rust/va108xx-rs
6
0
Fork 0
Code Issues Pull Requests Projects Releases 7 Wiki Activity
delete-some-re-exports
va108xx-rs/va108xx/svd/va108xx.svd

2734 lines
97 KiB
Plaintext
Raw Permalink Normal View History

New VA108xx Rust workspace structure + dependency updates - The workspace is now a monorepo without submodules. The HAL, PAC and BSP are integrated directly - Update all dependencies: embedded-hal v1 and RTIC v2
2024-06-16 16:16:45 +02:00
<?xml version="1.1" encoding="UTF-8"?>
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd">
<vendor>VORAGO TECHNOLOGIES</vendor>
<vendorID>SST</vendorID>
<name>va108xx</name>
<series>M0</series>
<version>1.1</version>
<description>ARM 32-bit Cortex-M0 Microcontroller based device, CPU clock up to 50MHz</description>
<licenseText>
VORAGO Technologies \n
\n
----------------------------------------------------------------------------\n
Copyright (c) 2013-2016 VORAGO Technologies\n
\n
BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND BY ALL THE TERMS\n
AND CONDITIONS OF THE VORAGO TECHNOLOGIES END USER LICENSE AGREEMENT. \n
\n
THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED\n
OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF\n
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.\n
VORAGO TECHNOLOGIES SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE\n
FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.\n
</licenseText>
<cpu>
<name>CM0</name>
<revision>r0p0</revision>
<endian>little</endian>
<mpuPresent>false</mpuPresent>
<fpuPresent>false</fpuPresent>
<nvicPrioBits>2</nvicPrioBits>
<vendorSystickConfig>false</vendorSystickConfig>
</cpu>
<headerSystemFilename>system_VA108xx</headerSystemFilename>
<headerDefinitionsPrefix>VOR_</headerDefinitionsPrefix>
<addressUnitBits>8</addressUnitBits><!--byte addressable memory-->
<width>32</width><!--bus width is 32 bits-->
<!-- registerPropertiesGroup: default settings implicitly inherited by subsequent sections -->
<size>32</size>
<access>read-write</access><!-- default size (number of bits) of all peripherals -->
<resetValue>0x00000000</resetValue><!-- by default all bits of the registers are initialized to 0 on reset -->
<resetMask>0xFFFFFFFF</resetMask><!-- by default all 32Bits of the registers are used -->
<peripherals>
<!-- **************************************************************************************** -->
<!--System Configuration Peripheral-->
<peripheral>
<name>SYSCONFIG</name>
<version>1.0</version>
<description>System Configuration Peripheral</description>
<baseAddress>0x40000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>RST_STAT</name>
<description>System Reset Status</description>
<addressOffset>0x000</addressOffset>
<access>read-write</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>POR</name>
<description>Power On Reset Status</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>EXTRST</name>
<description>External Reset Status</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>SYSRSTREQ</name>
<description>SYSRESETREQ Reset Status</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>LOOKUP</name>
<description>LOOKUP Reset Status</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>WATCHDOG</name>
<description>WATCHDOG Reset Status</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>MEMERR</name>
<description>Memory Error Reset Status</description>
<bitRange>[5:5]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="RST_STAT">
<name>RST_CNTL_ROM</name>
<description>ROM Reset Control</description>
<addressOffset>0x004</addressOffset>
<resetValue>0x0000001F</resetValue>
</register>
<register derivedFrom="RST_STAT">
<name>RST_CNTL_RAM</name>
<description>RAM Reset Control</description>
<addressOffset>0x008</addressOffset>
<resetValue>0x0000001F</resetValue>
</register>
<register>
<name>ROM_PROT</name>
<description>ROM Protection Configuration</description>
<addressOffset>0x00C</addressOffset>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>WREN</name>
<description>ROM Write Enable Bit</description>
<bitRange>[0:0]</bitRange>
</field>
</fields>
</register>
<register>
<name>ROM_SCRUB</name>
<description>ROM Scrub Period Configuration</description>
<addressOffset>0x010</addressOffset>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VALUE</name>
<description>Counter divide value</description>
<bitRange>[23:0]</bitRange>
</field>
<field>
<name>RESET</name>
<description>Reset Counter</description>
<bitRange>[31:31]</bitRange>
<access>write-only</access>
<modifiedWriteValues>oneToClear</modifiedWriteValues>
</field>
</fields>
</register>
<register derivedFrom="ROM_SCRUB">
<name>RAM_SCRUB</name>
<description>RAM Scrub Period Configuration</description>
<addressOffset>0x014</addressOffset>
</register>
<register>
<name>ROM_TRAP_ADDR</name>
<description>ROM Trap Address</description>
<addressOffset>0x018</addressOffset>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Trap Address Match Bits</description>
<bitRange>[15:2]</bitRange>
</field>
<field>
<name>ENABLE</name>
<description>Trap Enable Bit</description>
<bitRange>[31:31]</bitRange>
</field>
</fields>
</register>
<register>
<name>ROM_TRAP_SYND</name>
<description>ROM Trap Syndrome</description>
<addressOffset>0x01C</addressOffset>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYND</name>
<description>Trap Syndrom Bits</description>
<bitRange>[19:0]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="ROM_TRAP_ADDR">
<name>RAM_TRAP_ADDR</name>
<description>RAM Trap Address</description>
<addressOffset>0x020</addressOffset>
</register>
<register derivedFrom="ROM_TRAP_SYND">
<name>RAM_TRAP_SYND</name>
<description>RAM Trap Syndrome</description>
<addressOffset>0x024</addressOffset>
</register>
<register>
<name>IRQ_ENB</name>
<description>Enable EDAC Error Interrupt Register</description>
<addressOffset>0x028</addressOffset>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RAMSBE</name>
<description>RAM Single Bit Interrupt</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>RAMMBE</name>
<description>RAM Multi Bit Interrupt</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>ROMSBE</name>
<description>ROM Single Bit Interrupt</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>ROMMBE</name>
<description>ROM Multi Bit Interrupt</description>
<bitRange>[3:3]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_RAW</name>
<description>Raw EDAC Error Interrupt Status</description>
<addressOffset>0x02C</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_END</name>
<description>Enabled EDAC Error Interrupt Status</description>
<addressOffset>0x030</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_CLR</name>
<description>Clear EDAC Error Interrupt Status</description>
<addressOffset>0x034</addressOffset>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<modifiedWriteValues>oneToClear</modifiedWriteValues>
</register>
<register>
<name>RAM_SBE</name>
<description>Count of RAM EDAC Single Bit Errors</description>
<addressOffset>0x038</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register derivedFrom="RAM_SBE">
<name>RAM_MBE</name>
<description>Count of RAM EDAC Multi Bit Errors</description>
<addressOffset>0x03C</addressOffset>
</register>
<register derivedFrom="RAM_SBE">
<name>ROM_SBE</name>
<description>Count of ROM EDAC Single Bit Errors</description>
<addressOffset>0x040</addressOffset>
</register>
<register derivedFrom="RAM_SBE">
<name>ROM_MBE</name>
<description>Count of ROM EDAC Multi Bit Errors</description>
<addressOffset>0x044</addressOffset>
</register>
<register>
<name>IOCONFIG_CLKDIV0</name>
<description>IO Configuration Clock Divider Register</description>
<addressOffset>0x048</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<dim>7</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>1-7</dimIndex>
<name>IOCONFIG_CLKDIV%s</name>
<description>IO Configuration Clock Divider Register</description>
<addressOffset>0x04C</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>ROM_RETRIES</name>
