From ca27816fcc342d9c04243a006a5a4e9eeb016626 Mon Sep 17 00:00:00 2001
From: Robin Mueller <robin.mueller.m@gmail.com>
Date: Mon, 1 Nov 2021 23:42:52 +0100
Subject: [PATCH] removed schema file, not required anymore

---
 CMSIS-SVD.xsd | 660 --------------------------------------------------
 1 file changed, 660 deletions(-)
 delete mode 100644 CMSIS-SVD.xsd

diff --git a/CMSIS-SVD.xsd b/CMSIS-SVD.xsd
deleted file mode 100644
index 2ae1d9b..0000000
--- a/CMSIS-SVD.xsd
+++ /dev/null
@@ -1,660 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-
-  Copyright (c) 2013-2019 ARM Limited. All rights reserved.
-
-  SPDX-License-Identifier: Apache-2.0
-
-  Licensed under the Apache License, Version 2.0 (the License); you may
-  not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-
-  www.apache.org/licenses/LICENSE-2.0
-
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an AS IS BASIS, WITHOUT
-  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-
-  $Date:         12. June 2021
-  $Revision:     1.3.7
-
-  Version 1.3.7:
-  - add CM55 as enumerated value for cpuNameType.
-  
-  Version 1.3.6:
-  - add ARMV81MML as enumeration value for cpuNameType.
-  
-  Version 1.3.5:
-  - add CM35P as enumeration value for cpuNameType.
-
-  Version 1.3.4:
-  - add dspPresent element to cpuType as SIMD instructions became optional for new processors.
-
-  Version 1.3.3:
-  - update file header to Apache 2.0 License
-  - add dimableIdentifierType, as a copy of previous identifierType adding "%s",
-  - update identifierType to only allow names without %s included.
-  - remove enumerationNameType.
-  - add headerEnumName to enumerationType and to dimArrayIndexType for peripheral arrays
-    overwriting hierarchically generated names
-  - add dimName to dimElementGroup. Only valid in <cluster> context, ignored otherwise.
-
-  Version 1.3.2:
-  adding dimIndexArray to peripheral-, cluster- and register-array to describe
-  enumeration of array indices.
-
-  Version 1.3.1:
-  fixed peripheral name element type to identifierType to support %s for peripheral arrays
-  added optional protection element to addressBlockType and added p=privileged
-
-  Version 1.3:
-  added dim to peripherals to describe an array of peripherals.
-  added nesting of clusters to support hierarchical register structures.
-  added protection element as part of the registerPropertiesGroup indicating
-  special permissions are required for accessing a register.
-  CPU Section extended with description of the Secure Attribution Unit.
-
-  Version 1.2:
-  Cortex-M7 support items have been added as optional tags for the device header file generation:
-  fpuDP, icachePresent, dcachePresent, itcmPresent, dtcmPresent
-
-  Version 1.1:
-  For backward compatibility all additional tags have been made optional.
-  Extensions may be mandatory for successful device header file generation
-  Other changes are related to some restructuring of the schema.
-
-  Note that the memory section has been removed since this would limit the
-  reuse of descriptions for a series of devices.
