfer complete flag clear for channel 3</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF3</name>
<description>half transfer flag clear for channel 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF3</name>
<description>transfer error flag clear for channel 3</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF4</name>
<description>global interrupt flag clear for channel 4</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF4</name>
<description>transfer complete flag clear for channel 4</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF4</name>
<description>half transfer flag clear for channel 4</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF4</name>
<description>transfer error flag clear for channel 4</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF5</name>
<description>global interrupt flag clear for channel 5</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF5</name>
<description>transfer complete flag clear for channel 5</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF5</name>
<description>half transfer flag clear for channel 5</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF5</name>
<description>transfer error flag clear for channel 5</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF6</name>
<description>global interrupt flag clear for channel 6</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF6</name>
<description>transfer complete flag clear for channel 6</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF6</name>
<description>half transfer flag clear for channel 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF6</name>
<description>transfer error flag clear for channel 6</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGIF7</name>
<description>global interrupt flag clear for channel 7</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTCIF7</name>
<description>transfer complete flag clear for channel 7</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHTIF7</name>
<description>half transfer flag clear for channel 7</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTEIF7</name>
<description>transfer error flag clear for channel 7</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR0</name>
<displayName>BDMA_CCR0</displayName>
<description>BDMA channel 0 configuration register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR0</name>
<displayName>BDMA_CNDTR0</displayName>
<addressOffset>0xc</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR0</name>
<displayName>BDMA_CPAR0</displayName>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR0</name>
<displayName>BDMA_CM0AR0</displayName>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR0</name>
<displayName>BDMA_CM1AR0</displayName>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR1</name>
<displayName>BDMA_CCR1</displayName>
<description>BDMA channel 1 configuration register</description>
<addressOffset>0x1c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR1</name>
<displayName>BDMA_CNDTR1</displayName>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR1</name>
<displayName>BDMA_CPAR1</displayName>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR1</name>
<displayName>BDMA_CM0AR1</displayName>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR1</name>
<displayName>BDMA_CM1AR1</displayName>
<addressOffset>0x2c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR2</name>
<displayName>BDMA_CCR2</displayName>
<description>BDMA channel 2 configuration register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR2</name>
<displayName>BDMA_CNDTR2</displayName>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR2</name>
<displayName>BDMA_CPAR2</displayName>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR2</name>
<displayName>BDMA_CM0AR2</displayName>
<addressOffset>0x3c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR2</name>
<displayName>BDMA_CM1AR2</displayName>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR3</name>
<displayName>BDMA_CCR3</displayName>
<description>BDMA channel 3 configuration register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR3</name>
<displayName>BDMA_CNDTR3</displayName>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR3</name>
<displayName>BDMA_CPAR3</displayName>
<addressOffset>0x4c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR3</name>
<displayName>BDMA_CM0AR3</displayName>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR3</name>
<displayName>BDMA_CM1AR3</displayName>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR4</name>
<displayName>BDMA_CCR4</displayName>
<description>BDMA channel 4 configuration register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR4</name>
<displayName>BDMA_CNDTR4</displayName>
<addressOffset>0x5c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR4</name>
<displayName>BDMA_CPAR4</displayName>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR4</name>
<displayName>BDMA_CM0AR4</displayName>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR4</name>
<displayName>BDMA_CM1AR4</displayName>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR5</name>
<displayName>BDMA_CCR5</displayName>
<description>BDMA channel 5 configuration register</description>
<addressOffset>0x6c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR5</name>
<displayName>BDMA_CNDTR5</displayName>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR5</name>
<displayName>BDMA_CPAR5</displayName>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR5</name>
<displayName>BDMA_CM0AR5</displayName>
<addressOffset>0x78</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR5</name>
<displayName>BDMA_CM1AR5</displayName>
<addressOffset>0x7c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR6</name>
<displayName>BDMA_CCR6</displayName>
<description>BDMA channel 6 configuration register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR6</name>
<displayName>BDMA_CNDTR6</displayName>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR6</name>
<displayName>BDMA_CPAR6</displayName>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR6</name>
<displayName>BDMA_CM0AR6</displayName>
<addressOffset>0x8c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR6</name>
<displayName>BDMA_CM1AR6</displayName>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CCR7</name>
<displayName>BDMA_CCR7</displayName>
<description>BDMA channel 7 configuration register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>EN</name>
<description>channel enable
When a channel transfer error occurs, this bit is cleared by hardware. It can not be set again by software (channel x re-activated) until the TEIFx bit of the BDMA_ISR register is cleared (by setting the CTEIFx bit of the BDMA_IFCR register).
Note: this bit is set and cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCIE</name>
<description>transfer complete interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HTIE</name>
<description>half transfer interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEIE</name>
<description>transfer error interrupt enable
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIR</name>
<description>data transfer direction
This bit must be set only in memory-to-peripheral and peripheral-to-memory modes.
Source attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Destination attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Destination attributes are defined by PSIZE and PINC, plus the BDMA_CPARx register. This is still valid in a memory-to-memory mode.
Source attributes are defined by MSIZE and MINC, plus the BDMA_CM0/1ARx register. This is still valid in a peripheral-to-peripheral mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>read from peripheral</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>read from memory</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIRC</name>
<description>circular mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PINC</name>
<description>peripheral increment mode
Defines the increment mode for each DMA transfer to the identified peripheral.
n memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MINC</name>
<description>memory increment mode
Defines the increment mode for each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PSIZE</name>
<description>peripheral size
Defines the data size of each DMA transfer to the identified peripheral.
In memory-to-memory mode, this field identifies the memory destination if DIR = 1 and the memory source if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral destination if DIR = 1 and the peripheral source if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSIZE</name>
<description>memory size
Defines the data size of each DMA transfer to the identified memory.
In memory-to-memory mode, this field identifies the memory source if DIR = 1 and the memory destination if DIR = 0.
In peripheral-to-peripheral mode, this field identifies the peripheral source if DIR = 1 and the peripheral destination if DIR = 0.
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>16 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>32 bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PL</name>
<description>priority level
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>low</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>medium</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>high</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>very high</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEM2MEM</name>
<description>memory-to-memory mode
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DBM</name>
<description>double-buffer mode
This bit must be set only in memory-to-peripheral and peripheral-to-memory transfers (MEM2MEM=0). The CIRC bit must also be set in double buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>disabled (no memory address switch at the end of the BDMA transfer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>enabled (memory address switched at the end of the BDMA transfer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CT</name>
<description>current target memory of DMA transfer in double-buffer mode
This bit is toggled by hardware at the end of each channel transfer in double-buffer mode.
Note: this bit is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>memory 0 (addressed by the BDMA_CM0AR pointer)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>memory 1 (addressed by the BDMA_CM1AR pointer)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BDMA_CNDTR7</name>
<displayName>BDMA_CNDTR7</displayName>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>NDT</name>
<description>number of data to transfer (0 to 216 - 1)
This field is updated by hardware when the channel is enabled:
It is decremented after each single BDMA ‘read followed by write’ transfer, indicating the remaining amount of data items to transfer.
It is kept at zero when the programmed amount of data to transfer is reached, if the channel is not in circular mode (CIRC = 0 in the BDMA_CCRx register).
It is reloaded automatically by the previously programmed value, when the transfer is complete, if the channel is in circular mode (CIRC = 1).
If this field is zero, no transfer can be served whatever the channel status (enabled or not).
Note: this field is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CPAR7</name>
<displayName>BDMA_CPAR7</displayName>
<addressOffset>0x9c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>PA</name>
<description>peripheral address
It contains the base address of the peripheral data register from/to which the data is read/written.
When PSIZE[1:0] = 01 (16 bits), bit 0 of PA[31:0] is ignored. Access is automatically aligned to a half-word address.
When PSIZE = 10 (32 bits), bits 1 and 0 of PA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory destination address if DIR = 1 and the memory source address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral destination address DIR = 1 and the peripheral source address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM0AR7</name>
<displayName>BDMA_CM0AR7</displayName>
<addressOffset>0xa0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>BDMA_CM1AR7</name>
<displayName>BDMA_CM1AR7</displayName>
<addressOffset>0xa4</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>MA</name>
<description>peripheral address
It contains the base address of the memory from/to which the data is read/written.
When MSIZE[1:0] = 01 (16 bits), bit 0 of MA[31:0] is ignored. Access is automatically aligned to a half-word address.
When MSIZE = 10 (32 bits), bits 1 and 0 of MA[31:0] are ignored. Access is automatically aligned to a word address.
In memory-to-memory mode, this register identifies the memory source address if DIR = 1 and the memory destination address if DIR = 0.
In peripheral-to-peripheral mode, this register identifies the peripheral source address DIR = 1 and the peripheral destination address if DIR = 0.
Note: this register is set and cleared by software.
It must not be written when the channel is enabled (EN = 1).
It is not read-only when the channel is enabled (EN = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMA2D</name>
<description>DMA2D</description>
<groupName>DMA2D</groupName>
<baseAddress>0x52001000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMA2D</name>
<description>DMA2D global interrupt</description>
<value>90</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>DMA2D control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>START</name>
<description>Start This bit can be used to launch the
DMA2D according to the parameters loaded in the
various configuration registers</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Suspend This bit can be used to suspend
the current transfer. This bit is set and reset by
software. It is automatically reset by hardware when
the START bit is reset.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABORT</name>
<description>Abort This bit can be used to abort the
current transfer. This bit is set by software and is
automatically reset by hardware when the START bit is
reset.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt enable This
bit is set and cleared by software.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TWIE</name>
<description>Transfer watermark interrupt enable This
bit is set and cleared by software.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAEIE</name>
<description>CLUT access error interrupt enable This
bit is set and cleared by software.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIE</name>
<description>CLUT transfer complete interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CEIE</name>
<description>Configuration Error Interrupt Enable
This bit is set and cleared by
software.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>DMA2D mode This bit is set and cleared
by software. It cannot be modified while a transfer
is ongoing.</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>DMA2D Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF</name>
<description>Transfer error interrupt flag This bit
is set when an error occurs during a DMA transfer
(data transfer or automatic CLUT
loading).</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF</name>
<description>Transfer complete interrupt flag This
bit is set when a DMA2D transfer operation is
complete (data transfer only).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TWIF</name>
<description>Transfer watermark interrupt flag This
bit is set when the last pixel of the watermarked
line has been transferred.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAEIF</name>
<description>CLUT access error interrupt flag This
bit is set when the CPU accesses the CLUT while the
CLUT is being automatically copied from a system
memory to the internal DMA2D.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF</name>
<description>CLUT transfer complete interrupt flag
This bit is set when the CLUT copy from a system
memory area to the internal DMA2D memory is
complete.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CEIF</name>
<description>Configuration error interrupt flag This
bit is set when the START bit of DMA2D_CR,
DMA2DFGPFCCR or DMA2D_BGPFCCR is set and a wrong
configuration has been programmed.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IFCR</name>
<displayName>IFCR</displayName>
<description>DMA2D interrupt flag clear
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF</name>
<description>Clear Transfer error interrupt flag
Programming this bit to 1 clears the TEIF flag in the
DMA2D_ISR register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF</name>
<description>Clear transfer complete interrupt flag
Programming this bit to 1 clears the TCIF flag in the
DMA2D_ISR register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTWIF</name>
<description>Clear transfer watermark interrupt flag
Programming this bit to 1 clears the TWIF flag in the
DMA2D_ISR register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAECIF</name>
<description>Clear CLUT access error interrupt flag
Programming this bit to 1 clears the CAEIF flag in
the DMA2D_ISR register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF</name>
<description>Clear CLUT transfer complete interrupt
flag Programming this bit to 1 clears the CTCIF flag
in the DMA2D_ISR register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCEIF</name>
<description>Clear configuration error interrupt flag
Programming this bit to 1 clears the CEIF flag in the
DMA2D_ISR register</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FGMAR</name>
<displayName>FGMAR</displayName>
<description>DMA2D foreground memory address
register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MA</name>
<description>Memory address Address of the data used
for the foreground image. This register can only be
written when data transfers are disabled. Once the
data transfer has started, this register is
read-only. The address alignment must match the image
format selected e.g. a 32-bit per pixel format must
be 32-bit aligned, a 16-bit per pixel format must be
16-bit aligned and a 4-bit per pixel format must be
8-bit aligned.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FGOR</name>
<displayName>FGOR</displayName>
<description>DMA2D foreground offset
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LO</name>
<description>Line offset Line offset used for the
foreground expressed in pixel. This value is used to
generate the address. It is added at the end of each
line to determine the starting address of the next
line. These bits can only be written when data
transfers are disabled. Once a data transfer has
started, they become read-only. If the image format
is 4-bit per pixel, the line offset must be
even.</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>BGMAR</name>
<displayName>BGMAR</displayName>
<description>DMA2D background memory address
register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MA</name>
<description>Memory address Address of the data used
for the background image. This register can only be
written when data transfers are disabled. Once a data
transfer has started, this register is read-only. The
address alignment must match the image format
selected e.g. a 32-bit per pixel format must be
32-bit aligned, a 16-bit per pixel format must be
16-bit aligned and a 4-bit per pixel format must be
8-bit aligned.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>BGOR</name>
<displayName>BGOR</displayName>
<description>DMA2D background offset
register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LO</name>
<description>Line offset Line offset used for the
background image (expressed in pixel). This value is
used for the address generation. It is added at the
end of each line to determine the starting address of
the next line. These bits can only be written when
data transfers are disabled. Once data transfer has
started, they become read-only. If the image format
is 4-bit per pixel, the line offset must be
even.</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>FGPFCCR</name>
<displayName>FGPFCCR</displayName>
<description>DMA2D foreground PFC control
register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CM</name>
<description>Color mode These bits defines the color
format of the foreground image. They can only be
written when data transfers are disabled. Once the
transfer has started, they are read-only. others:
meaningless</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CCM</name>
<description>CLUT color mode This bit defines the
color format of the CLUT. It can only be written when
the transfer is disabled. Once the CLUT transfer has
started, this bit is read-only.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START</name>
<description>Start This bit can be set to start the
automatic loading of the CLUT. It is automatically
reset: ** at the end of the transfer ** when the
transfer is aborted by the user application by
setting the ABORT bit in DMA2D_CR ** when a transfer
error occurs ** when the transfer has not started due
to a configuration error or another transfer
operation already ongoing (data transfer or automatic
background CLUT transfer).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CS</name>
<description>CLUT size These bits define the size of
the CLUT used for the foreground image. Once the CLUT
transfer has started, this field is read-only. The
number of CLUT entries is equal to CS[7:0] +
1.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AM</name>
<description>Alpha mode These bits select the alpha
channel value to be used for the foreground image.
They can only be written data the transfer are
disabled. Once the transfer has started, they become
read-only. other configurations are
meaningless</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CSS</name>
<description>Chroma Sub-Sampling These bits define
the chroma sub-sampling mode for YCbCr color mode.
Once the transfer has started, these bits are
read-only. others: meaningless</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>AI</name>
<description>Alpha Inverted This bit inverts the
alpha value. Once the transfer has started, this bit
is read-only.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RBS</name>
<description>Red Blue Swap This bit allows to swap
the R &amp; B to support BGR or ABGR color
formats. Once the transfer has started, this bit is
read-only.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALPHA</name>
<description>Alpha value These bits define a fixed
alpha channel value which can replace the original
alpha value or be multiplied by the original alpha
value according to the alpha mode selected through
the AM[1:0] bits. These bits can only be written when
data transfers are disabled. Once a transfer has
started, they become read-only.</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FGCOLR</name>
<displayName>FGCOLR</displayName>
<description>DMA2D foreground color
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BLUE</name>
<description>Blue Value These bits defines the blue
value for the A4 or A8 mode of the foreground image.
They can only be written when data transfers are
disabled. Once the transfer has started, They are
read-only.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>GREEN</name>
<description>Green Value These bits defines the green
value for the A4 or A8 mode of the foreground image.
They can only be written when data transfers are
disabled. Once the transfer has started, They are
read-only.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RED</name>
<description>Red Value These bits defines the red
value for the A4 or A8 mode of the foreground image.
They can only be written when data transfers are
disabled. Once the transfer has started, they are
read-only.</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>BGPFCCR</name>
<displayName>BGPFCCR</displayName>
<description>DMA2D background PFC control
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CM</name>
<description>Color mode These bits define the color
format of the foreground image. These bits can only
be written when data transfers are disabled. Once the
transfer has started, they are read-only. others:
meaningless</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CCM</name>
<description>CLUT Color mode These bits define the
color format of the CLUT. This register can only be
written when the transfer is disabled. Once the CLUT
transfer has started, this bit is
read-only.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START</name>
<description>Start This bit is set to start the
automatic loading of the CLUT. This bit is
automatically reset: ** at the end of the transfer **
when the transfer is aborted by the user application
by setting the ABORT bit in the DMA2D_CR ** when a
transfer error occurs ** when the transfer has not
started due to a configuration error or another
transfer operation already on going (data transfer or
automatic BackGround CLUT transfer).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CS</name>
<description>CLUT size These bits define the size of
the CLUT used for the BG. Once the CLUT transfer has
started, this field is read-only. The number of CLUT
entries is equal to CS[7:0] + 1.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AM</name>
<description>Alpha mode These bits define which alpha
channel value to be used for the background image.
These bits can only be written when data transfers
are disabled. Once the transfer has started, they are
read-only. others: meaningless</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>AI</name>
<description>Alpha Inverted This bit inverts the
alpha value. Once the transfer has started, this bit
is read-only.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RBS</name>
<description>Red Blue Swap This bit allows to swap
the R &amp; B to support BGR or ABGR color
formats. Once the transfer has started, this bit is
read-only.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALPHA</name>
<description>Alpha value These bits define a fixed
alpha channel value which can replace the original
alpha value or be multiplied with the original alpha
value according to the alpha mode selected with bits
AM[1: 0]. These bits can only be written when data
transfers are disabled. Once the transfer has
started, they are read-only.</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>BGCOLR</name>
<displayName>BGCOLR</displayName>
<description>DMA2D background color
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BLUE</name>
<description>Blue Value These bits define the blue
value for the A4 or A8 mode of the background. These
bits can only be written when data transfers are
disabled. Once the transfer has started, they are
read-only.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>GREEN</name>
<description>Green Value These bits define the green
value for the A4 or A8 mode of the background. These
bits can only be written when data transfers are
disabled. Once the transfer has started, they are
read-only.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RED</name>
<description>Red Value These bits define the red
value for the A4 or A8 mode of the background. These
bits can only be written when data transfers are
disabled. Once the transfer has started, they are
read-only.</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FGCMAR</name>
<displayName>FGCMAR</displayName>
<description>DMA2D foreground CLUT memory address
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MA</name>
<description>Memory Address Address of the data used
for the CLUT address dedicated to the foreground
image. This register can only be written when no
transfer is ongoing. Once the CLUT transfer has
started, this register is read-only. If the
foreground CLUT format is 32-bit, the address must be
32-bit aligned.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>BGCMAR</name>
<displayName>BGCMAR</displayName>
<description>DMA2D background CLUT memory address
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MA</name>
<description>Memory address Address of the data used
for the CLUT address dedicated to the background
image. This register can only be written when no
transfer is on going. Once the CLUT transfer has
started, this register is read-only. If the
background CLUT format is 32-bit, the address must be
32-bit aligned.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPFCCR</name>
<displayName>OPFCCR</displayName>
<description>DMA2D output PFC control
register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CM</name>
<description>Color mode These bits define the color
format of the output image. These bits can only be
written when data transfers are disabled. Once the
transfer has started, they are read-only. others:
meaningless</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AI</name>
<description>Alpha Inverted This bit inverts the
alpha value. Once the transfer has started, this bit
is read-only.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RBS</name>
<description>Red Blue Swap This bit allows to swap
the R &amp; B to support BGR or ABGR color
formats. Once the transfer has started, this bit is
read-only.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OCOLR</name>
<displayName>OCOLR</displayName>
<description>DMA2D output color register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BLUE</name>
<description>Blue Value These bits define the blue
value of the output image. These bits can only be
written when data transfers are disabled. Once the
transfer has started, they are
read-only.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>GREEN</name>
<description>Green Value These bits define the green
value of the output image. These bits can only be
written when data transfers are disabled. Once the
transfer has started, they are
read-only.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RED</name>
<description>Red Value These bits define the red
value of the output image. These bits can only be
written when data transfers are disabled. Once the
transfer has started, they are
read-only.</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ALPHA</name>
<description>Alpha Channel Value These bits define
the alpha channel of the output color. These bits can
only be written when data transfers are disabled.
Once the transfer has started, they are
read-only.</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>OMAR</name>
<displayName>OMAR</displayName>
<description>DMA2D output memory address
register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MA</name>
<description>Memory Address Address of the data used
for the output FIFO. These bits can only be written
when data transfers are disabled. Once the transfer
has started, they are read-only. The address
alignment must match the image format selected e.g. a
32-bit per pixel format must be 32-bit aligned and a
16-bit per pixel format must be 16-bit
aligned.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OOR</name>
<displayName>OOR</displayName>
<description>DMA2D output offset register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LO</name>
<description>Line Offset Line offset used for the
output (expressed in pixels). This value is used for
the address generation. It is added at the end of
each line to determine the starting address of the
next line. These bits can only be written when data
transfers are disabled. Once the transfer has
started, they are read-only.</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>NLR</name>
<displayName>NLR</displayName>
<description>DMA2D number of line register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NL</name>
<description>Number of lines Number of lines of the
area to be transferred. These bits can only be
written when data transfers are disabled. Once the
transfer has started, they are
read-only.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>PL</name>
<description>Pixel per lines Number of pixels per
lines of the area to be transferred. These bits can
only be written when data transfers are disabled.
Once the transfer has started, they are read-only. If
any of the input image format is 4-bit per pixel,
pixel per lines must be even.</description>
<bitOffset>16</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>LWR</name>
<displayName>LWR</displayName>
<description>DMA2D line watermark register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LW</name>
<description>Line watermark These bits allow to
configure the line watermark for interrupt
generation. An interrupt is raised when the last
pixel of the watermarked line has been transferred.
These bits can only be written when data transfers
are disabled. Once the transfer has started, they are
read-only.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>AMTCR</name>
<displayName>AMTCR</displayName>
<description>DMA2D AXI master timer configuration
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>Enable Enables the dead time
functionality.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DT</name>
<description>Dead Time Dead time value in the AXI
clock cycle inserted between two consecutive accesses
on the AXI master port. These bits represent the
minimum guaranteed number of cycles between two
consecutive AXI accesses.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMAMUX1</name>
<description>DMAMUX</description>
<groupName>DMAMUX</groupName>
<baseAddress>0x40020800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMAMUX1_OV</name>
<description>DMAMUX1 overrun interrupt</description>
<value>102</value>
</interrupt>
<registers>
<register>
<name>DMAMUX_C0CR</name>
<displayName>DMAMUX_C0CR</displayName>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C1CR</name>
<displayName>DMAMUX_C1CR</displayName>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C2CR</name>
<displayName>DMAMUX_C2CR</displayName>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C3CR</name>
<displayName>DMAMUX_C3CR</displayName>
<addressOffset>0xc</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C4CR</name>
<displayName>DMAMUX_C4CR</displayName>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C5CR</name>
<displayName>DMAMUX_C5CR</displayName>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C6CR</name>
<displayName>DMAMUX_C6CR</displayName>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C7CR</name>
<displayName>DMAMUX_C7CR</displayName>
<addressOffset>0x1c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C8CR</name>
<displayName>DMAMUX_C8CR</displayName>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C9CR</name>
<displayName>DMAMUX_C9CR</displayName>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C10CR</name>
<displayName>DMAMUX_C10CR</displayName>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C11CR</name>
<displayName>DMAMUX_C11CR</displayName>
<addressOffset>0x2c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C12CR</name>
<displayName>DMAMUX_C12CR</displayName>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C13CR</name>
<displayName>DMAMUX_C13CR</displayName>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C14CR</name>
<displayName>DMAMUX_C14CR</displayName>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_C15CR</name>
<displayName>DMAMUX_C15CR</displayName>
<addressOffset>0x3c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>DMA request identification
Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOIE</name>
<description>Synchronization overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EGE</name>
<description>Event generation enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Event generation disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Event generation enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SE</name>
<description>Synchronization enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Synchronization disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Synchronization enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPOL</name>
<description>Synchronization polarity
Defines the edge polarity of the selected synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no synchronization nor detection.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests minus 1 to forward
Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated.
This field shall only be written when both SE and EGE bits are low.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization identification
Selects the synchronization input (see inputs to resources).</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_CSR</name>
<displayName>DMAMUX_CSR</displayName>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SOF0</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF1</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF2</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF3</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF4</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF5</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF6</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF7</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF8</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF9</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF10</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF11</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF12</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF13</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF14</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF15</name>
<description>Synchronization overrun event flag
The flag is set when a synchronization event occurs on a DMA request line multiplexer channel x, while the DMA request counter value is lower than NBREQ.
The flag is cleared by writing 1 to the corresponding CSOFx bit in DMAMUX_CFR register. For DMAMUX2 bits 15:8 are reserved, keep them at reset value.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_CFR</name>
<displayName>DMAMUX_CFR</displayName>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>CSOF0</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF1</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF2</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF3</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF4</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF5</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF6</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF7</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF8</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF9</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF10</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF11</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF12</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF13</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF14</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSOF15</name>
<description>Clear synchronization overrun event flag
Writing 1 in each bit clears the corresponding overrun flag SOFx in the DMAMUX_CSR register.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG0CR</name>
<displayName>DMAMUX_RG0CR</displayName>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG1CR</name>
<displayName>DMAMUX_RG1CR</displayName>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG2CR</name>
<displayName>DMAMUX_RG2CR</displayName>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG3CR</name>
<displayName>DMAMUX_RG3CR</displayName>
<addressOffset>0x10c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG4CR</name>
<displayName>DMAMUX_RG4CR</displayName>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG5CR</name>
<displayName>DMAMUX_RG5CR</displayName>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG6CR</name>
<displayName>DMAMUX_RG6CR</displayName>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RG7CR</name>
<displayName>DMAMUX_RG7CR</displayName>
<addressOffset>0x11c</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>SIG_ID</name>
<description>Signal identification
Selects the DMA request trigger input used for the channel x of the DMA request generator</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OIE</name>
<description>Trigger overrun interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>Interrupt on a trigger overrun event occurrence is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Interrupt on a trigger overrun event occurrence is enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel x enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>DMA request generator channel x disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>DMA request generator channel x enabled</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger polarity
Defines the edge polarity of the selected trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>B_0x0</name>
<description>No event, i.e. no trigger detection nor generation.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x1</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x2</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>B_0x3</name>
<description>Rising and falling edges</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to be generated (minus 1)
Defines the number of DMA requests to be generated after a trigger event. The actual number of generated DMA requests is GNBREQ +1.
Note: This field must be written only when GE bit is disabled.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RGSR</name>
<displayName>DMAMUX_RGSR</displayName>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>OF0</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF1</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF2</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF3</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF4</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF5</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF6</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OF7</name>
<description>[:0]: Trigger overrun event flag
The flag is set when a new trigger event occurs on DMA request generator channel x, before the request counter underrun (the internal request counter programmed via the GNBREQ field of the DMAMUX_RGxCR register).
The flag is cleared by writing 1 to the corresponding COFx bit in the DMAMUX_RGCFR register.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAMUX_RGCFR</name>
<displayName>DMAMUX_RGCFR</displayName>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>COF0</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF1</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF2</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF3</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF4</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF5</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF6</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COF7</name>
<description>Clear trigger overrun event flag
Writing 1 in each bit clears the corresponding overrun flag OFx in the DMAMUX_RGSR register.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMAMUX2</name>
<description>DMAMUX</description>
<groupName>DMAMUX</groupName>
<baseAddress>0x58025800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMAMUX2_OVR</name>
<description>DMAMUX2 overrun interrupt</description>
<value>128</value>
</interrupt>
<registers>
<register>
<name>C0CR</name>
<displayName>C0CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1CR</name>
<displayName>C1CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C2CR</name>
<displayName>C2CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C3CR</name>
<displayName>C3CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C4CR</name>
<displayName>C4CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C5CR</name>
<displayName>C5CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C6CR</name>
<displayName>C6CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>C7CR</name>
<displayName>C7CR</displayName>
<description>DMAMux - DMA request line multiplexer
channel x control register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAREQ_ID</name>
<description>Input DMA request line
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOIE</name>
<description>Interrupt enable at synchronization
event overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EGE</name>
<description>Event generation
enable/disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE</name>
<description>Synchronous operating mode
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPOL</name>
<description>Synchronization event type selector
Defines the synchronization event on the selected
synchronization input:</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBREQ</name>
<description>Number of DMA requests to forward
Defines the number of DMA requests forwarded before
output event is generated. In synchronous mode, it
also defines the number of DMA requests to forward
after a synchronization event, then stop forwarding.
The actual number of DMA requests forwarded is
NBREQ+1. Note: This field can only be written when
both SE and EGE bits are reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SYNC_ID</name>
<description>Synchronization input
selected</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG0CR</name>
<displayName>RG0CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG1CR</name>
<displayName>RG1CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG2CR</name>
<displayName>RG2CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG3CR</name>
<displayName>RG3CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG4CR</name>
<displayName>RG4CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG5CR</name>
<displayName>RG5CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG6CR</name>
<displayName>RG6CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RG7CR</name>
<displayName>RG7CR</displayName>
<description>DMAMux - DMA request generator channel x
control register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIG_ID</name>
<description>DMA request trigger input
selected</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OIE</name>
<description>Interrupt enable at trigger event
overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GE</name>
<description>DMA request generator channel
enable/disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPOL</name>
<description>DMA request generator trigger event type
selection Defines the trigger event on the selected
DMA request trigger input</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GNBREQ</name>
<description>Number of DMA requests to generate
Defines the number of DMA requests generated after a
trigger event, then stop generating. The actual
number of generated DMA requests is GNBREQ+1. Note:
This field can only be written when GE bit is
reset.</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>RGSR</name>
<displayName>RGSR</displayName>
<description>DMAMux - DMA request generator status
register</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OF</name>
<description>Trigger event overrun flag The flag is
set when a trigger event occurs on DMA request
generator channel x, while the DMA request generator
counter value is lower than GNBREQ. The flag is
cleared by writing 1 to the corresponding COFx bit in
DMAMUX_RGCFR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RGCFR</name>
<displayName>RGCFR</displayName>
<description>DMAMux - DMA request generator clear flag
register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COF</name>
<description>Clear trigger event overrun flag Upon
setting, this bit clears the corresponding overrun
flag OFx in the DMAMUX_RGCSR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<displayName>CSR</displayName>
<description>DMAMUX request line multiplexer interrupt
channel status register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SOF</name>
<description>Synchronization overrun event
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFR</name>
<displayName>CFR</displayName>
<description>DMAMUX request line multiplexer interrupt
clear flag register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSOF</name>
<description>Clear synchronization overrun event
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>FMC</name>
<description>FMC</description>
<groupName>FMC</groupName>
<baseAddress>0x52004000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>FMC</name>
<description>FMC global interrupt</description>
<value>48</value>
</interrupt>
<registers>
<register>
<name>BCR1</name>
<displayName>BCR1</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x000030DB</resetValue>
<fields>
<field>
<name>MBKEN</name>
<description>Memory bank enable bit This bit enables
the memory bank. After reset Bank1 is enabled, all
others are disabled. Accessing a disabled bank causes
an ERROR on AXI bus.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXEN</name>
<description>Address/data multiplexing enable bit
When this bit is set, the address and data values are
multiplexed on the data bus, valid only with NOR and
PSRAM memories:</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTYP</name>
<description>Memory type These bits define the type
of external memory attached to the corresponding
memory bank:</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MWID</name>
<description>Memory data bus width Defines the
external memory device width, valid for all type of
memories.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FACCEN</name>
<description>Flash access enable This bit enables NOR
Flash memory access operations.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BURSTEN</name>
<description>Burst enable bit This bit
enables/disables synchronous accesses during read
operations. It is valid only for synchronous memories
operating in Burst mode:</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITPOL</name>
<description>Wait signal polarity bit This bit
defines the polarity of the wait signal from memory
used for either in synchronous or asynchronous
mode:</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITCFG</name>
<description>Wait timing configuration The NWAIT
signal indicates whether the data from the memory are
valid or if a wait state must be inserted when
accessing the memory in synchronous mode. This
configuration bit determines if NWAIT is asserted by
the memory one clock cycle before the wait state or
during the wait state:</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WREN</name>
<description>Write enable bit This bit indicates
whether write operations are enabled/disabled in the
bank by the FMC:</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITEN</name>
<description>Wait enable bit This bit
enables/disables wait-state insertion via the NWAIT
signal when accessing the memory in synchronous
mode.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTMOD</name>
<description>Extended mode enable. This bit enables
the FMC to program the write timings for asynchronous
accesses inside the FMC_BWTR register, thus resulting
in different timings for read and write operations.
Note: When the extended mode is disabled, the FMC can
operate in Mode1 or Mode2 as follows: ** Mode 1 is
the default mode when the SRAM/PSRAM memory type is
selected (MTYP =0x0 or 0x01) ** Mode 2 is the default
mode when the NOR memory type is selected (MTYP =
0x10).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASYNCWAIT</name>
<description>Wait signal during asynchronous
transfers This bit enables/disables the FMC to use
the wait signal even during an asynchronous
protocol.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPSIZE</name>
<description>CRAM Page Size These are used for
Cellular RAM 1.5 which does not allow burst access to
cross the address boundaries between pages. When
these bits are configured, the FMC controller splits
automatically the burst access when the memory page
size is reached (refer to memory datasheet for page
size). Other configuration: reserved.</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CBURSTRW</name>
<description>Write burst enable For PSRAM (CRAM)
operating in Burst mode, the bit enables synchronous
accesses during write operations. The enable bit for
synchronous read accesses is the BURSTEN bit in the
FMC_BCRx register.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCLKEN</name>
<description>Continuous Clock Enable This bit enables
the FMC_CLK clock output to external memory devices.
Note: The CCLKEN bit of the FMC_BCR2..4 registers is
dont care. It is only enabled through the FMC_BCR1
register. Bank 1 must be configured in synchronous
mode to generate the FMC_CLK continuous clock. If
CCLKEN bit is set, the FMC_CLK clock ratio is
specified by CLKDIV value in the FMC_BTR1 register.
CLKDIV in FMC_BWTR1 is dont care. If the synchronous
mode is used and CCLKEN bit is set, the synchronous
memories connected to other banks than Bank 1 are
clocked by the same clock (the CLKDIV value in the
FMC_BTR2..4 and FMC_BWTR2..4 registers for other
banks has no effect.)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WFDIS</name>
<description>Write FIFO Disable This bit disables the
Write FIFO used by the FMC controller. Note: The
WFDIS bit of the FMC_BCR2..4 registers is dont care.
It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BMAP</name>
<description>FMC bank mapping These bits allows
different to remap SDRAM bank2 or swap the FMC
NOR/PSRAM and SDRAM banks.Refer to Table 10 for Note:
The BMAP bits of the FMC_BCR2..4 registers are dont
care. It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FMCEN</name>
<description>FMC controller Enable This bit
enables/disables the FMC controller. Note: The FMCEN
bit of the FMC_BCR2..4 registers is dont care. It is
only enabled through the FMC_BCR1
register.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BTR1</name>
<displayName>BTR1</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.If the EXTMOD bit is set in the
FMC_BCRx register, then this register is partitioned for
write and read access, that is, 2 registers are
available: one to configure read accesses (this register)
and one to configure write accesses (FMC_BWTRx
registers).</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration These bits
are written by software to define the duration of the
address setup phase (refer to Figure81 to Figure93),
used in SRAMs, ROMs and asynchronous NOR Flash: For
each access mode address setup phase duration, please
refer to the respective figure (refer to Figure81 to
Figure93). Note: In synchronous accesses, this value
is dont care. In Muxed mode or Mode D, the minimum
value for ADDSET is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in mode D or multiplexed accesses: For each
access mode address-hold phase duration, please refer
to the respective figure (Figure81 to Figure93).
Note: In synchronous accesses, this value is not
used, the address hold phase is always 1 memory clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous accesses: For each memory type and
access mode data-phase duration, please refer to the
respective figure (Figure81 to Figure93). Example:
Mode1, write access, DATAST=1: Data-phase duration=
DATAST+1 = 2 KCK_FMC clock cycles. Note: In
synchronous accesses, this value is dont
care.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write-to-read or read-to write transaction. The
programmed bus turnaround delay is inserted between
an asynchronous read (in muxed or mode D) or write
transaction and any other asynchronous /synchronous
read/write from/to a static bank. If a read operation
is performed, the bank can be the same or a different
one, whereas it must be different in case of write
operation to the bank, except in muxed mode or mode
D. In some cases, whatever the programmed BUSTRUN
values, the bus turnaround delay is fixed as follows:
The bus turnaround delay is not inserted between two
consecutive asynchronous write transfers to the same
static memory bank except in muxed mode and mode D.
There is a bus turnaround delay of 1 FMC clock cycle
between: Two consecutive asynchronous read transfers
to the same static memory bank except for modes muxed
and D. An asynchronous read to an asynchronous or
synchronous write to any static bank or dynamic bank
except in modes muxed and D mode. There is a bus
turnaround delay of 2 FMC clock cycle between: Two
consecutive synchronous write operations (in Burst or
Single mode) to the same bank. A synchronous write
(burst or single) access and an asynchronous write or
read transfer to or from static memory bank (the bank
can be the same or a different one in case of a read
operation. Two consecutive synchronous read
operations (in Burst or Single mode) followed by any
synchronous/asynchronous read or write from/to
another static memory bank. There is a bus turnaround
delay of 3 FMC clock cycle between: Two consecutive
synchronous write operations (in Burst or Single
mode) to different static banks. A synchronous write
access (in Burst or Single mode) and a synchronous
read from the same or a different bank. The bus
turnaround delay allows to match the minimum time
between consecutive transactions (tEHEL from NEx high
to NEx low) and the maximum time required by the
memory to free the data bus after a read access
(tEHQZ): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin and (BUSTRUN + 2)KCK_FMC period &#8805;
tEHQZmax if EXTMOD = 0 (BUSTRUN + 2)KCK_FMC period
&#8805; max (tEHELmin, tEHQZmax) if EXTMOD = 126.
...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CLKDIV</name>
<description>Clock divide ratio (for FMC_CLK signal)
These bits define the period of FMC_CLK clock output
signal, expressed in number of KCK_FMC cycles: In
asynchronous NOR Flash, SRAM or PSRAM accesses, this
value is dont care. Note: Refer to Section20.6.5:
Synchronous transactions for FMC_CLK divider ratio
formula)</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATLAT</name>
<description>Data latency for synchronous memory For
synchronous access with read write burst mode enabled
these bits define the number of memory clock
cycles</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode These bits specify the
asynchronous access modes as shown in the timing
diagrams. They are taken into account only when the
EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BCR2</name>
<displayName>BCR2</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x000030D2</resetValue>
<fields>
<field>
<name>MBKEN</name>
<description>Memory bank enable bit This bit enables
the memory bank. After reset Bank1 is enabled, all
others are disabled. Accessing a disabled bank causes
an ERROR on AXI bus.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXEN</name>
<description>Address/data multiplexing enable bit
When this bit is set, the address and data values are
multiplexed on the data bus, valid only with NOR and
PSRAM memories:</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTYP</name>
<description>Memory type These bits define the type
of external memory attached to the corresponding
memory bank:</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MWID</name>
<description>Memory data bus width Defines the
external memory device width, valid for all type of
memories.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FACCEN</name>
<description>Flash access enable This bit enables NOR
Flash memory access operations.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BURSTEN</name>
<description>Burst enable bit This bit
enables/disables synchronous accesses during read
operations. It is valid only for synchronous memories
operating in Burst mode:</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITPOL</name>
<description>Wait signal polarity bit This bit
defines the polarity of the wait signal from memory
used for either in synchronous or asynchronous
mode:</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITCFG</name>
<description>Wait timing configuration The NWAIT
signal indicates whether the data from the memory are
valid or if a wait state must be inserted when
accessing the memory in synchronous mode. This
configuration bit determines if NWAIT is asserted by
the memory one clock cycle before the wait state or
during the wait state:</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WREN</name>
<description>Write enable bit This bit indicates
whether write operations are enabled/disabled in the
bank by the FMC:</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITEN</name>
<description>Wait enable bit This bit
enables/disables wait-state insertion via the NWAIT
signal when accessing the memory in synchronous
mode.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTMOD</name>
<description>Extended mode enable. This bit enables
the FMC to program the write timings for asynchronous
accesses inside the FMC_BWTR register, thus resulting
in different timings for read and write operations.
Note: When the extended mode is disabled, the FMC can
operate in Mode1 or Mode2 as follows: ** Mode 1 is
the default mode when the SRAM/PSRAM memory type is
selected (MTYP =0x0 or 0x01) ** Mode 2 is the default
mode when the NOR memory type is selected (MTYP =
0x10).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASYNCWAIT</name>
<description>Wait signal during asynchronous
transfers This bit enables/disables the FMC to use
the wait signal even during an asynchronous
protocol.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPSIZE</name>
<description>CRAM Page Size These are used for
Cellular RAM 1.5 which does not allow burst access to
cross the address boundaries between pages. When
these bits are configured, the FMC controller splits
automatically the burst access when the memory page
size is reached (refer to memory datasheet for page
size). Other configuration: reserved.</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CBURSTRW</name>
<description>Write burst enable For PSRAM (CRAM)
operating in Burst mode, the bit enables synchronous
accesses during write operations. The enable bit for
synchronous read accesses is the BURSTEN bit in the
FMC_BCRx register.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCLKEN</name>
<description>Continuous Clock Enable This bit enables
the FMC_CLK clock output to external memory devices.
Note: The CCLKEN bit of the FMC_BCR2..4 registers is
dont care. It is only enabled through the FMC_BCR1
register. Bank 1 must be configured in synchronous
mode to generate the FMC_CLK continuous clock. If
CCLKEN bit is set, the FMC_CLK clock ratio is
specified by CLKDIV value in the FMC_BTR1 register.
CLKDIV in FMC_BWTR1 is dont care. If the synchronous
mode is used and CCLKEN bit is set, the synchronous
memories connected to other banks than Bank 1 are
clocked by the same clock (the CLKDIV value in the
FMC_BTR2..4 and FMC_BWTR2..4 registers for other
banks has no effect.)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WFDIS</name>
<description>Write FIFO Disable This bit disables the
Write FIFO used by the FMC controller. Note: The
WFDIS bit of the FMC_BCR2..4 registers is dont care.
It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BMAP</name>
<description>FMC bank mapping These bits allows
different to remap SDRAM bank2 or swap the FMC
NOR/PSRAM and SDRAM banks.Refer to Table 10 for Note:
The BMAP bits of the FMC_BCR2..4 registers are dont
care. It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FMCEN</name>
<description>FMC controller Enable This bit
enables/disables the FMC controller. Note: The FMCEN
bit of the FMC_BCR2..4 registers is dont care. It is
only enabled through the FMC_BCR1
register.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BTR2</name>
<displayName>BTR2</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.If the EXTMOD bit is set in the
FMC_BCRx register, then this register is partitioned for
write and read access, that is, 2 registers are
available: one to configure read accesses (this register)
and one to configure write accesses (FMC_BWTRx
registers).</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration These bits
are written by software to define the duration of the
address setup phase (refer to Figure81 to Figure93),
used in SRAMs, ROMs and asynchronous NOR Flash: For
each access mode address setup phase duration, please
refer to the respective figure (refer to Figure81 to
Figure93). Note: In synchronous accesses, this value
is dont care. In Muxed mode or Mode D, the minimum
value for ADDSET is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in mode D or multiplexed accesses: For each
access mode address-hold phase duration, please refer
to the respective figure (Figure81 to Figure93).
Note: In synchronous accesses, this value is not
used, the address hold phase is always 1 memory clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous accesses: For each memory type and
access mode data-phase duration, please refer to the
respective figure (Figure81 to Figure93). Example:
Mode1, write access, DATAST=1: Data-phase duration=
DATAST+1 = 2 KCK_FMC clock cycles. Note: In
synchronous accesses, this value is dont
care.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write-to-read or read-to write transaction. The
programmed bus turnaround delay is inserted between
an asynchronous read (in muxed or mode D) or write
transaction and any other asynchronous /synchronous
read/write from/to a static bank. If a read operation
is performed, the bank can be the same or a different
one, whereas it must be different in case of write
operation to the bank, except in muxed mode or mode
D. In some cases, whatever the programmed BUSTRUN
values, the bus turnaround delay is fixed as follows:
The bus turnaround delay is not inserted between two
consecutive asynchronous write transfers to the same
static memory bank except in muxed mode and mode D.
There is a bus turnaround delay of 1 FMC clock cycle
between: Two consecutive asynchronous read transfers
to the same static memory bank except for modes muxed
and D. An asynchronous read to an asynchronous or
synchronous write to any static bank or dynamic bank
except in modes muxed and D mode. There is a bus
turnaround delay of 2 FMC clock cycle between: Two
consecutive synchronous write operations (in Burst or
Single mode) to the same bank. A synchronous write
(burst or single) access and an asynchronous write or
read transfer to or from static memory bank (the bank
can be the same or a different one in case of a read
operation. Two consecutive synchronous read
operations (in Burst or Single mode) followed by any
synchronous/asynchronous read or write from/to
another static memory bank. There is a bus turnaround
delay of 3 FMC clock cycle between: Two consecutive
synchronous write operations (in Burst or Single
mode) to different static banks. A synchronous write
access (in Burst or Single mode) and a synchronous
read from the same or a different bank. The bus
turnaround delay allows to match the minimum time
between consecutive transactions (tEHEL from NEx high
to NEx low) and the maximum time required by the
memory to free the data bus after a read access
(tEHQZ): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin and (BUSTRUN + 2)KCK_FMC period &#8805;
tEHQZmax if EXTMOD = 0 (BUSTRUN + 2)KCK_FMC period
&#8805; max (tEHELmin, tEHQZmax) if EXTMOD = 1.
...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CLKDIV</name>
<description>Clock divide ratio (for FMC_CLK signal)
These bits define the period of FMC_CLK clock output
signal, expressed in number of KCK_FMC cycles: In
asynchronous NOR Flash, SRAM or PSRAM accesses, this
value is dont care. Note: Refer to Section20.6.5:
Synchronous transactions for FMC_CLK divider ratio
formula)</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATLAT</name>
<description>Data latency for synchronous memory For
synchronous access with read write burst mode enabled
these bits define the number of memory clock
cycles</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode These bits specify the
asynchronous access modes as shown in the timing
diagrams. They are taken into account only when the
EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BCR3</name>
<displayName>BCR3</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x000030D2</resetValue>
<fields>
<field>
<name>MBKEN</name>
<description>Memory bank enable bit This bit enables
the memory bank. After reset Bank1 is enabled, all
others are disabled. Accessing a disabled bank causes
an ERROR on AXI bus.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXEN</name>
<description>Address/data multiplexing enable bit
When this bit is set, the address and data values are
multiplexed on the data bus, valid only with NOR and
PSRAM memories:</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTYP</name>
<description>Memory type These bits define the type
of external memory attached to the corresponding
memory bank:</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MWID</name>
<description>Memory data bus width Defines the
external memory device width, valid for all type of
memories.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FACCEN</name>
<description>Flash access enable This bit enables NOR
Flash memory access operations.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BURSTEN</name>
<description>Burst enable bit This bit
enables/disables synchronous accesses during read
operations. It is valid only for synchronous memories
operating in Burst mode:</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITPOL</name>
<description>Wait signal polarity bit This bit
defines the polarity of the wait signal from memory
used for either in synchronous or asynchronous
mode:</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITCFG</name>
<description>Wait timing configuration The NWAIT
signal indicates whether the data from the memory are
valid or if a wait state must be inserted when
accessing the memory in synchronous mode. This
configuration bit determines if NWAIT is asserted by
the memory one clock cycle before the wait state or
during the wait state:</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WREN</name>
<description>Write enable bit This bit indicates
whether write operations are enabled/disabled in the
bank by the FMC:</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITEN</name>
<description>Wait enable bit This bit
enables/disables wait-state insertion via the NWAIT
signal when accessing the memory in synchronous
mode.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTMOD</name>
<description>Extended mode enable. This bit enables
the FMC to program the write timings for asynchronous
accesses inside the FMC_BWTR register, thus resulting
in different timings for read and write operations.
Note: When the extended mode is disabled, the FMC can
operate in Mode1 or Mode2 as follows: ** Mode 1 is
the default mode when the SRAM/PSRAM memory type is
selected (MTYP =0x0 or 0x01) ** Mode 2 is the default
mode when the NOR memory type is selected (MTYP =
0x10).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASYNCWAIT</name>
<description>Wait signal during asynchronous
transfers This bit enables/disables the FMC to use
the wait signal even during an asynchronous
protocol.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPSIZE</name>
<description>CRAM Page Size These are used for
Cellular RAM 1.5 which does not allow burst access to
cross the address boundaries between pages. When
these bits are configured, the FMC controller splits
automatically the burst access when the memory page
size is reached (refer to memory datasheet for page
size). Other configuration: reserved.</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CBURSTRW</name>
<description>Write burst enable For PSRAM (CRAM)
operating in Burst mode, the bit enables synchronous
accesses during write operations. The enable bit for
synchronous read accesses is the BURSTEN bit in the
FMC_BCRx register.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCLKEN</name>
<description>Continuous Clock Enable This bit enables
the FMC_CLK clock output to external memory devices.
Note: The CCLKEN bit of the FMC_BCR2..4 registers is
dont care. It is only enabled through the FMC_BCR1
register. Bank 1 must be configured in synchronous
mode to generate the FMC_CLK continuous clock. If
CCLKEN bit is set, the FMC_CLK clock ratio is
specified by CLKDIV value in the FMC_BTR1 register.
CLKDIV in FMC_BWTR1 is dont care. If the synchronous
mode is used and CCLKEN bit is set, the synchronous
memories connected to other banks than Bank 1 are
clocked by the same clock (the CLKDIV value in the
FMC_BTR2..4 and FMC_BWTR2..4 registers for other
banks has no effect.)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WFDIS</name>
<description>Write FIFO Disable This bit disables the
Write FIFO used by the FMC controller. Note: The
WFDIS bit of the FMC_BCR2..4 registers is dont care.
It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BMAP</name>
<description>FMC bank mapping These bits allows
different to remap SDRAM bank2 or swap the FMC
NOR/PSRAM and SDRAM banks.Refer to Table 10 for Note:
The BMAP bits of the FMC_BCR2..4 registers are dont
care. It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FMCEN</name>
<description>FMC controller Enable This bit
enables/disables the FMC controller. Note: The FMCEN
bit of the FMC_BCR2..4 registers is dont care. It is
only enabled through the FMC_BCR1
register.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BTR3</name>
<displayName>BTR3</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.If the EXTMOD bit is set in the
FMC_BCRx register, then this register is partitioned for
write and read access, that is, 2 registers are
available: one to configure read accesses (this register)
and one to configure write accesses (FMC_BWTRx
registers).</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration These bits
are written by software to define the duration of the
address setup phase (refer to Figure81 to Figure93),
used in SRAMs, ROMs and asynchronous NOR Flash: For
each access mode address setup phase duration, please
refer to the respective figure (refer to Figure81 to
Figure93). Note: In synchronous accesses, this value
is dont care. In Muxed mode or Mode D, the minimum
value for ADDSET is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in mode D or multiplexed accesses: For each
access mode address-hold phase duration, please refer
to the respective figure (Figure81 to Figure93).
Note: In synchronous accesses, this value is not
used, the address hold phase is always 1 memory clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous accesses: For each memory type and
access mode data-phase duration, please refer to the
respective figure (Figure81 to Figure93). Example:
Mode1, write access, DATAST=1: Data-phase duration=
DATAST+1 = 2 KCK_FMC clock cycles. Note: In
synchronous accesses, this value is dont
care.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write-to-read or read-to write transaction. The
programmed bus turnaround delay is inserted between
an asynchronous read (in muxed or mode D) or write
transaction and any other asynchronous /synchronous
read/write from/to a static bank. If a read operation
is performed, the bank can be the same or a different
one, whereas it must be different in case of write
operation to the bank, except in muxed mode or mode
D. In some cases, whatever the programmed BUSTRUN
values, the bus turnaround delay is fixed as follows:
The bus turnaround delay is not inserted between two
consecutive asynchronous write transfers to the same
static memory bank except in muxed mode and mode D.
There is a bus turnaround delay of 1 FMC clock cycle
between: Two consecutive asynchronous read transfers
to the same static memory bank except for modes muxed
and D. An asynchronous read to an asynchronous or
synchronous write to any static bank or dynamic bank
except in modes muxed and D mode. There is a bus
turnaround delay of 2 FMC clock cycle between: Two
consecutive synchronous write operations (in Burst or
Single mode) to the same bank. A synchronous write
(burst or single) access and an asynchronous write or
read transfer to or from static memory bank (the bank
can be the same or a different one in case of a read
operation. Two consecutive synchronous read
operations (in Burst or Single mode) followed by any
synchronous/asynchronous read or write from/to
another static memory bank. There is a bus turnaround
delay of 3 FMC clock cycle between: Two consecutive
synchronous write operations (in Burst or Single
mode) to different static banks. A synchronous write
access (in Burst or Single mode) and a synchronous
read from the same or a different bank. The bus
turnaround delay allows to match the minimum time
between consecutive transactions (tEHEL from NEx high
to NEx low) and the maximum time required by the
memory to free the data bus after a read access
(tEHQZ): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin and (BUSTRUN + 2)KCK_FMC period &#8805;
tEHQZmax if EXTMOD = 0 (BUSTRUN + 2)KCK_FMC period
&#8805; max (tEHELmin, tEHQZmax) if EXTMOD =1.
...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CLKDIV</name>
<description>Clock divide ratio (for FMC_CLK signal)
These bits define the period of FMC_CLK clock output
signal, expressed in number of KCK_FMC cycles: In
asynchronous NOR Flash, SRAM or PSRAM accesses, this
value is dont care. Note: Refer to Section20.6.5:
Synchronous transactions for FMC_CLK divider ratio
formula)</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATLAT</name>
<description>Data latency for synchronous memory For
synchronous access with read write burst mode enabled
these bits define the number of memory clock
cycles</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode These bits specify the
asynchronous access modes as shown in the timing
diagrams. They are taken into account only when the
EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BCR4</name>
<displayName>BCR4</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x000030D2</resetValue>
<fields>
<field>
<name>MBKEN</name>
<description>Memory bank enable bit This bit enables
the memory bank. After reset Bank1 is enabled, all
others are disabled. Accessing a disabled bank causes
an ERROR on AXI bus.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXEN</name>
<description>Address/data multiplexing enable bit
When this bit is set, the address and data values are
multiplexed on the data bus, valid only with NOR and
PSRAM memories:</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTYP</name>
<description>Memory type These bits define the type
of external memory attached to the corresponding
memory bank:</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MWID</name>
<description>Memory data bus width Defines the
external memory device width, valid for all type of
memories.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FACCEN</name>
<description>Flash access enable This bit enables NOR
Flash memory access operations.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BURSTEN</name>
<description>Burst enable bit This bit
enables/disables synchronous accesses during read
operations. It is valid only for synchronous memories
operating in Burst mode:</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITPOL</name>
<description>Wait signal polarity bit This bit
defines the polarity of the wait signal from memory
used for either in synchronous or asynchronous
mode:</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITCFG</name>
<description>Wait timing configuration The NWAIT
signal indicates whether the data from the memory are
valid or if a wait state must be inserted when
accessing the memory in synchronous mode. This
configuration bit determines if NWAIT is asserted by
the memory one clock cycle before the wait state or
during the wait state:</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WREN</name>
<description>Write enable bit This bit indicates
whether write operations are enabled/disabled in the
bank by the FMC:</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITEN</name>
<description>Wait enable bit This bit
enables/disables wait-state insertion via the NWAIT
signal when accessing the memory in synchronous
mode.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTMOD</name>
<description>Extended mode enable. This bit enables
the FMC to program the write timings for asynchronous
accesses inside the FMC_BWTR register, thus resulting
in different timings for read and write operations.
Note: When the extended mode is disabled, the FMC can
operate in Mode1 or Mode2 as follows: ** Mode 1 is
the default mode when the SRAM/PSRAM memory type is
selected (MTYP =0x0 or 0x01) ** Mode 2 is the default
mode when the NOR memory type is selected (MTYP =
0x10).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASYNCWAIT</name>
<description>Wait signal during asynchronous
transfers This bit enables/disables the FMC to use
the wait signal even during an asynchronous
protocol.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPSIZE</name>
<description>CRAM Page Size These are used for
Cellular RAM 1.5 which does not allow burst access to
cross the address boundaries between pages. When
these bits are configured, the FMC controller splits
automatically the burst access when the memory page
size is reached (refer to memory datasheet for page
size). Other configuration: reserved.</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CBURSTRW</name>
<description>Write burst enable For PSRAM (CRAM)
operating in Burst mode, the bit enables synchronous
accesses during write operations. The enable bit for
synchronous read accesses is the BURSTEN bit in the
FMC_BCRx register.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCLKEN</name>
<description>Continuous Clock Enable This bit enables
the FMC_CLK clock output to external memory devices.
Note: The CCLKEN bit of the FMC_BCR2..4 registers is
dont care. It is only enabled through the FMC_BCR1
register. Bank 1 must be configured in synchronous
mode to generate the FMC_CLK continuous clock. If
CCLKEN bit is set, the FMC_CLK clock ratio is
specified by CLKDIV value in the FMC_BTR1 register.
CLKDIV in FMC_BWTR1 is dont care. If the synchronous
mode is used and CCLKEN bit is set, the synchronous
memories connected to other banks than Bank 1 are
clocked by the same clock (the CLKDIV value in the
FMC_BTR2..4 and FMC_BWTR2..4 registers for other
banks has no effect.)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WFDIS</name>
<description>Write FIFO Disable This bit disables the
Write FIFO used by the FMC controller. Note: The
WFDIS bit of the FMC_BCR2..4 registers is dont care.
It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BMAP</name>
<description>FMC bank mapping These bits allows
different to remap SDRAM bank2 or swap the FMC
NOR/PSRAM and SDRAM banks.Refer to Table 10 for Note:
The BMAP bits of the FMC_BCR2..4 registers are dont
care. It is only enabled through the FMC_BCR1
register.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FMCEN</name>
<description>FMC controller Enable This bit
enables/disables the FMC controller. Note: The FMCEN
bit of the FMC_BCR2..4 registers is dont care. It is
only enabled through the FMC_BCR1
register.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BTR4</name>
<displayName>BTR4</displayName>
<description>This register contains the control
information of each memory bank, used for SRAMs, PSRAM
and NOR Flash memories.If the EXTMOD bit is set in the
FMC_BCRx register, then this register is partitioned for
write and read access, that is, 2 registers are
available: one to configure read accesses (this register)
and one to configure write accesses (FMC_BWTRx
registers).</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration These bits
are written by software to define the duration of the
address setup phase (refer to Figure81 to Figure93),
used in SRAMs, ROMs and asynchronous NOR Flash: For
each access mode address setup phase duration, please
refer to the respective figure (refer to Figure81 to
Figure93). Note: In synchronous accesses, this value
is dont care. In Muxed mode or Mode D, the minimum
value for ADDSET is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in mode D or multiplexed accesses: For each
access mode address-hold phase duration, please refer
to the respective figure (Figure81 to Figure93).
Note: In synchronous accesses, this value is not
used, the address hold phase is always 1 memory clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous accesses: For each memory type and
access mode data-phase duration, please refer to the
respective figure (Figure81 to Figure93). Example:
Mode1, write access, DATAST=1: Data-phase duration=
DATAST+1 = 2 KCK_FMC clock cycles. Note: In
synchronous accesses, this value is dont
care.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write-to-read or read-to write transaction. The
programmed bus turnaround delay is inserted between
an asynchronous read (in muxed or mode D) or write
transaction and any other asynchronous /synchronous
read/write from/to a static bank. If a read operation
is performed, the bank can be the same or a different
one, whereas it must be different in case of write
operation to the bank, except in muxed mode or mode
D. In some cases, whatever the programmed BUSTRUN
values, the bus turnaround delay is fixed as follows:
The bus turnaround delay is not inserted between two
consecutive asynchronous write transfers to the same
static memory bank except in muxed mode and mode D.
There is a bus turnaround delay of 1 FMC clock cycle
between: Two consecutive asynchronous read transfers
to the same static memory bank except for modes muxed
and D. An asynchronous read to an asynchronous or
synchronous write to any static bank or dynamic bank
except in modes muxed and D mode. There is a bus
turnaround delay of 2 FMC clock cycle between: Two
consecutive synchronous write operations (in Burst or
Single mode) to the same bank. A synchronous write
(burst or single) access and an asynchronous write or
read transfer to or from static memory bank (the bank
can be the same or a different one in case of a read
operation. Two consecutive synchronous read
operations (in Burst or Single mode) followed by any
synchronous/asynchronous read or write from/to
another static memory bank. There is a bus turnaround
delay of 3 FMC clock cycle between: Two consecutive
synchronous write operations (in Burst or Single
mode) to different static banks. A synchronous write
access (in Burst or Single mode) and a synchronous
read from the same or a different bank. The bus
turnaround delay allows to match the minimum time
between consecutive transactions (tEHEL from NEx high
to NEx low) and the maximum time required by the
memory to free the data bus after a read access
(tEHQZ): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin and (BUSTRUN + 2)KCK_FMC period &#8805;
tEHQZmax if EXTMOD = 0 (BUSTRUN + 2)KCK_FMC period
&#8805; max (tEHELmin, tEHQZmax) if EXTMOD =1.
...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CLKDIV</name>
<description>Clock divide ratio (for FMC_CLK signal)
These bits define the period of FMC_CLK clock output
signal, expressed in number of KCK_FMC cycles: In
asynchronous NOR Flash, SRAM or PSRAM accesses, this
value is dont care. Note: Refer to Section20.6.5:
Synchronous transactions for FMC_CLK divider ratio
formula)</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATLAT</name>
<description>Data latency for synchronous memory For
synchronous access with read write burst mode enabled
these bits define the number of memory clock
cycles</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode These bits specify the
asynchronous access modes as shown in the timing
diagrams. They are taken into account only when the
EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>PCR</name>
<displayName>PCR</displayName>
<description>NAND Flash control registers</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000018</resetValue>
<fields>
<field>
<name>PWAITEN</name>
<description>Wait feature enable bit. This bit
enables the Wait feature for the NAND Flash memory
bank:</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PBKEN</name>
<description>NAND Flash memory bank enable bit. This
bit enables the memory bank. Accessing a disabled
memory bank causes an ERROR on AXI bus</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PWID</name>
<description>Data bus width. These bits define the
external memory device width.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ECCEN</name>
<description>ECC computation logic enable
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCLR</name>
<description>CLE to RE delay. These bits set time
from CLE low to RE low in number of KCK_FMC clock
cycles. The time is give by the following formula:
t_clr = (TCLR + SET + 2) TKCK_FMC where TKCK_FMC is
the KCK_FMC clock period Note: Set is MEMSET or
ATTSET according to the addressed
space.</description>
<bitOffset>9</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TAR</name>
<description>ALE to RE delay. These bits set time
from ALE low to RE low in number of KCK_FMC clock
cycles. Time is: t_ar = (TAR + SET + 2) TKCK_FMC
where TKCK_FMC is the FMC clock period Note: Set is
MEMSET or ATTSET according to the addressed
space.</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ECCPS</name>
<description>ECC page size. These bits define the
page size for the extended ECC:</description>
<bitOffset>17</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>This register contains information about the
FIFO status and interrupt. The FMC features a FIFO that
is used when writing to memories to transfer up to 16
words of data.This is used to quickly write to the FIFO
and free the AXI bus for transactions to peripherals
other than the FMC, while the FMC is draining its FIFO
into the memory. One of these register bits indicates the
status of the FIFO, for ECC purposes.The ECC is
calculated while the data are written to the memory. To
read the correct ECC, the software must consequently wait
until the FIFO is empty.</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>IRS</name>
<description>Interrupt rising edge status The flag is
set by hardware and reset by software. Note: If this
bit is written by software to 1 it will be
set.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ILS</name>
<description>Interrupt high-level status The flag is
set by hardware and reset by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IFS</name>
<description>Interrupt falling edge status The flag
is set by hardware and reset by software. Note: If
this bit is written by software to 1 it will be
set.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREN</name>
<description>Interrupt rising edge detection enable
bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ILEN</name>
<description>Interrupt high-level detection enable
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IFEN</name>
<description>Interrupt falling edge detection enable
bit</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FEMPT</name>
<description>FIFO empty. Read-only bit that provides
the status of the FIFO</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMEM</name>
<displayName>PMEM</displayName>
<description>The FMC_PMEM read/write register contains
the timing information for NAND Flash memory bank. This
information is used to access either the common memory
space of the NAND Flash for command, address write access
and data read/write access.</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFCFCFCFC</resetValue>
<fields>
<field>
<name>MEMSET</name>
<description>Common memory x setup time These bits
define the number of KCK_FMC (+1) clock cycles to set
up the address before the command assertion (NWE,
NOE), for NAND Flash read or write access to common
memory space:</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MEMWAIT</name>
<description>Common memory wait time These bits
define the minimum number of KCK_FMC (+1) clock
cycles to assert the command (NWE, NOE), for NAND
Flash read or write access to common memory space.
The duration of command assertion is extended if the
wait signal (NWAIT) is active (low) at the end of the
programmed value of KCK_FMC:</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MEMHOLD</name>
<description>Common memory hold time These bits
define the number of KCK_FMC clock cycles for write
accesses and KCK_FMC+1 clock cycles for read accesses
during which the address is held (and data for write
accesses) after the command is de-asserted (NWE,
NOE), for NAND Flash read or write access to common
memory space:</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MEMHIZ</name>
<description>Common memory x data bus Hi-Z time These
bits define the number of KCK_FMC clock cycles during
which the data bus is kept Hi-Z after the start of a
NAND Flash write access to common memory space. This
is only valid for write transactions:</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PATT</name>
<displayName>PATT</displayName>
<description>The FMC_PATT read/write register contains
the timing information for NAND Flash memory bank. It is
used for 8-bit accesses to the attribute memory space of
the NAND Flash for the last address write access if the
timing must differ from that of previous accesses (for
Ready/Busy management, refer to Section20.8.5: NAND Flash
prewait feature).</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFCFCFCFC</resetValue>
<fields>
<field>
<name>ATTSET</name>
<description>Attribute memory setup time These bits
define the number of KCK_FMC (+1) clock cycles to set
up address before the command assertion (NWE, NOE),
for NAND Flash read or write access to attribute
memory space:</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ATTWAIT</name>
<description>Attribute memory wait time These bits
define the minimum number of x KCK_FMC (+1) clock
cycles to assert the command (NWE, NOE), for NAND
Flash read or write access to attribute memory space.
The duration for command assertion is extended if the
wait signal (NWAIT) is active (low) at the end of the
programmed value of KCK_FMC:</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ATTHOLD</name>
<description>Attribute memory hold time These bits
define the number of KCK_FMC clock cycles during
which the address is held (and data for write access)
after the command de-assertion (NWE, NOE), for NAND
Flash read or write access to attribute memory
space:</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ATTHIZ</name>
<description>Attribute memory data bus Hi-Z time
These bits define the number of KCK_FMC clock cycles
during which the data bus is kept in Hi-Z after the
start of a NAND Flash write access to attribute
memory space on socket. Only valid for writ
transaction:</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>ECCR</name>
<displayName>ECCR</displayName>
<description>This register contain the current error
correction code value computed by the ECC computation
modules of the FMC NAND controller. When the CPU
reads/writes the data from a NAND Flash memory page at
the correct address (refer to Section20.8.6: Computation
of the error correction code (ECC) in NAND Flash memory),
the data read/written from/to the NAND Flash memory are
processed automatically by the ECC computation module.
When X bytes have been read (according to the ECCPS field
in the FMC_PCR registers), the CPU must read the computed
ECC value from the FMC_ECC registers. It then verifies if
these computed parity data are the same as the parity
value recorded in the spare area, to determine whether a
page is valid, and, to correct it otherwise. The FMC_ECCR
register should be cleared after being read by setting
the ECCEN bit to 0. To compute a new data block, the
ECCEN bit must be set to 1.</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECC</name>
<description>ECC result This field contains the value
computed by the ECC computation logic. Table167
describes the contents of these bit
fields.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>BWTR1</name>
<displayName>BWTR1</displayName>
<description>This register contains the control
information of each memory bank. It is used for SRAMs,
PSRAMs and NOR Flash memories. When the EXTMOD bit is set
in the FMC_BCRx register, then this register is active
for write access.</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration. These bits
are written by software to define the duration of the
address setup phase in KCK_FMC cycles (refer to
Figure81 to Figure93), used in asynchronous accesses:
... Note: In synchronous accesses, this value is not
used, the address setup phase is always 1 Flash clock
period duration. In muxed mode, the minimum ADDSET
value is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration. These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in asynchronous multiplexed accesses: ... Note:
In synchronous NOR Flash accesses, this value is not
used, the address hold phase is always 1 Flash clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration. These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous SRAM, PSRAM and NOR Flash memory
accesses:</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write transaction to match the minimum time between
consecutive transactions (tEHEL from ENx high to ENx
low): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin. The programmed bus turnaround delay is
inserted between a an asynchronous write transfer and
any other asynchronous /synchronous read or write
transfer to or from a static bank. If a read
operation is performed, the bank can be the same or a
different one, whereas it must be different in case
of write operation to the bank, except in muxed mode
or mode D. In some cases, whatever the programmed
BUSTRUN values, the bus turnaround delay is fixed as
follows: The bus turnaround delay is not inserted
between two consecutive asynchronous write transfers
to the same static memory bank except for muxed mode
and mode D. There is a bus turnaround delay of 2 FMC
clock cycle between: Two consecutive synchronous
write operations (in Burst or Single mode) to the
same bank A synchronous write transfer ((in Burst or
Single mode) and an asynchronous write or read
transfer to or from static memory bank. There is a
bus turnaround delay of 3 FMC clock cycle between:
Two consecutive synchronous write operations (in
Burst or Single mode) to different static banks. A
synchronous write transfer (in Burst or Single mode)
and a synchronous read from the same or a different
bank. ...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode. These bits specify the
asynchronous access modes as shown in the next timing
diagrams.These bits are taken into account only when
the EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BWTR2</name>
<displayName>BWTR2</displayName>
<description>This register contains the control
information of each memory bank. It is used for SRAMs,
PSRAMs and NOR Flash memories. When the EXTMOD bit is set
in the FMC_BCRx register, then this register is active
for write access.</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration. These bits
are written by software to define the duration of the
address setup phase in KCK_FMC cycles (refer to
Figure81 to Figure93), used in asynchronous accesses:
... Note: In synchronous accesses, this value is not
used, the address setup phase is always 1 Flash clock
period duration. In muxed mode, the minimum ADDSET
value is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration. These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in asynchronous multiplexed accesses: ... Note:
In synchronous NOR Flash accesses, this value is not
used, the address hold phase is always 1 Flash clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration. These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous SRAM, PSRAM and NOR Flash memory
accesses:</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write transaction to match the minimum time between
consecutive transactions (tEHEL from ENx high to ENx
low): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin. The programmed bus turnaround delay is
inserted between a an asynchronous write transfer and
any other asynchronous /synchronous read or write
transfer to or from a static bank. If a read
operation is performed, the bank can be the same or a
different one, whereas it must be different in case
of write operation to the bank, except in muxed mode
or mode D. In some cases, whatever the programmed
BUSTRUN values, the bus turnaround delay is fixed as
follows: The bus turnaround delay is not inserted
between two consecutive asynchronous write transfers
to the same static memory bank except for muxed mode
and mode D. There is a bus turnaround delay of 2 FMC
clock cycle between: Two consecutive synchronous
write operations (in Burst or Single mode) to the
same bank A synchronous write transfer ((in Burst or
Single mode) and an asynchronous write or read
transfer to or from static memory bank. There is a
bus turnaround delay of 3 FMC clock cycle between:
Two consecutive synchronous write operations (in
Burst or Single mode) to different static banks. A
synchronous write transfer (in Burst or Single mode)
and a synchronous read from the same or a different
bank. ...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode. These bits specify the
asynchronous access modes as shown in the next timing
diagrams.These bits are taken into account only when
the EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BWTR3</name>
<displayName>BWTR3</displayName>
<description>This register contains the control
information of each memory bank. It is used for SRAMs,
PSRAMs and NOR Flash memories. When the EXTMOD bit is set
in the FMC_BCRx register, then this register is active
for write access.</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration. These bits
are written by software to define the duration of the
address setup phase in KCK_FMC cycles (refer to
Figure81 to Figure93), used in asynchronous accesses:
... Note: In synchronous accesses, this value is not
used, the address setup phase is always 1 Flash clock
period duration. In muxed mode, the minimum ADDSET
value is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration. These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in asynchronous multiplexed accesses: ... Note:
In synchronous NOR Flash accesses, this value is not
used, the address hold phase is always 1 Flash clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration. These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous SRAM, PSRAM and NOR Flash memory
accesses:</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write transaction to match the minimum time between
consecutive transactions (tEHEL from ENx high to ENx
low): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin. The programmed bus turnaround delay is
inserted between a an asynchronous write transfer and
any other asynchronous /synchronous read or write
transfer to or from a static bank. If a read
operation is performed, the bank can be the same or a
different one, whereas it must be different in case
of write operation to the bank, except in muxed mode
or mode D. In some cases, whatever the programmed
BUSTRUN values, the bus turnaround delay is fixed as
follows: The bus turnaround delay is not inserted
between two consecutive asynchronous write transfers
to the same static memory bank except for muxed mode
and mode D. There is a bus turnaround delay of 2 FMC
clock cycle between: Two consecutive synchronous
write operations (in Burst or Single mode) to the
same bank A synchronous write transfer ((in Burst or
Single mode) and an asynchronous write or read
transfer to or from static memory bank. There is a
bus turnaround delay of 3 FMC clock cycle between:
Two consecutive synchronous write operations (in
Burst or Single mode) to different static banks. A
synchronous write transfer (in Burst or Single mode)
and a synchronous read from the same or a different
bank. ...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode. These bits specify the
asynchronous access modes as shown in the next timing
diagrams.These bits are taken into account only when
the EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BWTR4</name>
<displayName>BWTR4</displayName>
<description>This register contains the control
information of each memory bank. It is used for SRAMs,
PSRAMs and NOR Flash memories. When the EXTMOD bit is set
in the FMC_BCRx register, then this register is active
for write access.</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>ADDSET</name>
<description>Address setup phase duration. These bits
are written by software to define the duration of the
address setup phase in KCK_FMC cycles (refer to
Figure81 to Figure93), used in asynchronous accesses:
... Note: In synchronous accesses, this value is not
used, the address setup phase is always 1 Flash clock
period duration. In muxed mode, the minimum ADDSET
value is 1.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADDHLD</name>
<description>Address-hold phase duration. These bits
are written by software to define the duration of the
address hold phase (refer to Figure81 to Figure93),
used in asynchronous multiplexed accesses: ... Note:
In synchronous NOR Flash accesses, this value is not
used, the address hold phase is always 1 Flash clock
period duration.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAST</name>
<description>Data-phase duration. These bits are
written by software to define the duration of the
data phase (refer to Figure81 to Figure93), used in
asynchronous SRAM, PSRAM and NOR Flash memory
accesses:</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BUSTURN</name>
<description>Bus turnaround phase duration These bits
are written by software to add a delay at the end of
a write transaction to match the minimum time between
consecutive transactions (tEHEL from ENx high to ENx
low): (BUSTRUN + 1) KCK_FMC period &#8805;
tEHELmin. The programmed bus turnaround delay is
inserted between a an asynchronous write transfer and
any other asynchronous /synchronous read or write
transfer to or from a static bank. If a read
operation is performed, the bank can be the same or a
different one, whereas it must be different in case
of write operation to the bank, except in muxed mode
or mode D. In some cases, whatever the programmed
BUSTRUN values, the bus turnaround delay is fixed as
follows: The bus turnaround delay is not inserted
between two consecutive asynchronous write transfers
to the same static memory bank except for muxed mode
and mode D. There is a bus turnaround delay of 2 FMC
clock cycle between: Two consecutive synchronous
write operations (in Burst or Single mode) to the
same bank A synchronous write transfer ((in Burst or
Single mode) and an asynchronous write or read
transfer to or from static memory bank. There is a
bus turnaround delay of 3 FMC clock cycle between:
Two consecutive synchronous write operations (in
Burst or Single mode) to different static banks. A
synchronous write transfer (in Burst or Single mode)
and a synchronous read from the same or a different
bank. ...</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ACCMOD</name>
<description>Access mode. These bits specify the
asynchronous access modes as shown in the next timing
diagrams.These bits are taken into account only when
the EXTMOD bit in the FMC_BCRx register is
1.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>SDCR1</name>
<displayName>SDCR1</displayName>
<description>This register contains the control
parameters for each SDRAM memory bank</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x000002D0</resetValue>
<fields>
<field>
<name>NC</name>
<description>Number of column address bits These bits
define the number of bits of a column
address.</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NR</name>
<description>Number of row address bits These bits
define the number of bits of a row
address.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MWID</name>
<description>Memory data bus width. These bits define
the memory device width.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NB</name>
<description>Number of internal banks This bit sets
the number of internal banks.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAS</name>
<description>CAS Latency This bits sets the SDRAM CAS
latency in number of memory clock
cycles</description>
<bitOffset>7</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WP</name>
<description>Write protection This bit enables write
mode access to the SDRAM bank.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDCLK</name>
<description>SDRAM clock configuration These bits
define the SDRAM clock period for both SDRAM banks
and allow disabling the clock before changing the
frequency. In this case the SDRAM must be
re-initialized. Note: The corresponding bits in the
FMC_SDCR2 register is read only.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RBURST</name>
<description>Burst read This bit enables burst read
mode. The SDRAM controller anticipates the next read
commands during the CAS latency and stores data in
the Read FIFO. Note: The corresponding bit in the
FMC_SDCR2 register is read only.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RPIPE</name>
<description>Read pipe These bits define the delay,
in KCK_FMC clock cycles, for reading data after CAS
latency. Note: The corresponding bits in the
FMC_SDCR2 register is read only.</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>SDCR2</name>
<displayName>SDCR2</displayName>
<description>This register contains the control
parameters for each SDRAM memory bank</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x000002D0</resetValue>
<fields>
<field>
<name>NC</name>
<description>Number of column address bits These bits
define the number of bits of a column
address.</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NR</name>
<description>Number of row address bits These bits
define the number of bits of a row
address.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MWID</name>
<description>Memory data bus width. These bits define
the memory device width.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NB</name>
<description>Number of internal banks This bit sets
the number of internal banks.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAS</name>
<description>CAS Latency This bits sets the SDRAM CAS
latency in number of memory clock
cycles</description>
<bitOffset>7</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WP</name>
<description>Write protection This bit enables write
mode access to the SDRAM bank.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDCLK</name>
<description>SDRAM clock configuration These bits
define the SDRAM clock period for both SDRAM banks
and allow disabling the clock before changing the
frequency. In this case the SDRAM must be
re-initialized. Note: The corresponding bits in the
FMC_SDCR2 register is read only.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RBURST</name>
<description>Burst read This bit enables burst read
mode. The SDRAM controller anticipates the next read
commands during the CAS latency and stores data in
the Read FIFO. Note: The corresponding bit in the
FMC_SDCR2 register is read only.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RPIPE</name>
<description>Read pipe These bits define the delay,
in KCK_FMC clock cycles, for reading data after CAS
latency. Note: The corresponding bits in the
FMC_SDCR2 register is read only.</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>SDTR1</name>
<displayName>SDTR1</displayName>
<description>This register contains the timing parameters
of each SDRAM bank</description>
<addressOffset>0x148</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>TMRD</name>
<description>Load Mode Register to Active These bits
define the delay between a Load Mode Register command
and an Active or Refresh command in number of memory
clock cycles. ....</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TXSR</name>
<description>Exit Self-refresh delay These bits
define the delay from releasing the Self-refresh
command to issuing the Activate command in number of
memory clock cycles. .... Note: If two SDRAM devices
are used, the FMC_SDTR1 and FMC_SDTR2 must be
programmed with the same TXSR timing corresponding to
the slowest SDRAM device.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRAS</name>
<description>Self refresh time These bits define the
minimum Self-refresh period in number of memory clock
cycles. ....</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRC</name>
<description>Row cycle delay These bits define the
delay between the Refresh command and the Activate
command, as well as the delay between two consecutive
Refresh commands. It is expressed in number of memory
clock cycles. The TRC timing is only configured in
the FMC_SDTR1 register. If two SDRAM devices are
used, the TRC must be programmed with the timings of
the slowest device. .... Note: TRC must match the TRC
and TRFC (Auto Refresh period) timings defined in the
SDRAM device datasheet. Note: The corresponding bits
in the FMC_SDTR2 register are dont
care.</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TWR</name>
<description>Recovery delay These bits define the
delay between a Write and a Precharge command in
number of memory clock cycles. .... Note: TWR must be
programmed to match the write recovery time (tWR)
defined in the SDRAM datasheet, and to guarantee
that: TWR &#8805; TRAS - TRCD and TWR
&#8805;TRC - TRCD - TRP Example: TRAS= 4 cycles,
TRCD= 2 cycles. So, TWR &gt;= 2 cycles. TWR must
be programmed to 0x1. If two SDRAM devices are used,
the FMC_SDTR1 and FMC_SDTR2 must be programmed with
the same TWR timing corresponding to the slowest
SDRAM device.</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRP</name>
<description>Row precharge delay These bits define
the delay between a Precharge command and another
command in number of memory clock cycles. The TRP
timing is only configured in the FMC_SDTR1 register.
If two SDRAM devices are used, the TRP must be
programmed with the timing of the slowest device.
.... Note: The corresponding bits in the FMC_SDTR2
register are dont care.</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRCD</name>
<description>Row to column delay These bits define
the delay between the Activate command and a
Read/Write command in number of memory clock cycles.
....</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>SDTR2</name>
<displayName>SDTR2</displayName>
<description>This register contains the timing parameters
of each SDRAM bank</description>
<addressOffset>0x14C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFFFFFF</resetValue>
<fields>
<field>
<name>TMRD</name>
<description>Load Mode Register to Active These bits
define the delay between a Load Mode Register command
and an Active or Refresh command in number of memory
clock cycles. ....</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TXSR</name>
<description>Exit Self-refresh delay These bits
define the delay from releasing the Self-refresh
command to issuing the Activate command in number of
memory clock cycles. .... Note: If two SDRAM devices
are used, the FMC_SDTR1 and FMC_SDTR2 must be
programmed with the same TXSR timing corresponding to
the slowest SDRAM device.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRAS</name>
<description>Self refresh time These bits define the
minimum Self-refresh period in number of memory clock
cycles. ....</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRC</name>
<description>Row cycle delay These bits define the
delay between the Refresh command and the Activate
command, as well as the delay between two consecutive
Refresh commands. It is expressed in number of memory
clock cycles. The TRC timing is only configured in
the FMC_SDTR1 register. If two SDRAM devices are
used, the TRC must be programmed with the timings of
the slowest device. .... Note: TRC must match the TRC
and TRFC (Auto Refresh period) timings defined in the
SDRAM device datasheet. Note: The corresponding bits
in the FMC_SDTR2 register are dont
care.</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TWR</name>
<description>Recovery delay These bits define the
delay between a Write and a Precharge command in
number of memory clock cycles. .... Note: TWR must be
programmed to match the write recovery time (tWR)
defined in the SDRAM datasheet, and to guarantee
that: TWR &#8805; TRAS - TRCD and TWR
&#8805;TRC - TRCD - TRP Example: TRAS= 4 cycles,
TRCD= 2 cycles. So, TWR &gt;= 2 cycles. TWR must
be programmed to 0x1. If two SDRAM devices are used,
the FMC_SDTR1 and FMC_SDTR2 must be programmed with
the same TWR timing corresponding to the slowest
SDRAM device.</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRP</name>
<description>Row precharge delay These bits define
the delay between a Precharge command and another
command in number of memory clock cycles. The TRP
timing is only configured in the FMC_SDTR1 register.
If two SDRAM devices are used, the TRP must be
programmed with the timing of the slowest device.
.... Note: The corresponding bits in the FMC_SDTR2
register are dont care.</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TRCD</name>
<description>Row to column delay These bits define
the delay between the Activate command and a
Read/Write command in number of memory clock cycles.
....</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>SDCMR</name>
<displayName>SDCMR</displayName>
<description>This register contains the command issued
when the SDRAM device is accessed. This register is used
to initialize the SDRAM device, and to activate the
Self-refresh and the Power-down modes. As soon as the
MODE field is written, the command will be issued only to
one or to both SDRAM banks according to CTB1 and CTB2
command bits. This register is the same for both SDRAM
banks.</description>
<addressOffset>0x150</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MODE</name>
<description>Command mode These bits define the
command issued to the SDRAM device. Note: When a
command is issued, at least one Command Target Bank
bit ( CTB1 or CTB2) must be set otherwise the command
will be ignored. Note: If two SDRAM banks are used,
the Auto-refresh and PALL command must be issued
simultaneously to the two devices with CTB1 and CTB2
bits set otherwise the command will be ignored. Note:
If only one SDRAM bank is used and a command is
issued with its associated CTB bit set, the other CTB
bit of the unused bank must be kept to
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CTB2</name>
<description>Command Target Bank 2 This bit indicates
whether the command will be issued to SDRAM Bank 2 or
not.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTB1</name>
<description>Command Target Bank 1 This bit indicates
whether the command will be issued to SDRAM Bank 1 or
not.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRFS</name>
<description>Number of Auto-refresh These bits define
the number of consecutive Auto-refresh commands
issued when MODE = 011. ....</description>
<bitOffset>5</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MRD</name>
<description>Mode Register definition This 14-bit
field defines the SDRAM Mode Register content. The
Mode Register is programmed using the Load Mode
Register command. The MRD[13:0] bits are also used to
program the extended mode register for mobile
SDRAM.</description>
<bitOffset>9</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>SDRTR</name>
<displayName>SDRTR</displayName>
<description>This register sets the refresh rate in
number of SDCLK clock cycles between the refresh cycles
by configuring the Refresh Timer Count value.Examplewhere
64 ms is the SDRAM refresh period.The refresh rate must
be increased by 20 SDRAM clock cycles (as in the above
example) to obtain a safe margin if an internal refresh
request occurs when a read request has been accepted. It
corresponds to a COUNT value of 0000111000000 (448). This
13-bit field is loaded into a timer which is decremented
using the SDRAM clock. This timer generates a refresh
pulse when zero is reached. The COUNT value must be set
at least to 41 SDRAM clock cycles.As soon as the
FMC_SDRTR register is programmed, the timer starts
counting. If the value programmed in the register is 0,
no refresh is carried out. This register must not be
reprogrammed after the initialization procedure to avoid
modifying the refresh rate.Each time a refresh pulse is
generated, this 13-bit COUNT field is reloaded into the
counter.If a memory access is in progress, the
Auto-refresh request is delayed. However, if the memory
access and Auto-refresh requests are generated
simultaneously, the Auto-refresh takes precedence. If the
memory access occurs during a refresh operation, the
request is buffered to be processed when the refresh is
complete.This register is common to SDRAM bank 1 and bank
2.</description>
<addressOffset>0x154</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRE</name>
<description>Clear Refresh error flag This bit is
used to clear the Refresh Error Flag (RE) in the
Status Register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COUNT</name>
<description>Refresh Timer Count This 13-bit field
defines the refresh rate of the SDRAM device. It is
expressed in number of memory clock cycles. It must
be set at least to 41 SDRAM clock cycles (0x29).
Refresh rate = (COUNT + 1) x SDRAM frequency clock
COUNT = (SDRAM refresh period / Number of rows) -
20</description>
<bitOffset>1</bitOffset>
<bitWidth>13</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REIE</name>
<description>RES Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SDSR</name>
<displayName>SDSR</displayName>
<description>SDRAM Status register</description>
<addressOffset>0x158</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RE</name>
<description>Refresh error flag An interrupt is
generated if REIE = 1 and RE = 1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODES1</name>
<description>Status Mode for Bank 1 These bits define
the Status Mode of SDRAM Bank 1.</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODES2</name>
<description>Status Mode for Bank 2 These bits define
the Status Mode of SDRAM Bank 2.</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>CEC</name>
<description>CEC</description>
<groupName>CEC</groupName>
<baseAddress>0x40006C00</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>CEC</name>
<description>HDMI-CEC global interrupt</description>
<value>94</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>CEC control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CECEN</name>
<description>CEC Enable The CECEN bit is set and
cleared by software. CECEN=1 starts message reception
and enables the TXSOM control. CECEN=0 disables the
CEC peripheral, clears all bits of CEC_CR register
and aborts any on-going reception or
transmission.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSOM</name>
<description>Tx Start Of Message TXSOM is set by
software to command transmission of the first byte of
a CEC message. If the CEC message consists of only
one byte, TXEOM must be set before of TXSOM.
Start-Bit is effectively started on the CEC line
after SFT is counted. If TXSOM is set while a message
reception is ongoing, transmission will start after
the end of reception. TXSOM is cleared by hardware
after the last byte of the message is sent with a
positive acknowledge (TXEND=1), in case of
transmission underrun (TXUDR=1), negative acknowledge
(TXACKE=1), and transmission error (TXERR=1). It is
also cleared by CECEN=0. It is not cleared and
transmission is automatically retried in case of
arbitration lost (ARBLST=1). TXSOM can be also used
as a status bit informing application whether any
transmission request is pending or under execution.
The application can abort a transmission request at
any time by clearing the CECEN bit. Note: TXSOM must
be set when CECEN=1 TXSOM must be set when
transmission data is available into TXDR HEADERs
first four bits containing own peripheral address are
taken from TXDR[7:4], not from CEC_CFGR.OAR which is
used only for reception</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEOM</name>
<description>Tx End Of Message The TXEOM bit is set
by software to command transmission of the last byte
of a CEC message. TXEOM is cleared by hardware at the
same time and under the same conditions as for TXSOM.
Note: TXEOM must be set when CECEN=1 TXEOM must be
set before writing transmission data to TXDR If TXEOM
is set when TXSOM=0, transmitted message will consist
of 1 byte (HEADER) only (PING message)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>This register is used to configure the
HDMI-CEC controller. It is mandatory to write CEC_CFGR
only when CECEN=0.</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SFT</name>
<description>Signal Free Time SFT bits are set by
software. In the SFT=0x0 configuration the number of
nominal data bit periods waited before transmission
is ruled by hardware according to the transmission
history. In all the other configurations the SFT
number is determined by software. * 0x0 ** 2.5
Data-Bit periods if CEC is the last bus initiator
with unsuccessful transmission (ARBLST=1, TXERR=1,
TXUDR=1 or TXACKE= 1) ** 4 Data-Bit periods if CEC is
the new bus initiator ** 6 Data-Bit periods if CEC is
the last bus initiator with successful transmission
(TXEOM=1) * 0x1: 0.5 nominal data bit periods * 0x2:
1.5 nominal data bit periods * 0x3: 2.5 nominal data
bit periods * 0x4: 3.5 nominal data bit periods *
0x5: 4.5 nominal data bit periods * 0x6: 5.5 nominal
data bit periods * 0x7: 6.5 nominal data bit
periods</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RXTOL</name>
<description>Rx-Tolerance The RXTOL bit is set and
cleared by software. ** Start-Bit, +/- 200 s rise,
+/- 200 s fall. ** Data-Bit: +/- 200 s rise. +/- 350
s fall. ** Start-Bit: +/- 400 s rise, +/- 400 s fall
** Data-Bit: +/-300 s rise, +/- 500 s
fall</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRESTP</name>
<description>Rx-Stop on Bit Rising Error The BRESTP
bit is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BREGEN</name>
<description>Generate Error-Bit on Bit Rising Error
The BREGEN bit is set and cleared by software. Note:
If BRDNOGEN=0, an Error-bit is generated upon BRE
detection with BRESTP=1 in broadcast even if
BREGEN=0</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBPEGEN</name>
<description>Generate Error-Bit on Long Bit Period
Error The LBPEGEN bit is set and cleared by software.
Note: If BRDNOGEN=0, an Error-bit is generated upon
LBPE detection in broadcast even if
LBPEGEN=0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDNOGEN</name>
<description>Avoid Error-Bit Generation in Broadcast
The BRDNOGEN bit is set and cleared by
software.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFTOPT</name>
<description>SFT Option Bit The SFTOPT bit is set and
cleared by software.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OAR</name>
<description>Own addresses configuration The OAR bits
are set by software to select which destination
logical addresses has to be considered in receive
mode. Each bit, when set, enables the CEC logical
address identified by the given bit position. At the
end of HEADER reception, the received destination
address is compared with the enabled addresses. In
case of matching address, the incoming message is
acknowledged and received. In case of non-matching
address, the incoming message is received only in
listen mode (LSTN=1), but without acknowledge sent.
Broadcast messages are always received. Example: OAR
= 0b000 0000 0010 0001 means that CEC acknowledges
addresses 0x0 and 0x5. Consequently, each message
directed to one of these addresses is
received.</description>
<bitOffset>16</bitOffset>
<bitWidth>15</bitWidth>
</field>
<field>
<name>LSTN</name>
<description>Listen mode LSTN bit is set and cleared
by software.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXDR</name>
<displayName>TXDR</displayName>
<description>CEC Tx data register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXD</name>
<description>Tx Data register. TXD is a write-only
register containing the data byte to be transmitted.
