Merge pull request 'fix READMEs' (#4) from fix-readmes into main

Reviewed-on: #4

va108xx-hal/README.md

@@ -14,16 +14,6 @@ various drivers in the embedded rust ecosystem.
 In contrats to other HAL implementations, there is only one chip variant available here so there
 is no need to pass the chip variant as a feature.
 
-## Supported Boards
-
- The first way to use this HAL will probably be with the
- [REB1 development board](https://www.voragotech.com/products/reb1-va108x0-development-board-0).
- The BSP provided for this board also contains instructions how to flash the board.
-
- | Crate | Version |
-|:------|:--------|
-[vorago-reb1](https://crates.io/crates/vorago-reb1) | [![Crates.io](https://img.shields.io/crates/v/vorago-reb1)](https://crates.io/crates/vorago-reb1) |
-
 ## Building
 
 Building an application requires the `thumbv6m-none-eabi` cross-compiler toolchain.
@@ -41,15 +31,6 @@ available to learn Rust:
 - [Rust Embedded Book](https://docs.rust-embedded.org/book/)
 - [Rust Discovery Book](https://docs.rust-embedded.org/discovery/)
 
-## Examples
-
-Some examples, which are not specific to a particular board were provided as well.
-You can build the timer example with
-
-```sh
-cargo build --example timer-ticks
-```
-
 ## Setting up your own binary crate
 
 If you have a custom board, you might be interested in setting up a new binary crate for your
@@ -83,5 +64,4 @@ is contained within the
 6. Build the application with `cargo build`
 
 7. Flashing the board might work differently for different boards and there is usually
-   more than one way. You can find example instructions for the REB1 development board
+   more than one way. You can find example instructions in primary README.
-   [here](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1).

va108xx/README.md

@@ -9,9 +9,7 @@ Voragos VA108xx series of Cortex-M0 based microcontrollers.
 The crate was generated using [`svd2rust`](https://github.com/rust-embedded/svd2rust).
 
 If you are interested in higher-level abstractions, it is recommended you visit
-the [`va108xx-hal` HAL crate](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal) and
+the `va108xx-hal` HAL crate and the `vorago-reb1` BSP crate which build on top of this PAC.
-the [`vorago-reb1` BSP crate](https://github.com/robamu-org/vorago-reb1-rs) which build on top of
-this PAC and provide application examples as well.
 
 ## Usage
 

vorago-reb1/README.md

@@ -7,76 +7,4 @@ This is the Rust **B**oard **S**upport **P**ackage crate for the Vorago REB1 dev
 Its aim is to provide drivers for the board features of the REB1 board
 
 The BSP builds on top of the [HAL crate for VA108xx devices](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal).
-
+The example folder contains some example applications using the on-board peripherals.
-## Building
-
-Building an application requires the `thumbv6m-none-eabi` cross-compiler toolchain.
-If you have not installed it yet, you can do so with
-
-```sh
-rustup target add thumbv6m-none-eabi
-```
-
-This repository provides some example applications to show how the BSP is used. For example
-you can build the blinky example with
-
-```sh
-cargo build --example blinky-leds
-```
-
-If you have not done this yet, it is recommended to read some of the excellent resources
-available to learn Rust:
-
-- [Rust Embedded Book](https://docs.rust-embedded.org/book/)
-- [Rust Discovery Book](https://docs.rust-embedded.org/discovery/)
-
-## Flashing from the command line
-
-A `jlink.gdb` file is provided to allow flashing of the board from the command line.
-
-
-1. Ensure that you have a suitable GDB application like `arm-none-eabi-gdb` or `gdb-multiarch`
-   installed first. On Windows, you can use [xPacks](https://xpack.github.io/arm-none-eabi-gcc/).
-   On Linux, you can install `gdb-multiarch` from the package manager.
-
-2. Install the [JLink Tools](https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack).
-
-3. Start the JLink GDB server with the GUI or from the command line. The device should be recognized
-   automatically
-
-4. Make sure to select an appropriate runner in the `.cargo/config.toml` file depending on which
-   GDB application you are using
-
-5. Use
-
-   ```sh
-   cargo run --example blinky-leds
-   ```
-
-   to flash the board. The debugger should stop at the start of the main.
-
-## Debugging with VS Code
-
-The REB1 board features an on-board JTAG, so all that is required to debug the board is a
-Micro-USB cable.
-
-You can debug applications on the REB1 board with a graphical user interface using VS Code with
-the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
-
-Some sample configuration files for VS code were provided as well. You can simply use `Run and Debug`
-to automatically rebuild and flash your application.
-
-The `tasks.json` and the `launch.json` files are generic and you can use them immediately by
-opening the folder in VS code or adding it to a workspace.
-
-If you would like to use a custom GDB application, you can specify the gdb binary in the following
-configuration variables in your `settings.json`:
-
-- `"cortex-debug.gdbPath"`
-- `"cortex-debug.gdbPath.linux"`
-- `"cortex-debug.gdbPath.windows"`
-- `"cortex-debug.gdbPath.osx"`
-
-## Flashing the non-volatile memory
-
-Coming Soon