rust/va108xx-hal
Archived
7
0
Fork 0
Code Issues Pull Requests Projects Releases 9 Wiki Activity

added cascade example

Browse Source 
- Slight change to CountDownTimer input parameter format
This commit is contained in:
Robin Müller
2021-12-06 01:55:00 +01:00
parent 54e016f0e3
commit 5f712b6ab7
5 changed files with 346 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

199
src/timer.rs
View File

@ -42,8 +42,61 @@ pub enum Event {
TimeOut,
}
#[derive(Default, Debug, PartialEq, Copy, Clone)]
pub struct CascadeCtrl {
/// Enable Cascade 0 signal active as a requirement for counting
pub enb_start_src_csd0: bool,
/// Invert Cascade 0, making it active low
pub inv_csd0: bool,
/// Enable Cascade 1 signal active as a requirement for counting
pub enb_start_src_csd1: bool,
/// Invert Cascade 1, making it active low
pub inv_csd1: bool,
/// Specify required operation if both Cascade 0 and Cascade 1 are active.
/// 0 is a logical AND of both cascade signals, 1 is a logical OR
pub dual_csd_op: bool,
/// Enable trigger mode for Cascade 0. In trigger mode, couting will start with the selected
/// cascade signal active, but once the counter is active, cascade control will be ignored
pub trg_csd0: bool,
/// Trigger mode, identical to [`trg_csd0`](CascadeCtrl) but for Cascade 1
pub trg_csd1: bool,
/// Enable Cascade 2 signal active as a requirement to stop counting. This mode is similar
/// to the REQ_STOP control bit, but signalled by a Cascade source
pub enb_stop_src_csd2: bool,
/// Invert Cascade 2, making it active low
pub inv_csd2: bool,
/// The counter is automatically disabled if the corresponding Cascade 2 level-sensitive input
/// souce is active when the count reaches 0. If the counter is not 0, the cascade control is
/// ignored
pub trg_csd2: bool,
}
#[derive(Debug, PartialEq)]
pub enum CascadeSel {
Csd0 = 0,
Csd1 = 1,
Csd2 = 2,
}
/// The numbers are the base numbers for bundles like PORTA, PORTB or TIM
#[derive(Debug, PartialEq)]
pub enum CascadeSource {
PortABase = 0,
PortBBase = 32,
TimBase = 64,
RamSbe = 96,
RamMbe = 97,
RomSbe = 98,
RomMbe = 99,
Txev = 100,
ClockDividerBase = 120,
}
#[derive(Debug, PartialEq)]
pub enum TimerErrors {
Canceled,
/// Invalid input for Cascade source
InvalidCsdSourceInput,
}
//==================================================================================================
@ -350,13 +403,84 @@ unsafe impl<TIM: ValidTim> TimRegInterface for CountDownTimer<TIM> {
}
}
macro_rules! csd_sel {
($func_name:ident, $csd_reg:ident) => {
/// Configure the Cascade sources
pub fn $func_name(
&mut self,
src: CascadeSource,
id: Option<u8>,
) -> Result<(), TimerErrors> {
let mut id_num = 0;
if let CascadeSource::PortABase
| CascadeSource::PortBBase
| CascadeSource::ClockDividerBase
| CascadeSource::TimBase = src
{
if id.is_none() {
return Err(TimerErrors::InvalidCsdSourceInput);
}
}
if id.is_some() {
id_num = id.unwrap();
}
match src {
CascadeSource::PortABase => {
if id_num > 55 {
return Err(TimerErrors::InvalidCsdSourceInput);
}
self.tim.reg().$csd_reg.write(|w| unsafe {
w.cassel().bits(CascadeSource::PortABase as u8 + id_num)
});
Ok(())
}
CascadeSource::PortBBase => {
if id_num > 23 {
return Err(TimerErrors::InvalidCsdSourceInput);
}
self.tim.reg().$csd_reg.write(|w| unsafe {
w.cassel().bits(CascadeSource::PortBBase as u8 + id_num)
});
Ok(())
}
CascadeSource::TimBase => {
if id_num > 23 {
return Err(TimerErrors::InvalidCsdSourceInput);
}
self.tim.reg().$csd_reg.write(|w| unsafe {
w.cassel().bits(CascadeSource::TimBase as u8 + id_num)
});
Ok(())
}
CascadeSource::ClockDividerBase => {
if id_num > 7 {
return Err(TimerErrors::InvalidCsdSourceInput);
}
self.tim.reg().cascade0.write(|w| unsafe {
w.cassel()
.bits(CascadeSource::ClockDividerBase as u8 + id_num)
});
Ok(())
}
_ => {
self.tim
.reg()
.$csd_reg
.write(|w| unsafe { w.cassel().bits(src as u8) });
Ok(())
}
}
}
};
}
impl<TIM: ValidTim> CountDownTimer<TIM> {
/// Configures a TIM peripheral as a periodic count down timer