Note: TXD must be written when
TXSTART=1</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXDR</name>
<displayName>RXDR</displayName>
<description>CEC Rx Data Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXD</name>
<description>Rx Data register. RXD is read-only and
contains the last data byte which has been received
from the CEC line.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>CEC Interrupt and Status
Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXBR</name>
<description>Rx-Byte Received The RXBR bit is set by
hardware to inform application that a new byte has
been received from the CEC line and stored into the
RXD buffer. RXBR is cleared by software write at
1.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXEND</name>
<description>End Of Reception RXEND is set by
hardware to inform application that the last byte of
a CEC message is received from the CEC line and
stored into the RXD buffer. RXEND is set at the same
time of RXBR. RXEND is cleared by software write at
1.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVR</name>
<description>Rx-Overrun RXOVR is set by hardware if
RXBR is not yet cleared at the time a new byte is
received on the CEC line and stored into RXD. RXOVR
assertion stops message reception so that no
acknowledge is sent. In case of broadcast, a negative
acknowledge is sent. RXOVR is cleared by software
write at 1.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRE</name>
<description>Rx-Bit Rising Error BRE is set by
hardware in case a Data-Bit waveform is detected with
Bit Rising Error. BRE is set either at the time the
misplaced rising edge occurs, or at the end of the
maximum BRE tolerance allowed by RXTOL, in case
rising edge is still longing. BRE stops message
reception if BRESTP=1. BRE generates an Error-Bit on
the CEC line if BREGEN=1. BRE is cleared by software
write at 1.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBPE</name>
<description>Rx-Short Bit Period Error SBPE is set by
hardware in case a Data-Bit waveform is detected with
Short Bit Period Error. SBPE is set at the time the
anticipated falling edge occurs. SBPE generates an
Error-Bit on the CEC line. SBPE is cleared by
software write at 1.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBPE</name>
<description>Rx-Long Bit Period Error LBPE is set by
hardware in case a Data-Bit waveform is detected with
Long Bit Period Error. LBPE is set at the end of the
maximum bit-extension tolerance allowed by RXTOL, in
case falling edge is still longing. LBPE always stops
reception of the CEC message. LBPE generates an
Error-Bit on the CEC line if LBPEGEN=1. In case of
broadcast, Error-Bit is generated even in case of
LBPEGEN=0. LBPE is cleared by software write at
1.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXACKE</name>
<description>Rx-Missing Acknowledge In receive mode,
RXACKE is set by hardware to inform application that
no acknowledge was seen on the CEC line. RXACKE
applies only for broadcast messages and in listen
mode also for not directly addressed messages
(destination address not enabled in OAR). RXACKE
aborts message reception. RXACKE is cleared by
software write at 1.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost ARBLST is set by
hardware to inform application that CEC device is
switching to reception due to arbitration lost event
following the TXSOM command. ARBLST can be due either
to a contending CEC device starting earlier or
starting at the same time but with higher HEADER
priority. After ARBLST assertion TXSOM bit keeps
pending for next transmission attempt. ARBLST is
cleared by software write at 1.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXBR</name>
<description>Tx-Byte Request TXBR is set by hardware
to inform application that the next transmission data
has to be written to TXDR. TXBR is set when the 4th
bit of currently transmitted byte is sent.
Application must write the next byte to TXDR within 6
nominal data-bit periods before transmission underrun
error occurs (TXUDR). TXBR is cleared by software
write at 1.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEND</name>
<description>End of Transmission TXEND is set by
hardware to inform application that the last byte of
the CEC message has been successfully transmitted.
TXEND clears the TXSOM and TXEOM control bits. TXEND
is cleared by software write at 1.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUDR</name>
<description>Tx-Buffer Underrun In transmission mode,
TXUDR is set by hardware if application was not in
time to load TXDR before of next byte transmission.
TXUDR aborts message transmission and clears TXSOM
and TXEOM control bits. TXUDR is cleared by software
write at 1</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Tx-Error In transmission mode, TXERR is
set by hardware if the CEC initiator detects low
impedance on the CEC line while it is released. TXERR
aborts message transmission and clears TXSOM and
TXEOM controls. TXERR is cleared by software write at
1.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXACKE</name>
<description>Tx-Missing Acknowledge Error In
transmission mode, TXACKE is set by hardware to
inform application that no acknowledge was received.
In case of broadcast transmission, TXACKE informs
application that a negative acknowledge was received.
TXACKE aborts message transmission and clears TXSOM
and TXEOM controls. TXACKE is cleared by software
write at 1.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>CEC interrupt enable register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXBRIE</name>
<description>Rx-Byte Received Interrupt Enable The
RXBRIE bit is set and cleared by
software.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXENDIE</name>
<description>End Of Reception Interrupt Enable The
RXENDIE bit is set and cleared by
software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVRIE</name>
<description>Rx-Buffer Overrun Interrupt Enable The
RXOVRIE bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BREIE</name>
<description>Bit Rising Error Interrupt Enable The
BREIE bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBPEIE</name>
<description>Short Bit Period Error Interrupt Enable
The SBPEIE bit is set and cleared by
software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBPEIE</name>
<description>Long Bit Period Error Interrupt Enable
The LBPEIE bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXACKIE</name>
<description>Rx-Missing Acknowledge Error Interrupt
Enable The RXACKIE bit is set and cleared by
software.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARBLSTIE</name>
<description>Arbitration Lost Interrupt Enable The
ARBLSTIE bit is set and cleared by
software.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXBRIE</name>
<description>Tx-Byte Request Interrupt Enable The
TXBRIE bit is set and cleared by
software.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXENDIE</name>
<description>Tx-End Of Message Interrupt Enable The
TXENDIE bit is set and cleared by
software.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUDRIE</name>
<description>Tx-Underrun Interrupt Enable The TXUDRIE
bit is set and cleared by software.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRIE</name>
<description>Tx-Error Interrupt Enable The TXERRIE
bit is set and cleared by software.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXACKIE</name>
<description>Tx-Missing Acknowledge Error Interrupt
Enable The TXACKEIE bit is set and cleared by
software.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HSEM</name>
<description>HSEM</description>
<groupName>HSEM</groupName>
<baseAddress>0x58026400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HSEM0</name>
<description>HSEM global interrupt 1</description>
<value>125</value>
</interrupt>
<registers>
<register>
<name>HSEM_R0</name>
<displayName>HSEM_R0</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R1</name>
<displayName>HSEM_R1</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R2</name>
<displayName>HSEM_R2</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R3</name>
<displayName>HSEM_R3</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R4</name>
<displayName>HSEM_R4</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R5</name>
<displayName>HSEM_R5</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R6</name>
<displayName>HSEM_R6</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R7</name>
<displayName>HSEM_R7</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R8</name>
<displayName>HSEM_R8</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R9</name>
<displayName>HSEM_R9</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R10</name>
<displayName>HSEM_R10</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R11</name>
<displayName>HSEM_R11</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R12</name>
<displayName>HSEM_R12</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R13</name>
<displayName>HSEM_R13</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R14</name>
<displayName>HSEM_R14</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R15</name>
<displayName>HSEM_R15</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R16</name>
<displayName>HSEM_R16</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R17</name>
<displayName>HSEM_R17</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R18</name>
<displayName>HSEM_R18</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R19</name>
<displayName>HSEM_R19</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R20</name>
<displayName>HSEM_R20</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R21</name>
<displayName>HSEM_R21</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R22</name>
<displayName>HSEM_R22</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R23</name>
<displayName>HSEM_R23</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R24</name>
<displayName>HSEM_R24</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R25</name>
<displayName>HSEM_R25</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R26</name>
<displayName>HSEM_R26</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R27</name>
<displayName>HSEM_R27</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R28</name>
<displayName>HSEM_R28</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R29</name>
<displayName>HSEM_R29</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R30</name>
<displayName>HSEM_R30</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x78</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_R31</name>
<displayName>HSEM_R31</displayName>
<description>HSEM register HSEM_R0 HSEM_R31</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR0</name>
<displayName>HSEM_RLR0</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR1</name>
<displayName>HSEM_RLR1</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR2</name>
<displayName>HSEM_RLR2</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR3</name>
<displayName>HSEM_RLR3</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR4</name>
<displayName>HSEM_RLR4</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR5</name>
<displayName>HSEM_RLR5</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR6</name>
<displayName>HSEM_RLR6</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR7</name>
<displayName>HSEM_RLR7</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR8</name>
<displayName>HSEM_RLR8</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR9</name>
<displayName>HSEM_RLR9</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR10</name>
<displayName>HSEM_RLR10</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR11</name>
<displayName>HSEM_RLR11</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR12</name>
<displayName>HSEM_RLR12</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR13</name>
<displayName>HSEM_RLR13</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR14</name>
<displayName>HSEM_RLR14</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR15</name>
<displayName>HSEM_RLR15</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR16</name>
<displayName>HSEM_RLR16</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR17</name>
<displayName>HSEM_RLR17</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR18</name>
<displayName>HSEM_RLR18</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR19</name>
<displayName>HSEM_RLR19</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR20</name>
<displayName>HSEM_RLR20</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR21</name>
<displayName>HSEM_RLR21</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR22</name>
<displayName>HSEM_RLR22</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR23</name>
<displayName>HSEM_RLR23</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR24</name>
<displayName>HSEM_RLR24</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xE0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR25</name>
<displayName>HSEM_RLR25</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xE4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR26</name>
<displayName>HSEM_RLR26</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xE8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR27</name>
<displayName>HSEM_RLR27</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xEC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR28</name>
<displayName>HSEM_RLR28</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xF0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR29</name>
<displayName>HSEM_RLR29</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xF4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR30</name>
<displayName>HSEM_RLR30</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xF8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_RLR31</name>
<displayName>HSEM_RLR31</displayName>
<description>HSEM Read lock register</description>
<addressOffset>0xFC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROCID</name>
<description>Semaphore ProcessID</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MASTERID</name>
<description>Semaphore MasterID</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock indication</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_IER</name>
<displayName>HSEM_IER</displayName>
<description>HSEM Interrupt enable register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ISEM0</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM1</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM2</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM3</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM4</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM5</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM6</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM7</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM8</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM9</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM10</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM11</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM12</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM13</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM14</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM15</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM16</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM17</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM18</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM19</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM20</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM21</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM22</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM23</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM24</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM25</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM26</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM27</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM28</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM29</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM30</name>
<description>Interrupt semaphore n enable
bit</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM31</name>
<description>Interrupt(N) semaphore n enable
bit.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_ICR</name>
<displayName>HSEM_ICR</displayName>
<description>HSEM Interrupt clear register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ISEM0</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM1</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM2</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM3</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM4</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM5</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM6</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM7</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM8</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM9</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM10</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM11</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM12</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM13</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM14</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM15</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM16</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM17</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM18</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM19</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM20</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM21</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM22</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM23</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM24</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM25</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM26</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM27</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM28</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM29</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM30</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM31</name>
<description>Interrupt(N) semaphore n clear
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_ISR</name>
<displayName>HSEM_ISR</displayName>
<description>HSEM Interrupt status register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ISEM0</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM1</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM2</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM3</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM4</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM5</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM6</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM7</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM8</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM9</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM10</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM11</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM12</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM13</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM14</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM15</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM16</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM17</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM18</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM19</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM20</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM21</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM22</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM23</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM24</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM25</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM26</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM27</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM28</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM29</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM30</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM31</name>
<description>Interrupt(N) semaphore n status bit
before enable (mask)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_MISR</name>
<displayName>HSEM_MISR</displayName>
<description>HSEM Masked interrupt status
register</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ISEM0</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM1</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM2</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM3</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM4</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM5</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM6</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM7</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM8</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM9</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM10</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM11</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM12</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM13</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM14</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM15</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM16</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM17</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM18</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM19</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM20</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM21</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM22</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM23</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM24</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM25</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM26</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM27</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM28</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM29</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM30</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISEM31</name>
<description>masked interrupt(N) semaphore n status
bit after enable (mask)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_CR</name>
<displayName>HSEM_CR</displayName>
<description>HSEM Clear register</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MASTERID</name>
<description>MasterID of semaphores to be
cleared</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>KEY</name>
<description>Semaphore clear Key</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSEM_KEYR</name>
<displayName>HSEM_KEYR</displayName>
<description>HSEM Interrupt clear register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY</name>
<description>Semaphore Clear Key</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>I2C1</name>
<description>I2C</description>
<groupName>I2C</groupName>
<baseAddress>0x40005400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>I2C1_EV</name>
<description>I2C1 event interrupt</description>
<value>31</value>
</interrupt>
<interrupt>
<name>I2C1_ER</name>
<description>I2C1 error interrupt</description>
<value>32</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>Access: No wait states, except if a write
access occurs while a write access to this register is
ongoing. In this case, wait states are inserted in the
second write access until the previous one is completed.
The latency of the second write access can be up to 2 x
PCLK1 + 6 x I2CCLK.</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PE</name>
<description>Peripheral enable Note: When PE=0, the
I2C SCL and SDA lines are released. Internal state
machines and status bits are put back to their reset
value. When cleared, PE must be kept low for at least
3 APB clock cycles.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXIE</name>
<description>TX Interrupt enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXIE</name>
<description>RX Interrupt enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDRIE</name>
<description>Address match Interrupt enable (slave
only)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NACKIE</name>
<description>Not acknowledge received Interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOPIE</name>
<description>STOP detection Interrupt
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer Complete interrupt enable Note:
Any of these events will generate an interrupt:
Transfer Complete (TC) Transfer Complete Reload
(TCR)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERRIE</name>
<description>Error interrupts enable Note: Any of
these errors generate an interrupt: Arbitration Loss
(ARLO) Bus Error detection (BERR) Overrun/Underrun
(OVR) Timeout detection (TIMEOUT) PEC error detection
(PECERR) Alert pin event detection
(ALERT)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNF</name>
<description>Digital noise filter These bits are used
to configure the digital noise filter on SDA and SCL
input. The digital filter will filter spikes with a
length of up to DNF[3:0] * tI2CCLK ... Note: If the
analog filter is also enabled, the digital filter is
added to the analog filter. This filter can only be
programmed when the I2C is disabled (PE =
0).</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ANFOFF</name>
<description>Analog noise filter OFF Note: This bit
can only be programmed when the I2C is disabled (PE =
0).</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXDMAEN</name>
<description>DMA transmission requests
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXDMAEN</name>
<description>DMA reception requests
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBC</name>
<description>Slave byte control This bit is used to
enable hardware byte control in slave
mode.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOSTRETCH</name>
<description>Clock stretching disable This bit is
used to disable clock stretching in slave mode. It
must be kept cleared in master mode. Note: This bit
can only be programmed when the I2C is disabled (PE =
0).</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUPEN</name>
<description>Wakeup from Stop mode enable Note: If
the Wakeup from Stop mode feature is not supported,
this bit is reserved and forced by hardware to 0.
Please refer to Section25.3: I2C implementation.
Note: WUPEN can be set only when DNF =
0000</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCEN</name>
<description>General call enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMBHEN</name>
<description>SMBus Host address enable Note: If the
SMBus feature is not supported, this bit is reserved
and forced by hardware to 0. Please refer to
Section25.3: I2C implementation.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMBDEN</name>
<description>SMBus Device Default address enable
Note: If the SMBus feature is not supported, this bit
is reserved and forced by hardware to 0. Please refer
to Section25.3: I2C implementation.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALERTEN</name>
<description>SMBus alert enable Device mode
(SMBHEN=0): Host mode (SMBHEN=1): Note: When
ALERTEN=0, the SMBA pin can be used as a standard
GPIO. If the SMBus feature is not supported, this bit
is reserved and forced by hardware to 0. Please refer
to Section25.3: I2C implementation.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PECEN</name>
<description>PEC enable Note: If the SMBus feature is
not supported, this bit is reserved and forced by
hardware to 0. Please refer to Section25.3: I2C
implementation.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>Access: No wait states, except if a write
access occurs while a write access to this register is
ongoing. In this case, wait states are inserted in the
second write access until the previous one is completed.
The latency of the second write access can be up to 2 x
PCLK1 + 6 x I2CCLK.</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADD0</name>
<description>Slave address bit 0 (master mode) In
7-bit addressing mode (ADD10 = 0): This bit is dont
care In 10-bit addressing mode (ADD10 = 1): This bit
should be written with bit 0 of the slave address to
be sent Note: Changing these bits when the START bit
is set is not allowed.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD1</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD2</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD3</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD4</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD5</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD6</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD7</name>
<description>Slave address bit 7:1 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits should
be written with the 7-bit slave address to be sent In
10-bit addressing mode (ADD10 = 1): These bits should
be written with bits 7:1 of the slave address to be
sent. Note: Changing these bits when the START bit is
set is not allowed.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD8</name>
<description>Slave address bit 9:8 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits are
dont care In 10-bit addressing mode (ADD10 = 1):
These bits should be written with bits 9:8 of the
slave address to be sent Note: Changing these bits
when the START bit is set is not
allowed.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SADD9</name>
<description>Slave address bit 9:8 (master mode) In
7-bit addressing mode (ADD10 = 0): These bits are
dont care In 10-bit addressing mode (ADD10 = 1):
These bits should be written with bits 9:8 of the
slave address to be sent Note: Changing these bits
when the START bit is set is not
allowed.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RD_WRN</name>
<description>Transfer direction (master mode) Note:
Changing this bit when the START bit is set is not
allowed.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADD10</name>
<description>10-bit addressing mode (master mode)
Note: Changing this bit when the START bit is set is
not allowed.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HEAD10R</name>
<description>10-bit address header only read
direction (master receiver mode) Note: Changing this
bit when the START bit is set is not
allowed.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START</name>
<description>Start generation This bit is set by
software, and cleared by hardware after the Start
followed by the address sequence is sent, by an
arbitration loss, by a timeout error detection, or
when PE = 0. It can also be cleared by software by
writing 1 to the ADDRCF bit in the I2C_ICR register.
If the I2C is already in master mode with AUTOEND =
0, setting this bit generates a Repeated Start
condition when RELOAD=0, after the end of the NBYTES
transfer. Otherwise setting this bit will generate a
START condition once the bus is free. Note: Writing 0
to this bit has no effect. The START bit can be set
even if the bus is BUSY or I2C is in slave mode. This
bit has no effect when RELOAD is set.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOP</name>
<description>Stop generation (master mode) The bit is
set by software, cleared by hardware when a Stop
condition is detected, or when PE = 0. In Master
Mode: Note: Writing 0 to this bit has no
effect.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NACK</name>
<description>NACK generation (slave mode) The bit is
set by software, cleared by hardware when the NACK is
sent, or when a STOP condition or an Address matched
is received, or when PE=0. Note: Writing 0 to this
bit has no effect. This bit is used in slave mode
only: in master receiver mode, NACK is automatically
generated after last byte preceding STOP or RESTART
condition, whatever the NACK bit value. When an
overrun occurs in slave receiver NOSTRETCH mode, a
NACK is automatically generated whatever the NACK bit
value. When hardware PEC checking is enabled
(PECBYTE=1), the PEC acknowledge value does not
depend on the NACK value.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NBYTES</name>
<description>Number of bytes The number of bytes to
be transmitted/received is programmed there. This
field is dont care in slave mode with SBC=0. Note:
Changing these bits when the START bit is set is not
allowed.</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RELOAD</name>
<description>NBYTES reload mode This bit is set and
cleared by software.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AUTOEND</name>
<description>Automatic end mode (master mode) This
bit is set and cleared by software. Note: This bit
has no effect in slave mode or when the RELOAD bit is
set.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PECBYTE</name>
<description>Packet error checking byte This bit is
set by software, and cleared by hardware when the PEC
is transferred, or when a STOP condition or an
Address matched is received, also when PE=0. Note:
Writing 0 to this bit has no effect. This bit has no
effect when RELOAD is set. This bit has no effect is
slave mode when SBC=0. If the SMBus feature is not
supported, this bit is reserved and forced by
hardware to 0. Please refer to Section25.3: I2C
implementation.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OAR1</name>
<displayName>OAR1</displayName>
<description>Access: No wait states, except if a write
access occurs while a write access to this register is
ongoing. In this case, wait states are inserted in the
second write access until the previous one is completed.
The latency of the second write access can be up to 2 x
PCLK1 + 6 x I2CCLK.</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OA1</name>
<description>Interface address 7-bit addressing mode:
dont care 10-bit addressing mode: bits 9:8 of address
Note: These bits can be written only when OA1EN=0.
OA1[7:1]: Interface address Bits 7:1 of address Note:
These bits can be written only when OA1EN=0. OA1[0]:
Interface address 7-bit addressing mode: dont care
10-bit addressing mode: bit 0 of address Note: This
bit can be written only when OA1EN=0.</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>OA1MODE</name>
<description>Own Address 1 10-bit mode Note: This bit
can be written only when OA1EN=0.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OA1EN</name>
<description>Own Address 1 enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OAR2</name>
<displayName>OAR2</displayName>
<description>Access: No wait states, except if a write
access occurs while a write access to this register is
ongoing. In this case, wait states are inserted in the
second write access until the previous one is completed.
The latency of the second write access can be up to 2 x
PCLK1 + 6 x I2CCLK.</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OA2</name>
<description>Interface address bits 7:1 of address
Note: These bits can be written only when
OA2EN=0.</description>
<bitOffset>1</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>OA2MSK</name>
<description>Own Address 2 masks Note: These bits can
be written only when OA2EN=0. As soon as OA2MSK is
not equal to 0, the reserved I2C addresses (0b0000xxx
and 0b1111xxx) are not acknowledged even if the
comparison matches.</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OA2EN</name>
<description>Own Address 2 enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMINGR</name>
<displayName>TIMINGR</displayName>
<description>Access: No wait states</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCLL</name>
<description>SCL low period (master mode) This field
is used to generate the SCL low period in master
mode. tSCLL = (SCLL+1) x tPRESC Note: SCLL is also
used to generate tBUF and tSU:STA
timings.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SCLH</name>
<description>SCL high period (master mode) This field
is used to generate the SCL high period in master
mode. tSCLH = (SCLH+1) x tPRESC Note: SCLH is also
used to generate tSU:STO and tHD:STA
timing.</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SDADEL</name>
<description>Data hold time This field is used to
generate the delay tSDADEL between SCL falling edge
and SDA edge. In master mode and in slave mode with
NOSTRETCH = 0, the SCL line is stretched low during
tSDADEL. tSDADEL= SDADEL x tPRESC Note: SDADEL is
used to generate tHD:DAT timing.</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SCLDEL</name>
<description>Data setup time This field is used to
generate a delay tSCLDEL between SDA edge and SCL
rising edge. In master mode and in slave mode with
NOSTRETCH = 0, the SCL line is stretched low during
tSCLDEL. tSCLDEL = (SCLDEL+1) x tPRESC Note: tSCLDEL
is used to generate tSU:DAT timing.</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PRESC</name>
<description>Timing prescaler This field is used to
prescale I2CCLK in order to generate the clock period
tPRESC used for data setup and hold counters (refer
to I2C timings on page9) and for SCL high and low
level counters (refer to I2C master initialization on
page24). tPRESC = (PRESC+1) x tI2CCLK</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMEOUTR</name>
<displayName>TIMEOUTR</displayName>
<description>Access: No wait states, except if a write
access occurs while a write access to this register is
ongoing. In this case, wait states are inserted in the
second write access until the previous one is completed.
The latency of the second write access can be up to 2 x
PCLK1 + 6 x I2CCLK.</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMEOUTA</name>
<description>Bus Timeout A This field is used to
configure: The SCL low timeout condition tTIMEOUT
when TIDLE=0 tTIMEOUT= (TIMEOUTA+1) x 2048 x tI2CCLK
The bus idle condition (both SCL and SDA high) when
TIDLE=1 tIDLE= (TIMEOUTA+1) x 4 x tI2CCLK Note: These
bits can be written only when
TIMOUTEN=0.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>TIDLE</name>
<description>Idle clock timeout detection Note: This
bit can be written only when
TIMOUTEN=0.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMOUTEN</name>
<description>Clock timeout enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEOUTB</name>
<description>Bus timeout B This field is used to
configure the cumulative clock extension timeout: In
master mode, the master cumulative clock low extend
time (tLOW:MEXT) is detected In slave mode, the slave
cumulative clock low extend time (tLOW:SEXT) is
detected tLOW:EXT= (TIMEOUTB+1) x 2048 x tI2CCLK
Note: These bits can be written only when
TEXTEN=0.</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>TEXTEN</name>
<description>Extended clock timeout
enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Access: No wait states</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>TXE</name>
<description>Transmit data register empty
(transmitters) This bit is set by hardware when the
I2C_TXDR register is empty. It is cleared when the
next data to be sent is written in the I2C_TXDR
register. This bit can be written to 1 by software in
order to flush the transmit data register I2C_TXDR.
Note: This bit is set by hardware when
PE=0.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXIS</name>
<description>Transmit interrupt status (transmitters)
This bit is set by hardware when the I2C_TXDR
register is empty and the data to be transmitted must
be written in the I2C_TXDR register. It is cleared
when the next data to be sent is written in the
I2C_TXDR register. This bit can be written to 1 by
software when NOSTRETCH=1 only, in order to generate
a TXIS event (interrupt if TXIE=1 or DMA request if
TXDMAEN=1). Note: This bit is cleared by hardware
when PE=0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXNE</name>
<description>Receive data register not empty
(receivers) This bit is set by hardware when the
received data is copied into the I2C_RXDR register,
and is ready to be read. It is cleared when I2C_RXDR
is read. Note: This bit is cleared by hardware when
PE=0.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ADDR</name>
<description>Address matched (slave mode) This bit is
set by hardware as soon as the received slave address
matched with one of the enabled slave addresses. It
is cleared by software by setting ADDRCF bit. Note:
This bit is cleared by hardware when
PE=0.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACKF</name>
<description>Not Acknowledge received flag This flag
is set by hardware when a NACK is received after a
byte transmission. It is cleared by software by
setting the NACKCF bit. Note: This bit is cleared by
hardware when PE=0.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STOPF</name>
<description>Stop detection flag This flag is set by
hardware when a Stop condition is detected on the bus
and the peripheral is involved in this transfer:
either as a master, provided that the STOP condition
is generated by the peripheral. or as a slave,
provided that the peripheral has been addressed
previously during this transfer. It is cleared by
software by setting the STOPCF bit. Note: This bit is
cleared by hardware when PE=0.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TC</name>
<description>Transfer Complete (master mode) This
flag is set by hardware when RELOAD=0, AUTOEND=0 and
NBYTES data have been transferred. It is cleared by
software when START bit or STOP bit is set. Note:
This bit is cleared by hardware when
PE=0.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TCR</name>
<description>Transfer Complete Reload This flag is
set by hardware when RELOAD=1 and NBYTES data have
been transferred. It is cleared by software when
NBYTES is written to a non-zero value. Note: This bit
is cleared by hardware when PE=0. This flag is only
for master mode, or for slave mode when the SBC bit
is set.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BERR</name>
<description>Bus error This flag is set by hardware
when a misplaced Start or Stop condition is detected
whereas the peripheral is involved in the transfer.
The flag is not set during the address phase in slave
mode. It is cleared by software by setting BERRCF
bit. Note: This bit is cleared by hardware when
PE=0.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARLO</name>
<description>Arbitration lost This flag is set by
hardware in case of arbitration loss. It is cleared
by software by setting the ARLOCF bit. Note: This bit
is cleared by hardware when PE=0.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVR</name>
<description>Overrun/Underrun (slave mode) This flag
is set by hardware in slave mode with NOSTRETCH=1,
when an overrun/underrun error occurs. It is cleared
by software by setting the OVRCF bit. Note: This bit
is cleared by hardware when PE=0.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PECERR</name>
<description>PEC Error in reception This flag is set
by hardware when the received PEC does not match with
the PEC register content. A NACK is automatically
sent after the wrong PEC reception. It is cleared by
software by setting the PECCF bit. Note: This bit is
cleared by hardware when PE=0. If the SMBus feature
is not supported, this bit is reserved and forced by
hardware to 0. Please refer to Section25.3: I2C
implementation.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Timeout or tLOW detection flag This flag
is set by hardware when a timeout or extended clock
timeout occurred. It is cleared by software by
setting the TIMEOUTCF bit. Note: This bit is cleared
by hardware when PE=0. If the SMBus feature is not
supported, this bit is reserved and forced by
hardware to 0. Please refer to Section25.3: I2C
implementation.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALERT</name>
<description>SMBus alert This flag is set by hardware
when SMBHEN=1 (SMBus host configuration), ALERTEN=1
and a SMBALERT event (falling edge) is detected on
SMBA pin. It is cleared by software by setting the
ALERTCF bit. Note: This bit is cleared by hardware
when PE=0. If the SMBus feature is not supported,
this bit is reserved and forced by hardware to 0.
Please refer to Section25.3: I2C
implementation.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY</name>
<description>Bus busy This flag indicates that a
communication is in progress on the bus. It is set by
hardware when a START condition is detected. It is
cleared by hardware when a Stop condition is
detected, or when PE=0.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIR</name>
<description>Transfer direction (Slave mode) This
flag is updated when an address match event occurs
(ADDR=1).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ADDCODE</name>
<description>Address match code (Slave mode) These
bits are updated with the received address when an
address match event occurs (ADDR = 1). In the case of
a 10-bit address, ADDCODE provides the 10-bit header
followed by the 2 MSBs of the address.</description>
<bitOffset>17</bitOffset>
<bitWidth>7</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Access: No wait states</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDRCF</name>
<description>Address matched flag clear Writing 1 to
this bit clears the ADDR flag in the I2C_ISR
register. Writing 1 to this bit also clears the START
bit in the I2C_CR2 register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NACKCF</name>
<description>Not Acknowledge flag clear Writing 1 to
this bit clears the ACKF flag in I2C_ISR
register.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOPCF</name>
<description>Stop detection flag clear Writing 1 to
this bit clears the STOPF flag in the I2C_ISR
register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BERRCF</name>
<description>Bus error flag clear Writing 1 to this
bit clears the BERRF flag in the I2C_ISR
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARLOCF</name>
<description>Arbitration Lost flag clear Writing 1 to
this bit clears the ARLO flag in the I2C_ISR
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRCF</name>
<description>Overrun/Underrun flag clear Writing 1 to
this bit clears the OVR flag in the I2C_ISR
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PECCF</name>
<description>PEC Error flag clear Writing 1 to this
bit clears the PECERR flag in the I2C_ISR register.
Note: If the SMBus feature is not supported, this bit
is reserved and forced by hardware to 0. Please refer
to Section25.3: I2C implementation.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMOUTCF</name>
<description>Timeout detection flag clear Writing 1
to this bit clears the TIMEOUT flag in the I2C_ISR
register. Note: If the SMBus feature is not
supported, this bit is reserved and forced by
hardware to 0. Please refer to Section25.3: I2C
implementation.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALERTCF</name>
<description>Alert flag clear Writing 1 to this bit
clears the ALERT flag in the I2C_ISR register. Note:
If the SMBus feature is not supported, this bit is
reserved and forced by hardware to 0. Please refer to
Section25.3: I2C implementation.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PECR</name>
<displayName>PECR</displayName>
<description>Access: No wait states</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PEC</name>
<description>Packet error checking register This
field contains the internal PEC when PECEN=1. The PEC
is cleared by hardware when PE=0.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXDR</name>
<displayName>RXDR</displayName>
<description>Access: No wait states</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDATA</name>
<description>8-bit receive data Data byte received
from the I2C bus.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXDR</name>
<displayName>TXDR</displayName>
<description>Access: No wait states</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXDATA</name>
<description>8-bit transmit data Data byte to be
transmitted to the I2C bus. Note: These bits can be
written only when TXE=1.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="I2C1">
<name>I2C2</name>
<baseAddress>0x40005800</baseAddress>
<interrupt>
<name>I2C2_EV</name>
<description>I2C2 event interrupt</description>
<value>33</value>
</interrupt>
<interrupt>
<name>I2C2_ER</name>
<description>I2C2 error interrupt</description>
<value>34</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="I2C1">
<name>I2C3</name>
<baseAddress>0x40005C00</baseAddress>
<interrupt>
<name>I2C3_EV</name>
<description>I2C3 event interrupt</description>
<value>72</value>
</interrupt>
<interrupt>
<name>I2C3_ER</name>
<description>I2C3 error interrupt</description>
<value>73</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="I2C1">
<name>I2C4</name>
<baseAddress>0x58001C00</baseAddress>
<interrupt>
<name>I2C4_EV</name>
<description>I2C4 event interrupt</description>
<value>95</value>
</interrupt>
<interrupt>
<name>I2C4_ER</name>
<description>I2C4 error interrupt</description>
<value>96</value>
</interrupt>
</peripheral>
<peripheral>
<name>GPIOA</name>
<description>GPIO</description>
<groupName>GPIO</groupName>
<baseAddress>0x58020000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MODER</name>
<displayName>MODER</displayName>
<description>GPIO port mode register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xABFFFFFF</resetValue>
<fields>
<field>
<name>MODE0</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE1</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE2</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE3</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE4</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE5</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE6</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE7</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE8</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE9</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE10</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE11</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE12</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE13</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE14</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MODE15</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O mode.</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTYPER</name>
<displayName>OTYPER</displayName>
<description>GPIO port output type register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OT0</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT1</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT2</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT3</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT4</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT5</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT6</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT7</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT8</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT9</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT10</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT11</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT12</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT13</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT14</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OT15</name>
<description>Port x configuration bits (y = 0..15)
These bits are written by software to configure the
I/O output type.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OSPEEDR</name>
<displayName>OSPEEDR</displayName>
<description>GPIO port output speed
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0C000000</resetValue>
<fields>
<field>
<name>OSPEED0</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED1</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED2</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED3</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED4</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED5</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED6</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED7</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED8</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED9</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED10</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED11</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED12</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED13</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED14</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSPEED15</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O output speed. Note: Refer to the
device datasheet for the frequency specifications and
the power supply and load conditions for each
speed.</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>PUPDR</name>
<displayName>PUPDR</displayName>
<description>GPIO port pull-up/pull-down
register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x12100000</resetValue>
<fields>
<field>
<name>PUPD0</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD1</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD2</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD3</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD4</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD5</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD6</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD7</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD8</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD9</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD10</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD11</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD12</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD13</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD14</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PUPD15</name>
<description>[1:0]: Port x configuration bits (y =
0..15) These bits are written by software to
configure the I/O pull-up or pull-down</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<displayName>IDR</displayName>
<description>GPIO port input data register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ID0</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID1</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID2</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID3</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID4</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID5</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID6</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID7</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID8</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID9</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID10</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID11</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID12</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID13</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID14</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID15</name>
<description>Port input data bit (y = 0..15) These
bits are read-only. They contain the input value of
the corresponding I/O port.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<displayName>ODR</displayName>
<description>GPIO port output data register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OD0</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD1</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD2</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD3</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD4</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD5</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD6</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD7</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD8</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD9</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD10</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD11</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD12</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD13</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD14</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OD15</name>
<description>Port output data bit These bits can be
read and written by software. Note: For atomic bit
set/reset, the OD bits can be individually set and/or
reset by writing to the GPIOx_BSRR or GPIOx_BRR
registers (x = A..F).</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BSRR</name>
<displayName>BSRR</displayName>
<description>GPIO port bit set/reset
register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BS0</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS1</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS2</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS3</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS4</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS5</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS6</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS7</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS8</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS9</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS10</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS11</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS12</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS13</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS14</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BS15</name>
<description>Port x set bit y (y= 0..15) These bits
are write-only. A read to these bits returns the
value 0x0000.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR0</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR1</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR2</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR3</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR4</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR5</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR6</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR7</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR8</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR9</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR10</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR11</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR12</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR13</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR14</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BR15</name>
<description>Port x reset bit y (y = 0..15) These
bits are write-only. A read to these bits returns the
value 0x0000. Note: If both BSx and BRx are set, BSx
has priority.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LCKR</name>
<displayName>LCKR</displayName>
<description>This register is used to lock the
configuration of the port bits when a correct write
sequence is applied to bit 16 (LCKK). The value of bits
[15:0] is used to lock the configuration of the GPIO.
During the write sequence, the value of LCKR[15:0] must
not change. When the LOCK sequence has been applied on a
port bit, the value of this port bit can no longer be
modified until the next MCU reset or peripheral reset.A
specific write sequence is used to write to the
GPIOx_LCKR register. Only word access (32-bit long) is
allowed during this locking sequence.Each lock bit
freezes a specific configuration register (control and
alternate function registers).</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LCK0</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK1</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK2</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK3</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK4</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK5</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK6</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK7</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK8</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK9</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK10</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK11</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK12</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK13</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK14</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCK15</name>
<description>Port x lock bit y (y= 0..15) These bits
are read/write but can only be written when the LCKK
bit is 0.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCKK</name>
<description>Lock key This bit can be read any time.
It can only be modified using the lock key write
sequence. LOCK key write sequence: WR LCKR[16] = 1 +
LCKR[15:0] WR LCKR[16] = 0 + LCKR[15:0] WR LCKR[16] =
1 + LCKR[15:0] RD LCKR RD LCKR[16] = 1 (this read
operation is optional but it confirms that the lock
is active) Note: During the LOCK key write sequence,
the value of LCK[15:0] must not change. Any error in
the lock sequence aborts the lock. After the first
lock sequence on any bit of the port, any read access
on the LCKK bit will return 1 until the next MCU
reset or peripheral reset.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AFRL</name>
<displayName>AFRL</displayName>
<description>GPIO alternate function low
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AFSEL0</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL1</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL2</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL3</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL4</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL5</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL6</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL7</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 0..7) These bits are written by
software to configure alternate function I/Os AFSELy
selection:</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AFRH</name>
<displayName>AFRH</displayName>
<description>GPIO alternate function high
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AFSEL8</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL9</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL10</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL11</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL12</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL13</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL14</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AFSEL15</name>
<description>[3:0]: Alternate function selection for
port x pin y (y = 8..15) These bits are written by
software to configure alternate function
I/Os</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOB</name>
<baseAddress>0x58020400</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOC</name>
<baseAddress>0x58020800</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOD</name>
<baseAddress>0x58020C00</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOE</name>
<baseAddress>0x58021000</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOF</name>
<baseAddress>0x58021400</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOG</name>
<baseAddress>0x58021800</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOH</name>
<baseAddress>0x58021C00</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOI</name>
<baseAddress>0x58022000</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOJ</name>
<baseAddress>0x58022400</baseAddress>
</peripheral>
<peripheral derivedFrom="GPIOA">
<name>GPIOK</name>
<baseAddress>0x58022800</baseAddress>
</peripheral>
<peripheral>
<name>JPEG</name>
<description>JPEG</description>
<groupName>JPEG</groupName>
<baseAddress>0x52003000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>JPEG</name>
<description>JPEG global interrupt</description>
<value>121</value>
</interrupt>
<registers>
<register>
<name>CONFR0</name>
<displayName>CONFR0</displayName>
<description>JPEG codec control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>START</name>
<description>Start This bit start or stop the
encoding or decoding process. Read this register
always return 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFR1</name>
<displayName>CONFR1</displayName>
<description>JPEG codec configuration register
1</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NF</name>
<description>Number of color components This field
defines the number of color components minus
1.</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DE</name>
<description>Decoding Enable This bit selects the
coding or decoding process</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLORSPACE</name>
<description>Color Space This filed defines the
number of quantization tables minus 1 to insert in
the output stream.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NS</name>
<description>Number of components for Scan This field
defines the number of components minus 1 for scan
header marker segment.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>HDR</name>
<description>Header Processing This bit enable the
header processing (generation/parsing).</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>YSIZE</name>
<description>Y Size This field defines the number of
lines in source image.</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFR2</name>
<displayName>CONFR2</displayName>
<description>JPEG codec configuration register
2</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NMCU</name>
<description>Number of MCU For encoding: this field
defines the number of MCU units minus 1 to encode.
For decoding: this field indicates the number of
complete MCU units minus 1 to be decoded (this field
is updated after the JPEG header parsing). If the
decoded image size has not a X or Y size multiple of
8 or 16 (depending on the sub-sampling process), the
resulting incomplete or empty MCU must be added to
this value to get the total number of MCU
generated.</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFR3</name>
<displayName>CONFR3</displayName>
<description>JPEG codec configuration register
3</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XSIZE</name>
<description>X size This field defines the number of
pixels per line.</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFRN1</name>
<displayName>CONFRN1</displayName>
<description>JPEG codec configuration register
4-7</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HD</name>
<description>Huffman DC Selects the Huffman table for
encoding the DC coefficients.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HA</name>
<description>Huffman AC Selects the Huffman table for
encoding the AC coefficients.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QT</name>
<description>Quantization Table Selects quantization
table associated with a color
component.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NB</name>
<description>Number of Block Number of data units
minus 1 that belong to a particular color in the
MCU.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VSF</name>
<description>Vertical Sampling Factor Vertical
sampling factor for component i.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HSF</name>
<description>Horizontal Sampling Factor Horizontal
sampling factor for component i.</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFRN2</name>
<displayName>CONFRN2</displayName>
<description>JPEG codec configuration register
4-7</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HD</name>
<description>Huffman DC Selects the Huffman table for
encoding the DC coefficients.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HA</name>
<description>Huffman AC Selects the Huffman table for
encoding the AC coefficients.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QT</name>
<description>Quantization Table Selects quantization
table associated with a color
component.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NB</name>
<description>Number of Block Number of data units
minus 1 that belong to a particular color in the
MCU.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VSF</name>
<description>Vertical Sampling Factor Vertical
sampling factor for component i.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HSF</name>
<description>Horizontal Sampling Factor Horizontal
sampling factor for component i.</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFRN3</name>
<displayName>CONFRN3</displayName>
<description>JPEG codec configuration register
4-7</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HD</name>
<description>Huffman DC Selects the Huffman table for
encoding the DC coefficients.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HA</name>
<description>Huffman AC Selects the Huffman table for
encoding the AC coefficients.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QT</name>
<description>Quantization Table Selects quantization
table associated with a color
component.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NB</name>
<description>Number of Block Number of data units
minus 1 that belong to a particular color in the
MCU.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VSF</name>
<description>Vertical Sampling Factor Vertical
sampling factor for component i.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HSF</name>
<description>Horizontal Sampling Factor Horizontal
sampling factor for component i.</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFRN4</name>
<displayName>CONFRN4</displayName>
<description>JPEG codec configuration register
4-7</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HD</name>
<description>Huffman DC Selects the Huffman table for
encoding the DC coefficients.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HA</name>
<description>Huffman AC Selects the Huffman table for
encoding the AC coefficients.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QT</name>
<description>Quantization Table Selects quantization
table associated with a color
component.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NB</name>
<description>Number of Block Number of data units
minus 1 that belong to a particular color in the
MCU.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VSF</name>
<description>Vertical Sampling Factor Vertical
sampling factor for component i.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HSF</name>
<description>Horizontal Sampling Factor Horizontal
sampling factor for component i.</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>JPEG control register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JCEN</name>
<description>JPEG Core Enable Enable the JPEG codec
Core.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IFTIE</name>
<description>Input FIFO Threshold Interrupt Enable
This bit enables the interrupt generation when input
FIFO reach the threshold.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IFNFIE</name>
<description>Input FIFO Not Full Interrupt Enable
This bit enables the interrupt generation when input
FIFO is not empty.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFTIE</name>
<description>Output FIFO Threshold Interrupt Enable
This bit enables the interrupt generation when output
FIFO reach the threshold.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFNEIE</name>
<description>Output FIFO Not Empty Interrupt Enable
This bit enables the interrupt generation when output
FIFO is not empty.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOCIE</name>
<description>End of Conversion Interrupt Enable This
bit enables the interrupt generation on the end of
conversion.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPDIE</name>
<description>Header Parsing Done Interrupt Enable
This bit enables the interrupt generation on the
Header Parsing Operation.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMAEN</name>
<description>Input DMA Enable Enable the DMA request
generation for the input FIFO.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ODMAEN</name>
<description>Output DMA Enable Enable the DMA request
generation for the output FIFO.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IFF</name>
<description>Input FIFO Flush This bit flush the
input FIFO. This bit is always read as
0.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFF</name>
<description>Output FIFO Flush This bit flush the
output FIFO. This bit is always read as
0.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>JPEG status register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000006</resetValue>
<fields>
<field>
<name>IFTF</name>
<description>Input FIFO Threshold Flag This bit is
set when the input FIFO is not full and is bellow its
threshold.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IFNFF</name>
<description>Input FIFO Not Full Flag This bit is set
when the input FIFO is not full (a data can be
written).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFTF</name>
<description>Output FIFO Threshold Flag This bit is
set when the output FIFO is not empty and has reach
its threshold.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFNEF</name>
<description>Output FIFO Not Empty Flag This bit is
set when the output FIFO is not empty (a data is
available).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOCF</name>
<description>End of Conversion Flag This bit is set
when the JPEG codec core has finished the encoding or
the decoding process and than last data has been sent
to the output FIFO.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPDF</name>
<description>Header Parsing Done Flag This bit is set
in decode mode when the JPEG codec has finished the
parsing of the headers and the internal registers
have been updated.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COF</name>
<description>Codec Operation Flag This bit is set
when when a JPEG codec operation is on going
(encoding or decoding).</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFR</name>
<displayName>CFR</displayName>
<description>JPEG clear flag register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEOCF</name>
<description>Clear End of Conversion Flag Writing 1
clears the End of Conversion Flag of the JPEG Status
Register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHPDF</name>
<description>Clear Header Parsing Done Flag Writing 1
clears the Header Parsing Done Flag of the JPEG
Status Register.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIR</name>
<displayName>DIR</displayName>
<description>JPEG data input register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATAIN</name>
<description>Data Input FIFO Input FIFO data
register.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOR</name>
<displayName>DOR</displayName>
<description>JPEG data output register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATAOUT</name>
<description>Data Output FIFO Output FIFO data
register.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MDMA</name>
<description>MDMA</description>
<groupName>MDMA</groupName>
<baseAddress>0x52000000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x1000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>MDMA</name>
<description>MDMA</description>
<value>122</value>
</interrupt>
<registers>
<register>
<name>MDMA_GISR0</name>
<displayName>MDMA_GISR0</displayName>
<description>MDMA Global Interrupt/Status
Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GIF0</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF1</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF2</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF3</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF4</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF5</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF6</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF7</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF8</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF9</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF10</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF11</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF12</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF13</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF14</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GIF15</name>
<description>Channel x global interrupt flag (x=...)
This bit is set and reset by hardware. It is a
logical OR of all the Channel x interrupt flags
(CTCIFx, BTIFx, BRTIFx, TEIFx) which are enabled in
the interrupt mask register (CTCIEx, BTIEx, BRTIEx,
TEIEx)</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0ISR</name>
<displayName>MDMA_C0ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF0</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF0</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF0</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF0</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF0</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA0</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0IFCR</name>
<displayName>MDMA_C0IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF0</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF0</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF0</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF0</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF0</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0ESR</name>
<displayName>MDMA_C0ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0CR</name>
<displayName>MDMA_C0CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C0TCR</name>
<displayName>MDMA_C0TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0BNDTR</name>
<displayName>MDMA_C0BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0SAR</name>
<displayName>MDMA_C0SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0DAR</name>
<displayName>MDMA_C0DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0BRUR</name>
<displayName>MDMA_C0BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0LAR</name>
<displayName>MDMA_C0LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0TBR</name>
<displayName>MDMA_C0TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0MAR</name>
<displayName>MDMA_C0MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C0MDR</name>
<displayName>MDMA_C0MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1ISR</name>
<displayName>MDMA_C1ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF1</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF1</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF1</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF1</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF1</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA1</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1IFCR</name>
<displayName>MDMA_C1IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF1</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF1</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF1</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF1</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF1</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1ESR</name>
<displayName>MDMA_C1ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1CR</name>
<displayName>MDMA_C1CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C1TCR</name>
<displayName>MDMA_C1TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1BNDTR</name>
<displayName>MDMA_C1BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1SAR</name>
<displayName>MDMA_C1SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1DAR</name>
<displayName>MDMA_C1DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1BRUR</name>
<displayName>MDMA_C1BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1LAR</name>
<displayName>MDMA_C1LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1TBR</name>
<displayName>MDMA_C1TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1MAR</name>
<displayName>MDMA_C1MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C1MDR</name>
<displayName>MDMA_C1MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2ISR</name>
<displayName>MDMA_C2ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF2</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF2</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF2</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF2</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF2</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA2</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2IFCR</name>
<displayName>MDMA_C2IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF2</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF2</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF2</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF2</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF2</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2ESR</name>
<displayName>MDMA_C2ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2CR</name>
<displayName>MDMA_C2CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C2TCR</name>
<displayName>MDMA_C2TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2BNDTR</name>
<displayName>MDMA_C2BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2SAR</name>
<displayName>MDMA_C2SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2DAR</name>
<displayName>MDMA_C2DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2BRUR</name>
<displayName>MDMA_C2BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0xE0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2LAR</name>
<displayName>MDMA_C2LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0xE4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2TBR</name>
<displayName>MDMA_C2TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0xE8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2MAR</name>
<displayName>MDMA_C2MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0xF0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C2MDR</name>
<displayName>MDMA_C2MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0xF4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3ISR</name>
<displayName>MDMA_C3ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF3</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF3</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF3</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF3</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF3</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA3</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3IFCR</name>
<displayName>MDMA_C3IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF3</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF3</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF3</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF3</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF3</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3ESR</name>
<displayName>MDMA_C3ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3CR</name>
<displayName>MDMA_C3CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C3TCR</name>
<displayName>MDMA_C3TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3BNDTR</name>
<displayName>MDMA_C3BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3SAR</name>
<displayName>MDMA_C3SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3DAR</name>
<displayName>MDMA_C3DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3BRUR</name>
<displayName>MDMA_C3BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3LAR</name>
<displayName>MDMA_C3LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x124</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3TBR</name>
<displayName>MDMA_C3TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x128</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3MAR</name>
<displayName>MDMA_C3MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C3MDR</name>
<displayName>MDMA_C3MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4ISR</name>
<displayName>MDMA_C4ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF4</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF4</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF4</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF4</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF4</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA4</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4IFCR</name>
<displayName>MDMA_C4IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF4</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF4</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF4</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF4</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF4</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4ESR</name>
<displayName>MDMA_C4ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x148</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4CR</name>
<displayName>MDMA_C4CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x14C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C4TCR</name>
<displayName>MDMA_C4TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x150</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4BNDTR</name>
<displayName>MDMA_C4BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x154</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4SAR</name>
<displayName>MDMA_C4SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x158</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4DAR</name>
<displayName>MDMA_C4DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x15C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4BRUR</name>
<displayName>MDMA_C4BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x160</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4LAR</name>
<displayName>MDMA_C4LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x164</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4TBR</name>
<displayName>MDMA_C4TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x168</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4MAR</name>
<displayName>MDMA_C4MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x170</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C4MDR</name>
<displayName>MDMA_C4MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x174</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5ISR</name>
<displayName>MDMA_C5ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x180</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF5</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF5</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF5</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF5</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF5</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA5</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5IFCR</name>
<displayName>MDMA_C5IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x184</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF5</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF5</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF5</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF5</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF5</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5ESR</name>
<displayName>MDMA_C5ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x188</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5CR</name>
<displayName>MDMA_C5CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x18C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C5TCR</name>
<displayName>MDMA_C5TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x190</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5BNDTR</name>
<displayName>MDMA_C5BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x194</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5SAR</name>
<displayName>MDMA_C5SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x198</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5DAR</name>
<displayName>MDMA_C5DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x19C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5BRUR</name>
<displayName>MDMA_C5BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x1A0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5LAR</name>
<displayName>MDMA_C5LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x1A4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5TBR</name>
<displayName>MDMA_C5TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x1A8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5MAR</name>
<displayName>MDMA_C5MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x1B0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C5MDR</name>
<displayName>MDMA_C5MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x1B4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6ISR</name>
<displayName>MDMA_C6ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x1C0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF6</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF6</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF6</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF6</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF6</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA6</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6IFCR</name>
<displayName>MDMA_C6IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x1C4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF6</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF6</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF6</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF6</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF6</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6ESR</name>
<displayName>MDMA_C6ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x1C8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6CR</name>
<displayName>MDMA_C6CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x1CC</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C6TCR</name>
<displayName>MDMA_C6TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x1D0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6BNDTR</name>
<displayName>MDMA_C6BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x1D4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6SAR</name>
<displayName>MDMA_C6SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x1D8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6DAR</name>
<displayName>MDMA_C6DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x1DC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6BRUR</name>
<displayName>MDMA_C6BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x1E0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6LAR</name>
<displayName>MDMA_C6LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x1E4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6TBR</name>
<displayName>MDMA_C6TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x1E8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6MAR</name>
<displayName>MDMA_C6MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x1F0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C6MDR</name>
<displayName>MDMA_C6MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x1F4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7ISR</name>
<displayName>MDMA_C7ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x200</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF7</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF7</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF7</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF7</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF7</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA7</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7IFCR</name>
<displayName>MDMA_C7IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x204</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF7</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF7</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF7</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF7</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF7</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7ESR</name>
<displayName>MDMA_C7ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x208</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7CR</name>
<displayName>MDMA_C7CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x20C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C7TCR</name>
<displayName>MDMA_C7TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x210</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7BNDTR</name>
<displayName>MDMA_C7BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x214</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7SAR</name>
<displayName>MDMA_C7SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x218</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7DAR</name>
<displayName>MDMA_C7DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x21C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7BRUR</name>
<displayName>MDMA_C7BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x220</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7LAR</name>
<displayName>MDMA_C7LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x224</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7TBR</name>
<displayName>MDMA_C7TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x228</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7MAR</name>
<displayName>MDMA_C7MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x230</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C7MDR</name>
<displayName>MDMA_C7MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x234</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8ISR</name>
<displayName>MDMA_C8ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x240</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF8</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF8</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF8</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF8</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF8</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA8</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8IFCR</name>
<displayName>MDMA_C8IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x244</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF8</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF8</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF8</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF8</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF8</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8ESR</name>
<displayName>MDMA_C8ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x248</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8CR</name>
<displayName>MDMA_C8CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x24C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C8TCR</name>
<displayName>MDMA_C8TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x250</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8BNDTR</name>
<displayName>MDMA_C8BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x254</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8SAR</name>
<displayName>MDMA_C8SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x258</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8DAR</name>
<displayName>MDMA_C8DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x25C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8BRUR</name>
<displayName>MDMA_C8BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x260</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8LAR</name>
<displayName>MDMA_C8LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x264</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8TBR</name>
<displayName>MDMA_C8TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x268</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8MAR</name>
<displayName>MDMA_C8MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x270</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C8MDR</name>
<displayName>MDMA_C8MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x274</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9ISR</name>
<displayName>MDMA_C9ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x280</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF9</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF9</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF9</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF9</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF9</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA9</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9IFCR</name>
<displayName>MDMA_C9IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x284</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF9</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF9</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF9</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF9</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF9</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9ESR</name>
<displayName>MDMA_C9ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x288</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9CR</name>
<displayName>MDMA_C9CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x28C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C9TCR</name>
<displayName>MDMA_C9TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x290</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9BNDTR</name>
<displayName>MDMA_C9BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x294</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9SAR</name>
<displayName>MDMA_C9SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x298</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9DAR</name>
<displayName>MDMA_C9DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x29C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9BRUR</name>
<displayName>MDMA_C9BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x2A0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9LAR</name>
<displayName>MDMA_C9LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x2A4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9TBR</name>
<displayName>MDMA_C9TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x2A8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9MAR</name>
<displayName>MDMA_C9MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x2B0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C9MDR</name>
<displayName>MDMA_C9MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x2B4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10ISR</name>
<displayName>MDMA_C10ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x2C0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF10</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF10</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF10</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF10</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF10</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA10</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10IFCR</name>
<displayName>MDMA_C10IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x2C4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF10</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF10</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF10</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF10</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF10</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10ESR</name>
<displayName>MDMA_C10ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x2C8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10CR</name>
<displayName>MDMA_C10CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x2CC</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C10TCR</name>
<displayName>MDMA_C10TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x2D0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10BNDTR</name>
<displayName>MDMA_C10BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x2D4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10SAR</name>
<displayName>MDMA_C10SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x2D8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10DAR</name>
<displayName>MDMA_C10DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x2DC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10BRUR</name>
<displayName>MDMA_C10BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x2E0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10LAR</name>
<displayName>MDMA_C10LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x2E4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10TBR</name>
<displayName>MDMA_C10TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x2E8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10MAR</name>
<displayName>MDMA_C10MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x2F0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C10MDR</name>
<displayName>MDMA_C10MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x2F4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11ISR</name>
<displayName>MDMA_C11ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x300</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF11</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF11</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF11</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF11</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF11</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA11</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11IFCR</name>
<displayName>MDMA_C11IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x304</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF11</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF11</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF11</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF11</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF11</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11ESR</name>
<displayName>MDMA_C11ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x308</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11CR</name>
<displayName>MDMA_C11CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x30C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C11TCR</name>
<displayName>MDMA_C11TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x310</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11BNDTR</name>
<displayName>MDMA_C11BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x314</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11SAR</name>
<displayName>MDMA_C11SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x318</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11DAR</name>
<displayName>MDMA_C11DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x31C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11BRUR</name>
<displayName>MDMA_C11BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x320</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11LAR</name>
<displayName>MDMA_C11LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x324</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11TBR</name>
<displayName>MDMA_C11TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x328</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11MAR</name>
<displayName>MDMA_C11MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x330</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C11MDR</name>
<displayName>MDMA_C11MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x334</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12ISR</name>
<displayName>MDMA_C12ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x340</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF12</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF12</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF12</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF12</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF12</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA12</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12IFCR</name>
<displayName>MDMA_C12IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x344</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF12</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF12</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF12</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF12</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF12</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12ESR</name>
<displayName>MDMA_C12ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x348</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12CR</name>
<displayName>MDMA_C12CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x34C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C12TCR</name>
<displayName>MDMA_C12TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x350</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12BNDTR</name>
<displayName>MDMA_C12BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x354</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12SAR</name>
<displayName>MDMA_C12SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x358</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12DAR</name>
<displayName>MDMA_C12DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x35C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12BRUR</name>
<displayName>MDMA_C12BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x360</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12LAR</name>
<displayName>MDMA_C12LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x364</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12TBR</name>
<displayName>MDMA_C12TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x368</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12MAR</name>
<displayName>MDMA_C12MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x370</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C12MDR</name>
<displayName>MDMA_C12MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x374</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13ISR</name>
<displayName>MDMA_C13ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x380</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF13</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF13</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF13</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF13</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF13</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA13</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13IFCR</name>
<displayName>MDMA_C13IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x384</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF13</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF13</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF13</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF13</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF13</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13ESR</name>
<displayName>MDMA_C13ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x388</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13CR</name>
<displayName>MDMA_C13CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x38C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C13TCR</name>
<displayName>MDMA_C13TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x390</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13BNDTR</name>
<displayName>MDMA_C13BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x394</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13SAR</name>
<displayName>MDMA_C13SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x398</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13DAR</name>
<displayName>MDMA_C13DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x39C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13BRUR</name>
<displayName>MDMA_C13BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x3A0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13LAR</name>
<displayName>MDMA_C13LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x3A4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13TBR</name>
<displayName>MDMA_C13TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x3A8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13MAR</name>
<displayName>MDMA_C13MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x3B0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C13MDR</name>
<displayName>MDMA_C13MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x3B4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14ISR</name>
<displayName>MDMA_C14ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x3C0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF14</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF14</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF14</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF14</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF14</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA14</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14IFCR</name>
<displayName>MDMA_C14IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x3C4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF14</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF14</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF14</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF14</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF14</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14ESR</name>
<displayName>MDMA_C14ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x3C8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14CR</name>
<displayName>MDMA_C14CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x3CC</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C14TCR</name>
<displayName>MDMA_C14TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x3D0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14BNDTR</name>
<displayName>MDMA_C14BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x3D4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14SAR</name>
<displayName>MDMA_C14SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x3D8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14DAR</name>
<displayName>MDMA_C14DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x3DC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14BRUR</name>
<displayName>MDMA_C14BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x3E0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14LAR</name>
<displayName>MDMA_C14LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x3E4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14TBR</name>
<displayName>MDMA_C14TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x3E8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14MAR</name>
<displayName>MDMA_C14MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x3F0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C14MDR</name>
<displayName>MDMA_C14MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x3F4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15ISR</name>
<displayName>MDMA_C15ISR</displayName>
<description>MDMA channel x interrupt/status
register</description>
<addressOffset>0x400</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEIF15</name>
<description>Channel x transfer error interrupt flag
This bit is set by hardware. It is cleared by
software writing 1 to the corresponding bit in the
DMA_IFCRy register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF15</name>
<description>Channel x Channel Transfer Complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register. CTC is set when the
last block was transferred and the channel has been
automatically disabled. CTC is also set when the
channel is suspended, as a result of writing EN bit
to 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRTIF15</name>
<description>Channel x block repeat transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTIF15</name>
<description>Channel x block transfer complete
interrupt flag This bit is set by hardware. It is
cleared by software writing 1 to the corresponding
bit in the DMA_IFCRy register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF15</name>
<description>channel x buffer transfer
complete</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRQA15</name>
<description>channel x request active
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15IFCR</name>
<displayName>MDMA_C15IFCR</displayName>
<description>MDMA channel x interrupt flag clear
register</description>
<addressOffset>0x404</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEIF15</name>
<description>Channel x clear transfer error interrupt
flag Writing a 1 into this bit clears TEIFx in the
MDMA_ISRy register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTCIF15</name>
<description>Clear Channel transfer complete
interrupt flag for channel x Writing a 1 into this
bit clears CTCIFx in the MDMA_ISRy
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBRTIF15</name>
<description>Channel x clear block repeat transfer
complete interrupt flag Writing a 1 into this bit
clears BRTIFx in the MDMA_ISRy register</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBTIF15</name>
<description>Channel x Clear block transfer complete
interrupt flag Writing a 1 into this bit clears BTIFx
in the MDMA_ISRy register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLTCIF15</name>
<description>CLear buffer Transfer Complete Interrupt
Flag for channel x Writing a 1 into this bit clears
TCIFx in the MDMA_ISRy register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15ESR</name>
<displayName>MDMA_C15ESR</displayName>
<description>MDMA Channel x error status
register</description>
<addressOffset>0x408</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEA</name>
<description>Transfer Error Address These bits are
set and cleared by HW, in case of an MDMA data
transfer error. It is used in conjunction with TED.
This field indicates the 7 LSBits of the address
which generated a transfer/access error. It may be
used by SW to retrieve the failing address, by adding
this value (truncated to the buffer transfer length
size) to the current SAR/DAR value. Note: The SAR/DAR
current value doesnt reflect this last address due to
the FIFO management system. The SAR/DAR are only
updated at the end of a (buffer) transfer (of TLEN+1
bytes). Note: It is not set in case of a link data
error.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TED</name>
<description>Transfer Error Direction These bit is
set and cleared by HW, in case of an MDMA data
transfer error.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TELD</name>
<description>Transfer Error Link Data These bit is
set by HW, in case of a transfer error while reading
the block link data structure. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEMD</name>
<description>Transfer Error Mask Data These bit is
set by HW, in case of a transfer error while writing
the Mask Data. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASE</name>
<description>Address/Size Error These bit is set by
HW, when the programmed address is not aligned with
the data size. TED will indicate whether the problem
is on the source or destination. It is cleared by
software writing 1 to the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>Block Size Error These bit is set by HW,
when the block size is not an integer multiple of the
data size either for source or destination. TED will
indicate whether the problem is on the source or
destination. It is cleared by software writing 1 to
the CTEIFx bit in the DMA_IFCRy
register.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15CR</name>
<displayName>MDMA_C15CR</displayName>
<description>This register is used to control the
concerned channel.</description>
<addressOffset>0x40C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>channel enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTCIE</name>
<description>Channel Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRTIE</name>
<description>Block Repeat transfer interrupt enable
This bit is set and cleared by
software.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BTIE</name>
<description>Block Transfer interrupt enable This bit
is set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCIE</name>
<description>buffer Transfer Complete interrupt
enable This bit is set and cleared by
software.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PL</name>
<description>Priority level These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>byte Endianness exchange</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEX</name>
<description>Half word Endianes
exchange</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WEX</name>
<description>Word Endianness exchange</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWRQ</name>
<description>SW ReQuest Writing a 1 into this bit
sets the CRQAx in MDMA_ISRy register, activating the
request on Channel x Note: Either the whole CxCR
register or the 8-bit/16-bit register @ Address
offset: 0x4E + 0x40 chn may be used for SWRQ
activation. In case of a SW request, acknowledge is
not generated (neither HW signal, nor CxMAR write
access).</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDMA_C15TCR</name>
<displayName>MDMA_C15TCR</displayName>
<description>This register is used to configure the
concerned channel.</description>
<addressOffset>0x410</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SINC</name>
<description>Source increment mode These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0 Note: When source is
AHB (SBUS=1), SINC = 00 is forbidden. In Linked List
Mode, at the end of a block (single or last block in
repeated block transfer mode), this register will be
loaded from memory (from address given by current
LAR[31:0] + 0x00).</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINC</name>
<description>Destination increment mode These bits
are set and cleared by software. These bits are
protected and can be written only if EN is 0 Note:
When destination is AHB (DBUS=1), DINC = 00 is
forbidden.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SSIZE</name>
<description>Source data size These bits are set and
cleared by software. These bits are protected and can
be written only if EN is 0 Note: If a value of 11 is
programmed for the TCM access/AHB port, a transfer
error will occur (TEIF bit set) If SINCOS &lt;
SSIZE and SINC &#8800; 00, the result will be
unpredictable. Note: SSIZE = 11 (double-word) is
forbidden when source is TCM/AHB bus
(SBUS=1).</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Destination data size These bits are set
and cleared by software. These bits are protected and
can be written only if EN is 0. Note: If a value of
11 is programmed for the TCM access/AHB port, a
transfer error will occur (TEIF bit set) If DINCOS
&lt; DSIZE and DINC &#8800; 00, the result
will be unpredictable. Note: DSIZE = 11 (double-word)
is forbidden when destination is TCM/AHB bus
(DBUS=1).</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SINCOS</name>
<description>source increment offset
size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DINCOS</name>
<description>Destination increment
offset</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SBURST</name>
<description>source burst transfer
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBURST</name>
<description>Destination burst transfer
configuration</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TLEN</name>
<description>buffer transfer lengh</description>
<bitOffset>18</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKE</name>
<description>PacK Enable These bit is set and cleared
by software. If the Source Size is smaller than the
destination, it will be padded according to the PAM
value. If the Source data size is larger than the
destination one, it will be truncated. The alignment
will be done according to the PAM[0] value. This bit
is protected and can be written only if EN is
0</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAM</name>
<description>Padding/Alignement Mode These bits are
set and cleared by software. Case 1: Source data size
smaller than destination data size - 3 options are
valid. Case 2: Source data size larger than
destination data size. The remainder part is
discarded. When PKE = 1 or DSIZE=SSIZE, these bits
are ignored. These bits are protected and can be
written only if EN is 0</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRGM</name>
<description>Trigger Mode These bits are set and
cleared by software. Note: If TRGM is 11 for the
current block, all the values loaded at the end of
the current block through the linked list mechanism
must keep the same value (TRGM=11) and the same SWRM
value, otherwise the result is undefined. These bits
are protected and can be written only if EN is
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWRM</name>
<description>SW Request Mode This bit is set and
cleared by software. If a HW or SW request is
currently active, the bit change will be delayed
until the current transfer is completed. If the CxMAR
contains a valid address, the CxMDR value will also
be written @ CxMAR address. This bit is protected and
can be written only if EN is 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BWM</name>
<description>Bufferable Write Mode This bit is set
and cleared by software. This bit is protected and
can be written only if EN is 0. Note: All MDMA
destination accesses are non-cacheable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15BNDTR</name>
<displayName>MDMA_C15BNDTR</displayName>
<description>MDMA Channel x block number of data
register</description>
<addressOffset>0x414</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNDT</name>
<description>block number of data to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
<field>
<name>BRSUM</name>
<description>Block Repeat Source address Update Mode
These bits are protected and can be written only if
EN is 0.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRDUM</name>
<description>Block Repeat Destination address Update
Mode These bits are protected and can be written only
if EN is 0.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BRC</name>
<description>Block Repeat Count This field contains
the number of repetitions of the current block (0 to
4095). When the channel is enabled, this register is
read-only, indicating the remaining number of blocks,
excluding the current one. This register decrements
after each complete block transfer. Once the last
block transfer has completed, this register can
either stay at zero or be reloaded automatically from
memory (in Linked List mode - i.e. Link Address
valid). These bits are protected and can be written
only if EN is 0.</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15SAR</name>
<displayName>MDMA_C15SAR</displayName>
<description>MDMA channel x source address
register</description>
<addressOffset>0x418</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAR</name>
<description>source adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15DAR</name>
<displayName>MDMA_C15DAR</displayName>
<description>MDMA channel x destination address
register</description>
<addressOffset>0x41C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAR</name>
<description>Destination adr base</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15BRUR</name>
<displayName>MDMA_C15BRUR</displayName>
<description>MDMA channel x Block Repeat address Update
register</description>
<addressOffset>0x420</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUV</name>
<description>source adresse update
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DUV</name>
<description>destination address update</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15LAR</name>
<displayName>MDMA_C15LAR</displayName>
<description>MDMA channel x Link Address
register</description>
<addressOffset>0x424</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LAR</name>
<description>Link address register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15TBR</name>
<displayName>MDMA_C15TBR</displayName>
<description>MDMA channel x Trigger and Bus selection
Register</description>
<addressOffset>0x428</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEL</name>
<description>Trigger selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SBUS</name>
<description>Source BUS select This bit is protected
and can be written only if EN is 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBUS</name>
<description>Destination BUS slect This bit is
protected and can be written only if EN is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15MAR</name>
<displayName>MDMA_C15MAR</displayName>
<description>MDMA channel x Mask address
register</description>
<addressOffset>0x430</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAR</name>
<description>Mask address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDMA_C15MDR</name>
<displayName>MDMA_C15MDR</displayName>
<description>MDMA channel x Mask Data
register</description>
<addressOffset>0x434</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDR</name>
<description>Mask data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>QUADSPI</name>
<description>QUADSPI</description>
<groupName>QUADSPI</groupName>
<baseAddress>0x52005000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>QUADSPI</name>
<description>QuadSPI global interrupt</description>
<value>92</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>QUADSPI control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>Enable Enable the QUADSPI.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABORT</name>
<description>Abort request This bit aborts the
on-going command sequence. It is automatically reset
once the abort is complete. This bit stops the
current transfer. In polling mode or memory-mapped
mode, this bit also reset the APM bit or the DM
bit.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA enable In indirect mode, DMA can be
used to input or output data via the QUADSPI_DR
register. DMA transfers are initiated when the FIFO
threshold flag, FTF, is set.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEN</name>
<description>Timeout counter enable This bit is valid
only when memory-mapped mode (FMODE = 11) is
selected. Activating this bit causes the chip select
(nCS) to be released (and thus reduces consumption)
if there has not been an access after a certain
amount of time, where this time is defined by
TIMEOUT[15:0] (QUADSPI_LPTR). Enable the timeout
counter. By default, the QUADSPI never stops its
prefetch operation, keeping the previous read
operation active with nCS maintained low, even if no
access to the Flash memory occurs for a long time.
Since Flash memories tend to consume more when nCS is
held low, the application might want to activate the
timeout counter (TCEN = 1, QUADSPI_CR[3]) so that nCS
is released after a period of TIMEOUT[15:0]
(QUADSPI_LPTR) cycles have elapsed without an access
since when the FIFO becomes full with prefetch data.
This bit can be modified only when BUSY =
0.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSHIFT</name>
<description>Sample shift By default, the QUADSPI
samples data 1/2 of a CLK cycle after the data is
driven by the Flash memory. This bit allows the data
is to be sampled later in order to account for
external signal delays. Firmware must assure that
SSHIFT = 0 when in DDR mode (when DDRM = 1). This
field can be modified only when BUSY =
0.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFM</name>
<description>Dual-flash mode This bit activates
dual-flash mode, where two external Flash memories
are used simultaneously to double throughput and
capacity. This bit can be modified only when BUSY =
0.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FSEL</name>
<description>Flash memory selection This bit selects
the Flash memory to be addressed in single flash mode
(when DFM = 0). This bit can be modified only when
BUSY = 0. This bit is ignored when DFM =
1.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FTHRES</name>
<description>FIFO threshold level Defines, in
indirect mode, the threshold number of bytes in the
FIFO that will cause the FIFO threshold flag (FTF,
QUADSPI_SR[2]) to be set. In indirect write mode
(FMODE = 00): ... In indirect read mode (FMODE = 01):
... If DMAEN = 1, then the DMA controller for the
corresponding channel must be disabled before
changing the FTHRES value.</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt enable This bit
enables the transfer error interrupt.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt enable This
bit enables the transfer complete
interrupt.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FTIE</name>
<description>FIFO threshold interrupt enable This bit
enables the FIFO threshold interrupt.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMIE</name>
<description>Status match interrupt enable This bit
enables the status match interrupt.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOIE</name>
<description>TimeOut interrupt enable This bit
enables the TimeOut interrupt.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>APMS</name>
<description>Automatic poll mode stop This bit
determines if automatic polling is stopped after a
match. This bit can be modified only when BUSY =
0.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMM</name>
<description>Polling match mode This bit indicates
which method should be used for determining a match
during automatic polling mode. This bit can be
modified only when BUSY = 0.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>clock prescaler</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<displayName>DCR</displayName>
<description>QUADSPI device configuration
register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKMODE</name>
<description>indicates the level that clk takes
between command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSHT</name>
<description>Chip select high time CSHT+1 defines the
minimum number of CLK cycles which the chip select
(nCS) must remain high between commands issued to the
Flash memory. ... This field can be modified only
when BUSY = 0.</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FSIZE</name>
<description>Flash memory size This field defines the
size of external memory using the following formula:
Number of bytes in Flash memory = 2[FSIZE+1] FSIZE+1
is effectively the number of address bits required to
address the Flash memory. The Flash memory capacity
can be up to 4GB (addressed using 32 bits) in
indirect mode, but the addressable space in
memory-mapped mode is limited to 256MB. If DFM = 1,
FSIZE indicates the total capacity of the two Flash
memories together. This field can be modified only
when BUSY = 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>QUADSPI status register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TEF</name>
<description>Transfer error flag This bit is set in
indirect mode when an invalid address is being
accessed in indirect mode. It is cleared by writing 1
to CTEF.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCF</name>
<description>Transfer complete flag This bit is set
in indirect mode when the programmed number of data
has been transferred or in any mode when the transfer
has been aborted.It is cleared by writing 1 to
CTCF.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FTF</name>
<description>FIFO threshold flag In indirect mode,
this bit is set when the FIFO threshold has been
reached, or if there is any data left in the FIFO
after reads from the Flash memory are complete. It is
cleared automatically as soon as threshold condition
is no longer true. In automatic polling mode this bit
is set every time the status register is read, and
the bit is cleared when the data register is
read.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMF</name>
<description>Status match flag This bit is set in
automatic polling mode when the unmasked received
data matches the corresponding bits in the match
register (QUADSPI_PSMAR). It is cleared by writing 1
to CSMF.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOF</name>
<description>Timeout flag This bit is set when
timeout occurs. It is cleared by writing 1 to
CTOF.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>Busy This bit is set when an operation
is on going. This bit clears automatically when the
operation with the Flash memory is finished and the
FIFO is empty.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLEVEL</name>
<description>FIFO level This field gives the number
of valid bytes which are being held in the FIFO.
FLEVEL = 0 when the FIFO is empty, and 16 when it is
full. In memory-mapped mode and in automatic status
polling mode, FLEVEL is zero.</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>FCR</name>
<displayName>FCR</displayName>
<description>QUADSPI flag clear register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTEF</name>
<description>Clear transfer error flag Writing 1
clears the TEF flag in the QUADSPI_SR
register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCF</name>
<description>Clear transfer complete flag Writing 1
clears the TCF flag in the QUADSPI_SR
register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSMF</name>
<description>Clear status match flag Writing 1 clears
the SMF flag in the QUADSPI_SR register</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTOF</name>
<description>Clear timeout flag Writing 1 clears the
TOF flag in the QUADSPI_SR register</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DLR</name>
<displayName>DLR</displayName>
<description>QUADSPI data length register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DL</name>
<description>Data length Number of data to be
retrieved (value+1) in indirect and status-polling
modes. A value no greater than 3 (indicating 4 bytes)
should be used for status-polling mode. All 1s in
indirect mode means undefined length, where QUADSPI
will continue until the end of memory, as defined by
FSIZE. 0x0000_0000: 1 byte is to be transferred
0x0000_0001: 2 bytes are to be transferred
0x0000_0002: 3 bytes are to be transferred
0x0000_0003: 4 bytes are to be transferred ...
0xFFFF_FFFD: 4,294,967,294 (4G-2) bytes are to be
transferred 0xFFFF_FFFE: 4,294,967,295 (4G-1) bytes
are to be transferred 0xFFFF_FFFF: undefined length
-- all bytes until the end of Flash memory (as
defined by FSIZE) are to be transferred. Continue
reading indefinitely if FSIZE = 0x1F. DL[0] is stuck
at 1 in dual-flash mode (DFM = 1) even when 0 is
written to this bit, thus assuring that each access
transfers an even number of bytes. This field has no
effect when in memory-mapped mode (FMODE = 10). This
field can be written only when BUSY =
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<displayName>CCR</displayName>
<description>QUADSPI communication configuration
register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INSTRUCTION</name>
<description>Instruction Instruction to be send to
the external SPI device. This field can be written
only when BUSY = 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>IMODE</name>
<description>Instruction mode This field defines the
instruction phase mode of operation: This field can
be written only when BUSY = 0.</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ADMODE</name>
<description>Address mode This field defines the
address phase mode of operation: This field can be
written only when BUSY = 0.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ADSIZE</name>
<description>Address size This bit defines address
size: This field can be written only when BUSY =
0.</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ABMODE</name>
<description>Alternate bytes mode This field defines
the alternate-bytes phase mode of operation: This
field can be written only when BUSY =
0.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ABSIZE</name>
<description>Alternate bytes size This bit defines
alternate bytes size: This field can be written only
when BUSY = 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DCYC</name>
<description>Number of dummy cycles This field
defines the duration of the dummy phase. In both SDR
and DDR modes, it specifies a number of CLK cycles
(0-31). This field can be written only when BUSY =
0.</description>
<bitOffset>18</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DMODE</name>
<description>Data mode This field defines the data
phases mode of operation: This field also determines
the dummy phase mode of operation. This field can be
written only when BUSY = 0.</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FMODE</name>
<description>Functional mode This field defines the
QUADSPI functional mode of operation. If DMAEN = 1
already, then the DMA controller for the
corresponding channel must be disabled before
changing the FMODE value. This field can be written
only when BUSY = 0.</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SIOO</name>
<description>Send instruction only once mode See
Section15.3.11: Sending the instruction only once on
page13. This bit has no effect when IMODE = 00. This
field can be written only when BUSY =
0.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DHHC</name>
<description>DDR hold Delay the data output by 1/4 of
the QUADSPI output clock cycle in DDR mode: This
feature is only active in DDR mode. This field can be
written only when BUSY = 0.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDRM</name>
<description>Double data rate mode This bit sets the
DDR mode for the address, alternate byte and data
phase: This field can be written only when BUSY =
0.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AR</name>
<displayName>AR</displayName>
<description>QUADSPI address register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDRESS</name>
<description>[31 0]: Address Address to be send to
the external Flash memory Writes to this field are
ignored when BUSY = 0 or when FMODE = 11
(memory-mapped mode). In dual flash mode, ADDRESS[0]
is automatically stuck to 0 as the address should
always be even</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ABR</name>
<displayName>ABR</displayName>
<description>QUADSPI alternate bytes
registers</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ALTERNATE</name>
<description>Alternate Bytes Optional data to be send
to the external SPI device right after the address.
This field can be written only when BUSY =
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DR</name>
<displayName>DR</displayName>
<description>QUADSPI data register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Data to be sent/received to/from
the external SPI device. In indirect write mode, data
written to this register is stored on the FIFO before
it is sent to the Flash memory during the data phase.
If the FIFO is too full, a write operation is stalled
until the FIFO has enough space to accept the amount
of data being written. In indirect read mode, reading
this register gives (via the FIFO) the data which was
received from the Flash memory. If the FIFO does not
have as many bytes as requested by the read operation
and if BUSY=1, the read operation is stalled until
enough data is present or until the transfer is
complete, whichever happens first. In automatic
polling mode, this register contains the last data
read from the Flash memory (without masking). Word,
halfword, and byte accesses to this register are
supported. In indirect write mode, a byte write adds
1 byte to the FIFO, a halfword write 2, and a word
write 4. Similarly, in indirect read mode, a byte
read removes 1 byte from the FIFO, a halfword read 2,
and a word read 4. Accesses in indirect mode must be
aligned to the bottom of this register: a byte read
must read DATA[7:0] and a halfword read must read
DATA[15:0].</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSMKR</name>
<displayName>PSMKR</displayName>
<description>QUADSPI polling status mask
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MASK</name>
<description>Status mask Mask to be applied to the
status bytes received in polling mode. For bit n:
This field can be written only when BUSY =
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSMAR</name>
<displayName>PSMAR</displayName>
<description>QUADSPI polling status match
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MATCH</name>
<description>Status match Value to be compared with
the masked status register to get a match. This field
can be written only when BUSY = 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PIR</name>
<displayName>PIR</displayName>
<description>QUADSPI polling interval
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INTERVAL</name>
<description>Polling interval Number of CLK cycles
between to read during automatic polling phases. This
field can be written only when BUSY =
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>LPTR</name>
<displayName>LPTR</displayName>
<description>QUADSPI low-power timeout
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMEOUT</name>
<description>Timeout period After each access in
memory-mapped mode, the QUADSPI prefetches the
subsequent bytes and holds these bytes in the FIFO.
This field indicates how many CLK cycles the QUADSPI
waits after the FIFO becomes full until it raises
nCS, putting the Flash memory in a lower-consumption
state. This field can be written only when BUSY =
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RNG</name>
<description>RNG</description>
<groupName>RNG</groupName>
<baseAddress>0x48021800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HASH_RNG</name>
<description>HASH OR RNG interrupt </description>
<value>80</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>RNG control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RNGEN</name>
<description>Random number generator
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IE</name>
<description>Interrupt enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CED</name>
<description>Clock error detection Note: The clock
error detection can be used only when ck_rc48 or
ck_pll1_q (ck_pll1_q = 48MHz) source is selected
otherwise, CED bit must be equal to 1. The clock
error detection cannot be enabled nor disabled on the
fly when RNG peripheral is enabled, to enable or
disable CED the RNG must be disabled.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>RNG status register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DRDY</name>
<description>Data ready Note: If IE=1 in RNG_CR, an
interrupt is generated when DRDY=1. It can rise when
the peripheral is disabled. When the output buffer
becomes empty (after reading RNG_DR), this bit
returns to 0 until a new random value is
generated.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CECS</name>
<description>Clock error current status Note: This
bit is meaningless if CED (Clock error detection) bit
in RNG_CR is equal to 1.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SECS</name>
<description>Seed error current status ** More than
64 consecutive bits at the same value (0 or 1) **
More than 32 consecutive alternances of 0 and 1
(0101010101...01)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CEIS</name>
<description>Clock error interrupt status This bit is
set at the same time as CECS. It is cleared by
writing it to 0. An interrupt is pending if IE = 1 in
the RNG_CR register. Note: This bit is meaningless if
CED (Clock error detection) bit in RNG_CR is equal to
1.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SEIS</name>
<description>Seed error interrupt status This bit is
set at the same time as SECS. It is cleared by
writing it to 0. ** More than 64 consecutive bits at
the same value (0 or 1) ** More than 32 consecutive
alternances of 0 and 1 (0101010101...01) An interrupt
is pending if IE = 1 in the RNG_CR
register.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DR</name>
<displayName>DR</displayName>
<description>The RNG_DR register is a read-only register
that delivers a 32-bit random value when read. The
content of this register is valid when DRDY= 1, even if
RNGEN=0.</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RNDATA</name>
<description>Random data 32-bit random data which are
valid when DRDY=1.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTC</name>
<description>RTC</description>
<groupName>RTC</groupName>
<baseAddress>0x58004000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>RTC_TAMP_STAMP_CSS_LSE</name>
<description>RTC tamper, timestamp</description>
<value>2</value>
</interrupt>
<interrupt>
<name>RTC_WKUP</name>
<description>RTC Wakeup interrupt</description>
<value>3</value>
</interrupt>
<registers>
<register>
<name>RTC_TR</name>
<displayName>RTC_TR</displayName>
<description>The RTC_TR is the calendar time shadow
register. This register must be written in initialization
mode only. Refer to Calendar initialization and
configuration on page9 and Reading the calendar on
page10.This register is write protected. The write access
procedure is described in RTC register write protection
on page9.</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SU</name>
<description>Second units in BCD format</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ST</name>
<description>Second tens in BCD format</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MNU</name>
<description>Minute units in BCD format</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MNT</name>
<description>Minute tens in BCD format</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>HU</name>
<description>Hour units in BCD format</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HT</name>
<description>Hour tens in BCD format</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PM</name>
<description>AM/PM notation</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_DR</name>
<displayName>RTC_DR</displayName>
<description>The RTC_DR is the calendar date shadow
register. This register must be written in initialization
mode only. Refer to Calendar initialization and
configuration on page9 and Reading the calendar on
page10.This register is write protected. The write access
procedure is described in RTC register write protection
on page9.</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00002101</resetValue>
<fields>
<field>
<name>DU</name>
<description>Date units in BCD format</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DT</name>
<description>Date tens in BCD format</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MU</name>
<description>Month units in BCD format</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MT</name>
<description>Month tens in BCD format</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDU</name>
<description>Week day units</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>YU</name>
<description>Year units in BCD format</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YT</name>
<description>Year tens in BCD format</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_CR</name>
<displayName>RTC_CR</displayName>
<description>RTC control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WUCKSEL</name>
<description>Wakeup clock selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSEDGE</name>
<description>Time-stamp event active edge TSE must be
reset when TSEDGE is changed to avoid unwanted TSF
setting.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFCKON</name>
<description>RTC_REFIN reference clock detection
enable (50 or 60Hz) Note: PREDIV_S must be
0x00FF.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BYPSHAD</name>
<description>Bypass the shadow registers Note: If the
frequency of the APB clock is less than seven times
the frequency of RTCCLK, BYPSHAD must be set to
1.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FMT</name>
<description>Hour format</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALRAE</name>
<description>Alarm A enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALRBE</name>
<description>Alarm B enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WUTE</name>
<description>Wakeup timer enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSE</name>
<description>timestamp enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALRAIE</name>
<description>Alarm A interrupt enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALRBIE</name>
<description>Alarm B interrupt enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WUTIE</name>
<description>Wakeup timer interrupt
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSIE</name>
<description>Time-stamp interrupt
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ADD1H</name>
<description>Add 1 hour (summer time change) When
this bit is set outside initialization mode, 1 hour
is added to the calendar time. This bit is always
read as 0.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUB1H</name>
<description>Subtract 1 hour (winter time change)
When this bit is set outside initialization mode, 1
hour is subtracted to the calendar time if the
current hour is not 0. This bit is always read as 0.
Setting this bit has no effect when current hour is
0.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BKP</name>
<description>Backup This bit can be written by the
user to memorize whether the daylight saving time
change has been performed or not.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COSEL</name>
<description>Calibration output selection When COE=1,
this bit selects which signal is output on RTC_CALIB.
These frequencies are valid for RTCCLK at 32.768 kHz
and prescalers at their default values (PREDIV_A=127
and PREDIV_S=255). Refer to Section24.3.15:
Calibration clock output</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>POL</name>
<description>Output polarity This bit is used to
configure the polarity of RTC_ALARM
output</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSEL</name>
<description>Output selection These bits are used to
select the flag to be routed to RTC_ALARM
output</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COE</name>
<description>Calibration output enable This bit
enables the RTC_CALIB output</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITSE</name>
<description>timestamp on internal event
enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTC_ISR</name>
<displayName>RTC_ISR</displayName>
<description>This register is write protected (except for
RTC_ISR[13:8] bits). The write access procedure is
described in RTC register write protection on
page9.</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<resetValue>0x00000007</resetValue>
<fields>
<field>
<name>ALRAWF</name>
<description>Alarm A write flag This bit is set by
hardware when Alarm A values can be changed, after
the ALRAE bit has been set to 0 in RTC_CR. It is
cleared by hardware in initialization
mode.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALRBWF</name>
<description>Alarm B write flag This bit is set by
hardware when Alarm B values can be changed, after
the ALRBE bit has been set to 0 in RTC_CR. It is
cleared by hardware in initialization
mode.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WUTWF</name>
<description>Wakeup timer write flag This bit is set
by hardware up to 2 RTCCLK cycles after the WUTE bit
has been set to 0 in RTC_CR, and is cleared up to 2
RTCCLK cycles after the WUTE bit has been set to 1.
The wakeup timer values can be changed when WUTE bit
is cleared and WUTWF is set.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHPF</name>
<description>Shift operation pending This flag is set
by hardware as soon as a shift operation is initiated
by a write to the RTC_SHIFTR register. It is cleared
by hardware when the corresponding shift operation
has been executed. Writing to the SHPF bit has no
effect.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INITS</name>
<description>Initialization status flag This bit is
set by hardware when the calendar year field is
different from 0 (Backup domain reset
state).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RSF</name>
<description>Registers synchronization flag This bit
is set by hardware each time the calendar registers
are copied into the shadow registers (RTC_SSRx,
RTC_TRx and RTC_DRx). This bit is cleared by hardware
in initialization mode, while a shift operation is
pending (SHPF=1), or when in bypass shadow register
mode (BYPSHAD=1). This bit can also be cleared by
software. It is cleared either by software or by
hardware in initialization mode.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INITF</name>
<description>Initialization flag When this bit is set
to 1, the RTC is in initialization state, and the
time, date and prescaler registers can be
updated.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INIT</name>
<description>Initialization mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALRAF</name>
<description>Alarm A flag This flag is set by
hardware when the time/date registers (RTC_TR and
RTC_DR) match the Alarm A register (RTC_ALRMAR). This
flag is cleared by software by writing
0.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALRBF</name>
<description>Alarm B flag This flag is set by
hardware when the time/date registers (RTC_TR and
RTC_DR) match the Alarm B register (RTC_ALRMBR). This
flag is cleared by software by writing
0.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WUTF</name>
<description>Wakeup timer flag This flag is set by
hardware when the wakeup auto-reload counter reaches
0. This flag is cleared by software by writing 0.
This flag must be cleared by software at least 1.5
RTCCLK periods before WUTF is set to 1
again.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSF</name>
<description>Time-stamp flag This flag is set by
hardware when a time-stamp event occurs. This flag is
cleared by software by writing 0.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSOVF</name>
<description>Time-stamp overflow flag This flag is
set by hardware when a time-stamp event occurs while
TSF is already set. This flag is cleared by software
by writing 0. It is recommended to check and then
clear TSOVF only after clearing the TSF bit.
Otherwise, an overflow might not be noticed if a
time-stamp event occurs immediately before the TSF
bit is cleared.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TAMP1F</name>
<description>RTC_TAMP1 detection flag This flag is
set by hardware when a tamper detection event is
detected on the RTC_TAMP1 input. It is cleared by
software writing 0</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TAMP2F</name>
<description>RTC_TAMP2 detection flag This flag is
set by hardware when a tamper detection event is
detected on the RTC_TAMP2 input. It is cleared by
software writing 0</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TAMP3F</name>
<description>RTC_TAMP3 detection flag This flag is
set by hardware when a tamper detection event is
detected on the RTC_TAMP3 input. It is cleared by
software writing 0</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RECALPF</name>
<description>Recalibration pending Flag The RECALPF
status flag is automatically set to 1 when software
writes to the RTC_CALR register, indicating that the
RTC_CALR register is blocked. When the new
calibration settings are taken into account, this bit
returns to 0. Refer to Re-calibration
on-the-fly.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITSF</name>
<description>Internal tTime-stamp flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTC_PRER</name>
<displayName>RTC_PRER</displayName>
<description>This register must be written in
initialization mode only. The initialization must be
performed in two separate write accesses. Refer to
Calendar initialization and configuration on page9.This
register is write protected. The write access procedure
is described in RTC register write protection on
page9.</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x007F00FF</resetValue>
<fields>
<field>
<name>PREDIV_S</name>
<description>Synchronous prescaler factor This is the
synchronous division factor: ck_spre frequency =
ck_apre frequency/(PREDIV_S+1)</description>
<bitOffset>0</bitOffset>
<bitWidth>15</bitWidth>
</field>
<field>
<name>PREDIV_A</name>
<description>Asynchronous prescaler factor This is
the asynchronous division factor: ck_apre frequency =
RTCCLK frequency/(PREDIV_A+1)</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_WUTR</name>
<displayName>RTC_WUTR</displayName>
<description>This register can be written only when WUTWF
is set to 1 in RTC_ISR.This register is write protected.
The write access procedure is described in RTC register
write protection on page9.</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>WUT</name>
<description>Wakeup auto-reload value bits When the
wakeup timer is enabled (WUTE set to 1), the WUTF
flag is set every (WUT[15:0] + 1) ck_wut cycles. The
ck_wut period is selected through WUCKSEL[2:0] bits
of the RTC_CR register When WUCKSEL[2] = 1, the
wakeup timer becomes 17-bits and WUCKSEL[1]
effectively becomes WUT[16] the most-significant bit
to be reloaded into the timer. The first assertion of
WUTF occurs (WUT+1) ck_wut cycles after WUTE is set.