- -->
-
-<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="qualified" version="1.3">
-  <!-- stringType requires a none empty string of a least one character length -->
-  <xs:simpleType name="stringType">
-    <xs:restriction base="xs:string">
-      <xs:minLength value="1"/>
-    </xs:restriction>
-  </xs:simpleType>
-
-  <xs:simpleType name="descriptionStringType">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="[\p{IsBasicLatin}\p{IsLatin-1Supplement}]*" />
-    </xs:restriction>
-  </xs:simpleType>
-
-  <!-- cpuType specifies a selection of Cortex-M and Secure-Cores. This list will get extended as new processors are released -->
-  <xs:simpleType name="cpuNameType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="CM0"/>
-      <xs:enumeration value="CM0PLUS"/>
-      <xs:enumeration value="CM0+"/>
-      <xs:enumeration value="CM1"/>
-      <xs:enumeration value="SC000"/>
-      <xs:enumeration value="CM23"/>
-      <xs:enumeration value="CM3"/>
-      <xs:enumeration value="CM33"/>
-      <xs:enumeration value="CM35P"/>
-      <xs:enumeration value="CM55"/>
-      <xs:enumeration value="SC300"/>
-      <xs:enumeration value="CM4"/>
-      <xs:enumeration value="CM7"/>
-      <xs:enumeration value="ARMV8MML"/>
-      <xs:enumeration value="ARMV8MBL"/>
-      <xs:enumeration value="ARMV81MML"/>
-      <xs:enumeration value="CA5"/>
-      <xs:enumeration value="CA7"/>
-      <xs:enumeration value="CA8"/>
-      <xs:enumeration value="CA9"/>
-      <xs:enumeration value="CA15"/>
-      <xs:enumeration value="CA17"/>
-      <xs:enumeration value="CA53"/>
-      <xs:enumeration value="CA57"/>
-      <xs:enumeration value="CA72"/>
-      <xs:enumeration value="other"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- revisionType specifies the CPU revision format as defined by ARM (rNpM) -->
-  <xs:simpleType name="revisionType">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="r[0-9]*p[0-9]*"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- EndianType pre-defines the tokens for specifying the endianess of the device -->
-  <xs:simpleType name="endianType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="little"/>
-      <xs:enumeration value="big"/>
-      <xs:enumeration value="selectable"/>
-      <xs:enumeration value="other"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- dataType pre-defines the tokens in line with CMSIS data type definitions -->
-  <xs:simpleType name="dataTypeType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="uint8_t"/>
-      <xs:enumeration value="uint16_t"/>
-      <xs:enumeration value="uint32_t"/>
-      <xs:enumeration value="uint64_t"/>
-      <xs:enumeration value="int8_t"/>
-      <xs:enumeration value="int16_t"/>
-      <xs:enumeration value="int32_t"/>
-      <xs:enumeration value="int64_t"/>
-      <xs:enumeration value="uint8_t *"/>
-      <xs:enumeration value="uint16_t *"/>
-      <xs:enumeration value="uint32_t *"/>
-      <xs:enumeration value="uint64_t *"/>
-      <xs:enumeration value="int8_t *"/>
-      <xs:enumeration value="int16_t *"/>
-      <xs:enumeration value="int32_t *"/>
-      <xs:enumeration value="int64_t *"/>
-    </xs:restriction>
-  </xs:simpleType>
-
-  <!-- dimableIdentifierType specifies the subset and sequence of characters used for specifying identifiers that may contain %s from dim. -->
-  <!-- this is particularly important as these are used in ANSI C Structures during the device header file generation -->
-  <xs:simpleType name="dimableIdentifierType">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="((%s)|(%s)[_A-Za-z]{1}[_A-Za-z0-9]*)|([_A-Za-z]{1}[_A-Za-z0-9]*(\[%s\])?)|([_A-Za-z]{1}[_A-Za-z0-9]*(%s)?[_A-Za-z0-9]*)"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- identifierType specifies the subset and sequence of characters used for specifying identifiers that must not contain %s from dim. -->
-  <!-- this is particularly important as these are used in ANSI C Structures during the device header file generation -->
-  <xs:simpleType name="identifierType">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="[_A-Za-z0-9]*"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- V1.3: Protection Access Attribute Strings -->
-  <xs:simpleType name="protectionStringType">
-    <xs:restriction base="xs:string">
-      <!-- s = Secure                      -->
-      <!-- n = Non-secure                  -->
-      <!-- p = Privileged                  -->
