This repository has been archived on 2024-06-16. You can view files and clone it, but cannot push or open issues or pull requests.
va108xx-hal/examples/pwm.rs
Robin Mueller f376a43f41
Some checks failed
Rust/va108xx-hal/pipeline/head There was a failure building this commit
Major refactoring
- Improved IRQ handling, which makes most unsafe unmask operations
  in user code absolete
- Add first UART RX handlers which use an IRQ
2021-12-19 14:18:10 +01:00

64 lines
2.2 KiB
Rust

//! Simple PWM example
#![no_main]
#![no_std]
use cortex_m_rt::entry;
use embedded_hal::PwmPin;
use panic_rtt_target as _;
use rtt_target::{rprintln, rtt_init_print};
use va108xx_hal::{
gpio::PinsA,
pac,
prelude::*,
pwm::{self, get_duty_from_percent, ReducedPwmPin, PWMA, PWMB},
timer::set_up_ms_delay_provider,
};
#[entry]
fn main() -> ! {
rtt_init_print!();
rprintln!("-- VA108xx PWM example application--");
let mut dp = pac::Peripherals::take().unwrap();
let pinsa = PinsA::new(&mut dp.SYSCONFIG, None, dp.PORTA);
let mut pwm = pwm::PwmPin::new(
(pinsa.pa3.into_funsel_1(), dp.TIM3),
50.mhz(),
&mut dp.SYSCONFIG,
10.hz(),
);
let mut delay = set_up_ms_delay_provider(&mut dp.SYSCONFIG, 50.mhz(), dp.TIM0);
let mut current_duty_cycle = 0.0;
PwmPin::set_duty(&mut pwm, get_duty_from_percent(current_duty_cycle));
PwmPin::enable(&mut pwm);
// Delete type information, increased code readibility for the rest of the code
let mut reduced_pin = ReducedPwmPin::from(pwm);
loop {
// Increase duty cycle continuously
while current_duty_cycle < 1.0 {
delay.delay_ms(200_u16);
current_duty_cycle += 0.02;
PwmPin::set_duty(&mut reduced_pin, get_duty_from_percent(current_duty_cycle));
}
// Switch to PWMB and decrease the window with a high signal from 100 % to 0 %
// continously
current_duty_cycle = 0.0;
let mut upper_limit = 1.0;
let mut lower_limit = 0.0;
let mut pwmb: ReducedPwmPin<PWMB> = ReducedPwmPin::from(reduced_pin);
pwmb.set_pwmb_lower_limit(get_duty_from_percent(lower_limit));
pwmb.set_pwmb_upper_limit(get_duty_from_percent(upper_limit));
while lower_limit < 0.5 {
delay.delay_ms(200_u16);
lower_limit += 0.01;
upper_limit -= 0.01;
pwmb.set_pwmb_lower_limit(get_duty_from_percent(lower_limit));
pwmb.set_pwmb_upper_limit(get_duty_from_percent(upper_limit));
rprintln!("Lower limit: {}", pwmb.pwmb_lower_limit());
rprintln!("Upper limit: {}", pwmb.pwmb_upper_limit());
}
reduced_pin = ReducedPwmPin::<PWMA>::from(pwmb);
}
}