Setting WUT[15:0] to 0x0000 with WUCKSEL[2:0] =011
(RTCCLK/2) is forbidden.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_ALRMAR</name>
<displayName>RTC_ALRMAR</displayName>
<description>This register can be written only when
ALRAWF is set to 1 in RTC_ISR, or in initialization
mode.This register is write protected. The write access
procedure is described in RTC register write protection
on page9.</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SU</name>
<description>Second units in BCD
format.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ST</name>
<description>Second tens in BCD format.</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MSK1</name>
<description>Alarm A seconds mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MNU</name>
<description>Minute units in BCD
format.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MNT</name>
<description>Minute tens in BCD format.</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MSK2</name>
<description>Alarm A minutes mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HU</name>
<description>Hour units in BCD format.</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HT</name>
<description>Hour tens in BCD format.</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PM</name>
<description>AM/PM notation</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSK3</name>
<description>Alarm A hours mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DU</name>
<description>Date units or day in BCD
format.</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DT</name>
<description>Date tens in BCD format.</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WDSEL</name>
<description>Week day selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSK4</name>
<description>Alarm A date mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_ALRMBR</name>
<displayName>RTC_ALRMBR</displayName>
<description>This register can be written only when
ALRBWF is set to 1 in RTC_ISR, or in initialization
mode.This register is write protected. The write access
procedure is described in RTC register write protection
on page9.</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SU</name>
<description>Second units in BCD format</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ST</name>
<description>Second tens in BCD format</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MSK1</name>
<description>Alarm B seconds mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MNU</name>
<description>Minute units in BCD format</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MNT</name>
<description>Minute tens in BCD format</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MSK2</name>
<description>Alarm B minutes mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HU</name>
<description>Hour units in BCD format</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HT</name>
<description>Hour tens in BCD format</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PM</name>
<description>AM/PM notation</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSK3</name>
<description>Alarm B hours mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DU</name>
<description>Date units or day in BCD
format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DT</name>
<description>Date tens in BCD format</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WDSEL</name>
<description>Week day selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSK4</name>
<description>Alarm B date mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_WPR</name>
<displayName>RTC_WPR</displayName>
<description>RTC write protection register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY</name>
<description>Write protection key This byte is
written by software. Reading this byte always returns
0x00. Refer to RTC register write protection for a
description of how to unlock RTC register write
protection.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_SSR</name>
<displayName>RTC_SSR</displayName>
<description>RTC sub second register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SS</name>
<description>Sub second value SS[15:0] is the value
in the synchronous prescaler counter. The fraction of
a second is given by the formula below: Second
fraction = (PREDIV_S - SS) / (PREDIV_S + 1) Note: SS
can be larger than PREDIV_S only after a shift
operation. In that case, the correct time/date is one
second less than as indicated by
RTC_TR/RTC_DR.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_SHIFTR</name>
<displayName>RTC_SHIFTR</displayName>
<description>This register is write protected. The write
access procedure is described in RTC register write
protection on page9.</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUBFS</name>
<description>Subtract a fraction of a second These
bits are write only and is always read as zero.
Writing to this bit has no effect when a shift
operation is pending (when SHPF=1, in RTC_ISR). The
value which is written to SUBFS is added to the
synchronous prescaler counter. Since this counter
counts down, this operation effectively subtracts
from (delays) the clock by: Delay (seconds) = SUBFS /
(PREDIV_S + 1) A fraction of a second can effectively
be added to the clock (advancing the clock) when the
ADD1S function is used in conjunction with SUBFS,
effectively advancing the clock by: Advance (seconds)
= (1 - (SUBFS / (PREDIV_S + 1))). Note: Writing to
SUBFS causes RSF to be cleared. Software can then
wait until RSF=1 to be sure that the shadow registers
have been updated with the shifted
time.</description>
<bitOffset>0</bitOffset>
<bitWidth>15</bitWidth>
</field>
<field>
<name>ADD1S</name>
<description>Add one second This bit is write only
and is always read as zero. Writing to this bit has
no effect when a shift operation is pending (when
SHPF=1, in RTC_ISR). This function is intended to be
used with SUBFS (see description below) in order to
effectively add a fraction of a second to the clock
in an atomic operation.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_TSTR</name>
<displayName>RTC_TSTR</displayName>
<description>The content of this register is valid only
when TSF is set to 1 in RTC_ISR. It is cleared when TSF
bit is reset.</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SU</name>
<description>Second units in BCD
format.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ST</name>
<description>Second tens in BCD format.</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MNU</name>
<description>Minute units in BCD
format.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MNT</name>
<description>Minute tens in BCD format.</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>HU</name>
<description>Hour units in BCD format.</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>HT</name>
<description>Hour tens in BCD format.</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PM</name>
<description>AM/PM notation</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_TSDR</name>
<displayName>RTC_TSDR</displayName>
<description>The content of this register is valid only
when TSF is set to 1 in RTC_ISR. It is cleared when TSF
bit is reset.</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DU</name>
<description>Date units in BCD format</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DT</name>
<description>Date tens in BCD format</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MU</name>
<description>Month units in BCD format</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MT</name>
<description>Month tens in BCD format</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDU</name>
<description>Week day units</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_TSSSR</name>
<displayName>RTC_TSSSR</displayName>
<description>The content of this register is valid only
when RTC_ISR/TSF is set. It is cleared when the
RTC_ISR/TSF bit is reset.</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SS</name>
<description>Sub second value SS[15:0] is the value
of the synchronous prescaler counter when the
timestamp event occurred.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_CALR</name>
<displayName>RTC_CALR</displayName>
<description>This register is write protected. The write
access procedure is described in RTC register write
protection on page9.</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CALM</name>
<description>Calibration minus The frequency of the
calendar is reduced by masking CALM out of 220 RTCCLK
pulses (32 seconds if the input frequency is 32768
Hz). This decreases the frequency of the calendar
with a resolution of 0.9537 ppm. To increase the
frequency of the calendar, this feature should be
used in conjunction with CALP. See Section24.3.12:
RTC smooth digital calibration on
page13.</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>CALW16</name>
<description>Use a 16-second calibration cycle period
When CALW16 is set to 1, the 16-second calibration
cycle period is selected.This bit must not be set to
1 if CALW8=1. Note: CALM[0] is stuck at 0 when
CALW16= 1. Refer to Section24.3.12: RTC smooth
digital calibration.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALW8</name>
<description>Use an 8-second calibration cycle period
When CALW8 is set to 1, the 8-second calibration
cycle period is selected. Note: CALM[1:0] are stuck
at 00; when CALW8= 1. Refer to Section24.3.12: RTC
smooth digital calibration.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALP</name>
<description>Increase frequency of RTC by 488.5 ppm
This feature is intended to be used in conjunction
with CALM, which lowers the frequency of the calendar
with a fine resolution. if the input frequency is
32768 Hz, the number of RTCCLK pulses added during a
32-second window is calculated as follows: (512 *
CALP) - CALM. Refer to Section24.3.12: RTC smooth
digital calibration.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_TAMPCR</name>
<displayName>RTC_TAMPCR</displayName>
<description>RTC tamper and alternate function
configuration register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TAMP1E</name>
<description>RTC_TAMP1 input detection
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP1TRG</name>
<description>Active level for RTC_TAMP1 input If
TAMPFLT != 00 if TAMPFLT = 00:</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPIE</name>
<description>Tamper interrupt enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP2E</name>
<description>RTC_TAMP2 input detection
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP2TRG</name>
<description>Active level for RTC_TAMP2 input if
TAMPFLT != 00: if TAMPFLT = 00:</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP3E</name>
<description>RTC_TAMP3 detection enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP3TRG</name>
<description>Active level for RTC_TAMP3 input if
TAMPFLT != 00: if TAMPFLT = 00:</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPTS</name>
<description>Activate timestamp on tamper detection
event TAMPTS is valid even if TSE=0 in the RTC_CR
register.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPFREQ</name>
<description>Tamper sampling frequency Determines the
frequency at which each of the RTC_TAMPx inputs are
sampled.</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TAMPFLT</name>
<description>RTC_TAMPx filter count These bits
determines the number of consecutive samples at the
specified level (TAMP*TRG) needed to activate a
Tamper event. TAMPFLT is valid for each of the
RTC_TAMPx inputs.</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TAMPPRCH</name>
<description>RTC_TAMPx precharge duration These bit
determines the duration of time during which the
pull-up/is activated before each sample. TAMPPRCH is
valid for each of the RTC_TAMPx inputs.</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TAMPPUDIS</name>
<description>RTC_TAMPx pull-up disable This bit
determines if each of the RTC_TAMPx pins are
pre-charged before each sample.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP1IE</name>
<description>Tamper 1 interrupt enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP1NOERASE</name>
<description>Tamper 1 no erase</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP1MF</name>
<description>Tamper 1 mask flag</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP2IE</name>
<description>Tamper 2 interrupt enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP2NOERASE</name>
<description>Tamper 2 no erase</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP2MF</name>
<description>Tamper 2 mask flag</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP3IE</name>
<description>Tamper 3 interrupt enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP3NOERASE</name>
<description>Tamper 3 no erase</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMP3MF</name>
<description>Tamper 3 mask flag</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_ALRMASSR</name>
<displayName>RTC_ALRMASSR</displayName>
<description>This register can be written only when ALRAE
is reset in RTC_CR register, or in initialization
mode.This register is write protected. The write access
procedure is described in RTC register write protection
on page9</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SS</name>
<description>Sub seconds value This value is compared
with the contents of the synchronous prescaler
counter to determine if Alarm A is to be activated.
Only bits 0 up MASKSS-1 are compared.</description>
<bitOffset>0</bitOffset>
<bitWidth>15</bitWidth>
</field>
<field>
<name>MASKSS</name>
<description>Mask the most-significant bits starting
at this bit ... The overflow bits of the synchronous
counter (bits 15) is never compared. This bit can be
different from 0 only after a shift
operation.</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_ALRMBSSR</name>
<displayName>RTC_ALRMBSSR</displayName>
<description>This register can be written only when ALRBE
is reset in RTC_CR register, or in initialization
mode.This register is write protected.The write access
procedure is described in Section: RTC register write
protection.</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SS</name>
<description>Sub seconds value This value is compared
with the contents of the synchronous prescaler
counter to determine if Alarm B is to be activated.
Only bits 0 up to MASKSS-1 are
compared.</description>
<bitOffset>0</bitOffset>
<bitWidth>15</bitWidth>
</field>
<field>
<name>MASKSS</name>
<description>Mask the most-significant bits starting
at this bit ... The overflow bits of the synchronous
counter (bits 15) is never compared. This bit can be
different from 0 only after a shift
operation.</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP0R</name>
<displayName>RTC_BKP0R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP1R</name>
<displayName>RTC_BKP1R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP2R</name>
<displayName>RTC_BKP2R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP3R</name>
<displayName>RTC_BKP3R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP4R</name>
<displayName>RTC_BKP4R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP5R</name>
<displayName>RTC_BKP5R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP6R</name>
<displayName>RTC_BKP6R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP7R</name>
<displayName>RTC_BKP7R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP8R</name>
<displayName>RTC_BKP8R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP9R</name>
<displayName>RTC_BKP9R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP10R</name>
<displayName>RTC_BKP10R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x78</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP11R</name>
<displayName>RTC_BKP11R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP12R</name>
<displayName>RTC_BKP12R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP13R</name>
<displayName>RTC_BKP13R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP14R</name>
<displayName>RTC_BKP14R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP15R</name>
<displayName>RTC_BKP15R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_OR</name>
<displayName>RTC_OR</displayName>
<description>RTC option register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RTC_ALARM_TYPE</name>
<description>RTC_ALARM output type on
PC13</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_OUT_RMP</name>
<description>RTC_OUT remap</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP16R</name>
<displayName>RTC_BKP16R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP17R</name>
<displayName>RTC_BKP17R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP18R</name>
<displayName>RTC_BKP18R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP19R</name>
<displayName>RTC_BKP19R</displayName>
<description>RTC backup registers</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP20R</name>
<displayName>RTC_BKP20R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP21R</name>
<displayName>RTC_BKP21R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP22R</name>
<displayName>RTC_BKP22R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP23R</name>
<displayName>RTC_BKP23R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP24R</name>
<displayName>RTC_BKP24R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP25R</name>
<displayName>RTC_BKP25R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP26R</name>
<displayName>RTC_BKP26R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP27R</name>
<displayName>RTC_BKP27R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP28R</name>
<displayName>RTC_BKP28R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP29R</name>
<displayName>RTC_BKP29R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP30R</name>
<displayName>RTC_BKP30R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTC_BKP31R</name>
<displayName>RTC_BKP31R</displayName>
<description>RTC backup registers</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKP</name>
<description>The application can write or read data
to and from these registers. They are powered-on by
VBAT when VDD is switched off, so that they are not
reset by System reset, and their contents remain
valid when the device operates in low-power mode.
This register is reset on a tamper detection event,
as long as TAMPxF=1. or when the Flash readout
protection is disabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SAI4</name>
<description>SAI</description>
<groupName>SAI</groupName>
<baseAddress>0x58005400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SAI4</name>
<description>SAI4 global interrupt</description>
<value>146</value>
</interrupt>
<registers>
<register>
<name>SAI_GCR</name>
<displayName>SAI_GCR</displayName>
<description>Global configuration register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYNCOUT</name>
<description>Synchronization outputs These bits are
set and cleared by software.</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCIN</name>
<description>Synchronization inputs</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_ACR1</name>
<displayName>SAI_ACR1</displayName>
<description>Configuration register 1</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>MODE</name>
<description>SAIx audio block mode
immediately</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PRTCFG</name>
<description>Protocol configuration. These bits are
set and cleared by software. These bits have to be
configured when the audio block is
disabled.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DS</name>
<description>Data size. These bits are set and
cleared by software. These bits are ignored when the
SPDIF protocols are selected (bit PRTCFG[1:0]),
because the frame and the data size are fixed in such
case. When the companding mode is selected through
COMP[1:0] bits, DS[1:0] are ignored since the data
size is fixed to 8 bits by the algorithm. These bits
must be configured when the audio block is
disabled.</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>LSBFIRST</name>
<description>Least significant bit first. This bit is
set and cleared by software. It must be configured
when the audio block is disabled. This bit has no
meaning in AC97 audio protocol since AC97 data are
always transferred with the MSB first. This bit has
no meaning in SPDIF audio protocol since in SPDIF
data are always transferred with LSB
first.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSTR</name>
<description>Clock strobing edge. This bit is set and
cleared by software. It must be configured when the
audio block is disabled. This bit has no meaning in
SPDIF audio protocol.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCEN</name>
<description>Synchronization enable. These bits are
set and cleared by software. They must be configured
when the audio sub-block is disabled. Note: The audio
sub-block should be configured as asynchronous when
SPDIF mode is enabled.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MONO</name>
<description>Mono mode. This bit is set and cleared
by software. It is meaningful only when the number of
slots is equal to 2. When the mono mode is selected,
slot 0 data are duplicated on slot 1 when the audio
block operates as a transmitter. In reception mode,
the slot1 is discarded and only the data received
from slot 0 are stored. Refer to Section: Mono/stereo
mode for more details.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OUTDRIV</name>
<description>Output drive. This bit is set and
cleared by software. Note: This bit has to be set
before enabling the audio block and after the audio
block configuration.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAIXEN</name>
<description>Audio block enable where x is A or B.
This bit is set by software. To switch off the audio
block, the application software must program this bit
to 0 and poll the bit till it reads back 0, meaning
that the block is completely disabled. Before setting
this bit to 1, check that it is set to 0, otherwise
the enable command will not be taken into account.
This bit allows to control the state of SAIx audio
block. If it is disabled when an audio frame transfer
is ongoing, the ongoing transfer completes and the
cell is fully disabled at the end of this audio frame
transfer. Note: When SAIx block is configured in
master mode, the clock must be present on the input
of SAIx before setting SAIXEN bit.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA enable. This bit is set and cleared
by software. Note: Since the audio block defaults to
operate as a transmitter after reset, the MODE[1:0]
bits must be configured before setting DMAEN to avoid
a DMA request in receiver mode.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOMCK</name>
<description>No divider</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCKDIV</name>
<description>Master clock divider. These bits are set
and cleared by software. These bits are meaningless
when the audio block operates in slave mode. They
have to be configured when the audio block is
disabled. Others: the master clock frequency is
calculated accordingly to the following
formula:</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>OSR</name>
<description>Oversampling ratio for master
clock</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_ACR2</name>
<displayName>SAI_ACR2</displayName>
<description>Configuration register 2</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FTH</name>
<description>FIFO threshold. This bit is set and
cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FFLUSH</name>
<description>FIFO flush. This bit is set by software.
It is always read as 0. This bit should be configured
when the SAI is disabled.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TRIS</name>
<description>Tristate management on data line. This
bit is set and cleared by software. It is meaningful
only if the audio block is configured as a
transmitter. This bit is not used when the audio
block is configured in SPDIF mode. It should be
configured when SAI is disabled. Refer to Section:
Output data line management on an inactive slot for
more details.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MUTE</name>
<description>Mute. This bit is set and cleared by
software. It is meaningful only when the audio block
operates as a transmitter. The MUTE value is linked
to value of MUTEVAL if the number of slots is lower
or equal to 2, or equal to 0 if it is greater than 2.
Refer to Section: Mute mode for more details. Note:
This bit is meaningless and should not be used for
SPDIF audio blocks.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MUTEVAL</name>
<description>Mute value. This bit is set and cleared
by software.It must be written before enabling the
audio block: SAIXEN. This bit is meaningful only when
the audio block operates as a transmitter, the number
of slots is lower or equal to 2 and the MUTE bit is
set. If more slots are declared, the bit value sent
during the transmission in mute mode is equal to 0,
whatever the value of MUTEVAL. if the number of slot
is lower or equal to 2 and MUTEVAL = 1, the MUTE
value transmitted for each slot is the one sent
during the previous frame. Refer to Section: Mute
mode for more details. Note: This bit is meaningless
and should not be used for SPDIF audio
blocks.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MUTECNT</name>
<description>Mute counter. These bits are set and
cleared by software. They are used only in reception
mode. The value set in these bits is compared to the
number of consecutive mute frames detected in
reception. When the number of mute frames is equal to
this value, the flag MUTEDET will be set and an
interrupt will be generated if bit MUTEDETIE is set.
Refer to Section: Mute mode for more
details.</description>
<bitOffset>7</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPL</name>
<description>Complement bit. This bit is set and
cleared by software. It defines the type of
complement to be used for companding mode Note: This
bit has effect only when the companding mode is -Law
algorithm or A-Law algorithm.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COMP</name>
<description>Companding mode. These bits are set and
cleared by software. The -Law and the A-Law log are a
part of the CCITT G.711 recommendation, the type of
complement that will be used depends on CPL bit. The
data expansion or data compression are determined by
the state of bit MODE[0]. The data compression is
applied if the audio block is configured as a
transmitter. The data expansion is automatically
applied when the audio block is configured as a
receiver. Refer to Section: Companding mode for more
details. Note: Companding mode is applicable only
when TDM is selected.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SAI_AFRCR</name>
<displayName>SAI_AFRCR</displayName>
<description>This register has no meaning in AC97 and
SPDIF audio protocol</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<resetValue>0x00000007</resetValue>
<fields>
<field>
<name>FRL</name>
<description>Frame length. These bits are set and
cleared by software. They define the audio frame
length expressed in number of SCK clock cycles: the
number of bits in the frame is equal to FRL[7:0] + 1.
The minimum number of bits to transfer in an audio
frame must be equal to 8, otherwise the audio block
will behaves in an unexpected way. This is the case
when the data size is 8 bits and only one slot 0 is
defined in NBSLOT[4:0] of SAI_xSLOTR register
(NBSLOT[3:0] = 0000). In master mode, if the master
clock (available on MCLK_x pin) is used, the frame
length should be aligned with a number equal to a
power of 2, ranging from 8 to 256. When the master
clock is not used (NODIV = 1), it is recommended to
program the frame length to an value ranging from 8
to 256. These bits are meaningless and are not used
in AC97 or SPDIF audio block
configuration.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSALL</name>
<description>Frame synchronization active level
length. These bits are set and cleared by software.
They specify the length in number of bit clock (SCK)
+ 1 (FSALL[6:0] + 1) of the active level of the FS
signal in the audio frame These bits are meaningless
and are not used in AC97 or SPDIF audio block
configuration. They must be configured when the audio
block is disabled.</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSDEF</name>
<description>Frame synchronization definition. This
bit is set and cleared by software. When the bit is
set, the number of slots defined in the SAI_xSLOTR
register has to be even. It means that half of this
number of slots will be dedicated to the left channel
and the other slots for the right channel (e.g: this
bit has to be set for I2S or MSB/LSB-justified
protocols...). This bit is meaningless and is not
used in AC97 or SPDIF audio block configuration. It
must be configured when the audio block is
disabled.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FSPOL</name>
<description>Frame synchronization polarity. This bit
is set and cleared by software. It is used to
configure the level of the start of frame on the FS
signal. It is meaningless and is not used in AC97 or
SPDIF audio block configuration. This bit must be
configured when the audio block is
disabled.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOFF</name>
<description>Frame synchronization offset. This bit
is set and cleared by software. It is meaningless and
is not used in AC97 or SPDIF audio block
configuration. This bit must be configured when the
audio block is disabled.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SAI_ASLOTR</name>
<displayName>SAI_ASLOTR</displayName>
<description>This register has no meaning in AC97 and
SPDIF audio protocol</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FBOFF</name>
<description>First bit offset These bits are set and
cleared by software. The value set in this bitfield
defines the position of the first data transfer bit
in the slot. It represents an offset value. In
transmission mode, the bits outside the data field
are forced to 0. In reception mode, the extra
received bits are discarded. These bits must be set
when the audio block is disabled. They are ignored in
AC97 or SPDIF mode.</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SLOTSZ</name>
<description>Slot size This bits is set and cleared
by software. The slot size must be higher or equal to
the data size. If this condition is not respected,
the behavior of the SAI will be undetermined. Refer
to Section: Output data line management on an
inactive slot for information on how to drive SD
line. These bits must be set when the audio block is
disabled. They are ignored in AC97 or SPDIF
mode.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBSLOT</name>
<description>Number of slots in an audio frame. These
bits are set and cleared by software. The value set
in this bitfield represents the number of slots + 1
in the audio frame (including the number of inactive
slots). The maximum number of slots is 16. The number
of slots should be even if FSDEF bit in the SAI_xFRCR
register is set. The number of slots must be
configured when the audio block is disabled. They are
ignored in AC97 or SPDIF mode.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SLOTEN</name>
<description>Slot enable. These bits are set and
cleared by software. Each SLOTEN bit corresponds to a
slot position from 0 to 15 (maximum 16 slots). The
slot must be enabled when the audio block is
disabled. They are ignored in AC97 or SPDIF
mode.</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_AIM</name>
<displayName>SAI_AIM</displayName>
<description>Interrupt mask register 2</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVRUDRIE</name>
<description>Overrun/underrun interrupt enable. This
bit is set and cleared by software. When this bit is
set, an interrupt is generated if the OVRUDR bit in
the SAI_xSR register is set.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUTEDETIE</name>
<description>Mute detection interrupt enable. This
bit is set and cleared by software. When this bit is
set, an interrupt is generated if the MUTEDET bit in
the SAI_xSR register is set. This bit has a meaning
only if the audio block is configured in receiver
mode.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WCKCFGIE</name>
<description>Wrong clock configuration interrupt
enable. This bit is set and cleared by software. This
bit is taken into account only if the audio block is
configured as a master (MODE[1] = 0) and NODIV = 0.
It generates an interrupt if the WCKCFG flag in the
SAI_xSR register is set. Note: This bit is used only
in TDM mode and is meaningless in other
modes.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQIE</name>
<description>FIFO request interrupt enable. This bit
is set and cleared by software. When this bit is set,
an interrupt is generated if the FREQ bit in the
SAI_xSR register is set. Since the audio block
defaults to operate as a transmitter after reset, the
MODE bit must be configured before setting FREQIE to
avoid a parasitic interruption in receiver
mode,</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNRDYIE</name>
<description>Codec not ready interrupt enable (AC97).
This bit is set and cleared by software. When the
interrupt is enabled, the audio block detects in the
slot 0 (tag0) of the AC97 frame if the Codec
connected to this line is ready or not. If it is not
ready, the CNRDY flag in the SAI_xSR register is set
and an interruption i generated. This bit has a
meaning only if the AC97 mode is selected through
PRTCFG[1:0] bits and the audio block is operates as a
receiver.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AFSDETIE</name>
<description>Anticipated frame synchronization
detection interrupt enable. This bit is set and
cleared by software. When this bit is set, an
interrupt will be generated if the AFSDET bit in the
SAI_xSR register is set. This bit is meaningless in
AC97, SPDIF mode or when the audio block operates as
a master.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LFSDETIE</name>
<description>Late frame synchronization detection
interrupt enable. This bit is set and cleared by
software. When this bit is set, an interrupt will be
generated if the LFSDET bit is set in the SAI_xSR
register. This bit is meaningless in AC97, SPDIF mode
or when the audio block operates as a
master.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_ASR</name>
<displayName>SAI_ASR</displayName>
<description>Status register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000008</resetValue>
<fields>
<field>
<name>OVRUDR</name>
<description>Overrun / underrun. This bit is read
only. The overrun and underrun conditions can occur
only when the audio block is configured as a receiver
and a transmitter, respectively. It can generate an
interrupt if OVRUDRIE bit is set in SAI_xIM register.
This flag is cleared when the software sets COVRUDR
bit in SAI_xCLRFR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUTEDET</name>
<description>Mute detection. This bit is read only.
This flag is set if consecutive 0 values are received
in each slot of a given audio frame and for a
consecutive number of audio frames (set in the
MUTECNT bit in the SAI_xCR2 register). It can
generate an interrupt if MUTEDETIE bit is set in
SAI_xIM register. This flag is cleared when the
software sets bit CMUTEDET in the SAI_xCLRFR
register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WCKCFG</name>
<description>Wrong clock configuration flag. This bit
is read only. This bit is used only when the audio
block operates in master mode (MODE[1] = 0) and NODIV
= 0. It can generate an interrupt if WCKCFGIE bit is
set in SAI_xIM register. This flag is cleared when
the software sets CWCKCFG bit in SAI_xCLRFR
register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQ</name>
<description>FIFO request. This bit is read only. The
request depends on the audio block configuration: If
the block is configured in transmission mode, the
FIFO request is related to a write request operation
in the SAI_xDR. If the block configured in reception,
the FIFO request related to a read request operation
from the SAI_xDR. This flag can generate an interrupt
if FREQIE bit is set in SAI_xIM
register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNRDY</name>
<description>Codec not ready. This bit is read only.
This bit is used only when the AC97 audio protocol is
selected in the SAI_xCR1 register and configured in
receiver mode. It can generate an interrupt if
CNRDYIE bit is set in SAI_xIM register. This flag is
cleared when the software sets CCNRDY bit in
SAI_xCLRFR register.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AFSDET</name>
<description>Anticipated frame synchronization
detection. This bit is read only. This flag can be
set only if the audio block is configured in slave
mode. It is not used in AC97or SPDIF mode. It can
generate an interrupt if AFSDETIE bit is set in
SAI_xIM register. This flag is cleared when the
software sets CAFSDET bit in SAI_xCLRFR
register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LFSDET</name>
<description>Late frame synchronization detection.
This bit is read only. This flag can be set only if
the audio block is configured in slave mode. It is
not used in AC97 or SPDIF mode. It can generate an
interrupt if LFSDETIE bit is set in the SAI_xIM
register. This flag is cleared when the software sets
bit CLFSDET in SAI_xCLRFR register</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLVL</name>
<description>FIFO level threshold. This bit is read
only. The FIFO level threshold flag is managed only
by hardware and its setting depends on SAI block
configuration (transmitter or receiver mode). If the
SAI block is configured as transmitter: If SAI block
is configured as receiver:</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_ACLRFR</name>
<displayName>SAI_ACLRFR</displayName>
<description>Clear flag register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVRUDR</name>
<description>Clear overrun / underrun. This bit is
write only. Programming this bit to 1 clears the
OVRUDR flag in the SAI_xSR register. Reading this bit
always returns the value 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMUTEDET</name>
<description>Mute detection flag. This bit is write
only. Programming this bit to 1 clears the MUTEDET
flag in the SAI_xSR register. Reading this bit always
returns the value 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CWCKCFG</name>
<description>Clear wrong clock configuration flag.
This bit is write only. Programming this bit to 1
clears the WCKCFG flag in the SAI_xSR register. This
bit is used only when the audio block is set as
master (MODE[1] = 0) and NODIV = 0 in the SAI_xCR1
register. Reading this bit always returns the value
0.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCNRDY</name>
<description>Clear Codec not ready flag. This bit is
write only. Programming this bit to 1 clears the
CNRDY flag in the SAI_xSR register. This bit is used
only when the AC97 audio protocol is selected in the
SAI_xCR1 register. Reading this bit always returns
the value 0.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAFSDET</name>
<description>Clear anticipated frame synchronization
detection flag. This bit is write only. Programming
this bit to 1 clears the AFSDET flag in the SAI_xSR
register. It is not used in AC97or SPDIF mode.
Reading this bit always returns the value
0.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLFSDET</name>
<description>Clear late frame synchronization
detection flag. This bit is write only. Programming
this bit to 1 clears the LFSDET flag in the SAI_xSR
register. This bit is not used in AC97or SPDIF mode
Reading this bit always returns the value
0.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_ADR</name>
<displayName>SAI_ADR</displayName>
<description>Data register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data A write to this register loads the
FIFO provided the FIFO is not full. A read from this
register empties the FIFO if the FIFO is not
empty.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_BCR1</name>
<displayName>SAI_BCR1</displayName>
<description>Configuration register 1</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>MODE</name>
<description>SAIx audio block mode
immediately</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PRTCFG</name>
<description>Protocol configuration. These bits are
set and cleared by software. These bits have to be
configured when the audio block is
disabled.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DS</name>
<description>Data size. These bits are set and
cleared by software. These bits are ignored when the
SPDIF protocols are selected (bit PRTCFG[1:0]),
because the frame and the data size are fixed in such
case. When the companding mode is selected through
COMP[1:0] bits, DS[1:0] are ignored since the data
size is fixed to 8 bits by the algorithm. These bits
must be configured when the audio block is
disabled.</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>LSBFIRST</name>
<description>Least significant bit first. This bit is
set and cleared by software. It must be configured
when the audio block is disabled. This bit has no
meaning in AC97 audio protocol since AC97 data are
always transferred with the MSB first. This bit has
no meaning in SPDIF audio protocol since in SPDIF
data are always transferred with LSB
first.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSTR</name>
<description>Clock strobing edge. This bit is set and
cleared by software. It must be configured when the
audio block is disabled. This bit has no meaning in
SPDIF audio protocol.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCEN</name>
<description>Synchronization enable. These bits are
set and cleared by software. They must be configured
when the audio sub-block is disabled. Note: The audio
sub-block should be configured as asynchronous when
SPDIF mode is enabled.</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MONO</name>
<description>Mono mode. This bit is set and cleared
by software. It is meaningful only when the number of
slots is equal to 2. When the mono mode is selected,
slot 0 data are duplicated on slot 1 when the audio
block operates as a transmitter. In reception mode,
the slot1 is discarded and only the data received
from slot 0 are stored. Refer to Section: Mono/stereo
mode for more details.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OUTDRIV</name>
<description>Output drive. This bit is set and
cleared by software. Note: This bit has to be set
before enabling the audio block and after the audio
block configuration.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAIXEN</name>
<description>Audio block enable where x is A or B.
This bit is set by software. To switch off the audio
block, the application software must program this bit
to 0 and poll the bit till it reads back 0, meaning
that the block is completely disabled. Before setting
this bit to 1, check that it is set to 0, otherwise
the enable command will not be taken into account.
This bit allows to control the state of SAIx audio
block. If it is disabled when an audio frame transfer
is ongoing, the ongoing transfer completes and the
cell is fully disabled at the end of this audio frame
transfer. Note: When SAIx block is configured in
master mode, the clock must be present on the input
of SAIx before setting SAIXEN bit.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA enable. This bit is set and cleared
by software. Note: Since the audio block defaults to
operate as a transmitter after reset, the MODE[1:0]
bits must be configured before setting DMAEN to avoid
a DMA request in receiver mode.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOMCK</name>
<description>No divider</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCKDIV</name>
<description>Master clock divider. These bits are set
and cleared by software. These bits are meaningless
when the audio block operates in slave mode. They
have to be configured when the audio block is
disabled. Others: the master clock frequency is
calculated accordingly to the following
formula:</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>OSR</name>
<description>Oversampling ratio for master
clock</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_BCR2</name>
<displayName>SAI_BCR2</displayName>
<description>Configuration register 2</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FTH</name>
<description>FIFO threshold. This bit is set and
cleared by software.</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FFLUSH</name>
<description>FIFO flush. This bit is set by software.
It is always read as 0. This bit should be configured
when the SAI is disabled.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TRIS</name>
<description>Tristate management on data line. This
bit is set and cleared by software. It is meaningful
only if the audio block is configured as a
transmitter. This bit is not used when the audio
block is configured in SPDIF mode. It should be
configured when SAI is disabled. Refer to Section:
Output data line management on an inactive slot for
more details.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MUTE</name>
<description>Mute. This bit is set and cleared by
software. It is meaningful only when the audio block
operates as a transmitter. The MUTE value is linked
to value of MUTEVAL if the number of slots is lower
or equal to 2, or equal to 0 if it is greater than 2.
Refer to Section: Mute mode for more details. Note:
This bit is meaningless and should not be used for
SPDIF audio blocks.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MUTEVAL</name>
<description>Mute value. This bit is set and cleared
by software.It must be written before enabling the
audio block: SAIXEN. This bit is meaningful only when
the audio block operates as a transmitter, the number
of slots is lower or equal to 2 and the MUTE bit is
set. If more slots are declared, the bit value sent
during the transmission in mute mode is equal to 0,
whatever the value of MUTEVAL. if the number of slot
is lower or equal to 2 and MUTEVAL = 1, the MUTE
value transmitted for each slot is the one sent
during the previous frame. Refer to Section: Mute
mode for more details. Note: This bit is meaningless
and should not be used for SPDIF audio
blocks.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MUTECNT</name>
<description>Mute counter. These bits are set and
cleared by software. They are used only in reception
mode. The value set in these bits is compared to the
number of consecutive mute frames detected in
reception. When the number of mute frames is equal to
this value, the flag MUTEDET will be set and an
interrupt will be generated if bit MUTEDETIE is set.
Refer to Section: Mute mode for more
details.</description>
<bitOffset>7</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPL</name>
<description>Complement bit. This bit is set and
cleared by software. It defines the type of
complement to be used for companding mode Note: This
bit has effect only when the companding mode is -Law
algorithm or A-Law algorithm.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COMP</name>
<description>Companding mode. These bits are set and
cleared by software. The -Law and the A-Law log are a
part of the CCITT G.711 recommendation, the type of
complement that will be used depends on CPL bit. The
data expansion or data compression are determined by
the state of bit MODE[0]. The data compression is
applied if the audio block is configured as a
transmitter. The data expansion is automatically
applied when the audio block is configured as a
receiver. Refer to Section: Companding mode for more
details. Note: Companding mode is applicable only
when TDM is selected.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SAI_BFRCR</name>
<displayName>SAI_BFRCR</displayName>
<description>This register has no meaning in AC97 and
SPDIF audio protocol</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<resetValue>0x00000007</resetValue>
<fields>
<field>
<name>FRL</name>
<description>Frame length. These bits are set and
cleared by software. They define the audio frame
length expressed in number of SCK clock cycles: the
number of bits in the frame is equal to FRL[7:0] + 1.
The minimum number of bits to transfer in an audio
frame must be equal to 8, otherwise the audio block
will behaves in an unexpected way. This is the case
when the data size is 8 bits and only one slot 0 is
defined in NBSLOT[4:0] of SAI_xSLOTR register
(NBSLOT[3:0] = 0000). In master mode, if the master
clock (available on MCLK_x pin) is used, the frame
length should be aligned with a number equal to a
power of 2, ranging from 8 to 256. When the master
clock is not used (NODIV = 1), it is recommended to
program the frame length to an value ranging from 8
to 256. These bits are meaningless and are not used
in AC97 or SPDIF audio block
configuration.</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSALL</name>
<description>Frame synchronization active level
length. These bits are set and cleared by software.
They specify the length in number of bit clock (SCK)
+ 1 (FSALL[6:0] + 1) of the active level of the FS
signal in the audio frame These bits are meaningless
and are not used in AC97 or SPDIF audio block
configuration. They must be configured when the audio
block is disabled.</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSDEF</name>
<description>Frame synchronization definition. This
bit is set and cleared by software. When the bit is
set, the number of slots defined in the SAI_xSLOTR
register has to be even. It means that half of this
number of slots will be dedicated to the left channel
and the other slots for the right channel (e.g: this
bit has to be set for I2S or MSB/LSB-justified
protocols...). This bit is meaningless and is not
used in AC97 or SPDIF audio block configuration. It
must be configured when the audio block is
disabled.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FSPOL</name>
<description>Frame synchronization polarity. This bit
is set and cleared by software. It is used to
configure the level of the start of frame on the FS
signal. It is meaningless and is not used in AC97 or
SPDIF audio block configuration. This bit must be
configured when the audio block is
disabled.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOFF</name>
<description>Frame synchronization offset. This bit
is set and cleared by software. It is meaningless and
is not used in AC97 or SPDIF audio block
configuration. This bit must be configured when the
audio block is disabled.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SAI_BSLOTR</name>
<displayName>SAI_BSLOTR</displayName>
<description>This register has no meaning in AC97 and
SPDIF audio protocol</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FBOFF</name>
<description>First bit offset These bits are set and
cleared by software. The value set in this bitfield
defines the position of the first data transfer bit
in the slot. It represents an offset value. In
transmission mode, the bits outside the data field
are forced to 0. In reception mode, the extra
received bits are discarded. These bits must be set
when the audio block is disabled. They are ignored in
AC97 or SPDIF mode.</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SLOTSZ</name>
<description>Slot size This bits is set and cleared
by software. The slot size must be higher or equal to
the data size. If this condition is not respected,
the behavior of the SAI will be undetermined. Refer
to Section: Output data line management on an
inactive slot for information on how to drive SD
line. These bits must be set when the audio block is
disabled. They are ignored in AC97 or SPDIF
mode.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NBSLOT</name>
<description>Number of slots in an audio frame. These
bits are set and cleared by software. The value set
in this bitfield represents the number of slots + 1
in the audio frame (including the number of inactive
slots). The maximum number of slots is 16. The number
of slots should be even if FSDEF bit in the SAI_xFRCR
register is set. The number of slots must be
configured when the audio block is disabled. They are
ignored in AC97 or SPDIF mode.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SLOTEN</name>
<description>Slot enable. These bits are set and
cleared by software. Each SLOTEN bit corresponds to a
slot position from 0 to 15 (maximum 16 slots). The
slot must be enabled when the audio block is
disabled. They are ignored in AC97 or SPDIF
mode.</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_BIM</name>
<displayName>SAI_BIM</displayName>
<description>Interrupt mask register 2</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVRUDRIE</name>
<description>Overrun/underrun interrupt enable. This
bit is set and cleared by software. When this bit is
set, an interrupt is generated if the OVRUDR bit in
the SAI_xSR register is set.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUTEDETIE</name>
<description>Mute detection interrupt enable. This
bit is set and cleared by software. When this bit is
set, an interrupt is generated if the MUTEDET bit in
the SAI_xSR register is set. This bit has a meaning
only if the audio block is configured in receiver
mode.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WCKCFGIE</name>
<description>Wrong clock configuration interrupt
enable. This bit is set and cleared by software. This
bit is taken into account only if the audio block is
configured as a master (MODE[1] = 0) and NODIV = 0.
It generates an interrupt if the WCKCFG flag in the
SAI_xSR register is set. Note: This bit is used only
in TDM mode and is meaningless in other
modes.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQIE</name>
<description>FIFO request interrupt enable. This bit
is set and cleared by software. When this bit is set,
an interrupt is generated if the FREQ bit in the
SAI_xSR register is set. Since the audio block
defaults to operate as a transmitter after reset, the
MODE bit must be configured before setting FREQIE to
avoid a parasitic interruption in receiver
mode,</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNRDYIE</name>
<description>Codec not ready interrupt enable (AC97).
This bit is set and cleared by software. When the
interrupt is enabled, the audio block detects in the
slot 0 (tag0) of the AC97 frame if the Codec
connected to this line is ready or not. If it is not
ready, the CNRDY flag in the SAI_xSR register is set
and an interruption i generated. This bit has a
meaning only if the AC97 mode is selected through
PRTCFG[1:0] bits and the audio block is operates as a
receiver.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AFSDETIE</name>
<description>Anticipated frame synchronization
detection interrupt enable. This bit is set and
cleared by software. When this bit is set, an
interrupt will be generated if the AFSDET bit in the
SAI_xSR register is set. This bit is meaningless in
AC97, SPDIF mode or when the audio block operates as
a master.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LFSDETIE</name>
<description>Late frame synchronization detection
interrupt enable. This bit is set and cleared by
software. When this bit is set, an interrupt will be
generated if the LFSDET bit is set in the SAI_xSR
register. This bit is meaningless in AC97, SPDIF mode
or when the audio block operates as a
master.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_BSR</name>
<displayName>SAI_BSR</displayName>
<description>Status register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000008</resetValue>
<fields>
<field>
<name>OVRUDR</name>
<description>Overrun / underrun. This bit is read
only. The overrun and underrun conditions can occur
only when the audio block is configured as a receiver
and a transmitter, respectively. It can generate an
interrupt if OVRUDRIE bit is set in SAI_xIM register.
This flag is cleared when the software sets COVRUDR
bit in SAI_xCLRFR register.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUTEDET</name>
<description>Mute detection. This bit is read only.
This flag is set if consecutive 0 values are received
in each slot of a given audio frame and for a
consecutive number of audio frames (set in the
MUTECNT bit in the SAI_xCR2 register). It can
generate an interrupt if MUTEDETIE bit is set in
SAI_xIM register. This flag is cleared when the
software sets bit CMUTEDET in the SAI_xCLRFR
register.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WCKCFG</name>
<description>Wrong clock configuration flag. This bit
is read only. This bit is used only when the audio
block operates in master mode (MODE[1] = 0) and NODIV
= 0. It can generate an interrupt if WCKCFGIE bit is
set in SAI_xIM register. This flag is cleared when
the software sets CWCKCFG bit in SAI_xCLRFR
register.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQ</name>
<description>FIFO request. This bit is read only. The
request depends on the audio block configuration: If
the block is configured in transmission mode, the
FIFO request is related to a write request operation
in the SAI_xDR. If the block configured in reception,
the FIFO request related to a read request operation
from the SAI_xDR. This flag can generate an interrupt
if FREQIE bit is set in SAI_xIM
register.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNRDY</name>
<description>Codec not ready. This bit is read only.
This bit is used only when the AC97 audio protocol is
selected in the SAI_xCR1 register and configured in
receiver mode. It can generate an interrupt if
CNRDYIE bit is set in SAI_xIM register. This flag is
cleared when the software sets CCNRDY bit in
SAI_xCLRFR register.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AFSDET</name>
<description>Anticipated frame synchronization
detection. This bit is read only. This flag can be
set only if the audio block is configured in slave
mode. It is not used in AC97or SPDIF mode. It can
generate an interrupt if AFSDETIE bit is set in
SAI_xIM register. This flag is cleared when the
software sets CAFSDET bit in SAI_xCLRFR
register.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LFSDET</name>
<description>Late frame synchronization detection.
This bit is read only. This flag can be set only if
the audio block is configured in slave mode. It is
not used in AC97 or SPDIF mode. It can generate an
interrupt if LFSDETIE bit is set in the SAI_xIM
register. This flag is cleared when the software sets
bit CLFSDET in SAI_xCLRFR register</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLVL</name>
<description>FIFO level threshold. This bit is read
only. The FIFO level threshold flag is managed only
by hardware and its setting depends on SAI block
configuration (transmitter or receiver mode). If the
SAI block is configured as transmitter: If SAI block
is configured as receiver:</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_BCLRFR</name>
<displayName>SAI_BCLRFR</displayName>
<description>Clear flag register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVRUDR</name>
<description>Clear overrun / underrun. This bit is
write only. Programming this bit to 1 clears the
OVRUDR flag in the SAI_xSR register. Reading this bit
always returns the value 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMUTEDET</name>
<description>Mute detection flag. This bit is write
only. Programming this bit to 1 clears the MUTEDET
flag in the SAI_xSR register. Reading this bit always
returns the value 0.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CWCKCFG</name>
<description>Clear wrong clock configuration flag.
This bit is write only. Programming this bit to 1
clears the WCKCFG flag in the SAI_xSR register. This
bit is used only when the audio block is set as
master (MODE[1] = 0) and NODIV = 0 in the SAI_xCR1
register. Reading this bit always returns the value
0.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCNRDY</name>
<description>Clear Codec not ready flag. This bit is
write only. Programming this bit to 1 clears the
CNRDY flag in the SAI_xSR register. This bit is used
only when the AC97 audio protocol is selected in the
SAI_xCR1 register. Reading this bit always returns
the value 0.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAFSDET</name>
<description>Clear anticipated frame synchronization
detection flag. This bit is write only. Programming
this bit to 1 clears the AFSDET flag in the SAI_xSR
register. It is not used in AC97or SPDIF mode.
Reading this bit always returns the value
0.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLFSDET</name>
<description>Clear late frame synchronization
detection flag. This bit is write only. Programming
this bit to 1 clears the LFSDET flag in the SAI_xSR
register. This bit is not used in AC97or SPDIF mode
Reading this bit always returns the value
0.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_BDR</name>
<displayName>SAI_BDR</displayName>
<description>Data register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data A write to this register loads the
FIFO provided the FIFO is not full. A read from this
register empties the FIFO if the FIFO is not
empty.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_PDMCR</name>
<displayName>SAI_PDMCR</displayName>
<description>PDM control register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PDMEN</name>
<description>PDM enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MICNBR</name>
<description>Number of microphones</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKEN1</name>
<description>Clock enable of bitstream clock number
1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN2</name>
<description>Clock enable of bitstream clock number
2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN3</name>
<description>Clock enable of bitstream clock number
3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN4</name>
<description>Clock enable of bitstream clock number
4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAI_PDMDLY</name>
<displayName>SAI_PDMDLY</displayName>
<description>PDM delay register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYM1L</name>
<description>Delay line adjust for first microphone
of pair 1</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM1R</name>
<description>Delay line adjust for second microphone
of pair 1</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM2L</name>
<description>Delay line for first microphone of pair
2</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM2R</name>
<description>Delay line for second microphone of pair
2</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM3L</name>
<description>Delay line for first microphone of pair
3</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM3R</name>
<description>Delay line for second microphone of pair
3</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM4L</name>
<description>Delay line for first microphone of pair
4</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYM4R</name>
<description>Delay line for second microphone of pair
4</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="SAI4">
<name>SAI1</name>
<baseAddress>0x40015800</baseAddress>
<interrupt>
<name>SAI1</name>
<description>SAI1 global interrupt</description>
<value>87</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SAI4">
<name>SAI2</name>
<baseAddress>0x40015C00</baseAddress>
<interrupt>
<name>SAI2</name>
<description>SAI2 global interrupt</description>
<value>91</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SAI4">
<name>SAI3</name>
<baseAddress>0x40016000</baseAddress>
<interrupt>
<name>SAI3</name>
<description>SAI3 global interrupt</description>
<value>114</value>
</interrupt>
</peripheral>
<peripheral>
<name>SDMMC1</name>
<description>SDMMC1</description>
<groupName>SDMMC</groupName>
<baseAddress>0x52007000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x3FD</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SDMMC1</name>
<description>SDMMC global interrupt</description>
<value>49</value>
</interrupt>
<interrupt>
<name>SDMMC</name>
<description>SDMMC global interrupt</description>
<value>124</value>
</interrupt>
<registers>
<register>
<name>POWER</name>
<displayName>POWER</displayName>
<description>SDMMC power control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PWRCTRL</name>
<description>SDMMC state control bits. These bits can
only be written when the SDMMC is not in the power-on
state (PWRCTRL?11). These bits are used to define the
functional state of the SDMMC signals: Any further
write will be ignored, PWRCTRL value will keep
11.</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>VSWITCH</name>
<description>Voltage switch sequence start. This bit
is used to start the timing critical section of the
voltage switch sequence:</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSWITCHEN</name>
<description>Voltage switch procedure enable. This
bit can only be written by firmware when CPSM is
disabled (CPSMEN = 0). This bit is used to stop the
SDMMC_CK after the voltage switch command
response:</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIRPOL</name>
<description>Data and command direction signals
polarity selection. This bit can only be written when
the SDMMC is in the power-off state (PWRCTRL =
00).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLKCR</name>
<displayName>CLKCR</displayName>
<description>The SDMMC_CLKCR register controls the
SDMMC_CK output clock, the SDMMC_RX_CLK receive clock,
and the bus width.</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLKDIV</name>
<description>Clock divide factor This bit can only be
written when the CPSM and DPSM are not active
(CPSMACT = 0 and DPSMACT = 0). This field defines the
divide factor between the input clock (SDMMCCLK) and
the output clock (SDMMC_CK): SDMMC_CK frequency =
SDMMCCLK / [2 * CLKDIV]. 0xx: etc.. xxx:
etc..</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>PWRSAV</name>
<description>Power saving configuration bit This bit
can only be written when the CPSM and DPSM are not
active (CPSMACT = 0 and DPSMACT = 0) For power
saving, the SDMMC_CK clock output can be disabled
when the bus is idle by setting PWRSAV:</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIDBUS</name>
<description>Wide bus mode enable bit This bit can
only be written when the CPSM and DPSM are not active
(CPSMACT = 0 and DPSMACT = 0)</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NEGEDGE</name>
<description>SDMMC_CK dephasing selection bit for
data and Command. This bit can only be written when
the CPSM and DPSM are not active (CPSMACT = 0 and
DPSMACT = 0). When clock division = 1 (CLKDIV = 0),
this bit has no effect. Data and Command change on
SDMMC_CK falling edge. When clock division &gt;1
(CLKDIV &gt; 0) &amp; DDR = 0: - SDMMC_CK
edge occurs on SDMMCCLK rising edge. When clock
division >1 (CLKDIV > 0) & DDR = 1: - Data
changed on the SDMMCCLK falling edge succeeding a
SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK
rising edge. - Data changed on the SDMMC_CK falling
edge succeeding a SDMMC_CK edge. - SDMMC_CK edge
occurs on SDMMCCLK rising edge.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HWFC_EN</name>
<description>Hardware flow control enable This bit
can only be written when the CPSM and DPSM are not
active (CPSMACT = 0 and DPSMACT = 0) When Hardware
flow control is enabled, the meaning of the TXFIFOE
and RXFIFOF flags change, please see SDMMC status
register definition in Section56.8.11.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDR</name>
<description>Data rate signaling selection This bit
can only be written when the CPSM and DPSM are not
active (CPSMACT = 0 and DPSMACT = 0) DDR rate shall
only be selected with 4-bit or 8-bit wide bus mode.
(WIDBUS &gt; 00). DDR = 1 has no effect when
WIDBUS = 00 (1-bit wide bus). DDR rate shall only be
selected with clock division &gt;1. (CLKDIV
&gt; 0)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSSPEED</name>
<description>Bus speed mode selection between DS, HS,
SDR12, SDR25 and SDR50, DDR50, SDR104. This bit can
only be written when the CPSM and DPSM are not active
(CPSMACT = 0 and DPSMACT = 0)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SELCLKRX</name>
<description>Receive clock selection. These bits can
only be written when the CPSM and DPSM are not active
(CPSMACT = 0 and DPSMACT = 0)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARGR</name>
<displayName>ARGR</displayName>
<description>The SDMMC_ARGR register contains a 32-bit
command argument, which is sent to a card as part of a
command message.</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMDARG</name>
<description>Command argument. These bits can only be
written by firmware when CPSM is disabled (CPSMEN =
0). Command argument sent to a card as part of a
command message. If a command contains an argument,
it must be loaded into this register before writing a
command to the command register.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMDR</name>
<displayName>CMDR</displayName>
<description>The SDMMC_CMDR register contains the command
index and command type bits. The command index is sent to
a card as part of a command message. The command type
bits control the command path state machine
(CPSM).</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMDINDEX</name>
<description>Command index. This bit can only be
written by firmware when CPSM is disabled (CPSMEN =
0). The command index is sent to the card as part of
a command message.</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>CMDTRANS</name>
<description>The CPSM treats the command as a data
transfer command, stops the interrupt period, and
signals DataEnable to the DPSM This bit can only be
written by firmware when CPSM is disabled (CPSMEN =
0). If this bit is set, the CPSM issues an end of
interrupt period and issues DataEnable signal to the
DPSM when the command is sent.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDSTOP</name>
<description>The CPSM treats the command as a Stop
Transmission command and signals Abort to the DPSM.
This bit can only be written by firmware when CPSM is
disabled (CPSMEN = 0). If this bit is set, the CPSM
issues the Abort signal to the DPSM when the command
is sent.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITRESP</name>
<description>Wait for response bits. This bit can
only be written by firmware when CPSM is disabled
(CPSMEN = 0). They are used to configure whether the
CPSM is to wait for a response, and if yes, which
kind of response.</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WAITINT</name>
<description>CPSM waits for interrupt request. If
this bit is set, the CPSM disables command timeout
and waits for an card interrupt request (Response).
If this bit is cleared in the CPSM Wait state, will
cause the abort of the interrupt mode.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITPEND</name>
<description>CPSM Waits for end of data transfer
(CmdPend internal signal) from DPSM. This bit when
set, the CPSM waits for the end of data transfer
trigger before it starts sending a command. WAITPEND
is only taken into account when DTMODE = MMC stream
data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT
= 1 and DTDIR = from host to card.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPSMEN</name>
<description>Command path state machine (CPSM) Enable
bit This bit is written 1 by firmware, and cleared by
hardware when the CPSM enters the Idle state. If this
bit is set, the CPSM is enabled. When DTEN = 1, no
command will be transfered nor boot procedure will be
started. CPSMEN is cleared to 0.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTHOLD</name>
<description>Hold new data block transmission and
reception in the DPSM. If this bit is set, the DPSM
will not move from the Wait_S state to the Send state
or from the Wait_R state to the Receive
state.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOTMODE</name>
<description>Select the boot mode procedure to be
used. This bit can only be written by firmware when
CPSM is disabled (CPSMEN = 0)</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOTEN</name>
<description>Enable boot mode
procedure.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDSUSPEND</name>
<description>The CPSM treats the command as a Suspend
or Resume command and signals interrupt period
start/end. This bit can only be written by firmware
when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1
and CMDTRANS = 0 Suspend command, start interrupt
period when response bit BS=0. CMDSUSPEND = 1 and
CMDTRANS = 1 Resume command with data, end interrupt
period when response bit DF=1.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESP1R</name>
<displayName>RESP1R</displayName>
<description>The SDMMC_RESP1/2/3/4R registers contain the
status of a card, which is part of the received
response.</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CARDSTATUS1</name>
<description>see Table 432</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESP2R</name>
<displayName>RESP2R</displayName>
<description>The SDMMC_RESP1/2/3/4R registers contain the
status of a card, which is part of the received
response.</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CARDSTATUS2</name>
<description>see Table404.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESP3R</name>
<displayName>RESP3R</displayName>
<description>The SDMMC_RESP1/2/3/4R registers contain the
status of a card, which is part of the received
response.</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CARDSTATUS3</name>
<description>see Table404.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESP4R</name>
<displayName>RESP4R</displayName>
<description>The SDMMC_RESP1/2/3/4R registers contain the
status of a card, which is part of the received
response.</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CARDSTATUS4</name>
<description>see Table404.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DTIMER</name>
<displayName>DTIMER</displayName>
<description>The SDMMC_DTIMER register contains the data
timeout period, in card bus clock periods. A counter
loads the value from the SDMMC_DTIMER register, and
starts decrementing when the data path state machine
(DPSM) enters the Wait_R or Busy state. If the timer
reaches 0 while the DPSM is in either of these states,
the timeout status flag is set.</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATATIME</name>
<description>Data and R1b busy timeout period This
bit can only be written when the CPSM and DPSM are
not active (CPSMACT = 0 and DPSMACT = 0). Data and
R1b busy timeout period expressed in card bus clock
periods.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DLENR</name>
<displayName>DLENR</displayName>
<description>The SDMMC_DLENR register contains the number
of data bytes to be transferred. The value is loaded into
the data counter when data transfer starts.</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATALENGTH</name>
<description>Data length value This register can only
be written by firmware when DPSM is inactive (DPSMACT
= 0). Number of data bytes to be transferred. When
DDR = 1 DATALENGTH is truncated to a multiple of 2.
(The last odd byte is not transfered) When DATALENGTH
= 0 no data will be transfered, when requested by a
CPSMEN and CMDTRANS = 1 also no command will be
transfered. DTEN and CPSMEN are cleared to
0.</description>
<bitOffset>0</bitOffset>
<bitWidth>25</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCTRL</name>
<displayName>DCTRL</displayName>
<description>The SDMMC_DCTRL register control the data
path state machine (DPSM).</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTEN</name>
<description>Data transfer enable bit This bit can
only be written by firmware when DPSM is inactive
(DPSMACT = 0). This bit is cleared by Hardware when
data transfer completes. This bit shall only be used
to transfer data when no associated data transfer
command is used, i.e. shall not be used with SD or
eMMC cards.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTDIR</name>
<description>Data transfer direction selection This
bit can only be written by firmware when DPSM is
inactive (DPSMACT = 0).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTMODE</name>
<description>Data transfer mode selection. This bit
can only be written by firmware when DPSM is inactive
(DPSMACT = 0).</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DBLOCKSIZE</name>
<description>Data block size This bit can only be
written by firmware when DPSM is inactive (DPSMACT =
0). Define the data block length when the block data
transfer mode is selected: When DATALENGTH is not a
multiple of DBLOCKSIZE, the transfered data is
truncated at a multiple of DBLOCKSIZE. (Any remain
data will not be transfered.) When DDR = 1,
DBLOCKSIZE = 0000 shall not be used. (No data will be
transfered)</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RWSTART</name>
<description>Read wait start. If this bit is set,
read wait operation starts.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RWSTOP</name>
<description>Read wait stop This bit is written by
firmware and auto cleared by hardware when the DPSM
moves from the READ_WAIT state to the WAIT_R or IDLE
state.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RWMOD</name>
<description>Read wait mode. This bit can only be
written by firmware when DPSM is inactive (DPSMACT =
0).</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDIOEN</name>
<description>SD I/O interrupt enable functions This
bit can only be written by firmware when DPSM is
inactive (DPSMACT = 0). If this bit is set, the DPSM
enables the SD I/O card specific interrupt
operation.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOTACKEN</name>
<description>Enable the reception of the boot
acknowledgment. This bit can only be written by
firmware when DPSM is inactive (DPSMACT =
0).</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FIFORST</name>
<description>FIFO reset, will flush any remaining
data. This bit can only be written by firmware when
IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit
will only take effect when a transfer error or
transfer hold occurs.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCNTR</name>
<displayName>DCNTR</displayName>
<description>The SDMMC_DCNTR register loads the value
from the data length register (see SDMMC_DLENR) when the
DPSM moves from the Idle state to the Wait_R or Wait_S
state. As data is transferred, the counter decrements the
value until it reaches 0. The DPSM then moves to the Idle
state and when there has been no error, the data status
end flag (DATAEND) is set.</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATACOUNT</name>
<description>Data count value When read, the number
of remaining data bytes to be transferred is
returned. Write has no effect.</description>
<bitOffset>0</bitOffset>
<bitWidth>25</bitWidth>
</field>
</fields>
</register>
<register>
<name>STAR</name>
<displayName>STAR</displayName>
<description>The SDMMC_STAR register is a read-only
register. It contains two types of flag:Static flags
(bits [29,21,11:0]): these bits remain asserted until
they are cleared by writing to the SDMMC interrupt Clear
register (see SDMMC_ICR)Dynamic flags (bits [20:12]):
these bits change state depending on the state of the
underlying logic (for example, FIFO full and empty flags
are asserted and de-asserted as data while written to the
FIFO)</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCRCFAIL</name>
<description>Command response received (CRC check
failed). Interrupt flag is cleared by writing
corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCRCFAIL</name>
<description>Data block sent/received (CRC check
failed). Interrupt flag is cleared by writing
corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTIMEOUT</name>
<description>Command response timeout. Interrupt flag
is cleared by writing corresponding interrupt clear
bit in SDMMC_ICR. The Command Timeout period has a
fixed value of 64 SDMMC_CK clock
periods.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIMEOUT</name>
<description>Data timeout. Interrupt flag is cleared
by writing corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUNDERR</name>
<description>Transmit FIFO underrun error or IDMA
read transfer error. Interrupt flag is cleared by
writing corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVERR</name>
<description>Received FIFO overrun error or IDMA
write transfer error. Interrupt flag is cleared by
writing corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDREND</name>
<description>Command response received (CRC check
passed, or no CRC). Interrupt flag is cleared by
writing corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDSENT</name>
<description>Command sent (no response required).
Interrupt flag is cleared by writing corresponding
interrupt clear bit in SDMMC_ICR.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAEND</name>
<description>Data transfer ended correctly. (data
counter, DATACOUNT is zero and no errors occur).
Interrupt flag is cleared by writing corresponding
interrupt clear bit in SDMMC_ICR.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DHOLD</name>
<description>Data transfer Hold. Interrupt flag is
cleared by writing corresponding interrupt clear bit
in SDMMC_ICR.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBCKEND</name>
<description>Data block sent/received. (CRC check
passed) and DPSM moves to the READWAIT state.
Interrupt flag is cleared by writing corresponding
interrupt clear bit in SDMMC_ICR.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DABORT</name>
<description>Data transfer aborted by CMD12.
Interrupt flag is cleared by writing corresponding
interrupt clear bit in SDMMC_ICR.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPSMACT</name>
<description>Data path state machine active, i.e. not
in Idle state. This is a hardware status flag only,
does not generate an interrupt.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPSMACT</name>
<description>Command path state machine active, i.e.
not in Idle state. This is a hardware status flag
only, does not generate an interrupt.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFIFOHE</name>
<description>Transmit FIFO half empty At least half
the number of words can be written into the FIFO.
This bit is cleared when the FIFO becomes half+1
full.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFIFOHF</name>
<description>Receive FIFO half full There are at
least half the number of words in the FIFO. This bit
is cleared when the FIFO becomes half+1
empty.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFIFOF</name>
<description>Transmit FIFO full This is a hardware
status flag only, does not generate an interrupt.
This bit is cleared when one FIFO location becomes
empty.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFIFOF</name>
<description>Receive FIFO full This bit is cleared
when one FIFO location becomes empty.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFIFOE</name>
<description>Transmit FIFO empty This bit is cleared
when one FIFO location becomes full.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFIFOE</name>
<description>Receive FIFO empty This is a hardware
status flag only, does not generate an interrupt.
This bit is cleared when one FIFO location becomes
full.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYD0</name>
<description>Inverted value of SDMMC_D0 line (Busy),
sampled at the end of a CMD response and a second
time 2 SDMMC_CK cycles after the CMD response. This
bit is reset to not busy when the SDMMCD0 line
changes from busy to not busy. This bit does not
signal busy due to data transfer. This is a hardware
status flag only, it does not generate an
interrupt.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYD0END</name>
<description>end of SDMMC_D0 Busy following a CMD
response detected. This indicates only end of busy
following a CMD response. This bit does not signal
busy due to data transfer. Interrupt flag is cleared
by writing corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDIOIT</name>
<description>SDIO interrupt received. Interrupt flag
is cleared by writing corresponding interrupt clear
bit in SDMMC_ICR.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKFAIL</name>
<description>Boot acknowledgment received (boot
acknowledgment check fail). Interrupt flag is cleared
by writing corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKTIMEOUT</name>
<description>Boot acknowledgment timeout. Interrupt
flag is cleared by writing corresponding interrupt
clear bit in SDMMC_ICR.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSWEND</name>
<description>Voltage switch critical timing section
completion. Interrupt flag is cleared by writing
corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSTOP</name>
<description>SDMMC_CK stopped in Voltage switch
procedure. Interrupt flag is cleared by writing
corresponding interrupt clear bit in
SDMMC_ICR.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMATE</name>
<description>IDMA transfer error. Interrupt flag is
cleared by writing corresponding interrupt clear bit
in SDMMC_ICR.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMABTC</name>
<description>IDMA buffer transfer complete. interrupt
flag is cleared by writing corresponding interrupt
clear bit in SDMMC_ICR.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>The SDMMC_ICR register is a write-only
register. Writing a bit with 1 clears the corresponding
bit in the SDMMC_STAR status register.</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCRCFAILC</name>
<description>CCRCFAIL flag clear bit Set by software
to clear the CCRCFAIL flag.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCRCFAILC</name>
<description>DCRCFAIL flag clear bit Set by software
to clear the DCRCFAIL flag.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTIMEOUTC</name>
<description>CTIMEOUT flag clear bit Set by software
to clear the CTIMEOUT flag.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIMEOUTC</name>
<description>DTIMEOUT flag clear bit Set by software
to clear the DTIMEOUT flag.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUNDERRC</name>
<description>TXUNDERR flag clear bit Set by software
to clear TXUNDERR flag.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVERRC</name>
<description>RXOVERR flag clear bit Set by software
to clear the RXOVERR flag.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDRENDC</name>
<description>CMDREND flag clear bit Set by software
to clear the CMDREND flag.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDSENTC</name>
<description>CMDSENT flag clear bit Set by software
to clear the CMDSENT flag.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAENDC</name>
<description>DATAEND flag clear bit Set by software
to clear the DATAEND flag.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DHOLDC</name>
<description>DHOLD flag clear bit Set by software to
clear the DHOLD flag.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBCKENDC</name>
<description>DBCKEND flag clear bit Set by software
to clear the DBCKEND flag.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DABORTC</name>
<description>DABORT flag clear bit Set by software to
clear the DABORT flag.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYD0ENDC</name>
<description>BUSYD0END flag clear bit Set by software
to clear the BUSYD0END flag.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDIOITC</name>
<description>SDIOIT flag clear bit Set by software to
clear the SDIOIT flag.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKFAILC</name>
<description>ACKFAIL flag clear bit Set by software
to clear the ACKFAIL flag.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKTIMEOUTC</name>
<description>ACKTIMEOUT flag clear bit Set by
software to clear the ACKTIMEOUT flag.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSWENDC</name>
<description>VSWEND flag clear bit Set by software to
clear the VSWEND flag.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSTOPC</name>
<description>CKSTOP flag clear bit Set by software to
clear the CKSTOP flag.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMATEC</name>
<description>IDMA transfer error clear bit Set by
software to clear the IDMATE flag.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMABTCC</name>
<description>IDMA buffer transfer complete clear bit
Set by software to clear the IDMABTC
flag.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MASKR</name>
<displayName>MASKR</displayName>
<description>The interrupt mask register determines which
status flags generate an interrupt request by setting the
corresponding bit to 1.</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCRCFAILIE</name>
<description>Command CRC fail interrupt enable Set
and cleared by software to enable/disable interrupt
caused by command CRC failure.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCRCFAILIE</name>
<description>Data CRC fail interrupt enable Set and
cleared by software to enable/disable interrupt
caused by data CRC failure.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTIMEOUTIE</name>
<description>Command timeout interrupt enable Set and
cleared by software to enable/disable interrupt
caused by command timeout.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIMEOUTIE</name>
<description>Data timeout interrupt enable Set and
cleared by software to enable/disable interrupt
caused by data timeout.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUNDERRIE</name>
<description>Tx FIFO underrun error interrupt enable
Set and cleared by software to enable/disable
interrupt caused by Tx FIFO underrun
error.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVERRIE</name>
<description>Rx FIFO overrun error interrupt enable
Set and cleared by software to enable/disable
interrupt caused by Rx FIFO overrun
error.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDRENDIE</name>
<description>Command response received interrupt
enable Set and cleared by software to enable/disable
interrupt caused by receiving command
response.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMDSENTIE</name>
<description>Command sent interrupt enable Set and
cleared by software to enable/disable interrupt
caused by sending command.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAENDIE</name>
<description>Data end interrupt enable Set and
cleared by software to enable/disable interrupt
caused by data end.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DHOLDIE</name>
<description>Data hold interrupt enable Set and
cleared by software to enable/disable the interrupt
generated when sending new data is hold in the DPSM
Wait_S state.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBCKENDIE</name>
<description>Data block end interrupt enable Set and
cleared by software to enable/disable interrupt
caused by data block end.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DABORTIE</name>
<description>Data transfer aborted interrupt enable
Set and cleared by software to enable/disable
interrupt caused by a data transfer being
aborted.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFIFOHEIE</name>
<description>Tx FIFO half empty interrupt enable Set
and cleared by software to enable/disable interrupt
caused by Tx FIFO half empty.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFIFOHFIE</name>
<description>Rx FIFO half full interrupt enable Set
and cleared by software to enable/disable interrupt
caused by Rx FIFO half full.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFIFOFIE</name>
<description>Rx FIFO full interrupt enable Set and
cleared by software to enable/disable interrupt
caused by Rx FIFO full.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFIFOEIE</name>
<description>Tx FIFO empty interrupt enable Set and
cleared by software to enable/disable interrupt
caused by Tx FIFO empty.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYD0ENDIE</name>
<description>BUSYD0END interrupt enable Set and
cleared by software to enable/disable the interrupt
generated when SDMMC_D0 signal changes from busy to
NOT busy following a CMD response.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDIOITIE</name>
<description>SDIO mode interrupt received interrupt
enable Set and cleared by software to enable/disable
the interrupt generated when receiving the SDIO mode
interrupt.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKFAILIE</name>
<description>Acknowledgment Fail interrupt enable Set
and cleared by software to enable/disable interrupt
caused by acknowledgment Fail.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKTIMEOUTIE</name>
<description>Acknowledgment timeout interrupt enable
Set and cleared by software to enable/disable
interrupt caused by acknowledgment
timeout.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSWENDIE</name>
<description>Voltage switch critical timing section
completion interrupt enable Set and cleared by
software to enable/disable the interrupt generated
when voltage switch critical timing section
completion.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSTOPIE</name>
<description>Voltage Switch clock stopped interrupt
enable Set and cleared by software to enable/disable
interrupt caused by Voltage Switch clock
stopped.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMABTCIE</name>
<description>IDMA buffer transfer complete interrupt
enable Set and cleared by software to enable/disable
the interrupt generated when the IDMA has transferred
all data belonging to a memory buffer.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ACKTIMER</name>
<displayName>ACKTIMER</displayName>
<description>The SDMMC_ACKTIMER register contains the
acknowledgment timeout period, in SDMMC_CK bus clock
periods. A counter loads the value from the
SDMMC_ACKTIMER register, and starts decrementing when the
data path state machine (DPSM) enters the Wait_Ack state.
If the timer reaches 0 while the DPSM is in this states,
the acknowledgment timeout status flag is
set.</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ACKTIME</name>
<description>Boot acknowledgment timeout period This
bit can only be written by firmware when CPSM is
disabled (CPSMEN = 0). Boot acknowledgment timeout
period expressed in card bus clock
periods.</description>
<bitOffset>0</bitOffset>
<bitWidth>25</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDMACTRLR</name>
<displayName>IDMACTRLR</displayName>
<description>The receive and transmit FIFOs can be read
or written as 32-bit wide registers. The FIFOs contain 32
entries on 32 sequential addresses. This allows the CPU
to use its load and store multiple operands to read
from/write to the FIFO.</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDMAEN</name>
<description>IDMA enable This bit can only be written
by firmware when DPSM is inactive (DPSMACT =
0).</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMABMODE</name>
<description>Buffer mode selection. This bit can only
be written by firmware when DPSM is inactive (DPSMACT
= 0).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDMABACT</name>
<description>Double buffer mode active buffer
indication This bit can only be written by firmware
when DPSM is inactive (DPSMACT = 0). When IDMA is
enabled this bit is toggled by
hardware.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDMABSIZER</name>
<displayName>IDMABSIZER</displayName>
<description>The SDMMC_IDMABSIZER register contains the
buffers size when in double buffer
configuration.</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDMABNDT</name>
<description>Number of transfers per buffer. This
8-bit value shall be multiplied by 8 to get the size
of the buffer in 32-bit words and by 32 to get the
size of the buffer in bytes. Example: IDMABNDT =
0x01: buffer size = 8 words = 32 bytes. These bits
can only be written by firmware when DPSM is inactive
(DPSMACT = 0).</description>
<bitOffset>5</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDMABASE0R</name>
<displayName>IDMABASE0R</displayName>
<description>The SDMMC_IDMABASE0R register contains the
memory buffer base address in single buffer configuration
and the buffer 0 base address in double buffer
configuration.</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDMABASE0</name>
<description>Buffer 0 memory base address bits
[31:2], shall be word aligned (bit [1:0] are always 0
and read only). This register can be written by
firmware when DPSM is inactive (DPSMACT = 0), and can
dynamically be written by firmware when DPSM active
(DPSMACT = 1) and memory buffer 0 is inactive
(IDMABACT = 1).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDMABASE1R</name>
<displayName>IDMABASE1R</displayName>
<description>The SDMMC_IDMABASE1R register contains the
double buffer configuration second buffer memory base
address.</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDMABASE1</name>
<description>Buffer 1 memory base address, shall be
word aligned (bit [1:0] are always 0 and read only).
This register can be written by firmware when DPSM is
inactive (DPSMACT = 0), and can dynamically be
written by firmware when DPSM active (DPSMACT = 1)
and memory buffer 1 is inactive (IDMABACT =
0).</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FIFOR</name>
<displayName>FIFOR</displayName>
<description>The receive and transmit FIFOs can be only
read or written as word (32-bit) wide registers. The
FIFOs contain 16 entries on sequential addresses. This
allows the CPU to use its load and store multiple
operands to read from/write to the FIFO.When accessing
SDMMC_FIFOR with half word or byte access an AHB bus
fault is generated.</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIFODATA</name>
<description>Receive and transmit FIFO data This
register can only be read or written by firmware when
the DPSM is active (DPSMACT=1). The FIFO data
occupies 16 entries of 32-bit words.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>VER</name>
<displayName>VER</displayName>
<description>SDMMC IP version register</description>
<addressOffset>0x3F4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>MINREV</name>
<description>IP minor revision number.</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MAJREV</name>
<description>IP major revision number.</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>ID</name>
<displayName>ID</displayName>
<description>SDMMC IP identification
register</description>
<addressOffset>0x3F8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00140022</resetValue>
<fields>
<field>
<name>IP_ID</name>
<description>SDMMC IP identification.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESPCMDR</name>
<displayName>RESPCMDR</displayName>
<description>SDMMC command response
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0xA3C5DD01</resetValue>
<fields>
<field>
<name>RESPCMD</name>
<description>Response command index</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="SDMMC1">
<name>SDMMC2</name>
<baseAddress>0x48022400</baseAddress>
</peripheral>
<peripheral>
<name>VREFBUF</name>
<description>VREFBUF</description>
<groupName>VREFBUF</groupName>
<baseAddress>0x58003C00</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CSR</name>
<displayName>CSR</displayName>
<description>VREFBUF control and status
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<resetValue>0x00000002</resetValue>
<fields>
<field>
<name>ENVR</name>
<description>Voltage reference buffer mode enable
This bit is used to enable the voltage reference
buffer mode.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HIZ</name>
<description>High impedance mode This bit controls
the analog switch to connect or not the VREF+ pin.
Refer to Table196: VREF buffer modes for the mode
descriptions depending on ENVR bit
configuration.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VRR</name>
<description>Voltage reference buffer
ready</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VRS</name>
<description>Voltage reference scale These bits
select the value generated by the voltage reference
buffer. Other: Reserved</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<displayName>CCR</displayName>
<description>VREFBUF calibration control
register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRIM</name>
<description>Trimming code These bits are
automatically initialized after reset with the
trimming value stored in the Flash memory during the
production test. Writing into these bits allows to
tune the internal reference buffer
voltage.</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>IWDG</name>
<description>IWDG</description>
<groupName>IWDG</groupName>
<baseAddress>0x58004800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>KR</name>
<displayName>KR</displayName>
<description>Key register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY</name>
<description>Key value (write only, read 0x0000)
These bits must be written by software at regular
intervals with the key value 0xAAAA, otherwise the
watchdog generates a reset when the counter reaches
0. Writing the key value 0x5555 to enable access to
the IWDG_PR, IWDG_RLR and IWDG_WINR registers (see
Section23.3.6: Register access protection) Writing
the key value CCCCh starts the watchdog (except if
the hardware watchdog option is
selected)</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PR</name>
<displayName>PR</displayName>
<description>Prescaler register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PR</name>
<description>Prescaler divider These bits are write
access protected see Section23.3.6: Register access
protection. They are written by software to select
the prescaler divider feeding the counter clock. PVU
bit of IWDG_SR must be reset in order to be able to
change the prescaler divider. Note: Reading this
register returns the prescaler value from the VDD
voltage domain. This value may not be up to
date/valid if a write operation to this register is
ongoing. For this reason the value read from this
register is valid only when the PVU bit in the
IWDG_SR register is reset.</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>RLR</name>
<displayName>RLR</displayName>
<description>Reload register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000FFF</resetValue>
<fields>
<field>
<name>RL</name>
<description>Watchdog counter reload value These bits
are write access protected see Section23.3.6. They
are written by software to define the value to be
loaded in the watchdog counter each time the value
0xAAAA is written in the IWDG_KR register. The
watchdog counter counts down from this value. The
timeout period is a function of this value and the
clock prescaler. Refer to the datasheet for the
timeout information. The RVU bit in the IWDG_SR
register must be reset in order to be able to change
the reload value. Note: Reading this register returns
the reload value from the VDD voltage domain. This
value may not be up to date/valid if a write
operation to this register is ongoing on this
register. For this reason the value read from this
register is valid only when the RVU bit in the
IWDG_SR register is reset.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>Status register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PVU</name>
<description>Watchdog prescaler value update This bit
is set by hardware to indicate that an update of the
prescaler value is ongoing. It is reset by hardware
when the prescaler update operation is completed in
the VDD voltage domain (takes up to 5 RC 40 kHz
cycles). Prescaler value can be updated only when PVU
bit is reset.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RVU</name>
<description>Watchdog counter reload value update
This bit is set by hardware to indicate that an
update of the reload value is ongoing. It is reset by
hardware when the reload value update operation is
completed in the VDD voltage domain (takes up to 5 RC
40 kHz cycles). Reload value can be updated only when
RVU bit is reset.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WVU</name>
<description>Watchdog counter window value update
This bit is set by hardware to indicate that an
update of the window value is ongoing. It is reset by
hardware when the reload value update operation is
completed in the VDD voltage domain (takes up to 5 RC
40 kHz cycles). Window value can be updated only when
WVU bit is reset. This bit is generated only if
generic window = 1</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINR</name>
<displayName>WINR</displayName>
<description>Window register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000FFF</resetValue>
<fields>
<field>
<name>WIN</name>
<description>Watchdog counter window value These bits
are write access protected see Section23.3.6. These
bits contain the high limit of the window value to be
compared to the downcounter. To prevent a reset, the
downcounter must be reloaded when its value is lower
than the window register value and greater than 0x0
The WVU bit in the IWDG_SR register must be reset in
order to be able to change the reload value. Note:
Reading this register returns the reload value from
the VDD voltage domain. This value may not be valid
if a write operation to this register is ongoing. For
this reason the value read from this register is
valid only when the WVU bit in the IWDG_SR register
is reset.</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>WWDG</name>
<description>WWDG</description>
<groupName>WWDG</groupName>
<baseAddress>0x50003000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>WWDG1</name>
<description>Window Watchdog interrupt</description>
<value>0</value>
</interrupt>
<interrupt>
<name>WWDG1_RST</name>
<description>Window Watchdog interrupt</description>
<value>143</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>Control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000007F</resetValue>
<fields>
<field>
<name>T</name>
<description>7-bit counter (MSB to LSB) These bits
contain the value of the watchdog counter. It is
decremented every (4096 x 2WDGTB[1:0]) PCLK cycles. A
reset is produced when it is decremented from 0x40 to
0x3F (T6 becomes cleared).</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>WDGA</name>
<description>Activation bit This bit is set by
software and only cleared by hardware after a reset.
When WDGA=1, the watchdog can generate a
reset.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFR</name>
<displayName>CFR</displayName>
<description>Configuration register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000007F</resetValue>
<fields>
<field>
<name>W</name>
<description>7-bit window value These bits contain
the window value to be compared to the
downcounter.</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>WDGTB</name>
<description>Timer base The time base of the
prescaler can be modified as follows:</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EWI</name>
<description>Early wakeup interrupt When set, an
interrupt occurs whenever the counter reaches the
value 0x40. This interrupt is only cleared by
hardware after a reset.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>Status register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EWIF</name>
<description>Early wakeup interrupt flag This bit is
set by hardware when the counter has reached the
value 0x40. It must be cleared by software by writing
0. A write of 1 has no effect. This bit is also set
if the interrupt is not enabled.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PWR</name>
<description>PWR</description>
<groupName>PWR</groupName>
<baseAddress>0x58024800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>PWR control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xF000C000</resetValue>
<fields>
<field>
<name>LPDS</name>
<description>Low-power Deepsleep with SVOS3 (SVOS4
and SVOS5 always use low-power, regardless of the
setting of this bit)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PVDE</name>
<description>Programmable voltage detector
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLS</name>
<description>Programmable voltage detector level
selection These bits select the voltage threshold
detected by the PVD. Note: Refer to Section
Electrical characteristics of the product datasheet
for more details.</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DBP</name>
<description>Disable backup domain write protection
In reset state, the RCC_BDCR register, the RTC
registers (including the backup registers), BREN and
MOEN bits in PWR_CR2 register, are protected against
parasitic write access. This bit must be set to
enable write access to these registers.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLPS</name>
<description>Flash low-power mode in DStop mode This
bit allows to obtain the best trade-off between
low-power consumption and restart time when exiting
from DStop mode. When it is set, the Flash memory
enters low-power mode when D1 domain is in DStop
mode.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SVOS</name>
<description>System Stop mode voltage scaling
selection These bits control the VCORE voltage level
in system Stop mode, to obtain the best trade-off
between power consumption and
performance.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>AVDEN</name>
<description>Peripheral voltage monitor on VDDA
enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALS</name>
<description>Analog voltage detector level selection
These bits select the voltage threshold detected by
the AVD.</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CSR1</name>
<displayName>CSR1</displayName>
<description>PWR control status register 1</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00004000</resetValue>
<fields>
<field>
<name>PVDO</name>
<description>Programmable voltage detect output This
bit is set and cleared by hardware. It is valid only
if the PVD has been enabled by the PVDE bit. Note:
since the PVD is disabled in Standby mode, this bit
is equal to 0 after Standby or reset until the PVDE
bit is set.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTVOSRDY</name>
<description>Voltage levels ready bit for currently
used VOS and SDLEVEL This bit is set to 1 by hardware
when the voltage regulator and the SD converter are
both disabled and Bypass mode is selected in PWR
control register 3 (PWR_CR3).</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTVOS</name>
<description>VOS currently applied for VCORE voltage
scaling selection. These bits reflect the last VOS
value applied to the PMU.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>AVDO</name>
<description>Analog voltage detector output on VDDA
This bit is set and cleared by hardware. It is valid
only if AVD on VDDA is enabled by the AVDEN bit.
Note: Since the AVD is disabled in Standby mode, this
bit is equal to 0 after Standby or reset until the
AVDEN bit is set.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>This register is not reset by wakeup from
Standby mode, RESET signal and VDD POR. It is only reset
by VSW POR and VSWRST reset. This register shall not be
accessed when VSWRST bit in RCC_BDCR register resets the
VSW domain.After reset, PWR_CR2 register is
write-protected. Prior to modifying its content, the DBP
bit in PWR_CR1 register must be set to disable the write
protection.</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BREN</name>
<description>Backup regulator enable When set, the
Backup regulator (used to maintain the backup RAM
content in Standby and VBAT modes) is enabled. If
BREN is reset, the backup regulator is switched off.
The backup RAM can still be used in Run and Stop
modes. However, its content will be lost in Standby
and VBAT modes. If BREN is set, the application must
wait till the Backup Regulator Ready flag (BRRDY) is
set to indicate that the data written into the SRAM
will be maintained in Standby and VBAT
modes.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MONEN</name>
<description>VBAT and temperature monitoring enable
When set, the VBAT supply and temperature monitoring
is enabled.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRRDY</name>
<description>Backup regulator ready This bit is set
by hardware to indicate that the Backup regulator is
ready.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VBATL</name>
<description>VBAT level monitoring versus low
threshold</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VBATH</name>
<description>VBAT level monitoring versus high
threshold</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TEMPL</name>
<description>Temperature level monitoring versus low
threshold</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TEMPH</name>
<description>Temperature level monitoring versus high
threshold</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CR3</name>
<displayName>CR3</displayName>
<description>Reset only by POR only, not reset by wakeup
from Standby mode and RESET pad. The lower byte of this
register is written once after POR and shall be written
before changing VOS level or ck_sys clock frequency. No
limitation applies to the upper bytes.Programming data
corresponding to an invalid combination of SDLEVEL,
SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be
ignored: data will not be written, the written-once
mechanism will lock the register and any further write
access will be ignored. The default supply configuration
will be kept and the ACTVOSRDY bit in PWR control status
register 1 (PWR_CSR1) will go on indicating invalid
voltage levels. The system shall be power cycled before
writing a new value.</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<resetValue>0x00000006</resetValue>
<fields>
<field>
<name>BYPASS</name>
<description>Power management unit
bypass</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDOEN</name>
<description>Low drop-out regulator
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCUEN</name>
<description>SD converter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VBE</name>
<description>VBAT charging enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VBRS</name>
<description>VBAT charging resistor
selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USB33DEN</name>
<description>VDD33USB voltage level detector
enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBREGEN</name>
<description>USB regulator enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USB33RDY</name>
<description>USB supply ready.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CPUCR</name>
<displayName>CPUCR</displayName>
<description>This register allows controlling CPU1
power.</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PDDS_D1</name>
<description>D1 domain Power Down Deepsleep
selection. This bit allows CPU1 to define the
Deepsleep mode for D1 domain.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PDDS_D2</name>
<description>D2 domain Power Down Deepsleep. This bit
allows CPU1 to define the Deepsleep mode for D2
domain.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PDDS_D3</name>
<description>System D3 domain Power Down Deepsleep.