-      <xs:pattern value="[snp]"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- V1.3: SAU Access Type -->
-  <xs:simpleType name="sauAccessType">
-    <xs:restriction base="xs:string">
-      <!-- c = non-secure Callable / Secure -->
-      <!-- n = Non-secure                   -->
-      <xs:pattern value="[cn]"/>
-    </xs:restriction>
-  </xs:simpleType>
-
-  <!-- dimIndexType specifies the subset and sequence of characters used for specifying the sequence of indices in register arrays -->
-  <xs:simpleType name="dimIndexType">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="[0-9]+\-[0-9]+|[A-Z]-[A-Z]|[_0-9a-zA-Z]+(,\s*[_0-9a-zA-Z]+)+"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- scaledNonNegativeInteger specifies the format in which numbers are represented in hexadecimal or decimal format -->
-  <xs:simpleType name="scaledNonNegativeInteger">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="[+]?(0x|0X|#)?[0-9a-fA-F]+[kmgtKMGT]?"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- enumeratedValueDataType specifies the number formats for the values in enumeratedValues -->
-  <xs:simpleType name="enumeratedValueDataType">
-    <xs:restriction base="xs:string">
-      <xs:pattern value="[+]?(((0x|0X)[0-9a-fA-F]+)|([0-9]+)|((#|0b)[01xX]+))"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- accessType specfies the pre-defined tokens for the available accesses -->
-  <xs:simpleType name="accessType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="read-only"/>
-      <xs:enumeration value="write-only"/>
-      <xs:enumeration value="read-write"/>
-      <xs:enumeration value="writeOnce"/>
-      <xs:enumeration value="read-writeOnce"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- modifiedWriteValuesType specifies the pre-defined tokens for the write side effects -->
-  <xs:simpleType name="modifiedWriteValuesType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="oneToClear"/>
-      <xs:enumeration value="oneToSet"/>
-      <xs:enumeration value="oneToToggle"/>
-      <xs:enumeration value="zeroToClear"/>
-      <xs:enumeration value="zeroToSet"/>
-      <xs:enumeration value="zeroToToggle"/>
-      <xs:enumeration value="clear"/>
-      <xs:enumeration value="set"/>
-      <xs:enumeration value="modify"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- readAction type specifies the pre-defined tokens for read side effects -->
-  <xs:simpleType name="readActionType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="clear"/>
-      <xs:enumeration value="set"/>
-      <xs:enumeration value="modify"/>
-      <xs:enumeration value="modifyExternal"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- enumUsageType specifies the pre-defined tokens for selecting what access types an enumeratedValues set is associated with -->
-  <xs:simpleType name="enumUsageType">
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="read"/>
-      <xs:enumeration value="write"/>
-      <xs:enumeration value="read-write"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- bitRangeType specifies the bit numbers to be restricted values from 0 - 69 -->
-  <xs:simpleType name="bitRangeType">
-    <xs:restriction base="xs:token">
-      <xs:pattern value="\[([0-4])?[0-9]:([0-4])?[0-9]\]"/>
-    </xs:restriction>
-  </xs:simpleType>
-  <!-- writeContraintType specifies how to describe the restriction of the allowed values that can be written to a resource -->
-  <xs:complexType name="writeConstraintType">
-    <xs:choice>
-      <xs:element name="writeAsRead" type="xs:boolean"/>
-      <xs:element name="useEnumeratedValues" type="xs:boolean"/>
-      <xs:element name="range">
-        <xs:complexType>
-          <xs:sequence>
-            <xs:element name="minimum" type="scaledNonNegativeInteger"/>
-            <xs:element name="maximum" type="scaledNonNegativeInteger"/>
-          </xs:sequence>
-        </xs:complexType>
-      </xs:element>
-    </xs:choice>
-  </xs:complexType>
-  <!-- addressBlockType specifies the elements to describe an address block -->
-  <xs:complexType name="addressBlockType">
-    <xs:sequence>
-      <xs:element name="offset" type="scaledNonNegativeInteger"/>
-      <xs:element name="size" type="scaledNonNegativeInteger"/>
-      <xs:element name="usage">
-        <xs:simpleType>
-          <xs:restriction base="xs:token">
-            <xs:enumeration value="registers"/>
-            <xs:enumeration value="buffer"/>
-            <xs:enumeration value="reserved"/>
-          </xs:restriction>
-        </xs:simpleType>