<description>ROM BOOT Retry count</description>
<addressOffset>0x068</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>REFRESH_CONFIG</name>
<description>Register Refresh Control</description>
<addressOffset>0x06C</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>TIM_RESET</name>
<description>TIM Reset Control</description>
<addressOffset>0x070</addressOffset>
<resetValue>0xFFFFFFFF</resetValue>
</register>
<register>
<name>TIM_CLK_ENABLE</name>
<description>TIM Enable Control</description>
<addressOffset>0x074</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PERIPHERAL_RESET</name>
<description>Peripheral Reset Control</description>
<addressOffset>0x078</addressOffset>
<resetValue>0xFFFFFFFF</resetValue>
</register>
<register>
<name>PERIPHERAL_CLK_ENABLE</name>
<description>Peripheral Enable Control</description>
<addressOffset>0x07C</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>LOCKUP_RESET</name>
<description>Lockup Reset Configuration</description>
<addressOffset>0x080</addressOffset>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>LREN</name>
<description>Lockup Reset Enable Bit</description>
<bitRange>[0:0]</bitRange>
</field>
</fields>
</register>
<register>
<name>EF_CONFIG</name>
<description>EFuse Config Register</description>
<addressOffset>0xff0</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>EF_ID</name>
<description>EFuse ID Register</description>
<addressOffset>0xff4</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PROCID</name>
<description>Processor ID Register</description>
<addressOffset>0xff8</addressOffset>
<access>read-only</access>
<resetValue>0x040017e3</resetValue>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x008007e1</resetValue>
</register>
</registers>
</peripheral>
<!-- **************************************************************************************** -->
<!--Interrupt Redirect Selector-->
<peripheral>
<name>IRQSEL</name>
<version>1.0</version>
<description>Interrupt Selector Peripheral</description>
<baseAddress>0x40001000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>OC0</name>
<value>0</value>
</interrupt>
<interrupt>
<name>OC1</name>
<value>1</value>
</interrupt>
<interrupt>
<name>OC2</name>
<value>2</value>
</interrupt>
<interrupt>
<name>OC3</name>
<value>3</value>
</interrupt>
<interrupt>
<name>OC4</name>
<value>4</value>
</interrupt>
<interrupt>
<name>OC5</name>
<value>5</value>
</interrupt>
<interrupt>
<name>OC6</name>
<value>6</value>
</interrupt>
<interrupt>
<name>OC7</name>
<value>7</value>
</interrupt>
<interrupt>
<name>OC8</name>
<value>8</value>
</interrupt>
<interrupt>
<name>OC9</name>
<value>9</value>
</interrupt>
<interrupt>
<name>OC10</name>
<value>10</value>
</interrupt>
<interrupt>
<name>OC11</name>
<value>11</value>
</interrupt>
<interrupt>
<name>OC12</name>
<value>12</value>
</interrupt>
<interrupt>
<name>OC13</name>
<value>13</value>
</interrupt>
<interrupt>
<name>OC14</name>
<value>14</value>
</interrupt>
<interrupt>
<name>OC15</name>
<value>15</value>
</interrupt>
<interrupt>
<name>OC16</name>
<value>16</value>
</interrupt>
<interrupt>
<name>OC17</name>
<value>17</value>
</interrupt>
<interrupt>
<name>OC18</name>
<value>18</value>
</interrupt>
<interrupt>
<name>OC19</name>
<value>19</value>
</interrupt>
<interrupt>
<name>OC20</name>
<value>20</value>
</interrupt>
<interrupt>
<name>OC21</name>
<value>21</value>
</interrupt>
<interrupt>
<name>OC22</name>
<value>22</value>
</interrupt>
<interrupt>
<name>OC23</name>
<value>23</value>
</interrupt>
<interrupt>
<name>OC24</name>
<value>24</value>
</interrupt>
<interrupt>
<name>OC25</name>
<value>25</value>
</interrupt>
<interrupt>
<name>OC26</name>
<value>26</value>
</interrupt>
<interrupt>
<name>OC27</name>
<value>27</value>
</interrupt>
<interrupt>
<name>OC28</name>
<value>28</value>
</interrupt>
<interrupt>
<name>OC29</name>
<value>29</value>
</interrupt>
<interrupt>
<name>OC30</name>
<value>30</value>
</interrupt>
<interrupt>
<name>OC31</name>
<value>31</value>
</interrupt>
<registers>
<register>
<name>INT_RAM_SBE</name>
<description>Internal Memory RAM SBE Interrupt Redirect Selection</description>
<addressOffset>0x01C0</addressOffset>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>PORTA[%s]</name>
<description>PORTA Interrupt Redirect Selection</description>
<addressOffset>0x000</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>PORTB[%s]</name>
<description>PORTB Interrupt Redirect Selection</description>
<addressOffset>0x080</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>TIM[%s]</name>
<description>TIM Interrupt Redirect Selection</description>
<addressOffset>0x100</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>UART[%s]</name>
<description>UART Interrupt Redirect Selection</description>
<addressOffset>0x180</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>SPI[%s]</name>
<description>SPI Interrupt Redirect Selection</description>
<addressOffset>0x190</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>I2C_MS[%s]</name>
<description>Master I2C Interrupt Redirect Selection</description>
<addressOffset>0x01a0</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>I2C_SL[%s]</name>
<description>Slave I2C Interrupt Redirect Selection</description>
<addressOffset>0x01B0</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<name>INT_RAM_MBE</name>
<description>Internal Memory RAM MBE Interrupt Redirect Selection</description>
<addressOffset>0x01C4</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<name>INT_ROM_SBE</name>
<description>Internal Memory ROM SBE Interrupt Redirect Selection</description>
<addressOffset>0x01C8</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<name>INT_ROM_MBE</name>
<description>Internal Memory ROM MBE Interrupt Redirect Selection</description>
<addressOffset>0x01CC</addressOffset>
</register>
<register derivedFrom="INT_RAM_SBE">
<name>TXEV</name>
<description>Processor TXEV Interrupt Redirect Selection</description>
<addressOffset>0x01D0</addressOffset>
</register>
<register>
<name>NMI</name>
<description>NMI Status Register</description>
<addressOffset>0x8f8</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ACTIVE</name>
<description>Active</description>
<bitRange>[0:0]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="NMI">
<name>RXEV</name>
<description>RXEV Status Register</description>
<addressOffset>0x8f4</addressOffset>
</register>
<register derivedFrom="NMI">
<name>WATCHDOG</name>
<description>WATCHDOG Status Register</description>
<addressOffset>0x8f0</addressOffset>
</register>
<register derivedFrom="NMI">
<name>MERESET</name>
<description>MERESET Status Register</description>
<addressOffset>0x8ec</addressOffset>
</register>
<register derivedFrom="NMI">
<name>EDBGRQ</name>
<description>EDBGRQ Status Register</description>
<addressOffset>0x8e8</addressOffset>
</register>
<register derivedFrom="NMI">
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>IRQS[%s]</name>
<description>Interrupt Status Register</description>
<addressOffset>0x800</addressOffset>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x008007e1</resetValue>
</register>
</registers>
</peripheral>
<!-- **************************************************************************************** -->
<!--IO Pin Configuration-->
<peripheral>
<name>IOCONFIG</name>
<version>1.0</version>
<description>IO Pin Configuration Peripheral</description>
<baseAddress>0x40002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>PORTA[%s]</name>
<description>PORTA Pin Configuration Register</description>
<addressOffset>0x000</addressOffset>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLTTYPE</name>
<description>Input Filter Selectoin</description>
<bitRange>[2:0]</bitRange>
<enumeratedValues>
<enumeratedValue>
<name>SYNC</name>
<description>Synchronize to system clock</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIRECT</name>
<description>Direct input, no synchronization</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER1</name>