This bit allows CPU1 to define the Deepsleep mode for
System D3 domain.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STOPF</name>
<description>STOP flag This bit is set by hardware
and cleared only by any reset or by setting the CPU1
CSSF bit.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SBF</name>
<description>System Standby flag This bit is set by
hardware and cleared only by a POR (Power-on Reset)
or by setting the CPU1 CSSF bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SBF_D1</name>
<description>D1 domain DStandby flag This bit is set
by hardware and cleared by any system reset or by
setting the CPU1 CSSF bit. Once set, this bit can be
cleared only when the D1 domain is no longer in
DStandby mode.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SBF_D2</name>
<description>D2 domain DStandby flag This bit is set
by hardware and cleared by any system reset or by
setting the CPU1 CSSF bit. Once set, this bit can be
cleared only when the D2 domain is no longer in
DStandby mode.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSSF</name>
<description>Clear D1 domain CPU1 Standby, Stop and
HOLD flags (always read as 0) This bit is cleared to
0 by hardware.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RUN_D3</name>
<description>Keep system D3 domain in Run mode
regardless of the CPU sub-systems modes</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>D3CR</name>
<displayName>D3CR</displayName>
<description>This register allows controlling D3 domain
power.Following reset VOSRDY will be read 1 by
software</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<resetValue>0x00004000</resetValue>
<fields>
<field>
<name>VOSRDY</name>
<description>VOS Ready bit for VCORE voltage scaling
output selection. This bit is set to 1 by hardware
when Bypass mode is selected in PWR control register
3 (PWR_CR3).</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VOS</name>
<description>Voltage scaling selection according to
performance These bits control the VCORE voltage
level and allow to obtains the best trade-off between
power consumption and performance: When increasing
the performance, the voltage scaling shall be changed
before increasing the system frequency. When
decreasing performance, the system frequency shall
first be decreased before changing the voltage
scaling.</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WKUPCR</name>
<displayName>WKUPCR</displayName>
<description>reset only by system reset, not reset by
wakeup from Standby mode5 wait states are required when
writing this register (when clearing a WKUPF bit in
PWR_WKUPFR, the AHB write access will complete after the
WKUPF has been cleared).</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WKUPC</name>
<description>Clear Wakeup pin flag for WKUP. These
bits are always read as 0.</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>WKUPFR</name>
<displayName>WKUPFR</displayName>
<description>reset only by system reset, not reset by
wakeup from Standby mode</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WKUPF1</name>
<description>Wakeup pin WKUPF flag. This bit is set
by hardware and cleared only by a Reset pin or by
setting the WKUPCn+1 bit in the PWR wakeup clear
register (PWR_WKUPCR).</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPF2</name>
<description>Wakeup pin WKUPF flag. This bit is set
by hardware and cleared only by a Reset pin or by
setting the WKUPCn+1 bit in the PWR wakeup clear
register (PWR_WKUPCR).</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPF3</name>
<description>Wakeup pin WKUPF flag. This bit is set
by hardware and cleared only by a Reset pin or by
setting the WKUPCn+1 bit in the PWR wakeup clear
register (PWR_WKUPCR).</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPF4</name>
<description>Wakeup pin WKUPF flag. This bit is set
by hardware and cleared only by a Reset pin or by
setting the WKUPCn+1 bit in the PWR wakeup clear
register (PWR_WKUPCR).</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPF5</name>
<description>Wakeup pin WKUPF flag. This bit is set
by hardware and cleared only by a Reset pin or by
setting the WKUPCn+1 bit in the PWR wakeup clear
register (PWR_WKUPCR).</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPF6</name>
<description>Wakeup pin WKUPF flag. This bit is set
by hardware and cleared only by a Reset pin or by
setting the WKUPCn+1 bit in the PWR wakeup clear
register (PWR_WKUPCR).</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WKUPEPR</name>
<displayName>WKUPEPR</displayName>
<description>Reset only by system reset, not reset by
wakeup from Standby mode</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WKUPEN1</name>
<description>Enable Wakeup Pin WKUPn+1 Each bit is
set and cleared by software. Note: An additional
wakeup event is detected if WKUPn+1 pin is enabled
(by setting the WKUPENn+1 bit) when WKUPn+1 pin level
is already high when WKUPPn+1 selects rising edge, or
low when WKUPPn+1 selects falling edge.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPEN2</name>
<description>Enable Wakeup Pin WKUPn+1 Each bit is
set and cleared by software. Note: An additional
wakeup event is detected if WKUPn+1 pin is enabled
(by setting the WKUPENn+1 bit) when WKUPn+1 pin level
is already high when WKUPPn+1 selects rising edge, or
low when WKUPPn+1 selects falling edge.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPEN3</name>
<description>Enable Wakeup Pin WKUPn+1 Each bit is
set and cleared by software. Note: An additional
wakeup event is detected if WKUPn+1 pin is enabled
(by setting the WKUPENn+1 bit) when WKUPn+1 pin level
is already high when WKUPPn+1 selects rising edge, or
low when WKUPPn+1 selects falling edge.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPEN4</name>
<description>Enable Wakeup Pin WKUPn+1 Each bit is
set and cleared by software. Note: An additional
wakeup event is detected if WKUPn+1 pin is enabled
(by setting the WKUPENn+1 bit) when WKUPn+1 pin level
is already high when WKUPPn+1 selects rising edge, or
low when WKUPPn+1 selects falling edge.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPEN5</name>
<description>Enable Wakeup Pin WKUPn+1 Each bit is
set and cleared by software. Note: An additional
wakeup event is detected if WKUPn+1 pin is enabled
(by setting the WKUPENn+1 bit) when WKUPn+1 pin level
is already high when WKUPPn+1 selects rising edge, or
low when WKUPPn+1 selects falling edge.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPEN6</name>
<description>Enable Wakeup Pin WKUPn+1 Each bit is
set and cleared by software. Note: An additional
wakeup event is detected if WKUPn+1 pin is enabled
(by setting the WKUPENn+1 bit) when WKUPn+1 pin level
is already high when WKUPPn+1 selects rising edge, or
low when WKUPPn+1 selects falling edge.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPP1</name>
<description>Wakeup pin polarity bit for WKUPn-7
These bits define the polarity used for event
detection on WKUPn-7 external wakeup
pin.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPP2</name>
<description>Wakeup pin polarity bit for WKUPn-7
These bits define the polarity used for event
detection on WKUPn-7 external wakeup
pin.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPP3</name>
<description>Wakeup pin polarity bit for WKUPn-7
These bits define the polarity used for event
detection on WKUPn-7 external wakeup
pin.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPP4</name>
<description>Wakeup pin polarity bit for WKUPn-7
These bits define the polarity used for event
detection on WKUPn-7 external wakeup
pin.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPP5</name>
<description>Wakeup pin polarity bit for WKUPn-7
These bits define the polarity used for event
detection on WKUPn-7 external wakeup
pin.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPP6</name>
<description>Wakeup pin polarity bit for WKUPn-7
These bits define the polarity used for event
detection on WKUPn-7 external wakeup
pin.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WKUPPUPD1</name>
<description>Wakeup pin pull
configuration</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WKUPPUPD2</name>
<description>Wakeup pin pull
configuration</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WKUPPUPD3</name>
<description>Wakeup pin pull
configuration</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WKUPPUPD4</name>
<description>Wakeup pin pull
configuration</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WKUPPUPD5</name>
<description>Wakeup pin pull
configuration</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WKUPPUPD6</name>
<description>Wakeup pin pull configuration for
WKUP(truncate(n/2)-7) These bits define the I/O pad
pull configuration used when WKUPEN(truncate(n/2)-7)
= 1. The associated GPIO port pull configuration
shall be set to the same value or to 00. The Wakeup
pin pull configuration is kept in Standby
mode.</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SPI1</name>
<description>Serial peripheral interface</description>
<groupName>SPI</groupName>
<baseAddress>0x40013000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SPI1</name>
<description>SPI1 global interrupt</description>
<value>35</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IOLOCK</name>
<description>Locking the AF configuration of
associated IOs</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TCRCI</name>
<description>CRC calculation initialization pattern
control for transmitter</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCRCI</name>
<description>CRC calculation initialization pattern
control for receiver</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CRC33_17</name>
<description>32-bit CRC polynomial
configuration</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSI</name>
<description>Internal SS signal input
level</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HDDIR</name>
<description>Rx/Tx direction at Half-duplex
mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSUSP</name>
<description>Master SUSPend request</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTART</name>
<description>Master transfer start</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MASRX</name>
<description>Master automatic SUSP in Receive
mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SPE</name>
<description>Serial Peripheral Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSER</name>
<description>Number of data transfer extension to be
reload into TSIZE just when a previous</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TSIZE</name>
<description>Number of data at current
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG1</name>
<displayName>CFG1</displayName>
<description>configuration register 1</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00070007</resetValue>
<fields>
<field>
<name>MBR</name>
<description>Master baud rate</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CRCEN</name>
<description>Hardware CRC computation
enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCSIZE</name>
<description>Length of CRC frame to be transacted and
compared</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TXDMAEN</name>
<description>Tx DMA stream enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXDMAEN</name>
<description>Rx DMA stream enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDRDET</name>
<description>Detection of underrun condition at slave
transmitter</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>UDRCFG</name>
<description>Behavior of slave transmitter at
underrun condition</description>
<bitOffset>9</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FTHVL</name>
<description>threshold level</description>
<bitOffset>5</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Number of bits in at single SPI data
frame</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFG2</name>
<displayName>CFG2</displayName>
<description>configuration register 2</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AFCNTR</name>
<description>Alternate function GPIOs
control</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSOM</name>
<description>SS output management in master
mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSOE</name>
<description>SS output enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSIOP</name>
<description>SS input/output polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSM</name>
<description>Software management of SS signal
input</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPOL</name>
<description>Clock polarity</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPHA</name>
<description>Clock phase</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSBFRST</name>
<description>Data frame format</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MASTER</name>
<description>SPI Master</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SP</name>
<description>Serial Protocol</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>COMM</name>
<description>SPI Communication Mode</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IOSWP</name>
<description>Swap functionality of MISO and MOSI
pins</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MIDI</name>
<description>Master Inter-Data Idleness</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MSSI</name>
<description>Master SS Idleness</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>Interrupt Enable Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSERFIE</name>
<description>Additional number of transactions reload
interrupt enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODFIE</name>
<description>Mode Fault interrupt
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TIFREIE</name>
<description>TIFRE interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CRCEIE</name>
<description>CRC Interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVRIE</name>
<description>OVR interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UDRIE</name>
<description>UDR interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXTFIE</name>
<description>TXTFIE interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EOTIE</name>
<description>EOT, SUSP and TXC interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DPXPIE</name>
<description>DXP interrupt enabled</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXPIE</name>
<description>TXP interrupt enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXPIE</name>
<description>RXP Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>Status Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00001002</resetValue>
<fields>
<field>
<name>CTSIZE</name>
<description>Number of data frames remaining in
current TSIZE session</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>RXWNE</name>
<description>RxFIFO Word Not Empty</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXPLVL</name>
<description>RxFIFO Packing LeVeL</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TXC</name>
<description>TxFIFO transmission
complete</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>SUSPend</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSERF</name>
<description>Additional number of SPI data to be
transacted was reload</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODF</name>
<description>Mode Fault</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIFRE</name>
<description>TI frame format error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCE</name>
<description>CRC Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR</name>
<description>Overrun</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDR</name>
<description>Underrun at slave transmission
mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXTF</name>
<description>Transmission Transfer
Filled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOT</name>
<description>End Of Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DXP</name>
<description>Duplex Packet</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXP</name>
<description>Tx-Packet space available</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXP</name>
<description>Rx-Packet available</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IFCR</name>
<displayName>IFCR</displayName>
<description>Interrupt/Status Flags Clear
Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SUSPC</name>
<description>SUSPend flag clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSERFC</name>
<description>TSERFC flag clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODFC</name>
<description>Mode Fault flag clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIFREC</name>
<description>TI frame format error flag
clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCEC</name>
<description>CRC Error flag clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRC</name>
<description>Overrun flag clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDRC</name>
<description>Underrun flag clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXTFC</name>
<description>Transmission Transfer Filled flag
clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOTC</name>
<description>End Of Transfer flag clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXDR</name>
<displayName>TXDR</displayName>
<description>Transmit Data Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXDR</name>
<description>Transmit data register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXDR</name>
<displayName>RXDR</displayName>
<description>Receive Data Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDR</name>
<description>Receive data register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCPOLY</name>
<displayName>CRCPOLY</displayName>
<description>Polynomial Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000107</resetValue>
<fields>
<field>
<name>CRCPOLY</name>
<description>CRC polynomial register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXCRC</name>
<displayName>TXCRC</displayName>
<description>Transmitter CRC Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCRC</name>
<description>CRC register for
transmitter</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXCRC</name>
<displayName>RXCRC</displayName>
<description>Receiver CRC Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCRC</name>
<description>CRC register for receiver</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>UDRDR</name>
<displayName>UDRDR</displayName>
<description>Underrun Data Register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UDRDR</name>
<description>Data at slave underrun
condition</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CGFR</name>
<displayName>CGFR</displayName>
<description>configuration register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCKOE</name>
<description>Master clock output enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ODD</name>
<description>Odd factor for the
prescaler</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2SDIV</name>
<description>I2S linear prescaler</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DATFMT</name>
<description>Data format</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WSINV</name>
<description>Fixed channel length in
SLAVE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FIXCH</name>
<description>Word select inversion</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKPOL</name>
<description>Serial audio clock
polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHLEN</name>
<description>Channel length (number of bits per audio
channel)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATLEN</name>
<description>Data length to be
transferred</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCMSYNC</name>
<description>PCM frame synchronization</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2SSTD</name>
<description>I2S standard selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>I2SCFG</name>
<description>I2S configuration mode</description>
<bitOffset>1</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>I2SMOD</name>
<description>I2S mode selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="SPI1">
<name>SPI2</name>
<baseAddress>0x40003800</baseAddress>
<interrupt>
<name>SPI2</name>
<description>SPI2 global interrupt</description>
<value>36</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SPI1">
<name>SPI3</name>
<baseAddress>0x40003C00</baseAddress>
<interrupt>
<name>SPI3</name>
<description>SPI3 global interrupt</description>
<value>51</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SPI1">
<name>SPI4</name>
<baseAddress>0x40013400</baseAddress>
<interrupt>
<name>SPI4</name>
<description>SPI4 global interrupt</description>
<value>84</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SPI1">
<name>SPI5</name>
<baseAddress>0x40015000</baseAddress>
<interrupt>
<name>SPI5</name>
<description>SPI5 global interrupt</description>
<value>85</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SPI1">
<name>SPI6</name>
<baseAddress>0x58001400</baseAddress>
<interrupt>
<name>SPI6</name>
<description>SPI6 global interrupt</description>
<value>86</value>
</interrupt>
</peripheral>
<peripheral>
<name>LTDC</name>
<description>LCD-TFT Controller</description>
<groupName>LTDC</groupName>
<baseAddress>0x50001000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x1000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>LTDC</name>
<description>LCD-TFT global interrupt</description>
<value>88</value>
</interrupt>
<interrupt>
<name>LTDC_ER</name>
<description>LCD-TFT error interrupt</description>
<value>89</value>
</interrupt>
<registers>
<register>
<name>SSCR</name>
<displayName>SSCR</displayName>
<description>Synchronization Size Configuration
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HSW</name>
<description>Horizontal Synchronization Width (in
units of pixel clock period)</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>VSH</name>
<description>Vertical Synchronization Height (in
units of horizontal scan line)</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>BPCR</name>
<displayName>BPCR</displayName>
<description>Back Porch Configuration
Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AHBP</name>
<description>Accumulated Horizontal back porch (in
units of pixel clock period)</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>AVBP</name>
<description>Accumulated Vertical back porch (in
units of horizontal scan line)</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>AWCR</name>
<displayName>AWCR</displayName>
<description>Active Width Configuration
Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AAV</name>
<description>AAV</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>AAH</name>
<description>Accumulated Active Height (in units of
horizontal scan line)</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>TWCR</name>
<displayName>TWCR</displayName>
<description>Total Width Configuration
Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TOTALW</name>
<description>Total Width (in units of pixel clock
period)</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>TOTALH</name>
<description>Total Height (in units of horizontal
scan line)</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>GCR</name>
<displayName>GCR</displayName>
<description>Global Control Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<resetValue>0x00002220</resetValue>
<fields>
<field>
<name>HSPOL</name>
<description>Horizontal Synchronization
Polarity</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VSPOL</name>
<description>Vertical Synchronization
Polarity</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DEPOL</name>
<description>Data Enable Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCPOL</name>
<description>Pixel Clock Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DEN</name>
<description>Dither Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRW</name>
<description>Dither Red Width</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DGW</name>
<description>Dither Green Width</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DBW</name>
<description>Dither Blue Width</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LTDCEN</name>
<description>LCD-TFT controller enable
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SRCR</name>
<displayName>SRCR</displayName>
<description>Shadow Reload Configuration
Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VBR</name>
<description>Vertical Blanking Reload</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IMR</name>
<description>Immediate Reload</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BCCR</name>
<displayName>BCCR</displayName>
<description>Background Color Configuration
Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BCBLUE</name>
<description>Background Color Blue
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BCGREEN</name>
<description>Background Color Green
value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BCRED</name>
<description>Background Color Red value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>Interrupt Enable Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RRIE</name>
<description>Register Reload interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TERRIE</name>
<description>Transfer Error Interrupt
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FUIE</name>
<description>FIFO Underrun Interrupt
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LIE</name>
<description>Line Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Interrupt Status Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RRIF</name>
<description>Register Reload Interrupt
Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TERRIF</name>
<description>Transfer Error interrupt
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FUIF</name>
<description>FIFO Underrun Interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LIF</name>
<description>Line Interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Interrupt Clear Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRRIF</name>
<description>Clears Register Reload Interrupt
Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTERRIF</name>
<description>Clears the Transfer Error Interrupt
Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFUIF</name>
<description>Clears the FIFO Underrun Interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLIF</name>
<description>Clears the Line Interrupt
Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LIPCR</name>
<displayName>LIPCR</displayName>
<description>Line Interrupt Position Configuration
Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LIPOS</name>
<description>Line Interrupt Position</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPSR</name>
<displayName>CPSR</displayName>
<description>Current Position Status
Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CXPOS</name>
<description>Current X Position</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CYPOS</name>
<description>Current Y Position</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CDSR</name>
<displayName>CDSR</displayName>
<description>Current Display Status
Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000000F</resetValue>
<fields>
<field>
<name>HSYNCS</name>
<description>Horizontal Synchronization display
Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSYNCS</name>
<description>Vertical Synchronization display
Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HDES</name>
<description>Horizontal Data Enable display
Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VDES</name>
<description>Vertical Data Enable display
Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CR</name>
<displayName>L1CR</displayName>
<description>Layerx Control Register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLUTEN</name>
<description>Color Look-Up Table Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLKEN</name>
<description>Color Keying Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LEN</name>
<description>Layer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1WHPCR</name>
<displayName>L1WHPCR</displayName>
<description>Layerx Window Horizontal Position
Configuration Register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WHSPPOS</name>
<description>Window Horizontal Stop
Position</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>WHSTPOS</name>
<description>Window Horizontal Start
Position</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1WVPCR</name>
<displayName>L1WVPCR</displayName>
<description>Layerx Window Vertical Position
Configuration Register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WVSPPOS</name>
<description>Window Vertical Stop
Position</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>WVSTPOS</name>
<description>Window Vertical Start
Position</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CKCR</name>
<displayName>L1CKCR</displayName>
<description>Layerx Color Keying Configuration
Register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKRED</name>
<description>Color Key Red value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKGREEN</name>
<description>Color Key Green value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKBLUE</name>
<description>Color Key Blue value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1PFCR</name>
<displayName>L1PFCR</displayName>
<description>Layerx Pixel Format Configuration
Register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PF</name>
<description>Pixel Format</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CACR</name>
<displayName>L1CACR</displayName>
<description>Layerx Constant Alpha Configuration
Register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CONSTA</name>
<description>Constant Alpha</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1DCCR</name>
<displayName>L1DCCR</displayName>
<description>Layerx Default Color Configuration
Register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DCALPHA</name>
<description>Default Color Alpha</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DCRED</name>
<description>Default Color Red</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DCGREEN</name>
<description>Default Color Green</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DCBLUE</name>
<description>Default Color Blue</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1BFCR</name>
<displayName>L1BFCR</displayName>
<description>Layerx Blending Factors Configuration
Register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000607</resetValue>
<fields>
<field>
<name>BF1</name>
<description>Blending Factor 1</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BF2</name>
<description>Blending Factor 2</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CFBAR</name>
<displayName>L1CFBAR</displayName>
<description>Layerx Color Frame Buffer Address
Register</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CFBADD</name>
<description>Color Frame Buffer Start
Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CFBLR</name>
<displayName>L1CFBLR</displayName>
<description>Layerx Color Frame Buffer Length
Register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CFBP</name>
<description>Color Frame Buffer Pitch in
bytes</description>
<bitOffset>16</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>CFBLL</name>
<description>Color Frame Buffer Line
Length</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CFBLNR</name>
<displayName>L1CFBLNR</displayName>
<description>Layerx ColorFrame Buffer Line Number
Register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CFBLNBR</name>
<description>Frame Buffer Line Number</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>L1CLUTWR</name>
<displayName>L1CLUTWR</displayName>
<description>Layerx CLUT Write Register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLUTADD</name>
<description>CLUT Address</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RED</name>
<description>Red value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>GREEN</name>
<description>Green value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BLUE</name>
<description>Blue value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CR</name>
<displayName>L2CR</displayName>
<description>Layerx Control Register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLUTEN</name>
<description>Color Look-Up Table Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLKEN</name>
<description>Color Keying Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LEN</name>
<description>Layer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2WHPCR</name>
<displayName>L2WHPCR</displayName>
<description>Layerx Window Horizontal Position
Configuration Register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WHSPPOS</name>
<description>Window Horizontal Stop
Position</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>WHSTPOS</name>
<description>Window Horizontal Start
Position</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2WVPCR</name>
<displayName>L2WVPCR</displayName>
<description>Layerx Window Vertical Position
Configuration Register</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WVSPPOS</name>
<description>Window Vertical Stop
Position</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>WVSTPOS</name>
<description>Window Vertical Start
Position</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CKCR</name>
<displayName>L2CKCR</displayName>
<description>Layerx Color Keying Configuration
Register</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKRED</name>
<description>Color Key Red value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKGREEN</name>
<description>Color Key Green value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKBLUE</name>
<description>Color Key Blue value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2PFCR</name>
<displayName>L2PFCR</displayName>
<description>Layerx Pixel Format Configuration
Register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PF</name>
<description>Pixel Format</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CACR</name>
<displayName>L2CACR</displayName>
<description>Layerx Constant Alpha Configuration
Register</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CONSTA</name>
<description>Constant Alpha</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2DCCR</name>
<displayName>L2DCCR</displayName>
<description>Layerx Default Color Configuration
Register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DCALPHA</name>
<description>Default Color Alpha</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DCRED</name>
<description>Default Color Red</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DCGREEN</name>
<description>Default Color Green</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DCBLUE</name>
<description>Default Color Blue</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2BFCR</name>
<displayName>L2BFCR</displayName>
<description>Layerx Blending Factors Configuration
Register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000607</resetValue>
<fields>
<field>
<name>BF1</name>
<description>Blending Factor 1</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BF2</name>
<description>Blending Factor 2</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CFBAR</name>
<displayName>L2CFBAR</displayName>
<description>Layerx Color Frame Buffer Address
Register</description>
<addressOffset>0x12C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CFBADD</name>
<description>Color Frame Buffer Start
Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CFBLR</name>
<displayName>L2CFBLR</displayName>
<description>Layerx Color Frame Buffer Length
Register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CFBP</name>
<description>Color Frame Buffer Pitch in
bytes</description>
<bitOffset>16</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>CFBLL</name>
<description>Color Frame Buffer Line
Length</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CFBLNR</name>
<displayName>L2CFBLNR</displayName>
<description>Layerx ColorFrame Buffer Line Number
Register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CFBLNBR</name>
<description>Frame Buffer Line Number</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>L2CLUTWR</name>
<displayName>L2CLUTWR</displayName>
<description>Layerx CLUT Write Register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLUTADD</name>
<description>CLUT Address</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RED</name>
<description>Red value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>GREEN</name>
<description>Green value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BLUE</name>
<description>Blue value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SPDIFRX</name>
<description>Receiver Interface</description>
<groupName>SPDIFRX</groupName>
<baseAddress>0x40004000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SPDIF</name>
<description>SPDIFRX global interrupt</description>
<value>97</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>Control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SPDIFRXEN</name>
<description>Peripheral Block Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RXDMAEN</name>
<description>Receiver DMA ENable for data
flow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTEO</name>
<description>STerEO Mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRFMT</name>
<description>RX Data format</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PMSK</name>
<description>Mask Parity error bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VMSK</name>
<description>Mask of Validity bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CUMSK</name>
<description>Mask of channel status and user
bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTMSK</name>
<description>Mask of Preamble Type bits</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CBDMAEN</name>
<description>Control Buffer DMA ENable for control
flow</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHSEL</name>
<description>Channel Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NBTR</name>
<description>Maximum allowed re-tries during
synchronization phase</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>WFA</name>
<description>Wait For Activity</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INSEL</name>
<description>input selection</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CKSEN</name>
<description>Symbol Clock Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSBKPEN</name>
<description>Backup Symbol Clock Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<displayName>IMR</displayName>
<description>Interrupt mask register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNEIE</name>
<description>RXNE interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSRNEIE</name>
<description>Control Buffer Ready Interrupt
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERRIE</name>
<description>Parity error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRIE</name>
<description>Overrun error Interrupt
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBLKIE</name>
<description>Synchronization Block Detected Interrupt
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCDIE</name>
<description>Synchronization Done</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IFEIE</name>
<description>Serial Interface Error Interrupt
Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>Status register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNE</name>
<description>Read data register not
empty</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSRNE</name>
<description>Control Buffer register is not
empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Parity error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR</name>
<description>Overrun error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBD</name>
<description>Synchronization Block
Detected</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCD</name>
<description>Synchronization Done</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Framing error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERR</name>
<description>Synchronization error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TERR</name>
<description>Time-out error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIDTH5</name>
<description>Duration of 5 symbols counted with
SPDIF_CLK</description>
<bitOffset>16</bitOffset>
<bitWidth>15</bitWidth>
</field>
</fields>
</register>
<register>
<name>IFCR</name>
<displayName>IFCR</displayName>
<description>Interrupt Flag Clear register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PERRCF</name>
<description>Clears the Parity error
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRCF</name>
<description>Clears the Overrun error
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBDCF</name>
<description>Clears the Synchronization Block
Detected flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCDCF</name>
<description>Clears the Synchronization Done
flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DR_00</name>
<displayName>DR_00</displayName>
<description>Data input register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DR</name>
<description>Parity Error bit</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
<field>
<name>PE</name>
<description>Parity Error bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>V</name>
<description>Validity bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>U</name>
<description>User bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C</name>
<description>Channel Status bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PT</name>
<description>Preamble Type</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<displayName>CSR</displayName>
<description>Channel Status register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>USR</name>
<description>User data information</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CS</name>
<description>Channel A status
information</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SOB</name>
<description>Start Of Block</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIR</name>
<displayName>DIR</displayName>
<description>Debug Information register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>THI</name>
<description>Threshold HIGH</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>TLO</name>
<description>Threshold LOW</description>
<bitOffset>16</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>VERR</name>
<displayName>VERR</displayName>
<description>SPDIFRX version register</description>
<addressOffset>0x3F4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000012</resetValue>
<fields>
<field>
<name>MINREV</name>
<description>Minor revision</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MAJREV</name>
<description>Major revision</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<displayName>IDR</displayName>
<description>SPDIFRX identification
register</description>
<addressOffset>0x3F8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00130041</resetValue>
<fields>
<field>
<name>ID</name>
<description>SPDIFRX identifier</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>SIDR</name>
<displayName>SIDR</displayName>
<description>SPDIFRX size identification
register</description>
<addressOffset>0x3FC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0xA3C5DD01</resetValue>
<fields>
<field>
<name>SID</name>
<description>Size identification</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DR_01</name>
<displayName>DR_01</displayName>
<description>Data input register</description>
<alternateRegister>DR_00</alternateRegister>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PE</name>
<description>Parity Error bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>V</name>
<description>Validity bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>U</name>
<description>User bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C</name>
<description>Channel Status bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PT</name>
<description>Preamble Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DR</name>
<description>Data value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DR_10</name>
<displayName>DR_10</displayName>
<description>Data input register</description>
<alternateRegister>DR_00</alternateRegister>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DRNL1</name>
<description>Data value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DRNL2</name>
<description>Data value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ADC3</name>
<description>Analog to Digital Converter</description>
<groupName>ADC</groupName>
<baseAddress>0x58026000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0xD1</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ADC3</name>
<description>ADC3 global interrupt</description>
<value>127</value>
</interrupt>
<registers>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>ADC interrupt and status
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JQOVF</name>
<description>ADC group injected contexts queue
overflow flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD3</name>
<description>ADC analog watchdog 3 flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD2</name>
<description>ADC analog watchdog 2 flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD1</name>
<description>ADC analog watchdog 1 flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOS</name>
<description>ADC group injected end of sequence
conversions flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOC</name>
<description>ADC group injected end of unitary
conversion flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR</name>
<description>ADC group regular overrun
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOS</name>
<description>ADC group regular end of sequence
conversions flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOC</name>
<description>ADC group regular end of unitary
conversion flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOSMP</name>
<description>ADC group regular end of sampling
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADRDY</name>
<description>ADC ready flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>ADC interrupt enable register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JQOVFIE</name>
<description>ADC group injected contexts queue
overflow interrupt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD3IE</name>
<description>ADC analog watchdog 3
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD2IE</name>
<description>ADC analog watchdog 2
interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD1IE</name>
<description>ADC analog watchdog 1
interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOSIE</name>
<description>ADC group injected end of sequence
conversions interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOCIE</name>
<description>ADC group injected end of unitary
conversion interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRIE</name>
<description>ADC group regular overrun
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOSIE</name>
<description>ADC group regular end of sequence
conversions interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOCIE</name>
<description>ADC group regular end of unitary
conversion interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOSMPIE</name>
<description>ADC group regular end of sampling
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADRDYIE</name>
<description>ADC ready interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>ADC control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADCAL</name>
<description>ADC calibration</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADCALDIF</name>
<description>ADC differential mode for
calibration</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEEPPWD</name>
<description>ADC deep power down enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADVREGEN</name>
<description>ADC voltage regulator
enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCALRDYW6</name>
<description>Linearity calibration ready Word
6</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCALRDYW5</name>
<description>Linearity calibration ready Word
5</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCALRDYW4</name>
<description>Linearity calibration ready Word
4</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCALRDYW3</name>
<description>Linearity calibration ready Word
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCALRDYW2</name>
<description>Linearity calibration ready Word
2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCALRDYW1</name>
<description>Linearity calibration ready Word
1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADCALLIN</name>
<description>Linearity calibration</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOST</name>
<description>Boost mode control</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JADSTP</name>
<description>ADC group injected conversion
stop</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADSTP</name>
<description>ADC group regular conversion
stop</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JADSTART</name>
<description>ADC group injected conversion
start</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADSTART</name>
<description>ADC group regular conversion
start</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDIS</name>
<description>ADC disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADEN</name>
<description>ADC enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>ADC configuration register 1</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JQDIS</name>
<description>ADC group injected contexts queue
disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDCH1CH</name>
<description>ADC analog watchdog 1 monitored channel
selection</description>
<bitOffset>26</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JAUTO</name>
<description>ADC group injected automatic trigger
mode</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JAWD1EN</name>
<description>ADC analog watchdog 1 enable on scope
ADC group injected</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD1EN</name>
<description>ADC analog watchdog 1 enable on scope
ADC group regular</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD1SGL</name>
<description>ADC analog watchdog 1 monitoring a
single channel or all channels</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JQM</name>
<description>ADC group injected contexts queue
mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JDISCEN</name>
<description>ADC group injected sequencer
discontinuous mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DISCNUM</name>
<description>ADC group regular sequencer
discontinuous number of ranks</description>
<bitOffset>17</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DISCEN</name>
<description>ADC group regular sequencer
discontinuous mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AUTDLY</name>
<description>ADC low power auto wait</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>ADC group regular continuous conversion
mode</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRMOD</name>
<description>ADC group regular overrun
configuration</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEN</name>
<description>ADC group regular external trigger
polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EXTSEL</name>
<description>ADC group regular external trigger
source</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>RES</name>
<description>ADC data resolution</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DMNGT</name>
<description>ADC DMA transfer enable</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR2</name>
<displayName>CFGR2</displayName>
<description>ADC configuration register 2</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ROVSE</name>
<description>ADC oversampler enable on scope ADC
group regular</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVSE</name>
<description>ADC oversampler enable on scope ADC
group injected</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVSS</name>
<description>ADC oversampling shift</description>
<bitOffset>5</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TROVS</name>
<description>ADC oversampling discontinuous mode
(triggered mode) for ADC group regular</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVSM</name>
<description>Regular Oversampling mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSHIFT1</name>
<description>Right-shift data after Offset 1
correction</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSHIFT2</name>
<description>Right-shift data after Offset 2
correction</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSHIFT3</name>
<description>Right-shift data after Offset 3
correction</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSHIFT4</name>
<description>Right-shift data after Offset 4
correction</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSR</name>
<description>Oversampling ratio</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>LSHIFT</name>
<description>Left shift factor</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>SMPR1</name>
<displayName>SMPR1</displayName>
<description>ADC sampling time register 1</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMP9</name>
<description>ADC channel 9 sampling time
selection</description>
<bitOffset>27</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP8</name>
<description>ADC channel 8 sampling time
selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP7</name>
<description>ADC channel 7 sampling time
selection</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP6</name>
<description>ADC channel 6 sampling time
selection</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP5</name>
<description>ADC channel 5 sampling time
selection</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP4</name>
<description>ADC channel 4 sampling time
selection</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP3</name>
<description>ADC channel 3 sampling time
selection</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP2</name>
<description>ADC channel 2 sampling time
selection</description>
<bitOffset>6</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP1</name>
<description>ADC channel 1 sampling time
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SMPR2</name>
<displayName>SMPR2</displayName>
<description>ADC sampling time register 2</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMP19</name>
<description>ADC channel 18 sampling time
selection</description>
<bitOffset>27</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP18</name>
<description>ADC channel 18 sampling time
selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP17</name>
<description>ADC channel 17 sampling time
selection</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP16</name>
<description>ADC channel 16 sampling time
selection</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP15</name>
<description>ADC channel 15 sampling time
selection</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP14</name>
<description>ADC channel 14 sampling time
selection</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP13</name>
<description>ADC channel 13 sampling time
selection</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP12</name>
<description>ADC channel 12 sampling time
selection</description>
<bitOffset>6</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP11</name>
<description>ADC channel 11 sampling time
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMP10</name>
<description>ADC channel 10 sampling time
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>LTR1</name>
<displayName>LTR1</displayName>
<description>ADC analog watchdog 1 threshold
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFF0000</resetValue>
<fields>
<field>
<name>LTR1</name>
<description>ADC analog watchdog 1 threshold
low</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>LHTR1</name>
<displayName>LHTR1</displayName>
<description>ADC analog watchdog 2 threshold
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0FFF0000</resetValue>
<fields>
<field>
<name>LHTR1</name>
<description>ADC analog watchdog 2 threshold
low</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>SQR1</name>
<displayName>SQR1</displayName>
<description>ADC group regular sequencer ranks register
1</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SQ4</name>
<description>ADC group regular sequencer rank
4</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ3</name>
<description>ADC group regular sequencer rank
3</description>
<bitOffset>18</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ2</name>
<description>ADC group regular sequencer rank
2</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ1</name>
<description>ADC group regular sequencer rank
1</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>L3</name>
<description>L3</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>SQR2</name>
<displayName>SQR2</displayName>
<description>ADC group regular sequencer ranks register
2</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SQ9</name>
<description>ADC group regular sequencer rank
9</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ8</name>
<description>ADC group regular sequencer rank
8</description>
<bitOffset>18</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ7</name>
<description>ADC group regular sequencer rank
7</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ6</name>
<description>ADC group regular sequencer rank
6</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ5</name>
<description>ADC group regular sequencer rank
5</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>SQR3</name>
<displayName>SQR3</displayName>
<description>ADC group regular sequencer ranks register
3</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SQ14</name>
<description>ADC group regular sequencer rank
14</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ13</name>
<description>ADC group regular sequencer rank
13</description>
<bitOffset>18</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ12</name>
<description>ADC group regular sequencer rank
12</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ11</name>
<description>ADC group regular sequencer rank
11</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ10</name>
<description>ADC group regular sequencer rank
10</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>SQR4</name>
<displayName>SQR4</displayName>
<description>ADC group regular sequencer ranks register
4</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SQ16</name>
<description>ADC group regular sequencer rank
16</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>SQ15</name>
<description>ADC group regular sequencer rank
15</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DR</name>
<displayName>DR</displayName>
<description>ADC group regular conversion data
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATA</name>
<description>ADC group regular conversion
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>JSQR</name>
<displayName>JSQR</displayName>
<description>ADC group injected sequencer
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JSQ4</name>
<description>ADC group injected sequencer rank
4</description>
<bitOffset>27</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JSQ3</name>
<description>ADC group injected sequencer rank
3</description>
<bitOffset>21</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JSQ2</name>
<description>ADC group injected sequencer rank
2</description>
<bitOffset>15</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JSQ1</name>
<description>ADC group injected sequencer rank
1</description>
<bitOffset>9</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JEXTEN</name>
<description>ADC group injected external trigger
polarity</description>
<bitOffset>7</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>JEXTSEL</name>
<description>ADC group injected external trigger
source</description>
<bitOffset>2</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JL</name>
<description>ADC group injected sequencer scan
length</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OFR1</name>
<displayName>OFR1</displayName>
<description>ADC offset number 1 register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SSATE</name>
<description>ADC offset number 1 enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSET1_CH</name>
<description>ADC offset number 1 channel
selection</description>
<bitOffset>26</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET1</name>
<description>ADC offset number 1 offset
level</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>OFR2</name>
<displayName>OFR2</displayName>
<description>ADC offset number 2 register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SSATE</name>
<description>ADC offset number 1 enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSET1_CH</name>
<description>ADC offset number 1 channel
selection</description>
<bitOffset>26</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET1</name>
<description>ADC offset number 1 offset
level</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>OFR3</name>
<displayName>OFR3</displayName>
<description>ADC offset number 3 register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SSATE</name>
<description>ADC offset number 1 enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSET1_CH</name>
<description>ADC offset number 1 channel
selection</description>
<bitOffset>26</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET1</name>
<description>ADC offset number 1 offset
level</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>OFR4</name>
<displayName>OFR4</displayName>
<description>ADC offset number 4 register</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SSATE</name>
<description>ADC offset number 1 enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSET1_CH</name>
<description>ADC offset number 1 channel
selection</description>
<bitOffset>26</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET1</name>
<description>ADC offset number 1 offset
level</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>JDR1</name>
<displayName>JDR1</displayName>
<description>ADC group injected sequencer rank 1
register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATA1</name>
<description>ADC group injected sequencer rank 1
conversion data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>JDR2</name>
<displayName>JDR2</displayName>
<description>ADC group injected sequencer rank 2
register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATA2</name>
<description>ADC group injected sequencer rank 2
conversion data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>JDR3</name>
<displayName>JDR3</displayName>
<description>ADC group injected sequencer rank 3
register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATA3</name>
<description>ADC group injected sequencer rank 3
conversion data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>JDR4</name>
<displayName>JDR4</displayName>
<description>ADC group injected sequencer rank 4
register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATA4</name>
<description>ADC group injected sequencer rank 4
conversion data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>AWD2CR</name>
<displayName>AWD2CR</displayName>
<description>ADC analog watchdog 2 configuration
register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AWD2CH</name>
<description>ADC analog watchdog 2 monitored channel
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>AWD3CR</name>
<displayName>AWD3CR</displayName>
<description>ADC analog watchdog 3 configuration
register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AWD3CH</name>
<description>ADC analog watchdog 3 monitored channel
selection</description>
<bitOffset>1</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIFSEL</name>
<displayName>DIFSEL</displayName>
<description>ADC channel differential or single-ended
mode selection register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIFSEL</name>
<description>ADC channel differential or single-ended
mode for channel</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>CALFACT</name>
<displayName>CALFACT</displayName>
<description>ADC calibration factors
register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CALFACT_D</name>
<description>ADC calibration factor in differential
mode</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>CALFACT_S</name>
<description>ADC calibration factor in single-ended
mode</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>PCSEL</name>
<displayName>PCSEL</displayName>
<description>ADC pre channel selection
register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCSEL</name>
<description>Channel x (VINP[i]) pre
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>LTR2</name>
<displayName>LTR2</displayName>
<description>ADC watchdog lower threshold register
2</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTR2</name>
<description>Analog watchdog 2 lower
threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>HTR2</name>
<displayName>HTR2</displayName>
<description>ADC watchdog higher threshold register
2</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HTR2</name>
<description>Analog watchdog 2 higher
threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>LTR3</name>
<displayName>LTR3</displayName>
<description>ADC watchdog lower threshold register
3</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTR3</name>
<description>Analog watchdog 3 lower
threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>HTR3</name>
<displayName>HTR3</displayName>
<description>ADC watchdog higher threshold register
3</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HTR3</name>
<description>Analog watchdog 3 higher
threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>CALFACT2</name>
<displayName>CALFACT2</displayName>
<description>ADC Calibration Factor register
2</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LINCALFACT</name>
<description>Linearity Calibration
Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="ADC3">
<name>ADC1</name>
<baseAddress>0x40022000</baseAddress>
</peripheral>
<peripheral derivedFrom="ADC3">
<name>ADC2</name>
<baseAddress>0x40022100</baseAddress>
</peripheral>
<peripheral>
<name>ADC3_Common</name>
<description>Analog-to-Digital Converter</description>
<groupName>ADC</groupName>
<baseAddress>0x58026300</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x100</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CSR</name>
<displayName>CSR</displayName>
<description>ADC Common status register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADRDY_MST</name>
<description>Master ADC ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOSMP_MST</name>
<description>End of Sampling phase flag of the master
ADC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOC_MST</name>
<description>End of regular conversion of the master
ADC</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOS_MST</name>
<description>End of regular sequence flag of the
master ADC</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR_MST</name>
<description>Overrun flag of the master
ADC</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOC_MST</name>
<description>End of injected conversion flag of the
master ADC</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOS_MST</name>
<description>End of injected sequence flag of the
master ADC</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD1_MST</name>
<description>Analog watchdog 1 flag of the master
ADC</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD2_MST</name>
<description>Analog watchdog 2 flag of the master
ADC</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD3_MST</name>
<description>Analog watchdog 3 flag of the master
ADC</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JQOVF_MST</name>
<description>Injected Context Queue Overflow flag of
the master ADC</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADRDY_SLV</name>
<description>Slave ADC ready</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOSMP_SLV</name>
<description>End of Sampling phase flag of the slave
ADC</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOC_SLV</name>
<description>End of regular conversion of the slave
ADC</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOS_SLV</name>
<description>End of regular sequence flag of the
slave ADC</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR_SLV</name>
<description>Overrun flag of the slave
ADC</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOC_SLV</name>
<description>End of injected conversion flag of the
slave ADC</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEOS_SLV</name>
<description>End of injected sequence flag of the
slave ADC</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD1_SLV</name>
<description>Analog watchdog 1 flag of the slave
ADC</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD2_SLV</name>
<description>Analog watchdog 2 flag of the slave
ADC</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWD3_SLV</name>
<description>Analog watchdog 3 flag of the slave
ADC</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JQOVF_SLV</name>
<description>Injected Context Queue Overflow flag of
the slave ADC</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<displayName>CCR</displayName>
<description>ADC common control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DUAL</name>
<description>Dual ADC mode selection</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DELAY</name>
<description>Delay between 2 sampling
phases</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DAMDF</name>
<description>Dual ADC Mode Data Format</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKMODE</name>
<description>ADC clock mode</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PRESC</name>
<description>ADC prescaler</description>
<bitOffset>18</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VREFEN</name>
<description>VREFINT enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSENSEEN</name>
<description>Temperature sensor enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VBATEN</name>
<description>VBAT enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CDR</name>
<displayName>CDR</displayName>
<description>ADC common regular data register for dual
and triple modes</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATA_SLV</name>
<description>Regular data of the slave
ADC</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>RDATA_MST</name>
<description>Regular data of the master
ADC</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CDR2</name>
<displayName>CDR2</displayName>
<description>ADC x common regular data register for
32-bit dual mode</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATA_ALT</name>
<description>Regular data of the master/slave
alternated ADCs</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="ADC3_Common">
<name>ADC12_Common</name>
<baseAddress>0x40022300</baseAddress>
<interrupt>
<name>ADC1_2</name>
<description>ADC1 and ADC2</description>
<value>18</value>
</interrupt>
</peripheral>
<peripheral>
<name>CRC</name>
<description>Cryptographic processor</description>
<groupName>CRC</groupName>
<baseAddress>0x58024C00</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>DR</name>
<displayName>DR</displayName>
<description>Data register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DR</name>
<description>Data Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<displayName>IDR</displayName>
<description>Independent Data register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDR</name>
<description>Independent Data register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>Control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RESET</name>
<description>RESET bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>POLYSIZE</name>
<description>Polynomial size</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REV_IN</name>
<description>Reverse input data</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REV_OUT</name>
<description>Reverse output data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>INIT</name>
<displayName>INIT</displayName>
<description>Initial CRC value</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>CRC_INIT</name>
<description>Programmable initial CRC
value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>POL</name>
<displayName>POL</displayName>
<description>CRC polynomial</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x04C11DB7</resetValue>
<fields>
<field>
<name>POL</name>
<description>Programmable polynomial</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RCC</name>
<description>Reset and clock control</description>
<groupName>RCC</groupName>
<baseAddress>0x58024400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>RCC</name>
<description>RCC global interrupt</description>
<value>5</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>clock control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000083</resetValue>
<fields>
<field>
<name>HSION</name>
<description>Internal high-speed clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSIKERON</name>
<description>High Speed Internal clock enable in Stop
mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSIRDY</name>
<description>HSI clock ready flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSIDIV</name>
<description>HSI clock divider</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>HSIDIVF</name>
<description>HSI divider flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSION</name>
<description>CSI clock enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSIRDY</name>
<description>CSI clock ready flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSIKERON</name>
<description>CSI clock enable in Stop
mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RC48ON</name>
<description>RC48 clock enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RC48RDY</name>
<description>RC48 clock ready flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D1CKRDY</name>
<description>D1 domain clocks ready
flag</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D2CKRDY</name>
<description>D2 domain clocks ready
flag</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSEON</name>
<description>HSE clock enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSERDY</name>
<description>HSE clock ready flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSEBYP</name>
<description>HSE clock bypass</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSECSSON</name>
<description>HSE Clock Security System
enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1ON</name>
<description>PLL1 enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1RDY</name>
<description>PLL1 clock ready flag</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2ON</name>
<description>PLL2 enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2RDY</name>
<description>PLL2 clock ready flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3ON</name>
<description>PLL3 enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3RDY</name>
<description>PLL3 clock ready flag</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICSCR</name>
<displayName>ICSCR</displayName>
<description>RCC Internal Clock Source Calibration
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<resetValue>0x40000000</resetValue>
<fields>
<field>
<name>HSICAL</name>
<description>HSI clock calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
<field>
<name>HSITRIM</name>
<description>HSI clock trimming</description>
<bitOffset>12</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSICAL</name>
<description>CSI clock calibration</description>
<bitOffset>18</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSITRIM</name>
<description>CSI clock trimming</description>
<bitOffset>26</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CRRCR</name>
<displayName>CRRCR</displayName>
<description>RCC Clock Recovery RC Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC48CAL</name>
<description>Internal RC 48 MHz clock
calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>RCC Clock Configuration
Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SW</name>
<description>System clock switch</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SWS</name>
<description>System clock switch status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>STOPWUCK</name>
<description>System clock selection after a wake up
from system Stop</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOPKERWUCK</name>
<description>Kernel clock selection after a wake up
from system Stop</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCPRE</name>
<description>HSE division factor for RTC
clock</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HRTIMSEL</name>
<description>High Resolution Timer clock prescaler
selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMPRE</name>
<description>Timers clocks prescaler
selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCO1PRE</name>
<description>MCO1 prescaler</description>
<bitOffset>18</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MCO1SEL</name>
<description>Micro-controller clock output
1</description>
<bitOffset>22</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MCO2PRE</name>
<description>MCO2 prescaler</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MCO2SEL</name>
<description>Micro-controller clock output
2</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>D1CFGR</name>
<displayName>D1CFGR</displayName>
<description>RCC Domain 1 Clock Configuration
Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HPRE</name>
<description>D1 domain AHB prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>D1PPRE</name>
<description>D1 domain APB3 prescaler</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>D1CPRE</name>
<description>D1 domain Core prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>D2CFGR</name>
<displayName>D2CFGR</displayName>
<description>RCC Domain 2 Clock Configuration
Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>D2PPRE1</name>
<description>D2 domain APB1 prescaler</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>D2PPRE2</name>
<description>D2 domain APB2 prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3CFGR</name>
<displayName>D3CFGR</displayName>
<description>RCC Domain 3 Clock Configuration
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>D3PPRE</name>
<description>D3 domain APB4 prescaler</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLLCKSELR</name>
<displayName>PLLCKSELR</displayName>
<description>RCC PLLs Clock Source Selection
Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x02020200</resetValue>
<fields>
<field>
<name>PLLSRC</name>
<description>DIVMx and PLLs clock source
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DIVM1</name>
<description>Prescaler for PLL1</description>
<bitOffset>4</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DIVM2</name>
<description>Prescaler for PLL2</description>
<bitOffset>12</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DIVM3</name>
<description>Prescaler for PLL3</description>
<bitOffset>20</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLLCFGR</name>
<displayName>PLLCFGR</displayName>
<description>RCC PLLs Configuration
Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x01FF0000</resetValue>
<fields>
<field>
<name>PLL1FRACEN</name>
<description>PLL1 fractional latch
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1VCOSEL</name>
<description>PLL1 VCO selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1RGE</name>
<description>PLL1 input frequency range</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PLL2FRACEN</name>
<description>PLL2 fractional latch
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2VCOSEL</name>
<description>PLL2 VCO selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2RGE</name>
<description>PLL2 input frequency range</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PLL3FRACEN</name>
<description>PLL3 fractional latch
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3VCOSEL</name>
<description>PLL3 VCO selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3RGE</name>
<description>PLL3 input frequency range</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DIVP1EN</name>
<description>PLL1 DIVP divider output
enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVQ1EN</name>
<description>PLL1 DIVQ divider output
enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVR1EN</name>
<description>PLL1 DIVR divider output
enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVP2EN</name>
<description>PLL2 DIVP divider output
enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVQ2EN</name>
<description>PLL2 DIVQ divider output
enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVR2EN</name>
<description>PLL2 DIVR divider output
enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVP3EN</name>
<description>PLL3 DIVP divider output
enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVQ3EN</name>
<description>PLL3 DIVQ divider output
enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVR3EN</name>
<description>PLL3 DIVR divider output
enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLL1DIVR</name>
<displayName>PLL1DIVR</displayName>
<description>RCC PLL1 Dividers Configuration
Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x01010280</resetValue>
<fields>
<field>
<name>DIVN1</name>
<description>Multiplication factor for PLL1
VCO</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DIVP1</name>
<description>PLL1 DIVP division factor</description>
<bitOffset>9</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>DIVQ1</name>
<description>PLL1 DIVQ division factor</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>DIVR1</name>
<description>PLL1 DIVR division factor</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLL1FRACR</name>
<displayName>PLL1FRACR</displayName>
<description>RCC PLL1 Fractional Divider
Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRACN1</name>
<description>Fractional part of the multiplication
factor for PLL1 VCO</description>
<bitOffset>3</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLL2DIVR</name>
<displayName>PLL2DIVR</displayName>
<description>RCC PLL2 Dividers Configuration
Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x01010280</resetValue>
<fields>
<field>
<name>DIVN2</name>
<description>Multiplication factor for PLL1
VCO</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DIVP2</name>
<description>PLL1 DIVP division factor</description>
<bitOffset>9</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>DIVQ2</name>
<description>PLL1 DIVQ division factor</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>DIVR2</name>
<description>PLL1 DIVR division factor</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLL2FRACR</name>
<displayName>PLL2FRACR</displayName>
<description>RCC PLL2 Fractional Divider
Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRACN2</name>
<description>Fractional part of the multiplication
factor for PLL VCO</description>
<bitOffset>3</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLL3DIVR</name>
<displayName>PLL3DIVR</displayName>
<description>RCC PLL3 Dividers Configuration
Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x01010280</resetValue>
<fields>
<field>
<name>DIVN3</name>
<description>Multiplication factor for PLL1
VCO</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DIVP3</name>
<description>PLL DIVP division factor</description>
<bitOffset>9</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>DIVQ3</name>
<description>PLL DIVQ division factor</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>DIVR3</name>
<description>PLL DIVR division factor</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>PLL3FRACR</name>
<displayName>PLL3FRACR</displayName>
<description>RCC PLL3 Fractional Divider
Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRACN3</name>
<description>Fractional part of the multiplication
factor for PLL3 VCO</description>
<bitOffset>3</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>D1CCIPR</name>
<displayName>D1CCIPR</displayName>
<description>RCC Domain 1 Kernel Clock Configuration
Register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FMCSRC</name>
<description>FMC kernel clock source
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>QSPISRC</name>
<description>QUADSPI kernel clock source
selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SDMMCSRC</name>
<description>SDMMC kernel clock source
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKPERSRC</name>
<description>per_ck clock source
selection</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>D2CCIP1R</name>
<displayName>D2CCIP1R</displayName>
<description>RCC Domain 2 Kernel Clock Configuration
Register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAI1SRC</name>
<description>SAI1 and DFSDM1 kernel Aclk clock source
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SAI23SRC</name>
<description>SAI2 and SAI3 kernel clock source
selection</description>
<bitOffset>6</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SPI123SRC</name>
<description>SPI/I2S1,2 and 3 kernel clock source
selection</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SPI45SRC</name>
<description>SPI4 and 5 kernel clock source
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SPDIFSRC</name>
<description>SPDIFRX kernel clock source
selection</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DFSDM1SRC</name>
<description>DFSDM1 kernel Clk clock source
selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDCANSRC</name>
<description>FDCAN kernel clock source
selection</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SWPSRC</name>
<description>SWPMI kernel clock source
selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D2CCIP2R</name>
<displayName>D2CCIP2R</displayName>
<description>RCC Domain 2 Kernel Clock Configuration
Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>USART234578SRC</name>
<description>USART2/3, UART4,5, 7/8 (APB1) kernel
clock source selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>USART16SRC</name>
<description>USART1 and 6 kernel clock source
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RNGSRC</name>
<description>RNG kernel clock source
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>I2C123SRC</name>
<description>I2C1,2,3 kernel clock source
selection</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>USBSRC</name>
<description>USBOTG 1 and 2 kernel clock source
selection</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CECSRC</name>
<description>HDMI-CEC kernel clock source
selection</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LPTIM1SRC</name>
<description>LPTIM1 kernel clock source
selection</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3CCIPR</name>
<displayName>D3CCIPR</displayName>
<description>RCC Domain 3 Kernel Clock Configuration
Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LPUART1SRC</name>
<description>LPUART1 kernel clock source
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>I2C4SRC</name>
<description>I2C4 kernel clock source
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LPTIM2SRC</name>
<description>LPTIM2 kernel clock source
selection</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>LPTIM345SRC</name>
<description>LPTIM3,4,5 kernel clock source
selection</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>ADCSRC</name>
<description>SAR ADC kernel clock source
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SAI4ASRC</name>
<description>Sub-Block A of SAI4 kernel clock source
selection</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SAI4BSRC</name>
<description>Sub-Block B of SAI4 kernel clock source
selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SPI6SRC</name>
<description>SPI6 kernel clock source
selection</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>CIER</name>
<displayName>CIER</displayName>
<description>RCC Clock Source Interrupt Enable
Register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LSIRDYIE</name>
<description>LSI ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSERDYIE</name>
<description>LSE ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSIRDYIE</name>
<description>HSI ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSERDYIE</name>
<description>HSE ready Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSIRDYIE</name>
<description>CSI ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RC48RDYIE</name>
<description>RC48 ready Interrupt
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1RDYIE</name>
<description>PLL1 ready Interrupt
Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2RDYIE</name>
<description>PLL2 ready Interrupt
Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3RDYIE</name>
<description>PLL3 ready Interrupt
Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSECSSIE</name>
<description>LSE clock security system Interrupt
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CIFR</name>
<displayName>CIFR</displayName>
<description>RCC Clock Source Interrupt Flag
Register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LSIRDYF</name>
<description>LSI ready Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSERDYF</name>
<description>LSE ready Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSIRDYF</name>
<description>HSI ready Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSERDYF</name>
<description>HSE ready Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSIRDY</name>
<description>CSI ready Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RC48RDYF</name>
<description>RC48 ready Interrupt Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1RDYF</name>
<description>PLL1 ready Interrupt Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2RDYF</name>
<description>PLL2 ready Interrupt Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3RDYF</name>
<description>PLL3 ready Interrupt Flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSECSSF</name>
<description>LSE clock security system Interrupt
Flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSECSSF</name>
<description>HSE clock security system Interrupt
Flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CICR</name>
<displayName>CICR</displayName>
<description>RCC Clock Source Interrupt Clear
Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LSIRDYC</name>
<description>LSI ready Interrupt Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSERDYC</name>
<description>LSE ready Interrupt Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSIRDYC</name>
<description>HSI ready Interrupt Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSERDYC</name>
<description>HSE ready Interrupt Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSE_ready_Interrupt_Clear</name>
<description>CSI ready Interrupt Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RC48RDYC</name>
<description>RC48 ready Interrupt Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL1RDYC</name>
<description>PLL1 ready Interrupt Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL2RDYC</name>
<description>PLL2 ready Interrupt Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLL3RDYC</name>
<description>PLL3 ready Interrupt Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSECSSC</name>
<description>LSE clock security system Interrupt
Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSECSSC</name>
<description>HSE clock security system Interrupt
Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDCR</name>
<displayName>BDCR</displayName>
<description>RCC Backup Domain Control
Register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LSEON</name>
<description>LSE oscillator enabled</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSERDY</name>
<description>LSE oscillator ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSEBYP</name>
<description>LSE oscillator bypass</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSEDRV</name>
<description>LSE oscillator driving
capability</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LSECSSON</name>
<description>LSE clock security system
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSECSSD</name>
<description>LSE clock security system failure
detection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCSRC</name>
<description>RTC clock source selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RTCEN</name>
<description>RTC clock enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSWRST</name>
<description>VSwitch domain software
reset</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<displayName>CSR</displayName>
<description>RCC Clock Control and Status
Register</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LSION</name>
<description>LSI oscillator enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSIRDY</name>
<description>LSI oscillator ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB3RSTR</name>
<displayName>AHB3RSTR</displayName>
<description>RCC AHB3 Reset Register</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDMARST</name>
<description>MDMA block reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2DRST</name>
<description>DMA2D block reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JPGDECRST</name>
<description>JPGDEC block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMCRST</name>
<description>FMC block reset</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPIRST</name>
<description>QUADSPI and QUADSPI delay block
reset</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC1RST</name>
<description>SDMMC1 and SDMMC1 delay block
reset</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPURST</name>
<description>CPU reset</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB1RSTR</name>
<displayName>AHB1RSTR</displayName>
<description>RCC AHB1 Peripheral Reset
Register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMA1RST</name>
<description>DMA1 block reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2RST</name>
<description>DMA2 block reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC12RST</name>
<description>ADC1&2 block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1MACRST</name>
<description>ETH1MAC block reset</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1OTGRST</name>
<description>USB1OTG block reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGRST</name>
<description>USB2OTG block reset</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB2RSTR</name>
<displayName>AHB2RSTR</displayName>
<description>RCC AHB2 Peripheral Reset
Register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CAMITFRST</name>
<description>CAMITF block reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRYPTRST</name>
<description>Cryptography block reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HASHRST</name>
<description>Hash block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RNGRST</name>
<description>Random Number Generator block
reset</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC2RST</name>
<description>SDMMC2 and SDMMC2 Delay block
reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB4RSTR</name>
<displayName>AHB4RSTR</displayName>
<description>RCC AHB4 Peripheral Reset
Register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GPIOARST</name>
<description>GPIO block reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOBRST</name>
<description>GPIO block reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOCRST</name>
<description>GPIO block reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIODRST</name>
<description>GPIO block reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOERST</name>
<description>GPIO block reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOFRST</name>
<description>GPIO block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOGRST</name>
<description>GPIO block reset</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOHRST</name>
<description>GPIO block reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOIRST</name>
<description>GPIO block reset</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOJRST</name>
<description>GPIO block reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOKRST</name>
<description>GPIO block reset</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCRST</name>
<description>CRC block reset</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BDMARST</name>
<description>BDMA block reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC3RST</name>
<description>ADC3 block reset</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSEMRST</name>
<description>HSEM block reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB3RSTR</name>
<displayName>APB3RSTR</displayName>
<description>RCC APB3 Peripheral Reset
Register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTDCRST</name>
<description>LTDC block reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1LRSTR</name>
<displayName>APB1LRSTR</displayName>
<description>RCC APB1 Peripheral Reset
Register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM2RST</name>
<description>TIM block reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM3RST</name>
<description>TIM block reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM4RST</name>
<description>TIM block reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM5RST</name>
<description>TIM block reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM6RST</name>
<description>TIM block reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM7RST</name>
<description>TIM block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM12RST</name>
<description>TIM block reset</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM13RST</name>
<description>TIM block reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM14RST</name>
<description>TIM block reset</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM1RST</name>
<description>TIM block reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI2RST</name>
<description>SPI2 block reset</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI3RST</name>
<description>SPI3 block reset</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDIFRXRST</name>
<description>SPDIFRX block reset</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART2RST</name>
<description>USART2 block reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART3RST</name>
<description>USART3 block reset</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART4RST</name>
<description>UART4 block reset</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART5RST</name>
<description>UART5 block reset</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C1RST</name>
<description>I2C1 block reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C2RST</name>
<description>I2C2 block reset</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C3RST</name>
<description>I2C3 block reset</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CECRST</name>
<description>HDMI-CEC block reset</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC12RST</name>
<description>DAC1 and 2 Blocks Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART7RST</name>
<description>USART7 block reset</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART8RST</name>
<description>USART8 block reset</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1HRSTR</name>
<displayName>APB1HRSTR</displayName>
<description>RCC APB1 Peripheral Reset
Register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRSRST</name>
<description>Clock Recovery System
reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPRST</name>
<description>SWPMI block reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPAMPRST</name>
<description>OPAMP block reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MDIOSRST</name>
<description>MDIOS block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDCANRST</name>
<description>FDCAN block reset</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB2RSTR</name>
<displayName>APB2RSTR</displayName>
<description>RCC APB2 Peripheral Reset
Register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM1RST</name>
<description>TIM1 block reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM8RST</name>
<description>TIM8 block reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART1RST</name>
<description>USART1 block reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART6RST</name>
<description>USART6 block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI1RST</name>
<description>SPI1 block reset</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI4RST</name>
<description>SPI4 block reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM15RST</name>
<description>TIM15 block reset</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM16RST</name>
<description>TIM16 block reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM17RST</name>
<description>TIM17 block reset</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI5RST</name>
<description>SPI5 block reset</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI1RST</name>
<description>SAI1 block reset</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI2RST</name>
<description>SAI2 block reset</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI3RST</name>
<description>SAI3 block reset</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDM1RST</name>
<description>DFSDM1 block reset</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HRTIMRST</name>
<description>HRTIM block reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB4RSTR</name>
<displayName>APB4RSTR</displayName>
<description>RCC APB4 Peripheral Reset
Register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYSCFGRST</name>
<description>SYSCFG block reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPUART1RST</name>
<description>LPUART1 block reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI6RST</name>
<description>SPI6 block reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4RST</name>
<description>I2C4 block reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM2RST</name>
<description>LPTIM2 block reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM3RST</name>
<description>LPTIM3 block reset</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM4RST</name>
<description>LPTIM4 block reset</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM5RST</name>
<description>LPTIM5 block reset</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP12RST</name>
<description>COMP12 Blocks Reset</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFRST</name>
<description>VREF block reset</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI4RST</name>
<description>SAI4 block reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>GCR</name>
<displayName>GCR</displayName>
<description>RCC Global Control Register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WW1RSC</name>
<description>WWDG1 reset scope control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3AMR</name>
<displayName>D3AMR</displayName>
<description>RCC D3 Autonomous mode
Register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BDMAAMEN</name>
<description>BDMA and DMAMUX Autonomous mode
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPUART1AMEN</name>
<description>LPUART1 Autonomous mode
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI6AMEN</name>
<description>SPI6 Autonomous mode
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4AMEN</name>
<description>I2C4 Autonomous mode
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM2AMEN</name>
<description>LPTIM2 Autonomous mode
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM3AMEN</name>
<description>LPTIM3 Autonomous mode
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM4AMEN</name>
<description>LPTIM4 Autonomous mode
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM5AMEN</name>
<description>LPTIM5 Autonomous mode
enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP12AMEN</name>
<description>COMP12 Autonomous mode
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFAMEN</name>
<description>VREF Autonomous mode
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCAMEN</name>
<description>RTC Autonomous mode enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCAMEN</name>
<description>CRC Autonomous mode enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI4AMEN</name>
<description>SAI4 Autonomous mode
enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC3AMEN</name>
<description>ADC3 Autonomous mode
enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKPRAMAMEN</name>
<description>Backup RAM Autonomous mode
enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM4AMEN</name>
<description>SRAM4 Autonomous mode
enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSR</name>
<displayName>RSR</displayName>
<description>RCC Reset Status Register</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RMVF</name>
<description>Remove reset flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPURSTF</name>
<description>CPU reset flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D1RSTF</name>
<description>D1 domain power switch reset
flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D2RSTF</name>
<description>D2 domain power switch reset
flag</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BORRSTF</name>
<description>BOR reset flag</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINRSTF</name>
<description>Pin reset flag (NRST)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORRSTF</name>
<description>POR/PDR reset flag</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFTRSTF</name>
<description>System reset from CPU reset
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWDG1RSTF</name>
<description>Independent Watchdog reset
flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WWDG1RSTF</name>
<description>Window Watchdog reset flag</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPWRRSTF</name>
<description>Reset due to illegal D1 DStandby or CPU
CStop flag</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_RSR</name>
<displayName>C1_RSR</displayName>
<description>RCC Reset Status Register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RMVF</name>
<description>Remove reset flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPURSTF</name>
<description>CPU reset flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D1RSTF</name>
<description>D1 domain power switch reset
flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D2RSTF</name>
<description>D2 domain power switch reset
flag</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BORRSTF</name>
<description>BOR reset flag</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINRSTF</name>
<description>Pin reset flag (NRST)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORRSTF</name>
<description>POR/PDR reset flag</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFTRSTF</name>
<description>System reset from CPU reset
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWDG1RSTF</name>
<description>Independent Watchdog reset
flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WWDG1RSTF</name>
<description>Window Watchdog reset flag</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPWRRSTF</name>
<description>Reset due to illegal D1 DStandby or CPU
CStop flag</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB3ENR</name>
<displayName>C1_AHB3ENR</displayName>
<description>RCC AHB3 Clock Register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDMAEN</name>
<description>MDMA Peripheral Clock
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2DEN</name>
<description>DMA2D Peripheral Clock
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JPGDECEN</name>
<description>JPGDEC Peripheral Clock
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMCEN</name>
<description>FMC Peripheral Clocks
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPIEN</name>
<description>QUADSPI and QUADSPI Delay Clock
Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC1EN</name>
<description>SDMMC1 and SDMMC1 Delay Clock
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB3ENR</name>
<displayName>AHB3ENR</displayName>
<description>RCC AHB3 Clock Register</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDMAEN</name>
<description>MDMA Peripheral Clock
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2DEN</name>
<description>DMA2D Peripheral Clock
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JPGDECEN</name>
<description>JPGDEC Peripheral Clock
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMCEN</name>
<description>FMC Peripheral Clocks
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPIEN</name>
<description>QUADSPI and QUADSPI Delay Clock
Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC1EN</name>
<description>SDMMC1 and SDMMC1 Delay Clock
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB1ENR</name>
<displayName>AHB1ENR</displayName>
<description>RCC AHB1 Clock Register</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMA1EN</name>
<description>DMA1 Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2EN</name>
<description>DMA2 Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC12EN</name>
<description>ADC1/2 Peripheral Clocks
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1MACEN</name>
<description>Ethernet MAC bus interface Clock
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1TXEN</name>
<description>Ethernet Transmission Clock
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1RXEN</name>
<description>Ethernet Reception Clock
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGHSULPIEN</name>
<description> Enable USB_PHY2 clocks </description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1OTGEN</name>
<description>USB1OTG Peripheral Clocks
Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1ULPIEN</name>
<description>USB_PHY1 Clocks Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGEN</name>
<description>USB2OTG Peripheral Clocks
Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2ULPIEN</name>
<description>USB_PHY2 Clocks Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB1ENR</name>
<displayName>C1_AHB1ENR</displayName>
<description>RCC AHB1 Clock Register</description>
<addressOffset>0x138</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMA1EN</name>
<description>DMA1 Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2EN</name>
<description>DMA2 Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC12EN</name>
<description>ADC1/2 Peripheral Clocks
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1MACEN</name>
<description>Ethernet MAC bus interface Clock
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1TXEN</name>
<description>Ethernet Transmission Clock
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1RXEN</name>
<description>Ethernet Reception Clock
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1OTGEN</name>
<description>USB1OTG Peripheral Clocks
Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1ULPIEN</name>
<description>USB_PHY1 Clocks Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGEN</name>
<description>USB2OTG Peripheral Clocks
Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2ULPIEN</name>
<description>USB_PHY2 Clocks Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB2ENR</name>
<displayName>C1_AHB2ENR</displayName>
<description>RCC AHB2 Clock Register</description>
<addressOffset>0x13C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CAMITFEN</name>
<description>CAMITF peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRYPTEN</name>
<description>CRYPT peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HASHEN</name>
<description>HASH peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RNGEN</name>
<description>RNG peripheral clocks
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC2EN</name>
<description>SDMMC2 and SDMMC2 delay clock
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM1EN</name>
<description>SRAM1 block enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM2EN</name>
<description>SRAM2 block enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM3EN</name>
<description>SRAM3 block enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB2ENR</name>
<displayName>AHB2ENR</displayName>
<description>RCC AHB2 Clock Register</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CAMITFEN</name>
<description>CAMITF peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRYPTEN</name>
<description>CRYPT peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HASHEN</name>
<description>HASH peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RNGEN</name>
<description>RNG peripheral clocks
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC2EN</name>
<description>SDMMC2 and SDMMC2 delay clock
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM1EN</name>
<description>SRAM1 block enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM2EN</name>
<description>SRAM2 block enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM3EN</name>
<description>SRAM3 block enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB4ENR</name>
<displayName>AHB4ENR</displayName>
<description>RCC AHB4 Clock Register</description>
<addressOffset>0xE0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GPIOAEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOBEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOCEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIODEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOEEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOFEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOGEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOHEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOIEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOJEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOKEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCEN</name>
<description>CRC peripheral clock
enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BDMAEN</name>
<description>BDMA and DMAMUX2 Clock
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC3EN</name>
<description>ADC3 Peripheral Clocks
Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSEMEN</name>
<description>HSEM peripheral clock
enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKPRAMEN</name>
<description>Backup RAM Clock Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB4ENR</name>
<displayName>C1_AHB4ENR</displayName>
<description>RCC AHB4 Clock Register</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GPIOAEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOBEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOCEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIODEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOEEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOFEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOGEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOHEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOIEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOJEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOKEN</name>
<description>0GPIO peripheral clock
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCEN</name>
<description>CRC peripheral clock
enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BDMAEN</name>
<description>BDMA and DMAMUX2 Clock
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC3EN</name>
<description>ADC3 Peripheral Clocks
Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSEMEN</name>
<description>HSEM peripheral clock
enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKPRAMEN</name>
<description>Backup RAM Clock Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB3ENR</name>
<displayName>C1_APB3ENR</displayName>
<description>RCC APB3 Clock Register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTDCEN</name>
<description>LTDC peripheral clock
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WWDG1EN</name>
<description>WWDG1 Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB3ENR</name>
<displayName>APB3ENR</displayName>
<description>RCC APB3 Clock Register</description>
<addressOffset>0xE4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTDCEN</name>
<description>LTDC peripheral clock
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WWDG1EN</name>
<description>WWDG1 Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1LENR</name>
<displayName>APB1LENR</displayName>
<description>RCC APB1 Clock Register</description>
<addressOffset>0xE8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM2EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM3EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM4EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM5EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM6EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM7EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM12EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM13EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM14EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM1EN</name>
<description>LPTIM1 Peripheral Clocks
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI2EN</name>
<description>SPI2 Peripheral Clocks
Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI3EN</name>
<description>SPI3 Peripheral Clocks
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDIFRXEN</name>
<description>SPDIFRX Peripheral Clocks
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART2EN</name>
<description>USART2 Peripheral Clocks
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART3EN</name>
<description>USART3 Peripheral Clocks
Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART4EN</name>
<description>UART4 Peripheral Clocks
Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART5EN</name>
<description>UART5 Peripheral Clocks
Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C1EN</name>
<description>I2C1 Peripheral Clocks
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C2EN</name>
<description>I2C2 Peripheral Clocks
Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C3EN</name>
<description>I2C3 Peripheral Clocks
Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CECEN</name>
<description>HDMI-CEC peripheral clock
enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC12EN</name>
<description>DAC1&2 peripheral clock
enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART7EN</name>
<description>USART7 Peripheral Clocks
Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART8EN</name>
<description>USART8 Peripheral Clocks
Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB1LENR</name>
<displayName>C1_APB1LENR</displayName>
<description>RCC APB1 Clock Register</description>
<addressOffset>0x148</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM2EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM3EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM4EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM5EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM6EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM7EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM12EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM13EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM14EN</name>
<description>TIM peripheral clock
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM1EN</name>
<description>LPTIM1 Peripheral Clocks
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI2EN</name>
<description>SPI2 Peripheral Clocks
Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI3EN</name>
<description>SPI3 Peripheral Clocks
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDIFRXEN</name>
<description>SPDIFRX Peripheral Clocks
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART2EN</name>
<description>USART2 Peripheral Clocks
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART3EN</name>
<description>USART3 Peripheral Clocks
Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART4EN</name>
<description>UART4 Peripheral Clocks
Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART5EN</name>
<description>UART5 Peripheral Clocks
Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C1EN</name>
<description>I2C1 Peripheral Clocks
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C2EN</name>
<description>I2C2 Peripheral Clocks
Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C3EN</name>
<description>I2C3 Peripheral Clocks
Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HDMICECEN</name>
<description>HDMI-CEC peripheral clock
enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC12EN</name>
<description>DAC1&2 peripheral clock
enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART7EN</name>
<description>USART7 Peripheral Clocks
Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART8EN</name>
<description>USART8 Peripheral Clocks
Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1HENR</name>
<displayName>APB1HENR</displayName>
<description>RCC APB1 Clock Register</description>
<addressOffset>0xEC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRSEN</name>
<description>Clock Recovery System peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPEN</name>
<description>SWPMI Peripheral Clocks
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPAMPEN</name>
<description>OPAMP peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MDIOSEN</name>
<description>MDIOS peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDCANEN</name>
<description>FDCAN Peripheral Clocks
Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB1HENR</name>
<displayName>C1_APB1HENR</displayName>
<description>RCC APB1 Clock Register</description>
<addressOffset>0x14C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRSEN</name>
<description>Clock Recovery System peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPEN</name>
<description>SWPMI Peripheral Clocks
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPAMPEN</name>
<description>OPAMP peripheral clock
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MDIOSEN</name>
<description>MDIOS peripheral clock
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDCANEN</name>
<description>FDCAN Peripheral Clocks
Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB2ENR</name>
<displayName>C1_APB2ENR</displayName>
<description>RCC APB2 Clock Register</description>
<addressOffset>0x150</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM1EN</name>
<description>TIM1 peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM8EN</name>
<description>TIM8 peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART1EN</name>
<description>USART1 Peripheral Clocks
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART6EN</name>
<description>USART6 Peripheral Clocks
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI1EN</name>
<description>SPI1 Peripheral Clocks
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI4EN</name>
<description>SPI4 Peripheral Clocks
Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM16EN</name>
<description>TIM16 peripheral clock
enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM15EN</name>
<description>TIM15 peripheral clock
enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM17EN</name>
<description>TIM17 peripheral clock
enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI5EN</name>
<description>SPI5 Peripheral Clocks
Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI1EN</name>
<description>SAI1 Peripheral Clocks
Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI2EN</name>
<description>SAI2 Peripheral Clocks
Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI3EN</name>
<description>SAI3 Peripheral Clocks
Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDM1EN</name>
<description>DFSDM1 Peripheral Clocks
Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HRTIMEN</name>
<description>HRTIM peripheral clock
enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB2ENR</name>
<displayName>APB2ENR</displayName>
<description>RCC APB2 Clock Register</description>
<addressOffset>0xF0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM1EN</name>
<description>TIM1 peripheral clock
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM8EN</name>
<description>TIM8 peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART1EN</name>
<description>USART1 Peripheral Clocks
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART6EN</name>
<description>USART6 Peripheral Clocks
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI1EN</name>
<description>SPI1 Peripheral Clocks
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI4EN</name>
<description>SPI4 Peripheral Clocks
Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM16EN</name>
<description>TIM16 peripheral clock
enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM15EN</name>
<description>TIM15 peripheral clock
enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM17EN</name>
<description>TIM17 peripheral clock
enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI5EN</name>
<description>SPI5 Peripheral Clocks
Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI1EN</name>
<description>SAI1 Peripheral Clocks
Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI2EN</name>
<description>SAI2 Peripheral Clocks
Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI3EN</name>
<description>SAI3 Peripheral Clocks
Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDM1EN</name>
<description>DFSDM1 Peripheral Clocks
Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HRTIMEN</name>
<description>HRTIM peripheral clock
enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB4ENR</name>
<displayName>APB4ENR</displayName>
<description>RCC APB4 Clock Register</description>
<addressOffset>0xF4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYSCFGEN</name>
<description>SYSCFG peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPUART1EN</name>
<description>LPUART1 Peripheral Clocks
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI6EN</name>
<description>SPI6 Peripheral Clocks
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4EN</name>
<description>I2C4 Peripheral Clocks
Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM2EN</name>
<description>LPTIM2 Peripheral Clocks
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM3EN</name>
<description>LPTIM3 Peripheral Clocks
Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM4EN</name>
<description>LPTIM4 Peripheral Clocks
Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM5EN</name>
<description>LPTIM5 Peripheral Clocks
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP12EN</name>
<description>COMP1/2 peripheral clock
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFEN</name>
<description>VREF peripheral clock
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCAPBEN</name>
<description>RTC APB Clock Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI4EN</name>
<description>SAI4 Peripheral Clocks
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB4ENR</name>
<displayName>C1_APB4ENR</displayName>
<description>RCC APB4 Clock Register</description>
<addressOffset>0x154</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYSCFGEN</name>
<description>SYSCFG peripheral clock
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPUART1EN</name>
<description>LPUART1 Peripheral Clocks
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI6EN</name>
<description>SPI6 Peripheral Clocks
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4EN</name>
<description>I2C4 Peripheral Clocks
Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM2EN</name>
<description>LPTIM2 Peripheral Clocks
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM3EN</name>
<description>LPTIM3 Peripheral Clocks
Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM4EN</name>
<description>LPTIM4 Peripheral Clocks
Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM5EN</name>
<description>LPTIM5 Peripheral Clocks
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP12EN</name>
<description>COMP1/2 peripheral clock
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFEN</name>
<description>VREF peripheral clock
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCAPBEN</name>
<description>RTC APB Clock Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI4EN</name>
<description>SAI4 Peripheral Clocks
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB3LPENR</name>
<displayName>C1_AHB3LPENR</displayName>
<description>RCC AHB3 Sleep Clock Register</description>
<addressOffset>0x15C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDMALPEN</name>
<description>MDMA Clock Enable During CSleep
Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2DLPEN</name>
<description>DMA2D Clock Enable During CSleep
Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JPGDECLPEN</name>
<description>JPGDEC Clock Enable During CSleep
Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLITFLPEN</name>
<description>FLITF Clock Enable During CSleep
Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMCLPEN</name>
<description>FMC Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPILPEN</name>
<description>QUADSPI and QUADSPI Delay Clock Enable
During CSleep Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC1LPEN</name>
<description>SDMMC1 and SDMMC1 Delay Clock Enable
During CSleep Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D1DTCM1LPEN</name>
<description>D1DTCM1 Block Clock Enable During CSleep
mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTCM2LPEN</name>
<description>D1 DTCM2 Block Clock Enable During
CSleep mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITCMLPEN</name>
<description>D1ITCM Block Clock Enable During CSleep
mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AXISRAMLPEN</name>
<description>AXISRAM Block Clock Enable During CSleep
mode</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB3LPENR</name>
<displayName>AHB3LPENR</displayName>
<description>RCC AHB3 Sleep Clock Register</description>
<addressOffset>0xFC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MDMALPEN</name>
<description>MDMA Clock Enable During CSleep
Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2DLPEN</name>
<description>DMA2D Clock Enable During CSleep
Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JPGDECLPEN</name>
<description>JPGDEC Clock Enable During CSleep
Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLASHLPEN</name>
<description>FLITF Clock Enable During CSleep
Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMCLPEN</name>
<description>FMC Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPILPEN</name>
<description>QUADSPI and QUADSPI Delay Clock Enable
During CSleep Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC1LPEN</name>
<description>SDMMC1 and SDMMC1 Delay Clock Enable
During CSleep Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D1DTCM1LPEN</name>
<description>D1DTCM1 Block Clock Enable During CSleep
mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTCM2LPEN</name>
<description>D1 DTCM2 Block Clock Enable During
CSleep mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITCMLPEN</name>
<description>D1ITCM Block Clock Enable During CSleep
mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AXISRAMLPEN</name>
<description>AXISRAM Block Clock Enable During CSleep
mode</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB1LPENR</name>
<displayName>AHB1LPENR</displayName>
<description>RCC AHB1 Sleep Clock Register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMA1LPEN</name>
<description>DMA1 Clock Enable During CSleep
Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2LPEN</name>
<description>DMA2 Clock Enable During CSleep
Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC12LPEN</name>
<description>ADC1/2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1MACLPEN</name>
<description>Ethernet MAC bus interface Clock Enable
During CSleep Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1TXLPEN</name>
<description>Ethernet Transmission Clock Enable
During CSleep Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1RXLPEN</name>
<description>Ethernet Reception Clock Enable During
CSleep Mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1OTGHSLPEN</name>
<description>USB1OTG peripheral clock enable during
CSleep mode</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1OTGHSULPILPEN</name>
<description>USB_PHY1 clock enable during CSleep
mode</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGHSLPEN</name>
<description>USB2OTG peripheral clock enable during
CSleep mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGHSULPILPEN</name>
<description>USB_PHY2 clocks enable during CSleep
mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB1LPENR</name>
<displayName>C1_AHB1LPENR</displayName>
<description>RCC AHB1 Sleep Clock Register</description>
<addressOffset>0x160</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMA1LPEN</name>
<description>DMA1 Clock Enable During CSleep
Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMA2LPEN</name>
<description>DMA2 Clock Enable During CSleep
Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC12LPEN</name>
<description>ADC1/2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1MACLPEN</name>
<description>Ethernet MAC bus interface Clock Enable
During CSleep Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1TXLPEN</name>
<description>Ethernet Transmission Clock Enable
During CSleep Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETH1RXLPEN</name>
<description>Ethernet Reception Clock Enable During
CSleep Mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1OTGLPEN</name>
<description>USB1OTG peripheral clock enable during
CSleep mode</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB1ULPILPEN</name>
<description>USB_PHY1 clock enable during CSleep
mode</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2OTGLPEN</name>
<description>USB2OTG peripheral clock enable during
CSleep mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB2ULPILPEN</name>
<description>USB_PHY2 clocks enable during CSleep
mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB2LPENR</name>
<displayName>C1_AHB2LPENR</displayName>
<description>RCC AHB2 Sleep Clock Register</description>
<addressOffset>0x164</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CAMITFLPEN</name>
<description>CAMITF peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRYPTLPEN</name>
<description>CRYPT peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HASHLPEN</name>
<description>HASH peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC2LPEN</name>
<description>SDMMC2 and SDMMC2 Delay Clock Enable
During CSleep Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RNGLPEN</name>
<description>RNG peripheral clock enable during
CSleep mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM1LPEN</name>
<description>SRAM1 Clock Enable During CSleep
Mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM2LPEN</name>
<description>SRAM2 Clock Enable During CSleep
Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM3LPEN</name>
<description>SRAM3 Clock Enable During CSleep
Mode</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB2LPENR</name>
<displayName>AHB2LPENR</displayName>
<description>RCC AHB2 Sleep Clock Register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CAMITFLPEN</name>
<description>CAMITF peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRYPTLPEN</name>
<description>CRYPT peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HASHLPEN</name>
<description>HASH peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDMMC2LPEN</name>
<description>SDMMC2 and SDMMC2 Delay Clock Enable
During CSleep Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RNGLPEN</name>
<description>RNG peripheral clock enable during
CSleep mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM1LPEN</name>
<description>SRAM1 Clock Enable During CSleep
Mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM2LPEN</name>
<description>SRAM2 Clock Enable During CSleep
Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM3LPEN</name>
<description>SRAM3 Clock Enable During CSleep
Mode</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AHB4LPENR</name>
<displayName>AHB4LPENR</displayName>
<description>RCC AHB4 Sleep Clock Register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GPIOALPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOBLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOCLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIODLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOELPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOFLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOGLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOHLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOILPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOJLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOKLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCLPEN</name>
<description>CRC peripheral clock enable during
CSleep mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BDMALPEN</name>
<description>BDMA Clock Enable During CSleep
Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC3LPEN</name>
<description>ADC3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKPRAMLPEN</name>
<description>Backup RAM Clock Enable During CSleep
Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM4LPEN</name>
<description>SRAM4 Clock Enable During CSleep
Mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_AHB4LPENR</name>
<displayName>C1_AHB4LPENR</displayName>
<description>RCC AHB4 Sleep Clock Register</description>
<addressOffset>0x168</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GPIOALPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOBLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOCLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIODLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOELPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOFLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOGLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOHLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOILPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOJLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPIOKLPEN</name>
<description>GPIO peripheral clock enable during
CSleep mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCLPEN</name>
<description>CRC peripheral clock enable during
CSleep mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BDMALPEN</name>
<description>BDMA Clock Enable During CSleep
Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC3LPEN</name>
<description>ADC3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKPRAMLPEN</name>
<description>Backup RAM Clock Enable During CSleep
Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRAM4LPEN</name>
<description>SRAM4 Clock Enable During CSleep
Mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB3LPENR</name>
<displayName>C1_APB3LPENR</displayName>
<description>RCC APB3 Sleep Clock Register</description>
<addressOffset>0x16C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTDCLPEN</name>
<description>LTDC peripheral clock enable during
CSleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WWDG1LPEN</name>
<description>WWDG1 Clock Enable During CSleep
Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB3LPENR</name>
<displayName>APB3LPENR</displayName>
<description>RCC APB3 Sleep Clock Register</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTDCLPEN</name>
<description>LTDC peripheral clock enable during
CSleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WWDG1LPEN</name>
<description>WWDG1 Clock Enable During CSleep
Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1LLPENR</name>
<displayName>APB1LLPENR</displayName>
<description>RCC APB1 Low Sleep Clock
Register</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM2LPEN</name>
<description>TIM2 peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM3LPEN</name>
<description>TIM3 peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM4LPEN</name>
<description>TIM4 peripheral clock enable during
CSleep mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM5LPEN</name>
<description>TIM5 peripheral clock enable during
CSleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM6LPEN</name>
<description>TIM6 peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM7LPEN</name>
<description>TIM7 peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM12LPEN</name>
<description>TIM12 peripheral clock enable during
CSleep mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM13LPEN</name>
<description>TIM13 peripheral clock enable during
CSleep mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM14LPEN</name>
<description>TIM14 peripheral clock enable during
CSleep mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM1LPEN</name>
<description>LPTIM1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI2LPEN</name>
<description>SPI2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI3LPEN</name>
<description>SPI3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDIFRXLPEN</name>
<description>SPDIFRX Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART2LPEN</name>
<description>USART2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART3LPEN</name>
<description>USART3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART4LPEN</name>
<description>UART4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART5LPEN</name>
<description>UART5 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C1LPEN</name>
<description>I2C1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C2LPEN</name>
<description>I2C2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C3LPEN</name>
<description>I2C3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HDMICECLPEN</name>
<description>HDMI-CEC Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC12LPEN</name>
<description>DAC1/2 peripheral clock enable during
CSleep mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART7LPEN</name>
<description>USART7 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART8LPEN</name>
<description>USART8 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB1LLPENR</name>
<displayName>C1_APB1LLPENR</displayName>
<description>RCC APB1 Low Sleep Clock
Register</description>
<addressOffset>0x170</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM2LPEN</name>
<description>TIM2 peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM3LPEN</name>
<description>TIM3 peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM4LPEN</name>
<description>TIM4 peripheral clock enable during
CSleep mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM5LPEN</name>
<description>TIM5 peripheral clock enable during
CSleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM6LPEN</name>
<description>TIM6 peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM7LPEN</name>
<description>TIM7 peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM12LPEN</name>
<description>TIM12 peripheral clock enable during
CSleep mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM13LPEN</name>
<description>TIM13 peripheral clock enable during
CSleep mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM14LPEN</name>
<description>TIM14 peripheral clock enable during
CSleep mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM1LPEN</name>
<description>LPTIM1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI2LPEN</name>
<description>SPI2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI3LPEN</name>
<description>SPI3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDIFRXLPEN</name>
<description>SPDIFRX Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART2LPEN</name>
<description>USART2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART3LPEN</name>
<description>USART3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART4LPEN</name>
<description>UART4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UART5LPEN</name>
<description>UART5 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C1LPEN</name>
<description>I2C1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C2LPEN</name>
<description>I2C2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C3LPEN</name>
<description>I2C3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HDMICECLPEN</name>
<description>HDMI-CEC Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC12LPEN</name>
<description>DAC1/2 peripheral clock enable during
CSleep mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART7LPEN</name>
<description>USART7 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART8LPEN</name>
<description>USART8 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB1HLPENR</name>
<displayName>C1_APB1HLPENR</displayName>
<description>RCC APB1 High Sleep Clock
Register</description>
<addressOffset>0x174</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRSLPEN</name>
<description>Clock Recovery System peripheral clock
enable during CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPLPEN</name>
<description>SWPMI Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPAMPLPEN</name>
<description>OPAMP peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MDIOSLPEN</name>
<description>MDIOS peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDCANLPEN</name>
<description>FDCAN Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1HLPENR</name>
<displayName>APB1HLPENR</displayName>
<description>RCC APB1 High Sleep Clock
Register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRSLPEN</name>
<description>Clock Recovery System peripheral clock
enable during CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPLPEN</name>
<description>SWPMI Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPAMPLPEN</name>
<description>OPAMP peripheral clock enable during
CSleep mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MDIOSLPEN</name>
<description>MDIOS peripheral clock enable during
CSleep mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDCANLPEN</name>
<description>FDCAN Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB2LPENR</name>
<displayName>APB2LPENR</displayName>
<description>RCC APB2 Sleep Clock Register</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM1LPEN</name>
<description>TIM1 peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM8LPEN</name>
<description>TIM8 peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART1LPEN</name>
<description>USART1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART6LPEN</name>
<description>USART6 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI1LPEN</name>
<description>SPI1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI4LPEN</name>
<description>SPI4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM15LPEN</name>
<description>TIM15 peripheral clock enable during
CSleep mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM16LPEN</name>
<description>TIM16 peripheral clock enable during
CSleep mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM17LPEN</name>
<description>TIM17 peripheral clock enable during
CSleep mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI5LPEN</name>
<description>SPI5 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI1LPEN</name>
<description>SAI1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI2LPEN</name>
<description>SAI2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI3LPEN</name>
<description>SAI3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDM1LPEN</name>
<description>DFSDM1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HRTIMLPEN</name>
<description>HRTIM peripheral clock enable during
CSleep mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB2LPENR</name>
<displayName>C1_APB2LPENR</displayName>
<description>RCC APB2 Sleep Clock Register</description>
<addressOffset>0x178</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIM1LPEN</name>
<description>TIM1 peripheral clock enable during
CSleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM8LPEN</name>
<description>TIM8 peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART1LPEN</name>
<description>USART1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USART6LPEN</name>
<description>USART6 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI1LPEN</name>
<description>SPI1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI4LPEN</name>
<description>SPI4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM15LPEN</name>
<description>TIM15 peripheral clock enable during
CSleep mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM16LPEN</name>
<description>TIM16 peripheral clock enable during
CSleep mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIM17LPEN</name>
<description>TIM17 peripheral clock enable during
CSleep mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI5LPEN</name>
<description>SPI5 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI1LPEN</name>
<description>SAI1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI2LPEN</name>
<description>SAI2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI3LPEN</name>
<description>SAI3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDM1LPEN</name>
<description>DFSDM1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HRTIMLPEN</name>
<description>HRTIM peripheral clock enable during
CSleep mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>C1_APB4LPENR</name>
<displayName>C1_APB4LPENR</displayName>
<description>RCC APB4 Sleep Clock Register</description>
<addressOffset>0x17C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYSCFGLPEN</name>
<description>SYSCFG peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPUART1LPEN</name>
<description>LPUART1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI6LPEN</name>
<description>SPI6 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4LPEN</name>
<description>I2C4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM2LPEN</name>
<description>LPTIM2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM3LPEN</name>
<description>LPTIM3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM4LPEN</name>
<description>LPTIM4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM5LPEN</name>
<description>LPTIM5 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP12LPEN</name>