-      </xs:element>
-      <!-- Version 1.3.2: optional access protection for an address block s=secure n=non-secure p=privileged -->
-      <xs:element name="protection" type="protectionStringType" minOccurs="0"/>
-    </xs:sequence>
-  </xs:complexType>
-  <!-- interruptType specifies how to describe an interrupt associated with a peripheral -->
-  <xs:complexType name="interruptType">
-    <xs:sequence>
-      <xs:element name="name" type="stringType"/>
-      <xs:element name="description" type="xs:string" minOccurs="0"/>
-      <xs:element name="value" type="xs:integer"/>
-    </xs:sequence>
-  </xs:complexType>
-  <!-- register properties group specifies register size, access permission and reset value
-       this is used in multiple locations. Settings are inherited downstream. -->
-  <xs:group name="registerPropertiesGroup">
-    <xs:sequence>
-      <xs:element name="size" type="scaledNonNegativeInteger" minOccurs="0"/>
-      <xs:element name="access" type="accessType" minOccurs="0"/>
-      <!-- V 1.3: extended register access protection -->
-      <xs:element name="protection" type="protectionStringType" minOccurs="0"/>
-      <xs:element name="resetValue" type="scaledNonNegativeInteger" minOccurs="0"/>
-      <xs:element name="resetMask" type="scaledNonNegativeInteger" minOccurs="0"/>
-    </xs:sequence>
-  </xs:group>
-  <!-- bitRangeLsbMsbStyle specifies the bit position of a field within a register
-       by specifying the least significant and the most significant bit position -->
-  <xs:group name="bitRangeLsbMsbStyle">
-    <xs:sequence>
-      <xs:element name="lsb"  type="scaledNonNegativeInteger"/>
-      <xs:element name="msb"  type="scaledNonNegativeInteger"/>
-    </xs:sequence>
-  </xs:group>
-  <!-- bitRangeOffsetWidthStyle specifies the bit position of a field within a register
-       by specifying the least significant bit position and the bitWidth of the field -->
-  <xs:group name="bitRangeOffsetWidthStyle">
-    <xs:sequence>
-      <xs:element name="bitOffset" type="scaledNonNegativeInteger"/>
-      <xs:element name="bitWidth" type="scaledNonNegativeInteger" minOccurs="0"/>
-    </xs:sequence>
-  </xs:group>
-
-  <!-- dimElementGroup specifies the number of array elements (dim), the address offset
-       between to consecutive array elements and an a comma seperated list of strings
-       being used for identifying each element in the array -->
-  <xs:group name="dimElementGroup">
-    <xs:sequence>
-      <xs:element name="dim" type="scaledNonNegativeInteger"/>
-      <xs:element name="dimIncrement" type="scaledNonNegativeInteger"/>
-      <xs:element name="dimIndex" type="dimIndexType" minOccurs="0"/>
-      <xs:element name="dimName" type="identifierType" minOccurs="0"/>
-      <xs:element name="dimArrayIndex" type="dimArrayIndexType" minOccurs="0"/>
-    </xs:sequence>
-  </xs:group>
-
-  <xs:complexType name="cpuType">
-    <xs:sequence>
-      <!-- V1.1: ARM processor name: Cortex-Mx / SCxxx -->
-      <xs:element name="name" type="cpuNameType"/>
-      <!-- V1.1: ARM defined revision of the cpu -->
-      <xs:element name="revision" type="revisionType"/>
-      <!-- V1.1: Endian specifies the endianess of the processor/device -->
-      <xs:element name="endian" type="endianType"/>
-      <!-- V1.1: mpuPresent specifies whether or not a memory protection unit is physically present -->
-      <xs:element name="mpuPresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.1: fpuPresent specifies whether or not a floating point hardware unit is physically present -->
-      <xs:element name="fpuPresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.2: fpuDP specifies a double precision floating point hardware unit is physically present-->
-      <xs:element name="fpuDP" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.3: dspPresent specifies whether the optional SIMD instructions are supported by processor -->
-      <xs:element name="dspPresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.2: icachePresent specifies that an instruction cache is physically present-->
-      <xs:element name="icachePresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.2: dcachePresent specifies that a data cache is physically present-->
-      <xs:element name="dcachePresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.2: itcmPresent specifies that an instruction tightly coupled memory is physically present-->