<description>Require 2 samples to have the same value</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER2</name>
<description>Require 3 samples to have the same value</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER3</name>
<description>Require 4 samples to have the same value</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER4</name>
<description>Require 5 samples to have the same value</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FLTCLK</name>
<description>Input Filter Clock Selection</description>
<bitRange>[5:3]</bitRange>
</field>
<field>
<name>INVINP</name>
<description>Input Invert Selection</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>IEWO</name>
<description>Input Enable While Output enabled</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>OPENDRN</name>
<description>Output Open Drain Mode</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>INVOUT</name>
<description>Output Invert Selection</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>PLEVEL</name>
<description>Internal Pull up/down level</description>
<bitRange>[10:10]</bitRange>
</field>
<field>
<name>PEN</name>
<description>Enable Internal Pull up/down </description>
<bitRange>[11:11]</bitRange>
</field>
<field>
<name>PWOA</name>
<description>Enable Pull when output active </description>
<bitRange>[12:12]</bitRange>
</field>
<field>
<name>FUNSEL</name>
<description>Pin Function Selection</description>
<bitRange>[15:13]</bitRange>
</field>
<field>
<name>IODIS</name>
<description>IO Pin Disable</description>
<bitRange>[16:16]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="PORTA[%s]">
<name>PORTB[%s]</name>
<description>PORTB Pin Configuration Register</description>
<addressOffset>0x0080</addressOffset>
<resetValue>0x00000800</resetValue>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x008207e1</resetValue>
</register>
</registers>
</peripheral>
<!-- **************************************************************************************** -->
<!--Utility Configuration-->
<peripheral>
<name>UTILITY</name>
<version>1.0</version>
<description>Utility Peripheral</description>
<baseAddress>0x40003000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>SYND_DATA0</name>
<description>Synd Data 0 Register</description>
<addressOffset>0x000</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_DATA1</name>
<description>Synd Data 1 Register</description>
<addressOffset>0x004</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_SYND</name>
<description>Synd Parity Register</description>
<addressOffset>0x008</addressOffset>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_ENC_32</name>
<description>Synd 32 bit Encoded Syndrome</description>
<addressOffset>0x00c</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_32_DATA</name>
<description>Synd 32 bit Corrected Data</description>
<addressOffset>0x010</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_32_SYND</name>
<description>Synd 32 bit Corrected Syndrome and Status</description>
<addressOffset>0x014</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_ENC_64</name>
<description>Synd 64 bit Encoded Syndrome</description>
<addressOffset>0x018</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_64_DATA0</name>
<description>Synd 64 bit Corrected Data 0</description>
<addressOffset>0x01c</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_64_DATA1</name>
<description>Synd 64 bit Corrected Data 1</description>
<addressOffset>0x020</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_64_SYND</name>
<description>Synd 64 bit Corrected Parity and Status</description>
<addressOffset>0x024</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_ENC_32_52</name>
<description>Synd 32/52 bit Encoded Syndrome</description>
<addressOffset>0x028</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_32_52_DATA</name>
<description>Synd 32/52 bit Corrected Data</description>
<addressOffset>0x02c</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SYND_CHECK_32_52_SYND</name>
<description>Synd 32/52 bit Corrected Syndrome and Status</description>
<addressOffset>0x030</addressOffset>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x008207e1</resetValue>
</register>
</registers>
</peripheral>
<!-- **************************************************************************************** -->
<!--General Purpose IOs -->
<peripheral>
<name>PORTA</name>
<version>1.0</version>
<description>GPIO Peripheral</description>
<groupName>GPIO</groupName>
<baseAddress>0x50000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<!-- <headerStructName>GPIO_PERIPHERAL</headerStructName> -->
<registers>
<register>
<name>DATAIN</name>
<description>Data In Register</description>
<addressOffset>0x000</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<dim>4</dim>
<dimIncrement>1</dimIncrement>
<name>DATAINBYTE[%s]</name>
<description>Data In Register by Byte</description>
<alternateRegister>DATAIN</alternateRegister>
<addressOffset>0x000</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAIN">
<name>DATAINRAW</name>
<description>Data In Raw Register</description>
<addressOffset>0x004</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAINBYTE[%s]">
<name>DATAINRAWBYTE[%s]</name>
<description>Data In Raw Register by Byte</description>
<alternateRegister>DATAINRAW</alternateRegister>
<addressOffset>0x004</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>DATAOUT</name>
<description>Data Out Register</description>
<addressOffset>0x008</addressOffset>
<access>write-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<dim>4</dim>
<dimIncrement>1</dimIncrement>
<name>DATAOUTBYTE[%s]</name>
<description>Data Out Register by Byte</description>
<alternateRegister>DATAOUT</alternateRegister>
<addressOffset>0x008</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUT">
<name>DATAOUTRAW</name>
<description>Data Out Register</description>
<addressOffset>0x00c</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUTBYTE[%s]">
<name>DATAOUTRAWBYTE[%s]</name>
<description>Data Out Register by Byte</description>
<alternateRegister>DATAOUTRAW</alternateRegister>
<addressOffset>0x00c</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUT">
<name>SETOUT</name>
<description>Set Out Register</description>
<addressOffset>0x010</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUTBYTE[%s]">
<name>SETOUTBYTE[%s]</name>
<description>Set Out Register by Byte</description>
<alternateRegister>SETOUT</alternateRegister>
<addressOffset>0x010</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUT">
<name>CLROUT</name>
<description>Clear Out Register</description>
<addressOffset>0x014</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUTBYTE[%s]">
<name>CLROUTBYTE[%s]</name>
<description>Clear Out Register by Byte</description>
<alternateRegister>CLROUT</alternateRegister>
<addressOffset>0x014</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUT">
<name>TOGOUT</name>
<description>Toggle Out Register</description>
<addressOffset>0x018</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAOUTBYTE[%s]">
<name>TOGOUTBYTE[%s]</name>
<description>Toggle Out Register by Byte</description>
<alternateRegister>TOGOUT</alternateRegister>
<addressOffset>0x018</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>DATAMASK</name>
<description>Data mask Register</description>
<addressOffset>0x01c</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<dim>4</dim>
<dimIncrement>1</dimIncrement>
<name>DATAMASKBYTE[%s]</name>
<description>Data Out Register by Byte</description>
<alternateRegister>DATAMASK</alternateRegister>
<addressOffset>0x01c</addressOffset>
<size>8</size>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASK">
<name>DIR</name>
<description>Direction Register (1:Output, 0:Input)</description>
<addressOffset>0x020</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASKBYTE[%s]">
<name>DIRBYTE[%s]</name>
<description>Direction Register by Byte</description>
<alternateRegister>DIR</alternateRegister>