<description>COMP1/2 peripheral clock enable during
CSleep mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFLPEN</name>
<description>VREF peripheral clock enable during
CSleep mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCAPBLPEN</name>
<description>RTC APB Clock Enable During CSleep
Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI4LPEN</name>
<description>SAI4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB4LPENR</name>
<displayName>APB4LPENR</displayName>
<description>RCC APB4 Sleep Clock Register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYSCFGLPEN</name>
<description>SYSCFG peripheral clock enable during
CSleep mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPUART1LPEN</name>
<description>LPUART1 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPI6LPEN</name>
<description>SPI6 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4LPEN</name>
<description>I2C4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM2LPEN</name>
<description>LPTIM2 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM3LPEN</name>
<description>LPTIM3 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM4LPEN</name>
<description>LPTIM4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPTIM5LPEN</name>
<description>LPTIM5 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP12LPEN</name>
<description>COMP1/2 peripheral clock enable during
CSleep mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFLPEN</name>
<description>VREF peripheral clock enable during
CSleep mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCAPBLPEN</name>
<description>RTC APB Clock Enable During CSleep
Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAI4LPEN</name>
<description>SAI4 Peripheral Clocks Enable During
CSleep Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>LPTIM1</name>
<description>Low power timer</description>
<groupName>LPTIM</groupName>
<baseAddress>0x40002400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>LPTIM1</name>
<description>LPTIM1 global interrupt</description>
<value>93</value>
</interrupt>
<registers>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Interrupt and Status Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOWN</name>
<description>Counter direction change up to
down</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UP</name>
<description>Counter direction change down to
up</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARROK</name>
<description>Autoreload register update
OK</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPOK</name>
<description>Compare register update OK</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTTRIG</name>
<description>External trigger edge
event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARRM</name>
<description>Autoreload match</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPM</name>
<description>Compare match</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Interrupt Clear Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOWNCF</name>
<description>Direction change to down Clear
Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPCF</name>
<description>Direction change to UP Clear
Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARROKCF</name>
<description>Autoreload register update OK Clear
Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPOKCF</name>
<description>Compare register update OK Clear
Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTTRIGCF</name>
<description>External trigger valid edge Clear
Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARRMCF</name>
<description>Autoreload match Clear
Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPMCF</name>
<description>compare match Clear Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>Interrupt Enable Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOWNIE</name>
<description>Direction change to down Interrupt
Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPIE</name>
<description>Direction change to UP Interrupt
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARROKIE</name>
<description>Autoreload register update OK Interrupt
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPOKIE</name>
<description>Compare register update OK Interrupt
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTTRIGIE</name>
<description>External trigger valid edge Interrupt
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARRMIE</name>
<description>Autoreload match Interrupt
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPMIE</name>
<description>Compare match Interrupt
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>Configuration Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENC</name>
<description>Encoder mode enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTMODE</name>
<description>counter mode enabled</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRELOAD</name>
<description>Registers update mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAVPOL</name>
<description>Waveform shape polarity</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAVE</name>
<description>Waveform shape</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMOUT</name>
<description>Timeout enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRIGEN</name>
<description>Trigger enable and
polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRIGSEL</name>
<description>Trigger selector</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>PRESC</name>
<description>Clock prescaler</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TRGFLT</name>
<description>Configurable digital filter for
trigger</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKFLT</name>
<description>Configurable digital filter for external
clock</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKPOL</name>
<description>Clock Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKSEL</name>
<description>Clock selector</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>Control Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>LPTIM Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNGSTRT</name>
<description>LPTIM start in single mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTSTRT</name>
<description>Timer start in continuous
mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTRST</name>
<description>Counter reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTARE</name>
<description>Reset after read enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP</name>
<displayName>CMP</displayName>
<description>Compare Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP</name>
<description>Compare value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>Autoreload Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Auto reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>Counter Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR2</name>
<displayName>CFGR2</displayName>
<description>LPTIM configuration register 2</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IN1SEL</name>
<description>LPTIM Input 1 selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IN2SEL</name>
<description>LPTIM Input 2 selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="LPTIM1">
<name>LPTIM2</name>
<baseAddress>0x58002400</baseAddress>
<interrupt>
<name>LPTIM2</name>
<description>LPTIM2 timer interrupt</description>
<value>138</value>
</interrupt>
</peripheral>
<peripheral>
<name>LPTIM3</name>
<description>Low power timer</description>
<groupName>LPTIM</groupName>
<baseAddress>0x58002800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>LPTIM3</name>
<description>LPTIM2 timer interrupt</description>
<value>139</value>
</interrupt>
<registers>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Interrupt and Status Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOWN</name>
<description>Counter direction change up to
down</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UP</name>
<description>Counter direction change down to
up</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARROK</name>
<description>Autoreload register update
OK</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPOK</name>
<description>Compare register update OK</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTTRIG</name>
<description>External trigger edge
event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARRM</name>
<description>Autoreload match</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPM</name>
<description>Compare match</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Interrupt Clear Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOWNCF</name>
<description>Direction change to down Clear
Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPCF</name>
<description>Direction change to UP Clear
Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARROKCF</name>
<description>Autoreload register update OK Clear
Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPOKCF</name>
<description>Compare register update OK Clear
Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTTRIGCF</name>
<description>External trigger valid edge Clear
Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARRMCF</name>
<description>Autoreload match Clear
Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPMCF</name>
<description>compare match Clear Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>Interrupt Enable Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOWNIE</name>
<description>Direction change to down Interrupt
Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPIE</name>
<description>Direction change to UP Interrupt
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARROKIE</name>
<description>Autoreload register update OK Interrupt
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPOKIE</name>
<description>Compare register update OK Interrupt
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTTRIGIE</name>
<description>External trigger valid edge Interrupt
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARRMIE</name>
<description>Autoreload match Interrupt
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPMIE</name>
<description>Compare match Interrupt
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>Configuration Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENC</name>
<description>Encoder mode enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTMODE</name>
<description>counter mode enabled</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRELOAD</name>
<description>Registers update mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAVPOL</name>
<description>Waveform shape polarity</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAVE</name>
<description>Waveform shape</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMOUT</name>
<description>Timeout enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRIGEN</name>
<description>Trigger enable and
polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRIGSEL</name>
<description>Trigger selector</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>PRESC</name>
<description>Clock prescaler</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TRGFLT</name>
<description>Configurable digital filter for
trigger</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKFLT</name>
<description>Configurable digital filter for external
clock</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKPOL</name>
<description>Clock Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKSEL</name>
<description>Clock selector</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>Control Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>LPTIM Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNGSTRT</name>
<description>LPTIM start in single mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTSTRT</name>
<description>Timer start in continuous
mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTRST</name>
<description>Counter reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTARE</name>
<description>Reset after read enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP</name>
<displayName>CMP</displayName>
<description>Compare Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP</name>
<description>Compare value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>Autoreload Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Auto reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>Counter Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR2</name>
<displayName>CFGR2</displayName>
<description>LPTIM configuration register 2</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IN1SEL</name>
<description>LPTIM Input 1 selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="LPTIM3">
<name>LPTIM4</name>
<baseAddress>0x58002C00</baseAddress>
<interrupt>
<name>ETH_WKUP</name>
<description>Ethernet wakeup through EXTI</description>
<value>62</value>
</interrupt>
<interrupt>
<name>LPTIM4</name>
<description>LPTIM2 timer interrupt</description>
<value>140</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="LPTIM3">
<name>LPTIM5</name>
<baseAddress>0x58003000</baseAddress>
<interrupt>
<name>LPTIM5</name>
<description>LPTIM2 timer interrupt</description>
<value>141</value>
</interrupt>
</peripheral>
<peripheral>
<name>LPUART1</name>
<description>LPUART1</description>
<groupName>LPUART</groupName>
<baseAddress>0x58000C00</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>LPUART</name>
<description>LPUART global interrupt</description>
<value>142</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>Control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RXFFIE</name>
<description>RXFIFO Full interrupt
enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFEIE</name>
<description>TXFIFO empty interrupt
enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FIFOEN</name>
<description>FIFO mode enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>M1</name>
<description>Word length</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEAT</name>
<description>Driver Enable assertion
time</description>
<bitOffset>21</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DEDT</name>
<description>Driver Enable deassertion
time</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>CMIE</name>
<description>Character match interrupt
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MME</name>
<description>Mute mode enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>M0</name>
<description>Word length</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKE</name>
<description>Receiver wakeup method</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCE</name>
<description>Parity control enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PS</name>
<description>Parity selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEIE</name>
<description>PE interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEIE</name>
<description>interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transmission complete interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNEIE</name>
<description>RXNE interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEIE</name>
<description>IDLE interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE</name>
<description>Transmitter enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RE</name>
<description>Receiver enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UESM</name>
<description>USART enable in Stop mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UE</name>
<description>USART enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>Control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>ADD</name>
<description>Address of the USART node</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MSBFIRST</name>
<description>Most significant bit first</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAINV</name>
<description>Binary data inversion</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXINV</name>
<description>TX pin active level
inversion</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXINV</name>
<description>RX pin active level
inversion</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP</name>
<description>Swap TX/RX pins</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOP</name>
<description>STOP bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ADDM7</name>
<description>7-bit Address Detection/4-bit Address
Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR3</name>
<displayName>CR3</displayName>
<description>Control register 3</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TXFTCFG</name>
<description>TXFIFO threshold
configuration</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RXFTIE</name>
<description>RXFIFO threshold interrupt
enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFTCFG</name>
<description>Receive FIFO threshold
configuration</description>
<bitOffset>25</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TXFTIE</name>
<description>TXFIFO threshold interrupt
enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUFIE</name>
<description>Wakeup from Stop mode interrupt
enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUS</name>
<description>Wakeup from Stop mode interrupt flag
selection</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DEP</name>
<description>Driver enable polarity
selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEM</name>
<description>Driver enable mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDRE</name>
<description>DMA Disable on Reception
Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRDIS</name>
<description>Overrun Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIE</name>
<description>CTS interrupt enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSE</name>
<description>CTS enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTSE</name>
<description>RTS enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAT</name>
<description>DMA enable transmitter</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAR</name>
<description>DMA enable receiver</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HDSEL</name>
<description>Half-duplex selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIE</name>
<description>Error interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BRR</name>
<displayName>BRR</displayName>
<description>Baud rate register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BRR</name>
<description>BRR</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>GTPR</name>
<displayName>GTPR</displayName>
<description>Guard time and prescaler
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>GT</name>
<description>Guard time value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<displayName>RTOR</displayName>
<description>Receiver timeout register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BLEN</name>
<description>Block Length</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RTO</name>
<description>Receiver timeout value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>RQR</name>
<displayName>RQR</displayName>
<description>Request register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TXFRQ</name>
<description>Transmit data flush
request</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFRQ</name>
<description>Receive data flush request</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMRQ</name>
<description>Mute mode request</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBKRQ</name>
<description>Send break request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABRRQ</name>
<description>Auto baud rate request</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Interrupt & status
register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00C0</resetValue>
<fields>
<field>
<name>TXFT</name>
<description>TXFIFO threshold flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFT</name>
<description>RXFIFO threshold flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFF</name>
<description>RXFIFO Full</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFE</name>
<description>TXFIFO Empty</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REACK</name>
<description>REACK</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEACK</name>
<description>TEACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUF</name>
<description>WUF</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RWU</name>
<description>RWU</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBKF</name>
<description>SBKF</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMF</name>
<description>CMF</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>BUSY</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTS</name>
<description>CTS</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIF</name>
<description>CTSIF</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXE</name>
<description>TXE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC</name>
<description>TC</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNE</name>
<description>RXNE</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLE</name>
<description>IDLE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ORE</name>
<description>ORE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NE</name>
<description>NE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FE</name>
<description>FE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PE</name>
<description>PE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Interrupt flag clear register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>WUCF</name>
<description>Wakeup from Stop mode clear
flag</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMCF</name>
<description>Character match clear flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSCF</name>
<description>CTS clear flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCF</name>
<description>Transmission complete clear
flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLECF</name>
<description>Idle line detected clear
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ORECF</name>
<description>Overrun error clear flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NCF</name>
<description>Noise detected clear flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FECF</name>
<description>Framing error clear flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PECF</name>
<description>Parity error clear flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<displayName>RDR</displayName>
<description>Receive data register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RDR</name>
<description>Receive data value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<displayName>TDR</displayName>
<description>Transmit data register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TDR</name>
<description>Transmit data value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRESC</name>
<displayName>PRESC</displayName>
<description>Prescaler register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PRESCALER</name>
<description>Clock prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SYSCFG</name>
<description>System configuration controller</description>
<groupName>SYSCFG</groupName>
<baseAddress>0x58000400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>PMCR</name>
<displayName>PMCR</displayName>
<description>peripheral mode configuration
register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>I2C1FMP</name>
<description>I2C1 Fm+</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C2FMP</name>
<description>I2C2 Fm+</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C3FMP</name>
<description>I2C3 Fm+</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2C4FMP</name>
<description>I2C4 Fm+</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PB6FMP</name>
<description>PB(6) Fm+</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PB7FMP</name>
<description>PB(7) Fast Mode Plus</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PB8FMP</name>
<description>PB(8) Fast Mode Plus</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PB9FMP</name>
<description>PB(9) Fm+</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOSTE</name>
<description>Booster Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOSTVDDSEL</name>
<description>Analog switch supply voltage selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPIS</name>
<description>Ethernet PHY Interface
Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>PA0SO</name>
<description>PA0 Switch Open</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PA1SO</name>
<description>PA1 Switch Open</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PC2SO</name>
<description>PC2 Switch Open</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PC3SO</name>
<description>PC3 Switch Open</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EXTICR1</name>
<displayName>EXTICR1</displayName>
<description>external interrupt configuration register
1</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EXTI3</name>
<description>EXTI x configuration (x = 0 to
3)</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI2</name>
<description>EXTI x configuration (x = 0 to
3)</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI1</name>
<description>EXTI x configuration (x = 0 to
3)</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI0</name>
<description>EXTI x configuration (x = 0 to
3)</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>EXTICR2</name>
<displayName>EXTICR2</displayName>
<description>external interrupt configuration register
2</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EXTI7</name>
<description>EXTI x configuration (x = 4 to
7)</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI6</name>
<description>EXTI x configuration (x = 4 to
7)</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI5</name>
<description>EXTI x configuration (x = 4 to
7)</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI4</name>
<description>EXTI x configuration (x = 4 to
7)</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>EXTICR3</name>
<displayName>EXTICR3</displayName>
<description>external interrupt configuration register
3</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EXTI11</name>
<description>EXTI x configuration (x = 8 to
11)</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI10</name>
<description>EXTI10</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI9</name>
<description>EXTI x configuration (x = 8 to
11)</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI8</name>
<description>EXTI x configuration (x = 8 to
11)</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>EXTICR4</name>
<displayName>EXTICR4</displayName>
<description>external interrupt configuration register
4</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EXTI15</name>
<description>EXTI x configuration (x = 12 to
15)</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI14</name>
<description>EXTI x configuration (x = 12 to
15)</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI13</name>
<description>EXTI x configuration (x = 12 to
15)</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EXTI12</name>
<description>EXTI x configuration (x = 12 to
15)</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCCSR</name>
<displayName>CCCSR</displayName>
<description>compensation cell control/status
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CS</name>
<description>Code selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READY</name>
<description>Compensation cell ready
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSLV</name>
<description>High-speed at low-voltage</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCVR</name>
<displayName>CCVR</displayName>
<description>SYSCFG compensation cell value
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NCV</name>
<description>NMOS compensation value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PCV</name>
<description>PMOS compensation value</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCCR</name>
<displayName>CCCR</displayName>
<description>SYSCFG compensation cell code
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NCC</name>
<description>NMOS compensation code</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PCC</name>
<description>PMOS compensation code</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>PWRCR</name>
<displayName>PWRCR</displayName>
<description>SYSCFG power control register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ODEN</name>
<description> Overdrive enable</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>PKGR</name>
<displayName>PKGR</displayName>
<description>SYSCFG package register</description>
<addressOffset>0x124</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PKG</name>
<description>Package</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR0</name>
<displayName>UR0</displayName>
<description>SYSCFG user register 0</description>
<addressOffset>0x300</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKS</name>
<description>Bank Swap</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDP</name>
<description>Readout protection</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR2</name>
<displayName>UR2</displayName>
<description>SYSCFG user register 2</description>
<addressOffset>0x308</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BORH</name>
<description>BOR_LVL Brownout Reset Threshold
Level</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>BOOT_ADD0</name>
<description>Boot Address 0</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR3</name>
<displayName>UR3</displayName>
<description>SYSCFG user register 3</description>
<addressOffset>0x30C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOOT_ADD1</name>
<description>Boot Address 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR4</name>
<displayName>UR4</displayName>
<description>SYSCFG user register 4</description>
<addressOffset>0x310</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MEPAD_1</name>
<description>Mass Erase Protected Area Disabled for
bank 1</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR5</name>
<displayName>UR5</displayName>
<description>SYSCFG user register 5</description>
<addressOffset>0x314</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MESAD_1</name>
<description>Mass erase secured area disabled for
bank 1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPN_1</name>
<description>Write protection for flash bank
1</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR6</name>
<displayName>UR6</displayName>
<description>SYSCFG user register 6</description>
<addressOffset>0x318</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA_BEG_1</name>
<description>Protected area start address for bank
1</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>PA_END_1</name>
<description>Protected area end address for bank
1</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR7</name>
<displayName>UR7</displayName>
<description>SYSCFG user register 7</description>
<addressOffset>0x31C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SA_BEG_1</name>
<description>Secured area start address for bank
1</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>SA_END_1</name>
<description>Secured area end address for bank
1</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR8</name>
<displayName>UR8</displayName>
<description>SYSCFG user register 8</description>
<addressOffset>0x320</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MEPAD_2</name>
<description>Mass erase protected area disabled for
bank 2</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MESAD_2</name>
<description>Mass erase secured area disabled for
bank 2</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR9</name>
<displayName>UR9</displayName>
<description>SYSCFG user register 9</description>
<addressOffset>0x324</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRPN_2</name>
<description>Write protection for flash bank
2</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>PA_BEG_2</name>
<description>Protected area start address for bank
2</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR10</name>
<displayName>UR10</displayName>
<description>SYSCFG user register 10</description>
<addressOffset>0x328</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA_END_2</name>
<description>Protected area end address for bank
2</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>SA_BEG_2</name>
<description>Secured area start address for bank
2</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR11</name>
<displayName>UR11</displayName>
<description>SYSCFG user register 11</description>
<addressOffset>0x32C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SA_END_2</name>
<description>Secured area end address for bank
2</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>IWDG1M</name>
<description>Independent Watchdog 1
mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR12</name>
<displayName>UR12</displayName>
<description>SYSCFG user register 12</description>
<addressOffset>0x330</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SECURE</name>
<description>Secure mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR13</name>
<displayName>UR13</displayName>
<description>SYSCFG user register 13</description>
<addressOffset>0x334</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SDRS</name>
<description>Secured DTCM RAM Size</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>D1SBRST</name>
<description>D1 Standby reset</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR14</name>
<displayName>UR14</displayName>
<description>SYSCFG user register 14</description>
<addressOffset>0x338</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>D1STPRST</name>
<description>D1 Stop Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR15</name>
<displayName>UR15</displayName>
<description>SYSCFG user register 15</description>
<addressOffset>0x33C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FZIWDGSTB</name>
<description>Freeze independent watchdog in Standby
mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR16</name>
<displayName>UR16</displayName>
<description>SYSCFG user register 16</description>
<addressOffset>0x340</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FZIWDGSTP</name>
<description>Freeze independent watchdog in Stop
mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PKP</name>
<description>Private key programmed</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UR17</name>
<displayName>UR17</displayName>
<description>SYSCFG user register 17</description>
<addressOffset>0x344</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IO_HSLV</name>
<description>I/O high speed / low
voltage</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EXTI</name>
<description>External interrupt/event
controller</description>
<groupName>EXTI</groupName>
<baseAddress>0x58000000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PVD_PVM</name>
<description>PVD through EXTI line</description>
<value>1</value>
</interrupt>
<interrupt>
<name>EXTI0</name>
<description>EXTI Line 0 interrupt</description>
<value>6</value>
</interrupt>
<interrupt>
<name>EXTI1</name>
<description>EXTI Line 1 interrupt</description>
<value>7</value>
</interrupt>
<interrupt>
<name>EXTI2</name>
<description>EXTI Line 2 interrupt</description>
<value>8</value>
</interrupt>
<interrupt>
<name>EXTI3</name>
<description>EXTI Line 3interrupt</description>
<value>9</value>
</interrupt>
<interrupt>
<name>EXTI4</name>
<description>EXTI Line 4interrupt</description>
<value>10</value>
</interrupt>
<interrupt>
<name>EXTI9_5</name>
<description>EXTI Line[9:5] interrupts</description>
<value>23</value>
</interrupt>
<interrupt>
<name>EXTI15_10</name>
<description>EXTI Line[15:10] interrupts</description>
<value>40</value>
</interrupt>
<interrupt>
<name>RTC_ALARM</name>
<description>RTC alarms (A and B)</description>
<value>41</value>
</interrupt>
<interrupt>
<name>FPU</name>
<description> CPU FPU interrupt</description>
<value>81</value>
</interrupt>
<registers>
<register>
<name>RTSR1</name>
<displayName>RTSR1</displayName>
<description>EXTI rising trigger selection
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TR0</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR1</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR2</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR3</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR4</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR5</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR6</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR7</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR8</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR9</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR10</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR11</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR12</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR13</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR14</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR15</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR16</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR17</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR18</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR19</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR20</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR21</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FTSR1</name>
<displayName>FTSR1</displayName>
<description>EXTI falling trigger selection
register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TR0</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR1</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR2</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR3</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR4</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR5</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR6</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR7</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR8</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR9</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR10</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR11</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR12</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR13</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR14</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR15</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR16</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR17</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR18</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR19</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR20</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR21</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWIER1</name>
<displayName>SWIER1</displayName>
<description>EXTI software interrupt event
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWIER0</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER1</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER2</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER3</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER4</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER5</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER6</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER7</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER8</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER9</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER10</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER11</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER12</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER13</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER14</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER15</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER16</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER17</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER18</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER19</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER20</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER21</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PMR1</name>
<displayName>D3PMR1</displayName>
<description>EXTI D3 pending mask register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR0</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR1</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR2</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR3</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR4</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR5</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR6</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR7</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR8</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR9</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR10</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR11</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR12</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR13</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR14</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR15</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR19</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR20</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR21</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR25</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PCR1L</name>
<displayName>D3PCR1L</displayName>
<description>EXTI D3 pending clear selection register
low</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCS0</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS1</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS2</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS3</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS4</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS5</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS6</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS7</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS8</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS9</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS10</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS11</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS12</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS13</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS14</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS15</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
(n/2)</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PCR1H</name>
<displayName>D3PCR1H</displayName>
<description>EXTI D3 pending clear selection register
high</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCS19</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+32)/2)</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS20</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+32)/2)</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS21</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+32)/2)</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS25</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+32)/2)</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTSR2</name>
<displayName>RTSR2</displayName>
<description>EXTI rising trigger selection
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TR49</name>
<description>Rising trigger event configuration bit
of Configurable Event input x+32</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR51</name>
<description>Rising trigger event configuration bit
of Configurable Event input x+32</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FTSR2</name>
<displayName>FTSR2</displayName>
<description>EXTI falling trigger selection
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TR49</name>
<description>Falling trigger event configuration bit
of Configurable Event input x+32</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR51</name>
<description>Falling trigger event configuration bit
of Configurable Event input x+32</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWIER2</name>
<displayName>SWIER2</displayName>
<description>EXTI software interrupt event
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWIER49</name>
<description>Software interrupt on line
x+32</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER51</name>
<description>Software interrupt on line
x+32</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PMR2</name>
<displayName>D3PMR2</displayName>
<description>EXTI D3 pending mask register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR34</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR35</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR41</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR48</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR49</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR50</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR51</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR52</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR53</name>
<description>D3 Pending Mask on Event input
x+32</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PCR2L</name>
<displayName>D3PCR2L</displayName>
<description>EXTI D3 pending clear selection register
low</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCS35</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+64)/2)</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS34</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+64)/2)</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS41</name>
<description>D3 Pending request clear input signal
selection on Event input x = truncate
((n+64)/2)</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PCR2H</name>
<displayName>D3PCR2H</displayName>
<description>EXTI D3 pending clear selection register
high</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCS48</name>
<description>Pending request clear input signal
selection on Event input x= truncate
((n+96)/2)</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS49</name>
<description>Pending request clear input signal
selection on Event input x= truncate
((n+96)/2)</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS50</name>
<description>Pending request clear input signal
selection on Event input x= truncate
((n+96)/2)</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS51</name>
<description>Pending request clear input signal
selection on Event input x= truncate
((n+96)/2)</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS52</name>
<description>Pending request clear input signal
selection on Event input x= truncate
((n+96)/2)</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCS53</name>
<description>Pending request clear input signal
selection on Event input x= truncate
((n+96)/2)</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTSR3</name>
<displayName>RTSR3</displayName>
<description>EXTI rising trigger selection
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TR82</name>
<description>Rising trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR84</name>
<description>Rising trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR85</name>
<description>Rising trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR86</name>
<description>Rising trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FTSR3</name>
<displayName>FTSR3</displayName>
<description>EXTI falling trigger selection
register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TR82</name>
<description>Falling trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR84</name>
<description>Falling trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR85</name>
<description>Falling trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TR86</name>
<description>Falling trigger event configuration bit
of Configurable Event input x+64</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWIER3</name>
<displayName>SWIER3</displayName>
<description>EXTI software interrupt event
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWIER82</name>
<description>Software interrupt on line
x+64</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER84</name>
<description>Software interrupt on line
x+64</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER85</name>
<description>Software interrupt on line
x+64</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWIER86</name>
<description>Software interrupt on line
x+64</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PMR3</name>
<displayName>D3PMR3</displayName>
<description>EXTI D3 pending mask register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR88</name>
<description>D3 Pending Mask on Event input
x+64</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>D3PCR3H</name>
<displayName>D3PCR3H</displayName>
<description>EXTI D3 pending clear selection register
high</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCS88</name>
<description>D3 Pending request clear input signal
selection on Event input x= truncate
N+160/2</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUIMR1</name>
<displayName>CPUIMR1</displayName>
<description>EXTI interrupt mask register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFC00000</resetValue>
<fields>
<field>
<name>MR0</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR1</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR2</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR3</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR4</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR5</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR6</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR7</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR8</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR9</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR10</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR11</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR12</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR13</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR14</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR15</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR16</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR17</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR18</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR19</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR20</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR21</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR22</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR23</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR24</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR25</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR26</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR27</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR28</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR29</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR30</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR31</name>
<description>Rising trigger event configuration bit
of Configurable Event input</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUEMR1</name>
<displayName>CPUEMR1</displayName>
<description>EXTI event mask register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR0</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR1</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR2</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR3</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR4</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR5</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR6</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR7</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR8</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR9</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR10</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR11</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR12</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR13</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR14</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR15</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR16</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR17</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR18</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR19</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR20</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR21</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR22</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR23</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR24</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR25</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR26</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR27</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR28</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR29</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR30</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR31</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUPR1</name>
<displayName>CPUPR1</displayName>
<description>EXTI pending register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PR0</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR1</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR2</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR3</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR4</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR5</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR6</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR7</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR8</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR9</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR10</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR11</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR12</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR13</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR14</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR15</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR16</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR17</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR18</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR19</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR20</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR21</name>
<description>CPU Event mask on Event input
x</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUIMR2</name>
<displayName>CPUIMR2</displayName>
<description>EXTI interrupt mask register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR0</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR1</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR2</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR3</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR4</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR5</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR6</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR7</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR8</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR9</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR10</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR11</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR12</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR14</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR15</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR16</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR17</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR18</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR19</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR20</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR21</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR22</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR23</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR24</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR25</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR26</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR27</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR28</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR29</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR30</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR31</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUEMR2</name>
<displayName>CPUEMR2</displayName>
<description>EXTI event mask register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR32</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR33</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR34</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR35</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR36</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR37</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR38</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR39</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR40</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR41</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR42</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR43</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR44</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR46</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR47</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR48</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR49</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR50</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR51</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR52</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR53</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR54</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR55</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR56</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR57</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR58</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR59</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR60</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR61</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR62</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR63</name>
<description>CPU Interrupt Mask on Direct Event input
x+32</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUPR2</name>
<displayName>CPUPR2</displayName>
<description>EXTI pending register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PR49</name>
<description>Configurable event inputs x+32 Pending
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR51</name>
<description>Configurable event inputs x+32 Pending
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUIMR3</name>
<displayName>CPUIMR3</displayName>
<description>EXTI interrupt mask register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR64</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR65</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR66</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR67</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR68</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR69</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR70</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR71</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR72</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR73</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR74</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR75</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR76</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR77</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR78</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR79</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR80</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR82</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR84</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR85</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR86</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR87</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR88</name>
<description>CPU Interrupt Mask on Direct Event input
x+64</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUEMR3</name>
<displayName>CPUEMR3</displayName>
<description>EXTI event mask register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MR64</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR65</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR66</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR67</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR68</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR69</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR70</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR71</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR72</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR73</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR74</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR75</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR76</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR77</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR78</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR79</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR80</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR82</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR84</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR85</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR86</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR87</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MR88</name>
<description>CPU Event mask on Event input
x+64</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUPR3</name>
<displayName>CPUPR3</displayName>
<description>EXTI pending register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PR82</name>
<description>Configurable event inputs x+64 Pending
bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR84</name>
<description>Configurable event inputs x+64 Pending
bit</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR85</name>
<description>Configurable event inputs x+64 Pending
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PR86</name>
<description>Configurable event inputs x+64 Pending
bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RAMECC1</name>
<description>ECC controller is associated to each RAM
area</description>
<groupName>RAMECC</groupName>
<baseAddress>0x52009000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>RAMECC interrupt enable
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GIE</name>
<description>Global interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCSEIE_</name>
<description>Global ECC single error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCDEIE</name>
<description>Global ECC double error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCDEBWIE</name>
<description>Global ECC double error on byte write
(BW) interrupt enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1CR</name>
<displayName>M1CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1SR</name>
<displayName>M1SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FAR</name>
<displayName>M1FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FDRL</name>
<displayName>M1FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FDRH</name>
<displayName>M1FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FECR</name>
<displayName>M1FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2CR</name>
<displayName>M2CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2SR</name>
<displayName>M2SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FAR</name>
<displayName>M2FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FDRL</name>
<displayName>M2FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FDRH</name>
<displayName>M2FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FECR</name>
<displayName>M2FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3CR</name>
<displayName>M3CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3SR</name>
<displayName>M3SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FAR</name>
<displayName>M3FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FDRL</name>
<displayName>M3FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FDRH</name>
<displayName>M3FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FECR</name>
<displayName>M3FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4CR</name>
<displayName>M4CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4SR</name>
<displayName>M4SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FAR</name>
<displayName>M4FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FDRL</name>
<displayName>M4FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FDRH</name>
<displayName>M4FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FECR</name>
<displayName>M4FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<alternateRegister>M4FDRH</alternateRegister>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5CR</name>
<displayName>M5CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5SR</name>
<displayName>M5SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FAR</name>
<displayName>M5FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FDRL</name>
<displayName>M5FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FDRH</name>
<displayName>M5FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FECR</name>
<displayName>M5FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RAMECC2</name>
<description>ECC controller is associated to each RAM
area</description>
<groupName>RAMECC</groupName>
<baseAddress>0x48023000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>RAMECC interrupt enable
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GIE</name>
<description>Global interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCSEIE_</name>
<description>Global ECC single error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCDEIE</name>
<description>Global ECC double error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCDEBWIE</name>
<description>Global ECC double error on byte write
(BW) interrupt enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1CR</name>
<displayName>M1CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2CR</name>
<displayName>M2CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3CR</name>
<displayName>M3CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4CR</name>
<displayName>M4CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5CR</name>
<displayName>M5CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1SR</name>
<displayName>M1SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2SR</name>
<displayName>M2SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3SR</name>
<displayName>M3SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4SR</name>
<displayName>M4SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5SR</name>
<displayName>M5SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FAR</name>
<displayName>M1FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FAR</name>
<displayName>M2FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FAR</name>
<displayName>M3FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FAR</name>
<displayName>M4FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FAR</name>
<displayName>M5FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FDRL</name>
<displayName>M1FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FDRL</name>
<displayName>M2FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FDRL</name>
<displayName>M3FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FDRL</name>
<displayName>M4FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FDRL</name>
<displayName>M5FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FDRH</name>
<displayName>M1FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FDRH</name>
<displayName>M2FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FDRH</name>
<displayName>M3FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FDRH</name>
<displayName>M4FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FDRH</name>
<displayName>M5FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FECR</name>
<displayName>M1FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FECR</name>
<displayName>M2FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M3FECR</name>
<displayName>M3FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M4FECR</name>
<displayName>M4FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<alternateRegister>M4FDRH</alternateRegister>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M5FECR</name>
<displayName>M5FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RAMECC3</name>
<description>ECC controller is associated to each RAM
area</description>
<groupName>RAMECC</groupName>
<baseAddress>0x58027000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>RAMECC interrupt enable
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GIE</name>
<description>Global interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCSEIE_</name>
<description>Global ECC single error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCDEIE</name>
<description>Global ECC double error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GECCDEBWIE</name>
<description>Global ECC double error on byte write
(BW) interrupt enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1CR</name>
<displayName>M1CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2CR</name>
<displayName>M2CR</displayName>
<description>RAMECC monitor x configuration
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ECCSEIE</name>
<description>ECC single error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEIE</name>
<description>ECC double error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDEBWIE</name>
<description>ECC double error on byte write (BW)
interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELEN</name>
<description>ECC error latching enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1SR</name>
<displayName>M1SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2SR</name>
<displayName>M2SR</displayName>
<description>RAMECC monitor x status
register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEDCF</name>
<description>ECC single error detected and corrected
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDF</name>
<description>ECC double error detected
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBWDF</name>
<description>ECC double error on byte write (BW)
detected flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FAR</name>
<displayName>M1FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FAR</name>
<displayName>M2FAR</displayName>
<description>RAMECC monitor x failing address
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FADD</name>
<description>ECC error failing address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FDRL</name>
<displayName>M1FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FDRL</name>
<displayName>M2FDRL</displayName>
<description>RAMECC monitor x failing data low
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAL</name>
<description>Failing data low</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FDRH</name>
<displayName>M1FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FDRH</name>
<displayName>M2FDRH</displayName>
<description>RAMECC monitor x failing data high
register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FDATAH</name>
<description>Failing data high (64-bit
memory)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M1FECR</name>
<displayName>M1FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>M2FECR</name>
<displayName>M2FECR</displayName>
<description>RAMECC monitor x failing ECC error code
register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Failing error code</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DELAY_Block_SDMMC1</name>
<description>DELAY_Block_SDMMC1</description>
<groupName>DLYB</groupName>
<baseAddress>0x52008000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x1000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>WKUP</name>
<description>WKUP1 to WKUP6 pins</description>
<value>149</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>DLYB control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DEN</name>
<description>Delay block enable bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEN</name>
<description>Sampler length enable bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGR</name>
<displayName>CFGR</displayName>
<description>DLYB configuration register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEL</name>
<description>Select the phase for the Output
clock</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>UNIT</name>
<description>Delay Defines the delay of a Unit delay
cell</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>LNG</name>
<description>Delay line length value</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>LNGF</name>
<description>Length valid flag</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="DELAY_Block_SDMMC1">
<name>DELAY_Block_QUADSPI</name>
<baseAddress>0x52006000</baseAddress>
</peripheral>
<peripheral derivedFrom="DELAY_Block_SDMMC1">
<name>DELAY_Block_SDMMC2</name>
<baseAddress>0x48022800</baseAddress>
</peripheral>
<peripheral>
<name>Flash</name>
<description>Flash</description>
<groupName>Flash</groupName>
<baseAddress>0x52002000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x1000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>FLASH</name>
<description>Flash memory</description>
<value>4</value>
</interrupt>
<registers>
<register>
<name>ACR</name>
<displayName>ACR</displayName>
<description>Access control register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000037</resetValue>
<fields>
<field>
<name>LATENCY</name>
<description>Read latency</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>WRHIGHFREQ</name>
<description>Flash signal delay</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>KEYR1</name>
<displayName>KEYR1</displayName>
<description>FLASH key register for bank 1</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY1R</name>
<description>Bank 1 access configuration unlock
key</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTKEYR</name>
<displayName>OPTKEYR</displayName>
<description>FLASH option key register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPTKEYR</name>
<description>Unlock key option bytes</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>FLASH control register for bank
1</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LOCK1</name>
<description>Bank 1 configuration lock
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PG1</name>
<description>Bank 1 program enable bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SER1</name>
<description>Bank 1 sector erase
request</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BER1</name>
<description>Bank 1 erase request</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSIZE1</name>
<description>Bank 1 program size</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FW1</name>
<description>Bank 1 write forcing control
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START1</name>
<description>Bank 1 bank or sector erase start
control bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNB1</name>
<description>Bank 1 sector erase selection
number</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CRC_EN</name>
<description>Bank 1 CRC control bit</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOPIE1</name>
<description>Bank 1 end-of-program interrupt control
bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPERRIE1</name>
<description>Bank 1 write protection error interrupt
enable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGSERRIE1</name>
<description>Bank 1 programming sequence error
interrupt enable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STRBERRIE1</name>
<description>Bank 1 strobe error interrupt enable
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INCERRIE1</name>
<description>Bank 1 inconsistency error interrupt
enable bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPERRIE1</name>
<description>Bank 1 write/erase error interrupt
enable bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDPERRIE1</name>
<description>Bank 1 read protection error interrupt
enable bit</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDSERRIE1</name>
<description>Bank 1 secure error interrupt enable
bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNECCERR1</name>
<description>Bank 1 ECC single correction error
interrupt enable bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBECCERRIE1</name>
<description>Bank 1 ECC double detection error
interrupt enable bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCENDIE1</name>
<description>Bank 1 end of CRC calculation interrupt
enable bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCRDERRIE1</name>
<description>Bank 1 CRC read error interrupt enable bit
When CRCRDERRIE1 bit is set to 1, an interrupt is generated when a protected area (PCROP or secure-only) has been detected during the last CRC computation on bank 1. CRCRDERRIE1 can be programmed only when LOCK1 is cleared to 0.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR1</name>
<displayName>SR1</displayName>
<description>FLASH status register for bank
1</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BSY1</name>
<description>Bank 1 ongoing program
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WBNE1</name>
<description>Bank 1 write buffer not empty
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QW1</name>
<description>Bank 1 wait queue flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_BUSY1</name>
<description>Bank 1 CRC busy flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOP1</name>
<description>Bank 1 end-of-program flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPERR1</name>
<description>Bank 1 write protection error
flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGSERR1</name>
<description>Bank 1 programming sequence error
flag</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STRBERR1</name>
<description>Bank 1 strobe error flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INCERR1</name>
<description>Bank 1 inconsistency error
flag</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPERR1</name>
<description>Bank 1 write/erase error
flag</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDPERR1</name>
<description>Bank 1 read protection error
flag</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDSERR1</name>
<description>Bank 1 secure error flag</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNECCERR</name>
<description>Bank 1 single correction error
flag</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBECCERR1</name>
<description>Bank 1 ECC double detection error
flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCEND1</name>
<description>Bank 1 CRC-complete flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCRDERR1</name>
<description>Bank 1 CRC read error flag
CRCRDERR1 flag is raised when a word is found read protected during a CRC operation on bank 1. An interrupt is generated if CRCRDIE1 and CRCEND1 are set to 1. Writing 1 to CLR_CRCRDERR1 bit in FLASH_CCR1 register clears CRCRDERR1.
Note: This flag is valid only when CRCEND1 bit is set to 1</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<displayName>CCR1</displayName>
<description>FLASH clear control register for bank
1</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLR_EOP1</name>
<description>Bank 1 EOP1 flag clear bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_WRPERR1</name>
<description>Bank 1 WRPERR1 flag clear
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_PGSERR1</name>
<description>Bank 1 PGSERR1 flag clear
bi</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_STRBERR1</name>
<description>Bank 1 STRBERR1 flag clear
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_INCERR1</name>
<description>Bank 1 INCERR1 flag clear
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_OPERR1</name>
<description>Bank 1 OPERR1 flag clear
bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_RDPERR1</name>
<description>Bank 1 RDPERR1 flag clear
bit</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_RDSERR1</name>
<description>Bank 1 RDSERR1 flag clear
bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_SNECCERR1</name>
<description>Bank 1 SNECCERR1 flag clear
bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_DBECCERR1</name>
<description>Bank 1 DBECCERR1 flag clear
bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_CRCEND1</name>
<description>Bank 1 CRCEND1 flag clear
bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_CRCRDERR1</name>
<description>Bank 1 CRCRDERR1 flag clear bit
Setting this bit to 1 resets to 0 CRCRDERR1 flag in FLASH_SR1 register.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OPTCR</name>
<displayName>OPTCR</displayName>
<description>FLASH option control register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPTLOCK</name>
<description>FLASH_OPTCR lock option configuration
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTSTART</name>
<description>Option byte start change option
configuration bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MER</name>
<description>Flash mass erase enable
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTCHANGEERRIE</name>
<description>Option byte change error interrupt
enable bit</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP_BANK</name>
<description>Bank swapping configuration
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTSR_CUR</name>
<displayName>OPTSR_CUR</displayName>
<description>FLASH option status register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPT_BUSY</name>
<description>Option byte change ongoing
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOR_LEV</name>
<description>Brownout level option status
bit</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IWDG1_SW</name>
<description>IWDG1 control option status
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRST_STOP_D1</name>
<description>D1 DStop entry reset option status
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRST_STBY_D1</name>
<description>D1 DStandby entry reset option status
bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDP</name>
<description>Readout protection level option status
byte</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>IWDG_FZ_STOP</name>
<description>IWDG Stop mode freeze option status
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWDG_FZ_SDBY</name>
<description>IWDG Standby mode freeze option status
bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ST_RAM_SIZE</name>
<description>DTCM RAM size option
status</description>
<bitOffset>19</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SECURITY</name>
<description>Security enable option status
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IO_HSLV</name>
<description>I/O high-speed at low-voltage status bit
(PRODUCT_BELOW_25V)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTCHANGEERR</name>
<description>Option byte change error
flag</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP_BANK_OPT</name>
<description>Bank swapping option status
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTSR_PRG</name>
<displayName>OPTSR_PRG</displayName>
<description>FLASH option status register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOR_LEV</name>
<description>BOR reset level option configuration
bits</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IWDG1_SW</name>
<description>IWDG1 option configuration
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRST_STOP_D1</name>
<description>Option byte erase after D1 DStop option
configuration bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRST_STBY_D1</name>
<description>Option byte erase after D1 DStandby
option configuration bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDP</name>
<description>Readout protection level option
configuration byte</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>IWDG_FZ_STOP</name>
<description>IWDG Stop mode freeze option
configuration bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWDG_FZ_SDBY</name>
<description>IWDG Standby mode freeze option
configuration bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ST_RAM_SIZE</name>
<description>DTCM size select option configuration
bits</description>
<bitOffset>19</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SECURITY</name>
<description>Security option configuration
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IO_HSLV</name>
<description>I/O high-speed at low-voltage
(PRODUCT_BELOW_25V)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP_BANK_OPT</name>
<description>Bank swapping option configuration
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTCCR</name>
<displayName>OPTCCR</displayName>
<description>FLASH option clear control
register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLR_OPTCHANGEERR</name>
<description>OPTCHANGEERR reset bit</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRAR_CUR1</name>
<displayName>PRAR_CUR1</displayName>
<description>FLASH protection address for bank
1</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROT_AREA_START1</name>
<description>Bank 1 lowest PCROP protected
address</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>PROT_AREA_END1</name>
<description>Bank 1 highest PCROP protected
address</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMEP1</name>
<description>Bank 1 PCROP protected erase enable
option status bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRAR_PRG1</name>
<displayName>PRAR_PRG1</displayName>
<description>FLASH protection address for bank
1</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROT_AREA_START1</name>
<description>Bank 1 lowest PCROP protected address
configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>PROT_AREA_END1</name>
<description>Bank 1 highest PCROP protected address
configuration</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMEP1</name>
<description>Bank 1 PCROP protected erase enable
option configuration bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCAR_CUR1</name>
<displayName>SCAR_CUR1</displayName>
<description>FLASH secure address for bank
1</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC_AREA_START1</name>
<description>Bank 1 lowest secure protected
address</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>SEC_AREA_END1</name>
<description>Bank 1 highest secure protected
address</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMES1</name>
<description>Bank 1 secure protected erase enable
option status bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCAR_PRG1</name>
<displayName>SCAR_PRG1</displayName>
<description>FLASH secure address for bank
1</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC_AREA_START1</name>
<description>Bank 1 lowest secure protected address
configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>SEC_AREA_END1</name>
<description>Bank 1 highest secure protected address
configuration</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMES1</name>
<description>Bank 1 secure protected erase enable
option configuration bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WPSN_CUR1R</name>
<displayName>WPSN_CUR1R</displayName>
<description>FLASH write sector protection for bank
1</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRPSn1</name>
<description>Bank 1 sector write protection option
status byte</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>WPSN_PRG1R</name>
<displayName>WPSN_PRG1R</displayName>
<description>FLASH write sector protection for bank
1</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRPSn1</name>
<description>Bank 1 sector write protection
configuration byte</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>BOOT_CURR</name>
<displayName>BOOT_CURR</displayName>
<description>FLASH register with boot
address</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOOT_ADD0</name>
<description>Boot address 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>BOOT_ADD1</name>
<description>Boot address 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BOOT_PRGR</name>
<displayName>BOOT_PRGR</displayName>
<description>FLASH register with boot
address</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOOT_ADD0</name>
<description>Boot address 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>BOOT_ADD1</name>
<description>Boot address 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCCR1</name>
<displayName>CRCCR1</displayName>
<description>FLASH CRC control register for bank
1</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_SECT</name>
<description>Bank 1 CRC sector number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>ALL_BANK</name>
<description>Bank 1 CRC select bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_BY_SECT</name>
<description>Bank 1 CRC sector mode select
bit</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADD_SECT</name>
<description>Bank 1 CRC sector select
bit</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLEAN_SECT</name>
<description>Bank 1 CRC sector list clear
bit</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START_CRC</name>
<description>Bank 1 CRC start bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLEAN_CRC</name>
<description>Bank 1 CRC clear bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_BURST</name>
<description>Bank 1 CRC burst size</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCSADD1R</name>
<displayName>CRCSADD1R</displayName>
<description>FLASH CRC start address register for bank
1</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_START_ADDR</name>
<description>CRC start address on bank 1</description>
<bitOffset>2</bitOffset>
<bitWidth>18</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CRCEADD1R</name>
<displayName>CRCEADD1R</displayName>
<description>FLASH CRC end address register for bank
1</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_END_ADDR</name>
<description>CRC end address on bank 1</description>
<bitOffset>2</bitOffset>
<bitWidth>18</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CRCDATAR</name>
<displayName>CRCDATAR</displayName>
<description>FLASH CRC data register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_DATA</name>
<description>CRC result</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ECC_FA1R</name>
<displayName>ECC_FA1R</displayName>
<description>FLASH ECC fail address for bank
1</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FAIL_ECC_ADDR1</name>
<description>Bank 1 ECC error address</description>
<bitOffset>0</bitOffset>
<bitWidth>15</bitWidth>
</field>
</fields>
</register>
<register>
<name>ACR_</name>
<displayName>ACR_</displayName>
<description>Access control register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000037</resetValue>
<fields>
<field>
<name>LATENCY</name>
<description>Read latency</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>WRHIGHFREQ</name>
<description>Flash signal delay</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>KEYR2</name>
<displayName>KEYR2</displayName>
<description>FLASH key register for bank 2</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEYR2</name>
<description>Bank 2 access configuration unlock
key</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTKEYR_</name>
<displayName>OPTKEYR_</displayName>
<description>FLASH option key register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPTKEYR</name>
<description>Unlock key option bytes</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>FLASH control register for bank
2</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000031</resetValue>
<fields>
<field>
<name>LOCK2</name>
<description>Bank 2 configuration lock
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PG2</name>
<description>Bank 2 program enable bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SER2</name>
<description>Bank 2 sector erase
request</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BER2</name>
<description>Bank 2 erase request</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSIZE2</name>
<description>Bank 2 program size</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FW2</name>
<description>Bank 2 write forcing control
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START2</name>
<description>Bank 2 bank or sector erase start
control bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNB2</name>
<description>Bank 2 sector erase selection
number</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SPSS2</name>
<description>Bank 2 special sector selection bit</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_EN</name>
<description>Bank 2 CRC control bit</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOPIE2</name>
<description>Bank 2 end-of-program interrupt control
bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPERRIE2</name>
<description>Bank 2 write protection error interrupt
enable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGSERRIE2</name>
<description>Bank 2 programming sequence error
interrupt enable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STRBERRIE2</name>
<description>Bank 2 strobe error interrupt enable
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INCERRIE2</name>
<description>Bank 2 inconsistency error interrupt
enable bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPERRIE2</name>
<description>Bank 2 write/erase error interrupt
enable bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDPERRIE2</name>
<description>Bank 2 read protection error interrupt
enable bit</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDSERRIE2</name>
<description>Bank 2 secure error interrupt enable
bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNECCERRIE2</name>
<description>Bank 2 ECC single correction error
interrupt enable bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBECCERRIE2</name>
<description>Bank 2 ECC double detection error
interrupt enable bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCENDIE2</name>
<description>Bank 2 end of CRC calculation interrupt
enable bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCRDERRIE2</name>
<description>Bank 2 CRC read error interrupt enable bit</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR2</name>
<displayName>SR2</displayName>
<description>FLASH status register for bank
2</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BSY2</name>
<description>Bank 2 ongoing program
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WBNE2</name>
<description>Bank 2 write buffer not empty
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QW2</name>
<description>Bank 2 wait queue flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_BUSY2</name>
<description>Bank 2 CRC busy flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOP2</name>
<description>Bank 2 end-of-program flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPERR2</name>
<description>Bank 2 write protection error
flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGSERR2</name>
<description>Bank 2 programming sequence error
flag</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STRBERR2</name>
<description>Bank 2 strobe error flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INCERR2</name>
<description>Bank 2 inconsistency error
flag</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPERR2</name>
<description>Bank 2 write/erase error
flag</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDPERR2</name>
<description>Bank 2 read protection error
flag</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDSERR2</name>
<description>Bank 2 secure error flag</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SNECCERR2</name>
<description>Bank 2 single correction error
flag</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBECCERR2</name>
<description>Bank 2 ECC double detection error
flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCEND2</name>
<description>Bank 2 CRC-complete flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<displayName>CCR2</displayName>
<description>FLASH clear control register for bank
2</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLR_EOP2</name>
<description>Bank 1 EOP1 flag clear bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_WRPERR2</name>
<description>Bank 2 WRPERR1 flag clear
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_PGSERR2</name>
<description>Bank 2 PGSERR1 flag clear
bi</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_STRBERR2</name>
<description>Bank 2 STRBERR1 flag clear
bit</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_INCERR2</name>
<description>Bank 2 INCERR1 flag clear
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_OPERR2</name>
<description>Bank 2 OPERR1 flag clear
bit</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_RDPERR2</name>
<description>Bank 2 RDPERR1 flag clear
bit</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_RDSERR1</name>
<description>Bank 1 RDSERR1 flag clear
bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_SNECCERR2</name>
<description>Bank 2 SNECCERR1 flag clear
bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_DBECCERR1</name>
<description>Bank 1 DBECCERR1 flag clear
bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLR_CRCEND2</name>
<description>Bank 2 CRCEND1 flag clear
bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTCR_</name>
<displayName>OPTCR_</displayName>
<description>FLASH option control register</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPTLOCK</name>
<description>FLASH_OPTCR lock option configuration
bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTSTART</name>
<description>Option byte start change option
configuration bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MER</name>
<description>Flash mass erase enable
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTCHANGEERRIE</name>
<description>Option byte change error interrupt
enable bit</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP_BANK</name>
<description>Bank swapping configuration
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTSR_CUR_</name>
<displayName>OPTSR_CUR_</displayName>
<description>FLASH option status register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPT_BUSY</name>
<description>Option byte change ongoing
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOR_LEV</name>
<description>Brownout level option status
bit</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IWDG1_SW</name>
<description>IWDG1 control option status
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRST_STOP_D1</name>
<description>D1 DStop entry reset option status
bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRST_STBY_D1</name>
<description>D1 DStandby entry reset option status
bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDP</name>
<description>Readout protection level option status
byte</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>IWDG_FZ_STOP</name>
<description>IWDG Stop mode freeze option status
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWDG_FZ_SDBY</name>
<description>IWDG Standby mode freeze option status
bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ST_RAM_SIZE</name>
<description>DTCM RAM size option
status</description>
<bitOffset>19</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SECURITY</name>
<description>Security enable option status
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IO_HSLV</name>
<description>I/O high-speed at low-voltage status bit
(PRODUCT_BELOW_25V)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTCHANGEERR</name>
<description>Option byte change error
flag</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP_BANK_OPT</name>
<description>Bank swapping option status
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTSR_PRG_</name>
<displayName>OPTSR_PRG_</displayName>
<description>FLASH option status register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOR_LEV</name>
<description>BOR reset level option configuration
bits</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IWDG1_SW</name>
<description>IWDG1 option configuration
bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>nRST_STOP</name>
<description>Option byte erase after D1 DStop option
configuration bit</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>nRST_STDY</name>
<description>Option byte erase after D1 DStandby
option configuration bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDP</name>
<description>Readout protection level option
configuration byte</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FZ_IWDG_STOP</name>
<description>IWDG Stop mode freeze option
configuration bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FZ_IWDG_SDBY</name>
<description>IWDG Standby mode freeze option
configuration bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ST_RAM_SIZE</name>
<description>DTCM size select option configuration
bits</description>
<bitOffset>19</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SECURITY</name>
<description>Security option configuration
bit</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IO_HSLV</name>
<description>I/O high-speed at low-voltage
(PRODUCT_BELOW_25V)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP_BANK_OPT</name>
<description>Bank swapping option configuration
bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPTCCR_</name>
<displayName>OPTCCR_</displayName>
<description>FLASH option clear control
register</description>
<addressOffset>0x124</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLR_OPTCHANGEERR</name>
<description>OPTCHANGEERR reset bit</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRAR_CUR2</name>
<displayName>PRAR_CUR2</displayName>
<description>FLASH protection address for bank
1</description>
<addressOffset>0x128</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROT_AREA_START2</name>
<description>Bank 2 lowest PCROP protected
address</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>PROT_AREA_END2</name>
<description>Bank 2 highest PCROP protected
address</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMEP2</name>
<description>Bank 2 PCROP protected erase enable
option status bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRAR_PRG2</name>
<displayName>PRAR_PRG2</displayName>
<description>FLASH protection address for bank
2</description>
<alternateRegister>PRAR_PRG1</alternateRegister>
<addressOffset>0x12C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROT_AREA_START2</name>
<description>Bank 2 lowest PCROP protected address
configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>PROT_AREA_END2</name>
<description>Bank 2 highest PCROP protected address
configuration</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMEP2</name>
<description>Bank 2 PCROP protected erase enable
option configuration bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCAR_CUR2</name>
<displayName>SCAR_CUR2</displayName>
<description>FLASH secure address for bank
2</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC_AREA_START2</name>
<description>Bank 2 lowest secure protected
address</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>SEC_AREA_END2</name>
<description>Bank 2 highest secure protected
address</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMES2</name>
<description>Bank 2 secure protected erase enable
option status bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCAR_PRG2</name>
<displayName>SCAR_PRG2</displayName>
<description>FLASH secure address for bank
2</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC_AREA_START2</name>
<description>Bank 2 lowest secure protected address
configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>SEC_AREA_END2</name>
<description>Bank 2 highest secure protected address
configuration</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>DMES2</name>
<description>Bank 2 secure protected erase enable
option configuration bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WPSN_CUR2R</name>
<displayName>WPSN_CUR2R</displayName>
<description>FLASH write sector protection for bank
2</description>
<addressOffset>0x138</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRPSn2</name>
<description>Bank 2 sector write protection option
status byte</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>WPSN_PRG2R</name>
<displayName>WPSN_PRG2R</displayName>
<description>FLASH write sector protection for bank
2</description>
<addressOffset>0x13C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRPSn2</name>
<description>Bank 2 sector write protection
configuration byte</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>BOOT_CURR_</name>
<displayName>BOOT_CURR_</displayName>
<description>FLASH register with boot
address</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOOT_ADD0</name>
<description>Boot address 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>BOOT_ADD1</name>
<description>Boot address 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BOOT_PRGR_</name>
<displayName>BOOT_PRGR_</displayName>
<description>FLASH register with boot
address</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOOT_ADD0</name>
<description>Boot address 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>BOOT_ADD1</name>
<description>Boot address 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCCR2</name>
<displayName>CRCCR2</displayName>
<description>FLASH CRC control register for bank
1</description>
<addressOffset>0x150</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_SECT</name>
<description>Bank 2 CRC sector number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>ALL_BANK</name>
<description>Bank 2 CRC select bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_BY_SECT</name>
<description>Bank 2 CRC sector mode select
bit</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADD_SECT</name>
<description>Bank 2 CRC sector select
bit</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLEAN_SECT</name>
<description>Bank 2 CRC sector list clear
bit</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START_CRC</name>
<description>Bank 2 CRC start bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLEAN_CRC</name>
<description>Bank 2 CRC clear bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC_BURST</name>
<description>Bank 2 CRC burst size</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCSADD2R</name>
<displayName>CRCSADD2R</displayName>
<description>FLASH CRC start address register for bank
2</description>
<addressOffset>0x154</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_START_ADDR</name>
<description>CRC start address on bank
2</description>
<bitOffset>2</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCEADD2R</name>
<displayName>CRCEADD2R</displayName>
<description>FLASH CRC end address register for bank
2</description>
<addressOffset>0x158</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_END_ADDR</name>
<description>CRC end address on bank 2</description>
<bitOffset>2</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCDATAR_</name>
<displayName>CRCDATAR_</displayName>
<description>FLASH CRC data register</description>
<addressOffset>0x15C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRC_DATA</name>
<description>CRC result</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ECC_FA2R</name>
<displayName>ECC_FA2R</displayName>
<description>FLASH ECC fail address for bank
2</description>
<addressOffset>0x160</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FAIL_ECC_ADDR2</name>
<description>Bank 2 ECC error address</description>
<bitOffset>0</bitOffset>
<bitWidth>15</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>AXI</name>
<description>AXI interconnect registers</description>
<groupName>AXI</groupName>
<baseAddress>0x51000000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x100000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>AXI_PERIPH_ID_4</name>
<displayName>AXI_PERIPH_ID_4</displayName>
<description>AXI interconnect - peripheral ID4
register</description>
<addressOffset>0x1FD0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>JEP106CON</name>
<description>JEP106 continuation code</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>KCOUNT4</name>
<description>Register file size</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_PERIPH_ID_0</name>
<displayName>AXI_PERIPH_ID_0</displayName>
<description>AXI interconnect - peripheral ID0
register</description>
<addressOffset>0x1FE0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>PARTNUM</name>
<description>Peripheral part number bits 0 to
7</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_PERIPH_ID_1</name>
<displayName>AXI_PERIPH_ID_1</displayName>
<description>AXI interconnect - peripheral ID1
register</description>
<addressOffset>0x1FE4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>PARTNUM</name>
<description>Peripheral part number bits 8 to
11</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>JEP106I</name>
<description>JEP106 identity bits 0 to
3</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_PERIPH_ID_2</name>
<displayName>AXI_PERIPH_ID_2</displayName>
<description>AXI interconnect - peripheral ID2
register</description>
<addressOffset>0x1FE8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>JEP106ID</name>
<description>JEP106 Identity bits 4 to
6</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JEDEC</name>
<description>JEP106 code flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REVISION</name>
<description>Peripheral revision number</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_PERIPH_ID_3</name>
<displayName>AXI_PERIPH_ID_3</displayName>
<description>AXI interconnect - peripheral ID3
register</description>
<addressOffset>0x1FEC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>CUST_MOD_NUM</name>
<description>Customer modification</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REV_AND</name>
<description>Customer version</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_COMP_ID_0</name>
<displayName>AXI_COMP_ID_0</displayName>
<description>AXI interconnect - component ID0
register</description>
<addressOffset>0x1FF0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>PREAMBLE</name>
<description>Preamble bits 0 to 7</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_COMP_ID_1</name>
<displayName>AXI_COMP_ID_1</displayName>
<description>AXI interconnect - component ID1
register</description>
<addressOffset>0x1FF4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>PREAMBLE</name>
<description>Preamble bits 8 to 11</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CLASS</name>
<description>Component class</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_COMP_ID_2</name>
<displayName>AXI_COMP_ID_2</displayName>
<description>AXI interconnect - component ID2
register</description>
<addressOffset>0x1FF8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>PREAMBLE</name>
<description>Preamble bits 12 to 19</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_COMP_ID_3</name>
<displayName>AXI_COMP_ID_3</displayName>
<description>AXI interconnect - component ID3
register</description>
<addressOffset>0x1FFC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>PREAMBLE</name>
<description>Preamble bits 20 to 27</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG1_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG1_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x2008</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG2_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG2_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x3008</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG3_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG3_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x4008</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG4_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG4_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x5008</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG5_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG5_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x6008</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG6_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG6_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x7008</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG7_FN_MOD_ISS_BM</name>
<displayName>AXI_TARG7_FN_MOD_ISS_BM</displayName>
<description>AXI interconnect - TARG x bus matrix issuing
functionality register</description>
<addressOffset>0x800C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>READ_ISS_OVERRIDE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Switch matrix write issuing override for
target</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG1_FN_MOD2</name>
<displayName>AXI_TARG1_FN_MOD2</displayName>
<description>AXI interconnect - TARG x bus matrix
functionality 2 register</description>
<addressOffset>0x2024</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>BYPASS_MERGE</name>
<description>Disable packing of beats to match the
output data width</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG2_FN_MOD2</name>
<displayName>AXI_TARG2_FN_MOD2</displayName>
<description>AXI interconnect - TARG x bus matrix
functionality 2 register</description>
<addressOffset>0x3024</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>BYPASS_MERGE</name>
<description>Disable packing of beats to match the
output data width</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG7_FN_MOD2</name>
<displayName>AXI_TARG7_FN_MOD2</displayName>
<description>AXI interconnect - TARG x bus matrix
functionality 2 register</description>
<addressOffset>0x8024</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>BYPASS_MERGE</name>
<description>Disable packing of beats to match the
output data width</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG1_FN_MOD_LB</name>
<displayName>AXI_TARG1_FN_MOD_LB</displayName>
<description>AXI interconnect - TARG x long burst
functionality modification</description>
<addressOffset>0x202C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>FN_MOD_LB</name>
<description>Controls burst breaking of long
bursts</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG2_FN_MOD_LB</name>
<displayName>AXI_TARG2_FN_MOD_LB</displayName>
<description>AXI interconnect - TARG x long burst
functionality modification</description>
<addressOffset>0x302C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>FN_MOD_LB</name>
<description>Controls burst breaking of long
bursts</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG1_FN_MOD</name>
<displayName>AXI_TARG1_FN_MOD</displayName>
<description>AXI interconnect - TARG x long burst
functionality modification</description>
<addressOffset>0x2108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override AMIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override AMIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG2_FN_MOD</name>
<displayName>AXI_TARG2_FN_MOD</displayName>
<description>AXI interconnect - TARG x long burst
functionality modification</description>
<addressOffset>0x3108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override AMIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override AMIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_TARG7_FN_MOD</name>
<displayName>AXI_TARG7_FN_MOD</displayName>
<description>AXI interconnect - TARG x long burst
functionality modification</description>
<addressOffset>0x8108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override AMIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override AMIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI1_FN_MOD2</name>
<displayName>AXI_INI1_FN_MOD2</displayName>
<description>AXI interconnect - INI x functionality
modification 2 register</description>
<addressOffset>0x42024</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>BYPASS_MERGE</name>
<description>Disables alteration of transactions by
the up-sizer unless required by the
protocol</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI3_FN_MOD2</name>
<displayName>AXI_INI3_FN_MOD2</displayName>
<description>AXI interconnect - INI x functionality
modification 2 register</description>
<addressOffset>0x44024</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>BYPASS_MERGE</name>
<description>Disables alteration of transactions by
the up-sizer unless required by the
protocol</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI1_FN_MOD_AHB</name>
<displayName>AXI_INI1_FN_MOD_AHB</displayName>
<description>AXI interconnect - INI x AHB functionality
modification register</description>
<addressOffset>0x42028</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>RD_INC_OVERRIDE</name>
<description>Converts all AHB-Lite write transactions
to a series of single beat AXI</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WR_INC_OVERRIDE</name>
<description>Converts all AHB-Lite read transactions
to a series of single beat AXI</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI3_FN_MOD_AHB</name>
<displayName>AXI_INI3_FN_MOD_AHB</displayName>
<description>AXI interconnect - INI x AHB functionality
modification register</description>
<addressOffset>0x44028</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>RD_INC_OVERRIDE</name>
<description>Converts all AHB-Lite write transactions
to a series of single beat AXI</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WR_INC_OVERRIDE</name>
<description>Converts all AHB-Lite read transactions
to a series of single beat AXI</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI1_READ_QOS</name>
<displayName>AXI_INI1_READ_QOS</displayName>
<description>AXI interconnect - INI x read QoS
register</description>
<addressOffset>0x42100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AR_QOS</name>
<description>Read channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI2_READ_QOS</name>
<displayName>AXI_INI2_READ_QOS</displayName>
<description>AXI interconnect - INI x read QoS
register</description>
<addressOffset>0x43100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AR_QOS</name>
<description>Read channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI3_READ_QOS</name>
<displayName>AXI_INI3_READ_QOS</displayName>
<description>AXI interconnect - INI x read QoS
register</description>
<addressOffset>0x44100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AR_QOS</name>
<description>Read channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI4_READ_QOS</name>
<displayName>AXI_INI4_READ_QOS</displayName>
<description>AXI interconnect - INI x read QoS
register</description>
<addressOffset>0x45100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AR_QOS</name>
<description>Read channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI5_READ_QOS</name>
<displayName>AXI_INI5_READ_QOS</displayName>
<description>AXI interconnect - INI x read QoS
register</description>
<addressOffset>0x46100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AR_QOS</name>
<description>Read channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI6_READ_QOS</name>
<displayName>AXI_INI6_READ_QOS</displayName>
<description>AXI interconnect - INI x read QoS
register</description>
<addressOffset>0x47100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AR_QOS</name>
<description>Read channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI1_WRITE_QOS</name>
<displayName>AXI_INI1_WRITE_QOS</displayName>
<description>AXI interconnect - INI x write QoS
register</description>
<addressOffset>0x42104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AW_QOS</name>
<description>Write channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI2_WRITE_QOS</name>
<displayName>AXI_INI2_WRITE_QOS</displayName>
<description>AXI interconnect - INI x write QoS
register</description>
<addressOffset>0x43104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AW_QOS</name>
<description>Write channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI3_WRITE_QOS</name>
<displayName>AXI_INI3_WRITE_QOS</displayName>
<description>AXI interconnect - INI x write QoS
register</description>
<addressOffset>0x44104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AW_QOS</name>
<description>Write channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI4_WRITE_QOS</name>
<displayName>AXI_INI4_WRITE_QOS</displayName>
<description>AXI interconnect - INI x write QoS
register</description>
<addressOffset>0x45104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AW_QOS</name>
<description>Write channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI5_WRITE_QOS</name>
<displayName>AXI_INI5_WRITE_QOS</displayName>
<description>AXI interconnect - INI x write QoS
register</description>
<addressOffset>0x46104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AW_QOS</name>
<description>Write channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI6_WRITE_QOS</name>
<displayName>AXI_INI6_WRITE_QOS</displayName>
<description>AXI interconnect - INI x write QoS
register</description>
<addressOffset>0x47104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>AW_QOS</name>
<description>Write channel QoS setting</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI1_FN_MOD</name>
<displayName>AXI_INI1_FN_MOD</displayName>
<description>AXI interconnect - INI x issuing
functionality modification register</description>
<addressOffset>0x42108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override ASIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override ASIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI2_FN_MOD</name>
<displayName>AXI_INI2_FN_MOD</displayName>
<description>AXI interconnect - INI x issuing
functionality modification register</description>
<addressOffset>0x43108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override ASIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override ASIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI3_FN_MOD</name>
<displayName>AXI_INI3_FN_MOD</displayName>
<description>AXI interconnect - INI x issuing
functionality modification register</description>
<addressOffset>0x44108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override ASIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override ASIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI4_FN_MOD</name>
<displayName>AXI_INI4_FN_MOD</displayName>
<description>AXI interconnect - INI x issuing
functionality modification register</description>
<addressOffset>0x45108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override ASIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override ASIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI5_FN_MOD</name>
<displayName>AXI_INI5_FN_MOD</displayName>
<description>AXI interconnect - INI x issuing
functionality modification register</description>
<addressOffset>0x46108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override ASIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override ASIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AXI_INI6_FN_MOD</name>
<displayName>AXI_INI6_FN_MOD</displayName>
<description>AXI interconnect - INI x issuing
functionality modification register</description>
<addressOffset>0x47108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000004</resetValue>
<fields>
<field>
<name>READ_ISS_OVERRIDE</name>
<description>Override ASIB read issuing
capability</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRITE_ISS_OVERRIDE</name>
<description>Override ASIB write issuing
capability</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DCMI</name>
<description>Digital camera interface</description>
<groupName>DCMI</groupName>
<baseAddress>0x48020000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DCMI</name>
<description>DCMI global interrupt</description>
<value>78</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>OELS</name>
<description>Odd/Even Line Select (Line Select
Start)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSM</name>
<description>Line Select mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OEBS</name>
<description>Odd/Even Byte Select (Byte Select
Start)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSM</name>
<description>Byte Select mode</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>DCMI enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EDM</name>
<description>Extended data mode</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FCRC</name>
<description>Frame capture rate control</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>VSPOL</name>
<description>Vertical synchronization
polarity</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSPOL</name>
<description>Horizontal synchronization
polarity</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCKPOL</name>
<description>Pixel clock polarity</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ESS</name>
<description>Embedded synchronization
select</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JPEG</name>
<description>JPEG format</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CROP</name>
<description>Crop feature</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CM</name>
<description>Capture mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTURE</name>
<description>Capture enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>FNE</name>
<description>FIFO not empty</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSYNC</name>
<description>VSYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSYNC</name>
<description>HSYNC</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RIS</name>
<displayName>RIS</displayName>
<description>raw interrupt status register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LINE_RIS</name>
<description>Line raw interrupt status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSYNC_RIS</name>
<description>VSYNC raw interrupt status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR_RIS</name>
<description>Synchronization error raw interrupt
status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR_RIS</name>
<description>Overrun raw interrupt
status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRAME_RIS</name>
<description>Capture complete raw interrupt
status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LINE_IE</name>
<description>Line interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSYNC_IE</name>
<description>VSYNC interrupt enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR_IE</name>
<description>Synchronization error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR_IE</name>
<description>Overrun interrupt enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRAME_IE</name>
<description>Capture complete interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MIS</name>
<displayName>MIS</displayName>
<description>masked interrupt status
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LINE_MIS</name>
<description>Line masked interrupt
status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSYNC_MIS</name>
<description>VSYNC masked interrupt
status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR_MIS</name>
<description>Synchronization error masked interrupt
status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR_MIS</name>
<description>Overrun masked interrupt
status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRAME_MIS</name>
<description>Capture complete masked interrupt
status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>interrupt clear register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LINE_ISC</name>
<description>line interrupt status
clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSYNC_ISC</name>
<description>Vertical synch interrupt status
clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR_ISC</name>
<description>Synchronization error interrupt status
clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR_ISC</name>
<description>Overrun interrupt status
clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRAME_ISC</name>
<description>Capture complete interrupt status
clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ESCR</name>
<displayName>ESCR</displayName>
<description>embedded synchronization code
register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>FEC</name>
<description>Frame end delimiter code</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LEC</name>
<description>Line end delimiter code</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LSC</name>
<description>Line start delimiter code</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FSC</name>
<description>Frame start delimiter code</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>ESUR</name>
<displayName>ESUR</displayName>
<description>embedded synchronization unmask
register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>FEU</name>
<description>Frame end delimiter unmask</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LEU</name>
<description>Line end delimiter unmask</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LSU</name>
<description>Line start delimiter
unmask</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FSU</name>
<description>Frame start delimiter
unmask</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CWSTRT</name>
<displayName>CWSTRT</displayName>
<description>crop window start</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>VST</name>
<description>Vertical start line count</description>
<bitOffset>16</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>HOFFCNT</name>
<description>Horizontal offset count</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>CWSIZE</name>
<displayName>CWSIZE</displayName>
<description>crop window size</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>VLINE</name>
<description>Vertical line count</description>
<bitOffset>16</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>CAPCNT</name>
<description>Capture count</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>DR</name>
<displayName>DR</displayName>
<description>data register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>Byte3</name>
<description>Data byte 3</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>Byte2</name>
<description>Data byte 2</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>Byte1</name>
<description>Data byte 1</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>Byte0</name>
<description>Data byte 0</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>OTG1_HS_GLOBAL</name>
<description>USB 1 on the go high speed</description>
<groupName>USB_OTG_HS</groupName>
<baseAddress>0x40040000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>OTG_HS_EP1_OUT</name>
<description>OTG_HS out global interrupt</description>
<value>74</value>
</interrupt>
<interrupt>
<name>OTG_HS_EP1_IN</name>
<description>OTG_HS in global interrupt</description>
<value>75</value>
</interrupt>
<interrupt>
<name>OTG_HS_WKUP</name>
<description>OTG_HS wakeup interrupt</description>
<value>76</value>
</interrupt>
<interrupt>
<name>OTG_HS</name>
<description>OTG_HS global interrupt</description>
<value>77</value>
</interrupt>
<registers>
<register>
<name>OTG_HS_GOTGCTL</name>
<displayName>OTG_HS_GOTGCTL</displayName>
<description>OTG_HS control and status
register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000800</resetValue>
<fields>
<field>
<name>SRQSCS</name>
<description>Session request success</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SRQ</name>
<description>Session request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VBVALOEN</name>
<description>VBUS valid override enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VBVALOVAL</name>
<description>VBUS valid override value</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AVALOEN</name>
<description>A-peripheral session valid override enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AVALOVAL</name>
<description>A-peripheral session valid override value</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BVALOEN</name>
<description>B-peripheral session valid override enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BVALOVAL</name>
<description>B-peripheral session valid override value</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HNGSCS</name>
<description>Host negotiation success</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>HNPRQ</name>
<description>HNP request</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HSHNPEN</name>
<description>Host set HNP enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DHNPEN</name>
<description>Device HNP enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EHEN</name>
<description>Embedded host enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CIDSTS</name>
<description>Connector ID status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DBCT</name>
<description>Long/short debounce time</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ASVLD</name>
<description>A-session valid</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BSVLD</name>
<description>B-session valid</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OTGVER</name>
<description>OTG version</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CURMOD</name>
<description>Current mode of operation</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GOTGINT</name>
<displayName>OTG_HS_GOTGINT</displayName>
<description>OTG_HS interrupt register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>SEDET</name>
<description>Session end detected</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRSSCHG</name>
<description>Session request success status
change</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HNSSCHG</name>
<description>Host negotiation success status
change</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HNGDET</name>
<description>Host negotiation detected</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADTOCHG</name>
<description>A-device timeout change</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBCDNE</name>
<description>Debounce done</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDCHNG</name>
<description>ID input pin changed</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GAHBCFG</name>
<displayName>OTG_HS_GAHBCFG</displayName>
<description>OTG_HS AHB configuration
register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>GINT</name>
<description>Global interrupt mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HBSTLEN</name>
<description>Burst length/type</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFELVL</name>
<description>TxFIFO empty level</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTXFELVL</name>
<description>Periodic TxFIFO empty
level</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GUSBCFG</name>
<displayName>OTG_HS_GUSBCFG</displayName>
<description>OTG_HS USB configuration
register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000A00</resetValue>
<fields>
<field>
<name>TOCAL</name>
<description>FS timeout calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PHYSEL</name>
<description>USB 2.0 high-speed ULPI PHY or USB 1.1
full-speed serial transceiver select</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SRPCAP</name>
<description>SRP-capable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HNPCAP</name>
<description>HNP-capable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRDT</name>
<description>USB turnaround time</description>
<bitOffset>10</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PHYLPCS</name>
<description>PHY Low-power clock select</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ULPIFSLS</name>
<description>ULPI FS/LS select</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ULPIAR</name>
<description>ULPI Auto-resume</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ULPICSM</name>
<description>ULPI Clock SuspendM</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ULPIEVBUSD</name>
<description>ULPI External VBUS Drive</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ULPIEVBUSI</name>
<description>ULPI external VBUS
indicator</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSDPS</name>
<description>TermSel DLine pulsing
selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCCI</name>
<description>Indicator complement</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTCI</name>
<description>Indicator pass through</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ULPIIPD</name>
<description>ULPI interface protect
disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FHMOD</name>
<description>Forced host mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FDMOD</name>
<description>Forced peripheral mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GRSTCTL</name>
<displayName>OTG_HS_GRSTCTL</displayName>
<description>OTG_HS reset register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x20000000</resetValue>
<fields>
<field>
<name>CSRST</name>
<description>Core soft reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HSRST</name>
<description>HCLK soft reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FCRST</name>
<description>Host frame counter reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXFFLSH</name>
<description>RxFIFO flush</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFFLSH</name>
<description>TxFIFO flush</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHBIDL</name>
<description>AHB master idle</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMAREQ</name>
<description>DMA request signal enabled for USB OTG
HS</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GINTSTS</name>
<displayName>OTG_HS_GINTSTS</displayName>
<description>OTG_HS core interrupt register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x04000020</resetValue>
<fields>
<field>
<name>CMOD</name>
<description>Current mode of operation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MMIS</name>
<description>Mode mismatch interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OTGINT</name>
<description>OTG interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOF</name>
<description>Start of frame</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXFLVL</name>
<description>RxFIFO nonempty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NPTXFE</name>
<description>Nonperiodic TxFIFO empty</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GINAKEFF</name>
<description>Global IN nonperiodic NAK
effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BOUTNAKEFF</name>
<description>Global OUT NAK effective</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ESUSP</name>
<description>Early suspend</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBSUSP</name>
<description>USB suspend</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBRST</name>
<description>USB reset</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENUMDNE</name>
<description>Enumeration done</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ISOODRP</name>
<description>Isochronous OUT packet dropped
interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EOPF</name>
<description>End of periodic frame
interrupt</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IEPINT</name>
<description>IN endpoint interrupt</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OEPINT</name>
<description>OUT endpoint interrupt</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>IISOIXFR</name>
<description>Incomplete isochronous IN
transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PXFR_INCOMPISOOUT</name>
<description>Incomplete periodic
transfer</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATAFSUSP</name>
<description>Data fetch suspended</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HPRTINT</name>
<description>Host port interrupt</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>HCINT</name>
<description>Host channels interrupt</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PTXFE</name>
<description>Periodic TxFIFO empty</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CIDSCHG</name>
<description>Connector ID status change</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DISCINT</name>
<description>Disconnect detected
interrupt</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRQINT</name>
<description>Session request/new session detected
interrupt</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WKUINT</name>
<description>Resume/remote wakeup detected
interrupt</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GINTMSK</name>
<displayName>OTG_HS_GINTMSK</displayName>
<description>OTG_HS interrupt mask register</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MMISM</name>
<description>Mode mismatch interrupt
mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OTGINT</name>
<description>OTG interrupt mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOFM</name>
<description>Start of frame mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXFLVLM</name>
<description>Receive FIFO nonempty mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NPTXFEM</name>
<description>Nonperiodic TxFIFO empty
mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GINAKEFFM</name>
<description>Global nonperiodic IN NAK effective
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GONAKEFFM</name>
<description>Global OUT NAK effective
mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ESUSPM</name>
<description>Early suspend mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBSUSPM</name>
<description>USB suspend mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBRST</name>
<description>USB reset mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENUMDNEM</name>
<description>Enumeration done mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ISOODRPM</name>
<description>Isochronous OUT packet dropped interrupt
mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EOPFM</name>
<description>End of periodic frame interrupt
mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IEPINT</name>
<description>IN endpoints interrupt
mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OEPINT</name>
<description>OUT endpoints interrupt
mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IISOIXFRM</name>
<description>Incomplete isochronous IN transfer
mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PXFRM_IISOOXFRM</name>
<description>Incomplete periodic transfer
mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSUSPM</name>
<description>Data fetch suspended mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRTIM</name>
<description>Host port interrupt mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>HCIM</name>
<description>Host channels interrupt
mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTXFEM</name>
<description>Periodic TxFIFO empty mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CIDSCHGM</name>
<description>Connector ID status change
mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DISCINT</name>
<description>Disconnect detected interrupt
mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRQIM</name>
<description>Session request/new session detected
interrupt mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WUIM</name>
<description>Resume/remote wakeup detected interrupt
mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RSTDE</name>
<description>Reset detected interrupt
mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPMINTM</name>
<description>LPM interrupt mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GRXSTSR_Host</name>
<displayName>OTG_HS_GRXSTSR_Host</displayName>
<description>OTG_HS Receive status debug read register
(host mode)</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>CHNUM</name>
<description>Channel number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BCNT</name>
<description>Byte count</description>
<bitOffset>4</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PKTSTS</name>
<description>Packet status</description>
<bitOffset>17</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GRXSTSP_Host</name>
<displayName>OTG_HS_GRXSTSP_Host</displayName>
<description>OTG_HS status read and pop register (host
mode)</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>CHNUM</name>
<description>Channel number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BCNT</name>
<description>Byte count</description>
<bitOffset>4</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PKTSTS</name>
<description>Packet status</description>
<bitOffset>17</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GRXFSIZ</name>
<displayName>OTG_HS_GRXFSIZ</displayName>
<description>OTG_HS Receive FIFO size
register</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>RXFD</name>
<description>RxFIFO depth</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HNPTXFSIZ_Host</name>
<displayName>OTG_HS_HNPTXFSIZ_Host</displayName>
<description>OTG_HS nonperiodic transmit FIFO size
register (host mode)</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>NPTXFSA</name>
<description>Nonperiodic transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>NPTXFD</name>
<description>Nonperiodic TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF0_Device</name>
<displayName>OTG_HS_DIEPTXF0_Device</displayName>
<description>Endpoint 0 transmit FIFO size (peripheral
mode)</description>
<alternateRegister>OTG_HS_HNPTXFSIZ_Host</alternateRegister>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>TX0FSA</name>
<description>Endpoint 0 transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>TX0FD</name>
<description>Endpoint 0 TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GNPTXSTS</name>
<displayName>OTG_HS_GNPTXSTS</displayName>
<description>OTG_HS nonperiodic transmit FIFO/queue
status register</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00080200</resetValue>
<fields>
<field>
<name>NPTXFSAV</name>
<description>Nonperiodic TxFIFO space
available</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>NPTQXSAV</name>
<description>Nonperiodic transmit request queue space
available</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>NPTXQTOP</name>
<description>Top of the nonperiodic transmit request
queue</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GCCFG</name>
<displayName>OTG_HS_GCCFG</displayName>
<description>OTG_HS general core configuration
register</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PWRDWN</name>
<description>Power down</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BCDEN</name>
<description>Battery charging detector (BCD)
enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCDEN</name>
<description>Data contact detection (DCD) mode
enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PDEN</name>
<description>Primary detection (PD) mode
enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDEN</name>
<description>Secondary detection (SD) mode
enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VBDEN</name>
<description>USB VBUS detection enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCDET</name>
<description>Data contact detection (DCD)
status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PDET</name>
<description>Primary detection (PD)
status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDET</name>
<description>Secondary detection (SD)
status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PS2DET</name>
<description>DM pull-up detection
status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_CID</name>
<displayName>OTG_HS_CID</displayName>
<description>OTG_HS core ID register</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00001200</resetValue>
<fields>
<field>
<name>PRODUCT_ID</name>
<description>Product ID field</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HPTXFSIZ</name>
<displayName>OTG_HS_HPTXFSIZ</displayName>
<description>OTG_HS Host periodic transmit FIFO size
register</description>
<addressOffset>0x100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000600</resetValue>
<fields>
<field>
<name>PTXSA</name>
<description>Host periodic TxFIFO start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>PTXFD</name>
<description>Host periodic TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF1</name>
<displayName>OTG_HS_DIEPTXF1</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000400</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF2</name>
<displayName>OTG_HS_DIEPTXF2</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000600</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF3</name>
<displayName>OTG_HS_DIEPTXF3</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x10C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000800</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF4</name>
<displayName>OTG_HS_DIEPTXF4</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000A00</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF5</name>
<displayName>OTG_HS_DIEPTXF5</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000C00</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF6</name>
<displayName>OTG_HS_DIEPTXF6</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02000E00</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTXF7</name>
<displayName>OTG_HS_DIEPTXF7</displayName>
<description>OTG_HS device IN endpoint transmit FIFO size
register</description>
<addressOffset>0x11C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02001000</resetValue>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start
address</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint TxFIFO depth</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_DIEPTXF8</name>
<displayName>OTG_DIEPTXF8</displayName>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<resetValue>0x02001200</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
<name>INEPTXSA</name>
<description>IN endpoint FIFOx transmit RAM start address
This field contains the memory start address for IN endpoint transmit FIFOx. The address must be aligned with a 32-bit memory location.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPTXFD</name>
<description>IN endpoint Tx FIFO depth
This value is in terms of 32-bit words.