-      <xs:element name="itcmPresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.2: dtcmPresent specifies that an data tightly coupled memory is physically present-->
-      <xs:element name="dtcmPresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.1: vtorPresent is used for Cortex-M0+ based devices only. It indicates whether the Vector -->
-      <!--       Table Offset Register is implemented in the device or not                              -->
-      <xs:element name="vtorPresent" type="xs:boolean" minOccurs="0"/>
-      <!-- V1.1: nvicPrioBits specifies the number of bits used by the Nested Vectored Interrupt Controller -->
-      <!--       for defining the priority level = # priority levels                                        -->
-      <xs:element name="nvicPrioBits" type="scaledNonNegativeInteger"/>
-      <!-- V1.1: vendorSystickConfig is set true if a custom system timer is implemented in the device -->
-      <!--       instead of the ARM specified SysTickTimer                                             -->
-      <xs:element name="vendorSystickConfig" type="xs:boolean"/>
-      <!-- V1.3: reports the total number of interrupts implemented by the device (optional) -->
-      <xs:element name="deviceNumInterrupts" type="scaledNonNegativeInteger" minOccurs="0"/>
-      <!-- V1.3: sauRegions specifies the available number of address regions -->
-      <!--       if not specified a value of zero is assumed                  -->
-      <xs:element name="sauNumRegions" type="scaledNonNegativeInteger" minOccurs="0"/>
-      <!-- V1.3: SAU Regions Configuration (if fully or partially predefined) -->
-      <xs:element name="sauRegionsConfig" minOccurs="0">
-        <xs:complexType>
-          <xs:sequence>
-            <xs:element name="region" minOccurs="0" maxOccurs="unbounded">
-              <!-- addressBlockType specifies the elements to describe an address block -->
-              <xs:complexType>
-                <xs:sequence minOccurs="1"   maxOccurs="unbounded">
-                  <xs:element name="base"    type="scaledNonNegativeInteger"/>
-                  <xs:element name="limit"   type="scaledNonNegativeInteger"/>
-                  <xs:element name="access"  type="sauAccessType"/>
-                </xs:sequence>
-                <xs:attribute name="enabled" type="xs:boolean" use="optional" default="true"/>
-                <xs:attribute name="name"    type="xs:string"  use="optional"/>
-              </xs:complexType>
-            </xs:element>
-          </xs:sequence>
-          <xs:attribute name="enabled" type="xs:boolean" use="optional" default="true"/>
-          <xs:attribute name="protectionWhenDisabled" type="protectionStringType" use="optional" default="s"/>
-        </xs:complexType>
-      </xs:element>
-     </xs:sequence>
-  </xs:complexType>
-
-  <xs:complexType name="enumeratedValueType">
-    <xs:sequence>
-      <!-- name is a ANSI C indentifier representing the value (C Enumeration) -->
-      <xs:element name="name" type="identifierType"/>
-      <!-- description contains the details about the semantics/behavior specified by this value -->
-      <xs:element name="description" type="stringType" minOccurs="0"/>
-      <xs:choice>
-        <xs:element name="value" type="enumeratedValueDataType"/>
-        <!-- isDefault specifies the name and description for all values that are not
-             specifically described individually -->
-        <xs:element name="isDefault" type="xs:boolean"/>
-      </xs:choice>
-    </xs:sequence>
-  </xs:complexType>
-
-  <xs:complexType name="enumerationType">
-    <xs:sequence>
-      <!-- name specfies a reference to this enumeratedValues section for reuse purposes
-           this name does not appear in the System Viewer nor the Header File. -->
-      <xs:element name="name" type="identifierType" minOccurs="0"/>
-      <!-- overrides the hierarchical enumeration type in the device header file. User is responsible for uniqueness across description -->
-      <xs:element name="headerEnumName" type="identifierType" minOccurs="0"/>
-      <!-- usage specifies whether this enumeration is to be used for read or write or
-                                                       (read and write) accesses -->
-      <xs:element name="usage" type="enumUsageType" minOccurs="0"/>
-      <!-- enumeratedValue derivedFrom=<identifierType> -->
-      <xs:element name="enumeratedValue" type="enumeratedValueType" minOccurs="1" maxOccurs="unbounded"/>
-    </xs:sequence>
-    <xs:attribute name="derivedFrom" type="identifierType" use="optional"/>