<addressOffset>0x020</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASK">
<name>PULSE</name>
<description>Pulse Mode Register</description>
<addressOffset>0x024</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASKBYTE[%s]">
<name>PULSEBYTE[%s]</name>
<description>Pulse Mode Register by Byte</description>
<alternateRegister>PULSE</alternateRegister>
<addressOffset>0x024</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASK">
<name>PULSEBASE</name>
<description>Pulse Base Value Register</description>
<addressOffset>0x028</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASKBYTE[%s]">
<name>PULSEBASEBYTE[%s]</name>
<description>Pulse Base Mode Register by Byte</description>
<alternateRegister>PULSEBASE</alternateRegister>
<addressOffset>0x028</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASK">
<name>DELAY1</name>
<description>Delay1 Register</description>
<addressOffset>0x02c</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASKBYTE[%s]">
<name>DELAY1BYTE[%s]</name>
<description>Delay1 Register by Byte</description>
<alternateRegister>DELAY1</alternateRegister>
<addressOffset>0x02c</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASK">
<name>DELAY2</name>
<description>Delay2 Register</description>
<addressOffset>0x030</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="DATAMASKBYTE[%s]">
<name>DELAY2BYTE[%s]</name>
<description>Delay2 Register by Byte</description>
<alternateRegister>DELAY2</alternateRegister>
<addressOffset>0x030</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_SEN</name>
<description>Interrupt Sense Register (1:Level Sensitive, 0:Edge Sensitive)</description>
<addressOffset>0x034</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_EDGE</name>
<description>Interrupt Both Edge Register (1:Both Edges, 0:Single Edge)</description>
<addressOffset>0x038</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_EVT</name>
<description>Interrupt Event Register (1:HighLevel/L->H Edge, 0:LowLevel/H->L Edge)</description>
<addressOffset>0x03c</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_ENB</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x040</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_RAW</name>
<description>Raw Interrupt Status</description>
<addressOffset>0x044</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_END</name>
<description>Masked Interrupt Status</description>
<addressOffset>0x048</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>EDGE_STATUS</name>
<description>Edge Status Register</description>
<addressOffset>0x04c</addressOffset>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x001007e1</resetValue>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="PORTA">
<name>PORTB</name>
<baseAddress>0x50001000</baseAddress>
</peripheral>
<!-- **************************************************************************************** -->
<!--Real Time Counter-->
<peripheral>
<name>TIM0</name>
<version>1.0</version>
<description>Timer/Counter Peripheral</description>
<groupName>Timer_Counter</groupName>
<baseAddress>0x40020000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<!-- <headerStructName>TIM_PERIPHERAL</headerStructName> -->
<registers>
<register>
<name>CTRL</name>
<description>Control Register</description>
<addressOffset>0x000</addressOffset>
<access>read-write</access>
<fields>
<field>
<name>ENABLE</name>
<description>Counter Enable</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>ACTIVE</name>
<description>Counter Active</description>
<bitRange>[1:1]</bitRange>
<access>read-only</access>
</field>
<field>
<name>AUTO_DISABLE</name>
<description>Auto Disables the counter (set ENABLE to 0) when the count reaches 0</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>AUTO_DEACTIVATE</name>
<description>Auto Deactivate the counter (set ACTIVE to 0) when the count reaches 0</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>IRQ_ENB</name>
<description>Interrupt Enable</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>STATUS_SEL</name>
<description>Counter Status Selection</description>
<bitRange>[7:5]</bitRange>
<enumeratedValues>
<enumeratedValue>
<name>DONE</name>
<description>Single cycle pulse when the counter reaches 0</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTIVE</name>
<description>Returns the counter ACTIVE bit</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggles the STATUS bit everytime the counter reaches 0. Basically a divide by 2 counter output.</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>PWMA</name>
<description>Selects the Pulse Width Modulated output. It 1 when the counter value is &gt;= the PWMA_VALUE</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>PWMB</name>
<description>Selects the Pulse Width Modulated output. It 1 when the counter value is &lt; the PWMA_VALUE and value is &gt; PWMA_VALUE</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Returns the counter ENABLED bit</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWMA_ACTIVE</name>
<description>Selects the Pulse Width Modulated output. It 1 when the counter value is &lt;= the PWMA_VALUE and value is &gt;= 0</description>
<value>6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STATUS_INV</name>
<description>Invert the Output Status</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>REQ_STOP</name>
<description>Stop Request</description>
<bitRange>[9:9]</bitRange>
</field>
</fields>
</register>
<register>
<name>RST_VALUE</name>
<description>The value that counter start from after reaching 0.</description>
<addressOffset>0x004</addressOffset>
</register>
<register>
<name>CNT_VALUE</name>
<description>The current value of the counter</description>
<addressOffset>0x008</addressOffset>
</register>
<register>
<name>ENABLE</name>
<description>Alternate access to the Counter ENABLE bit in the CTRL Register</description>
<addressOffset>0x00c</addressOffset>
<fields>
<field>
<name>ENABLE</name>
<description>Counter Enable</description>
<bitRange>[0:0]</bitRange>
</field>
</fields>
</register>
<register>
<name>CSD_CTRL</name>
<description>The Cascade Control Register. Controls the counter external enable signals</description>
<addressOffset>0x010</addressOffset>
<fields>
<field>
<name>CSDEN0</name>
<description>Cascade 0 Enable</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>CSDINV0</name>
<description>Cascade 0 Invert</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>CSDEN1</name>
<description>Cascade 1 Enable</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>CSDINV1</name>
<description>Cascade 1 Invert</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>DCASOP</name>
<description>Dual Cascade Operation (0:AND, 1:OR)</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>CSDTRG0</name>
<description>Cascade 0 Enabled as Trigger</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>CSDTRG1</name>
<description>Cascade 1 Enabled as Trigger</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>CSDEN2</name>
<description>Cascade 2 Enable</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>CSDINV2</name>
<description>Cascade 2 Invert</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>CSDXXX2</name>
<description>Cascade 2 test mode</description>
<bitRange>[11:11]</bitRange>
</field>
</fields>
</register>
<register>
<name>CASCADE0</name>
<description>Cascade Enable Selection</description>
<addressOffset>0x014</addressOffset>
<fields>
<field>
<name>CASSEL</name>
<description>Cascade Selection</description>
<bitRange>[7:0]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="CASCADE0">
<name>CASCADE1</name>
<description>Cascade Enable Selection</description>
<addressOffset>0x018</addressOffset>
</register>
<register derivedFrom="CASCADE0">
<name>CASCADE2</name>
<description>Cascade Enable Selection</description>
<addressOffset>0x01c</addressOffset>
</register>
<register>
<name>PWM_VALUE</name>
<description>The Pulse Width Modulation Value</description>
<addressOffset>0x020</addressOffset>
</register>