Minimum value is 16</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GRXSTSR_Device</name>
<displayName>OTG_HS_GRXSTSR_Device</displayName>
<description>OTG_HS Receive status debug read register
(peripheral mode mode)</description>
<alternateRegister>OTG_HS_GRXSTSR_Host</alternateRegister>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BCNT</name>
<description>Byte count</description>
<bitOffset>4</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PKTSTS</name>
<description>Packet status</description>
<bitOffset>17</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FRMNUM</name>
<description>Frame number</description>
<bitOffset>21</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GRXSTSP_Device</name>
<displayName>OTG_HS_GRXSTSP_Device</displayName>
<description>OTG_HS status read and pop register
(peripheral mode)</description>
<alternateRegister>OTG_HS_GRXSTSP_Host</alternateRegister>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BCNT</name>
<description>Byte count</description>
<bitOffset>4</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PKTSTS</name>
<description>Packet status</description>
<bitOffset>17</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FRMNUM</name>
<description>Frame number</description>
<bitOffset>21</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_GLPMCFG</name>
<displayName>OTG_HS_GLPMCFG</displayName>
<description>OTG core LPM configuration
register</description>
<addressOffset>0x54</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>LPMEN</name>
<description>LPM support enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPMACK</name>
<description>LPM token acknowledge
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BESL</name>
<description>Best effort service
latency</description>
<bitOffset>2</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>REMWAKE</name>
<description>bRemoteWake value</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>L1SSEN</name>
<description>L1 Shallow Sleep enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BESLTHRS</name>
<description>BESL threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>L1DSEN</name>
<description>L1 deep sleep enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPMRST</name>
<description>LPM response</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SLPSTS</name>
<description>Port sleep status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>L1RSMOK</name>
<description>Sleep State Resume OK</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LPMCHIDX</name>
<description>LPM Channel Index</description>
<bitOffset>17</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPMRCNT</name>
<description>LPM retry count</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNDLPM</name>
<description>Send LPM transaction</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPMRCNTSTS</name>
<description>LPM retry count status</description>
<bitOffset>25</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENBESL</name>
<description>Enable best effort service
latency</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="OTG1_HS_GLOBAL">
<name>OTG2_HS_GLOBAL</name>
<baseAddress>0x40080000</baseAddress>
<interrupt>
<name>OTG_FS_EP1_OUT</name>
<description>OTG_FS out global interrupt</description>
<value>98</value>
</interrupt>
<interrupt>
<name>OTG_FS_EP1_IN</name>
<description>OTG_FS in global interrupt</description>
<value>99</value>
</interrupt>
<interrupt>
<name>OTG_FS_WKUP</name>
<description>OTG_FS wakeup</description>
<value>100</value>
</interrupt>
</peripheral>
<peripheral>
<name>OTG1_HS_HOST</name>
<description>USB 1 on the go high speed</description>
<groupName>USB_OTG_HS</groupName>
<baseAddress>0x40040400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>OTG_FS</name>
<description>OTG_FS global interrupt</description>
<value>101</value>
</interrupt>
<registers>
<register>
<name>OTG_HS_HCFG</name>
<displayName>OTG_HS_HCFG</displayName>
<description>OTG_HS host configuration
register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>FSLSPCS</name>
<description>FS/LS PHY clock select</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLSS</name>
<description>FS- and LS-only support</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HFIR</name>
<displayName>OTG_HS_HFIR</displayName>
<description>OTG_HS Host frame interval
register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0000EA60</resetValue>
<fields>
<field>
<name>FRIVL</name>
<description>Frame interval</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HFNUM</name>
<displayName>OTG_HS_HFNUM</displayName>
<description>OTG_HS host frame number/frame time
remaining register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00003FFF</resetValue>
<fields>
<field>
<name>FRNUM</name>
<description>Frame number</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>FTREM</name>
<description>Frame time remaining</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HPTXSTS</name>
<displayName>OTG_HS_HPTXSTS</displayName>
<description>OTG_HS_Host periodic transmit FIFO/queue
status register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00080100</resetValue>
<fields>
<field>
<name>PTXFSAVL</name>
<description>Periodic transmit data FIFO space
available</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTXQSAV</name>
<description>Periodic transmit request queue space
available</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PTXQTOP</name>
<description>Top of the periodic transmit request
queue</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HAINT</name>
<displayName>OTG_HS_HAINT</displayName>
<description>OTG_HS Host all channels interrupt
register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>HAINT</name>
<description>Channel interrupts</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HAINTMSK</name>
<displayName>OTG_HS_HAINTMSK</displayName>
<description>OTG_HS host all channels interrupt mask
register</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>HAINTM</name>
<description>Channel interrupt mask</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HPRT</name>
<displayName>OTG_HS_HPRT</displayName>
<description>OTG_HS host port control and status
register</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PCSTS</name>
<description>Port connect status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCDET</name>
<description>Port connect detected</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PENA</name>
<description>Port enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PENCHNG</name>
<description>Port enable/disable change</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>POCA</name>
<description>Port overcurrent active</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>POCCHNG</name>
<description>Port overcurrent change</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRES</name>
<description>Port resume</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PSUSP</name>
<description>Port suspend</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRST</name>
<description>Port reset</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLSTS</name>
<description>Port line status</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PPWR</name>
<description>Port power</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTCTL</name>
<description>Port test control</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PSPD</name>
<description>Port speed</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR0</name>
<displayName>OTG_HS_HCCHAR0</displayName>
<description>OTG_HS host channel-0 characteristics
register</description>
<addressOffset>0x100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR1</name>
<displayName>OTG_HS_HCCHAR1</displayName>
<description>OTG_HS host channel-1 characteristics
register</description>
<addressOffset>0x120</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR2</name>
<displayName>OTG_HS_HCCHAR2</displayName>
<description>OTG_HS host channel-2 characteristics
register</description>
<addressOffset>0x140</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR3</name>
<displayName>OTG_HS_HCCHAR3</displayName>
<description>OTG_HS host channel-3 characteristics
register</description>
<addressOffset>0x160</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR4</name>
<displayName>OTG_HS_HCCHAR4</displayName>
<description>OTG_HS host channel-4 characteristics
register</description>
<addressOffset>0x180</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR5</name>
<displayName>OTG_HS_HCCHAR5</displayName>
<description>OTG_HS host channel-5 characteristics
register</description>
<addressOffset>0x1A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR6</name>
<displayName>OTG_HS_HCCHAR6</displayName>
<description>OTG_HS host channel-6 characteristics
register</description>
<addressOffset>0x1C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR7</name>
<displayName>OTG_HS_HCCHAR7</displayName>
<description>OTG_HS host channel-7 characteristics
register</description>
<addressOffset>0x1E0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR8</name>
<displayName>OTG_HS_HCCHAR8</displayName>
<description>OTG_HS host channel-8 characteristics
register</description>
<addressOffset>0x200</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR9</name>
<displayName>OTG_HS_HCCHAR9</displayName>
<description>OTG_HS host channel-9 characteristics
register</description>
<addressOffset>0x220</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR10</name>
<displayName>OTG_HS_HCCHAR10</displayName>
<description>OTG_HS host channel-10 characteristics
register</description>
<addressOffset>0x240</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR11</name>
<displayName>OTG_HS_HCCHAR11</displayName>
<description>OTG_HS host channel-11 characteristics
register</description>
<addressOffset>0x260</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT0</name>
<displayName>OTG_HS_HCSPLT0</displayName>
<description>OTG_HS host channel-0 split control
register</description>
<addressOffset>0x104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT1</name>
<displayName>OTG_HS_HCSPLT1</displayName>
<description>OTG_HS host channel-1 split control
register</description>
<addressOffset>0x124</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT2</name>
<displayName>OTG_HS_HCSPLT2</displayName>
<description>OTG_HS host channel-2 split control
register</description>
<addressOffset>0x144</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT3</name>
<displayName>OTG_HS_HCSPLT3</displayName>
<description>OTG_HS host channel-3 split control
register</description>
<addressOffset>0x164</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT4</name>
<displayName>OTG_HS_HCSPLT4</displayName>
<description>OTG_HS host channel-4 split control
register</description>
<addressOffset>0x184</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT5</name>
<displayName>OTG_HS_HCSPLT5</displayName>
<description>OTG_HS host channel-5 split control
register</description>
<addressOffset>0x1A4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT6</name>
<displayName>OTG_HS_HCSPLT6</displayName>
<description>OTG_HS host channel-6 split control
register</description>
<addressOffset>0x1C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT7</name>
<displayName>OTG_HS_HCSPLT7</displayName>
<description>OTG_HS host channel-7 split control
register</description>
<addressOffset>0x1E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT8</name>
<displayName>OTG_HS_HCSPLT8</displayName>
<description>OTG_HS host channel-8 split control
register</description>
<addressOffset>0x204</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT9</name>
<displayName>OTG_HS_HCSPLT9</displayName>
<description>OTG_HS host channel-9 split control
register</description>
<addressOffset>0x224</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT10</name>
<displayName>OTG_HS_HCSPLT10</displayName>
<description>OTG_HS host channel-10 split control
register</description>
<addressOffset>0x244</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT11</name>
<displayName>OTG_HS_HCSPLT11</displayName>
<description>OTG_HS host channel-11 split control
register</description>
<addressOffset>0x264</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT0</name>
<displayName>OTG_HS_HCINT0</displayName>
<description>OTG_HS host channel-11 interrupt
register</description>
<addressOffset>0x108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT1</name>
<displayName>OTG_HS_HCINT1</displayName>
<description>OTG_HS host channel-1 interrupt
register</description>
<addressOffset>0x128</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT2</name>
<displayName>OTG_HS_HCINT2</displayName>
<description>OTG_HS host channel-2 interrupt
register</description>
<addressOffset>0x148</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT3</name>
<displayName>OTG_HS_HCINT3</displayName>
<description>OTG_HS host channel-3 interrupt
register</description>
<addressOffset>0x168</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT4</name>
<displayName>OTG_HS_HCINT4</displayName>
<description>OTG_HS host channel-4 interrupt
register</description>
<addressOffset>0x188</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT5</name>
<displayName>OTG_HS_HCINT5</displayName>
<description>OTG_HS host channel-5 interrupt
register</description>
<addressOffset>0x1A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT6</name>
<displayName>OTG_HS_HCINT6</displayName>
<description>OTG_HS host channel-6 interrupt
register</description>
<addressOffset>0x1C8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT7</name>
<displayName>OTG_HS_HCINT7</displayName>
<description>OTG_HS host channel-7 interrupt
register</description>
<addressOffset>0x1E8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT8</name>
<displayName>OTG_HS_HCINT8</displayName>
<description>OTG_HS host channel-8 interrupt
register</description>
<addressOffset>0x208</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT9</name>
<displayName>OTG_HS_HCINT9</displayName>
<description>OTG_HS host channel-9 interrupt
register</description>
<addressOffset>0x228</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT10</name>
<displayName>OTG_HS_HCINT10</displayName>
<description>OTG_HS host channel-10 interrupt
register</description>
<addressOffset>0x248</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT11</name>
<displayName>OTG_HS_HCINT11</displayName>
<description>OTG_HS host channel-11 interrupt
register</description>
<addressOffset>0x268</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK0</name>
<displayName>OTG_HS_HCINTMSK0</displayName>
<description>OTG_HS host channel-11 interrupt mask
register</description>
<addressOffset>0x10C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK1</name>
<displayName>OTG_HS_HCINTMSK1</displayName>
<description>OTG_HS host channel-1 interrupt mask
register</description>
<addressOffset>0x12C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK2</name>
<displayName>OTG_HS_HCINTMSK2</displayName>
<description>OTG_HS host channel-2 interrupt mask
register</description>
<addressOffset>0x14C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK3</name>
<displayName>OTG_HS_HCINTMSK3</displayName>
<description>OTG_HS host channel-3 interrupt mask
register</description>
<addressOffset>0x16C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK4</name>
<displayName>OTG_HS_HCINTMSK4</displayName>
<description>OTG_HS host channel-4 interrupt mask
register</description>
<addressOffset>0x18C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK5</name>
<displayName>OTG_HS_HCINTMSK5</displayName>
<description>OTG_HS host channel-5 interrupt mask
register</description>
<addressOffset>0x1AC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK6</name>
<displayName>OTG_HS_HCINTMSK6</displayName>
<description>OTG_HS host channel-6 interrupt mask
register</description>
<addressOffset>0x1CC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK7</name>
<displayName>OTG_HS_HCINTMSK7</displayName>
<description>OTG_HS host channel-7 interrupt mask
register</description>
<addressOffset>0x1EC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK8</name>
<displayName>OTG_HS_HCINTMSK8</displayName>
<description>OTG_HS host channel-8 interrupt mask
register</description>
<addressOffset>0x20C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK9</name>
<displayName>OTG_HS_HCINTMSK9</displayName>
<description>OTG_HS host channel-9 interrupt mask
register</description>
<addressOffset>0x22C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK10</name>
<displayName>OTG_HS_HCINTMSK10</displayName>
<description>OTG_HS host channel-10 interrupt mask
register</description>
<addressOffset>0x24C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK11</name>
<displayName>OTG_HS_HCINTMSK11</displayName>
<description>OTG_HS host channel-11 interrupt mask
register</description>
<addressOffset>0x26C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>response received interrupt
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ0</name>
<displayName>OTG_HS_HCTSIZ0</displayName>
<description>OTG_HS host channel-11 transfer size
register</description>
<addressOffset>0x110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ1</name>
<displayName>OTG_HS_HCTSIZ1</displayName>
<description>OTG_HS host channel-1 transfer size
register</description>
<addressOffset>0x130</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ2</name>
<displayName>OTG_HS_HCTSIZ2</displayName>
<description>OTG_HS host channel-2 transfer size
register</description>
<addressOffset>0x150</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ3</name>
<displayName>OTG_HS_HCTSIZ3</displayName>
<description>OTG_HS host channel-3 transfer size
register</description>
<addressOffset>0x170</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ4</name>
<displayName>OTG_HS_HCTSIZ4</displayName>
<description>OTG_HS host channel-4 transfer size
register</description>
<addressOffset>0x190</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ5</name>
<displayName>OTG_HS_HCTSIZ5</displayName>
<description>OTG_HS host channel-5 transfer size
register</description>
<addressOffset>0x1B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ6</name>
<displayName>OTG_HS_HCTSIZ6</displayName>
<description>OTG_HS host channel-6 transfer size
register</description>
<addressOffset>0x1D0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ7</name>
<displayName>OTG_HS_HCTSIZ7</displayName>
<description>OTG_HS host channel-7 transfer size
register</description>
<addressOffset>0x1F0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ8</name>
<displayName>OTG_HS_HCTSIZ8</displayName>
<description>OTG_HS host channel-8 transfer size
register</description>
<addressOffset>0x210</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ9</name>
<displayName>OTG_HS_HCTSIZ9</displayName>
<description>OTG_HS host channel-9 transfer size
register</description>
<addressOffset>0x230</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ10</name>
<displayName>OTG_HS_HCTSIZ10</displayName>
<description>OTG_HS host channel-10 transfer size
register</description>
<addressOffset>0x250</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ11</name>
<displayName>OTG_HS_HCTSIZ11</displayName>
<description>OTG_HS host channel-11 transfer size
register</description>
<addressOffset>0x270</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA0</name>
<displayName>OTG_HS_HCDMA0</displayName>
<description>OTG_HS host channel-0 DMA address
register</description>
<addressOffset>0x114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA1</name>
<displayName>OTG_HS_HCDMA1</displayName>
<description>OTG_HS host channel-1 DMA address
register</description>
<addressOffset>0x134</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA2</name>
<displayName>OTG_HS_HCDMA2</displayName>
<description>OTG_HS host channel-2 DMA address
register</description>
<addressOffset>0x154</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA3</name>
<displayName>OTG_HS_HCDMA3</displayName>
<description>OTG_HS host channel-3 DMA address
register</description>
<addressOffset>0x174</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA4</name>
<displayName>OTG_HS_HCDMA4</displayName>
<description>OTG_HS host channel-4 DMA address
register</description>
<addressOffset>0x194</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA5</name>
<displayName>OTG_HS_HCDMA5</displayName>
<description>OTG_HS host channel-5 DMA address
register</description>
<addressOffset>0x1B4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA6</name>
<displayName>OTG_HS_HCDMA6</displayName>
<description>OTG_HS host channel-6 DMA address
register</description>
<addressOffset>0x1D4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA7</name>
<displayName>OTG_HS_HCDMA7</displayName>
<description>OTG_HS host channel-7 DMA address
register</description>
<addressOffset>0x1F4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA8</name>
<displayName>OTG_HS_HCDMA8</displayName>
<description>OTG_HS host channel-8 DMA address
register</description>
<addressOffset>0x214</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA9</name>
<displayName>OTG_HS_HCDMA9</displayName>
<description>OTG_HS host channel-9 DMA address
register</description>
<addressOffset>0x234</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA10</name>
<displayName>OTG_HS_HCDMA10</displayName>
<description>OTG_HS host channel-10 DMA address
register</description>
<addressOffset>0x254</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA11</name>
<displayName>OTG_HS_HCDMA11</displayName>
<description>OTG_HS host channel-11 DMA address
register</description>
<addressOffset>0x274</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR12</name>
<displayName>OTG_HS_HCCHAR12</displayName>
<description>OTG_HS host channel-12 characteristics
register</description>
<addressOffset>0x278</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT12</name>
<displayName>OTG_HS_HCSPLT12</displayName>
<description>OTG_HS host channel-12 split control
register</description>
<addressOffset>0x27C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT12</name>
<displayName>OTG_HS_HCINT12</displayName>
<description>OTG_HS host channel-12 interrupt
register</description>
<addressOffset>0x280</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK12</name>
<displayName>OTG_HS_HCINTMSK12</displayName>
<description>OTG_HS host channel-12 interrupt mask
register</description>
<addressOffset>0x284</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ12</name>
<displayName>OTG_HS_HCTSIZ12</displayName>
<description>OTG_HS host channel-12 transfer size
register</description>
<addressOffset>0x288</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA12</name>
<displayName>OTG_HS_HCDMA12</displayName>
<description>OTG_HS host channel-12 DMA address
register</description>
<addressOffset>0x28C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR13</name>
<displayName>OTG_HS_HCCHAR13</displayName>
<description>OTG_HS host channel-13 characteristics
register</description>
<addressOffset>0x290</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT13</name>
<displayName>OTG_HS_HCSPLT13</displayName>
<description>OTG_HS host channel-13 split control
register</description>
<addressOffset>0x294</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT13</name>
<displayName>OTG_HS_HCINT13</displayName>
<description>OTG_HS host channel-13 interrupt
register</description>
<addressOffset>0x298</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK13</name>
<displayName>OTG_HS_HCINTMSK13</displayName>
<description>OTG_HS host channel-13 interrupt mask
register</description>
<addressOffset>0x29C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALLM response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ13</name>
<displayName>OTG_HS_HCTSIZ13</displayName>
<description>OTG_HS host channel-13 transfer size
register</description>
<addressOffset>0x2A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA13</name>
<displayName>OTG_HS_HCDMA13</displayName>
<description>OTG_HS host channel-13 DMA address
register</description>
<addressOffset>0x2A4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR14</name>
<displayName>OTG_HS_HCCHAR14</displayName>
<description>OTG_HS host channel-14 characteristics
register</description>
<addressOffset>0x2A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT14</name>
<displayName>OTG_HS_HCSPLT14</displayName>
<description>OTG_HS host channel-14 split control
register</description>
<addressOffset>0x2AC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT14</name>
<displayName>OTG_HS_HCINT14</displayName>
<description>OTG_HS host channel-14 interrupt
register</description>
<addressOffset>0x2B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK14</name>
<displayName>OTG_HS_HCINTMSK14</displayName>
<description>OTG_HS host channel-14 interrupt mask
register</description>
<addressOffset>0x2B4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLM</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAKM response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACKM response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ14</name>
<displayName>OTG_HS_HCTSIZ14</displayName>
<description>OTG_HS host channel-14 transfer size
register</description>
<addressOffset>0x2B8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA14</name>
<displayName>OTG_HS_HCDMA14</displayName>
<description>OTG_HS host channel-14 DMA address
register</description>
<addressOffset>0x2BC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCCHAR15</name>
<displayName>OTG_HS_HCCHAR15</displayName>
<description>OTG_HS host channel-15 characteristics
register</description>
<addressOffset>0x2C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>EPNUM</name>
<description>Endpoint number</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EPDIR</name>
<description>Endpoint direction</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSDEV</name>
<description>Low-speed device</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MC</name>
<description>Multi Count (MC) / Error Count
(EC)</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>22</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ODDFRM</name>
<description>Odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHDIS</name>
<description>Channel disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHENA</name>
<description>Channel enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCSPLT15</name>
<displayName>OTG_HS_HCSPLT15</displayName>
<description>OTG_HS host channel-15 split control
register</description>
<addressOffset>0x2C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>PRTADDR</name>
<description>Port address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>HUBADDR</name>
<description>Hub address</description>
<bitOffset>7</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>XACTPOS</name>
<description>XACTPOS</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>COMPLSPLT</name>
<description>Do complete split</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPLITEN</name>
<description>Split enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINT15</name>
<displayName>OTG_HS_HCINT15</displayName>
<description>OTG_HS host channel-15 interrupt
register</description>
<addressOffset>0x2C8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHH</name>
<description>Channel halted</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received
interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAK</name>
<description>NAK response received
interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK response received/transmitted
interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERR</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERR</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMOR</name>
<description>Frame overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERR</name>
<description>Data toggle error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCINTMSK15</name>
<displayName>OTG_HS_HCINTMSK15</displayName>
<description>OTG_HS host channel-15 interrupt mask
register</description>
<addressOffset>0x2CC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHHM</name>
<description>Channel halted mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBERR</name>
<description>AHB error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>STALL response received interrupt
mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NAKM</name>
<description>NAK response received interrupt
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACKM</name>
<description>ACK response received/transmitted
interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>Response received
interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXERRM</name>
<description>Transaction error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBERRM</name>
<description>Babble error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRMORM</name>
<description>Frame overrun mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTERRM</name>
<description>Data toggle error mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCTSIZ15</name>
<displayName>OTG_HS_HCTSIZ15</displayName>
<description>OTG_HS host channel-15 transfer size
register</description>
<addressOffset>0x2D0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>DPID</name>
<description>Data PID</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_HCDMA15</name>
<displayName>OTG_HS_HCDMA15</displayName>
<description>OTG_HS host channel-15 DMA address
register</description>
<addressOffset>0x2D4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="OTG1_HS_HOST">
<name>OTG2_HS_HOST</name>
<baseAddress>0x40080400</baseAddress>
</peripheral>
<peripheral>
<name>OTG1_HS_DEVICE</name>
<description>USB 1 on the go high speed</description>
<groupName>USB_OTG_HS</groupName>
<baseAddress>0x40040800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>OTG_HS_DCFG</name>
<displayName>OTG_HS_DCFG</displayName>
<description>OTG_HS device configuration
register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x02200000</resetValue>
<fields>
<field>
<name>DSPD</name>
<description>Device speed</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>NZLSOHSK</name>
<description>Nonzero-length status OUT
handshake</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAD</name>
<description>Device address</description>
<bitOffset>4</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PFIVL</name>
<description>Periodic (micro)frame
interval</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PERSCHIVL</name>
<description>Periodic scheduling
interval</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DCTL</name>
<displayName>OTG_HS_DCTL</displayName>
<description>OTG_HS device control register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>RWUSIG</name>
<description>Remote wakeup signaling</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SDIS</name>
<description>Soft disconnect</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GINSTS</name>
<description>Global IN NAK status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GONSTS</name>
<description>Global OUT NAK status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TCTL</name>
<description>Test control</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SGINAK</name>
<description>Set global IN NAK</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGINAK</name>
<description>Clear global IN NAK</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SGONAK</name>
<description>Set global OUT NAK</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CGONAK</name>
<description>Clear global OUT NAK</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>POPRGDNE</name>
<description>Power-on programming done</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DSTS</name>
<displayName>OTG_HS_DSTS</displayName>
<description>OTG_HS device status register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>SUSPSTS</name>
<description>Suspend status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENUMSPD</name>
<description>Enumerated speed</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EERR</name>
<description>Erratic error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FNSOF</name>
<description>Frame number of the received
SOF</description>
<bitOffset>8</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPMSK</name>
<displayName>OTG_HS_DIEPMSK</displayName>
<description>OTG_HS device IN endpoint common interrupt
mask register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed interrupt
mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDM</name>
<description>Endpoint disabled interrupt
mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOM</name>
<description>Timeout condition mask (nonisochronous
endpoints)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITTXFEMSK</name>
<description>IN token received when TxFIFO empty
mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INEPNMM</name>
<description>IN token received with EP mismatch
mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INEPNEM</name>
<description>IN endpoint NAK effective
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFURM</name>
<description>FIFO underrun mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIM</name>
<description>BNA interrupt mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPMSK</name>
<displayName>OTG_HS_DOEPMSK</displayName>
<description>OTG_HS device OUT endpoint common interrupt
mask register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRCM</name>
<description>Transfer completed interrupt
mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDM</name>
<description>Endpoint disabled interrupt
mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUPM</name>
<description>SETUP phase done mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDM</name>
<description>OUT token received when endpoint
disabled mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets received
mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPEM</name>
<description>OUT packet error mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOIM</name>
<description>BNA interrupt mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DAINT</name>
<displayName>OTG_HS_DAINT</displayName>
<description>OTG_HS device all endpoints interrupt
register</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>IEPINT</name>
<description>IN endpoint interrupt bits</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>OEPINT</name>
<description>OUT endpoint interrupt
bits</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DAINTMSK</name>
<displayName>OTG_HS_DAINTMSK</displayName>
<description>OTG_HS all endpoints interrupt mask
register</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>IEPM</name>
<description>IN EP interrupt mask bits</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>OEPM</name>
<description>OUT EP interrupt mask bits</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DVBUSDIS</name>
<displayName>OTG_HS_DVBUSDIS</displayName>
<description>OTG_HS device VBUS discharge time
register</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x000017D7</resetValue>
<fields>
<field>
<name>VBUSDT</name>
<description>Device VBUS discharge time</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DVBUSPULSE</name>
<displayName>OTG_HS_DVBUSPULSE</displayName>
<description>OTG_HS device VBUS pulsing time
register</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x000005B8</resetValue>
<fields>
<field>
<name>DVBUSP</name>
<description>Device VBUS pulsing time</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTHRCTL</name>
<displayName>OTG_HS_DTHRCTL</displayName>
<description>OTG_HS Device threshold control
register</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>NONISOTHREN</name>
<description>Nonisochronous IN endpoints threshold
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISOTHREN</name>
<description>ISO IN endpoint threshold
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXTHRLEN</name>
<description>Transmit threshold length</description>
<bitOffset>2</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>RXTHREN</name>
<description>Receive threshold enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXTHRLEN</name>
<description>Receive threshold length</description>
<bitOffset>17</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>ARPEN</name>
<description>Arbiter parking enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPEMPMSK</name>
<displayName>OTG_HS_DIEPEMPMSK</displayName>
<description>OTG_HS device IN endpoint FIFO empty
interrupt mask register</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTXFEM</name>
<description>IN EP Tx FIFO empty interrupt mask
bits</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DEACHINT</name>
<displayName>OTG_HS_DEACHINT</displayName>
<description>OTG_HS device each endpoint interrupt
register</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>IEP1INT</name>
<description>IN endpoint 1interrupt bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OEP1INT</name>
<description>OUT endpoint 1 interrupt
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DEACHINTMSK</name>
<displayName>OTG_HS_DEACHINTMSK</displayName>
<description>OTG_HS device each endpoint interrupt
register mask</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>IEP1INTM</name>
<description>IN Endpoint 1 interrupt mask
bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OEP1INTM</name>
<description>OUT Endpoint 1 interrupt mask
bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL0</name>
<displayName>OTG_HS_DIEPCTL0</displayName>
<description>OTG device endpoint-0 control
register</description>
<addressOffset>0x100</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL1</name>
<displayName>OTG_HS_DIEPCTL1</displayName>
<description>OTG device endpoint-1 control
register</description>
<addressOffset>0x120</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL2</name>
<displayName>OTG_HS_DIEPCTL2</displayName>
<description>OTG device endpoint-2 control
register</description>
<addressOffset>0x140</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL3</name>
<displayName>OTG_HS_DIEPCTL3</displayName>
<description>OTG device endpoint-3 control
register</description>
<addressOffset>0x160</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL4</name>
<displayName>OTG_HS_DIEPCTL4</displayName>
<description>OTG device endpoint-4 control
register</description>
<addressOffset>0x180</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL5</name>
<displayName>OTG_HS_DIEPCTL5</displayName>
<description>OTG device endpoint-5 control
register</description>
<addressOffset>0x1A0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL6</name>
<displayName>OTG_HS_DIEPCTL6</displayName>
<description>OTG device endpoint-6 control
register</description>
<addressOffset>0x1C0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPCTL7</name>
<displayName>OTG_HS_DIEPCTL7</displayName>
<description>OTG device endpoint-7 control
register</description>
<addressOffset>0x1E0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even/odd frame</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFNUM</name>
<description>TxFIFO number</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT0</name>
<displayName>OTG_HS_DIEPINT0</displayName>
<description>OTG device endpoint-0 interrupt
register</description>
<addressOffset>0x108</addressOffset>
<size>32</size>
<resetValue>0x00000080</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT1</name>
<displayName>OTG_HS_DIEPINT1</displayName>
<description>OTG device endpoint-1 interrupt
register</description>
<addressOffset>0x128</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT2</name>
<displayName>OTG_HS_DIEPINT2</displayName>
<description>OTG device endpoint-2 interrupt
register</description>
<addressOffset>0x148</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT3</name>
<displayName>OTG_HS_DIEPINT3</displayName>
<description>OTG device endpoint-3 interrupt
register</description>
<addressOffset>0x168</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT4</name>
<displayName>OTG_HS_DIEPINT4</displayName>
<description>OTG device endpoint-4 interrupt
register</description>
<addressOffset>0x188</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT5</name>
<displayName>OTG_HS_DIEPINT5</displayName>
<description>OTG device endpoint-5 interrupt
register</description>
<addressOffset>0x1A8</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT6</name>
<displayName>OTG_HS_DIEPINT6</displayName>
<description>OTG device endpoint-6 interrupt
register</description>
<addressOffset>0x1C8</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPINT7</name>
<displayName>OTG_HS_DIEPINT7</displayName>
<description>OTG device endpoint-7 interrupt
register</description>
<addressOffset>0x1E8</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOC</name>
<description>Timeout condition</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ITTXFE</name>
<description>IN token received when TxFIFO is
empty</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INEPNE</name>
<description>IN endpoint NAK effective</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXFE</name>
<description>Transmit FIFO empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXFIFOUDRN</name>
<description>Transmit Fifo Underrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BNA</name>
<description>Buffer not available
interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PKTDRPSTS</name>
<description>Packet dropped status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BERR</name>
<description>Babble error interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NAK</name>
<description>NAK interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ0</name>
<displayName>OTG_HS_DIEPTSIZ0</displayName>
<description>OTG_HS device IN endpoint 0 transfer size
register</description>
<addressOffset>0x110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPDMA1</name>
<displayName>OTG_HS_DIEPDMA1</displayName>
<description>OTG_HS device endpoint-1 DMA address
register</description>
<addressOffset>0x114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPDMA2</name>
<displayName>OTG_HS_DIEPDMA2</displayName>
<description>OTG_HS device endpoint-2 DMA address
register</description>
<addressOffset>0x134</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPDMA3</name>
<displayName>OTG_HS_DIEPDMA3</displayName>
<description>OTG_HS device endpoint-3 DMA address
register</description>
<addressOffset>0x154</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPDMA4</name>
<displayName>OTG_HS_DIEPDMA4</displayName>
<description>OTG_HS device endpoint-4 DMA address
register</description>
<addressOffset>0x174</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPDMA5</name>
<displayName>OTG_HS_DIEPDMA5</displayName>
<description>OTG_HS device endpoint-5 DMA address
register</description>
<addressOffset>0x194</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>DMAADDR</name>
<description>DMA address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS0</name>
<displayName>OTG_HS_DTXFSTS0</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x118</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS1</name>
<displayName>OTG_HS_DTXFSTS1</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x138</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS2</name>
<displayName>OTG_HS_DTXFSTS2</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x158</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS3</name>
<displayName>OTG_HS_DTXFSTS3</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x178</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS4</name>
<displayName>OTG_HS_DTXFSTS4</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x198</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS5</name>
<displayName>OTG_HS_DTXFSTS5</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x1B8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ1</name>
<displayName>OTG_HS_DIEPTSIZ1</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<addressOffset>0x130</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ2</name>
<displayName>OTG_HS_DIEPTSIZ2</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<addressOffset>0x150</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ3</name>
<displayName>OTG_HS_DIEPTSIZ3</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<addressOffset>0x170</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ4</name>
<displayName>OTG_HS_DIEPTSIZ4</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<addressOffset>0x190</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ5</name>
<displayName>OTG_HS_DIEPTSIZ5</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<addressOffset>0x1B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL0</name>
<displayName>OTG_HS_DOEPCTL0</displayName>
<description>OTG_HS device control OUT endpoint 0 control
register</description>
<addressOffset>0x300</addressOffset>
<size>32</size>
<resetValue>0x00008000</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL1</name>
<displayName>OTG_HS_DOEPCTL1</displayName>
<description>OTG device endpoint-1 control
register</description>
<addressOffset>0x320</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL2</name>
<displayName>OTG_HS_DOEPCTL2</displayName>
<description>OTG device endpoint-2 control
register</description>
<addressOffset>0x340</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL3</name>
<displayName>OTG_HS_DOEPCTL3</displayName>
<description>OTG device endpoint-3 control
register</description>
<addressOffset>0x360</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT0</name>
<displayName>OTG_HS_DOEPINT0</displayName>
<description>OTG_HS device endpoint-0 interrupt
register</description>
<addressOffset>0x308</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000080</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT1</name>
<displayName>OTG_HS_DOEPINT1</displayName>
<description>OTG_HS device endpoint-1 interrupt
register</description>
<addressOffset>0x328</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT2</name>
<displayName>OTG_HS_DOEPINT2</displayName>
<description>OTG_HS device endpoint-2 interrupt
register</description>
<addressOffset>0x348</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT3</name>
<displayName>OTG_HS_DOEPINT3</displayName>
<description>OTG_HS device endpoint-3 interrupt
register</description>
<addressOffset>0x368</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT4</name>
<displayName>OTG_HS_DOEPINT4</displayName>
<description>OTG_HS device endpoint-4 interrupt
register</description>
<addressOffset>0x388</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT5</name>
<displayName>OTG_HS_DOEPINT5</displayName>
<description>OTG_HS device endpoint-5 interrupt
register</description>
<addressOffset>0x3A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT6</name>
<displayName>OTG_HS_DOEPINT6</displayName>
<description>OTG_HS device endpoint-6 interrupt
register</description>
<addressOffset>0x3C8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPINT7</name>
<displayName>OTG_HS_DOEPINT7</displayName>
<description>OTG_HS device endpoint-7 interrupt
register</description>
<addressOffset>0x3E8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRC</name>
<description>Transfer completed
interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPDISD</name>
<description>Endpoint disabled
interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUP</name>
<description>SETUP phase done</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OTEPDIS</name>
<description>OUT token received when endpoint
disabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2BSTUP</name>
<description>Back-to-back SETUP packets
received</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NYET</name>
<description>NYET interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ0</name>
<displayName>OTG_HS_DOEPTSIZ0</displayName>
<description>OTG_HS device endpoint-0 transfer size
register</description>
<addressOffset>0x310</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STUPCNT</name>
<description>SETUP packet count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ1</name>
<displayName>OTG_HS_DOEPTSIZ1</displayName>
<description>OTG_HS device endpoint-1 transfer size
register</description>
<addressOffset>0x330</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ2</name>
<displayName>OTG_HS_DOEPTSIZ2</displayName>
<description>OTG_HS device endpoint-2 transfer size
register</description>
<addressOffset>0x350</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ3</name>
<displayName>OTG_HS_DOEPTSIZ3</displayName>
<description>OTG_HS device endpoint-3 transfer size
register</description>
<addressOffset>0x370</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ4</name>
<displayName>OTG_HS_DOEPTSIZ4</displayName>
<description>OTG_HS device endpoint-4 transfer size
register</description>
<addressOffset>0x390</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ6</name>
<displayName>OTG_HS_DIEPTSIZ6</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<alternateRegister>OTG_HS_DIEPCTL5</alternateRegister>
<addressOffset>0x1A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS6</name>
<displayName>OTG_HS_DTXFSTS6</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x1A4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DIEPTSIZ7</name>
<displayName>OTG_HS_DIEPTSIZ7</displayName>
<description>OTG_HS device endpoint transfer size
register</description>
<alternateRegister>OTG_HS_DIEPINT5</alternateRegister>
<addressOffset>0x1A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>Multi count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DTXFSTS7</name>
<displayName>OTG_HS_DTXFSTS7</displayName>
<description>OTG_HS device IN endpoint transmit FIFO
status register</description>
<addressOffset>0x1AC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>INEPTFSAV</name>
<description>IN endpoint TxFIFO space
avail</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL4</name>
<displayName>OTG_HS_DOEPCTL4</displayName>
<description>OTG device endpoint-4 control
register</description>
<addressOffset>0x380</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL5</name>
<displayName>OTG_HS_DOEPCTL5</displayName>
<description>OTG device endpoint-5 control
register</description>
<addressOffset>0x3A0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL6</name>
<displayName>OTG_HS_DOEPCTL6</displayName>
<description>OTG device endpoint-6 control
register</description>
<addressOffset>0x3C0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPCTL7</name>
<displayName>OTG_HS_DOEPCTL7</displayName>
<description>OTG device endpoint-7 control
register</description>
<addressOffset>0x3E0</addressOffset>
<size>32</size>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>MPSIZ</name>
<description>Maximum packet size</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAEP</name>
<description>USB active endpoint</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EONUM_DPID</name>
<description>Even odd frame/Endpoint data
PID</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAKSTS</name>
<description>NAK status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPTYP</name>
<description>Endpoint type</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNPM</name>
<description>Snoop mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Stall</name>
<description>STALL handshake</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CNAK</name>
<description>Clear NAK</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SNAK</name>
<description>Set NAK</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SD0PID_SEVNFRM</name>
<description>Set DATA0 PID/Set even
frame</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SODDFRM</name>
<description>Set odd frame</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPDIS</name>
<description>Endpoint disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPENA</name>
<description>Endpoint enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ5</name>
<displayName>OTG_HS_DOEPTSIZ5</displayName>
<description>OTG_HS device endpoint-5 transfer size
register</description>
<addressOffset>0x3B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ6</name>
<displayName>OTG_HS_DOEPTSIZ6</displayName>
<description>OTG_HS device endpoint-6 transfer size
register</description>
<addressOffset>0x3D0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>OTG_HS_DOEPTSIZ7</name>
<displayName>OTG_HS_DOEPTSIZ7</displayName>
<description>OTG_HS device endpoint-7 transfer size
register</description>
<addressOffset>0x3F0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>XFRSIZ</name>
<description>Transfer size</description>
<bitOffset>0</bitOffset>
<bitWidth>19</bitWidth>
</field>
<field>
<name>PKTCNT</name>
<description>Packet count</description>
<bitOffset>19</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>RXDPID_STUPCNT</name>
<description>Received data PID/SETUP packet
count</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="OTG1_HS_DEVICE">
<name>OTG2_HS_DEVICE</name>
<baseAddress>0x40080800</baseAddress>
</peripheral>
<peripheral>
<name>OTG1_HS_PWRCLK</name>
<description>USB 1 on the go high speed</description>
<groupName>USB_OTG_HS</groupName>
<baseAddress>0x40040E00</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x3F200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>OTG_HS_PCGCR</name>
<displayName>OTG_HS_PCGCR</displayName>
<description>Power and clock gating control
register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0</resetValue>
<fields>
<field>
<name>STPPCLK</name>
<description>Stop PHY clock</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GATEHCLK</name>
<description>Gate HCLK</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PHYSUSP</name>
<description>PHY suspended</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="OTG1_HS_PWRCLK">
<name>OTG2_HS_PWRCLK</name>
<baseAddress>0x40080E00</baseAddress>
</peripheral>
<peripheral>
<name>Ethernet_DMA</name>
<description>Ethernet: DMA mode register (DMA)</description>
<groupName>Ethernet</groupName>
<baseAddress>0x40029000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>DMAMR</name>
<displayName>DMAMR</displayName>
<description>DMA mode register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWR</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DA</name>
<description>DMA Tx or Rx Arbitration
Scheme</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXPR</name>
<description>Transmit priority</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PR</name>
<description>Priority ratio</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTM</name>
<description>Interrupt Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASBMR</name>
<displayName>DMASBMR</displayName>
<description>System bus mode register</description>
<addressOffset>0x04</addressOffset>
<size>0x20</size>
<resetValue>0x01010000</resetValue>
<fields>
<field>
<name>FB</name>
<description>Fixed Burst Length</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AAL</name>
<description>Address-Aligned Beats</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MB</name>
<description>Mixed Burst</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RB</name>
<description>Rebuild INCRx Burst</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAISR</name>
<displayName>DMAISR</displayName>
<description>Interrupt status register</description>
<addressOffset>0x08</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DC0IS</name>
<description>DMA Channel Interrupt
Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTLIS</name>
<description>MTL Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MACIS</name>
<description>MAC Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMADSR</name>
<displayName>DMADSR</displayName>
<description>Debug status register</description>
<addressOffset>0x0C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AXWHSTS</name>
<description>AHB Master Write Channel</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RPS0</name>
<description>DMA Channel Receive Process
State</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TPS0</name>
<description>DMA Channel Transmit Process
State</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACCR</name>
<displayName>DMACCR</displayName>
<description>Channel control register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MSS</name>
<description>Maximum Segment Size</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>PBLX8</name>
<description>8xPBL mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSL</name>
<description>Descriptor Skip Length</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACTxCR</name>
<displayName>DMACTxCR</displayName>
<description>Channel transmit control
register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ST</name>
<description>Start or Stop Transmission
Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSF</name>
<description>Operate on Second Packet</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSE</name>
<description>TCP Segmentation Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXPBL</name>
<description>Transmit Programmable Burst
Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACRxCR</name>
<displayName>DMACRxCR</displayName>
<description>Channel receive control
register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SR</name>
<description>Start or Stop Receive
Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RBSZ</name>
<description>Receive Buffer size</description>
<bitOffset>1</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>RXPBL</name>
<description>RXPBL</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>RPF</name>
<description>DMA Rx Channel Packet
Flush</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACTxDLAR</name>
<displayName>DMACTxDLAR</displayName>
<description>Channel Tx descriptor list address
register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TDESLA</name>
<description>Start of Transmit List</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACRxDLAR</name>
<displayName>DMACRxDLAR</displayName>
<description>Channel Rx descriptor list address
register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDESLA</name>
<description>Start of Receive List</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACTxDTPR</name>
<displayName>DMACTxDTPR</displayName>
<description>Channel Tx descriptor tail pointer
register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TDT</name>
<description>Transmit Descriptor Tail
Pointer</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACRxDTPR</name>
<displayName>DMACRxDTPR</displayName>
<description>Channel Rx descriptor tail pointer
register</description>
<addressOffset>0x128</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDT</name>
<description>Receive Descriptor Tail
Pointer</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACTxRLR</name>
<displayName>DMACTxRLR</displayName>
<description>Channel Tx descriptor ring length
register</description>
<addressOffset>0x12C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TDRL</name>
<description>Transmit Descriptor Ring
Length</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACRxRLR</name>
<displayName>DMACRxRLR</displayName>
<description>Channel Rx descriptor ring length
register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDRL</name>
<description>Receive Descriptor Ring
Length</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACIER</name>
<displayName>DMACIER</displayName>
<description>Channel interrupt enable
register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIE</name>
<description>Transmit Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSE</name>
<description>Transmit Stopped Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBUE</name>
<description>Transmit Buffer Unavailable
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RIE</name>
<description>Receive Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RBUE</name>
<description>Receive Buffer Unavailable
Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSE</name>
<description>Receive Stopped Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RWTE</name>
<description>Receive Watchdog Timeout
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETIE</name>
<description>Early Transmit Interrupt
Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERIE</name>
<description>Early Receive Interrupt
Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FBEE</name>
<description>Fatal Bus Error Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDEE</name>
<description>Context Descriptor Error
Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AIE</name>
<description>Abnormal Interrupt Summary
Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NIE</name>
<description>Normal Interrupt Summary
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACRxIWTR</name>
<displayName>DMACRxIWTR</displayName>
<description>Channel Rx interrupt watchdog timer
register</description>
<addressOffset>0x138</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RWT</name>
<description>Receive Interrupt Watchdog Timer
Count</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACCATxDR</name>
<displayName>DMACCATxDR</displayName>
<description>Channel current application transmit
descriptor register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CURTDESAPTR</name>
<description>Application Transmit Descriptor Address
Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACCARxDR</name>
<displayName>DMACCARxDR</displayName>
<description>Channel current application receive
descriptor register</description>
<addressOffset>0x14C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CURRDESAPTR</name>
<description>Application Receive Descriptor Address
Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACCATxBR</name>
<displayName>DMACCATxBR</displayName>
<description>Channel current application transmit buffer
register</description>
<addressOffset>0x154</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CURTBUFAPTR</name>
<description>Application Transmit Buffer Address
Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACCARxBR</name>
<displayName>DMACCARxBR</displayName>
<description>Channel current application receive buffer
register</description>
<addressOffset>0x15C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CURRBUFAPTR</name>
<description>Application Receive Buffer Address
Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMACSR</name>
<displayName>DMACSR</displayName>
<description>Channel status register</description>
<addressOffset>0x160</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TI</name>
<description>Transmit Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TPS</name>
<description>Transmit Process Stopped</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TBU</name>
<description>Transmit Buffer
Unavailable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RI</name>
<description>Receive Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RBU</name>
<description>Receive Buffer Unavailable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RPS</name>
<description>Receive Process Stopped</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RWT</name>
<description>Receive Watchdog Timeout</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ET</name>
<description>Early Transmit Interrupt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ER</name>
<description>Early Receive Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FBE</name>
<description>Fatal Bus Error</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CDE</name>
<description>Context Descriptor Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AIS</name>
<description>Abnormal Interrupt Summary</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NIS</name>
<description>Normal Interrupt Summary</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TEB</name>
<description>Tx DMA Error Bits</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>REB</name>
<description>Rx DMA Error Bits</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMACMFCR</name>
<displayName>DMACMFCR</displayName>
<description>Channel missed frame count
register</description>
<addressOffset>0x16C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MFC</name>
<description>Dropped Packet Counters</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>MFCO</name>
<description>Overflow status of the MFC
Counter</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>Ethernet_MTL</name>
<description>Ethernet: MTL mode register (MTL)</description>
<groupName>Ethernet</groupName>
<baseAddress>0x40028C00</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MTLOMR</name>
<displayName>MTLOMR</displayName>
<description>Operating mode Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTXSTS</name>
<description>DTXSTS</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTPRST</name>
<description>CNTPRST</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTCLR</name>
<description>CNTCLR</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MTLISR</name>
<displayName>MTLISR</displayName>
<description>Interrupt status Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>Q0IS</name>
<description>Queue interrupt status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MTLTxQOMR</name>
<displayName>MTLTxQOMR</displayName>
<description>Tx queue operating mode
Register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<resetValue>0x00070008</resetValue>
<fields>
<field>
<name>FTQ</name>
<description>Flush Transmit Queue</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSF</name>
<description>Transmit Store and Forward</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXQEN</name>
<description>Transmit Queue Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TTC</name>
<description>Transmit Threshold Control</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TQS</name>
<description>Transmit Queue Size</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MTLTxQUR</name>
<displayName>MTLTxQUR</displayName>
<description>Tx queue underflow register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UFFRMCNT</name>
<description>Underflow Packet Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>UFCNTOVF</name>
<description>UFCNTOVF</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MTLTxQDR</name>
<displayName>MTLTxQDR</displayName>
<description>Tx queue debug Register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXQPAUSED</name>
<description>TXQPAUSED</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCSTS</name>
<description>TRCSTS</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TWCSTS</name>
<description>TWCSTS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXQSTS</name>
<description>TXQSTS</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTSFSTS</name>
<description>TXSTSFSTS</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTXQ</name>
<description>PTXQ</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>STXSTSF</name>
<description>STXSTSF</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>MTLQICSR</name>
<displayName>MTLQICSR</displayName>
<description>Queue interrupt control status
Register</description>
<addressOffset>0x12C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXUNFIS</name>
<description>TXUNFIS</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUIE</name>
<description>TXUIE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVFIS</name>
<description>RXOVFIS</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOIE</name>
<description>RXOIE</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MTLRxQOMR</name>
<displayName>MTLRxQOMR</displayName>
<description>Rx queue operating mode
register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<resetValue>0x00700000</resetValue>
<fields>
<field>
<name>RTC</name>
<description>RTC</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FUP</name>
<description>FUP</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FEP</name>
<description>FEP</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RSF</name>
<description>RSF</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIS_TCP_EF</name>
<description>DIS_TCP_EF</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EHFC</name>
<description>EHFC</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RFA</name>
<description>RFA</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RFD</name>
<description>RFD</description>
<bitOffset>14</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RQS</name>
<description>RQS</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MTLRxQMPOCR</name>
<displayName>MTLRxQMPOCR</displayName>
<description>Rx queue missed packet and overflow counter
register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVFPKTCNT</name>
<description>OVFPKTCNT</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>OVFCNTOVF</name>
<description>OVFCNTOVF</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MISPKTCNT</name>
<description>MISPKTCNT</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>MISCNTOVF</name>
<description>MISCNTOVF</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MTLRxQDR</name>
<displayName>MTLRxQDR</displayName>
<description>Rx queue debug register</description>
<addressOffset>0x138</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RWCSTS</name>
<description>RWCSTS</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RRCSTS</name>
<description>RRCSTS</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RXQSTS</name>
<description>RXQSTS</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PRXQ</name>
<description>PRXQ</description>
<bitOffset>16</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>Ethernet_MAC</name>
<description>Ethernet: media access control (MAC)</description>
<groupName>Ethernet</groupName>
<baseAddress>0x40028000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0xBDF</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ETH</name>
<description>Ethernet global interrupt</description>
<value>61</value>
</interrupt>
<registers>
<register>
<name>MACCR</name>
<displayName>MACCR</displayName>
<description>Operating mode configuration
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RE</name>
<description>Receiver Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE</name>
<description>TE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRELEN</name>
<description>PRELEN</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DC</name>
<description>DC</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BL</name>
<description>BL</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DR</name>
<description>DR</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCRS</name>
<description>DCRS</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DO</name>
<description>DO</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECRSFD</name>
<description>ECRSFD</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LM</name>
<description>LM</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DM</name>
<description>DM</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FES</name>
<description>FES</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JE</name>
<description>JE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JD</name>
<description>JD</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WD</name>
<description>WD</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACS</name>
<description>ACS</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CST</name>
<description>CST</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>S2KP</name>
<description>S2KP</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPSLCE</name>
<description>GPSLCE</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPG</name>
<description>IPG</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>IPC</name>
<description>IPC</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SARC</name>
<description>SARC</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>ARPEN</name>
<description>ARPEN</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACECR</name>
<displayName>MACECR</displayName>
<description>Extended operating mode configuration
register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GPSL</name>
<description>GPSL</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>DCRCC</name>
<description>DCRCC</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEN</name>
<description>SPEN</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USP</name>
<description>USP</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIPGEN</name>
<description>EIPGEN</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIPG</name>
<description>EIPG</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPFR</name>
<displayName>MACPFR</displayName>
<description>Packet filtering control
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PR</name>
<description>PR</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HUC</name>
<description>HUC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HMC</name>
<description>HMC</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAIF</name>
<description>DAIF</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PM</name>
<description>PM</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBF</name>
<description>DBF</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCF</name>
<description>PCF</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SAIF</name>
<description>SAIF</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAF</name>
<description>SAF</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPF</name>
<description>HPF</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VTFE</name>
<description>VTFE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPFE</name>
<description>IPFE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNTU</name>
<description>DNTU</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RA</name>
<description>RA</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACWTR</name>
<displayName>MACWTR</displayName>
<description>Watchdog timeout register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WTO</name>
<description>WTO</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PWE</name>
<description>PWE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACHT0R</name>
<displayName>MACHT0R</displayName>
<description>Hash Table 0 register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HT31T0</name>
<description>HT31T0</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACHT1R</name>
<displayName>MACHT1R</displayName>
<description>Hash Table 1 register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HT63T32</name>
<description>HT63T32</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACVTR</name>
<displayName>MACVTR</displayName>
<description>VLAN tag register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VL</name>
<description>VL</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>ETV</name>
<description>ETV</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VTIM</name>
<description>VTIM</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ESVL</name>
<description>ESVL</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERSVLM</name>
<description>ERSVLM</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DOVLTC</name>
<description>DOVLTC</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVLS</name>
<description>EVLS</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EVLRXS</name>
<description>EVLRXS</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VTHM</name>
<description>VTHM</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EDVLP</name>
<description>EDVLP</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERIVLT</name>
<description>ERIVLT</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIVLS</name>
<description>EIVLS</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EIVLRXS</name>
<description>EIVLRXS</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACVHTR</name>
<displayName>MACVHTR</displayName>
<description>VLAN Hash table register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VLHT</name>
<description>VLHT</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACVIR</name>
<displayName>MACVIR</displayName>
<description>VLAN inclusion register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VLT</name>
<description>VLT</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>VLC</name>
<description>VLC</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>VLP</name>
<description>VLP</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSVL</name>
<description>CSVL</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VLTI</name>
<description>VLTI</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACIVIR</name>
<displayName>MACIVIR</displayName>
<description>Inner VLAN inclusion register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VLT</name>
<description>VLT</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>VLC</name>
<description>VLC</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>VLP</name>
<description>VLP</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSVL</name>
<description>CSVL</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VLTI</name>
<description>VLTI</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACQTxFCR</name>
<displayName>MACQTxFCR</displayName>
<description>Tx Queue flow control register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FCB_BPA</name>
<description>FCB_BPA</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TFE</name>
<description>TFE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PLT</name>
<description>PLT</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DZPQ</name>
<description>DZPQ</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PT</name>
<description>PT</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACRxFCR</name>
<displayName>MACRxFCR</displayName>
<description>Rx flow control register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RFE</name>
<description>RFE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UP</name>
<description>UP</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACISR</name>
<displayName>MACISR</displayName>
<description>Interrupt status register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PHYIS</name>
<description>PHYIS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMTIS</name>
<description>PMTIS</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPIIS</name>
<description>LPIIS</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMCIS</name>
<description>MMCIS</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMCRXIS</name>
<description>MMCRXIS</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMCTXIS</name>
<description>MMCTXIS</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSIS</name>
<description>TSIS</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTSIS</name>
<description>TXSTSIS</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTSIS</name>
<description>RXSTSIS</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACIER</name>
<displayName>MACIER</displayName>
<description>Interrupt enable register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PHYIE</name>
<description>PHYIE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMTIE</name>
<description>PMTIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPIIE</name>
<description>LPIIE</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSIE</name>
<description>TSIE</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTSIE</name>
<description>TXSTSIE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTSIE</name>
<description>RXSTSIE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACRxTxSR</name>
<displayName>MACRxTxSR</displayName>
<description>Rx Tx status register</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TJT</name>
<description>TJT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NCARR</name>
<description>NCARR</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCARR</name>
<description>LCARR</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXDEF</name>
<description>EXDEF</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCOL</name>
<description>LCOL</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCOL</name>
<description>LCOL</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RWT</name>
<description>RWT</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPCSR</name>
<displayName>MACPCSR</displayName>
<description>PMT control status register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PWRDWN</name>
<description>PWRDWN</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MGKPKTEN</name>
<description>MGKPKTEN</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RWKPKTEN</name>
<description>RWKPKTEN</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MGKPRCVD</name>
<description>MGKPRCVD</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RWKPRCVD</name>
<description>RWKPRCVD</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GLBLUCAST</name>
<description>GLBLUCAST</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RWKPFE</name>
<description>RWKPFE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RWKPTR</name>
<description>RWKPTR</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RWKFILTRST</name>
<description>RWKFILTRST</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MACRWKPFR</name>
<displayName>MACRWKPFR</displayName>
<description>Remove wakeup packet filter
register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MACRWKPFR</name>
<description>MACRWKPFR</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACLCSR</name>
<displayName>MACLCSR</displayName>
<description>LPI control status register</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TLPIEN</name>
<description>TLPIEN</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TLPIEX</name>
<description>TLPIEX</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RLPIEN</name>
<description>RLPIEN</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RLPIEX</name>
<description>RLPIEX</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TLPIST</name>
<description>TLPIST</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RLPIST</name>
<description>RLPIST</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LPIEN</name>
<description>LPIEN</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLS</name>
<description>PLS</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLSEN</name>
<description>PLSEN</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPITXA</name>
<description>LPITXA</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPITE</name>
<description>LPITE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MACLTCR</name>
<displayName>MACLTCR</displayName>
<description>LPI timers control register</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x03E80000</resetValue>
<fields>
<field>
<name>TWT</name>
<description>TWT</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>LST</name>
<description>LST</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACLETR</name>
<displayName>MACLETR</displayName>
<description>LPI entry timer register</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LPIET</name>
<description>LPIET</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
</fields>
</register>
<register>
<name>MAC1USTCR</name>
<displayName>MAC1USTCR</displayName>
<description>1-microsecond-tick counter
register</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIC_1US_CNTR</name>
<description>TIC_1US_CNTR</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACVR</name>
<displayName>MACVR</displayName>
<description>Version register</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00003041</resetValue>
<fields>
<field>
<name>SNPSVER</name>
<description>SNPSVER</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>USERVER</name>
<description>USERVER</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACDR</name>
<displayName>MACDR</displayName>
<description>Debug register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RPESTS</name>
<description>RPESTS</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RFCFCSTS</name>
<description>RFCFCSTS</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TPESTS</name>
<description>TPESTS</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TFCSTS</name>
<description>TFCSTS</description>
<bitOffset>17</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACHWF1R</name>
<displayName>MACHWF1R</displayName>
<description>HW feature 1 register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x11841904</resetValue>
<fields>
<field>
<name>RXFIFOSIZE</name>
<description>RXFIFOSIZE</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TXFIFOSIZE</name>
<description>TXFIFOSIZE</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OSTEN</name>
<description>OSTEN</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTOEN</name>
<description>PTOEN</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADVTHWORD</name>
<description>ADVTHWORD</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR64</name>
<description>ADDR64</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DCBEN</name>
<description>DCBEN</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPHEN</name>
<description>SPHEN</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSOEN</name>
<description>TSOEN</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGMEMA</name>
<description>DBGMEMA</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AVSEL</name>
<description>AVSEL</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HASHTBLSZ</name>
<description>HASHTBLSZ</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>L3L4FNUM</name>
<description>L3L4FNUM</description>
<bitOffset>27</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACHWF2R</name>
<displayName>MACHWF2R</displayName>
<description>HW feature 2 register</description>
<addressOffset>0x124</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x41000000</resetValue>
<fields>
<field>
<name>RXQCNT</name>
<description>RXQCNT</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TXQCNT</name>
<description>TXQCNT</description>
<bitOffset>6</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RXCHCNT</name>
<description>RXCHCNT</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TXCHCNT</name>
<description>TXCHCNT</description>
<bitOffset>18</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PPSOUTNUM</name>
<description>PPSOUTNUM</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AUXSNAPNUM</name>
<description>AUXSNAPNUM</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACMDIOAR</name>
<displayName>MACMDIOAR</displayName>
<description>MDIO address register</description>
<addressOffset>0x200</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MB</name>
<description>MB</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C45E</name>
<description>C45E</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GOC</name>
<description>GOC</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SKAP</name>
<description>SKAP</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CR</name>
<description>CR</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>NTC</name>
<description>NTC</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RDA</name>
<description>RDA</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>PA</name>
<description>PA</description>
<bitOffset>21</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>BTB</name>
<description>BTB</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSE</name>
<description>PSE</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACMDIODR</name>
<displayName>MACMDIODR</displayName>
<description>MDIO data register</description>
<addressOffset>0x204</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MD</name>
<description>MD</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>RA</name>
<description>RA</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACARPAR</name>
<displayName>MACARPAR</displayName>
<description>ARP address register</description>
<addressOffset>0xAE0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARPPA</name>
<description>ARPPA</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA0HR</name>
<displayName>MACA0HR</displayName>
<description>Address 0 high register</description>
<addressOffset>0x300</addressOffset>
<size>0x20</size>
<resetValue>0x8000FFFF</resetValue>
<fields>
<field>
<name>ADDRHI</name>
<description>ADDRHI</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AE</name>
<description>AE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MACA0LR</name>
<displayName>MACA0LR</displayName>
<description>Address 0 low register</description>
<addressOffset>0x304</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>ADDRLO</name>
<description>ADDRLO</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA1LR</name>
<displayName>MACA1LR</displayName>
<description>Address 1 low register</description>
<addressOffset>0x30C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>ADDRLO</name>
<description>ADDRLO</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA2LR</name>
<displayName>MACA2LR</displayName>
<description>Address 2 low register</description>
<addressOffset>0x314</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>ADDRLO</name>
<description>ADDRLO</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA1HR</name>
<displayName>MACA1HR</displayName>
<description>Address 1 high register</description>
<addressOffset>0x308</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>ADDRHI</name>
<description>ADDRHI</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>MBC</name>
<description>MBC</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SA</name>
<description>SA</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AE</name>
<description>AE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA2HR</name>
<displayName>MACA2HR</displayName>
<description>Address 2 high register</description>
<addressOffset>0x310</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>ADDRHI</name>
<description>ADDRHI</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>MBC</name>
<description>MBC</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SA</name>
<description>SA</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AE</name>
<description>AE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA3HR</name>
<displayName>MACA3HR</displayName>
<description>Address 3 high register</description>
<addressOffset>0x318</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>ADDRHI</name>
<description>ADDRHI</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>MBC</name>
<description>MBC</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SA</name>
<description>SA</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AE</name>
<description>AE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACA3LR</name>
<displayName>MACA3LR</displayName>
<description>Address 3 low register</description>
<addressOffset>0x31C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>ADDRLO</name>
<description>ADDRLO</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MMC_CONTROL</name>
<displayName>MMC_CONTROL</displayName>
<description>MMC control register</description>
<addressOffset>0x700</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNTRST</name>
<description>CNTRST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTSTOPRO</name>
<description>CNTSTOPRO</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTONRD</name>
<description>RSTONRD</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTFREEZ</name>
<description>CNTFREEZ</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTPRST</name>
<description>CNTPRST</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTPRSTLVL</name>
<description>CNTPRSTLVL</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UCDBC</name>
<description>UCDBC</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MMC_RX_INTERRUPT</name>
<displayName>MMC_RX_INTERRUPT</displayName>
<description>MMC Rx interrupt register</description>
<addressOffset>0x704</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCRCERPIS</name>
<description>RXCRCERPIS</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXALGNERPIS</name>
<description>RXALGNERPIS</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXUCGPIS</name>
<description>RXUCGPIS</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXLPIUSCIS</name>
<description>RXLPIUSCIS</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXLPITRCIS</name>
<description>RXLPITRCIS</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MMC_TX_INTERRUPT</name>
<displayName>MMC_TX_INTERRUPT</displayName>
<description>MMC Tx interrupt register</description>
<addressOffset>0x708</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXSCOLGPIS</name>
<description>TXSCOLGPIS</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXMCOLGPIS</name>
<description>TXMCOLGPIS</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXGPKTIS</name>
<description>TXGPKTIS</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXLPIUSCIS</name>
<description>TXLPIUSCIS</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXLPITRCIS</name>
<description>TXLPITRCIS</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MMC_RX_INTERRUPT_MASK</name>
<displayName>MMC_RX_INTERRUPT_MASK</displayName>
<description>MMC Rx interrupt mask register</description>
<addressOffset>0x70C</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCRCERPIM</name>
<description>RXCRCERPIM</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXALGNERPIM</name>
<description>RXALGNERPIM</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXUCGPIM</name>
<description>RXUCGPIM</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXLPIUSCIM</name>
<description>RXLPIUSCIM</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXLPITRCIM</name>
<description>RXLPITRCIM</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MMC_TX_INTERRUPT_MASK</name>
<displayName>MMC_TX_INTERRUPT_MASK</displayName>
<description>MMC Tx interrupt mask register</description>
<addressOffset>0x710</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXSCOLGPIM</name>
<description>TXSCOLGPIM</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXMCOLGPIM</name>
<description>TXMCOLGPIM</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXGPKTIM</name>
<description>TXGPKTIM</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXLPIUSCIM</name>
<description>TXLPIUSCIM</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXLPITRCIM</name>
<description>TXLPITRCIM</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TX_SINGLE_COLLISION_GOOD_PACKETS</name>
<displayName>
TX_SINGLE_COLLISION_GOOD_PACKETS</displayName>
<description>Tx single collision good packets
register</description>
<addressOffset>0x74C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXSNGLCOLG</name>
<description>TXSNGLCOLG</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TX_MULTIPLE_COLLISION_GOOD_PACKETS</name>
<displayName>
TX_MULTIPLE_COLLISION_GOOD_PACKETS</displayName>
<description>Tx multiple collision good packets
register</description>
<addressOffset>0x750</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXMULTCOLG</name>
<description>TXMULTCOLG</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TX_PACKET_COUNT_GOOD</name>
<displayName>TX_PACKET_COUNT_GOOD</displayName>
<description>Tx packet count good register</description>
<addressOffset>0x768</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPKTG</name>
<description>TXPKTG</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RX_CRC_ERROR_PACKETS</name>
<displayName>RX_CRC_ERROR_PACKETS</displayName>
<description>Rx CRC error packets register</description>
<addressOffset>0x794</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCRCERR</name>
<description>RXCRCERR</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RX_ALIGNMENT_ERROR_PACKETS</name>
<displayName>RX_ALIGNMENT_ERROR_PACKETS</displayName>
<description>Rx alignment error packets
register</description>
<addressOffset>0x798</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXALGNERR</name>
<description>RXALGNERR</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RX_UNICAST_PACKETS_GOOD</name>
<displayName>RX_UNICAST_PACKETS_GOOD</displayName>
<description>Rx unicast packets good
register</description>
<addressOffset>0x7C4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXUCASTG</name>
<description>RXUCASTG</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TX_LPI_USEC_CNTR</name>
<displayName>TX_LPI_USEC_CNTR</displayName>
<description>Tx LPI microsecond timer
register</description>
<addressOffset>0x7EC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXLPIUSC</name>
<description>TXLPIUSC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TX_LPI_TRAN_CNTR</name>
<displayName>TX_LPI_TRAN_CNTR</displayName>
<description>Tx LPI transition counter
register</description>
<addressOffset>0x7F0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXLPITRC</name>
<description>TXLPITRC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RX_LPI_USEC_CNTR</name>
<displayName>RX_LPI_USEC_CNTR</displayName>
<description>Rx LPI microsecond counter
register</description>
<addressOffset>0x7F4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXLPIUSC</name>
<description>RXLPIUSC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RX_LPI_TRAN_CNTR</name>
<displayName>RX_LPI_TRAN_CNTR</displayName>
<description>Rx LPI transition counter
register</description>
<addressOffset>0x7F8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXLPITRC</name>
<description>RXLPITRC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3L4C0R</name>
<displayName>MACL3L4C0R</displayName>
<description>L3 and L4 control 0 register</description>
<addressOffset>0x900</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3PEN0</name>
<description>L3PEN0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3SAM0</name>
<description>L3SAM0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3SAIM0</name>
<description>L3SAIM0</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3DAM0</name>
<description>L3DAM0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3DAIM0</name>
<description>L3DAIM0</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3HSBM0</name>
<description>L3HSBM0</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>L3HDBM0</name>
<description>L3HDBM0</description>
<bitOffset>11</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>L4PEN0</name>
<description>L4PEN0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4SPM0</name>
<description>L4SPM0</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4SPIM0</name>
<description>L4SPIM0</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4DPM0</name>
<description>L4DPM0</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4DPIM0</name>
<description>L4DPIM0</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL4A0R</name>
<displayName>MACL4A0R</displayName>
<description>Layer4 address filter 0
register</description>
<addressOffset>0x904</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L4SP0</name>
<description>L4SP0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>L4DP0</name>
<description>L4DP0</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A00R</name>
<displayName>MACL3A00R</displayName>
<description>MACL3A00R</description>
<addressOffset>0x910</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A00</name>
<description>L3A00</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A10R</name>
<displayName>MACL3A10R</displayName>
<description>Layer3 address 1 filter 0
register</description>
<addressOffset>0x914</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A10</name>
<description>L3A10</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A20</name>
<displayName>MACL3A20</displayName>
<description>Layer3 Address 2 filter 0
register</description>
<addressOffset>0x918</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A20</name>
<description>L3A20</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A30</name>
<displayName>MACL3A30</displayName>
<description>Layer3 Address 3 filter 0
register</description>
<addressOffset>0x91C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A30</name>
<description>L3A30</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3L4C1R</name>
<displayName>MACL3L4C1R</displayName>
<description>L3 and L4 control 1 register</description>
<addressOffset>0x930</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3PEN1</name>
<description>L3PEN1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3SAM1</name>
<description>L3SAM1</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3SAIM1</name>
<description>L3SAIM1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3DAM1</name>
<description>L3DAM1</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3DAIM1</name>
<description>L3DAIM1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L3HSBM1</name>
<description>L3HSBM1</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>L3HDBM1</name>
<description>L3HDBM1</description>
<bitOffset>11</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>L4PEN1</name>
<description>L4PEN1</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4SPM1</name>
<description>L4SPM1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4SPIM1</name>
<description>L4SPIM1</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4DPM1</name>
<description>L4DPM1</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L4DPIM1</name>
<description>L4DPIM1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL4A1R</name>
<displayName>MACL4A1R</displayName>
<description>Layer 4 address filter 1
register</description>
<addressOffset>0x934</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L4SP1</name>
<description>L4SP1</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>L4DP1</name>
<description>L4DP1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A01R</name>
<displayName>MACL3A01R</displayName>
<description>Layer3 address 0 filter 1
Register</description>
<addressOffset>0x940</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A01</name>
<description>L3A01</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A11R</name>
<displayName>MACL3A11R</displayName>
<description>Layer3 address 1 filter 1
register</description>
<addressOffset>0x944</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A11</name>
<description>L3A11</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A21R</name>
<displayName>MACL3A21R</displayName>
<description>Layer3 address 2 filter 1
Register</description>
<addressOffset>0x948</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A21</name>
<description>L3A21</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACL3A31R</name>
<displayName>MACL3A31R</displayName>
<description>Layer3 address 3 filter 1
register</description>
<addressOffset>0x94C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>L3A31</name>
<description>L3A31</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSCR</name>
<displayName>MACTSCR</displayName>
<description>Timestamp control Register</description>
<addressOffset>0xB00</addressOffset>
<size>0x20</size>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>TSENA</name>
<description>TSENA</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSCFUPDT</name>
<description>TSCFUPDT</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSINIT</name>
<description>TSINIT</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSUPDT</name>
<description>TSUPDT</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSADDREG</name>
<description>TSADDREG</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSENALL</name>
<description>TSENALL</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSCTRLSSR</name>
<description>TSCTRLSSR</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSVER2ENA</name>
<description>TSVER2ENA</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSIPENA</name>
<description>TSIPENA</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSIPV6ENA</name>
<description>TSIPV6ENA</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSIPV4ENA</name>
<description>TSIPV4ENA</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSEVNTENA</name>
<description>TSEVNTENA</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSMSTRENA</name>
<description>TSMSTRENA</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SNAPTYPSEL</name>
<description>SNAPTYPSEL</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSENMACADDR</name>
<description>TSENMACADDR</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSC</name>
<description>CSC</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTSSTSM</name>
<description>TXTSSTSM</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MACSSIR</name>
<displayName>MACSSIR</displayName>
<description>Sub-second increment register</description>
<addressOffset>0xB04</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SNSINC</name>
<description>SNSINC</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SSINC</name>
<description>SSINC</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSTSR</name>
<displayName>MACSTSR</displayName>
<description>System time seconds register</description>
<addressOffset>0xB08</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSS</name>
<description>TSS</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSTNR</name>
<displayName>MACSTNR</displayName>
<description>System time nanoseconds
register</description>
<addressOffset>0xB0C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSSS</name>
<description>TSSS</description>
<bitOffset>0</bitOffset>
<bitWidth>31</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSTSUR</name>
<displayName>MACSTSUR</displayName>
<description>System time seconds update
register</description>
<addressOffset>0xB10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSS</name>
<description>TSS</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSTNUR</name>
<displayName>MACSTNUR</displayName>
<description>System time nanoseconds update
register</description>
<addressOffset>0xB14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSSS</name>
<description>TSSS</description>
<bitOffset>0</bitOffset>
<bitWidth>31</bitWidth>
</field>
<field>
<name>ADDSUB</name>
<description>ADDSUB</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSAR</name>
<displayName>MACTSAR</displayName>
<description>Timestamp addend register</description>
<addressOffset>0xB18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSAR</name>
<description>TSAR</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSSR</name>
<displayName>MACTSSR</displayName>
<description>Timestamp status register</description>
<addressOffset>0xB20</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSSOVF</name>
<description>TSSOVF</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTARGT0</name>
<description>TSTARGT0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AUXTSTRIG</name>
<description>AUXTSTRIG</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTRGTERR0</name>
<description>TSTRGTERR0</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXTSSIS</name>
<description>TXTSSIS</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ATSSTN</name>
<description>ATSSTN</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ATSSTM</name>
<description>ATSSTM</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ATSNS</name>
<description>ATSNS</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTxTSSNR</name>
<displayName>MACTxTSSNR</displayName>
<description>Tx timestamp status nanoseconds
register</description>
<addressOffset>0xB30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXTSSLO</name>
<description>TXTSSLO</description>
<bitOffset>0</bitOffset>
<bitWidth>31</bitWidth>
</field>
<field>
<name>TXTSSMIS</name>
<description>TXTSSMIS</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTxTSSSR</name>
<displayName>MACTxTSSSR</displayName>
<description>Tx timestamp status seconds
register</description>
<addressOffset>0xB34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXTSSHI</name>
<description>TXTSSHI</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACACR</name>
<displayName>MACACR</displayName>
<description>Auxiliary control register</description>
<addressOffset>0xB40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ATSFC</name>
<description>ATSFC</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ATSEN0</name>
<description>ATSEN0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ATSEN1</name>
<description>ATSEN1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ATSEN2</name>
<description>ATSEN2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ATSEN3</name>
<description>ATSEN3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACATSNR</name>
<displayName>MACATSNR</displayName>
<description>Auxiliary timestamp nanoseconds
register</description>
<addressOffset>0xB48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AUXTSLO</name>
<description>AUXTSLO</description>
<bitOffset>0</bitOffset>
<bitWidth>31</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACATSSR</name>
<displayName>MACATSSR</displayName>
<description>Auxiliary timestamp seconds
register</description>
<addressOffset>0xB4C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AUXTSHI</name>
<description>AUXTSHI</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSIACR</name>
<displayName>MACTSIACR</displayName>
<description>Timestamp Ingress asymmetric correction
register</description>
<addressOffset>0xB50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OSTIAC</name>
<description>OSTIAC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSEACR</name>
<displayName>MACTSEACR</displayName>
<description>Timestamp Egress asymmetric correction
register</description>
<addressOffset>0xB54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OSTEAC</name>
<description>OSTEAC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSICNR</name>
<displayName>MACTSICNR</displayName>
<description>Timestamp Ingress correction nanosecond
register</description>
<addressOffset>0xB58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSIC</name>
<description>TSIC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACTSECNR</name>
<displayName>MACTSECNR</displayName>
<description>Timestamp Egress correction nanosecond
register</description>
<addressOffset>0xB5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEC</name>
<description>TSEC</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPPSCR</name>
<displayName>MACPPSCR</displayName>
<description>PPS control register</description>
<addressOffset>0xB70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PPSCTRL</name>
<description>PPSCTRL</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PPSEN0</name>
<description>PPSEN0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRGTMODSEL0</name>
<description>TRGTMODSEL0</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPPSTTSR</name>
<displayName>MACPPSTTSR</displayName>
<description>PPS target time seconds
register</description>
<addressOffset>0xB80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSTRH0</name>
<description>TSTRH0</description>
<bitOffset>0</bitOffset>
<bitWidth>31</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPPSTTNR</name>
<displayName>MACPPSTTNR</displayName>
<description>PPS target time nanoseconds
register</description>
<addressOffset>0xB84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TTSL0</name>
<description>TTSL0</description>
<bitOffset>0</bitOffset>
<bitWidth>31</bitWidth>
</field>
<field>
<name>TRGTBUSY0</name>
<description>TRGTBUSY0</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPPSIR</name>
<displayName>MACPPSIR</displayName>
<description>PPS interval register</description>
<addressOffset>0xB88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PPSINT0</name>
<description>PPSINT0</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPPSWR</name>
<displayName>MACPPSWR</displayName>
<description>PPS width register</description>
<addressOffset>0xB8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PPSWIDTH0</name>
<description>PPSWIDTH0</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACPOCR</name>
<displayName>MACPOCR</displayName>
<description>PTP Offload control register</description>
<addressOffset>0xBC0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PTOEN</name>
<description>PTOEN</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASYNCEN</name>
<description>ASYNCEN</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>APDREQEN</name>
<description>APDREQEN</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASYNCTRIG</name>
<description>ASYNCTRIG</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>APDREQTRIG</name>
<description>APDREQTRIG</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRRDIS</name>
<description>DRRDIS</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DN</name>
<description>DN</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSPI0R</name>
<displayName>MACSPI0R</displayName>
<description>PTP Source Port Identity 0
Register</description>
<addressOffset>0xBC4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SPI0</name>
<description>SPI0</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSPI1R</name>
<displayName>MACSPI1R</displayName>
<description>PTP Source port identity 1
register</description>
<addressOffset>0xBC8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SPI1</name>
<description>SPI1</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACSPI2R</name>
<displayName>MACSPI2R</displayName>
<description>PTP Source port identity 2
register</description>
<addressOffset>0xBCC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SPI2</name>
<description>SPI2</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MACLMIR</name>
<displayName>MACLMIR</displayName>
<description>Log message interval register</description>
<addressOffset>0xBD0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LSI</name>
<description>LSI</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DRSYNCR</name>
<description>DRSYNCR</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>LMPDRI</name>
<description>LMPDRI</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMA1</name>
<description>DMA controller</description>
<groupName>DMA</groupName>
<baseAddress>0x40020000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMA_STR0</name>
<description>DMA1 Stream0</description>
<value>11</value>
</interrupt>
<interrupt>
<name>DMA_STR1</name>
<description>DMA1 Stream1</description>
<value>12</value>
</interrupt>
<interrupt>
<name>DMA1_STR7</name>
<description>DMA1 Stream7</description>
<value>47</value>
</interrupt>
<registers>
<register>
<name>LISR</name>
<displayName>LISR</displayName>
<description>low interrupt status register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCIF3</name>
<description>Stream x transfer complete interrupt
flag (x = 3..0)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF3</name>
<description>Stream x half transfer interrupt flag
(x=3..0)</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF3</name>
<description>Stream x transfer error interrupt flag
(x=3..0)</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF3</name>
<description>Stream x direct mode error interrupt
flag (x=3..0)</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF3</name>
<description>Stream x FIFO error interrupt flag
(x=3..0)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF2</name>
<description>Stream x transfer complete interrupt
flag (x = 3..0)</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF2</name>
<description>Stream x half transfer interrupt flag
(x=3..0)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF2</name>
<description>Stream x transfer error interrupt flag
(x=3..0)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF2</name>
<description>Stream x direct mode error interrupt
flag (x=3..0)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF2</name>
<description>Stream x FIFO error interrupt flag
(x=3..0)</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF1</name>
<description>Stream x transfer complete interrupt
flag (x = 3..0)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF1</name>
<description>Stream x half transfer interrupt flag
(x=3..0)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF1</name>
<description>Stream x transfer error interrupt flag
(x=3..0)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF1</name>
<description>Stream x direct mode error interrupt
flag (x=3..0)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF1</name>
<description>Stream x FIFO error interrupt flag
(x=3..0)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF0</name>
<description>Stream x transfer complete interrupt
flag (x = 3..0)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF0</name>
<description>Stream x half transfer interrupt flag
(x=3..0)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF0</name>
<description>Stream x transfer error interrupt flag
(x=3..0)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF0</name>
<description>Stream x direct mode error interrupt
flag (x=3..0)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF0</name>
<description>Stream x FIFO error interrupt flag
(x=3..0)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HISR</name>
<displayName>HISR</displayName>
<description>high interrupt status register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCIF7</name>
<description>Stream x transfer complete interrupt
flag (x=7..4)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF7</name>
<description>Stream x half transfer interrupt flag
(x=7..4)</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF7</name>
<description>Stream x transfer error interrupt flag
(x=7..4)</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF7</name>
<description>Stream x direct mode error interrupt
flag (x=7..4)</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF7</name>
<description>Stream x FIFO error interrupt flag
(x=7..4)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF6</name>
<description>Stream x transfer complete interrupt
flag (x=7..4)</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF6</name>
<description>Stream x half transfer interrupt flag
(x=7..4)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF6</name>
<description>Stream x transfer error interrupt flag
(x=7..4)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF6</name>
<description>Stream x direct mode error interrupt
flag (x=7..4)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF6</name>
<description>Stream x FIFO error interrupt flag
(x=7..4)</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF5</name>
<description>Stream x transfer complete interrupt
flag (x=7..4)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF5</name>
<description>Stream x half transfer interrupt flag
(x=7..4)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF5</name>
<description>Stream x transfer error interrupt flag
(x=7..4)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF5</name>
<description>Stream x direct mode error interrupt
flag (x=7..4)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF5</name>
<description>Stream x FIFO error interrupt flag
(x=7..4)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIF4</name>
<description>Stream x transfer complete interrupt
flag (x=7..4)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIF4</name>
<description>Stream x half transfer interrupt flag
(x=7..4)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIF4</name>
<description>Stream x transfer error interrupt flag
(x=7..4)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIF4</name>
<description>Stream x direct mode error interrupt
flag (x=7..4)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FEIF4</name>
<description>Stream x FIFO error interrupt flag
(x=7..4)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LIFCR</name>
<displayName>LIFCR</displayName>
<description>low interrupt flag clear
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTCIF3</name>
<description>Stream x clear transfer complete
interrupt flag (x = 3..0)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF3</name>
<description>Stream x clear half transfer interrupt
flag (x = 3..0)</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF3</name>
<description>Stream x clear transfer error interrupt
flag (x = 3..0)</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF3</name>
<description>Stream x clear direct mode error
interrupt flag (x = 3..0)</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF3</name>
<description>Stream x clear FIFO error interrupt flag
(x = 3..0)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF2</name>
<description>Stream x clear transfer complete
interrupt flag (x = 3..0)</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF2</name>
<description>Stream x clear half transfer interrupt
flag (x = 3..0)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF2</name>
<description>Stream x clear transfer error interrupt
flag (x = 3..0)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF2</name>
<description>Stream x clear direct mode error
interrupt flag (x = 3..0)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF2</name>
<description>Stream x clear FIFO error interrupt flag
(x = 3..0)</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF1</name>
<description>Stream x clear transfer complete
interrupt flag (x = 3..0)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF1</name>
<description>Stream x clear half transfer interrupt
flag (x = 3..0)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF1</name>
<description>Stream x clear transfer error interrupt
flag (x = 3..0)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF1</name>
<description>Stream x clear direct mode error
interrupt flag (x = 3..0)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF1</name>
<description>Stream x clear FIFO error interrupt flag
(x = 3..0)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF0</name>
<description>Stream x clear transfer complete
interrupt flag (x = 3..0)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF0</name>
<description>Stream x clear half transfer interrupt
flag (x = 3..0)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF0</name>
<description>Stream x clear transfer error interrupt
flag (x = 3..0)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF0</name>
<description>Stream x clear direct mode error
interrupt flag (x = 3..0)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF0</name>
<description>Stream x clear FIFO error interrupt flag
(x = 3..0)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HIFCR</name>
<displayName>HIFCR</displayName>
<description>high interrupt flag clear
register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CTCIF7</name>
<description>Stream x clear transfer complete
interrupt flag (x = 7..4)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF7</name>
<description>Stream x clear half transfer interrupt
flag (x = 7..4)</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF7</name>
<description>Stream x clear transfer error interrupt
flag (x = 7..4)</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF7</name>
<description>Stream x clear direct mode error
interrupt flag (x = 7..4)</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF7</name>
<description>Stream x clear FIFO error interrupt flag
(x = 7..4)</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF6</name>
<description>Stream x clear transfer complete
interrupt flag (x = 7..4)</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF6</name>
<description>Stream x clear half transfer interrupt
flag (x = 7..4)</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF6</name>
<description>Stream x clear transfer error interrupt
flag (x = 7..4)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF6</name>
<description>Stream x clear direct mode error
interrupt flag (x = 7..4)</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF6</name>
<description>Stream x clear FIFO error interrupt flag
(x = 7..4)</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF5</name>
<description>Stream x clear transfer complete
interrupt flag (x = 7..4)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF5</name>
<description>Stream x clear half transfer interrupt
flag (x = 7..4)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF5</name>
<description>Stream x clear transfer error interrupt
flag (x = 7..4)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF5</name>
<description>Stream x clear direct mode error
interrupt flag (x = 7..4)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF5</name>
<description>Stream x clear FIFO error interrupt flag
(x = 7..4)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCIF4</name>
<description>Stream x clear transfer complete
interrupt flag (x = 7..4)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHTIF4</name>
<description>Stream x clear half transfer interrupt
flag (x = 7..4)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTEIF4</name>
<description>Stream x clear transfer error interrupt
flag (x = 7..4)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CDMEIF4</name>
<description>Stream x clear direct mode error
interrupt flag (x = 7..4)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFEIF4</name>
<description>Stream x clear FIFO error interrupt flag
(x = 7..4)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S0CR</name>
<displayName>S0CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S0NDTR</name>
<displayName>S0NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S0PAR</name>
<displayName>S0PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S0M0AR</name>
<displayName>S0M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S0M1AR</name>
<displayName>S0M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S0FCR</name>
<displayName>S0FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S1CR</name>
<displayName>S1CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S1NDTR</name>
<displayName>S1NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S1PAR</name>
<displayName>S1PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S1M0AR</name>
<displayName>S1M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S1M1AR</name>
<displayName>S1M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S1FCR</name>
<displayName>S1FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S2CR</name>
<displayName>S2CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S2NDTR</name>
<displayName>S2NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S2PAR</name>
<displayName>S2PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S2M0AR</name>
<displayName>S2M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S2M1AR</name>
<displayName>S2M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S2FCR</name>
<displayName>S2FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S3CR</name>
<displayName>S3CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S3NDTR</name>
<displayName>S3NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S3PAR</name>
<displayName>S3PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S3M0AR</name>
<displayName>S3M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S3M1AR</name>
<displayName>S3M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S3FCR</name>
<displayName>S3FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S4CR</name>
<displayName>S4CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S4NDTR</name>
<displayName>S4NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S4PAR</name>
<displayName>S4PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0x78</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S4M0AR</name>
<displayName>S4M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S4M1AR</name>
<displayName>S4M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S4FCR</name>
<displayName>S4FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S5CR</name>
<displayName>S5CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S5NDTR</name>
<displayName>S5NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S5PAR</name>
<displayName>S5PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S5M0AR</name>
<displayName>S5M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S5M1AR</name>
<displayName>S5M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S5FCR</name>
<displayName>S5FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S6CR</name>
<displayName>S6CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S6NDTR</name>
<displayName>S6NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S6PAR</name>
<displayName>S6PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S6M0AR</name>
<displayName>S6M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S6M1AR</name>
<displayName>S6M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S6FCR</name>
<displayName>S6FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>S7CR</name>
<displayName>S7CR</displayName>
<description>stream x configuration
register</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MBURST</name>
<description>Memory burst transfer
configuration</description>
<bitOffset>23</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PBURST</name>
<description>Peripheral burst transfer
configuration</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACK</name>
<description>ACK</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CT</name>
<description>Current target (only in double buffer
mode)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBM</name>
<description>Double buffer mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PL</name>
<description>Priority level</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PINCOS</name>
<description>Peripheral increment offset
size</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSIZE</name>
<description>Memory data size</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PSIZE</name>
<description>Peripheral data size</description>
<bitOffset>11</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MINC</name>
<description>Memory increment mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINC</name>
<description>Peripheral increment mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CIRC</name>
<description>Circular mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Data transfer direction</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PFCTRL</name>
<description>Peripheral flow controller</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transfer complete interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HTIE</name>
<description>Half transfer interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEIE</name>
<description>Transfer error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMEIE</name>
<description>Direct mode error interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Stream enable / flag stream ready when
read low</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>S7NDTR</name>
<displayName>S7NDTR</displayName>
<description>stream x number of data
register</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NDT</name>
<description>Number of data items to
transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>S7PAR</name>
<displayName>S7PAR</displayName>
<description>stream x peripheral address
register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PA</name>
<description>Peripheral address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S7M0AR</name>
<displayName>S7M0AR</displayName>
<description>stream x memory 0 address
register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0A</name>
<description>Memory 0 address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S7M1AR</name>
<displayName>S7M1AR</displayName>
<description>stream x memory 1 address
register</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M1A</name>
<description>Memory 1 address (used in case of Double
buffer mode)</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>S7FCR</name>
<displayName>S7FCR</displayName>
<description>stream x FIFO control register</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<resetValue>0x00000021</resetValue>
<fields>
<field>
<name>FEIE</name>
<description>FIFO error interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FS</name>
<description>FIFO status</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMDIS</name>
<description>Direct mode disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FTH</name>
<description>FIFO threshold selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="DMA1">
<name>DMA2</name>
<baseAddress>0x40020400</baseAddress>
<interrupt>
<name>DMA_STR2</name>
<description>DMA1 Stream2</description>
<value>13</value>
</interrupt>
<interrupt>
<name>DMA_STR3</name>
<description>DMA1 Stream3</description>
<value>14</value>
</interrupt>
<interrupt>
<name>DMA_STR4</name>
<description>DMA1 Stream4</description>
<value>15</value>
</interrupt>
<interrupt>
<name>DMA_STR5</name>
<description>DMA1 Stream5</description>
<value>16</value>
</interrupt>
<interrupt>
<name>DMA_STR6</name>
<description>DMA1 Stream6</description>
<value>17</value>
</interrupt>
<interrupt>
<name>DMA2_STR0</name>
<description>DMA2 Stream0 interrupt</description>
<value>56</value>
</interrupt>
<interrupt>
<name>DMA2_STR1</name>
<description>DMA2 Stream1 interrupt</description>
<value>57</value>
</interrupt>
<interrupt>
<name>DMA2_STR2</name>
<description>DMA2 Stream2 interrupt</description>
<value>58</value>
</interrupt>
<interrupt>
<name>DMA2_STR3</name>
<description>DMA2 Stream3 interrupt</description>
<value>59</value>
</interrupt>
<interrupt>
<name>DMA2_STR4</name>
<description>DMA2 Stream4 interrupt</description>
<value>60</value>
</interrupt>
<interrupt>
<name>DMA2_STR5</name>
<description>DMA2 Stream5 interrupt</description>
<value>68</value>
</interrupt>
<interrupt>
<name>DMA2_STR6</name>
<description>DMA2 Stream6 interrupt</description>
<value>69</value>
</interrupt>
<interrupt>
<name>DMA2_STR7</name>
<description>DMA2 Stream7 interrupt</description>
<value>70</value>
</interrupt>
</peripheral>
<peripheral>
<name>HRTIM_Master</name>
<description>High Resolution Timer: Master
Timers</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MCR</name>
<displayName>MCR</displayName>
<description>Master Timer Control Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BRSTDMA</name>
<description>Burst DMA Update</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MREPU</name>
<description>Master Timer Repetition
update</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PREEN</name>
<description>Preload enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACSYNC</name>
<description>AC Synchronization</description>
<bitOffset>25</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TECEN</name>
<description>Timer E counter enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCEN</name>
<description>Timer D counter enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCEN</name>
<description>Timer C counter enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCEN</name>
<description>Timer B counter enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACEN</name>
<description>Timer A counter enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEN</name>
<description>Master Counter enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNC_SRC</name>
<description>Synchronization source</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNC_OUT</name>
<description>Synchronization output</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCSTRTM</name>
<description>Synchronization Starts
Master</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCRSTM</name>
<description>Synchronization Resets
Master</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNC_IN</name>
<description>ynchronization input</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>HALF</name>
<description>Half mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RETRIG</name>
<description>Master Re-triggerable mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>Master Continuous mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CK_PSC</name>
<description>HRTIM Master Clock
prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>MISR</name>
<displayName>MISR</displayName>
<description>Master Timer Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MUPD</name>
<description>Master Update Interrupt
Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNC</name>
<description>Sync Input Interrupt Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MREP</name>
<description>Master Repetition Interrupt
Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP4</name>
<description>Master Compare 4 Interrupt
Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP3</name>
<description>Master Compare 3 Interrupt
Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP2</name>
<description>Master Compare 2 Interrupt
Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP1</name>
<description>Master Compare 1 Interrupt
Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MICR</name>
<displayName>MICR</displayName>
<description>Master Timer Interrupt Clear
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MUPDC</name>
<description>Master update Interrupt flag
clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCC</name>
<description>Sync Input Interrupt flag
clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MREPC</name>
<description>Repetition Interrupt flag
clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP4C</name>
<description>Master Compare 4 Interrupt flag
clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP3C</name>
<description>Master Compare 3 Interrupt flag
clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP2C</name>
<description>Master Compare 2 Interrupt flag
clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP1C</name>
<description>Master Compare 1 Interrupt flag
clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MDIER4</name>
<displayName>MDIER4</displayName>
<description>MDIER4</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MUPDDE</name>
<description>MUPDDE</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCDE</name>
<description>SYNCDE</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MREPDE</name>
<description>MREPDE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP4DE</name>
<description>MCMP4DE</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP3DE</name>
<description>MCMP3DE</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP2DE</name>
<description>MCMP2DE</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP1DE</name>
<description>MCMP1DE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUPDIE</name>
<description>MUPDIE</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCIE</name>
<description>SYNCIE</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MREPIE</name>
<description>MREPIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP4IE</name>
<description>MCMP4IE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP3IE</name>
<description>MCMP3IE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP2IE</name>
<description>MCMP2IE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP1IE</name>
<description>MCMP1IE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCNTR</name>
<displayName>MCNTR</displayName>
<description>Master Timer Counter Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCNT</name>
<description>Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MPER</name>
<displayName>MPER</displayName>
<description>Master Timer Period Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>MPER</name>
<description>Master Timer Period value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MREP</name>
<displayName>MREP</displayName>
<description>Master Timer Repetition
Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MREP</name>
<description>Master Timer Repetition counter
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCMP1R</name>
<displayName>MCMP1R</displayName>
<description>Master Timer Compare 1
Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCMP1</name>
<description>Master Timer Compare 1
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCMP2R</name>
<displayName>MCMP2R</displayName>
<description>Master Timer Compare 2
Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCMP2</name>
<description>Master Timer Compare 2
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCMP3R</name>
<displayName>MCMP3R</displayName>
<description>Master Timer Compare 3
Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCMP3</name>
<description>Master Timer Compare 3
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCMP4R</name>
<displayName>MCMP4R</displayName>
<description>Master Timer Compare 4
Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCMP4</name>
<description>Master Timer Compare 4
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HRTIM_TIMA</name>
<description>High Resolution Timer: TIMA</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017480</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HRTIM1_MST</name>
<description>HRTIM1 master timer interrupt</description>
<value>103</value>
</interrupt>
<interrupt>
<name>HRTIM1_FLT</name>
<description>HRTIM1 fault interrupt</description>
<value>109</value>
</interrupt>
<registers>
<register>
<name>TIMACR</name>
<displayName>TIMACR</displayName>
<description>Timerx Control Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDGAT</name>
<description>Update Gating</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PREEN</name>
<description>Preload enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACSYNC</name>
<description>AC Synchronization</description>
<bitOffset>25</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MSTU</name>
<description>Master Timer update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEU</name>
<description>TEU</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDU</name>
<description>TDU</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCU</name>
<description>TCU</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBU</name>
<description>TBU</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxRSTU</name>
<description>Timerx reset update</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxREPU</name>
<description>Timer x Repetition update</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DELCMP4</name>
<description>Delayed CMP4 mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DELCMP2</name>
<description>Delayed CMP2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCSTRTx</name>
<description>Synchronization Starts Timer
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCRSTx</name>
<description>Synchronization Resets Timer
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSHPLL</name>
<description>Push-Pull mode enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALF</name>
<description>Half mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RETRIG</name>
<description>Re-triggerable mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>Continuous mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CK_PSCx</name>
<description>HRTIM Timer x Clock
prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMAISR</name>
<displayName>TIMAISR</displayName>
<description>Timerx Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>O2STAT</name>
<description>Output 2 State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>O1STAT</name>
<description>Output 1 State</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPPSTAT</name>
<description>Idle Push Pull Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPPSTAT</name>
<description>Current Push Pull Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection Flag</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Reset Interrupt Flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2</name>
<description>Output 2 Reset Interrupt
Flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2</name>
<description>Output 2 Set Interrupt
Flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1</name>
<description>Output 1 Reset Interrupt
Flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx1</name>
<description>Output 1 Set Interrupt
Flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2</name>
<description>Capture2 Interrupt Flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1</name>
<description>Capture1 Interrupt Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPD</name>
<description>Update Interrupt Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REP</name>
<description>Repetition Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Compare 4 Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMAICR</name>
<displayName>TIMAICR</displayName>
<description>Timerx Interrupt Clear
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTC</name>
<description>Delayed Protection Flag
Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC</name>
<description>Reset Interrupt flag Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2C</name>
<description>Output 2 Reset flag Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET2xC</name>
<description>Output 2 Set flag Clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1C</name>
<description>Output 1 Reset flag Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xC</name>
<description>Output 1 Set flag Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2C</name>
<description>Capture2 Interrupt flag
Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1C</name>
<description>Capture1 Interrupt flag
Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDC</name>
<description>Update Interrupt flag
Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPC</name>
<description>Repetition Interrupt flag
Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4C</name>
<description>Compare 4 Interrupt flag
Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3C</name>
<description>Compare 3 Interrupt flag
Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2C</name>
<description>Compare 2 Interrupt flag
Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1C</name>
<description>Compare 1 Interrupt flag
Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMADIER5</name>
<displayName>TIMADIER5</displayName>
<description>TIMxDIER5</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTDE</name>
<description>DLYPRTDE</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTDE</name>
<description>RSTDE</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2DE</name>
<description>RSTx2DE</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2DE</name>
<description>SETx2DE</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1DE</name>
<description>RSTx1DE</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xDE</name>
<description>SET1xDE</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2DE</name>
<description>CPT2DE</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1DE</name>
<description>CPT1DE</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDDE</name>
<description>UPDDE</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPDE</name>
<description>REPDE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4DE</name>
<description>CMP4DE</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3DE</name>
<description>CMP3DE</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2DE</name>
<description>CMP2DE</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1DE</name>
<description>CMP1DE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRTIE</name>
<description>DLYPRTIE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTIE</name>
<description>RSTIE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2IE</name>
<description>RSTx2IE</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2IE</name>
<description>SETx2IE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1IE</name>
<description>RSTx1IE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xIE</name>
<description>SET1xIE</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2IE</name>
<description>CPT2IE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1IE</name>
<description>CPT1IE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDIE</name>
<description>UPDIE</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPIE</name>
<description>REPIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4IE</name>
<description>CMP4IE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3IE</name>
<description>CMP3IE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2IE</name>
<description>CMP2IE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1IE</name>
<description>CMP1IE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNTAR</name>
<displayName>CNTAR</displayName>
<description>Timerx Counter Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNTx</name>
<description>Timerx Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERAR</name>
<displayName>PERAR</displayName>
<description>Timerx Period Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>PERx</name>
<description>Timerx Period value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>REPAR</name>
<displayName>REPAR</displayName>
<description>Timerx Repetition Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition counter
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1AR</name>
<displayName>CMP1AR</displayName>
<description>Timerx Compare 1 Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1CAR</name>
<displayName>CMP1CAR</displayName>
<description>Timerx Compare 1 Compound
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition value (aliased from
HRTIM_REPx register)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP2AR</name>
<displayName>CMP2AR</displayName>
<description>Timerx Compare 2 Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP2x</name>
<description>Timerx Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP3AR</name>
<displayName>CMP3AR</displayName>
<description>Timerx Compare 3 Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP3x</name>
<description>Timerx Compare 3 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP4AR</name>
<displayName>CMP4AR</displayName>
<description>Timerx Compare 4 Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP4x</name>
<description>Timerx Compare 4 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1AR</name>
<displayName>CPT1AR</displayName>
<description>Timerx Capture 1 Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT1x</name>
<description>Timerx Capture 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2AR</name>
<displayName>CPT2AR</displayName>
<description>Timerx Capture 2 Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT2x</name>
<description>Timerx Capture 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DTAR</name>
<displayName>DTAR</displayName>
<description>Timerx Deadtime Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTFLKx</name>
<description>Deadtime Falling Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFSLKx</name>
<description>Deadtime Falling Sign Lock</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDTFx</name>
<description>Sign Deadtime Falling
value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFx</name>
<description>Deadtime Falling value</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DTRLKx</name>
<description>Deadtime Rising Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRSLKx</name>
<description>Deadtime Rising Sign Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTPRSC</name>
<description>Deadtime Prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SDTRx</name>
<description>Sign Deadtime Rising value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRx</name>
<description>Deadtime Rising value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETA1R</name>
<displayName>SETA1R</displayName>
<description>Timerx Output1 Set Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>Registers update (transfer preload to
active)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>Timer Event 9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>Timer Event 8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>Timer Event 7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>Timer Event 6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>Timer Event 5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>Timer Event 4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>Timer Event 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>Timer Event 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>Timer Event 1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master Compare 4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master Compare 3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master Compare 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master Compare 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master Period</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Timer A compare 3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Timer A compare 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Timer A Period</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>Timer A resynchronizaton</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>Software Set trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTA1R</name>
<displayName>RSTA1R</displayName>
<description>Timerx Output1 Reset Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETA2R</name>
<displayName>SETA2R</displayName>
<description>Timerx Output2 Set Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>SST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTA2R</name>
<displayName>RSTA2R</displayName>
<description>Timerx Output2 Reset Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFAR1</name>
<displayName>EEFAR1</displayName>
<description>Timerx External Event Filtering Register
1</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE5FLTR</name>
<description>External Event 5 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE5LTCH</name>
<description>External Event 5 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4FLTR</name>
<description>External Event 4 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE4LTCH</name>
<description>External Event 4 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3FLTR</name>
<description>External Event 3 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE3LTCH</name>
<description>External Event 3 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2FLTR</name>
<description>External Event 2 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE2LTCH</name>
<description>External Event 2 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1FLTR</name>
<description>External Event 1 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE1LTCH</name>
<description>External Event 1 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFAR2</name>
<displayName>EEFAR2</displayName>
<description>Timerx External Event Filtering Register
2</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10FLTR</name>
<description>External Event 10 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE10LTCH</name>
<description>External Event 10 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9FLTR</name>
<description>External Event 9 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE9LTCH</name>
<description>External Event 9 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8FLTR</name>
<description>External Event 8 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE8LTCH</name>
<description>External Event 8 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7FLTR</name>
<description>External Event 7 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE7LTCH</name>
<description>External Event 7 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6FLTR</name>
<description>External Event 6 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE6LTCH</name>
<description>External Event 6 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTAR</name>
<displayName>RSTAR</displayName>
<description>TimerA Reset Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMECMP4</name>
<description>Timer E Compare 4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP4</name>
<description>Timer D Compare 4</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP4</name>
<description>Timer C Compare 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP4</name>
<description>Timer B Compare 4</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master compare 4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master compare 3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master compare 2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master compare 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master timer Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4 reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2 reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDT</name>
<description>Timer A Update reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHPAR</name>
<displayName>CHPAR</displayName>
<description>Timerx Chopper Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STRTPW</name>
<description>STRTPW</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CHPDTY</name>
<description>Timerx chopper duty cycle
value</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CHPFRQ</name>
<description>Timerx carrier frequency
value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1ACR</name>
<displayName>CPT1ACR</displayName>
<description>Timerx Capture 2 Control
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2ACR</name>
<displayName>CPT2ACR</displayName>
<description>CPT2xCR</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTAR</name>
<displayName>OUTAR</displayName>
<description>Timerx Output Register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIDL2</name>
<description>Output 2 Deadtime upon burst mode Idle
entry</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP2</name>
<description>Output 2 Chopper enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT2</name>
<description>Output 2 Fault state</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES2</name>
<description>Output 2 Idle State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM2</name>
<description>Output 2 Idle mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Output 2 polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYPRTEN</name>
<description>Delayed Protection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTEN</name>
<description>Deadtime enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIDL1</name>
<description>Output 1 Deadtime upon burst mode Idle
entry</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP1</name>
<description>Output 1 Chopper enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Output 1 Fault state</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES1</name>
<description>Output 1 Idle State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM1</name>
<description>Output 1 Idle mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Output 1 polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTAR</name>
<displayName>FLTAR</displayName>
<description>Timerx Fault Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTLCK</name>
<description>Fault sources Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5EN</name>
<description>Fault 5 enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4EN</name>
<description>Fault 4 enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3EN</name>
<description>Fault 3 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2EN</name>
<description>Fault 2 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1EN</name>
<description>Fault 1 enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HRTIM_TIMB</name>
<description>High Resolution Timer: TIMB</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017500</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HRTIM1_TIMA</name>
<description>HRTIM1 timer A interrupt</description>
<value>104</value>
</interrupt>
<registers>
<register>
<name>TIMBCR</name>
<displayName>TIMBCR</displayName>
<description>Timerx Control Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDGAT</name>
<description>Update Gating</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PREEN</name>
<description>Preload enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACSYNC</name>
<description>AC Synchronization</description>
<bitOffset>25</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MSTU</name>
<description>Master Timer update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEU</name>
<description>TEU</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDU</name>
<description>TDU</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCU</name>
<description>TCU</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBU</name>
<description>TBU</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxRSTU</name>
<description>Timerx reset update</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxREPU</name>
<description>Timer x Repetition update</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DELCMP4</name>
<description>Delayed CMP4 mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DELCMP2</name>
<description>Delayed CMP2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCSTRTx</name>
<description>Synchronization Starts Timer
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCRSTx</name>
<description>Synchronization Resets Timer
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSHPLL</name>
<description>Push-Pull mode enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALF</name>
<description>Half mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RETRIG</name>
<description>Re-triggerable mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>Continuous mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CK_PSCx</name>
<description>HRTIM Timer x Clock
prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMBISR</name>
<displayName>TIMBISR</displayName>
<description>Timerx Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>O2STAT</name>
<description>Output 2 State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>O1STAT</name>
<description>Output 1 State</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPPSTAT</name>
<description>Idle Push Pull Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPPSTAT</name>
<description>Current Push Pull Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection Flag</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Reset Interrupt Flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2</name>
<description>Output 2 Reset Interrupt
Flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2</name>
<description>Output 2 Set Interrupt
Flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1</name>
<description>Output 1 Reset Interrupt
Flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx1</name>
<description>Output 1 Set Interrupt
Flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2</name>
<description>Capture2 Interrupt Flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1</name>
<description>Capture1 Interrupt Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPD</name>
<description>Update Interrupt Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REP</name>
<description>Repetition Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Compare 4 Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMBICR</name>
<displayName>TIMBICR</displayName>
<description>Timerx Interrupt Clear
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTC</name>
<description>Delayed Protection Flag
Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC</name>
<description>Reset Interrupt flag Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2C</name>
<description>Output 2 Reset flag Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET2xC</name>
<description>Output 2 Set flag Clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1C</name>
<description>Output 1 Reset flag Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xC</name>
<description>Output 1 Set flag Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2C</name>
<description>Capture2 Interrupt flag
Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1C</name>
<description>Capture1 Interrupt flag
Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDC</name>
<description>Update Interrupt flag
Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPC</name>
<description>Repetition Interrupt flag
Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4C</name>
<description>Compare 4 Interrupt flag
Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3C</name>
<description>Compare 3 Interrupt flag
Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2C</name>
<description>Compare 2 Interrupt flag
Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1C</name>
<description>Compare 1 Interrupt flag
Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMBDIER5</name>
<displayName>TIMBDIER5</displayName>
<description>TIMxDIER5</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTDE</name>
<description>DLYPRTDE</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTDE</name>
<description>RSTDE</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2DE</name>
<description>RSTx2DE</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2DE</name>
<description>SETx2DE</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1DE</name>
<description>RSTx1DE</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xDE</name>
<description>SET1xDE</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2DE</name>
<description>CPT2DE</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1DE</name>
<description>CPT1DE</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDDE</name>
<description>UPDDE</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPDE</name>
<description>REPDE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4DE</name>
<description>CMP4DE</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3DE</name>
<description>CMP3DE</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2DE</name>
<description>CMP2DE</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1DE</name>
<description>CMP1DE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRTIE</name>
<description>DLYPRTIE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTIE</name>
<description>RSTIE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2IE</name>
<description>RSTx2IE</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2IE</name>