-  </xs:complexType>
-
-  <xs:complexType name="dimArrayIndexType">
-    <xs:sequence>
-      <xs:element name="headerEnumName" type="identifierType" minOccurs="0"/>
-      <xs:element name="enumeratedValue" type="enumeratedValueType" minOccurs="1" maxOccurs="unbounded"/>
-    </xs:sequence>
-  </xs:complexType>
-
-  <xs:complexType name="fieldType">
-    <xs:sequence>
-      <xs:group    ref="dimElementGroup" minOccurs="0"/>
-      <!-- name specifies a field's name. The System Viewer and the device header file will
-           use the name of the field as identifier -->
-      <xs:element name="name" type="dimableIdentifierType"/>
-      <!-- description contains reference manual level information about the function and
-           options of a field -->
-      <xs:element name="description" type="stringType" minOccurs="0"/>
-      <!-- alternative specifications of the bit position of the field within the register -->
-      <xs:choice minOccurs="1" maxOccurs="1">
-        <!-- bit field described by lsb followed by msb tag -->
-        <xs:group ref="bitRangeLsbMsbStyle"/>
-        <!-- bit field described by bit offset relative to Bit0 + bit width of field -->
-        <xs:group ref="bitRangeOffsetWidthStyle"/>
-        <!-- bit field described by [<msb>:<lsb>] -->
-        <xs:element name="bitRange" type="bitRangeType"/>
-      </xs:choice>
-      <!-- access describes the predefined permissions for the field. -->
-      <xs:element name="access" type="accessType" minOccurs="0"/>
-      <!-- predefined description of write side effects -->
-      <xs:element name="modifiedWriteValues" type="modifiedWriteValuesType" minOccurs="0"/>
-      <!-- writeContstraint specifies the subrange of allowed values -->
-      <xs:element name="writeConstraint" type="writeConstraintType" minOccurs="0"/>
-      <!-- readAction specifies the read side effects. -->
-      <xs:element name="readAction" type="readActionType" minOccurs="0"/>
-      <!-- enumeratedValues derivedFrom=<identifierType> -->
-      <xs:element name="enumeratedValues" type="enumerationType" minOccurs="0" maxOccurs="2">
-      </xs:element>
-    </xs:sequence>
-    <xs:attribute name="derivedFrom" type="dimableIdentifierType" use="optional"/>
-  </xs:complexType>
-
-  <xs:complexType name="fieldsType">
-    <xs:sequence>
-      <!-- field derivedFrom=<identifierType> -->
-      <xs:element name="field" type="fieldType" minOccurs="1" maxOccurs="unbounded"/>
-    </xs:sequence>
-  </xs:complexType>
-
-  <xs:complexType name="registerType">
-    <xs:sequence>
-      <xs:group    ref="dimElementGroup" minOccurs="0"/>
-      <!-- name specifies the name of the register. The register name is used by System Viewer and
-                                     device header file generator to represent a register -->
-      <xs:element name="name" type="dimableIdentifierType"/>
-      <!-- display name specifies a register name without the restritions of an ANSIS C identifier.
-                                     The use of this tag is discouraged because it does not allow consistency between
-                                     the System View and the device header file. -->
-      <xs:element name="displayName" type="stringType" minOccurs="0"/>
-      <!-- description contains a reference manual level description about the register and it's purpose -->
-      <xs:element name="description" type="stringType" minOccurs="0"/>
-      <xs:choice>
-        <!-- alternateGroup specifies the identifier of the subgroup a register belongs to.
-                                       This is useful if a register has a different description per mode but a single name -->
-        <xs:element name="alternateGroup" type="identifierType" minOccurs="0"/>
-        <!-- V1.1: alternateRegister specifies an alternate register description for an address that is
-                                       already fully described. In this case the register name must be unique within the peripheral -->
-        <xs:element name="alternateRegister" type="dimableIdentifierType" minOccurs="0"/>
-      </xs:choice>
-      <!-- addressOffset describes the address of the register relative to the baseOffset of the peripheral -->
-      <xs:element name="addressOffset" type="scaledNonNegativeInteger"/>
-      <!-- registerPropertiesGroup elements specify the default values for register size, access permission and
-                                     reset value. These default values are inherited to all fields contained in this register -->