<register>
<name>PWMA_VALUE</name>
<description>The Pulse Width Modulation ValueA</description>
<alternateRegister>PWM_VALUE</alternateRegister>
<addressOffset>0x020</addressOffset>
</register>
<register>
<name>PWMB_VALUE</name>
<description>The Pulse Width Modulation ValueB</description>
<addressOffset>0x024</addressOffset>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x001107e1</resetValue>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM1</name>
<baseAddress>0x40021000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM2</name>
<baseAddress>0x40022000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM3</name>
<baseAddress>0x40023000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM4</name>
<baseAddress>0x40024000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM5</name>
<baseAddress>0x40025000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM6</name>
<baseAddress>0x40026000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM7</name>
<baseAddress>0x40027000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM8</name>
<baseAddress>0x40028000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM9</name>
<baseAddress>0x40029000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM10</name>
<baseAddress>0x4002a000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM11</name>
<baseAddress>0x4002b000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM12</name>
<baseAddress>0x4002c000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM13</name>
<baseAddress>0x4002d000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM14</name>
<baseAddress>0x4002e000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM15</name>
<baseAddress>0x4002f000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM16</name>
<baseAddress>0x40030000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM17</name>
<baseAddress>0x40031000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM18</name>
<baseAddress>0x40032000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM19</name>
<baseAddress>0x40033000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM20</name>
<baseAddress>0x40034000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM21</name>
<baseAddress>0x40035000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM22</name>
<baseAddress>0x40036000</baseAddress>
</peripheral>
<peripheral derivedFrom="TIM0">
<name>TIM23</name>
<baseAddress>0x40037000</baseAddress>
</peripheral>
<!-- **************************************************************************************** -->
<!-- UART -->
<peripheral>
<name>UARTA</name>
<version>1.0</version>
<description>UART Peripheral</description>
<groupName>UART</groupName>
<baseAddress>0x40040000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<!-- <headerStructName>UART_PERIPHERAL</headerStructName> -->
<registers>
<register>
<name>DATA</name>
<description>Data In/Out Register</description>
<addressOffset>0x000</addressOffset>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>ENABLE</name>
<description>Enable Register</description>
<addressOffset>0x004</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>RXENABLE</name>
<description>Rx Enable</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>TXENABLE</name>
<description>Tx Enable</description>
<bitRange>[1:1]</bitRange>
</field>
</fields>
</register>
<register>
<name>CTRL</name>
<description>Control Register</description>
<addressOffset>0x008</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>PAREN</name>
<description>Parity Enable</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>PAREVEN</name>
<description>Parity Even/Odd(1/0)</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>PARSTK</name>
<description>Parity Sticky</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>STOPBITS</name>
<description>Stop Bits 1/2(0/1)</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>WORDSIZE</name>
<description>Word Size in Bits 5/6/7/8(00/01/10/11)</description>
<bitRange>[5:4]</bitRange>
</field>
<field>
<name>LOOPBACK</name>
<description>Loopback Enable</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>LOOPBACKBLK</name>
<description>Loopback Block</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>AUTOCTS</name>
<description>Enable Auto CTS mode</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>DEFRTS</name>
<description>Default RTSn value</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>AUTORTS</name>
<description>Enable Auto RTS mode</description>
<bitRange>[10:10]</bitRange>
</field>
<field>
<name>BAUD8</name>
<description>Enable BAUD8 mode</description>
<bitRange>[11:11]</bitRange>
</field>
</fields>
</register>
<register>
<name>CLKSCALE</name>
<description>Clock Scale Register</description>
<addressOffset>0x00c</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>FRAC</name>
<description>Fractional Divide (64ths)</description>
<bitRange>[5:0]</bitRange>
</field>
<field>
<name>INT</name>
<description>Integer Divide</description>
<bitRange>[23:6]</bitRange>
</field>
<field>
<name>RESET</name>
<description>Reset Baud Counter</description>
<bitRange>[31:31]</bitRange>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RXSTATUS</name>
<description>Status Register</description>
<addressOffset>0x010</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>RDAVL</name>
<description>Read Data Available</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>RDNFULL</name>
<description>Read Fifo NOT Full</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>RXBUSY</name>
<description>RX Busy Receiving</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>RXTO</name>
<description>RX Receive Timeout</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>RXOVR</name>
<description>Read Fifo Overflow</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>RXFRM</name>
<description>RX Framing Error</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>RXPAR</name>
<description>RX Parity Error</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>RXBRK</name>
<description>RX Break Error</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>RXBUSYBRK</name>
<description>RX Busy Receiving Break</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>RXADDR9</name>
<description>Address Match for 9 bit mode</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>RXRTSN</name>
<description>RX RTSn Output Value</description>
<bitRange>[15:15]</bitRange>
</field>
</fields>
</register>
<register>
<name>TXSTATUS</name>
<description>Status Register</description>
<addressOffset>0x014</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>WRRDY</name>
<description>Write Fifo NOT Full</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>WRBUSY</name>
<description>Write Fifo Full</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>TXBUSY</name>
<description>TX Busy Transmitting</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>WRLOST</name>
<description>Write Data Lost (Fifo Overflow)</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>TXCTSN</name>
<description>TX CTSn Input Value</description>
<bitRange>[15:15]</bitRange>
</field>
</fields>
</register>
<register>
<name>FIFO_CLR</name>
<description>Clear FIFO Register</description>
<addressOffset>0x018</addressOffset>
<access>write-only</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>RXSTS</name>
<description>Clear Rx Status</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>TXSTS</name>
<description>Clear Tx Status</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>RXFIFO</name>
<description>Clear Rx FIFO</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>TXFIFO</name>
<description>Clear Tx FIFO</description>
<bitRange>[3:3]</bitRange>
</field>
</fields>
</register>
<register>
<name>TXBREAK</name>
<description>Break Transmit Register</description>
<addressOffset>0x01c</addressOffset>
<access>write-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>ADDR9</name>
<description>Address9 Register</description>