<description>SETx2IE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1IE</name>
<description>RSTx1IE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xIE</name>
<description>SET1xIE</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2IE</name>
<description>CPT2IE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1IE</name>
<description>CPT1IE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDIE</name>
<description>UPDIE</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPIE</name>
<description>REPIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4IE</name>
<description>CMP4IE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3IE</name>
<description>CMP3IE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2IE</name>
<description>CMP2IE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1IE</name>
<description>CMP1IE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNTR</name>
<displayName>CNTR</displayName>
<description>Timerx Counter Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNTx</name>
<description>Timerx Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBR</name>
<displayName>PERBR</displayName>
<description>Timerx Period Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>PERx</name>
<description>Timerx Period value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>REPBR</name>
<displayName>REPBR</displayName>
<description>Timerx Repetition Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition counter
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1BR</name>
<displayName>CMP1BR</displayName>
<description>Timerx Compare 1 Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1CBR</name>
<displayName>CMP1CBR</displayName>
<description>Timerx Compare 1 Compound
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition value (aliased from
HRTIM_REPx register)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP2BR</name>
<displayName>CMP2BR</displayName>
<description>Timerx Compare 2 Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP2x</name>
<description>Timerx Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP3BR</name>
<displayName>CMP3BR</displayName>
<description>Timerx Compare 3 Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP3x</name>
<description>Timerx Compare 3 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP4BR</name>
<displayName>CMP4BR</displayName>
<description>Timerx Compare 4 Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP4x</name>
<description>Timerx Compare 4 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1BR</name>
<displayName>CPT1BR</displayName>
<description>Timerx Capture 1 Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT1x</name>
<description>Timerx Capture 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2BR</name>
<displayName>CPT2BR</displayName>
<description>Timerx Capture 2 Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT2x</name>
<description>Timerx Capture 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DTBR</name>
<displayName>DTBR</displayName>
<description>Timerx Deadtime Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTFLKx</name>
<description>Deadtime Falling Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFSLKx</name>
<description>Deadtime Falling Sign Lock</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDTFx</name>
<description>Sign Deadtime Falling
value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFx</name>
<description>Deadtime Falling value</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DTRLKx</name>
<description>Deadtime Rising Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRSLKx</name>
<description>Deadtime Rising Sign Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTPRSC</name>
<description>Deadtime Prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SDTRx</name>
<description>Sign Deadtime Rising value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRx</name>
<description>Deadtime Rising value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETB1R</name>
<displayName>SETB1R</displayName>
<description>Timerx Output1 Set Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>Registers update (transfer preload to
active)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>Timer Event 9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>Timer Event 8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>Timer Event 7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>Timer Event 6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>Timer Event 5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>Timer Event 4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>Timer Event 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>Timer Event 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>Timer Event 1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master Compare 4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master Compare 3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master Compare 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master Compare 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master Period</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Timer A compare 3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Timer A compare 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Timer A Period</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>Timer A resynchronizaton</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>Software Set trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTB1R</name>
<displayName>RSTB1R</displayName>
<description>Timerx Output1 Reset Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETB2R</name>
<displayName>SETB2R</displayName>
<description>Timerx Output2 Set Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>SST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTB2R</name>
<displayName>RSTB2R</displayName>
<description>Timerx Output2 Reset Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFBR1</name>
<displayName>EEFBR1</displayName>
<description>Timerx External Event Filtering Register
1</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE5FLTR</name>
<description>External Event 5 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE5LTCH</name>
<description>External Event 5 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4FLTR</name>
<description>External Event 4 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE4LTCH</name>
<description>External Event 4 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3FLTR</name>
<description>External Event 3 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE3LTCH</name>
<description>External Event 3 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2FLTR</name>
<description>External Event 2 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE2LTCH</name>
<description>External Event 2 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1FLTR</name>
<description>External Event 1 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE1LTCH</name>
<description>External Event 1 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFBR2</name>
<displayName>EEFBR2</displayName>
<description>Timerx External Event Filtering Register
2</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10FLTR</name>
<description>External Event 10 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE10LTCH</name>
<description>External Event 10 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9FLTR</name>
<description>External Event 9 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE9LTCH</name>
<description>External Event 9 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8FLTR</name>
<description>External Event 8 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE8LTCH</name>
<description>External Event 8 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7FLTR</name>
<description>External Event 7 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE7LTCH</name>
<description>External Event 7 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6FLTR</name>
<description>External Event 6 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE6LTCH</name>
<description>External Event 6 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTBR</name>
<displayName>RSTBR</displayName>
<description>TimerA Reset Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMECMP4</name>
<description>Timer E Compare 4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP4</name>
<description>Timer D Compare 4</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP4</name>
<description>Timer C Compare 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP4</name>
<description>Timer A Compare 4</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master compare 4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master compare 3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master compare 2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master compare 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master timer Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4 reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2 reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDT</name>
<description>Timer A Update reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHPBR</name>
<displayName>CHPBR</displayName>
<description>Timerx Chopper Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STRTPW</name>
<description>STRTPW</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CHPDTY</name>
<description>Timerx chopper duty cycle
value</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CHPFRQ</name>
<description>Timerx carrier frequency
value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1BCR</name>
<displayName>CPT1BCR</displayName>
<description>Timerx Capture 2 Control
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2BCR</name>
<displayName>CPT2BCR</displayName>
<description>CPT2xCR</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTBR</name>
<displayName>OUTBR</displayName>
<description>Timerx Output Register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIDL2</name>
<description>Output 2 Deadtime upon burst mode Idle
entry</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP2</name>
<description>Output 2 Chopper enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT2</name>
<description>Output 2 Fault state</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES2</name>
<description>Output 2 Idle State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM2</name>
<description>Output 2 Idle mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Output 2 polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYPRTEN</name>
<description>Delayed Protection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTEN</name>
<description>Deadtime enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIDL1</name>
<description>Output 1 Deadtime upon burst mode Idle
entry</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP1</name>
<description>Output 1 Chopper enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Output 1 Fault state</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES1</name>
<description>Output 1 Idle State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM1</name>
<description>Output 1 Idle mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Output 1 polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTBR</name>
<displayName>FLTBR</displayName>
<description>Timerx Fault Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTLCK</name>
<description>Fault sources Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5EN</name>
<description>Fault 5 enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4EN</name>
<description>Fault 4 enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3EN</name>
<description>Fault 3 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2EN</name>
<description>Fault 2 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1EN</name>
<description>Fault 1 enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HRTIM_TIMC</name>
<description>High Resolution Timer: TIMC</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017580</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HRTIM_TIMB</name>
<description>HRTIM1 timer B interrupt</description>
<value>105</value>
</interrupt>
<registers>
<register>
<name>TIMCCR</name>
<displayName>TIMCCR</displayName>
<description>Timerx Control Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDGAT</name>
<description>Update Gating</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PREEN</name>
<description>Preload enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACSYNC</name>
<description>AC Synchronization</description>
<bitOffset>25</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MSTU</name>
<description>Master Timer update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEU</name>
<description>TEU</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDU</name>
<description>TDU</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCU</name>
<description>TCU</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBU</name>
<description>TBU</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxRSTU</name>
<description>Timerx reset update</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxREPU</name>
<description>Timer x Repetition update</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DELCMP4</name>
<description>Delayed CMP4 mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DELCMP2</name>
<description>Delayed CMP2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCSTRTx</name>
<description>Synchronization Starts Timer
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCRSTx</name>
<description>Synchronization Resets Timer
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSHPLL</name>
<description>Push-Pull mode enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALF</name>
<description>Half mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RETRIG</name>
<description>Re-triggerable mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>Continuous mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CK_PSCx</name>
<description>HRTIM Timer x Clock
prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMCISR</name>
<displayName>TIMCISR</displayName>
<description>Timerx Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>O2STAT</name>
<description>Output 2 State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>O1STAT</name>
<description>Output 1 State</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPPSTAT</name>
<description>Idle Push Pull Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPPSTAT</name>
<description>Current Push Pull Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection Flag</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Reset Interrupt Flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2</name>
<description>Output 2 Reset Interrupt
Flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2</name>
<description>Output 2 Set Interrupt
Flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1</name>
<description>Output 1 Reset Interrupt
Flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx1</name>
<description>Output 1 Set Interrupt
Flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2</name>
<description>Capture2 Interrupt Flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1</name>
<description>Capture1 Interrupt Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPD</name>
<description>Update Interrupt Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REP</name>
<description>Repetition Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Compare 4 Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMCICR</name>
<displayName>TIMCICR</displayName>
<description>Timerx Interrupt Clear
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTC</name>
<description>Delayed Protection Flag
Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC</name>
<description>Reset Interrupt flag Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2C</name>
<description>Output 2 Reset flag Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET2xC</name>
<description>Output 2 Set flag Clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1C</name>
<description>Output 1 Reset flag Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xC</name>
<description>Output 1 Set flag Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2C</name>
<description>Capture2 Interrupt flag
Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1C</name>
<description>Capture1 Interrupt flag
Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDC</name>
<description>Update Interrupt flag
Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPC</name>
<description>Repetition Interrupt flag
Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4C</name>
<description>Compare 4 Interrupt flag
Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3C</name>
<description>Compare 3 Interrupt flag
Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2C</name>
<description>Compare 2 Interrupt flag
Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1C</name>
<description>Compare 1 Interrupt flag
Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMCDIER5</name>
<displayName>TIMCDIER5</displayName>
<description>TIMxDIER5</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTDE</name>
<description>DLYPRTDE</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTDE</name>
<description>RSTDE</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2DE</name>
<description>RSTx2DE</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2DE</name>
<description>SETx2DE</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1DE</name>
<description>RSTx1DE</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xDE</name>
<description>SET1xDE</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2DE</name>
<description>CPT2DE</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1DE</name>
<description>CPT1DE</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDDE</name>
<description>UPDDE</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPDE</name>
<description>REPDE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4DE</name>
<description>CMP4DE</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3DE</name>
<description>CMP3DE</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2DE</name>
<description>CMP2DE</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1DE</name>
<description>CMP1DE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRTIE</name>
<description>DLYPRTIE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTIE</name>
<description>RSTIE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2IE</name>
<description>RSTx2IE</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2IE</name>
<description>SETx2IE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1IE</name>
<description>RSTx1IE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xIE</name>
<description>SET1xIE</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2IE</name>
<description>CPT2IE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1IE</name>
<description>CPT1IE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDIE</name>
<description>UPDIE</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPIE</name>
<description>REPIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4IE</name>
<description>CMP4IE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3IE</name>
<description>CMP3IE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2IE</name>
<description>CMP2IE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1IE</name>
<description>CMP1IE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNTCR</name>
<displayName>CNTCR</displayName>
<description>Timerx Counter Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNTx</name>
<description>Timerx Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERCR</name>
<displayName>PERCR</displayName>
<description>Timerx Period Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>PERx</name>
<description>Timerx Period value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>REPCR</name>
<displayName>REPCR</displayName>
<description>Timerx Repetition Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition counter
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1CR</name>
<displayName>CMP1CR</displayName>
<description>Timerx Compare 1 Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1CCR</name>
<displayName>CMP1CCR</displayName>
<description>Timerx Compare 1 Compound
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition value (aliased from
HRTIM_REPx register)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP2CR</name>
<displayName>CMP2CR</displayName>
<description>Timerx Compare 2 Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP2x</name>
<description>Timerx Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP3CR</name>
<displayName>CMP3CR</displayName>
<description>Timerx Compare 3 Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP3x</name>
<description>Timerx Compare 3 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP4CR</name>
<displayName>CMP4CR</displayName>
<description>Timerx Compare 4 Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP4x</name>
<description>Timerx Compare 4 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1CR</name>
<displayName>CPT1CR</displayName>
<description>Timerx Capture 1 Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT1x</name>
<description>Timerx Capture 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2CR</name>
<displayName>CPT2CR</displayName>
<description>Timerx Capture 2 Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT2x</name>
<description>Timerx Capture 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DTCR</name>
<displayName>DTCR</displayName>
<description>Timerx Deadtime Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTFLKx</name>
<description>Deadtime Falling Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFSLKx</name>
<description>Deadtime Falling Sign Lock</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDTFx</name>
<description>Sign Deadtime Falling
value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFx</name>
<description>Deadtime Falling value</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DTRLKx</name>
<description>Deadtime Rising Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRSLKx</name>
<description>Deadtime Rising Sign Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTPRSC</name>
<description>Deadtime Prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SDTRx</name>
<description>Sign Deadtime Rising value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRx</name>
<description>Deadtime Rising value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETC1R</name>
<displayName>SETC1R</displayName>
<description>Timerx Output1 Set Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>Registers update (transfer preload to
active)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>Timer Event 9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>Timer Event 8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>Timer Event 7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>Timer Event 6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>Timer Event 5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>Timer Event 4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>Timer Event 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>Timer Event 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>Timer Event 1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master Compare 4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master Compare 3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master Compare 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master Compare 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master Period</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Timer A compare 3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Timer A compare 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Timer A Period</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>Timer A resynchronizaton</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>Software Set trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTC1R</name>
<displayName>RSTC1R</displayName>
<description>Timerx Output1 Reset Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETC2R</name>
<displayName>SETC2R</displayName>
<description>Timerx Output2 Set Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>SST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTC2R</name>
<displayName>RSTC2R</displayName>
<description>Timerx Output2 Reset Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFCR1</name>
<displayName>EEFCR1</displayName>
<description>Timerx External Event Filtering Register
1</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE5FLTR</name>
<description>External Event 5 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE5LTCH</name>
<description>External Event 5 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4FLTR</name>
<description>External Event 4 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE4LTCH</name>
<description>External Event 4 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3FLTR</name>
<description>External Event 3 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE3LTCH</name>
<description>External Event 3 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2FLTR</name>
<description>External Event 2 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE2LTCH</name>
<description>External Event 2 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1FLTR</name>
<description>External Event 1 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE1LTCH</name>
<description>External Event 1 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFCR2</name>
<displayName>EEFCR2</displayName>
<description>Timerx External Event Filtering Register
2</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10FLTR</name>
<description>External Event 10 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE10LTCH</name>
<description>External Event 10 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9FLTR</name>
<description>External Event 9 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE9LTCH</name>
<description>External Event 9 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8FLTR</name>
<description>External Event 8 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE8LTCH</name>
<description>External Event 8 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7FLTR</name>
<description>External Event 7 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE7LTCH</name>
<description>External Event 7 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6FLTR</name>
<description>External Event 6 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE6LTCH</name>
<description>External Event 6 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTCR</name>
<displayName>RSTCR</displayName>
<description>TimerA Reset Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMECMP4</name>
<description>Timer E Compare 4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP4</name>
<description>Timer D Compare 4</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP4</name>
<description>Timer B Compare 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP4</name>
<description>Timer A Compare 4</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master compare 4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master compare 3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master compare 2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master compare 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master timer Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4 reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2 reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDT</name>
<description>Timer A Update reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHPCR</name>
<displayName>CHPCR</displayName>
<description>Timerx Chopper Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STRTPW</name>
<description>STRTPW</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CHPDTY</name>
<description>Timerx chopper duty cycle
value</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CHPFRQ</name>
<description>Timerx carrier frequency
value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1CCR</name>
<displayName>CPT1CCR</displayName>
<description>Timerx Capture 2 Control
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2CCR</name>
<displayName>CPT2CCR</displayName>
<description>CPT2xCR</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTCR</name>
<displayName>OUTCR</displayName>
<description>Timerx Output Register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIDL2</name>
<description>Output 2 Deadtime upon burst mode Idle
entry</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP2</name>
<description>Output 2 Chopper enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT2</name>
<description>Output 2 Fault state</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES2</name>
<description>Output 2 Idle State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM2</name>
<description>Output 2 Idle mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Output 2 polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYPRTEN</name>
<description>Delayed Protection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTEN</name>
<description>Deadtime enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIDL1</name>
<description>Output 1 Deadtime upon burst mode Idle
entry</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP1</name>
<description>Output 1 Chopper enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Output 1 Fault state</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES1</name>
<description>Output 1 Idle State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM1</name>
<description>Output 1 Idle mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Output 1 polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTCR</name>
<displayName>FLTCR</displayName>
<description>Timerx Fault Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTLCK</name>
<description>Fault sources Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5EN</name>
<description>Fault 5 enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4EN</name>
<description>Fault 4 enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3EN</name>
<description>Fault 3 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2EN</name>
<description>Fault 2 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1EN</name>
<description>Fault 1 enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HRTIM_TIMD</name>
<description>High Resolution Timer: TIMD</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017600</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HRTIM1_TIMC</name>
<description>HRTIM1 timer C interrupt</description>
<value>106</value>
</interrupt>
<registers>
<register>
<name>TIMDCR</name>
<displayName>TIMDCR</displayName>
<description>Timerx Control Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDGAT</name>
<description>Update Gating</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PREEN</name>
<description>Preload enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACSYNC</name>
<description>AC Synchronization</description>
<bitOffset>25</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MSTU</name>
<description>Master Timer update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEU</name>
<description>TEU</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDU</name>
<description>TDU</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCU</name>
<description>TCU</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBU</name>
<description>TBU</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxRSTU</name>
<description>Timerx reset update</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxREPU</name>
<description>Timer x Repetition update</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DELCMP4</name>
<description>Delayed CMP4 mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DELCMP2</name>
<description>Delayed CMP2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCSTRTx</name>
<description>Synchronization Starts Timer
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCRSTx</name>
<description>Synchronization Resets Timer
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSHPLL</name>
<description>Push-Pull mode enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALF</name>
<description>Half mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RETRIG</name>
<description>Re-triggerable mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>Continuous mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CK_PSCx</name>
<description>HRTIM Timer x Clock
prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMDISR</name>
<displayName>TIMDISR</displayName>
<description>Timerx Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>O2STAT</name>
<description>Output 2 State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>O1STAT</name>
<description>Output 1 State</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPPSTAT</name>
<description>Idle Push Pull Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPPSTAT</name>
<description>Current Push Pull Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection Flag</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Reset Interrupt Flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2</name>
<description>Output 2 Reset Interrupt
Flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2</name>
<description>Output 2 Set Interrupt
Flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1</name>
<description>Output 1 Reset Interrupt
Flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx1</name>
<description>Output 1 Set Interrupt
Flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2</name>
<description>Capture2 Interrupt Flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1</name>
<description>Capture1 Interrupt Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPD</name>
<description>Update Interrupt Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REP</name>
<description>Repetition Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Compare 4 Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMDICR</name>
<displayName>TIMDICR</displayName>
<description>Timerx Interrupt Clear
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTC</name>
<description>Delayed Protection Flag
Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC</name>
<description>Reset Interrupt flag Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2C</name>
<description>Output 2 Reset flag Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET2xC</name>
<description>Output 2 Set flag Clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1C</name>
<description>Output 1 Reset flag Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xC</name>
<description>Output 1 Set flag Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2C</name>
<description>Capture2 Interrupt flag
Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1C</name>
<description>Capture1 Interrupt flag
Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDC</name>
<description>Update Interrupt flag
Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPC</name>
<description>Repetition Interrupt flag
Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4C</name>
<description>Compare 4 Interrupt flag
Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3C</name>
<description>Compare 3 Interrupt flag
Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2C</name>
<description>Compare 2 Interrupt flag
Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1C</name>
<description>Compare 1 Interrupt flag
Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMDDIER5</name>
<displayName>TIMDDIER5</displayName>
<description>TIMxDIER5</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTDE</name>
<description>DLYPRTDE</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTDE</name>
<description>RSTDE</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2DE</name>
<description>RSTx2DE</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2DE</name>
<description>SETx2DE</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1DE</name>
<description>RSTx1DE</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xDE</name>
<description>SET1xDE</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2DE</name>
<description>CPT2DE</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1DE</name>
<description>CPT1DE</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDDE</name>
<description>UPDDE</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPDE</name>
<description>REPDE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4DE</name>
<description>CMP4DE</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3DE</name>
<description>CMP3DE</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2DE</name>
<description>CMP2DE</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1DE</name>
<description>CMP1DE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRTIE</name>
<description>DLYPRTIE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTIE</name>
<description>RSTIE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2IE</name>
<description>RSTx2IE</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2IE</name>
<description>SETx2IE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1IE</name>
<description>RSTx1IE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xIE</name>
<description>SET1xIE</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2IE</name>
<description>CPT2IE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1IE</name>
<description>CPT1IE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDIE</name>
<description>UPDIE</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPIE</name>
<description>REPIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4IE</name>
<description>CMP4IE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3IE</name>
<description>CMP3IE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2IE</name>
<description>CMP2IE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1IE</name>
<description>CMP1IE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNTDR</name>
<displayName>CNTDR</displayName>
<description>Timerx Counter Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNTx</name>
<description>Timerx Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERDR</name>
<displayName>PERDR</displayName>
<description>Timerx Period Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>PERx</name>
<description>Timerx Period value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>REPDR</name>
<displayName>REPDR</displayName>
<description>Timerx Repetition Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition counter
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1DR</name>
<displayName>CMP1DR</displayName>
<description>Timerx Compare 1 Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1CDR</name>
<displayName>CMP1CDR</displayName>
<description>Timerx Compare 1 Compound
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition value (aliased from
HRTIM_REPx register)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP2DR</name>
<displayName>CMP2DR</displayName>
<description>Timerx Compare 2 Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP2x</name>
<description>Timerx Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP3DR</name>
<displayName>CMP3DR</displayName>
<description>Timerx Compare 3 Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP3x</name>
<description>Timerx Compare 3 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP4DR</name>
<displayName>CMP4DR</displayName>
<description>Timerx Compare 4 Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP4x</name>
<description>Timerx Compare 4 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1DR</name>
<displayName>CPT1DR</displayName>
<description>Timerx Capture 1 Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT1x</name>
<description>Timerx Capture 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2DR</name>
<displayName>CPT2DR</displayName>
<description>Timerx Capture 2 Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT2x</name>
<description>Timerx Capture 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DTDR</name>
<displayName>DTDR</displayName>
<description>Timerx Deadtime Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTFLKx</name>
<description>Deadtime Falling Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFSLKx</name>
<description>Deadtime Falling Sign Lock</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDTFx</name>
<description>Sign Deadtime Falling
value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFx</name>
<description>Deadtime Falling value</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DTRLKx</name>
<description>Deadtime Rising Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRSLKx</name>
<description>Deadtime Rising Sign Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTPRSC</name>
<description>Deadtime Prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SDTRx</name>
<description>Sign Deadtime Rising value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRx</name>
<description>Deadtime Rising value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETD1R</name>
<displayName>SETD1R</displayName>
<description>Timerx Output1 Set Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>Registers update (transfer preload to
active)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>Timer Event 9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>Timer Event 8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>Timer Event 7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>Timer Event 6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>Timer Event 5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>Timer Event 4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>Timer Event 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>Timer Event 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>Timer Event 1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master Compare 4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master Compare 3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master Compare 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master Compare 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master Period</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Timer A compare 3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Timer A compare 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Timer A Period</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>Timer A resynchronizaton</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>Software Set trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTD1R</name>
<displayName>RSTD1R</displayName>
<description>Timerx Output1 Reset Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETD2R</name>
<displayName>SETD2R</displayName>
<description>Timerx Output2 Set Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>SST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTD2R</name>
<displayName>RSTD2R</displayName>
<description>Timerx Output2 Reset Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFDR1</name>
<displayName>EEFDR1</displayName>
<description>Timerx External Event Filtering Register
1</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE5FLTR</name>
<description>External Event 5 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE5LTCH</name>
<description>External Event 5 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4FLTR</name>
<description>External Event 4 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE4LTCH</name>
<description>External Event 4 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3FLTR</name>
<description>External Event 3 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE3LTCH</name>
<description>External Event 3 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2FLTR</name>
<description>External Event 2 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE2LTCH</name>
<description>External Event 2 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1FLTR</name>
<description>External Event 1 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE1LTCH</name>
<description>External Event 1 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFDR2</name>
<displayName>EEFDR2</displayName>
<description>Timerx External Event Filtering Register
2</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10FLTR</name>
<description>External Event 10 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE10LTCH</name>
<description>External Event 10 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9FLTR</name>
<description>External Event 9 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE9LTCH</name>
<description>External Event 9 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8FLTR</name>
<description>External Event 8 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE8LTCH</name>
<description>External Event 8 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7FLTR</name>
<description>External Event 7 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE7LTCH</name>
<description>External Event 7 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6FLTR</name>
<description>External Event 6 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE6LTCH</name>
<description>External Event 6 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTDR</name>
<displayName>RSTDR</displayName>
<description>TimerA Reset Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMECMP4</name>
<description>Timer E Compare 4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP4</name>
<description>Timer C Compare 4</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP4</name>
<description>Timer B Compare 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP4</name>
<description>Timer A Compare 4</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master compare 4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master compare 3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master compare 2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master compare 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master timer Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4 reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2 reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDT</name>
<description>Timer A Update reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHPDR</name>
<displayName>CHPDR</displayName>
<description>Timerx Chopper Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STRTPW</name>
<description>STRTPW</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CHPDTY</name>
<description>Timerx chopper duty cycle
value</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CHPFRQ</name>
<description>Timerx carrier frequency
value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1DCR</name>
<displayName>CPT1DCR</displayName>
<description>Timerx Capture 2 Control
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2DCR</name>
<displayName>CPT2DCR</displayName>
<description>CPT2xCR</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TECMP2</name>
<description>Timer E Compare 2</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>Timer E Compare 1</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1RST</name>
<description>Timer E output 1 Reset</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1SET</name>
<description>Timer E output 1 Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTDR</name>
<displayName>OUTDR</displayName>
<description>Timerx Output Register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIDL2</name>
<description>Output 2 Deadtime upon burst mode Idle
entry</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP2</name>
<description>Output 2 Chopper enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT2</name>
<description>Output 2 Fault state</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES2</name>
<description>Output 2 Idle State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM2</name>
<description>Output 2 Idle mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Output 2 polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYPRTEN</name>
<description>Delayed Protection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTEN</name>
<description>Deadtime enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIDL1</name>
<description>Output 1 Deadtime upon burst mode Idle
entry</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP1</name>
<description>Output 1 Chopper enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Output 1 Fault state</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES1</name>
<description>Output 1 Idle State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM1</name>
<description>Output 1 Idle mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Output 1 polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTDR</name>
<displayName>FLTDR</displayName>
<description>Timerx Fault Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTLCK</name>
<description>Fault sources Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5EN</name>
<description>Fault 5 enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4EN</name>
<description>Fault 4 enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3EN</name>
<description>Fault 3 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2EN</name>
<description>Fault 2 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1EN</name>
<description>Fault 1 enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HRTIM_TIME</name>
<description>High Resolution Timer: TIME</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017680</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HRTIM1_TIMD</name>
<description>HRTIM1 timer D interrupt</description>
<value>107</value>
</interrupt>
<registers>
<register>
<name>TIMECR</name>
<displayName>TIMECR</displayName>
<description>Timerx Control Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDGAT</name>
<description>Update Gating</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PREEN</name>
<description>Preload enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACSYNC</name>
<description>AC Synchronization</description>
<bitOffset>25</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MSTU</name>
<description>Master Timer update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEU</name>
<description>TEU</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDU</name>
<description>TDU</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCU</name>
<description>TCU</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBU</name>
<description>TBU</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxRSTU</name>
<description>Timerx reset update</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TxREPU</name>
<description>Timer x Repetition update</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DELCMP4</name>
<description>Delayed CMP4 mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DELCMP2</name>
<description>Delayed CMP2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYNCSTRTx</name>
<description>Synchronization Starts Timer
x</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCRSTx</name>
<description>Synchronization Resets Timer
x</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSHPLL</name>
<description>Push-Pull mode enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALF</name>
<description>Half mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RETRIG</name>
<description>Re-triggerable mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONT</name>
<description>Continuous mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CK_PSCx</name>
<description>HRTIM Timer x Clock
prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMEISR</name>
<displayName>TIMEISR</displayName>
<description>Timerx Interrupt Status
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>O2STAT</name>
<description>Output 2 State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>O1STAT</name>
<description>Output 1 State</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPPSTAT</name>
<description>Idle Push Pull Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPPSTAT</name>
<description>Current Push Pull Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection Flag</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Reset Interrupt Flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2</name>
<description>Output 2 Reset Interrupt
Flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2</name>
<description>Output 2 Set Interrupt
Flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1</name>
<description>Output 1 Reset Interrupt
Flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx1</name>
<description>Output 1 Set Interrupt
Flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2</name>
<description>Capture2 Interrupt Flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1</name>
<description>Capture1 Interrupt Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPD</name>
<description>Update Interrupt Flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REP</name>
<description>Repetition Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Compare 4 Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMEICR</name>
<displayName>TIMEICR</displayName>
<description>Timerx Interrupt Clear
Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTC</name>
<description>Delayed Protection Flag
Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC</name>
<description>Reset Interrupt flag Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2C</name>
<description>Output 2 Reset flag Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET2xC</name>
<description>Output 2 Set flag Clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1C</name>
<description>Output 1 Reset flag Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xC</name>
<description>Output 1 Set flag Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2C</name>
<description>Capture2 Interrupt flag
Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1C</name>
<description>Capture1 Interrupt flag
Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDC</name>
<description>Update Interrupt flag
Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPC</name>
<description>Repetition Interrupt flag
Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4C</name>
<description>Compare 4 Interrupt flag
Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3C</name>
<description>Compare 3 Interrupt flag
Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2C</name>
<description>Compare 2 Interrupt flag
Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1C</name>
<description>Compare 1 Interrupt flag
Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMEDIER5</name>
<displayName>TIMEDIER5</displayName>
<description>TIMxDIER5</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DLYPRTDE</name>
<description>DLYPRTDE</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTDE</name>
<description>RSTDE</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2DE</name>
<description>RSTx2DE</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2DE</name>
<description>SETx2DE</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1DE</name>
<description>RSTx1DE</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xDE</name>
<description>SET1xDE</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2DE</name>
<description>CPT2DE</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1DE</name>
<description>CPT1DE</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDDE</name>
<description>UPDDE</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPDE</name>
<description>REPDE</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4DE</name>
<description>CMP4DE</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3DE</name>
<description>CMP3DE</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2DE</name>
<description>CMP2DE</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1DE</name>
<description>CMP1DE</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRTIE</name>
<description>DLYPRTIE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTIE</name>
<description>RSTIE</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx2IE</name>
<description>RSTx2IE</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETx2IE</name>
<description>SETx2IE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTx1IE</name>
<description>RSTx1IE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SET1xIE</name>
<description>SET1xIE</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT2IE</name>
<description>CPT2IE</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPT1IE</name>
<description>CPT1IE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDIE</name>
<description>UPDIE</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REPIE</name>
<description>REPIE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4IE</name>
<description>CMP4IE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3IE</name>
<description>CMP3IE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2IE</name>
<description>CMP2IE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1IE</name>
<description>CMP1IE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNTER</name>
<displayName>CNTER</displayName>
<description>Timerx Counter Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNTx</name>
<description>Timerx Counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERER</name>
<displayName>PERER</displayName>
<description>Timerx Period Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000FFFF</resetValue>
<fields>
<field>
<name>PERx</name>
<description>Timerx Period value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>REPER</name>
<displayName>REPER</displayName>
<description>Timerx Repetition Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition counter
value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1ER</name>
<displayName>CMP1ER</displayName>
<description>Timerx Compare 1 Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP1CER</name>
<displayName>CMP1CER</displayName>
<description>Timerx Compare 1 Compound
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REPx</name>
<description>Timerx Repetition value (aliased from
HRTIM_REPx register)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CMP1x</name>
<description>Timerx Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP2ER</name>
<displayName>CMP2ER</displayName>
<description>Timerx Compare 2 Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP2x</name>
<description>Timerx Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP3ER</name>
<displayName>CMP3ER</displayName>
<description>Timerx Compare 3 Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP3x</name>
<description>Timerx Compare 3 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CMP4ER</name>
<displayName>CMP4ER</displayName>
<description>Timerx Compare 4 Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMP4x</name>
<description>Timerx Compare 4 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1ER</name>
<displayName>CPT1ER</displayName>
<description>Timerx Capture 1 Register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT1x</name>
<description>Timerx Capture 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2ER</name>
<displayName>CPT2ER</displayName>
<description>Timerx Capture 2 Register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPT2x</name>
<description>Timerx Capture 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DTER</name>
<displayName>DTER</displayName>
<description>Timerx Deadtime Register</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTFLKx</name>
<description>Deadtime Falling Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFSLKx</name>
<description>Deadtime Falling Sign Lock</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDTFx</name>
<description>Sign Deadtime Falling
value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTFx</name>
<description>Deadtime Falling value</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>DTRLKx</name>
<description>Deadtime Rising Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRSLKx</name>
<description>Deadtime Rising Sign Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTPRSC</name>
<description>Deadtime Prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SDTRx</name>
<description>Sign Deadtime Rising value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTRx</name>
<description>Deadtime Rising value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETE1R</name>
<displayName>SETE1R</displayName>
<description>Timerx Output1 Set Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>Registers update (transfer preload to
active)</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>Timer Event 9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>Timer Event 8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>Timer Event 7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>Timer Event 6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>Timer Event 5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>Timer Event 4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>Timer Event 3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>Timer Event 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>Timer Event 1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master Compare 4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master Compare 3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master Compare 2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master Compare 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master Period</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Timer A compare 3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Timer A compare 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Timer A Period</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>Timer A resynchronizaton</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>Software Set trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTE1R</name>
<displayName>RSTE1R</displayName>
<description>Timerx Output1 Reset Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SETE2R</name>
<displayName>SETE2R</displayName>
<description>Timerx Output2 Set Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SST</name>
<description>SST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTE2R</name>
<displayName>RSTE2R</displayName>
<description>Timerx Output2 Reset Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDATE</name>
<description>UPDATE</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>EXTEVNT10</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>EXTEVNT9</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>EXTEVNT8</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>EXTEVNT7</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>EXTEVNT6</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>EXTEVNT5</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>EXTEVNT4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>EXTEVNT3</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>EXTEVNT2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>EXTEVNT1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT9</name>
<description>TIMEVNT9</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT8</name>
<description>TIMEVNT8</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT7</name>
<description>TIMEVNT7</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT6</name>
<description>TIMEVNT6</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT5</name>
<description>TIMEVNT5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT4</name>
<description>TIMEVNT4</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT3</name>
<description>TIMEVNT3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT2</name>
<description>TIMEVNT2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMEVNT1</name>
<description>TIMEVNT1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>MSTPER</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>CMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>CMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>CMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>CMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESYNC</name>
<description>RESYNC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRT</name>
<description>SRT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFER1</name>
<displayName>EEFER1</displayName>
<description>Timerx External Event Filtering Register
1</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE5FLTR</name>
<description>External Event 5 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE5LTCH</name>
<description>External Event 5 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4FLTR</name>
<description>External Event 4 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE4LTCH</name>
<description>External Event 4 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3FLTR</name>
<description>External Event 3 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE3LTCH</name>
<description>External Event 3 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2FLTR</name>
<description>External Event 2 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE2LTCH</name>
<description>External Event 2 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1FLTR</name>
<description>External Event 1 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE1LTCH</name>
<description>External Event 1 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EEFER2</name>
<displayName>EEFER2</displayName>
<description>Timerx External Event Filtering Register
2</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10FLTR</name>
<description>External Event 10 filter</description>
<bitOffset>25</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE10LTCH</name>
<description>External Event 10 latch</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9FLTR</name>
<description>External Event 9 filter</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE9LTCH</name>
<description>External Event 9 latch</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8FLTR</name>
<description>External Event 8 filter</description>
<bitOffset>13</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE8LTCH</name>
<description>External Event 8 latch</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7FLTR</name>
<description>External Event 7 filter</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE7LTCH</name>
<description>External Event 7 latch</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6FLTR</name>
<description>External Event 6 filter</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EE6LTCH</name>
<description>External Event 6 latch</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RSTER</name>
<displayName>RSTER</displayName>
<description>TimerA Reset Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMDCMP4</name>
<description>Timer D Compare 4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP4</name>
<description>Timer C Compare 4</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP4</name>
<description>Timer B Compare 4</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP4</name>
<description>Timer A Compare 4</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT10</name>
<description>External Event 10</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT9</name>
<description>External Event 9</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT8</name>
<description>External Event 8</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT7</name>
<description>External Event 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT6</name>
<description>External Event 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT5</name>
<description>External Event 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT4</name>
<description>External Event 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT3</name>
<description>External Event 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT2</name>
<description>External Event 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTEVNT1</name>
<description>External Event 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>Master compare 4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>Master compare 3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>Master compare 2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>Master compare 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTPER</name>
<description>Master timer Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Timer A compare 4 reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Timer A compare 2 reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPDT</name>
<description>Timer A Update reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHPER</name>
<displayName>CHPER</displayName>
<description>Timerx Chopper Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STRTPW</name>
<description>STRTPW</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CHPDTY</name>
<description>Timerx chopper duty cycle
value</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CHPFRQ</name>
<description>Timerx carrier frequency
value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT1ECR</name>
<displayName>CPT1ECR</displayName>
<description>Timerx Capture 2 Control
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPT2ECR</name>
<displayName>CPT2ECR</displayName>
<description>CPT2xCR</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TDCMP2</name>
<description>Timer D Compare 2</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>Timer D Compare 1</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1RST</name>
<description>Timer D output 1 Reset</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1SET</name>
<description>Timer D output 1 Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>Timer C Compare 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>Timer C Compare 1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1RST</name>
<description>Timer C output 1 Reset</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1SET</name>
<description>Timer C output 1 Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>Timer B Compare 2</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>Timer B Compare 1</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1RST</name>
<description>Timer B output 1 Reset</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1SET</name>
<description>Timer B output 1 Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>Timer A Compare 2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>Timer A Compare 1</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1RST</name>
<description>Timer A output 1 Reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1SET</name>
<description>Timer A output 1 Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV10CPT</name>
<description>External Event 10 Capture</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV9CPT</name>
<description>External Event 9 Capture</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV8CPT</name>
<description>External Event 8 Capture</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV7CPT</name>
<description>External Event 7 Capture</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV6CPT</name>
<description>External Event 6 Capture</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV5CPT</name>
<description>External Event 5 Capture</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV4CPT</name>
<description>External Event 4 Capture</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV3CPT</name>
<description>External Event 3 Capture</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV2CPT</name>
<description>External Event 2 Capture</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXEV1CPT</name>
<description>External Event 1 Capture</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDPCPT</name>
<description>Update Capture</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWCPT</name>
<description>Software Capture</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTER</name>
<displayName>OUTER</displayName>
<description>Timerx Output Register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIDL2</name>
<description>Output 2 Deadtime upon burst mode Idle
entry</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP2</name>
<description>Output 2 Chopper enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT2</name>
<description>Output 2 Fault state</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES2</name>
<description>Output 2 Idle State</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM2</name>
<description>Output 2 Idle mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Output 2 polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLYPRT</name>
<description>Delayed Protection</description>
<bitOffset>10</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DLYPRTEN</name>
<description>Delayed Protection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTEN</name>
<description>Deadtime enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIDL1</name>
<description>Output 1 Deadtime upon burst mode Idle
entry</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHP1</name>
<description>Output 1 Chopper enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Output 1 Fault state</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IDLES1</name>
<description>Output 1 Idle State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEM1</name>
<description>Output 1 Idle mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Output 1 polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTER</name>
<displayName>FLTER</displayName>
<description>Timerx Fault Register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTLCK</name>
<description>Fault sources Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5EN</name>
<description>Fault 5 enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4EN</name>
<description>Fault 4 enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3EN</name>
<description>Fault 3 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2EN</name>
<description>Fault 2 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1EN</name>
<description>Fault 1 enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HRTIM_Common</name>
<description>High Resolution Timer: Common
functions</description>
<groupName>HRTIM</groupName>
<baseAddress>0x40017780</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HRTIM_TIME</name>
<description>HRTIM1 timer E interrupt</description>
<value>108</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>Control Register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AD4USRC</name>
<description>ADC Trigger 4 Update
Source</description>
<bitOffset>25</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AD3USRC</name>
<description>ADC Trigger 3 Update
Source</description>
<bitOffset>22</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AD2USRC</name>
<description>ADC Trigger 2 Update
Source</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AD1USRC</name>
<description>ADC Trigger 1 Update
Source</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TEUDIS</name>
<description>Timer E Update Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDUDIS</name>
<description>Timer D Update Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCUDIS</name>
<description>Timer C Update Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBUDIS</name>
<description>Timer B Update Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAUDIS</name>
<description>Timer A Update Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUDIS</name>
<description>Master Update Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>Control Register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TERST</name>
<description>Timer E counter software
reset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDRST</name>
<description>Timer D counter software
reset</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCRST</name>
<description>Timer C counter software
reset</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBRST</name>
<description>Timer B counter software
reset</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TARST</name>
<description>Timer A counter software
reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MRST</name>
<description>Master Counter software
reset</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TESWU</name>
<description>Timer E Software Update</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDSWU</name>
<description>Timer D Software Update</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCSWU</name>
<description>Timer C Software Update</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBSWU</name>
<description>Timer B Software Update</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TASWU</name>
<description>Timer A Software update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSWU</name>
<description>Master Timer Software
update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Interrupt Status Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMPER</name>
<description>Burst mode Period Interrupt
Flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DLLRDY</name>
<description>DLL Ready Interrupt Flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SYSFLT</name>
<description>System Fault Interrupt
Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FLT5</name>
<description>Fault 5 Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FLT4</name>
<description>Fault 4 Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FLT3</name>
<description>Fault 3 Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FLT2</name>
<description>Fault 2 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FLT1</name>
<description>Fault 1 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Interrupt Clear Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMPERC</name>
<description>Burst mode period flag
Clear</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DLLRDYC</name>
<description>DLL Ready Interrupt flag
Clear</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SYSFLTC</name>
<description>System Fault Interrupt Flag
Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FLT5C</name>
<description>Fault 5 Interrupt Flag
Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FLT4C</name>
<description>Fault 4 Interrupt Flag
Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FLT3C</name>
<description>Fault 3 Interrupt Flag
Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FLT2C</name>
<description>Fault 2 Interrupt Flag
Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FLT1C</name>
<description>Fault 1 Interrupt Flag
Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>Interrupt Enable Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMPERIE</name>
<description>Burst mode period Interrupt
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLLRDYIE</name>
<description>DLL Ready Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYSFLTE</name>
<description>System Fault Interrupt
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5IE</name>
<description>Fault 5 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4IE</name>
<description>Fault 4 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3IE</name>
<description>Fault 3 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2IE</name>
<description>Fault 2 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1IE</name>
<description>Fault 1 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OENR</name>
<displayName>OENR</displayName>
<description>Output Enable Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TE2OEN</name>
<description>Timer E Output 2 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1OEN</name>
<description>Timer E Output 1 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD2OEN</name>
<description>Timer D Output 2 Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1OEN</name>
<description>Timer D Output 1 Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2OEN</name>
<description>Timer C Output 2 Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1OEN</name>
<description>Timer C Output 1 Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB2OEN</name>
<description>Timer B Output 2 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1OEN</name>
<description>Timer B Output 1 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA2OEN</name>
<description>Timer A Output 2 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1OEN</name>
<description>Timer A Output 1 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DISR</name>
<displayName>DISR</displayName>
<description>DISR</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TE2ODIS</name>
<description>TE2ODIS</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1ODIS</name>
<description>TE1ODIS</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD2ODIS</name>
<description>TD2ODIS</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1ODIS</name>
<description>TD1ODIS</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2ODIS</name>
<description>TC2ODIS</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1ODIS</name>
<description>TC1ODIS</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB2ODIS</name>
<description>TB2ODIS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1ODIS</name>
<description>TB1ODIS</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA2ODIS</name>
<description>TA2ODIS</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1ODIS</name>
<description>TA1ODIS</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<displayName>ODSR</displayName>
<description>Output Disable Status Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TE2ODS</name>
<description>Timer E Output 2 disable
status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE1ODS</name>
<description>Timer E Output 1 disable
status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD2ODS</name>
<description>Timer D Output 2 disable
status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TD1ODS</name>
<description>Timer D Output 1 disable
status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2ODS</name>
<description>Timer C Output 2 disable
status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1ODS</name>
<description>Timer C Output 1 disable
status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB2ODS</name>
<description>Timer B Output 2 disable
status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TB1ODS</name>
<description>Timer B Output 1 disable
status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA2ODS</name>
<description>Timer A Output 2 disable
status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TA1ODS</name>
<description>Timer A Output 1 disable
status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BMCR</name>
<displayName>BMCR</displayName>
<description>Burst Mode Control Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMSTAT</name>
<description>Burst Mode Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEBM</name>
<description>Timer E Burst Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDBM</name>
<description>Timer D Burst Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCBM</name>
<description>Timer C Burst Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBBM</name>
<description>Timer B Burst Mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TABM</name>
<description>Timer A Burst Mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTBM</name>
<description>Master Timer Burst Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BMPREN</name>
<description>Burst Mode Preload Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BMPRSC</name>
<description>Burst Mode Prescaler</description>
<bitOffset>6</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BMCLK</name>
<description>Burst Mode Clock source</description>
<bitOffset>2</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BMOM</name>
<description>Burst Mode operating mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BME</name>
<description>Burst Mode enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BMTRG</name>
<displayName>BMTRG</displayName>
<description>BMTRG</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OCHPEV</name>
<description>OCHPEV</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP2</name>
<description>TECMP2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TECMP1</name>
<description>TECMP1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEREP</name>
<description>TEREP</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TERST</name>
<description>TERST</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP2</name>
<description>TDCMP2</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCMP1</name>
<description>TDCMP1</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDREP</name>
<description>TDREP</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDRST</name>
<description>TDRST</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP2</name>
<description>TCCMP2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCMP1</name>
<description>TCCMP1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCREP</name>
<description>TCREP</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCRST</name>
<description>TCRST</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP2</name>
<description>TBCMP2</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBCMP1</name>
<description>TBCMP1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBREP</name>
<description>TBREP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TBRST</name>
<description>TBRST</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP2</name>
<description>TACMP2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TACMP1</name>
<description>TACMP1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAREP</name>
<description>TAREP</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TARST</name>
<description>TARST</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP4</name>
<description>MSTCMP4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP3</name>
<description>MSTCMP3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP2</name>
<description>MSTCMP2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTCMP1</name>
<description>MSTCMP1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTREP</name>
<description>MSTREP</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTRST</name>
<description>MSTRST</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SW</name>
<description>SW</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BMCMPR6</name>
<displayName>BMCMPR6</displayName>
<description>BMCMPR6</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMCMP</name>
<description>BMCMP</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BMPER</name>
<displayName>BMPER</displayName>
<description>Burst Mode Period Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMPER</name>
<description>Burst mode Period</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>EECR1</name>
<displayName>EECR1</displayName>
<description>Timer External Event Control Register
1</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE5FAST</name>
<description>External Event 5 Fast mode</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE5SNS</name>
<description>External Event 5
Sensitivity</description>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE5POL</name>
<description>External Event 5 Polarity</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE5SRC</name>
<description>External Event 5 Source</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE4FAST</name>
<description>External Event 4 Fast mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4SNS</name>
<description>External Event 4
Sensitivity</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE4POL</name>
<description>External Event 4 Polarity</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE4SRC</name>
<description>External Event 4 Source</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE3FAST</name>
<description>External Event 3 Fast mode</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3SNS</name>
<description>External Event 3
Sensitivity</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE3POL</name>
<description>External Event 3 Polarity</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE3SRC</name>
<description>External Event 3 Source</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE2FAST</name>
<description>External Event 2 Fast mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2SNS</name>
<description>External Event 2
Sensitivity</description>
<bitOffset>9</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE2POL</name>
<description>External Event 2 Polarity</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE2SRC</name>
<description>External Event 2 Source</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE1FAST</name>
<description>External Event 1 Fast mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1SNS</name>
<description>External Event 1
Sensitivity</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE1POL</name>
<description>External Event 1 Polarity</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE1SRC</name>
<description>External Event 1 Source</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>EECR2</name>
<displayName>EECR2</displayName>
<description>Timer External Event Control Register
2</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10SNS</name>
<description>External Event 10
Sensitivity</description>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE10POL</name>
<description>External Event 10 Polarity</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE10SRC</name>
<description>External Event 10 Source</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE9SNS</name>
<description>External Event 9
Sensitivity</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE9POL</name>
<description>External Event 9 Polarity</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9SRC</name>
<description>External Event 9 Source</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE8SNS</name>
<description>External Event 8
Sensitivity</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE8POL</name>
<description>External Event 8 Polarity</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8SRC</name>
<description>External Event 8 Source</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE7SNS</name>
<description>External Event 7
Sensitivity</description>
<bitOffset>9</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE7POL</name>
<description>External Event 7 Polarity</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7SRC</name>
<description>External Event 7 Source</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE6SNS</name>
<description>External Event 6
Sensitivity</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE6POL</name>
<description>External Event 6 Polarity</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6SRC</name>
<description>External Event 6 Source</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>EECR3</name>
<displayName>EECR3</displayName>
<description>Timer External Event Control Register
3</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EE10SNS</name>
<description>EE10SNS</description>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE10POL</name>
<description>EE10POL</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE10SRC</name>
<description>EE10SRC</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE9SNS</name>
<description>EE9SNS</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE9POL</name>
<description>EE9POL</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE9SRC</name>
<description>EE9SRC</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE8SNS</name>
<description>EE8SNS</description>
<bitOffset>15</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE8POL</name>
<description>EE8POL</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE8SRC</name>
<description>EE8SRC</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE7SNS</name>
<description>EE7SNS</description>
<bitOffset>9</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE7POL</name>
<description>EE7POL</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE7SRC</name>
<description>EE7SRC</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE6SNS</name>
<description>EE6SNS</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EE6POL</name>
<description>EE6POL</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EE6SRC</name>
<description>EE6SRC</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADC1R</name>
<displayName>ADC1R</displayName>
<description>ADC Trigger 1 Register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AD1TEPER</name>
<description>ADC trigger 1 on Timer E
Period</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TEC4</name>
<description>ADC trigger 1 on Timer E compare
4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TEC3</name>
<description>ADC trigger 1 on Timer E compare
3</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TEC2</name>
<description>ADC trigger 1 on Timer E compare
2</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDPER</name>
<description>ADC trigger 1 on Timer D
Period</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDC4</name>
<description>ADC trigger 1 on Timer D compare
4</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDC3</name>
<description>ADC trigger 1 on Timer D compare
3</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDC2</name>
<description>ADC trigger 1 on Timer D compare
2</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCPER</name>
<description>ADC trigger 1 on Timer C
Period</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCC4</name>
<description>ADC trigger 1 on Timer C compare
4</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCC3</name>
<description>ADC trigger 1 on Timer C compare
3</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCC2</name>
<description>ADC trigger 1 on Timer C compare
2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBRST</name>
<description>ADC trigger 1 on Timer B
Reset</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBPER</name>
<description>ADC trigger 1 on Timer B
Period</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBC4</name>
<description>ADC trigger 1 on Timer B compare
4</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBC3</name>
<description>ADC trigger 1 on Timer B compare
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBC2</name>
<description>ADC trigger 1 on Timer B compare
2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TARST</name>
<description>ADC trigger 1 on Timer A
Reset</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAPER</name>
<description>ADC trigger 1 on Timer A
Period</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAC4</name>
<description>ADC trigger 1 on Timer A compare
4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAC3</name>
<description>ADC trigger 1 on Timer A compare
3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAC2</name>
<description>ADC trigger 1 on Timer A compare
2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV5</name>
<description>ADC trigger 1 on External Event
5</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV4</name>
<description>ADC trigger 1 on External Event
4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV3</name>
<description>ADC trigger 1 on External Event
3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV2</name>
<description>ADC trigger 1 on External Event
2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV1</name>
<description>ADC trigger 1 on External Event
1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MPER</name>
<description>ADC trigger 1 on Master
Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC4</name>
<description>ADC trigger 1 on Master Compare
4</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC3</name>
<description>ADC trigger 1 on Master Compare
3</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC2</name>
<description>ADC trigger 1 on Master Compare
2</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC1</name>
<description>ADC trigger 1 on Master Compare
1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADC2R</name>
<displayName>ADC2R</displayName>
<description>ADC Trigger 2 Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AD2TERST</name>
<description>ADC trigger 2 on Timer E
Reset</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TEC4</name>
<description>ADC trigger 2 on Timer E compare
4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TEC3</name>
<description>ADC trigger 2 on Timer E compare
3</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TEC2</name>
<description>ADC trigger 2 on Timer E compare
2</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDRST</name>
<description>ADC trigger 2 on Timer D
Reset</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDPER</name>
<description>ADC trigger 2 on Timer D
Period</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDC4</name>
<description>ADC trigger 2 on Timer D compare
4</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDC3</name>
<description>ADC trigger 2 on Timer D compare
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDC2</name>
<description>ADC trigger 2 on Timer D compare
2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCRST</name>
<description>ADC trigger 2 on Timer C
Reset</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCPER</name>
<description>ADC trigger 2 on Timer C
Period</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCC4</name>
<description>ADC trigger 2 on Timer C compare
4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCC3</name>
<description>ADC trigger 2 on Timer C compare
3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCC2</name>
<description>ADC trigger 2 on Timer C compare
2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBPER</name>
<description>ADC trigger 2 on Timer B
Period</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBC4</name>
<description>ADC trigger 2 on Timer B compare
4</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBC3</name>
<description>ADC trigger 2 on Timer B compare
3</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBC2</name>
<description>ADC trigger 2 on Timer B compare
2</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAPER</name>
<description>ADC trigger 2 on Timer A
Period</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAC4</name>
<description>ADC trigger 2 on Timer A compare
4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAC3</name>
<description>ADC trigger 2 on Timer A compare
3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAC2</name>
<description>ADC trigger 2 on Timer A compare
2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV10</name>
<description>ADC trigger 2 on External Event
10</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV9</name>
<description>ADC trigger 2 on External Event
9</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV8</name>
<description>ADC trigger 2 on External Event
8</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV7</name>
<description>ADC trigger 2 on External Event
7</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV6</name>
<description>ADC trigger 2 on External Event
6</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MPER</name>
<description>ADC trigger 2 on Master
Period</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC4</name>
<description>ADC trigger 2 on Master Compare
4</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC3</name>
<description>ADC trigger 2 on Master Compare
3</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC2</name>
<description>ADC trigger 2 on Master Compare
2</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC1</name>
<description>ADC trigger 2 on Master Compare
1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADC3R</name>
<displayName>ADC3R</displayName>
<description>ADC Trigger 3 Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AD1TEPER</name>
<description>AD1TEPER</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TEC4</name>
<description>AD1TEC4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TEC3</name>
<description>AD1TEC3</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TEC2</name>
<description>AD1TEC2</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDPER</name>
<description>AD1TDPER</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDC4</name>
<description>AD1TDC4</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDC3</name>
<description>AD1TDC3</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TDC2</name>
<description>AD1TDC2</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCPER</name>
<description>AD1TCPER</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCC4</name>
<description>AD1TCC4</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCC3</name>
<description>AD1TCC3</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TCC2</name>
<description>AD1TCC2</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBRST</name>
<description>AD1TBRST</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBPER</name>
<description>AD1TBPER</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBC4</name>
<description>AD1TBC4</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBC3</name>
<description>AD1TBC3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TBC2</name>
<description>AD1TBC2</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TARST</name>
<description>AD1TARST</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAPER</name>
<description>AD1TAPER</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAC4</name>
<description>AD1TAC4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAC3</name>
<description>AD1TAC3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1TAC2</name>
<description>AD1TAC2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV5</name>
<description>AD1EEV5</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV4</name>
<description>AD1EEV4</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV3</name>
<description>AD1EEV3</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV2</name>
<description>AD1EEV2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1EEV1</name>
<description>AD1EEV1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MPER</name>
<description>AD1MPER</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC4</name>
<description>AD1MC4</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC3</name>
<description>AD1MC3</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC2</name>
<description>AD1MC2</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD1MC1</name>
<description>AD1MC1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADC4R</name>
<displayName>ADC4R</displayName>
<description>ADC Trigger 4 Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AD2TERST</name>
<description>AD2TERST</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TEC4</name>
<description>AD2TEC4</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TEC3</name>
<description>AD2TEC3</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TEC2</name>
<description>AD2TEC2</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDRST</name>
<description>AD2TDRST</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDPER</name>
<description>AD2TDPER</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDC4</name>
<description>AD2TDC4</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDC3</name>
<description>AD2TDC3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TDC2</name>
<description>AD2TDC2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCRST</name>
<description>AD2TCRST</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCPER</name>
<description>AD2TCPER</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCC4</name>
<description>AD2TCC4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCC3</name>
<description>AD2TCC3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TCC2</name>
<description>AD2TCC2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBPER</name>
<description>AD2TBPER</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBC4</name>
<description>AD2TBC4</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBC3</name>
<description>AD2TBC3</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TBC2</name>
<description>AD2TBC2</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAPER</name>
<description>AD2TAPER</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAC4</name>
<description>AD2TAC4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAC3</name>
<description>AD2TAC3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2TAC2</name>
<description>AD2TAC2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV10</name>
<description>AD2EEV10</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV9</name>
<description>AD2EEV9</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV8</name>
<description>AD2EEV8</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV7</name>
<description>AD2EEV7</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2EEV6</name>
<description>AD2EEV6</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MPER</name>
<description>AD2MPER</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC4</name>
<description>AD2MC4</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC3</name>
<description>AD2MC3</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC2</name>
<description>AD2MC2</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AD2MC1</name>
<description>AD2MC1</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DLLCR</name>
<displayName>DLLCR</displayName>
<description>DLL Control Register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CALRTE</name>
<description>DLL Calibration rate</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CALEN</name>
<description>DLL Calibration Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAL</name>
<description>DLL Calibration Start</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTINR1</name>
<displayName>FLTINR1</displayName>
<description>HRTIM Fault Input Register 1</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLT4LCK</name>
<description>FLT4LCK</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4F</name>
<description>FLT4F</description>
<bitOffset>27</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLT4SRC</name>
<description>FLT4SRC</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4P</name>
<description>FLT4P</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT4E</name>
<description>FLT4E</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3LCK</name>
<description>FLT3LCK</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3F</name>
<description>FLT3F</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLT3SRC</name>
<description>FLT3SRC</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3P</name>
<description>FLT3P</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT3E</name>
<description>FLT3E</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2LCK</name>
<description>FLT2LCK</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2F</name>
<description>FLT2F</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLT2SRC</name>
<description>FLT2SRC</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2P</name>
<description>FLT2P</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT2E</name>
<description>FLT2E</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1LCK</name>
<description>FLT1LCK</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1F</name>
<description>FLT1F</description>
<bitOffset>3</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLT1SRC</name>
<description>FLT1SRC</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1P</name>
<description>FLT1P</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT1E</name>
<description>FLT1E</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLTINR2</name>
<displayName>FLTINR2</displayName>
<description>HRTIM Fault Input Register 2</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTSD</name>
<description>FLTSD</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FLT5LCK</name>
<description>FLT5LCK</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5F</name>
<description>FLT5F</description>
<bitOffset>3</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLT5SRC</name>
<description>FLT5SRC</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5P</name>
<description>FLT5P</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLT5E</name>
<description>FLT5E</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDMUPDR</name>
<displayName>BDMUPDR</displayName>
<description>BDMUPDR</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCMP4</name>
<description>MCMP4</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP3</name>
<description>MCMP3</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP2</name>
<description>MCMP2</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCMP1</name>
<description>MCMP1</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MREP</name>
<description>MREP</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MPER</name>
<description>MPER</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCNT</name>
<description>MCNT</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MDIER</name>
<description>MDIER</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MICR</name>
<description>MICR</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCR</name>
<description>MCR</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDTxUPR</name>
<displayName>BDTxUPR</displayName>
<description>Burst DMA Timerx update
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIMxFLTR</name>
<description>HRTIM_FLTxR register update
enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxOUTR</name>
<description>HRTIM_OUTxR register update
enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCHPR</name>
<description>HRTIM_CHPxR register update
enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxRSTR</name>
<description>HRTIM_RSTxR register update
enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxEEFR2</name>
<description>HRTIM_EEFxR2 register update
enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxEEFR1</name>
<description>HRTIM_EEFxR1 register update
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxRST2R</name>
<description>HRTIM_RST2xR register update
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxSET2R</name>
<description>HRTIM_SET2xR register update
enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxRST1R</name>
<description>HRTIM_RST1xR register update
enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxSET1R</name>
<description>HRTIM_SET1xR register update
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMx_DTxR</name>
<description>HRTIM_DTxR register update
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCMP4</name>
<description>HRTIM_CMP4xR register update
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCMP3</name>
<description>HRTIM_CMP3xR register update
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCMP2</name>
<description>HRTIM_CMP2xR register update
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCMP1</name>
<description>HRTIM_CMP1xR register update
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxREP</name>
<description>HRTIM_REPxR register update
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxPER</name>
<description>HRTIM_PERxR register update
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCNT</name>
<description>HRTIM_CNTxR register update
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxDIER</name>
<description>HRTIM_TIMxDIER register update
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxICR</name>
<description>HRTIM_TIMxICR register update
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIMxCR</name>
<description>HRTIM_TIMxCR register update
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDMADR</name>
<displayName>BDMADR</displayName>
<description>Burst DMA Data Register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BDMADR</name>
<description>Burst DMA Data register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DFSDM</name>
<description>Digital filter for sigma delta
modulators</description>
<groupName>DFSDM</groupName>
<baseAddress>0x40017000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DFSDM1_FLT0</name>
<description>DFSDM1 filter 0 interrupt</description>
<value>110</value>
</interrupt>
<interrupt>
<name>DFSDM1_FLT1</name>
<description>DFSDM1 filter 1 interrupt</description>
<value>111</value>
</interrupt>
<interrupt>
<name>DFSDM1_FLT2</name>
<description>DFSDM1 filter 2 interrupt</description>
<value>112</value>
</interrupt>
<interrupt>
<name>DFSDM1_FLT3</name>
<description>DFSDM1 filter 3 interrupt</description>
<value>113</value>
</interrupt>
<registers>
<register>
<name>DFSDM_CHCFG0R1</name>
<displayName>DFSDM_CHCFG0R1</displayName>
<description>DFSDM channel configuration 0 register
1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
0</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
0</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
0</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 0 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
0</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG1R1</name>
<displayName>DFSDM_CHCFG1R1</displayName>
<description>DFSDM channel configuration 1 register
1</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
1</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
1</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
1</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 1 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
1</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG2R1</name>
<displayName>DFSDM_CHCFG2R1</displayName>
<description>DFSDM channel configuration 2 register
1</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
2</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
2</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
2</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
2</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 2 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
2</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG3R1</name>
<displayName>DFSDM_CHCFG3R1</displayName>
<description>DFSDM channel configuration 3 register
1</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
3</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
3</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
3</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 3 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
3</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG4R1</name>
<displayName>DFSDM_CHCFG4R1</displayName>
<description>DFSDM channel configuration 4 register
1</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
4</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
4</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
4</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 4 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
4</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG5R1</name>
<displayName>DFSDM_CHCFG5R1</displayName>
<description>DFSDM channel configuration 5 register
1</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
5</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
5</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
5</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 5 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
5</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG6R1</name>
<displayName>DFSDM_CHCFG6R1</displayName>
<description>DFSDM channel configuration 6 register
1</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
6</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
6</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
6</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 6 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
6</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG7R1</name>
<displayName>DFSDM_CHCFG7R1</displayName>
<description>DFSDM channel configuration 7 register
1</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SITP</name>
<description>Serial interface type for channel
7</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SPICKSEL</name>
<description>SPI clock select for channel
7</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCDEN</name>
<description>Short-circuit detector enable on channel
7</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABEN</name>
<description>Clock absence detector enable on channel
7</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHEN</name>
<description>Channel 7 enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINSEL</name>
<description>Channel inputs selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATMPX</name>
<description>Input data multiplexer for channel
7</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATPACK</name>
<description>Data packing mode in DFSDM_CHDATINyR
register</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CKOUTDIV</name>
<description>Output serial clock
divider</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CKOUTSRC</name>
<description>Output serial clock source
selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFSDMEN</name>
<description>Global enable for DFSDM
interface</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG0R2</name>
<displayName>DFSDM_CHCFG0R2</displayName>
<description>DFSDM channel configuration 0 register
2</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
0</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
0</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG1R2</name>
<displayName>DFSDM_CHCFG1R2</displayName>
<description>DFSDM channel configuration 1 register
2</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
1</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
1</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG2R2</name>
<displayName>DFSDM_CHCFG2R2</displayName>
<description>DFSDM channel configuration 2 register
2</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
2</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
2</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG3R2</name>
<displayName>DFSDM_CHCFG3R2</displayName>
<description>DFSDM channel configuration 3 register
2</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
3</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
3</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG4R2</name>
<displayName>DFSDM_CHCFG4R2</displayName>
<description>DFSDM channel configuration 4 register
2</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
4</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
4</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG5R2</name>
<displayName>DFSDM_CHCFG5R2</displayName>
<description>DFSDM channel configuration 5 register
2</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
5</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
5</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG6R2</name>
<displayName>DFSDM_CHCFG6R2</displayName>
<description>DFSDM channel configuration 6 register
2</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
6</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
6</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHCFG7R2</name>
<displayName>DFSDM_CHCFG7R2</displayName>
<description>DFSDM channel configuration 7 register
2</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTRBS</name>
<description>Data right bit-shift for channel
7</description>
<bitOffset>3</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>OFFSET</name>
<description>24-bit calibration offset for channel
7</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD0R</name>
<displayName>DFSDM_AWSCD0R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 0</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 0</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD1R</name>
<displayName>DFSDM_AWSCD1R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 1</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 1</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 1</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 1</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD2R</name>
<displayName>DFSDM_AWSCD2R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 2</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 2</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 2</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 2</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD3R</name>
<displayName>DFSDM_AWSCD3R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 3</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 3</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 3</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 3</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD4R</name>
<displayName>DFSDM_AWSCD4R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 4</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 4</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 4</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 4</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD5R</name>
<displayName>DFSDM_AWSCD5R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 5</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 5</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 5</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 5</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD6R</name>
<displayName>DFSDM_AWSCD6R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 6</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 6</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 6</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 6</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_AWSCD7R</name>
<displayName>DFSDM_AWSCD7R</displayName>
<description>DFSDM analog watchdog and short-circuit
detector register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCDT</name>
<description>short-circuit detector threshold for
channel 7</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKSCD</name>
<description>Break signal assignment for
short-circuit detector on channel 7</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWFOSR</name>
<description>Analog watchdog filter oversampling
ratio (decimation rate) on channel 7</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>AWFORD</name>
<description>Analog watchdog Sinc filter order on
channel 7</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT0R</name>
<displayName>DFSDM_CHWDAT0R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT1R</name>
<displayName>DFSDM_CHWDAT1R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT2R</name>
<displayName>DFSDM_CHWDAT2R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT3R</name>
<displayName>DFSDM_CHWDAT3R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT4R</name>
<displayName>DFSDM_CHWDAT4R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT5R</name>
<displayName>DFSDM_CHWDAT5R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT6R</name>
<displayName>DFSDM_CHWDAT6R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x78</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHWDAT7R</name>
<displayName>DFSDM_CHWDAT7R</displayName>
<description>DFSDM channel watchdog filter data
register</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDATA</name>
<description>Input channel y watchdog
data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN0R</name>
<displayName>DFSDM_CHDATIN0R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN1R</name>
<displayName>DFSDM_CHDATIN1R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 1</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 2</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN2R</name>
<displayName>DFSDM_CHDATIN2R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 2</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 3</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN3R</name>
<displayName>DFSDM_CHDATIN3R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 3</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 4</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN4R</name>
<displayName>DFSDM_CHDATIN4R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 4</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 5</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN5R</name>
<displayName>DFSDM_CHDATIN5R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 5</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 6</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN6R</name>
<displayName>DFSDM_CHDATIN6R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 6</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 7</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM_CHDATIN7R</name>
<displayName>DFSDM_CHDATIN7R</displayName>
<description>DFSDM channel data input
register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDAT0</name>
<description>Input data for channel 7</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>INDAT1</name>
<description>Input data for channel 8</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_CR1</name>
<displayName>DFSDM0_CR1</displayName>
<description>DFSDM control register 1</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DFEN</name>
<description>DFSDM enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSWSTART</name>
<description>Start a conversion of the injected group
of channels</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSYNC</name>
<description>Launch an injected conversion
synchronously with the DFSDM0 JSWSTART
trigger</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSCAN</name>
<description>Scanning conversion mode for injected
conversions</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JDMAEN</name>
<description>DMA channel enabled to read data for the
injected channel group</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEXTSEL</name>
<description>Trigger signal selection for launching
injected conversions</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JEXTEN</name>
<description>Trigger enable and trigger edge
selection for injected conversions</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RSWSTART</name>
<description>Software start of a conversion on the
regular channel</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCONT</name>
<description>Continuous mode selection for regular
conversions</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSYNC</name>
<description>Launch regular conversion synchronously
with DFSDM0</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDMAEN</name>
<description>DMA channel enabled to read data for the
regular conversion</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCH</name>
<description>Regular channel selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FAST</name>
<description>Fast conversion mode selection for
regular conversions</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWFSEL</name>
<description>Analog watchdog fast mode
select</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_CR1</name>
<displayName>DFSDM1_CR1</displayName>
<description>DFSDM control register 1</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DFEN</name>
<description>DFSDM enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSWSTART</name>
<description>Start a conversion of the injected group
of channels</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSYNC</name>
<description>Launch an injected conversion
synchronously with the DFSDM0 JSWSTART
trigger</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSCAN</name>
<description>Scanning conversion mode for injected
conversions</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JDMAEN</name>
<description>DMA channel enabled to read data for the
injected channel group</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEXTSEL</name>
<description>Trigger signal selection for launching
injected conversions</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JEXTEN</name>
<description>Trigger enable and trigger edge
selection for injected conversions</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RSWSTART</name>
<description>Software start of a conversion on the
regular channel</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCONT</name>
<description>Continuous mode selection for regular
conversions</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSYNC</name>
<description>Launch regular conversion synchronously
with DFSDM0</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDMAEN</name>
<description>DMA channel enabled to read data for the
regular conversion</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCH</name>
<description>Regular channel selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FAST</name>
<description>Fast conversion mode selection for
regular conversions</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWFSEL</name>
<description>Analog watchdog fast mode
select</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_CR1</name>
<displayName>DFSDM2_CR1</displayName>
<description>DFSDM control register 1</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DFEN</name>
<description>DFSDM enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSWSTART</name>
<description>Start a conversion of the injected group
of channels</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSYNC</name>
<description>Launch an injected conversion
synchronously with the DFSDM0 JSWSTART
trigger</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSCAN</name>
<description>Scanning conversion mode for injected
conversions</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JDMAEN</name>
<description>DMA channel enabled to read data for the
injected channel group</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEXTSEL</name>
<description>Trigger signal selection for launching
injected conversions</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JEXTEN</name>
<description>Trigger enable and trigger edge
selection for injected conversions</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RSWSTART</name>
<description>Software start of a conversion on the
regular channel</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCONT</name>
<description>Continuous mode selection for regular
conversions</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSYNC</name>
<description>Launch regular conversion synchronously
with DFSDM0</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDMAEN</name>
<description>DMA channel enabled to read data for the
regular conversion</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCH</name>
<description>Regular channel selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FAST</name>
<description>Fast conversion mode selection for
regular conversions</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWFSEL</name>
<description>Analog watchdog fast mode
select</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_CR1</name>
<displayName>DFSDM3_CR1</displayName>
<description>DFSDM control register 1</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DFEN</name>
<description>DFSDM enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSWSTART</name>
<description>Start a conversion of the injected group
of channels</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSYNC</name>
<description>Launch an injected conversion
synchronously with the DFSDM0 JSWSTART
trigger</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JSCAN</name>
<description>Scanning conversion mode for injected
conversions</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JDMAEN</name>
<description>DMA channel enabled to read data for the
injected channel group</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JEXTSEL</name>
<description>Trigger signal selection for launching
injected conversions</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>JEXTEN</name>
<description>Trigger enable and trigger edge
selection for injected conversions</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RSWSTART</name>
<description>Software start of a conversion on the
regular channel</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCONT</name>
<description>Continuous mode selection for regular
conversions</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSYNC</name>
<description>Launch regular conversion synchronously
with DFSDM0</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDMAEN</name>
<description>DMA channel enabled to read data for the
regular conversion</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCH</name>
<description>Regular channel selection</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FAST</name>
<description>Fast conversion mode selection for
regular conversions</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWFSEL</name>
<description>Analog watchdog fast mode
select</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_CR2</name>
<displayName>DFSDM0_CR2</displayName>
<description>DFSDM control register 2</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCIE</name>
<description>Injected end of conversion interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCIE</name>
<description>Regular end of conversion interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRIE</name>
<description>Injected data overrun interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRIE</name>
<description>Regular data overrun interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDIE</name>
<description>Analog watchdog interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCDIE</name>
<description>Short-circuit detector interrupt
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABIE</name>
<description>Clock absence interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCH</name>
<description>Extremes detector channel
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWDCH</name>
<description>Analog watchdog channel
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_CR2</name>
<displayName>DFSDM1_CR2</displayName>
<description>DFSDM control register 2</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCIE</name>
<description>Injected end of conversion interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCIE</name>
<description>Regular end of conversion interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRIE</name>
<description>Injected data overrun interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRIE</name>
<description>Regular data overrun interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDIE</name>
<description>Analog watchdog interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCDIE</name>
<description>Short-circuit detector interrupt
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABIE</name>
<description>Clock absence interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCH</name>
<description>Extremes detector channel
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWDCH</name>
<description>Analog watchdog channel
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_CR2</name>
<displayName>DFSDM2_CR2</displayName>
<description>DFSDM control register 2</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCIE</name>
<description>Injected end of conversion interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCIE</name>
<description>Regular end of conversion interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRIE</name>
<description>Injected data overrun interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRIE</name>
<description>Regular data overrun interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDIE</name>
<description>Analog watchdog interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCDIE</name>
<description>Short-circuit detector interrupt
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABIE</name>
<description>Clock absence interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCH</name>
<description>Extremes detector channel
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWDCH</name>
<description>Analog watchdog channel
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_CR2</name>
<displayName>DFSDM3_CR2</displayName>
<description>DFSDM control register 2</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCIE</name>
<description>Injected end of conversion interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCIE</name>
<description>Regular end of conversion interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRIE</name>
<description>Injected data overrun interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRIE</name>
<description>Regular data overrun interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDIE</name>
<description>Analog watchdog interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCDIE</name>
<description>Short-circuit detector interrupt
enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABIE</name>
<description>Clock absence interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCH</name>
<description>Extremes detector channel
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWDCH</name>
<description>Analog watchdog channel
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_ISR</name>
<displayName>DFSDM0_ISR</displayName>
<description>DFSDM interrupt and status
register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCF</name>
<description>End of injected conversion
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCF</name>
<description>End of regular conversion
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRF</name>
<description>Injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRF</name>
<description>Regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDF</name>
<description>Analog watchdog</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JCIP</name>
<description>Injected conversion in progress
status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCIP</name>
<description>Regular conversion in progress
status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABF</name>
<description>Clock absence flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SCDF</name>
<description>short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_ISR</name>
<displayName>DFSDM1_ISR</displayName>
<description>DFSDM interrupt and status
register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCF</name>
<description>End of injected conversion
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCF</name>
<description>End of regular conversion
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRF</name>
<description>Injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRF</name>
<description>Regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDF</name>
<description>Analog watchdog</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JCIP</name>
<description>Injected conversion in progress
status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCIP</name>
<description>Regular conversion in progress
status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABF</name>
<description>Clock absence flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SCDF</name>
<description>short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_ISR</name>
<displayName>DFSDM2_ISR</displayName>
<description>DFSDM interrupt and status
register</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCF</name>
<description>End of injected conversion
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCF</name>
<description>End of regular conversion
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRF</name>
<description>Injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRF</name>
<description>Regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDF</name>
<description>Analog watchdog</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JCIP</name>
<description>Injected conversion in progress
status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCIP</name>
<description>Regular conversion in progress
status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABF</name>
<description>Clock absence flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SCDF</name>
<description>short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_ISR</name>
<displayName>DFSDM3_ISR</displayName>
<description>DFSDM interrupt and status
register</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEOCF</name>
<description>End of injected conversion
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REOCF</name>
<description>End of regular conversion
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JOVRF</name>
<description>Injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ROVRF</name>
<description>Regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWDF</name>
<description>Analog watchdog</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>JCIP</name>
<description>Injected conversion in progress
status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RCIP</name>
<description>Regular conversion in progress
status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKABF</name>
<description>Clock absence flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>SCDF</name>
<description>short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_ICR</name>
<displayName>DFSDM0_ICR</displayName>
<description>DFSDM interrupt flag clear
register</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRJOVRF</name>
<description>Clear the injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRROVRF</name>
<description>Clear the regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRCKABF</name>
<description>Clear the clock absence
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRSCDF</name>
<description>Clear the short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_ICR</name>
<displayName>DFSDM1_ICR</displayName>
<description>DFSDM interrupt flag clear
register</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRJOVRF</name>
<description>Clear the injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRROVRF</name>
<description>Clear the regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRCKABF</name>
<description>Clear the clock absence
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRSCDF</name>
<description>Clear the short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_ICR</name>
<displayName>DFSDM2_ICR</displayName>
<description>DFSDM interrupt flag clear
register</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRJOVRF</name>
<description>Clear the injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRROVRF</name>
<description>Clear the regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRCKABF</name>
<description>Clear the clock absence
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRSCDF</name>
<description>Clear the short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_ICR</name>
<displayName>DFSDM3_ICR</displayName>
<description>DFSDM interrupt flag clear
register</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRJOVRF</name>
<description>Clear the injected conversion overrun
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRROVRF</name>
<description>Clear the regular conversion overrun
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLRCKABF</name>
<description>Clear the clock absence
flag</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRSCDF</name>
<description>Clear the short-circuit detector
flag</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_JCHGR</name>
<displayName>DFSDM0_JCHGR</displayName>
<description>DFSDM injected channel group selection
register</description>
<addressOffset>0xE0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JCHG</name>
<description>Injected channel group
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_JCHGR</name>
<displayName>DFSDM1_JCHGR</displayName>
<description>DFSDM injected channel group selection
register</description>
<addressOffset>0xE4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JCHG</name>
<description>Injected channel group
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_JCHGR</name>
<displayName>DFSDM2_JCHGR</displayName>
<description>DFSDM injected channel group selection
register</description>
<addressOffset>0xE8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JCHG</name>
<description>Injected channel group
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_JCHGR</name>
<displayName>DFSDM3_JCHGR</displayName>
<description>DFSDM injected channel group selection
register</description>
<addressOffset>0xEC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JCHG</name>
<description>Injected channel group
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_FCR</name>
<displayName>DFSDM0_FCR</displayName>
<description>DFSDM filter control register</description>
<addressOffset>0xF0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IOSR</name>
<description>Integrator oversampling ratio (averaging
length)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FOSR</name>
<description>Sinc filter oversampling ratio
(decimation rate)</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>FORD</name>
<description>Sinc filter order</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_FCR</name>
<displayName>DFSDM1_FCR</displayName>
<description>DFSDM filter control register</description>
<addressOffset>0xF4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IOSR</name>
<description>Integrator oversampling ratio (averaging
length)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FOSR</name>
<description>Sinc filter oversampling ratio
(decimation rate)</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>FORD</name>
<description>Sinc filter order</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_FCR</name>
<displayName>DFSDM2_FCR</displayName>
<description>DFSDM filter control register</description>
<addressOffset>0xF8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IOSR</name>
<description>Integrator oversampling ratio (averaging
length)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FOSR</name>
<description>Sinc filter oversampling ratio
(decimation rate)</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>FORD</name>
<description>Sinc filter order</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_FCR</name>
<displayName>DFSDM3_FCR</displayName>
<description>DFSDM filter control register</description>
<addressOffset>0xFC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IOSR</name>
<description>Integrator oversampling ratio (averaging
length)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FOSR</name>
<description>Sinc filter oversampling ratio
(decimation rate)</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>FORD</name>
<description>Sinc filter order</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_JDATAR</name>
<displayName>DFSDM0_JDATAR</displayName>
<description>DFSDM data register for injected
group</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATACH</name>
<description>Injected channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JDATA</name>
<description>Injected group conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_JDATAR</name>
<displayName>DFSDM1_JDATAR</displayName>
<description>DFSDM data register for injected
group</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATACH</name>
<description>Injected channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JDATA</name>
<description>Injected group conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_JDATAR</name>
<displayName>DFSDM2_JDATAR</displayName>
<description>DFSDM data register for injected
group</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATACH</name>
<description>Injected channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JDATA</name>
<description>Injected group conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_JDATAR</name>
<displayName>DFSDM3_JDATAR</displayName>
<description>DFSDM data register for injected
group</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JDATACH</name>
<description>Injected channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JDATA</name>
<description>Injected group conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_RDATAR</name>
<displayName>DFSDM0_RDATAR</displayName>
<description>DFSDM data register for the regular
channel</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATACH</name>
<description>Regular channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RPEND</name>
<description>Regular channel pending
data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDATA</name>
<description>Regular channel conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_RDATAR</name>
<displayName>DFSDM1_RDATAR</displayName>
<description>DFSDM data register for the regular
channel</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATACH</name>
<description>Regular channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RPEND</name>
<description>Regular channel pending
data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDATA</name>
<description>Regular channel conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_RDATAR</name>
<displayName>DFSDM2_RDATAR</displayName>
<description>DFSDM data register for the regular
channel</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATACH</name>
<description>Regular channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RPEND</name>
<description>Regular channel pending
data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDATA</name>
<description>Regular channel conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_RDATAR</name>
<displayName>DFSDM3_RDATAR</displayName>
<description>DFSDM data register for the regular
channel</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATACH</name>
<description>Regular channel most recently
converted</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RPEND</name>
<description>Regular channel pending
data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDATA</name>
<description>Regular channel conversion
data</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_AWHTR</name>
<displayName>DFSDM0_AWHTR</displayName>
<description>DFSDM analog watchdog high threshold
register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWH</name>
<description>Break signal assignment to analog
watchdog high threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWHT</name>
<description>Analog watchdog high
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_AWHTR</name>
<displayName>DFSDM1_AWHTR</displayName>
<description>DFSDM analog watchdog high threshold
register</description>
<addressOffset>0x124</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWH</name>
<description>Break signal assignment to analog
watchdog high threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWHT</name>
<description>Analog watchdog high
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_AWHTR</name>
<displayName>DFSDM2_AWHTR</displayName>
<description>DFSDM analog watchdog high threshold
register</description>
<addressOffset>0x128</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWH</name>
<description>Break signal assignment to analog
watchdog high threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWHT</name>
<description>Analog watchdog high
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_AWHTR</name>
<displayName>DFSDM3_AWHTR</displayName>
<description>DFSDM analog watchdog high threshold
register</description>
<addressOffset>0x12C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWH</name>
<description>Break signal assignment to analog
watchdog high threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWHT</name>
<description>Analog watchdog high
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_AWLTR</name>
<displayName>DFSDM0_AWLTR</displayName>
<description>DFSDM analog watchdog low threshold
register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWL</name>
<description>Break signal assignment to analog
watchdog low threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWLT</name>
<description>Analog watchdog low
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_AWLTR</name>
<displayName>DFSDM1_AWLTR</displayName>
<description>DFSDM analog watchdog low threshold
register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWL</name>
<description>Break signal assignment to analog
watchdog low threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWLT</name>
<description>Analog watchdog low
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_AWLTR</name>
<displayName>DFSDM2_AWLTR</displayName>
<description>DFSDM analog watchdog low threshold
register</description>
<addressOffset>0x138</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWL</name>
<description>Break signal assignment to analog
watchdog low threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWLT</name>
<description>Analog watchdog low
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_AWLTR</name>
<displayName>DFSDM3_AWLTR</displayName>
<description>DFSDM analog watchdog low threshold
register</description>
<addressOffset>0x13C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKAWL</name>
<description>Break signal assignment to analog
watchdog low threshold event</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AWLT</name>
<description>Analog watchdog low
threshold</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_AWSR</name>
<displayName>DFSDM0_AWSR</displayName>
<description>DFSDM analog watchdog status
register</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AWLTF</name>
<description>Analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWHTF</name>
<description>Analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_AWSR</name>
<displayName>DFSDM1_AWSR</displayName>
<description>DFSDM analog watchdog status
register</description>
<addressOffset>0x144</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AWLTF</name>
<description>Analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWHTF</name>
<description>Analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_AWSR</name>
<displayName>DFSDM2_AWSR</displayName>
<description>DFSDM analog watchdog status
register</description>
<addressOffset>0x148</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AWLTF</name>
<description>Analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWHTF</name>
<description>Analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_AWSR</name>
<displayName>DFSDM3_AWSR</displayName>
<description>DFSDM analog watchdog status
register</description>
<addressOffset>0x14C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AWLTF</name>
<description>Analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>AWHTF</name>
<description>Analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_AWCFR</name>
<displayName>DFSDM0_AWCFR</displayName>
<description>DFSDM analog watchdog clear flag
register</description>
<addressOffset>0x150</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRAWLTF</name>
<description>Clear the analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRAWHTF</name>
<description>Clear the analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_AWCFR</name>
<displayName>DFSDM1_AWCFR</displayName>
<description>DFSDM analog watchdog clear flag
register</description>
<addressOffset>0x154</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRAWLTF</name>
<description>Clear the analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRAWHTF</name>
<description>Clear the analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_AWCFR</name>
<displayName>DFSDM2_AWCFR</displayName>
<description>DFSDM analog watchdog clear flag
register</description>
<addressOffset>0x158</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRAWLTF</name>
<description>Clear the analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRAWHTF</name>
<description>Clear the analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_AWCFR</name>
<displayName>DFSDM3_AWCFR</displayName>
<description>DFSDM analog watchdog clear flag
register</description>
<addressOffset>0x15C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLRAWLTF</name>
<description>Clear the analog watchdog low threshold
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CLRAWHTF</name>
<description>Clear the analog watchdog high threshold
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_EXMAX</name>
<displayName>DFSDM0_EXMAX</displayName>
<description>DFSDM Extremes detector maximum
register</description>
<addressOffset>0x160</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMAXCH</name>
<description>Extremes detector maximum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMAX</name>
<description>Extremes detector maximum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_EXMAX</name>
<displayName>DFSDM1_EXMAX</displayName>
<description>DFSDM Extremes detector maximum
register</description>
<addressOffset>0x164</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMAXCH</name>
<description>Extremes detector maximum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMAX</name>
<description>Extremes detector maximum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_EXMAX</name>
<displayName>DFSDM2_EXMAX</displayName>
<description>DFSDM Extremes detector maximum
register</description>
<addressOffset>0x168</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMAXCH</name>
<description>Extremes detector maximum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMAX</name>
<description>Extremes detector maximum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_EXMAX</name>
<displayName>DFSDM3_EXMAX</displayName>
<description>DFSDM Extremes detector maximum
register</description>
<addressOffset>0x16C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMAXCH</name>
<description>Extremes detector maximum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMAX</name>
<description>Extremes detector maximum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_EXMIN</name>
<displayName>DFSDM0_EXMIN</displayName>
<description>DFSDM Extremes detector minimum
register</description>
<addressOffset>0x170</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMINCH</name>
<description>Extremes detector minimum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMIN</name>
<description>Extremes detector minimum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_EXMIN</name>
<displayName>DFSDM1_EXMIN</displayName>
<description>DFSDM Extremes detector minimum
register</description>
<addressOffset>0x174</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMINCH</name>
<description>Extremes detector minimum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMIN</name>
<description>Extremes detector minimum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_EXMIN</name>
<displayName>DFSDM2_EXMIN</displayName>
<description>DFSDM Extremes detector minimum
register</description>
<addressOffset>0x178</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMINCH</name>
<description>Extremes detector minimum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMIN</name>
<description>Extremes detector minimum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_EXMIN</name>
<displayName>DFSDM3_EXMIN</displayName>
<description>DFSDM Extremes detector minimum
register</description>
<addressOffset>0x17C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXMINCH</name>
<description>Extremes detector minimum data
channel</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EXMIN</name>
<description>Extremes detector minimum
value</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM0_CNVTIMR</name>
<displayName>DFSDM0_CNVTIMR</displayName>
<description>DFSDM conversion timer
register</description>
<addressOffset>0x180</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNVCNT</name>
<description>28-bit timer counting conversion
time</description>
<bitOffset>4</bitOffset>
<bitWidth>28</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM1_CNVTIMR</name>
<displayName>DFSDM1_CNVTIMR</displayName>
<description>DFSDM conversion timer
register</description>
<addressOffset>0x184</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNVCNT</name>
<description>28-bit timer counting conversion
time</description>
<bitOffset>4</bitOffset>
<bitWidth>28</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM2_CNVTIMR</name>
<displayName>DFSDM2_CNVTIMR</displayName>
<description>DFSDM conversion timer
register</description>
<addressOffset>0x188</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNVCNT</name>
<description>28-bit timer counting conversion
time</description>
<bitOffset>4</bitOffset>
<bitWidth>28</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSDM3_CNVTIMR</name>
<displayName>DFSDM3_CNVTIMR</displayName>
<description>DFSDM conversion timer
register</description>
<addressOffset>0x18C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNVCNT</name>
<description>28-bit timer counting conversion
time</description>
<bitOffset>4</bitOffset>
<bitWidth>28</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TIM16</name>
<description>General-purpose-timers</description>
<groupName>TIMs</groupName>
<baseAddress>0x40014400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TIM16</name>
<description>TIM16 global interrupt</description>
<value>117</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Counter enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDIS</name>
<description>Update disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>URS</name>
<description>Update request source</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPM</name>
<description>One-pulse mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARPE</name>
<description>Auto-reload preload enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKD</name>
<description>Clock division</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>UIFREMAP</name>
<description>UIF status bit remapping</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>OIS1N</name>
<description>Output Idle state 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS1</name>
<description>Output Idle state 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCDS</name>
<description>Capture/compare DMA
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCUS</name>
<description>Capture/compare control update
selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCPC</name>
<description>Capture/compare preloaded
control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIER</name>
<displayName>DIER</displayName>
<description>DMA/Interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UIE</name>
<description>Update interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IE</name>
<description>Capture/Compare 1 interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIE</name>
<description>COM interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIE</name>
<description>Break interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDE</name>
<description>Update DMA request enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1DE</name>
<description>Capture/Compare 1 DMA request
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMDE</name>
<description>COM DMA request enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC1OF</name>
<description>Capture/Compare 1 overcapture
flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIF</name>
<description>Break interrupt flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIF</name>
<description>COM interrupt flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IF</name>
<description>Capture/compare 1 interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIF</name>
<description>Update interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EGR</name>
<displayName>EGR</displayName>
<description>event generation register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BG</name>
<description>Break generation</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMG</name>
<description>Capture/Compare control update
generation</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1G</name>
<description>Capture/compare 1
generation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UG</name>
<description>Update generation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Output</name>
<displayName>CCMR1_Output</displayName>
<description>capture/compare mode register (output
mode)</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC1FE</name>
<description>Output Compare 1 fast
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1PE</name>
<description>Output Compare 1 preload
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M</name>
<description>Output Compare 1 mode</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC1M_3</name>
<description>Output Compare 1 mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Input</name>
<displayName>CCMR1_Input</displayName>
<description>capture/compare mode register 1 (input
mode)</description>
<alternateRegister>CCMR1_Output</alternateRegister>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC1F</name>
<description>Input capture 1 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC1PSC</name>
<description>Input capture 1 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCER</name>
<displayName>CCER</displayName>
<description>capture/compare enable
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC1NP</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NE</name>
<description>Capture/Compare 1 complementary output
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1P</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1E</name>
<description>Capture/Compare 1 output
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>counter</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UIFCPY</name>
<description>UIF Copy</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PSC</name>
<displayName>PSC</displayName>
<description>prescaler</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>auto-reload register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Auto-reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<displayName>RCR</displayName>