-      <xs:group    ref="registerPropertiesGroup" minOccurs="0"/>
-      <!-- V1.1: dataType specifies a CMSIS compliant native dataType for a register (i.e. signed, unsigned, pointer) -->
-      <xs:element name="dataType" type="dataTypeType" minOccurs="0"/>
-      <!-- modifiedWriteValues specifies the write side effects -->
-      <xs:element name="modifiedWriteValues" type="modifiedWriteValuesType" minOccurs="0"/>
-      <!-- writeConstraint specifies the subset of allowed write values -->
-      <xs:element name="writeConstraint" type="writeConstraintType" minOccurs="0"/>
-      <!-- readAcction specifies the read side effects -->
-      <xs:element name="readAction" type="readActionType" minOccurs="0"/>
-      <!-- fields section contains all fields that belong to this register -->
-      <xs:element name="fields" type="fieldsType" minOccurs="0" maxOccurs="1"/>
-    </xs:sequence>
-    <xs:attribute name="derivedFrom" type="dimableIdentifierType" use="optional"/>
-  </xs:complexType>
-
-  <!-- V1.1: A cluster is a set of registers that are composed into a C data structure in the device header file -->
-  <xs:complexType name="clusterType">
-    <xs:sequence>
-      <xs:group   ref="dimElementGroup" minOccurs="0"/>
-      <xs:element name="name" type="dimableIdentifierType"/>
-      <xs:element name="description" type="xs:string"/>
-      <!-- V1.1: alternateCluster specifies an alternative description for a cluster address range that is
-                 already fully described. In this case the cluster name must be unique within the peripheral -->
-      <xs:element name="alternateCluster" type="dimableIdentifierType" minOccurs="0"/>
-      <!-- V1.1: headerStructName specifies the name for the cluster structure typedef
-                 used in the device header generation instead of the cluster name -->
-      <xs:element name="headerStructName" type="identifierType" minOccurs="0"/>
-      <xs:element name="addressOffset" type="scaledNonNegativeInteger"/>
-      <!-- registerPropertiesGroup elements specify the default values for register size, access permission and
-                 reset value. These default values are inherited to all registers contained in this peripheral -->
-      <xs:group ref="registerPropertiesGroup" minOccurs="0"/>
-      <xs:sequence>
-        <xs:choice minOccurs="1" maxOccurs="unbounded">
-          <xs:element name="register" type="registerType" minOccurs="0" maxOccurs="unbounded"/>
-          <!-- 1.3: nesting of cluster is supported -->
-          <xs:element name="cluster" type="clusterType" minOccurs="0" maxOccurs="unbounded"/>
-        </xs:choice>
-      </xs:sequence>
-    </xs:sequence>
-    <xs:attribute name="derivedFrom" type="dimableIdentifierType" use="optional"/>
-  </xs:complexType>
-
-  <!-- the registers section can have an arbitrary list of cluster and register sections -->
-  <xs:complexType name="registersType">
-    <xs:choice minOccurs="1" maxOccurs="unbounded">
-      <xs:element name="cluster" type="clusterType"/>
-      <xs:element name="register" type="registerType"/>
-    </xs:choice>
-  </xs:complexType>
-
-  <xs:complexType name="peripheralType">
-    <xs:sequence>
-      <!-- 1.3: specify uni-dimensional array of peripheral - requires name="<name>[%s]" -->
-      <xs:group    ref="dimElementGroup" minOccurs="0"/>
-      <!-- name specifies the name of a peripheral. This name is used for the System View and device header file -->
-      <xs:element name="name" type="dimableIdentifierType"/>
-      <!-- version specifies the version of the peripheral descriptions -->
-      <xs:element name="version" type="stringType" minOccurs="0"/>
-      <!-- description provides a high level functional description of the peripheral -->
-      <xs:element name="description" type="stringType" minOccurs="0"/>
-      <!-- V1.1: alternatePeripheral specifies an alternative description for an address range that is
-           already fully by a peripheral described. In this case the peripheral name must be unique within the device description -->
-      <xs:element name="alternatePeripheral" type="dimableIdentifierType" minOccurs="0"/>
-      <!-- groupName assigns this peripheral to a group of peripherals. This is only used bye the System View -->
-      <xs:element name="groupName" type="xs:Name" minOccurs="0"/>
-      <!-- prependToName specifies a prefix that is placed in front of each register name of this peripheral.