<addressOffset>0x020</addressOffset>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>ADDR9MASK</name>
<description>Address9 Mask Register</description>
<addressOffset>0x024</addressOffset>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>IRQ_ENB</name>
<description>IRQ Enable Register</description>
<addressOffset>0x028</addressOffset>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>IRQ_RX</name>
<description>RX Interrupt</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>IRQ_RX_STATUS</name>
<description>RX Status Interrupt</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>IRQ_RX_TO</name>
<description>RX Timeout Interrupt</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>IRQ_TX</name>
<description>TX Interrupt</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>IRQ_TX_STATUS</name>
<description>TX Status Interrupt</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>IRQ_TX_EMPTY</name>
<description>TX Empty Interrupt</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>IRQ_TX_CTS</name>
<description>TX CTS Change Interrupt</description>
<bitRange>[7:7]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_RAW</name>
<description>IRQ Raw Status Register</description>
<addressOffset>0x02c</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_END</name>
<description>IRQ Enabled Status Register</description>
<addressOffset>0x030</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_CLR</name>
<description>IRQ Clear Status Register</description>
<addressOffset>0x034</addressOffset>
<access>write-only</access>
<resetValue>0x0000000</resetValue>
</register>
<register>
<name>RXFIFOIRQTRG</name>
<description>Rx FIFO IRQ Trigger Level</description>
<addressOffset>0x038</addressOffset>
</register>
<register>
<name>TXFIFOIRQTRG</name>
<description>Tx FIFO IRQ Trigger Level</description>
<addressOffset>0x03c</addressOffset>
</register>
<register>
<name>RXFIFORTSTRG</name>
<description>Rx FIFO RTS Trigger Level</description>
<addressOffset>0x040</addressOffset>
</register>
<register>
<name>STATE</name>
<description>Internal STATE of UART Controller</description>
<addressOffset>0x044</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x001207e1</resetValue>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="UARTA">
<name>UARTB</name>
<baseAddress>0x40041000</baseAddress>
</peripheral>
<!-- **************************************************************************************** -->
<!-- SPI -->
<peripheral>
<name>SPIA</name>
<version>1.0</version>
<description>SPI Peripheral</description>
<groupName>SPI</groupName>
<baseAddress>0x40050000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<!-- <headerStructName>SPI_PERIPHERAL</headerStructName> -->
<registers>
<register>
<name>CTRL0</name>
<description>Control Register 0</description>
<addressOffset>0x000</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>SIZE</name>
<description>Data Size(0x3=>4, 0xf=>16)</description>
<bitRange>[3:0]</bitRange>
</field>
<field>
<name>SPO</name>
<description>SPI Clock Polarity</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>SPH</name>
<description>SPI Clock Phase</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>SCRDV</name>
<description>Serial Clock Rate divide+1 value</description>
<bitRange>[15:8]</bitRange>
</field>
</fields>
</register>
<register>
<name>CTRL1</name>
<description>Control Register 1</description>
<addressOffset>0x004</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>LBM</name>
<description>Loop Back</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>MS</name>
<description>Master/Slave (0:Master, 1:Slave)</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>SOD</name>
<description>Slave output Disable</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>SS</name>
<description>Slave Select</description>
<bitRange>[6:4]</bitRange>
</field>
<field>
<name>BLOCKMODE</name>
<description>Block Mode Enable</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>BMSTART</name>
<description>Block Mode Start Status Enable</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>BMSTALL</name>
<description>Block Mode Stall Enable</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>MDLYCAP</name>
<description>Master Delayed Capture Enable</description>
<bitRange>[10:10]</bitRange>
</field>
<field>
<name>MTXPAUSE</name>
<description>Master Tx Pause Enable</description>
<bitRange>[11:11]</bitRange>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>Data Input/Output</description>
<addressOffset>0x008</addressOffset>
</register>
<register>
<name>STATUS</name>
<description>Status Register</description>
<addressOffset>0x00C</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>TFE</name>
<description>Transmit FIFO empty</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>TNF</name>
<description>Transmit FIFO not full</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>RNE</name>
<description>Receive FIFO not empty</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>RFF</name>
<description>Receive FIFO Full</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>BUSY</name>
<description>Busy</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>RXDATAFIRST</name>
<description>Pending Data is first Byte in BLOCKMODE</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>RXTRIGGER</name>
<description>RX FIFO Above Trigger Level</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>TXTRIGGER</name>
<description>TX FIFO Below Trigger Level</description>
<bitRange>[7:7]</bitRange>
</field>
</fields>
</register>
<register>
<name>CLKPRESCALE</name>
<description>Clock Pre Scale divide value</description>
<addressOffset>0x010</addressOffset>
</register>
<register>
<name>IRQ_ENB</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x014</addressOffset>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>RORIM</name>
<description>RX Overrun</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>RTIM</name>
<description>RX Timeout</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>RXIM</name>
<description>RX Fifo is at least half full</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>TXIM</name>
<description>TX Fifo is at least half empty</description>
<bitRange>[3:3]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_RAW</name>
<description>Raw Interrupt Status Register</description>
<addressOffset>0x018</addressOffset>
<access>read-only</access>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_END</name>
<description>Enabled Interrupt Status Register</description>
<addressOffset>0x01C</addressOffset>
<access>read-only</access>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_CLR</name>
<description>Clear Interrupt Status Register</description>
<addressOffset>0x020</addressOffset>
<access>write-only</access>
<modifiedWriteValues>oneToClear</modifiedWriteValues>
</register>
<register>
<name>RXFIFOIRQTRG</name>
<description>Rx FIFO IRQ Trigger Level</description>
<addressOffset>0x024</addressOffset>
</register>
<register>
<name>TXFIFOIRQTRG</name>
<description>Tx FIFO IRQ Trigger Level</description>
<addressOffset>0x028</addressOffset>
</register>
<register>
<name>FIFO_CLR</name>
<description>Clear FIFO Register</description>
<addressOffset>0x02c</addressOffset>
<access>write-only</access>
<fields>
<field>
<name>RXFIFO</name>
<description>Clear Rx FIFO</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>TXFIFO</name>
<description>Clear Tx FIFO</description>
<bitRange>[1:1]</bitRange>
</field>
</fields>
</register>
<register>
<name>STATE</name>
<description>Internal STATE of SPI Controller</description>
<addressOffset>0x030</addressOffset>
<access>read-only</access>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x001207e1</resetValue>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="SPIA">
<name>SPIB</name>
<baseAddress>0x40051000</baseAddress>
</peripheral>
<peripheral derivedFrom="SPIA">
<name>SPIC</name>
<baseAddress>0x40052000</baseAddress>
</peripheral>
<!-- **************************************************************************************** -->