pub fn new(syscfg: &mut SYSCONFIG, sys_clk: Hertz, tim: TIM) -> Self {
pub fn new(syscfg: &mut SYSCONFIG, sys_clk: impl Into<Hertz>, tim: TIM) -> Self {
enable_tim_clk(syscfg, TIM::TIM_ID);
let cd_timer = CountDownTimer {
tim: unsafe { TimRegister::new(tim) },
sys_clk,
sys_clk: sys_clk.into(),
rst_val: 0,
curr_freq: 0.hz(),
listening: false,
@ -380,7 +504,7 @@ impl<TIM: ValidTim> CountDownTimer<TIM> {
Event::TimeOut => {
enable_peripheral_clock(syscfg, PeripheralClocks::Irqsel);
irqsel.tim[TIM::TIM_ID as usize].write(|w| unsafe { w.bits(interrupt as u32) });
self.tim.reg().ctrl.modify(|_, w| w.irq_enb().set_bit());
self.enable_interrupt();
self.listening = true;
}
}
@ -391,12 +515,22 @@ impl<TIM: ValidTim> CountDownTimer<TIM> {
Event::TimeOut => {
enable_peripheral_clock(syscfg, PeripheralClocks::Irqsel);
irqsel.tim[TIM::TIM_ID as usize].write(|w| unsafe { w.bits(IRQ_DST_NONE) });
self.tim.reg().ctrl.modify(|_, w| w.irq_enb().clear_bit());
self.disable_interrupt();
self.listening = false;
}
}
}
#[inline(always)]
pub fn enable_interrupt(&mut self) {
self.tim.reg().ctrl.modify(|_, w| w.irq_enb().set_bit());
}
#[inline(always)]
pub fn disable_interrupt(&mut self) {
self.tim.reg().ctrl.modify(|_, w| w.irq_enb().clear_bit());
}
pub fn release(self, syscfg: &mut SYSCONFIG) -> TIM {
self.tim.reg().ctrl.write(|w| w.enable().clear_bit());
syscfg
@ -405,6 +539,28 @@ impl<TIM: ValidTim> CountDownTimer<TIM> {
self.tim.release()
}
/// Load the count down timer with a timeout but do not start it.
pub fn load(&mut self, timeout: impl Into<Hertz>) {
self.tim.reg().ctrl.modify(|_, w| w.enable().clear_bit());
self.curr_freq = timeout.into();
self.rst_val = self.sys_clk.0 / self.curr_freq.0;
unsafe {
self.tim.reg().rst_value.write(|w| w.bits(self.rst_val));
self.tim.reg().cnt_value.write(|w| w.bits(self.rst_val));
}
}
#[inline(always)]
pub fn enable(&mut self) {
self.tim.reg().ctrl.modify(|_, w| w.enable().set_bit());
}
#[inline(always)]
pub fn disable(&mut self) {
self.tim.reg().ctrl.modify(|_, w| w.enable().clear_bit());
}
/// Disable the counter, setting both enable and active bit to 0
pub fn auto_disable(self, enable: bool) -> Self {
if enable {
self.tim
@ -420,6 +576,10 @@ impl<TIM: ValidTim> CountDownTimer<TIM> {
self
}
/// This option only applies when the Auto-Disable functionality is 0.
///
/// The active bit is changed to 0 when count reaches 0, but the counter stays
/// enabled. When Auto-Disable is 1, Auto-Deactivate is implied
pub fn auto_deactivate(self, enable: bool) -> Self {
if enable {
self.tim
@ -435,6 +595,26 @@ impl<TIM: ValidTim> CountDownTimer<TIM> {
self
}
/// Configure the cascade parameters
pub fn cascade_control(&mut self, ctrl: CascadeCtrl) {
self.tim.reg().csd_ctrl.write(|w| {
w.csden0().bit(ctrl.enb_start_src_csd0);
w.csdinv0().bit(ctrl.inv_csd0);
w.csden1().bit(ctrl.enb_start_src_csd1);
w.csdinv1().bit(ctrl.inv_csd1);
w.dcasop().bit(ctrl.dual_csd_op);
w.csdtrg0().bit(ctrl.trg_csd0);
w.csdtrg1().bit(ctrl.trg_csd1);
w.csden2().bit(ctrl.enb_stop_src_csd2);
w.csdinv2().bit(ctrl.inv_csd2);
w.csdtrg2().bit(ctrl.trg_csd2)
});
}
csd_sel!(cascade_0_source, cascade0);
csd_sel!(cascade_1_source, cascade1);
csd_sel!(cascade_2_source, cascade2);
pub fn curr_freq(&self) -> Hertz {
self.curr_freq
}
@ -448,18 +628,13 @@ impl<TIM: ValidTim> CountDownTimer<TIM> {
impl<TIM: ValidTim> CountDown for CountDownTimer<TIM> {
type Time = Hertz;
#[inline]
fn start<T>(&mut self, timeout: T)
where
T: Into<Hertz>,
{
self.tim.reg().ctrl.modify(|_, w| w.enable().clear_bit());
self.curr_freq = timeout.into();
self.rst_val = self.sys_clk.0 / self.curr_freq.0;
unsafe {
self.tim.reg().rst_value.write(|w| w.bits(self.rst_val));
self.tim.reg().cnt_value.write(|w| w.bits(self.rst_val));
}
self.tim.reg().ctrl.modify(|_, w| w.enable().set_bit());
self.load(timeout);
self.enable();
}
/// Return `Ok` if the timer has wrapped. Peripheral will automatically clear the