<description>repetition counter register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>REP</name>
<description>Repetition counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<displayName>CCR1</displayName>
<description>capture/compare register 1</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR1</name>
<description>Capture/Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDTR</name>
<displayName>BDTR</displayName>
<description>break and dead-time register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DTG</name>
<description>Dead-time generator setup</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock configuration</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSSI</name>
<description>Off-state selection for Idle
mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSSR</name>
<description>Off-state selection for Run
mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKE</name>
<description>Break enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKP</name>
<description>Break polarity</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AOE</name>
<description>Automatic output enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MOE</name>
<description>Main output enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKF</name>
<description>Break filter</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<displayName>DCR</displayName>
<description>DMA control register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DBL</name>
<description>DMA burst length</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DBA</name>
<description>DMA base address</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMAR</name>
<displayName>DMAR</displayName>
<description>DMA address for full transfer</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DMAB</name>
<description>DMA register for burst
accesses</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIM16_AF1</name>
<displayName>TIM16_AF1</displayName>
<description>TIM16 alternate function register
1</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BKINE</name>
<description>BRK BKIN input enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1E</name>
<description>BRK COMP1 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2E</name>
<description>BRK COMP2 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKDFBK1E</name>
<description>BRK dfsdm1_break[1] enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKINP</name>
<description>BRK BKIN input polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1P</name>
<description>BRK COMP1 input polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2P</name>
<description>BRK COMP2 input polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIM16_TISEL</name>
<displayName>TIM16_TISEL</displayName>
<description>TIM16 input selection register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TI1SEL</name>
<description>selects TI1[0] to TI1[15]
input</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TIM17</name>
<description>General-purpose-timers</description>
<groupName>TIMs</groupName>
<baseAddress>0x40014800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TIM17</name>
<description>TIM17 global interrupt</description>
<value>118</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Counter enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDIS</name>
<description>Update disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>URS</name>
<description>Update request source</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPM</name>
<description>One-pulse mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARPE</name>
<description>Auto-reload preload enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKD</name>
<description>Clock division</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>UIFREMAP</name>
<description>UIF status bit remapping</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>OIS1N</name>
<description>Output Idle state 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS1</name>
<description>Output Idle state 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCDS</name>
<description>Capture/compare DMA
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCUS</name>
<description>Capture/compare control update
selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCPC</name>
<description>Capture/compare preloaded
control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIER</name>
<displayName>DIER</displayName>
<description>DMA/Interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UIE</name>
<description>Update interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IE</name>
<description>Capture/Compare 1 interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIE</name>
<description>COM interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIE</name>
<description>Break interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDE</name>
<description>Update DMA request enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1DE</name>
<description>Capture/Compare 1 DMA request
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMDE</name>
<description>COM DMA request enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC1OF</name>
<description>Capture/Compare 1 overcapture
flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIF</name>
<description>Break interrupt flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIF</name>
<description>COM interrupt flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IF</name>
<description>Capture/compare 1 interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIF</name>
<description>Update interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EGR</name>
<displayName>EGR</displayName>
<description>event generation register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BG</name>
<description>Break generation</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMG</name>
<description>Capture/Compare control update
generation</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1G</name>
<description>Capture/compare 1
generation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UG</name>
<description>Update generation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Output</name>
<displayName>CCMR1_Output</displayName>
<description>capture/compare mode register (output
mode)</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC1FE</name>
<description>Output Compare 1 fast
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1PE</name>
<description>Output Compare 1 preload
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M</name>
<description>Output Compare 1 mode</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC1M_3</name>
<description>Output Compare 1 mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Input</name>
<displayName>CCMR1_Input</displayName>
<description>capture/compare mode register 1 (input
mode)</description>
<alternateRegister>CCMR1_Output</alternateRegister>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC1F</name>
<description>Input capture 1 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC1PSC</name>
<description>Input capture 1 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCER</name>
<displayName>CCER</displayName>
<description>capture/compare enable
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC1NP</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NE</name>
<description>Capture/Compare 1 complementary output
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1P</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1E</name>
<description>Capture/Compare 1 output
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>counter</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UIFCPY</name>
<description>UIF Copy</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PSC</name>
<displayName>PSC</displayName>
<description>prescaler</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>auto-reload register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Auto-reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<displayName>RCR</displayName>
<description>repetition counter register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>REP</name>
<description>Repetition counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<displayName>CCR1</displayName>
<description>capture/compare register 1</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR1</name>
<description>Capture/Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDTR</name>
<displayName>BDTR</displayName>
<description>break and dead-time register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DTG</name>
<description>Dead-time generator setup</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock configuration</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSSI</name>
<description>Off-state selection for Idle
mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSSR</name>
<description>Off-state selection for Run
mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKE</name>
<description>Break enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKP</name>
<description>Break polarity</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AOE</name>
<description>Automatic output enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MOE</name>
<description>Main output enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKF</name>
<description>Break filter</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<displayName>DCR</displayName>
<description>DMA control register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DBL</name>
<description>DMA burst length</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DBA</name>
<description>DMA base address</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMAR</name>
<displayName>DMAR</displayName>
<description>DMA address for full transfer</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DMAB</name>
<description>DMA register for burst
accesses</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIM17_AF1</name>
<displayName>TIM17_AF1</displayName>
<description>TIM17 alternate function register
1</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BKINE</name>
<description>BRK BKIN input enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1E</name>
<description>BRK COMP1 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2E</name>
<description>BRK COMP2 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKDFBK1E</name>
<description>BRK dfsdm1_break[1] enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKINP</name>
<description>BRK BKIN input polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1P</name>
<description>BRK COMP1 input polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2P</name>
<description>BRK COMP2 input polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIM17_TISEL</name>
<displayName>TIM17_TISEL</displayName>
<description>TIM17 input selection register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TI1SEL</name>
<description>selects TI1[0] to TI1[15]
input</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TIM15</name>
<description>General purpose timers</description>
<groupName>TIMs</groupName>
<baseAddress>0x40014000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TIM15</name>
<description>TIM15 global interrupt</description>
<value>116</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Counter enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDIS</name>
<description>Update disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>URS</name>
<description>Update request source</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPM</name>
<description>One-pulse mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARPE</name>
<description>Auto-reload preload enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKD</name>
<description>Clock division</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>UIFREMAP</name>
<description>UIF status bit remapping</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CCPC</name>
<description>Capture/compare preloaded
control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCUS</name>
<description>Capture/compare control update
selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCDS</name>
<description>Capture/compare DMA
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMS</name>
<description>Master mode selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TI1S</name>
<description>TI1 selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS1</name>
<description>Output Idle state 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS1N</name>
<description>Output Idle state 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS2</name>
<description>Output Idle state 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SMCR</name>
<displayName>SMCR</displayName>
<description>slave mode control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SMS</name>
<description>Slave mode selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TS_2_0</name>
<description>Trigger selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MSM</name>
<description>Master/Slave mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMS_3</name>
<description>Slave mode selection bit 3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TS_4_3</name>
<description>Trigger selection - bit
4:3</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIER</name>
<displayName>DIER</displayName>
<description>DMA/Interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UIE</name>
<description>Update interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IE</name>
<description>Capture/Compare 1 interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IE</name>
<description>Capture/Compare 2 interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIE</name>
<description>COM interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIE</name>
<description>Trigger interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIE</name>
<description>Break interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDE</name>
<description>Update DMA request enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1DE</name>
<description>Capture/Compare 1 DMA request
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2DE</name>
<description>Capture/Compare 2 DMA request
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMDE</name>
<description>COM DMA request enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDE</name>
<description>Trigger DMA request enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC2OF</name>
<description>Capture/compare 2 overcapture
flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1OF</name>
<description>Capture/Compare 1 overcapture
flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIF</name>
<description>Break interrupt flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIF</name>
<description>Trigger interrupt flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIF</name>
<description>COM interrupt flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IF</name>
<description>Capture/Compare 2 interrupt
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IF</name>
<description>Capture/compare 1 interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIF</name>
<description>Update interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EGR</name>
<displayName>EGR</displayName>
<description>event generation register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BG</name>
<description>Break generation</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TG</name>
<description>Trigger generation</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMG</name>
<description>Capture/Compare control update
generation</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2G</name>
<description>Capture/compare 2
generation</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1G</name>
<description>Capture/compare 1
generation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UG</name>
<description>Update generation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Output</name>
<displayName>CCMR1_Output</displayName>
<description>capture/compare mode register (output
mode)</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC1FE</name>
<description>Output Compare 1 fast
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1PE</name>
<description>Output Compare 1 preload
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M</name>
<description>Output Compare 1 mode</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CC2S</name>
<description>Capture/Compare 2
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC2FE</name>
<description>Output Compare 2 fast
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2PE</name>
<description>Output Compare 2 preload
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2M</name>
<description>Output Compare 2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC1M_3</name>
<description>Output Compare 1 mode bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2M_3</name>
<description>Output Compare 2 mode bit
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Input</name>
<displayName>CCMR1_Input</displayName>
<description>capture/compare mode register 1 (input
mode)</description>
<alternateRegister>CCMR1_Output</alternateRegister>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC2F</name>
<description>Input capture 2 filter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC2PSC</name>
<description>Input capture 2 prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC2S</name>
<description>Capture/Compare 2
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IC1F</name>
<description>Input capture 1 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC1PSC</name>
<description>Input capture 1 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCER</name>
<displayName>CCER</displayName>
<description>capture/compare enable
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC2NP</name>
<description>Capture/Compare 2 output
Polarity</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2P</name>
<description>Capture/Compare 2 output
Polarity</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2E</name>
<description>Capture/Compare 2 output
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NP</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NE</name>
<description>Capture/Compare 1 complementary output
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1P</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1E</name>
<description>Capture/Compare 1 output
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>counter</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UIFCPY</name>
<description>UIF copy</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PSC</name>
<displayName>PSC</displayName>
<description>prescaler</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>auto-reload register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Auto-reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<displayName>RCR</displayName>
<description>repetition counter register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>REP</name>
<description>Repetition counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<displayName>CCR1</displayName>
<description>capture/compare register 1</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR1</name>
<description>Capture/Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<displayName>CCR2</displayName>
<description>capture/compare register 2</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR2</name>
<description>Capture/Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDTR</name>
<displayName>BDTR</displayName>
<description>break and dead-time register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>MOE</name>
<description>Main output enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AOE</name>
<description>Automatic output enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKP</name>
<description>Break polarity</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKE</name>
<description>Break enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSSR</name>
<description>Off-state selection for Run
mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSSI</name>
<description>Off-state selection for Idle
mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock configuration</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DTG</name>
<description>Dead-time generator setup</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BKF</name>
<description>Break filter</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<displayName>DCR</displayName>
<description>DMA control register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DBL</name>
<description>DMA burst length</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DBA</name>
<description>DMA base address</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMAR</name>
<displayName>DMAR</displayName>
<description>DMA address for full transfer</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DMAB</name>
<description>DMA register for burst
accesses</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>AF1</name>
<displayName>AF1</displayName>
<description>TIM15 alternate fdfsdm1_breakon register
1</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BKINE</name>
<description>BRK BKIN input enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1E</name>
<description>BRK COMP1 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2E</name>
<description>BRK COMP2 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKDF1BK0E</name>
<description>BRK dfsdm1_break[0] enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKINP</name>
<description>BRK BKIN input polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1P</name>
<description>BRK COMP1 input polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2P</name>
<description>BRK COMP2 input polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TISEL</name>
<displayName>TISEL</displayName>
<description>TIM15 input selection register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TI1SEL</name>
<description>selects TI1[0] to TI1[15]
input</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI2SEL</name>
<description>selects TI2[0] to TI2[15]
input</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART1</name>
<description>Universal synchronous asynchronous receiver
transmitter</description>
<groupName>USART</groupName>
<baseAddress>0x40011000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>Control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RXFFIE</name>
<description>RXFIFO Full interrupt
enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFEIE</name>
<description>TXFIFO empty interrupt
enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FIFOEN</name>
<description>FIFO mode enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>M1</name>
<description>Word length</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOBIE</name>
<description>End of Block interrupt
enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTOIE</name>
<description>Receiver timeout interrupt
enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEAT4</name>
<description>Driver Enable assertion
time</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEAT3</name>
<description>DEAT3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEAT2</name>
<description>DEAT2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEAT1</name>
<description>DEAT1</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEAT0</name>
<description>DEAT0</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDT4</name>
<description>Driver Enable de-assertion
time</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDT3</name>
<description>DEDT3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDT2</name>
<description>DEDT2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDT1</name>
<description>DEDT1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEDT0</name>
<description>DEDT0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVER8</name>
<description>Oversampling mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMIE</name>
<description>Character match interrupt
enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MME</name>
<description>Mute mode enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>M0</name>
<description>Word length</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKE</name>
<description>Receiver wakeup method</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCE</name>
<description>Parity control enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PS</name>
<description>Parity selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEIE</name>
<description>PE interrupt enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEIE</name>
<description>interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transmission complete interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNEIE</name>
<description>RXNE interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLEIE</name>
<description>IDLE interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TE</name>
<description>Transmitter enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RE</name>
<description>Receiver enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UESM</name>
<description>USART enable in Stop mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UE</name>
<description>USART enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>Control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>ADD4_7</name>
<description>Address of the USART node</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ADD0_3</name>
<description>Address of the USART node</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RTOEN</name>
<description>Receiver timeout enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABRMOD1</name>
<description>Auto baud rate mode</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABRMOD0</name>
<description>ABRMOD0</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABREN</name>
<description>Auto baud rate enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSBFIRST</name>
<description>Most significant bit first</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAINV</name>
<description>Binary data inversion</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXINV</name>
<description>TX pin active level
inversion</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXINV</name>
<description>RX pin active level
inversion</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP</name>
<description>Swap TX/RX pins</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINEN</name>
<description>LIN mode enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOP</name>
<description>STOP bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CLKEN</name>
<description>Clock enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPOL</name>
<description>Clock polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPHA</name>
<description>Clock phase</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBCL</name>
<description>Last bit clock pulse</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBDIE</name>
<description>LIN break detection interrupt
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBDL</name>
<description>LIN break detection length</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDM7</name>
<description>7-bit Address Detection/4-bit Address
Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIS_NSS</name>
<description>When the DSI_NSS bit is set, the NSS pin
input is ignored</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLVEN</name>
<description>Synchronous Slave mode
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR3</name>
<displayName>CR3</displayName>
<description>Control register 3</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TXFTCFG</name>
<description>TXFIFO threshold
configuration</description>
<bitOffset>29</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RXFTIE</name>
<description>RXFIFO threshold interrupt
enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFTCFG</name>
<description>Receive FIFO threshold
configuration</description>
<bitOffset>25</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TCBGTIE</name>
<description>Transmission Complete before guard time,
interrupt enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFTIE</name>
<description>TXFIFO threshold interrupt
enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUFIE</name>
<description>Wakeup from Stop mode interrupt
enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUS</name>
<description>Wakeup from Stop mode interrupt flag
selection</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCARCNT</name>
<description>Smartcard auto-retry count</description>
<bitOffset>17</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DEP</name>
<description>Driver enable polarity
selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEM</name>
<description>Driver enable mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDRE</name>
<description>DMA Disable on Reception
Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRDIS</name>
<description>Overrun Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONEBIT</name>
<description>One sample bit method
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIE</name>
<description>CTS interrupt enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSE</name>
<description>CTS enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTSE</name>
<description>RTS enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAT</name>
<description>DMA enable transmitter</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAR</name>
<description>DMA enable receiver</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCEN</name>
<description>Smartcard mode enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NACK</name>
<description>Smartcard NACK enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HDSEL</name>
<description>Half-duplex selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IRLP</name>
<description>Ir low-power</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IREN</name>
<description>Ir mode enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIE</name>
<description>Error interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BRR</name>
<displayName>BRR</displayName>
<description>Baud rate register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BRR_4_15</name>
<description>DIV_Mantissa</description>
<bitOffset>4</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>BRR_0_3</name>
<description>DIV_Fraction</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>GTPR</name>
<displayName>GTPR</displayName>
<description>Guard time and prescaler
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>GT</name>
<description>Guard time value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<displayName>RTOR</displayName>
<description>Receiver timeout register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BLEN</name>
<description>Block Length</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RTO</name>
<description>Receiver timeout value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>RQR</name>
<displayName>RQR</displayName>
<description>Request register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TXFRQ</name>
<description>Transmit data flush
request</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFRQ</name>
<description>Receive data flush request</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMRQ</name>
<description>Mute mode request</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBKRQ</name>
<description>Send break request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABRRQ</name>
<description>Auto baud rate request</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>Interrupt & status
register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00C0</resetValue>
<fields>
<field>
<name>TXFT</name>
<description>TXFIFO threshold flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFT</name>
<description>RXFIFO threshold flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCBGT</name>
<description>Transmission complete before guard time
flag</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXFF</name>
<description>RXFIFO Full</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFE</name>
<description>TXFIFO Empty</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REACK</name>
<description>REACK</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEACK</name>
<description>TEACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUF</name>
<description>WUF</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RWU</name>
<description>RWU</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBKF</name>
<description>SBKF</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMF</name>
<description>CMF</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>BUSY</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABRF</name>
<description>ABRF</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABRE</name>
<description>ABRE</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDR</name>
<description>SPI slave underrun error
flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOBF</name>
<description>EOBF</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTOF</name>
<description>RTOF</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTS</name>
<description>CTS</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIF</name>
<description>CTSIF</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBDF</name>
<description>LBDF</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXE</name>
<description>TXE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC</name>
<description>TC</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNE</name>
<description>RXNE</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLE</name>
<description>IDLE</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ORE</name>
<description>ORE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NF</name>
<description>NF</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FE</name>
<description>FE</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PE</name>
<description>PE</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>Interrupt flag clear register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>WUCF</name>
<description>Wakeup from Stop mode clear
flag</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMCF</name>
<description>Character match clear flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDRCF</name>
<description>SPI slave underrun clear
flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOBCF</name>
<description>End of block clear flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTOCF</name>
<description>Receiver timeout clear
flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSCF</name>
<description>CTS clear flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LBDCF</name>
<description>LIN break detection clear
flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCBGTC</name>
<description>Transmission complete before Guard time
clear flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCCF</name>
<description>Transmission complete clear
flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXFECF</name>
<description>TXFIFO empty clear flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDLECF</name>
<description>Idle line detected clear
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ORECF</name>
<description>Overrun error clear flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NCF</name>
<description>Noise detected clear flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FECF</name>
<description>Framing error clear flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PECF</name>
<description>Parity error clear flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<displayName>RDR</displayName>
<description>Receive data register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RDR</name>
<description>Receive data value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<displayName>TDR</displayName>
<description>Transmit data register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TDR</name>
<description>Transmit data value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRESC</name>
<displayName>PRESC</displayName>
<description>USART prescaler register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PRESCALER</name>
<description>Clock prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="USART1">
<name>USART2</name>
<baseAddress>0x40004400</baseAddress>
<interrupt>
<name>USART1</name>
<description>USART1 global interrupt</description>
<value>37</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="USART1">
<name>USART3</name>
<baseAddress>0x40004800</baseAddress>
<interrupt>
<name>USART2</name>
<description>USART2 global interrupt</description>
<value>38</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="USART1">
<name>UART4</name>
<baseAddress>0x40004C00</baseAddress>
<interrupt>
<name>USART3</name>
<description>USART3 global interrupt</description>
<value>39</value>
</interrupt>
<interrupt>
<name>UART4</name>
<description>UART4 global interrupt</description>
<value>52</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="USART1">
<name>UART5</name>
<baseAddress>0x40005000</baseAddress>
<interrupt>
<name>UART5</name>
<description>UART5 global interrupt</description>
<value>53</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="USART1">
<name>USART6</name>
<baseAddress>0x40011400</baseAddress>
<interrupt>
<name>USART6</name>
<description>USART6 global interrupt</description>
<value>71</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="USART1">
<name>UART7</name>
<baseAddress>0x40007800</baseAddress>
<interrupt>
<name>UART7</name>
<description>UART7 global interrupt</description>
<value>82</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="USART1">
<name>UART8</name>
<baseAddress>0x40007C00</baseAddress>
<interrupt>
<name>UART8</name>
<description>UART8 global interrupt</description>
<value>83</value>
</interrupt>
</peripheral>
<peripheral>
<name>TIM1</name>
<description>Advanced-timers</description>
<groupName>TIM</groupName>
<baseAddress>0x40010000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TIM1_BRK</name>
<description>TIM1 break interrupt</description>
<value>24</value>
</interrupt>
<interrupt>
<name>TIM1_UP</name>
<description>TIM1 update interrupt</description>
<value>25</value>
</interrupt>
<interrupt>
<name>TIM1_TRG_COM</name>
<description>TIM1 trigger and commutation</description>
<value>26</value>
</interrupt>
<interrupt>
<name>TIM_CC</name>
<description>TIM1 capture / compare</description>
<value>27</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Counter enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDIS</name>
<description>Update disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>URS</name>
<description>Update request source</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPM</name>
<description>One-pulse mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Direction</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMS</name>
<description>Center-aligned mode
selection</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ARPE</name>
<description>Auto-reload preload enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKD</name>
<description>Clock division</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>UIFREMAP</name>
<description>UIF status bit remapping</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>MMS2</name>
<description>Master mode selection 2</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>OIS6</name>
<description>Output Idle state 6</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS5</name>
<description>Output Idle state 5</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS4</name>
<description>Output Idle state 4</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS3N</name>
<description>Output Idle state 3</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS3</name>
<description>Output Idle state 3</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS2N</name>
<description>Output Idle state 2</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS2</name>
<description>Output Idle state 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS1N</name>
<description>Output Idle state 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OIS1</name>
<description>Output Idle state 1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TI1S</name>
<description>TI1 selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMS</name>
<description>Master mode selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CCDS</name>
<description>Capture/compare DMA
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCUS</name>
<description>Capture/compare control update
selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCPC</name>
<description>Capture/compare preloaded
control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SMCR</name>
<displayName>SMCR</displayName>
<description>slave mode control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SMS</name>
<description>Slave mode selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TS</name>
<description>Trigger selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MSM</name>
<description>Master/Slave mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETF</name>
<description>External trigger filter</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ETPS</name>
<description>External trigger prescaler</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ECE</name>
<description>External clock enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETP</name>
<description>External trigger polarity</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMS_3</name>
<description>Slave mode selection - bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TS_4_3</name>
<description>Trigger selection - bit
4:3</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIER</name>
<displayName>DIER</displayName>
<description>DMA/Interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TDE</name>
<description>Trigger DMA request enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMDE</name>
<description>COM DMA request enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4DE</name>
<description>Capture/Compare 4 DMA request
enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3DE</name>
<description>Capture/Compare 3 DMA request
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2DE</name>
<description>Capture/Compare 2 DMA request
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1DE</name>
<description>Capture/Compare 1 DMA request
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDE</name>
<description>Update DMA request enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIE</name>
<description>Trigger interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4IE</name>
<description>Capture/Compare 4 interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3IE</name>
<description>Capture/Compare 3 interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IE</name>
<description>Capture/Compare 2 interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IE</name>
<description>Capture/Compare 1 interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIE</name>
<description>Update interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIE</name>
<description>Break interrupt enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIE</name>
<description>COM interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC6IF</name>
<description>Compare 6 interrupt flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC5IF</name>
<description>Compare 5 interrupt flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBIF</name>
<description>System Break interrupt
flag</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4OF</name>
<description>Capture/Compare 4 overcapture
flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3OF</name>
<description>Capture/Compare 3 overcapture
flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2OF</name>
<description>Capture/compare 2 overcapture
flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1OF</name>
<description>Capture/Compare 1 overcapture
flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2IF</name>
<description>Break 2 interrupt flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BIF</name>
<description>Break interrupt flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIF</name>
<description>Trigger interrupt flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMIF</name>
<description>COM interrupt flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4IF</name>
<description>Capture/Compare 4 interrupt
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3IF</name>
<description>Capture/Compare 3 interrupt
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IF</name>
<description>Capture/Compare 2 interrupt
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IF</name>
<description>Capture/compare 1 interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIF</name>
<description>Update interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EGR</name>
<displayName>EGR</displayName>
<description>event generation register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UG</name>
<description>Update generation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1G</name>
<description>Capture/compare 1
generation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2G</name>
<description>Capture/compare 2
generation</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3G</name>
<description>Capture/compare 3
generation</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4G</name>
<description>Capture/compare 4
generation</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMG</name>
<description>Capture/Compare control update
generation</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TG</name>
<description>Trigger generation</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BG</name>
<description>Break generation</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B2G</name>
<description>Break 2 generation</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Output</name>
<displayName>CCMR1_Output</displayName>
<description>capture/compare mode register 1 (output
mode)</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC1FE</name>
<description>Output Compare 1 fast
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1PE</name>
<description>Output Compare 1 preload
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M</name>
<description>Output Compare 1 mode</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC1CE</name>
<description>Output Compare 1 clear
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2S</name>
<description>Capture/Compare 2
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC2FE</name>
<description>Output Compare 2 fast
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2PE</name>
<description>Output Compare 2 preload
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2M</name>
<description>Output Compare 2 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC2CE</name>
<description>Output Compare 2 clear
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M_3</name>
<description>Output Compare 1 mode - bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2M_3</name>
<description>Output Compare 2 mode - bit
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Input</name>
<displayName>CCMR1_Input</displayName>
<description>capture/compare mode register 1 (input
mode)</description>
<alternateRegister>CCMR1_Output</alternateRegister>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC2F</name>
<description>Input capture 2 filter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC2PCS</name>
<description>Input capture 2 prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC2S</name>
<description>Capture/Compare 2
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IC1F</name>
<description>Input capture 1 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ICPCS</name>
<description>Input capture 1 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR2_Output</name>
<displayName>CCMR2_Output</displayName>
<description>capture/compare mode register 2 (output
mode)</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC3S</name>
<description>Capture/Compare 3
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC3FE</name>
<description>Output compare 3 fast
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC3PE</name>
<description>Output compare 3 preload
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC3M</name>
<description>Output compare 3 mode</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC3CE</name>
<description>Output compare 3 clear
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4S</name>
<description>Capture/Compare 4
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC4FE</name>
<description>Output compare 4 fast
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC4PE</name>
<description>Output compare 4 preload
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC4M</name>
<description>Output compare 4 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC4CE</name>
<description>Output compare 4 clear
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC3M_3</name>
<description>Output Compare 3 mode - bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC4M_4</name>
<description>Output Compare 4 mode - bit
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR2_Input</name>
<displayName>CCMR2_Input</displayName>
<description>capture/compare mode register 2 (input
mode)</description>
<alternateRegister>CCMR2_Output</alternateRegister>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC4F</name>
<description>Input capture 4 filter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC4PSC</name>
<description>Input capture 4 prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC4S</name>
<description>Capture/Compare 4
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IC3F</name>
<description>Input capture 3 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC3PSC</name>
<description>Input capture 3 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC3S</name>
<description>Capture/compare 3
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCER</name>
<displayName>CCER</displayName>
<description>capture/compare enable
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC1E</name>
<description>Capture/Compare 1 output
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1P</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NE</name>
<description>Capture/Compare 1 complementary output
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NP</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2E</name>
<description>Capture/Compare 2 output
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2P</name>
<description>Capture/Compare 2 output
Polarity</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2NE</name>
<description>Capture/Compare 2 complementary output
enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2NP</name>
<description>Capture/Compare 2 output
Polarity</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3E</name>
<description>Capture/Compare 3 output
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3P</name>
<description>Capture/Compare 3 output
Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3NE</name>
<description>Capture/Compare 3 complementary output
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3NP</name>
<description>Capture/Compare 3 output
Polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4E</name>
<description>Capture/Compare 4 output
enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4P</name>
<description>Capture/Compare 3 output
Polarity</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4NP</name>
<description>Capture/Compare 4 complementary output
polarity</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC5E</name>
<description>Capture/Compare 5 output
enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC5P</name>
<description>Capture/Compare 5 output
polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC6E</name>
<description>Capture/Compare 6 output
enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC6P</name>
<description>Capture/Compare 6 output
polarity</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>counter</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UIFCPY</name>
<description>UIF copy</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PSC</name>
<displayName>PSC</displayName>
<description>prescaler</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>auto-reload register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Auto-reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<displayName>CCR1</displayName>
<description>capture/compare register 1</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR1</name>
<description>Capture/Compare 1 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<displayName>CCR2</displayName>
<description>capture/compare register 2</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR2</name>
<description>Capture/Compare 2 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR3</name>
<displayName>CCR3</displayName>
<description>capture/compare register 3</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR3</name>
<description>Capture/Compare value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR4</name>
<displayName>CCR4</displayName>
<description>capture/compare register 4</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR4</name>
<description>Capture/Compare value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<displayName>DCR</displayName>
<description>DMA control register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DBL</name>
<description>DMA burst length</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DBA</name>
<description>DMA base address</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMAR</name>
<displayName>DMAR</displayName>
<description>DMA address for full transfer</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DMAB</name>
<description>DMA register for burst
accesses</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<displayName>RCR</displayName>
<description>repetition counter register</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>REP</name>
<description>Repetition counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDTR</name>
<displayName>BDTR</displayName>
<description>break and dead-time register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DTG</name>
<description>Dead-time generator setup</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>Lock configuration</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OSSI</name>
<description>Off-state selection for Idle
mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSSR</name>
<description>Off-state selection for Run
mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKE</name>
<description>Break enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKP</name>
<description>Break polarity</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AOE</name>
<description>Automatic output enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MOE</name>
<description>Main output enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKF</name>
<description>Break filter</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BK2F</name>
<description>Break 2 filter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>BK2E</name>
<description>Break 2 enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2P</name>
<description>Break 2 polarity</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR3_Output</name>
<displayName>CCMR3_Output</displayName>
<description>capture/compare mode register 3 (output
mode)</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>OC5FE</name>
<description>Output compare 5 fast
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC5PE</name>
<description>Output compare 5 preload
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC5M</name>
<description>Output compare 5 mode</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC5CE</name>
<description>Output compare 5 clear
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC6FE</name>
<description>Output compare 6 fast
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC6PE</name>
<description>Output compare 6 preload
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC6M</name>
<description>Output compare 6 mode</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC6CE</name>
<description>Output compare 6 clear
enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC5M3</name>
<description>Output Compare 5 mode</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC6M3</name>
<description>Output Compare 6 mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR5</name>
<displayName>CCR5</displayName>
<description>capture/compare register 5</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CCR5</name>
<description>Capture/Compare 5 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>GC5C1</name>
<description>Group Channel 5 and Channel
1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GC5C2</name>
<description>Group Channel 5 and Channel
2</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GC5C3</name>
<description>Group Channel 5 and Channel
3</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR6</name>
<displayName>CCR6</displayName>
<description>capture/compare register 6</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CCR6</name>
<description>Capture/Compare 6 value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>AF1</name>
<displayName>AF1</displayName>
<description>TIM1 alternate function option register
1</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BKINE</name>
<description>BRK BKIN input enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1E</name>
<description>BRK COMP1 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2E</name>
<description>BRK COMP2 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKDF1BK0E</name>
<description>BRK dfsdm1_break[0] enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKINP</name>
<description>BRK BKIN input polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP1P</name>
<description>BRK COMP1 input polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKCMP2P</name>
<description>BRK COMP2 input polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETRSEL</name>
<description>ETR source selection</description>
<bitOffset>14</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>AF2</name>
<displayName>AF2</displayName>
<description>TIM1 Alternate function odfsdm1_breakster
2</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BK2INE</name>
<description>BRK2 BKIN input enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2CMP1E</name>
<description>BRK2 COMP1 enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2CMP2E</name>
<description>BRK2 COMP2 enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2DF1BK1E</name>
<description>BRK2 dfsdm1_break[1]
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2INP</name>
<description>BRK2 BKIN2 input polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2CMP1P</name>
<description>BRK2 COMP1 input polarit</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK2CMP2P</name>
<description>BRK2 COMP2 input polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TISEL</name>
<displayName>TISEL</displayName>
<description>TIM1 timer input selection
register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TI1SEL</name>
<description>selects TI1[0] to TI1[15]
input</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI2SEL</name>
<description>selects TI2[0] to TI2[15]
input</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI3SEL</name>
<description>selects TI3[0] to TI3[15]
input</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI4SEL</name>
<description>selects TI4[0] to TI4[15]
input</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="TIM1">
<name>TIM8</name>
<baseAddress>0x40010400</baseAddress>
<interrupt>
<name>TIM8_BRK_TIM12</name>
<description>TIM8 break and TIM12 global interrupts</description>
<value>43</value>
</interrupt>
<interrupt>
<name>TIM8_UP_TIM13</name>
<description>TIM8 update and TIM13 global interrupts</description>
<value>44</value>
</interrupt>
<interrupt>
<name>TIM8_TRG_COM_TIM14</name>
<description>TIM8 trigger /commutation and TIM14 global interrupts</description>
<value>45</value>
</interrupt>
<interrupt>
<name>TIM8_CC</name>
<description>TIM8 capture / compare</description>
<value>46</value>
</interrupt>
</peripheral>
<peripheral>
<name>FDCAN1</name>
<description>FDCAN1</description>
<groupName>FDCAN</groupName>
<baseAddress>0x4000A000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>FDCAN1_IT0</name>
<description>FDCAN1 Interrupt 0</description>
<value>19</value>
</interrupt>
<interrupt>
<name>FDCAN1_IT1</name>
<description>FDCAN1 Interrupt 1</description>
<value>21</value>
</interrupt>
<interrupt>
<name>FDCAN_CAL</name>
<description>CAN2TX interrupts</description>
<value>63</value>
</interrupt>
<registers>
<register>
<name>FDCAN_CREL</name>
<displayName>FDCAN_CREL</displayName>
<description>FDCAN Core Release Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REL</name>
<description>Core release</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>STEP</name>
<description>Step of Core release</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SUBSTEP</name>
<description>Sub-step of Core release</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Timestamp Year</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MON</name>
<description>Timestamp Month</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DAY</name>
<description>Timestamp Day</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_ENDN</name>
<displayName>FDCAN_ENDN</displayName>
<description>FDCAN Core Release Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ETV</name>
<description>Endiannes Test Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_DBTP</name>
<displayName>FDCAN_DBTP</displayName>
<description>FDCAN Data Bit Timing and Prescaler
Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSJW</name>
<description>Synchronization Jump Width</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DTSEG2</name>
<description>Data time segment after sample
point</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DTSEG1</name>
<description>Data time segment after sample
point</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DBRP</name>
<description>Data BIt Rate Prescaler</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TDC</name>
<description>Transceiver Delay
Compensation</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TEST</name>
<displayName>FDCAN_TEST</displayName>
<description>FDCAN Test Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LBCK</name>
<description>Loop Back mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TX</name>
<description>Loop Back mode</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RX</name>
<description>Control of Transmit Pin</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RWD</name>
<displayName>FDCAN_RWD</displayName>
<description>FDCAN RAM Watchdog Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDV</name>
<description>Watchdog value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>WDC</name>
<description>Watchdog configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_CCCR</name>
<displayName>FDCAN_CCCR</displayName>
<description>FDCAN CC Control Register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INIT</name>
<description>Initialization</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCE</name>
<description>Configuration Change
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASM</name>
<description>ASM Restricted Operation
Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSA</name>
<description>Clock Stop Acknowledge</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSR</name>
<description>Clock Stop Request</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MON</name>
<description>Bus Monitoring Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAR</name>
<description>Disable Automatic
Retransmission</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEST</name>
<description>Test Mode Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDOE</name>
<description>FD Operation Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BSE</name>
<description>FDCAN Bit Rate Switching</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PXHD</name>
<description>Protocol Exception Handling
Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EFBI</name>
<description>Edge Filtering during Bus
Integration</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXP</name>
<description>TXP</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NISO</name>
<description>Non ISO Operation</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_NBTP</name>
<displayName>FDCAN_NBTP</displayName>
<description>FDCAN Nominal Bit Timing and Prescaler
Register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NSJW</name>
<description>NSJW: Nominal (Re)Synchronization Jump
Width</description>
<bitOffset>25</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>NBRP</name>
<description>Bit Rate Prescaler</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>NTSEG1</name>
<description>Nominal Time segment before sample
point</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>TSEG2</name>
<description>Nominal Time segment after sample
point</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TSCC</name>
<displayName>FDCAN_TSCC</displayName>
<description>FDCAN Timestamp Counter Configuration
Register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCP</name>
<description>Timestamp Counter
Prescaler</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TSS</name>
<description>Timestamp Select</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TSCV</name>
<displayName>FDCAN_TSCV</displayName>
<description>FDCAN Timestamp Counter Value
Register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSC</name>
<description>Timestamp Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TOCC</name>
<displayName>FDCAN_TOCC</displayName>
<description>FDCAN Timeout Counter Configuration
Register</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ETOC</name>
<description>Enable Timeout Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOS</name>
<description>Timeout Select</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TOP</name>
<description>Timeout Period</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TOCV</name>
<displayName>FDCAN_TOCV</displayName>
<description>FDCAN Timeout Counter Value
Register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TOC</name>
<description>Timeout Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_ECR</name>
<displayName>FDCAN_ECR</displayName>
<description>FDCAN Error Counter Register</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEL</name>
<description>AN Error Logging</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>RP</name>
<description>Receive Error Passive</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TREC</name>
<description>Receive Error Counter</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TEC</name>
<description>Transmit Error Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_PSR</name>
<displayName>FDCAN_PSR</displayName>
<description>FDCAN Protocol Status Register</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LEC</name>
<description>Last Error Code</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>ACT</name>
<description>Activity</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EP</name>
<description>Error Passive</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EW</name>
<description>Warning Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BO</name>
<description>Bus_Off Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DLEC</name>
<description>Data Last Error Code</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RESI</name>
<description>ESI flag of last received FDCAN
Message</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RBRS</name>
<description>BRS flag of last received FDCAN
Message</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REDL</name>
<description>Received FDCAN Message</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PXE</name>
<description>Protocol Exception Event</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCV</name>
<description>Transmitter Delay Compensation
Value</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TDCR</name>
<displayName>FDCAN_TDCR</displayName>
<description>FDCAN Transmitter Delay Compensation
Register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TDCF</name>
<description>Transmitter Delay Compensation Filter
Window Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>TDCO</name>
<description>Transmitter Delay Compensation
Offset</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_IR</name>
<displayName>FDCAN_IR</displayName>
<description>FDCAN Interrupt Register</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RF0N</name>
<description>Rx FIFO 0 New Message</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0W</name>
<description>Rx FIFO 0 Full</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0F</name>
<description>Rx FIFO 0 Full</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0L</name>
<description>Rx FIFO 0 Message Lost</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1N</name>
<description>Rx FIFO 1 New Message</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1W</name>
<description>Rx FIFO 1 Watermark
Reached</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1F</name>
<description>Rx FIFO 1 Watermark
Reached</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1L</name>
<description>Rx FIFO 1 Message Lost</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPM</name>
<description>High Priority Message</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC</name>
<description>Transmission Completed</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCF</name>
<description>Transmission Cancellation
Finished</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEF</name>
<description>Tx FIFO Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFN</name>
<description>Tx Event FIFO New Entry</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFW</name>
<description>Tx Event FIFO Watermark
Reached</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFF</name>
<description>Tx Event FIFO Full</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFL</name>
<description>Tx Event FIFO Element Lost</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSW</name>
<description>Timestamp Wraparound</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MRAF</name>
<description>Message RAM Access Failure</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOO</name>
<description>Timeout Occurred</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRX</name>
<description>Message stored to Dedicated Rx
Buffer</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ELO</name>
<description>Error Logging Overflow</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EP</name>
<description>Error Passive</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EW</name>
<description>Warning Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BO</name>
<description>Bus_Off Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDI</name>
<description>Watchdog Interrupt</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEA</name>
<description>Protocol Error in Arbitration Phase
(Nominal Bit Time is used)</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PED</name>
<description>Protocol Error in Data Phase (Data Bit
Time is used)</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARA</name>
<description>Access to Reserved Address</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_IE</name>
<displayName>FDCAN_IE</displayName>
<description>FDCAN Interrupt Enable
Register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RF0NE</name>
<description>Rx FIFO 0 New Message
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0WE</name>
<description>Rx FIFO 0 Full Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0FE</name>
<description>Rx FIFO 0 Full Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0LE</name>
<description>Rx FIFO 0 Message Lost
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1NE</name>
<description>Rx FIFO 1 New Message
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1WE</name>
<description>Rx FIFO 1 Watermark Reached
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1FE</name>
<description>Rx FIFO 1 Watermark Reached
Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1LE</name>
<description>Rx FIFO 1 Message Lost
Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPME</name>
<description>High Priority Message
Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCE</name>
<description>Transmission Completed
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCFE</name>
<description>Transmission Cancellation Finished
Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFE</name>
<description>Tx FIFO Empty Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFNE</name>
<description>Tx Event FIFO New Entry
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFWE</name>
<description>Tx Event FIFO Watermark Reached
Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFFE</name>
<description>Tx Event FIFO Full Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFLE</name>
<description>Tx Event FIFO Element Lost
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSWE</name>
<description>Timestamp Wraparound
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MRAFE</name>
<description>Message RAM Access Failure
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOOE</name>
<description>Timeout Occurred Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRXE</name>
<description>Message stored to Dedicated Rx Buffer
Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BECE</name>
<description>Bit Error Corrected Interrupt
Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BEUE</name>
<description>Bit Error Uncorrected Interrupt
Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ELOE</name>
<description>Error Logging Overflow
Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPE</name>
<description>Error Passive Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EWE</name>
<description>Warning Status Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOE</name>
<description>Bus_Off Status Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDIE</name>
<description>Watchdog Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEAE</name>
<description>Protocol Error in Arbitration Phase
Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEDE</name>
<description>Protocol Error in Data Phase
Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARAE</name>
<description>Access to Reserved Address
Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_ILS</name>
<displayName>FDCAN_ILS</displayName>
<description>FDCAN Interrupt Line Select
Register</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RF0NL</name>
<description>Rx FIFO 0 New Message Interrupt
Line</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0WL</name>
<description>Rx FIFO 0 Watermark Reached Interrupt
Line</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0FL</name>
<description>Rx FIFO 0 Full Interrupt
Line</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0LL</name>
<description>Rx FIFO 0 Message Lost Interrupt
Line</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1NL</name>
<description>Rx FIFO 1 New Message Interrupt
Line</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1WL</name>
<description>Rx FIFO 1 Watermark Reached Interrupt
Line</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1FL</name>
<description>Rx FIFO 1 Full Interrupt
Line</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1LL</name>
<description>Rx FIFO 1 Message Lost Interrupt
Line</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPML</name>
<description>High Priority Message Interrupt
Line</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCL</name>
<description>Transmission Completed Interrupt
Line</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCFL</name>
<description>Transmission Cancellation Finished
Interrupt Line</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFL</name>
<description>Tx FIFO Empty Interrupt
Line</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFNL</name>
<description>Tx Event FIFO New Entry Interrupt
Line</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFWL</name>
<description>Tx Event FIFO Watermark Reached
Interrupt Line</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFFL</name>
<description>Tx Event FIFO Full Interrupt
Line</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFLL</name>
<description>Tx Event FIFO Element Lost Interrupt
Line</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSWL</name>
<description>Timestamp Wraparound Interrupt
Line</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MRAFL</name>
<description>Message RAM Access Failure Interrupt
Line</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TOOL</name>
<description>Timeout Occurred Interrupt
Line</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRXL</name>
<description>Message stored to Dedicated Rx Buffer
Interrupt Line</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BECL</name>
<description>Bit Error Corrected Interrupt
Line</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BEUL</name>
<description>Bit Error Uncorrected Interrupt
Line</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ELOL</name>
<description>Error Logging Overflow Interrupt
Line</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPL</name>
<description>Error Passive Interrupt
Line</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EWL</name>
<description>Warning Status Interrupt
Line</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOL</name>
<description>Bus_Off Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDIL</name>
<description>Watchdog Interrupt Line</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEAL</name>
<description>Protocol Error in Arbitration Phase
Line</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEDL</name>
<description>Protocol Error in Data Phase
Line</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARAL</name>
<description>Access to Reserved Address
Line</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_ILE</name>
<displayName>FDCAN_ILE</displayName>
<description>FDCAN Interrupt Line Enable
Register</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EINT0</name>
<description>Enable Interrupt Line 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EINT1</name>
<description>Enable Interrupt Line 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_GFC</name>
<displayName>FDCAN_GFC</displayName>
<description>FDCAN Global Filter Configuration
Register</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RRFE</name>
<description>Reject Remote Frames
Extended</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RRFS</name>
<description>Reject Remote Frames
Standard</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ANFE</name>
<description>Accept Non-matching Frames
Extended</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ANFS</name>
<description>Accept Non-matching Frames
Standard</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_SIDFC</name>
<displayName>FDCAN_SIDFC</displayName>
<description>FDCAN Standard ID Filter Configuration
Register</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLSSA</name>
<description>Filter List Standard Start
Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>LSS</name>
<description>List Size Standard</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_XIDFC</name>
<displayName>FDCAN_XIDFC</displayName>
<description>FDCAN Extended ID Filter Configuration
Register</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLESA</name>
<description>Filter List Standard Start
Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>LSE</name>
<description>List Size Extended</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_XIDAM</name>
<displayName>FDCAN_XIDAM</displayName>
<description>FDCAN Extended ID and Mask
Register</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EIDM</name>
<description>Extended ID Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>29</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_HPMS</name>
<displayName>FDCAN_HPMS</displayName>
<description>FDCAN High Priority Message Status
Register</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BIDX</name>
<description>Buffer Index</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MSI</name>
<description>Message Storage Indicator</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FIDX</name>
<description>Filter Index</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>FLST</name>
<description>Filter List</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_NDAT1</name>
<displayName>FDCAN_NDAT1</displayName>
<description>FDCAN New Data 1 Register</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ND0</name>
<description>New data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND1</name>
<description>New data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND2</name>
<description>New data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND3</name>
<description>New data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND4</name>
<description>New data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND5</name>
<description>New data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND6</name>
<description>New data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND7</name>
<description>New data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND8</name>
<description>New data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND9</name>
<description>New data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND10</name>
<description>New data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND11</name>
<description>New data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND12</name>
<description>New data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND13</name>
<description>New data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND14</name>
<description>New data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND15</name>
<description>New data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND16</name>
<description>New data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND17</name>
<description>New data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND18</name>
<description>New data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND19</name>
<description>New data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND20</name>
<description>New data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND21</name>
<description>New data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND22</name>
<description>New data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND23</name>
<description>New data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND24</name>
<description>New data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND25</name>
<description>New data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND26</name>
<description>New data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND27</name>
<description>New data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND28</name>
<description>New data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND29</name>
<description>New data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND30</name>
<description>New data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND31</name>
<description>New data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_NDAT2</name>
<displayName>FDCAN_NDAT2</displayName>
<description>FDCAN New Data 2 Register</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ND32</name>
<description>New data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND33</name>
<description>New data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND34</name>
<description>New data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND35</name>
<description>New data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND36</name>
<description>New data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND37</name>
<description>New data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND38</name>
<description>New data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND39</name>
<description>New data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND40</name>
<description>New data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND41</name>
<description>New data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND42</name>
<description>New data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND43</name>
<description>New data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND44</name>
<description>New data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND45</name>
<description>New data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND46</name>
<description>New data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND47</name>
<description>New data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND48</name>
<description>New data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND49</name>
<description>New data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND50</name>
<description>New data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND51</name>
<description>New data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND52</name>
<description>New data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND53</name>
<description>New data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND54</name>
<description>New data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND55</name>
<description>New data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND56</name>
<description>New data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND57</name>
<description>New data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND58</name>
<description>New data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND59</name>
<description>New data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND60</name>
<description>New data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND61</name>
<description>New data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND62</name>
<description>New data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ND63</name>
<description>New data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXF0C</name>
<displayName>FDCAN_RXF0C</displayName>
<description>FDCAN Rx FIFO 0 Configuration
Register</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>F0SA</name>
<description>Rx FIFO 0 Start Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>F0S</name>
<description>Rx FIFO 0 Size</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>F0WM</name>
<description>FIFO 0 Watermark</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXF0S</name>
<displayName>FDCAN_RXF0S</displayName>
<description>FDCAN Rx FIFO 0 Status
Register</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>F0FL</name>
<description>Rx FIFO 0 Fill Level</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>F0G</name>
<description>Rx FIFO 0 Get Index</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>F0P</name>
<description>Rx FIFO 0 Put Index</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>F0F</name>
<description>Rx FIFO 0 Full</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF0L</name>
<description>Rx FIFO 0 Message Lost</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXF0A</name>
<displayName>FDCAN_RXF0A</displayName>
<description>CAN Rx FIFO 0 Acknowledge
Register</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FA01</name>
<description>Rx FIFO 0 Acknowledge
Index</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXBC</name>
<displayName>FDCAN_RXBC</displayName>
<description>FDCAN Rx Buffer Configuration
Register</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RBSA</name>
<description>Rx Buffer Start Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXF1C</name>
<displayName>FDCAN_RXF1C</displayName>
<description>FDCAN Rx FIFO 1 Configuration
Register</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>F1SA</name>
<description>Rx FIFO 1 Start Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>F1S</name>
<description>Rx FIFO 1 Size</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>F1WM</name>
<description>Rx FIFO 1 Watermark</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXF1S</name>
<displayName>FDCAN_RXF1S</displayName>
<description>FDCAN Rx FIFO 1 Status
Register</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>F1FL</name>
<description>Rx FIFO 1 Fill Level</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>F1GI</name>
<description>Rx FIFO 1 Get Index</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>F1PI</name>
<description>Rx FIFO 1 Put Index</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>F1F</name>
<description>Rx FIFO 1 Full</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RF1L</name>
<description>Rx FIFO 1 Message Lost</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMS</name>
<description>Debug Message Status</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXF1A</name>
<displayName>FDCAN_RXF1A</displayName>
<description>FDCAN Rx FIFO 1 Acknowledge
Register</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>F1AI</name>
<description>Rx FIFO 1 Acknowledge
Index</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_RXESC</name>
<displayName>FDCAN_RXESC</displayName>
<description>FDCAN Rx Buffer Element Size Configuration
Register</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>F0DS</name>
<description>Rx FIFO 1 Data Field Size:</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>F1DS</name>
<description>Rx FIFO 0 Data Field Size:</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RBDS</name>
<description>Rx Buffer Data Field Size:</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBC</name>
<displayName>FDCAN_TXBC</displayName>
<description>FDCAN Tx Buffer Configuration
Register</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TBSA</name>
<description>Tx Buffers Start Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>NDTB</name>
<description>Number of Dedicated Transmit
Buffers</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>TFQS</name>
<description>Transmit FIFO/Queue Size</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>TFQM</name>
<description>Tx FIFO/Queue Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXFQS</name>
<displayName>FDCAN_TXFQS</displayName>
<description>FDCAN Tx FIFO/Queue Status
Register</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TFFL</name>
<description>Tx FIFO Free Level</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>TFGI</name>
<description>TFGI</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TFQPI</name>
<description>Tx FIFO/Queue Put Index</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TFQF</name>
<description>Tx FIFO/Queue Full</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXESC</name>
<displayName>FDCAN_TXESC</displayName>
<description>FDCAN Tx Buffer Element Size Configuration
Register</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TBDS</name>
<description>Tx Buffer Data Field Size:</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBRP</name>
<displayName>FDCAN_TXBRP</displayName>
<description>FDCAN Tx Buffer Request Pending
Register</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRP</name>
<description>Transmission Request
Pending</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBAR</name>
<displayName>FDCAN_TXBAR</displayName>
<description>FDCAN Tx Buffer Add Request
Register</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AR</name>
<description>Add Request</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBCR</name>
<displayName>FDCAN_TXBCR</displayName>
<description>FDCAN Tx Buffer Cancellation Request
Register</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CR</name>
<description>Cancellation Request</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBTO</name>
<displayName>FDCAN_TXBTO</displayName>
<description>FDCAN Tx Buffer Transmission Occurred
Register</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Transmission Occurred.</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBCF</name>
<displayName>FDCAN_TXBCF</displayName>
<description>FDCAN Tx Buffer Cancellation Finished
Register</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CF</name>
<description>Cancellation Finished</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBTIE</name>
<displayName>FDCAN_TXBTIE</displayName>
<description>FDCAN Tx Buffer Transmission Interrupt
Enable Register</description>
<addressOffset>0xE0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TIE</name>
<description>Transmission Interrupt
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXBCIE</name>
<displayName>FDCAN_TXBCIE</displayName>
<description>FDCAN Tx Buffer Cancellation Finished
Interrupt Enable Register</description>
<addressOffset>0xE4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CF</name>
<description>Cancellation Finished Interrupt
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXEFC</name>
<displayName>FDCAN_TXEFC</displayName>
<description>FDCAN Tx Event FIFO Configuration
Register</description>
<addressOffset>0xF0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EFSA</name>
<description>Event FIFO Start Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>EFS</name>
<description>Event FIFO Size</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>EFWM</name>
<description>Event FIFO Watermark</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXEFS</name>
<displayName>FDCAN_TXEFS</displayName>
<description>FDCAN Tx Event FIFO Status
Register</description>
<addressOffset>0xF4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EFFL</name>
<description>Event FIFO Fill Level</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>EFGI</name>
<description>Event FIFO Get Index.</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EFPI</name>
<description>Event FIFO put index.</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EFF</name>
<description>Event FIFO Full.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEFL</name>
<description>Tx Event FIFO Element
Lost.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TXEFA</name>
<displayName>FDCAN_TXEFA</displayName>
<description>FDCAN Tx Event FIFO Acknowledge
Register</description>
<addressOffset>0xF8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EFAI</name>
<description>Event FIFO Acknowledge
Index</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTTMC</name>
<displayName>FDCAN_TTTMC</displayName>
<description>FDCAN TT Trigger Memory Configuration
Register</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TMSA</name>
<description>Trigger Memory Start
Address</description>
<bitOffset>2</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>TME</name>
<description>Trigger Memory Elements</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTRMC</name>
<displayName>FDCAN_TTRMC</displayName>
<description>FDCAN TT Reference Message Configuration
Register</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RID</name>
<description>Reference Identifier.</description>
<bitOffset>0</bitOffset>
<bitWidth>29</bitWidth>
</field>
<field>
<name>XTD</name>
<description>Extended Identifier</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RMPS</name>
<description>Reference Message Payload
Select</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTOCF</name>
<displayName>FDCAN_TTOCF</displayName>
<description>FDCAN TT Operation Configuration
Register</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OM</name>
<description>Operation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GEN</name>
<description>Gap Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TM</name>
<description>Time Master</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LDSDL</name>
<description>LD of Synchronization Deviation
Limit</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>IRTO</name>
<description>Initial Reference Trigger
Offset</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>EECS</name>
<description>Enable External Clock
Synchronization</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWL</name>
<description>Application Watchdog Limit</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>EGTF</name>
<description>Enable Global Time
Filtering</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECC</name>
<description>Enable Clock Calibration</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVTP</name>
<description>Event Trigger Polarity</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTMLM</name>
<displayName>FDCAN_TTMLM</displayName>
<description>FDCAN TT Matrix Limits
Register</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCM</name>
<description>Cycle Count Max</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>CSS</name>
<description>Cycle Start
Synchronization</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TXEW</name>
<description>Tx Enable Window</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ENTT</name>
<description>Expected Number of Tx
Triggers</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TURCF</name>
<displayName>FDCAN_TURCF</displayName>
<description>FDCAN TUR Configuration
Register</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NCL</name>
<description>Numerator Configuration
Low.</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>DC</name>
<description>Denominator Configuration.</description>
<bitOffset>16</bitOffset>
<bitWidth>14</bitWidth>
</field>
<field>
<name>ELT</name>
<description>Enable Local Time</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTOCN</name>
<displayName>FDCAN_TTOCN</displayName>
<description>FDCAN TT Operation Control
Register</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SGT</name>
<description>Set Global time</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECS</name>
<description>External Clock
Synchronization</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWP</name>
<description>Stop Watch Polarity</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWS</name>
<description>Stop Watch Source.</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RTIE</name>
<description>Register Time Mark Interrupt Pulse
Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TMC</name>
<description>Register Time Mark Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TTIE</name>
<description>Trigger Time Mark Interrupt Pulse
Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCS</name>
<description>Gap Control Select</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FGP</name>
<description>Finish Gap.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TMG</name>
<description>Time Mark Gap</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NIG</name>
<description>Next is Gap</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ESCN</name>
<description>External Synchronization
Control</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LCKC</name>
<description>TT Operation Control Register
Locked</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CAN_TTGTP</name>
<displayName>CAN_TTGTP</displayName>
<description>FDCAN TT Global Time Preset
Register</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NCL</name>
<description>Time Preset</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CTP</name>
<description>Cycle Time Target Phase</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTTMK</name>
<displayName>FDCAN_TTTMK</displayName>
<description>FDCAN TT Time Mark Register</description>
<addressOffset>0x11C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TM</name>
<description>Time Mark</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>TICC</name>
<description>Time Mark Cycle Code</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>LCKM</name>
<description>TT Time Mark Register
Locked</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTIR</name>
<displayName>FDCAN_TTIR</displayName>
<description>FDCAN TT Interrupt Register</description>
<addressOffset>0x120</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SBC</name>
<description>Start of Basic Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMC</name>
<description>Start of Matrix Cycle</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSM</name>
<description>Change of Synchronization
Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOG</name>
<description>Start of Gap</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTMI</name>
<description>Register Time Mark
Interrupt.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TTMI</name>
<description>Trigger Time Mark Event
Internal</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWE</name>
<description>Stop Watch Event</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTW</name>
<description>Global Time Wrap</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTD</name>
<description>Global Time Discontinuity</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTE</name>
<description>Global Time Error</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXU</name>
<description>Tx Count Underflow</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXO</name>
<description>Tx Count Overflow</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE1</name>
<description>Scheduling Error 1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE2</name>
<description>Scheduling Error 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ELC</name>
<description>Error Level Changed.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWTG</name>
<description>Initialization Watch
Trigger</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WT</name>
<description>Watch Trigger</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AW</name>
<description>Application Watchdog</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CER</name>
<description>Configuration Error</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTIE</name>
<displayName>FDCAN_TTIE</displayName>
<description>FDCAN TT Interrupt Enable
Register</description>
<addressOffset>0x124</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SBCE</name>
<description>Start of Basic Cycle Interrupt
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMCE</name>
<description>Start of Matrix Cycle Interrupt
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSME</name>
<description>Change of Synchronization Mode Interrupt
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOGE</name>
<description>Start of Gap Interrupt
Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTMIE</name>
<description>Register Time Mark Interrupt
Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TTMIE</name>
<description>Trigger Time Mark Event Internal
Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWEE</name>
<description>Stop Watch Event Interrupt
Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTWE</name>
<description>Global Time Wrap Interrupt
Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTDE</name>
<description>Global Time Discontinuity Interrupt
Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTEE</name>
<description>Global Time Error Interrupt
Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUE</name>
<description>Tx Count Underflow Interrupt
Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXOE</name>
<description>Tx Count Overflow Interrupt
Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE1E</name>
<description>Scheduling Error 1 Interrupt
Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE2E</name>
<description>Scheduling Error 2 Interrupt
Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ELCE</name>
<description>Change Error Level Interrupt
Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWTGE</name>
<description>Initialization Watch Trigger Interrupt
Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WTE</name>
<description>Watch Trigger Interrupt
Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWE</name>
<description>Application Watchdog Interrupt
Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CERE</name>
<description>Configuration Error Interrupt
Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTILS</name>
<displayName>FDCAN_TTILS</displayName>
<description>FDCAN TT Interrupt Line Select
Register</description>
<addressOffset>0x128</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SBCL</name>
<description>Start of Basic Cycle Interrupt
Line</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMCL</name>
<description>Start of Matrix Cycle Interrupt
Line</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSML</name>
<description>Change of Synchronization Mode Interrupt
Line</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOGL</name>
<description>Start of Gap Interrupt
Line</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTMIL</name>
<description>Register Time Mark Interrupt
Line</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TTMIL</name>
<description>Trigger Time Mark Event Internal
Interrupt Line</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWEL</name>
<description>Stop Watch Event Interrupt
Line</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTWL</name>
<description>Global Time Wrap Interrupt
Line</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTDL</name>
<description>Global Time Discontinuity Interrupt
Line</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GTEL</name>
<description>Global Time Error Interrupt
Line</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUL</name>
<description>Tx Count Underflow Interrupt
Line</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXOL</name>
<description>Tx Count Overflow Interrupt
Line</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE1L</name>
<description>Scheduling Error 1 Interrupt
Line</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SE2L</name>
<description>Scheduling Error 2 Interrupt
Line</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ELCL</name>
<description>Change Error Level Interrupt
Line</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IWTGL</name>
<description>Initialization Watch Trigger Interrupt
Line</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WTL</name>
<description>Watch Trigger Interrupt
Line</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWL</name>
<description>Application Watchdog Interrupt
Line</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CERL</name>
<description>Configuration Error Interrupt
Line</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTOST</name>
<displayName>FDCAN_TTOST</displayName>
<description>FDCAN TT Operation Status
Register</description>
<addressOffset>0x12C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EL</name>
<description>Error Level</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MS</name>
<description>Master State.</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SYS</name>
<description>Synchronization State</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GTP</name>
<description>Quality of Global Time
Phase</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QCS</name>
<description>Quality of Clock Speed</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTO</name>
<description>Reference Trigger Offset</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>WGTD</name>
<description>Wait for Global Time
Discontinuity</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFI</name>
<description>Gap Finished Indicator.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TMP</name>
<description>Time Master Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>GSI</name>
<description>Gap Started Indicator.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WFE</name>
<description>Wait for Event</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AWE</name>
<description>Application Watchdog Event</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WECS</name>
<description>Wait for External Clock
Synchronization</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPL</name>
<description>Schedule Phase Lock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TURNA</name>
<displayName>FDCAN_TURNA</displayName>
<description>FDCAN TUR Numerator Actual
Register</description>
<addressOffset>0x130</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NAV</name>
<description>Numerator Actual Value</description>
<bitOffset>0</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTLGT</name>
<displayName>FDCAN_TTLGT</displayName>
<description>FDCAN TT Local and Global Time
Register</description>
<addressOffset>0x134</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LT</name>
<description>Local Time</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>GT</name>
<description>Global Time</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTCTC</name>
<displayName>FDCAN_TTCTC</displayName>
<description>FDCAN TT Cycle Time and Count
Register</description>
<addressOffset>0x138</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CT</name>
<description>Cycle Time</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CC</name>
<description>Cycle Count</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTCPT</name>
<displayName>FDCAN_TTCPT</displayName>
<description>FDCAN TT Capture Time Register</description>
<addressOffset>0x13C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CT</name>
<description>Cycle Count Value</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>SWV</name>
<description>Stop Watch Value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTCSM</name>
<displayName>FDCAN_TTCSM</displayName>
<description>FDCAN TT Cycle Sync Mark
Register</description>
<addressOffset>0x140</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSM</name>
<description>Cycle Sync Mark</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>FDCAN_TTTS</name>
<displayName>FDCAN_TTTS</displayName>
<description>FDCAN TT Trigger Select
Register</description>
<addressOffset>0x300</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWTDEL</name>
<description>Stop watch trigger input
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>EVTSEL</name>
<description>Event trigger input
selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="FDCAN1">
<name>FDCAN2</name>
<baseAddress>0x4000A400</baseAddress>
<interrupt>
<name>FDCAN2_IT0</name>
<description>FDCAN2 Interrupt 0</description>
<value>20</value>
</interrupt>
<interrupt>
<name>FDCAN2_IT1</name>
<description>FDCAN2 Interrupt 1</description>
<value>22</value>
</interrupt>
</peripheral>
<peripheral>
<name>CAN_CCU</name>
<description>CCU registers</description>
<groupName>FDCAN</groupName>
<baseAddress>0x4000A800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CREL</name>
<displayName>CREL</displayName>
<description>Clock Calibration Unit Core Release
Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DAY</name>
<description>Time Stamp Day</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>MON</name>
<description>Time Stamp Month</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Time Stamp Year</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SUBSTEP</name>
<description>Sub-step of Core Release</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>STEP</name>
<description>Step of Core Release</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REL</name>
<description>Core Release</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCFG</name>
<displayName>CCFG</displayName>
<description>Calibration Configuration
Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TQBT</name>
<description>Time Quanta per Bit Time</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>BCC</name>
<description>Bypass Clock Calibration</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFL</name>
<description>Calibration Field Length</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OCPM</name>
<description>Oscillator Clock Periods
Minimum</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CDIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SWR</name>
<description>Software Reset</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CSTAT</name>
<displayName>CSTAT</displayName>
<description>Calibration Status Register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OCPC</name>
<description>Oscillator Clock Period
Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>18</bitWidth>
</field>
<field>
<name>TQC</name>
<description>Time Quanta Counter</description>
<bitOffset>18</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>CALS</name>
<description>Calibration State</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CWD</name>
<displayName>CWD</displayName>
<description>Calibration Watchdog Register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDC</name>
<description>WDC</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>WDV</name>
<description>WDV</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>IR</name>
<displayName>IR</displayName>
<description>Clock Calibration Unit Interrupt
Register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CWE</name>
<description>Calibration Watchdog Event</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSC</name>
<description>Calibration State Changed</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IE</name>
<displayName>IE</displayName>
<description>Clock Calibration Unit Interrupt Enable
Register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CWEE</name>
<description>Calibration Watchdog Event
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSCE</name>
<description>Calibration State Changed
Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MDIOS</name>
<description>Management data input/output slave</description>
<groupName>MDIOS</groupName>
<baseAddress>0x40009400</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>MDIOS_WKUP</name>
<description>MDIOS wakeup</description>
<value>119</value>
</interrupt>
<interrupt>
<name>MDIOS</name>
<description>MDIOS global interrupt</description>
<value>120</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>MDIOS configuration register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN</name>
<description>Peripheral enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRIE</name>
<description>Register write interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDIE</name>
<description>Register Read Interrupt
Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIE</name>
<description>Error interrupt enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPC</name>
<description>Disable Preamble Check</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_ADDRESS</name>
<description>Slaves's address</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>WRFR</name>
<displayName>WRFR</displayName>
<description>MDIOS write flag register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRF</name>
<description>Write flags for MDIO registers 0 to
31</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CWRFR</name>
<displayName>CWRFR</displayName>
<description>MDIOS clear write flag
register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CWRF</name>
<description>Clear the write flag</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RDFR</name>
<displayName>RDFR</displayName>
<description>MDIOS read flag register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDF</name>
<description>Read flags for MDIO registers 0 to
31</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRDFR</name>
<displayName>CRDFR</displayName>
<description>MDIOS clear read flag register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRDF</name>
<description>Clear the read flag</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>MDIOS status register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PERF</name>
<description>Preamble error flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERF</name>
<description>Start error flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TERF</name>
<description>Turnaround error flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLRFR</name>
<displayName>CLRFR</displayName>
<description>MDIOS clear flag register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPERF</name>
<description>Clear the preamble error
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSERF</name>
<description>Clear the start error flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTERF</name>
<description>Clear the turnaround error
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR0</name>
<displayName>DINR0</displayName>
<description>MDIOS input data register 0</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN0</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR1</name>
<displayName>DINR1</displayName>
<description>MDIOS input data register 1</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN1</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR2</name>
<displayName>DINR2</displayName>
<description>MDIOS input data register 2</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN2</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR3</name>
<displayName>DINR3</displayName>
<description>MDIOS input data register 3</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN3</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR4</name>
<displayName>DINR4</displayName>
<description>MDIOS input data register 4</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN4</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR5</name>
<displayName>DINR5</displayName>
<description>MDIOS input data register 5</description>
<addressOffset>0x30</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN5</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR6</name>
<displayName>DINR6</displayName>
<description>MDIOS input data register 6</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN6</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR7</name>
<displayName>DINR7</displayName>
<description>MDIOS input data register 7</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN7</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR8</name>
<displayName>DINR8</displayName>
<description>MDIOS input data register 8</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN8</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR9</name>
<displayName>DINR9</displayName>
<description>MDIOS input data register 9</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN9</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR10</name>
<displayName>DINR10</displayName>
<description>MDIOS input data register 10</description>
<addressOffset>0x44</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN10</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR11</name>
<displayName>DINR11</displayName>
<description>MDIOS input data register 11</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN11</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR12</name>
<displayName>DINR12</displayName>
<description>MDIOS input data register 12</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN12</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR13</name>
<displayName>DINR13</displayName>
<description>MDIOS input data register 13</description>
<addressOffset>0x50</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN13</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR14</name>
<displayName>DINR14</displayName>
<description>MDIOS input data register 14</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN14</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR15</name>
<displayName>DINR15</displayName>
<description>MDIOS input data register 15</description>
<addressOffset>0x58</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN15</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR16</name>
<displayName>DINR16</displayName>
<description>MDIOS input data register 16</description>
<addressOffset>0x5C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN16</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR17</name>
<displayName>DINR17</displayName>
<description>MDIOS input data register 17</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN17</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR18</name>
<displayName>DINR18</displayName>
<description>MDIOS input data register 18</description>
<addressOffset>0x64</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN18</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR19</name>
<displayName>DINR19</displayName>
<description>MDIOS input data register 19</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN19</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR20</name>
<displayName>DINR20</displayName>
<description>MDIOS input data register 20</description>
<addressOffset>0x6C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN20</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR21</name>
<displayName>DINR21</displayName>
<description>MDIOS input data register 21</description>
<addressOffset>0x70</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN21</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR22</name>
<displayName>DINR22</displayName>
<description>MDIOS input data register 22</description>
<addressOffset>0x74</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN22</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR23</name>
<displayName>DINR23</displayName>
<description>MDIOS input data register 23</description>
<addressOffset>0x78</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN23</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR24</name>
<displayName>DINR24</displayName>
<description>MDIOS input data register 24</description>
<addressOffset>0x7C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN24</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR25</name>
<displayName>DINR25</displayName>
<description>MDIOS input data register 25</description>
<addressOffset>0x80</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN25</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR26</name>
<displayName>DINR26</displayName>
<description>MDIOS input data register 26</description>
<addressOffset>0x84</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN26</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR27</name>
<displayName>DINR27</displayName>
<description>MDIOS input data register 27</description>
<addressOffset>0x88</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN27</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR28</name>
<displayName>DINR28</displayName>
<description>MDIOS input data register 28</description>
<addressOffset>0x8C</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN28</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR29</name>
<displayName>DINR29</displayName>
<description>MDIOS input data register 29</description>
<addressOffset>0x90</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN29</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR30</name>
<displayName>DINR30</displayName>
<description>MDIOS input data register 30</description>
<addressOffset>0x94</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN30</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DINR31</name>
<displayName>DINR31</displayName>
<description>MDIOS input data register 31</description>
<addressOffset>0x98</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIN31</name>
<description>Input data received from MDIO Master
during write frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR0</name>
<displayName>DOUTR0</displayName>
<description>MDIOS output data register 0</description>
<addressOffset>0x9C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT0</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR1</name>
<displayName>DOUTR1</displayName>
<description>MDIOS output data register 1</description>
<addressOffset>0xA0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT1</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR2</name>
<displayName>DOUTR2</displayName>
<description>MDIOS output data register 2</description>
<addressOffset>0xA4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT2</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR3</name>
<displayName>DOUTR3</displayName>
<description>MDIOS output data register 3</description>
<addressOffset>0xA8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT3</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR4</name>
<displayName>DOUTR4</displayName>
<description>MDIOS output data register 4</description>
<addressOffset>0xAC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT4</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR5</name>
<displayName>DOUTR5</displayName>
<description>MDIOS output data register 5</description>
<addressOffset>0xB0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT5</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR6</name>
<displayName>DOUTR6</displayName>
<description>MDIOS output data register 6</description>
<addressOffset>0xB4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT6</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR7</name>
<displayName>DOUTR7</displayName>
<description>MDIOS output data register 7</description>
<addressOffset>0xB8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT7</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR8</name>
<displayName>DOUTR8</displayName>
<description>MDIOS output data register 8</description>
<addressOffset>0xBC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT8</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR9</name>
<displayName>DOUTR9</displayName>
<description>MDIOS output data register 9</description>
<addressOffset>0xC0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT9</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR10</name>
<displayName>DOUTR10</displayName>
<description>MDIOS output data register 10</description>
<addressOffset>0xC4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT10</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR11</name>
<displayName>DOUTR11</displayName>
<description>MDIOS output data register 11</description>
<addressOffset>0xC8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT11</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR12</name>
<displayName>DOUTR12</displayName>
<description>MDIOS output data register 12</description>
<addressOffset>0xCC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT12</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR13</name>
<displayName>DOUTR13</displayName>
<description>MDIOS output data register 13</description>
<addressOffset>0xD0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT13</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR14</name>
<displayName>DOUTR14</displayName>
<description>MDIOS output data register 14</description>
<addressOffset>0xD4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT14</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR15</name>
<displayName>DOUTR15</displayName>
<description>MDIOS output data register 15</description>
<addressOffset>0xD8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT15</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR16</name>
<displayName>DOUTR16</displayName>
<description>MDIOS output data register 16</description>
<addressOffset>0xDC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT16</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR17</name>
<displayName>DOUTR17</displayName>
<description>MDIOS output data register 17</description>
<addressOffset>0xE0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT17</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR18</name>
<displayName>DOUTR18</displayName>
<description>MDIOS output data register 18</description>
<addressOffset>0xE4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT18</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR19</name>
<displayName>DOUTR19</displayName>
<description>MDIOS output data register 19</description>
<addressOffset>0xE8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT19</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR20</name>
<displayName>DOUTR20</displayName>
<description>MDIOS output data register 20</description>
<addressOffset>0xEC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT20</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR21</name>
<displayName>DOUTR21</displayName>
<description>MDIOS output data register 21</description>
<addressOffset>0xF0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT21</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR22</name>
<displayName>DOUTR22</displayName>
<description>MDIOS output data register 22</description>
<addressOffset>0xF4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT22</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR23</name>
<displayName>DOUTR23</displayName>
<description>MDIOS output data register 23</description>
<addressOffset>0xF8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT23</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR24</name>
<displayName>DOUTR24</displayName>
<description>MDIOS output data register 24</description>
<addressOffset>0xFC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT24</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR25</name>
<displayName>DOUTR25</displayName>
<description>MDIOS output data register 25</description>
<addressOffset>0x100</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT25</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR26</name>
<displayName>DOUTR26</displayName>
<description>MDIOS output data register 26</description>
<addressOffset>0x104</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT26</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR27</name>
<displayName>DOUTR27</displayName>
<description>MDIOS output data register 27</description>
<addressOffset>0x108</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT27</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR28</name>
<displayName>DOUTR28</displayName>
<description>MDIOS output data register 28</description>
<addressOffset>0x10C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT28</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR29</name>
<displayName>DOUTR29</displayName>
<description>MDIOS output data register 29</description>
<addressOffset>0x110</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT29</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR30</name>
<displayName>DOUTR30</displayName>
<description>MDIOS output data register 30</description>
<addressOffset>0x114</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT30</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DOUTR31</name>
<displayName>DOUTR31</displayName>
<description>MDIOS output data register 31</description>
<addressOffset>0x118</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DOUT31</name>
<description>Output data sent to MDIO Master during
read frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>OPAMP</name>
<description>Operational amplifiers</description>
<groupName>OPAMP</groupName>
<baseAddress>0x40009000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>OPAMP1_CSR</name>
<displayName>OPAMP1_CSR</displayName>
<description>OPAMP1 control/status register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPAEN</name>
<description>Operational amplifier
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FORCE_VP</name>
<description>Force internal reference on VP (reserved
for test</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VP_SEL</name>
<description>Operational amplifier PGA
mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>VM_SEL</name>
<description>Inverting input selection</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OPAHSM</name>
<description>Operational amplifier high-speed
mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALON</name>
<description>Calibration mode enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALSEL</name>
<description>Calibration selection</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PGA_GAIN</name>
<description>allows to switch from AOP offset trimmed
values to AOP offset</description>
<bitOffset>14</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>USERTRIM</name>
<description>User trimming enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTREF</name>
<description>OPAMP calibration reference voltage
output control (reserved for test)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALOUT</name>
<description>Operational amplifier calibration
output</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPAMP1_OTR</name>
<displayName>OPAMP1_OTR</displayName>
<description>OPAMP1 offset trimming register in normal
mode</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRIMOFFSETN</name>
<description>Trim for NMOS differential
pairs</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIMOFFSETP</name>
<description>Trim for PMOS differential
pairs</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPAMP1_HSOTR</name>
<displayName>OPAMP1_HSOTR</displayName>
<description>OPAMP1 offset trimming register in low-power
mode</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRIMLPOFFSETN</name>
<description>Trim for NMOS differential
pairs</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIMLPOFFSETP</name>
<description>Trim for PMOS differential
pairs</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPAMP2_CSR</name>
<displayName>OPAMP2_CSR</displayName>
<description>OPAMP2 control/status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OPAEN</name>
<description>Operational amplifier
Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FORCE_VP</name>
<description>Force internal reference on VP (reserved
for test)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VM_SEL</name>
<description>Inverting input selection</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OPAHSM</name>
<description>Operational amplifier high-speed
mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALON</name>
<description>Calibration mode enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALSEL</name>
<description>Calibration selection</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PGA_GAIN</name>
<description>Operational amplifier Programmable
amplifier gain value</description>
<bitOffset>14</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>USERTRIM</name>
<description>User trimming enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTREF</name>
<description>OPAMP calibration reference voltage
output control (reserved for test)</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALOUT</name>
<description>Operational amplifier calibration
output</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPAMP2_OTR</name>
<displayName>OPAMP2_OTR</displayName>
<description>OPAMP2 offset trimming register in normal
mode</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRIMOFFSETN</name>
<description>Trim for NMOS differential
pairs</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIMOFFSETP</name>
<description>Trim for PMOS differential
pairs</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>OPAMP2_HSOTR</name>
<displayName>OPAMP2_HSOTR</displayName>
<description>OPAMP2 offset trimming register in low-power
mode</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRIMLPOFFSETN</name>
<description>Trim for NMOS differential
pairs</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIMLPOFFSETP</name>
<description>Trim for PMOS differential
pairs</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SWPMI</name>
<description>Single Wire Protocol Master
Interface</description>
<groupName>SWPMI</groupName>
<baseAddress>0x40008800</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>SWPMI Configuration/Control
register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDMA</name>
<description>Reception DMA enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXDMA</name>
<description>Transmission DMA enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXMODE</name>
<description>Reception buffering mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXMODE</name>
<description>Transmission buffering
mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPBK</name>
<description>Loopback mode enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPACT</name>
<description>Single wire protocol master interface
activate</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEACT</name>
<description>Single wire protocol master interface
deactivate</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWPTEN</name>
<description>Single wire protocol master transceiver
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BRR</name>
<displayName>BRR</displayName>
<description>SWPMI Bitrate register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>BR</name>
<description>Bitrate prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<displayName>ISR</displayName>
<description>SWPMI Interrupt and Status
register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x000002C2</resetValue>
<fields>
<field>
<name>RXBFF</name>
<description>Receive buffer full flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXBEF</name>
<description>Transmit buffer empty flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBERF</name>
<description>Receive CRC error flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVRF</name>
<description>Receive overrun error flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUNRF</name>
<description>Transmit underrun error
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNE</name>
<description>Receive data register not
empty</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXE</name>
<description>Transmit data register
empty</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCF</name>
<description>Transfer complete flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRF</name>
<description>Slave resume flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>SUSPEND flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEACTF</name>
<description>DEACTIVATED flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDYF</name>
<description>transceiver ready flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<displayName>ICR</displayName>
<description>SWPMI Interrupt Flag Clear
register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRXBFF</name>
<description>Clear receive buffer full
flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTXBEF</name>
<description>Clear transmit buffer empty
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRXBERF</name>
<description>Clear receive CRC error
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRXOVRF</name>
<description>Clear receive overrun error
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTXUNRF</name>
<description>Clear transmit underrun error
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTCF</name>
<description>Clear transfer complete
flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSRF</name>
<description>Clear slave resume flag</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRDYF</name>
<description>Clear transceiver ready
flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<displayName>IER</displayName>
<description>SWPMI Interrupt Enable
register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXBFIE</name>
<description>Receive buffer full interrupt
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXBEIE</name>
<description>Transmit buffer empty interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBERIE</name>
<description>Receive CRC error interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOVRIE</name>
<description>Receive overrun error interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUNRIE</name>
<description>Transmit underrun error interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RIE</name>
<description>Receive interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIE</name>
<description>Transmit interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCIE</name>
<description>Transmit complete interrupt
enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRIE</name>
<description>Slave resume interrupt
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RDYIE</name>
<description>Transceiver ready interrupt
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RFL</name>
<displayName>RFL</displayName>
<description>SWPMI Receive Frame Length
register</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RFL</name>
<description>Receive frame length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<displayName>TDR</displayName>
<description>SWPMI Transmit data register</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TD</name>
<description>Transmit data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<displayName>RDR</displayName>
<description>SWPMI Receive data register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RD</name>
<description>received data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OR</name>
<displayName>OR</displayName>
<description>SWPMI Option register</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWP_TBYP</name>
<description>SWP transceiver bypass</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWP_CLASS</name>
<description>SWP class selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TIM2</name>
<description>General purpose timers</description>
<groupName>TIM</groupName>
<baseAddress>0x40000000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TIM2</name>
<description>TIM2 global interrupt</description>
<value>28</value>
</interrupt>
<interrupt>
<name>SWPMI1</name>
<description>SWPMI global interrupt</description>
<value>115</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UIFREMAP</name>
<description>UIF status bit remapping</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKD</name>
<description>Clock division</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ARPE</name>
<description>Auto-reload preload enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMS</name>
<description>Center-aligned mode
selection</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Direction</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPM</name>
<description>One-pulse mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>URS</name>
<description>Update request source</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDIS</name>
<description>Update disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CEN</name>
<description>Counter enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TI1S</name>
<description>TI1 selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMS</name>
<description>Master mode selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CCDS</name>
<description>Capture/compare DMA
selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SMCR</name>
<displayName>SMCR</displayName>
<description>slave mode control register</description>
<addressOffset>0x8</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TS_4_3</name>
<description>Trigger selection</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SMS_3</name>
<description>Slave mode selection - bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETP</name>
<description>External trigger polarity</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECE</name>
<description>External clock enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ETPS</name>
<description>External trigger prescaler</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ETF</name>
<description>External trigger filter</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MSM</name>
<description>Master/Slave mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TS</name>
<description>Trigger selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SMS</name>
<description>Slave mode selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIER</name>
<displayName>DIER</displayName>
<description>DMA/Interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TDE</name>
<description>Trigger DMA request enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4DE</name>
<description>Capture/Compare 4 DMA request
enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3DE</name>
<description>Capture/Compare 3 DMA request
enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2DE</name>
<description>Capture/Compare 2 DMA request
enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1DE</name>
<description>Capture/Compare 1 DMA request
enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDE</name>
<description>Update DMA request enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIE</name>
<description>Trigger interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4IE</name>
<description>Capture/Compare 4 interrupt
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3IE</name>
<description>Capture/Compare 3 interrupt
enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IE</name>
<description>Capture/Compare 2 interrupt
enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IE</name>
<description>Capture/Compare 1 interrupt
enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIE</name>
<description>Update interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC4OF</name>
<description>Capture/Compare 4 overcapture
flag</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3OF</name>
<description>Capture/Compare 3 overcapture
flag</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2OF</name>
<description>Capture/compare 2 overcapture
flag</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1OF</name>
<description>Capture/Compare 1 overcapture
flag</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TIF</name>
<description>Trigger interrupt flag</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4IF</name>
<description>Capture/Compare 4 interrupt
flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3IF</name>
<description>Capture/Compare 3 interrupt
flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2IF</name>
<description>Capture/Compare 2 interrupt
flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1IF</name>
<description>Capture/compare 1 interrupt
flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIF</name>
<description>Update interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EGR</name>
<displayName>EGR</displayName>
<description>event generation register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Trigger generation</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4G</name>
<description>Capture/compare 4
generation</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3G</name>
<description>Capture/compare 3
generation</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2G</name>
<description>Capture/compare 2
generation</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1G</name>
<description>Capture/compare 1
generation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UG</name>
<description>Update generation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Output</name>
<displayName>CCMR1_Output</displayName>
<description>capture/compare mode register 1 (output
mode)</description>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC1S</name>
<description>CC1S</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC1FE</name>
<description>OC1FE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1PE</name>
<description>OC1PE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M</name>
<description>OC1M</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC1CE</name>
<description>OC1CE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2S</name>
<description>CC2S</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC2FE</name>
<description>OC2FE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2PE</name>
<description>OC2PE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2M</name>
<description>OC2M</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC2CE</name>
<description>OC2CE</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC1M_3</name>
<description>Output Compare 1 mode - bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC2M_3</name>
<description>Output Compare 2 mode - bit
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR1_Input</name>
<displayName>CCMR1_Input</displayName>
<description>capture/compare mode register 1 (input
mode)</description>
<alternateRegister>CCMR1_Output</alternateRegister>
<addressOffset>0x18</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC2F</name>
<description>Input capture 2 filter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC2PCS</name>
<description>Input capture 2 prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC2S</name>
<description>Capture/Compare 2
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IC1F</name>
<description>Input capture 1 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ICPCS</name>
<description>Input capture 1 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC1S</name>
<description>Capture/Compare 1
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR2_Output</name>
<displayName>CCMR2_Output</displayName>
<description>capture/compare mode register 2 (output
mode)</description>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OC4M_3</name>
<description>Output Compare 2 mode - bit
3</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC3M_3</name>
<description>Output Compare 1 mode - bit
3</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>O24CE</name>
<description>O24CE</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC4M</name>
<description>OC4M</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC4PE</name>
<description>OC4PE</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC4FE</name>
<description>OC4FE</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4S</name>
<description>CC4S</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>OC3CE</name>
<description>OC3CE</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC3M</name>
<description>OC3M</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OC3PE</name>
<description>OC3PE</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OC3FE</name>
<description>OC3FE</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3S</name>
<description>CC3S</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCMR2_Input</name>
<displayName>CCMR2_Input</displayName>
<description>capture/compare mode register 2 (input
mode)</description>
<alternateRegister>CCMR2_Output</alternateRegister>
<addressOffset>0x1C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IC4F</name>
<description>Input capture 4 filter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC4PSC</name>
<description>Input capture 4 prescaler</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC4S</name>
<description>Capture/Compare 4
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IC3F</name>
<description>Input capture 3 filter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IC3PSC</name>
<description>Input capture 3 prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CC3S</name>
<description>Capture/compare 3
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCER</name>
<displayName>CCER</displayName>
<description>capture/compare enable
register</description>
<addressOffset>0x20</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC4NP</name>
<description>Capture/Compare 4 output
Polarity</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4P</name>
<description>Capture/Compare 3 output
Polarity</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4E</name>
<description>Capture/Compare 4 output
enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3NP</name>
<description>Capture/Compare 3 output
Polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3P</name>
<description>Capture/Compare 3 output
Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3E</name>
<description>Capture/Compare 3 output
enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2NP</name>
<description>Capture/Compare 2 output
Polarity</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2P</name>
<description>Capture/Compare 2 output
Polarity</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2E</name>
<description>Capture/Compare 2 output
enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1NP</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1P</name>
<description>Capture/Compare 1 output
Polarity</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1E</name>
<description>Capture/Compare 1 output
enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>counter</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT_L</name>
<description>low counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CNT_H</name>
<description>High counter value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSC</name>
<displayName>PSC</displayName>
<description>prescaler</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>auto-reload register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARR_H</name>
<description>High Auto-reload value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>ARR_L</name>
<description>Low Auto-reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<displayName>CCR1</displayName>
<description>capture/compare register 1</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR1_H</name>
<description>High Capture/Compare 1
value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CCR1_L</name>
<description>Low Capture/Compare 1
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<displayName>CCR2</displayName>
<description>capture/compare register 2</description>
<addressOffset>0x38</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR2_H</name>
<description>High Capture/Compare 2
value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CCR2_L</name>
<description>Low Capture/Compare 2
value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR3</name>
<displayName>CCR3</displayName>
<description>capture/compare register 3</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR3_H</name>
<description>High Capture/Compare value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CCR3_L</name>
<description>Low Capture/Compare value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR4</name>
<displayName>CCR4</displayName>
<description>capture/compare register 4</description>
<addressOffset>0x40</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCR4_H</name>
<description>High Capture/Compare value</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>CCR4_L</name>
<description>Low Capture/Compare value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<displayName>DCR</displayName>
<description>DMA control register</description>
<addressOffset>0x48</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DBL</name>
<description>DMA burst length</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>DBA</name>
<description>DMA base address</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DMAR</name>
<displayName>DMAR</displayName>
<description>DMA address for full transfer</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DMAB</name>
<description>DMA register for burst
accesses</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>AF1</name>
<displayName>AF1</displayName>
<description>TIM alternate function option register
1</description>
<addressOffset>0x60</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>ETRSEL</name>
<description>ETR source selection</description>
<bitOffset>14</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>TISEL</name>
<displayName>TISEL</displayName>
<description>TIM timer input selection
register</description>
<addressOffset>0x68</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TI1SEL</name>
<description>TI1[0] to TI1[15] input
selection</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI2SEL</name>
<description>TI2[0] to TI2[15] input
selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI3SEL</name>
<description>TI3[0] to TI3[15] input
selection</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TI4SEL</name>
<description>TI4[0] to TI4[15] input
selection</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="TIM2">
<name>TIM3</name>
<baseAddress>0x40000400</baseAddress>
<interrupt>
<name>TIM3</name>
<description>TIM3 global interrupt</description>
<value>29</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TIM2">
<name>TIM4</name>
<baseAddress>0x40000800</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM2">
<name>TIM5</name>
<baseAddress>0x40000C00</baseAddress>
<interrupt>
<name>TIM4</name>
<description>TIM4 global interrupt</description>
<value>30</value>
</interrupt>
<interrupt>
<name>TIM5</name>
<description>TIM5 global interrupt</description>
<value>50</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TIM2">
<name>TIM12</name>
<baseAddress>0x40001800</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM2">
<name>TIM13</name>
<baseAddress>0x40001C00</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM2">
<name>TIM14</name>
<baseAddress>0x40002000</baseAddress>
</peripheral>
<peripheral>
<name>TIM6</name>
<description>Basic timers</description>
<groupName>TIM</groupName>
<baseAddress>0x40001000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TIM6_DAC</name>
<description>TIM6 global interrupt</description>
<value>54</value>
</interrupt>
<registers>
<register>
<name>CR1</name>
<displayName>CR1</displayName>
<description>control register 1</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UIFREMAP</name>
<description>UIF status bit remapping</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARPE</name>
<description>Auto-reload preload enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPM</name>
<description>One-pulse mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>URS</name>
<description>Update request source</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UDIS</name>
<description>Update disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CEN</name>
<description>Counter enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR2</name>
<displayName>CR2</displayName>
<description>control register 2</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>MMS</name>
<description>Master mode selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIER</name>
<displayName>DIER</displayName>
<description>DMA/Interrupt enable register</description>
<addressOffset>0xC</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UDE</name>
<description>Update DMA request enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIE</name>
<description>Update interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<displayName>SR</displayName>
<description>status register</description>
<addressOffset>0x10</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UIF</name>
<description>Update interrupt flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EGR</name>
<displayName>EGR</displayName>
<description>event generation register</description>
<addressOffset>0x14</addressOffset>
<size>0x20</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UG</name>
<description>Update generation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CNT</name>
<displayName>CNT</displayName>
<description>counter</description>
<addressOffset>0x24</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Low counter value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>UIFCPY</name>
<description>UIF Copy</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSC</name>
<displayName>PSC</displayName>
<description>prescaler</description>
<addressOffset>0x28</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PSC</name>
<description>Prescaler value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARR</name>
<displayName>ARR</displayName>
<description>auto-reload register</description>
<addressOffset>0x2C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARR</name>
<description>Low Auto-reload value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="TIM6">
<name>TIM7</name>
<baseAddress>0x40001400</baseAddress>
<interrupt>
<name>TIM7</name>
<description>TIM7 global interrupt</description>
<value>55</value>
</interrupt>
</peripheral>
<peripheral>
<name>DBGMCU</name>
<description>Microcontroller Debug Unit</description>
<groupName>DBGMCU</groupName>
<baseAddress>0x5C001000</baseAddress>
<addressBlock>
<offset>0x0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>IDC</name>
<displayName>IDC</displayName>
<description>DBGMCU Identity Code Register</description>
<addressOffset>0x0</addressOffset>
<size>0x20</size>
<access>read-only</access>
<resetValue>0x10006450</resetValue>
<fields>
<field>
<name>DEV_ID</name>
<description>Device ID</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>REV_ID</name>
<description>Revision</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CR</name>
<displayName>CR</displayName>
<description>DBGMCU Configuration Register</description>
<addressOffset>0x4</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DBGSLEEP_D1</name>
<description> Allow D1 domain debug in Sleep mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSTOP_D1</name>
<description>Allow D1 domain debug in Stop mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSTBY_D1</name>
<description>Allow D1 domain debug in Standby mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSLEEP_D2</name>
<description> Allow D2 domain debug in Sleep mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSTOP_D2</name>
<description>Allow D2 domain debug in Stop mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSTBY_D2</name>
<description> Allow D2 domain debug in Standby mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSTOP_D3</name>
<description>Allow debug in D3 Stop mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGSTBY_D3</name>
<description>Allow debug in D3 Standby mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRACECLKEN</name>
<description>Trace port clock enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D1DBGCKEN</name>
<description> D1 debug clock enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>D3DBGCKEN</name>
<description>D3 debug clock enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRGOEN</name>
<description>External trigger output enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB3FZ1</name>
<displayName>APB3FZ1</displayName>
<description>DBGMCU APB3 peripheral freeze register</description>
<addressOffset>0x34</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WWDG1</name>
<description>WWDG1 stop in debug</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB1LFZ1</name>
<displayName>APB1LFZ1</displayName>
<description>DBGMCU APB1L peripheral freeze register</description>
<addressOffset>0x3C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DBG_TIM2</name>
<description>TIM2 stop in debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM3</name>
<description>TIM3 stop in debug</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM4</name>
<description>TIM4 stop in debug</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM5</name>
<description>TIM5 stop in debug</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM6</name>
<description>TIM6 stop in debug</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM7</name>
<description>TIM7 stop in debug</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM12</name>
<description>TIM12 stop in debug</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM13</name>
<description>TIM13 stop in debug</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM14</name>
<description>TIM14 stop in debug</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_LPTIM1</name>
<description> LPTIM1 stop in debug</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_I2C1</name>
<description> I2C1 SMBUS timeout stop in debug </description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_I2C2</name>
<description> I2C2 SMBUS timeout stop in debug</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_I2C3</name>
<description> I2C3 SMBUS timeout stop in debug</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB2FZ1</name>
<displayName>APB2FZ1</displayName>
<description>DBGMCU APB2 peripheral freeze register</description>
<addressOffset>0x4C</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DBG_TIM1</name>
<description> TIM1 stop in debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM8</name>
<description> TIM8 stop in debug</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM15</name>
<description>TIM15 stop in debug</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM16</name>
<description>TIM16 stop in debug</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_TIM17</name>
<description> TIM17 stop in debug</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_HRTIM</name>
<description> HRTIM stop in debug</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APB4FZ1</name>
<displayName>APB4FZ1</displayName>
<description>DBGMCU APB4 peripheral freeze register</description>
<addressOffset>0x54</addressOffset>
<size>0x20</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DBG_I2C4</name>
<description>I2C4 SMBUS timeout stop in debug</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_LPTIM2</name>
<description> LPTIM2 stop in debug</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_LPTIM3</name>
<description> LPTIM2 stop in debug</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_LPTIM4</name>
<description>LPTIM4 stop in debug</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_LPTIM5</name>
<description>LPTIM5 stop in debug</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_RTC</name>
<description>RTC stop in debug</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBG_IWDG1</name>
<description>Independent watchdog for D1 stop in debug</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
</peripherals>
</device>