<!-- I2C -->
<peripheral>
<name>I2CA</name>
<version>1.0</version>
<description>I2C Peripheral</description>
<groupName>I2C</groupName>
<baseAddress>0x40060000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x00001000</size>
<usage>registers</usage>
</addressBlock>
<!-- <headerStructName>I2C_PERIPHERAL</headerStructName> -->
<registers>
<!-- I2C Master ************************************************************ -->
<register>
<name>CTRL</name>
<description>Control Register</description>
<addressOffset>0x000</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>CLKENABLED</name>
<description>I2C CLK Enabled</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>ENABLED</name>
<description>I2C Activated</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>ENABLE</name>
<description>I2C Active</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>TXFEMD</name>
<description>TX FIFIO Empty Mode</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>RXFFMD</name>
<description>RX FIFO Full Mode</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>ALGFILTER</name>
<description>Enable Input Analog Glitch Filter</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>DLGFILTER</name>
<description>Enable Input Digital Glitch Filter</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>LOOPBACK</name>
<description>Enable LoopBack Mode</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>TMCONFIGENB</name>
<description>Enable Timing Config Register</description>
<bitRange>[9:9]</bitRange>
</field>
</fields>
</register>
<register>
<name>CLKSCALE</name>
<description>Clock Scale divide value</description>
<addressOffset>0x004</addressOffset>
<fields>
<field>
<name>VALUE</name>
<description>Enable FastMode</description>
<bitRange>[30:0]</bitRange>
</field>
<field>
<name>FASTMODE</name>
<description>Enable FastMode</description>
<bitRange>[31:31]</bitRange>
</field>
</fields>
</register>
<register>
<name>WORDS</name>
<description>Word Count value</description>
<addressOffset>0x008</addressOffset>
</register>
<register>
<name>ADDRESS</name>
<description>I2C Address value</description>
<addressOffset>0x00c</addressOffset>
</register>
<register>
<name>DATA</name>
<description>Data Input/Output</description>
<addressOffset>0x010</addressOffset>
</register>
<register>
<name>CMD</name>
<description>Command Register</description>
<addressOffset>0x014</addressOffset>
</register>
<register>
<name>STATUS</name>
<description>I2C Controller Status Register</description>
<addressOffset>0x018</addressOffset>
<fields>
<field>
<name>WAITING</name>
<description>Controller is Waiting</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>STALLED</name>
<description>Controller is Stalled</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>ARBLOST</name>
<description>I2C Arbitration was lost</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>NACKADDR</name>
<description>I2C Address was not Acknowledged</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>NACKDATA</name>
<description>I2C Data was not Acknowledged</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>RXNEMPTY</name>
<description>RX FIFO is Not Empty</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>RXFULL</name>
<description>RX FIFO is Full</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>RXTRIGGER</name>
<description>RX FIFO Above Trigger Level</description>
<bitRange>[11:11]</bitRange>
</field>
<field>
<name>TXEMPTY</name>
<description>TX FIFO is Empty</description>
<bitRange>[12:12]</bitRange>
</field>
<field>
<name>TXNFULL</name>
<description>TX FIFO is Full</description>
<bitRange>[13:13]</bitRange>
</field>
<field>
<name>TXTRIGGER</name>
<description>TX FIFO Below Trigger Level</description>
<bitRange>[15:15]</bitRange>
</field>
<field>
<name>RAW_SDA</name>
<description>I2C Raw SDA value</description>
<bitRange>[30:30]</bitRange>
</field>
<field>
<name>RAW_SCL</name>
<description>I2C Raw SCL value</description>
<bitRange>[31:31]</bitRange>
</field>
</fields>
</register>
<register>
<name>STATE</name>
<description>Internal STATE of I2C Master Controller</description>
<addressOffset>0x01c</addressOffset>
<access>read-only</access>
</register>
<register>
<name>TXCOUNT</name>
<description>TX Count Register</description>
<addressOffset>0x020</addressOffset>
<access>read-only</access>
</register>
<register>
<name>RXCOUNT</name>
<description>RX Count Register</description>
<addressOffset>0x024</addressOffset>
<access>read-only</access>
</register>
<register>
<name>IRQ_ENB</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x028</addressOffset>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>I2CIDLE</name>
<description>I2C Bus is Idle</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>IDLE</name>
<description>Controller is Idle</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>WAITING</name>
<description>Controller is Waiting</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>STALLED</name>
<description>Controller is Stalled</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>ARBLOST</name>
<description>I2C Arbitration was lost</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>NACKADDR</name>
<description>I2C Address was not Acknowledged</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>NACKDATA</name>
<description>I2C Data was not Acknowledged</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>CLKLOTO</name>
<description>I2C Clock Low Timeout</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>TXOVERFLOW</name>
<description>TX FIFO Overflowed</description>
<bitRange>[10:10]</bitRange>
</field>
<field>
<name>RXOVERFLOW</name>
<description>TX FIFO Overflowed</description>
<bitRange>[11:11]</bitRange>
</field>
<field>
<name>TXREADY</name>
<description>TX FIFO Ready</description>
<bitRange>[12:12]</bitRange>
</field>
<field>
<name>RXREADY</name>
<description>RX FIFO Ready</description>
<bitRange>[13:13]</bitRange>
</field>
<field>
<name>TXEMPTY</name>
<description>TX FIFO Empty</description>
<bitRange>[14:14]</bitRange>
</field>
<field>
<name>RXFULL</name>
<description>RX FIFO Full</description>
<bitRange>[15:15]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_RAW</name>
<description>Raw Interrupt Status Register</description>
<addressOffset>0x02c</addressOffset>
<access>read-only</access>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_END</name>
<description>Enabled Interrupt Status Register</description>
<addressOffset>0x030</addressOffset>
<access>read-only</access>
</register>
<register derivedFrom="IRQ_ENB">
<name>IRQ_CLR</name>
<description>Clear Interrupt Status Register</description>
<addressOffset>0x034</addressOffset>
<access>write-only</access>
<modifiedWriteValues>oneToClear</modifiedWriteValues>
</register>
<register>
<name>RXFIFOIRQTRG</name>
<description>Rx FIFO IRQ Trigger Level</description>
<addressOffset>0x038</addressOffset>
</register>
<register>
<name>TXFIFOIRQTRG</name>
<description>Tx FIFO IRQ Trigger Level</description>
<addressOffset>0x03c</addressOffset>
</register>
<register>
<name>FIFO_CLR</name>
<description>Clear FIFO Register</description>
<addressOffset>0x040</addressOffset>
<access>write-only</access>
<fields>
<field>
<name>RXFIFO</name>
<description>Clear Rx FIFO</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>TXFIFO</name>
<description>Clear Tx FIFO</description>
<bitRange>[1:1]</bitRange>
</field>
</fields>
</register>
<register>
<name>TMCONFIG</name>
<description>Timing Config Register</description>
<addressOffset>0x044</addressOffset>
</register>
<register>
<name>CLKTOLIMIT</name>
<description>Clock Low Timeout Limit Register</description>
<addressOffset>0x048</addressOffset>
</register>
<!-- I2C Slave ************************************************************ -->
<register>
<name>S0_CTRL</name>
<description>Slave Control Register</description>
<addressOffset>0x100</addressOffset>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>CLKENABLED</name>
<description>I2C Enabled</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>ENABLED</name>
<description>I2C Activated</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>ENABLE</name>
<description>I2C Active</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>TXFEMD</name>
<description>TX FIFIO Empty Mode</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>RXFFMD</name>
<description>RX FIFO Full Mode</description>
<bitRange>[4:4]</bitRange>
</field>
</fields>
</register>
<register>
<name>S0_MAXWORDS</name>
<description>Slave MaxWords Register</description>
<addressOffset>0x104</addressOffset>
</register>
<register>
<name>S0_ADDRESS</name>
<description>Slave I2C Address Value</description>
<addressOffset>0x108</addressOffset>
</register>
<register>
<name>S0_ADDRESSMASK</name>
<description>Slave I2C Address Mask value</description>
<addressOffset>0x10c</addressOffset>
</register>
<register>
<name>S0_DATA</name>
<description>Slave Data Input/Output</description>
<addressOffset>0x110</addressOffset>
</register>
<register>
<name>S0_LASTADDRESS</name>
<description>Slave I2C Last Address value</description>
<addressOffset>0x114</addressOffset>
<access>read-only</access>
</register>
<register>
<name>S0_STATUS</name>
<description>Slave I2C Controller Status Register</description>
<addressOffset>0x118</addressOffset>
<access>read-only</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>COMPLETED</name>
<description>Controller Complted a Transaction</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>IDLE</name>
<description>Controller is Idle</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>WAITING</name>
<description>Controller is Waiting</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>TXSTALLED</name>
<description>Controller is Tx Stalled</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>RXSTALLED</name>
<description>Controller is Rx Stalled</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>ADDRESSMATCH</name>
<description>I2C Address Match</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>NACKDATA</name>
<description>I2C Data was not Acknowledged</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>RXDATAFIRST</name>
<description>Pending Data is first Byte following Address</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>RXNEMPTY</name>
<description>RX FIFO is Not Empty</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>RXFULL</name>
<description>RX FIFO is Full</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>RXTRIGGER</name>
<description>RX FIFO Above Trigger Level</description>
<bitRange>[11:11]</bitRange>
</field>
<field>
<name>TXEMPTY</name>
<description>TX FIFO is Empty</description>
<bitRange>[12:12]</bitRange>
</field>
<field>
<name>TXNFULL</name>
<description>TX FIFO is Full</description>
<bitRange>[13:13]</bitRange>
</field>
<field>
<name>TXTRIGGER</name>
<description>TX FIFO Below Trigger Level</description>
<bitRange>[15:15]</bitRange>
</field>
<field>
<name>RAW_BUSY</name>
<description>I2C Raw Busy value</description>
<bitRange>[29:29]</bitRange>
</field>
<field>
<name>RAW_SDA</name>
<description>I2C Raw SDA value</description>
<bitRange>[30:30]</bitRange>
</field>
<field>
<name>RAW_SCL</name>
<description>I2C Raw SCL value</description>
<bitRange>[31:31]</bitRange>
</field>
</fields>
</register>
<register>
<name>S0_STATE</name>
<description>Internal STATE of I2C Slave Controller</description>
<addressOffset>0x11c</addressOffset>
<access>read-only</access>
</register>
<register>
<name>S0_TXCOUNT</name>
<description>Slave TX Count Register</description>
<addressOffset>0x120</addressOffset>
<access>read-only</access>
</register>
<register>
<name>S0_RXCOUNT</name>
<description>Slave RX Count Register</description>
<addressOffset>0x124</addressOffset>
<access>read-only</access>
</register>
<register>
<name>S0_IRQ_ENB</name>
<description>Slave Interrupt Enable Register</description>
<addressOffset>0x128</addressOffset>
<access>read-write</access>
<resetValue>0x0000000</resetValue>
<fields>
<field>
<name>COMPLETED</name>
<description>Controller Complted a Transaction</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>IDLE</name>
<description>Controller is Idle</description>
<bitRange>[1:1]</bitRange>
</field>
<field>
<name>WAITING</name>
<description>Controller is Waiting</description>
<bitRange>[2:2]</bitRange>
</field>
<field>
<name>TXSTALLED</name>
<description>Controller is Tx Stalled</description>
<bitRange>[3:3]</bitRange>
</field>
<field>
<name>RXSTALLED</name>
<description>Controller is Rx Stalled</description>
<bitRange>[4:4]</bitRange>
</field>
<field>
<name>ADDRESSMATCH</name>
<description>I2C Address Match</description>
<bitRange>[5:5]</bitRange>
</field>
<field>
<name>NACKDATA</name>
<description>I2C Data was not Acknowledged</description>
<bitRange>[6:6]</bitRange>
</field>
<field>
<name>RXDATAFIRST</name>
<description>Pending Data is first Byte following Address</description>
<bitRange>[7:7]</bitRange>
</field>
<field>
<name>I2C_START</name>
<description>I2C Start Condition</description>
<bitRange>[8:8]</bitRange>
</field>
<field>
<name>I2C_STOP</name>
<description>I2C Stop Condition</description>
<bitRange>[9:9]</bitRange>
</field>
<field>
<name>TXUNDERFLOW</name>
<description>TX FIFO Underflowed</description>
<bitRange>[10:10]</bitRange>
</field>
<field>
<name>RXOVERFLOW</name>
<description>TX FIFO Overflowed</description>
<bitRange>[11:11]</bitRange>
</field>
<field>
<name>TXREADY</name>
<description>TX FIFO Ready</description>
<bitRange>[12:12]</bitRange>
</field>
<field>
<name>RXREADY</name>
<description>RX FIFO Ready</description>
<bitRange>[13:13]</bitRange>
</field>
<field>
<name>TXEMPTY</name>
<description>TX FIFO Empty</description>
<bitRange>[14:14]</bitRange>
</field>
<field>
<name>RXFULL</name>
<description>RX FIFO Full</description>
<bitRange>[15:15]</bitRange>
</field>
</fields>
</register>
<register derivedFrom="S0_IRQ_ENB">
<name>S0_IRQ_RAW</name>
<description>Slave Raw Interrupt Status Register</description>
<addressOffset>0x12c</addressOffset>
<access>read-only</access>
</register>
<register derivedFrom="S0_IRQ_ENB">
<name>S0_IRQ_END</name>
<description>Slave Enabled Interrupt Status Register</description>
<addressOffset>0x130</addressOffset>
<access>read-only</access>
</register>
<register derivedFrom="S0_IRQ_ENB">
<name>S0_IRQ_CLR</name>
<description>Slave Clear Interrupt Status Register</description>
<addressOffset>0x134</addressOffset>
<access>write-only</access>
<modifiedWriteValues>oneToClear</modifiedWriteValues>
</register>
<register>
<name>S0_RXFIFOIRQTRG</name>
<description>Slave Rx FIFO IRQ Trigger Level</description>
<addressOffset>0x138</addressOffset>
</register>
<register>
<name>S0_TXFIFOIRQTRG</name>
<description>Slave Tx FIFO IRQ Trigger Level</description>
<addressOffset>0x13c</addressOffset>
</register>
<register>
<name>S0_FIFO_CLR</name>
<description>Slave Clear FIFO Register</description>
<addressOffset>0x140</addressOffset>
<access>write-only</access>
<fields>
<field>
<name>RXFIFO</name>
<description>Clear Rx FIFO</description>
<bitRange>[0:0]</bitRange>
</field>
<field>
<name>TXFIFO</name>
<description>Clear Tx FIFO</description>
<bitRange>[1:1]</bitRange>
</field>
</fields>
</register>
<register>
<name>S0_ADDRESSB</name>
<description>Slave I2C Address B Value</description>
<addressOffset>0x144</addressOffset>
</register>
<register>
<name>S0_ADDRESSMASKB</name>
<description>Slave I2C Address B Mask value</description>
<addressOffset>0x148</addressOffset>
</register>
<register>
<name>PERID</name>
<description>Peripheral ID Register</description>
<addressOffset>0xffc</addressOffset>
<access>read-only</access>
<resetValue>0x001407e1</resetValue>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="I2CA">
<name>I2CB</name>
<baseAddress>0x40061000</baseAddress>
</peripheral>
<!-- **************************************************************************************** -->
</peripherals>
</device>
Reference in New Issue Copy Permalink