-                         The device header file will show the registers in a C-Struct of the peripheral without the prefix. -->
-      <xs:element name="prependToName" type="identifierType" minOccurs="0"/>
-      <!-- appendToName is a postfix that is appended to each register name of this peripheral. The device header
-                         file will sho the registers in a C-Struct of the peripheral without the postfix -->
-      <xs:element name="appendToName" type="identifierType" minOccurs="0"/>
-      <!-- V1.1: headerStructName specifies the name for the peripheral structure typedef
-                         used in the device header generation instead of the peripheral name -->
-      <xs:element name="headerStructName" type="dimableIdentifierType" minOccurs="0"/>
-      <!-- disableCondition contains a logical expression based on constants and register or bit-field values
-                         if the condition is evaluated to true, the peripheral display will be disabled -->
-      <xs:element name="disableCondition" type="stringType" minOccurs="0"/>
-      <!-- baseAddress specifies the absolute base address of a peripheral. For derived peripherals it is mandatory
-                         to specify a baseAddress. -->
-      <xs:element name="baseAddress" type="scaledNonNegativeInteger"/>
-      <!-- registerPropertiesGroup elements specify the default values for register size, access permission and
-                         reset value. These default values are inherited to all registers contained in this peripheral -->
-      <xs:group ref="registerPropertiesGroup" minOccurs="0"/>
-      <!-- addressBlock specifies one or more address ranges that are assigned exclusively to this peripheral.
-                         derived peripherals may have no addressBlock, however none-derived peripherals are required to specify
-                         at least one address block -->
-      <xs:element name="addressBlock" type="addressBlockType" minOccurs="0" maxOccurs="unbounded"/>
-      <!-- interrupt specifies can specify one or more interrtupts by name, description and value -->
-      <xs:element name="interrupt" type="interruptType" minOccurs="0" maxOccurs="unbounded"/>
-      <!-- registers section contains all registers owned by the peripheral. In case a peripheral gets derived it does
-                        not have its own registers section, hence this section is optional. A unique peripheral without a
-                        registers section is not allowed -->
-      <xs:element name="registers" type="registersType" minOccurs="0" maxOccurs="1">
-      </xs:element>
-    </xs:sequence>
-    <xs:attribute name="derivedFrom" type="dimableIdentifierType" use="optional"/>
-  </xs:complexType>
-
-  <!-- ==================================================== -->
-  <!-- The top level element of a description is the device -->
-  <!-- ==================================================== -->
-  <xs:element name="device" nillable="true">
-    <xs:complexType>
-      <xs:sequence>
-        <!-- V1.1: Vendor Name -->
-        <xs:element name="vendor" type="stringType" minOccurs="0"/>
-        <!-- V1.1: Vendor ID - a short name for referring to the vendor (e.g. Texas Instruments = TI) -->
-        <xs:element name="vendorID" type="identifierType" minOccurs="0"/>
-        <!-- name specifies the device name being described -->
-        <xs:element name="name" type="identifierType"/>
-        <!-- V1.1: series specifies the device series or family name -->
-        <xs:element name="series" type="stringType" minOccurs="0"/>
-        <!-- version specifies the version of the device description -->
-        <xs:element name="version" type="stringType"/>
-        <!-- description is a string describing the device features (e.g. memory size, peripherals, etc.) -->
-        <xs:element name="description" type="stringType"/>
-        <!-- V1.1: licenseText specifies the file header section to be included in any derived file -->
-        <xs:element name="licenseText" type="stringType" minOccurs="0"/>
-        <!-- V1.1: cpu specifies the details of the processor included in the device -->
-        <xs:element name="cpu" type="cpuType" minOccurs="0"/>
-        <!-- V1.1: the tag specifies the filename without extension of the CMSIS System Device include file.
-             This tag is used by the header file generator for customizing the include statement referencing the
-             CMSIS system file within the CMSIS device header file. By default the filename is "system_<device.name>"
-             In cases a device series shares a single system header file, the name of the series shall be used
-             instead of the individual device name. -->
-        <xs:element name="headerSystemFilename" type="identifierType" minOccurs="0"/>
-        <!-- V1.1: headerDefinitionPrefix specifies the string being prepended to all names of types defined in
-             generated device header file -->
-        <xs:element name="headerDefinitionsPrefix" type="identifierType" minOccurs="0"/>
-        <!-- addressUnitBits specifies the size of the minimal addressable unit in bits -->
-        <xs:element name="addressUnitBits" type="scaledNonNegativeInteger"/>
-        <!-- width specifies the number of bits for the maximum single transfer size allowed by the bus interface.
-             This sets the maximum size of a single register that can be defined for an address space -->
-        <xs:element name="width" type="scaledNonNegativeInteger"/>
-        <!-- registerPropertiesGroup elements specify the default values for register size, access permission and
-             reset value -->
-        <xs:group ref="registerPropertiesGroup" minOccurs="0"/>
-
-        <!-- peripherals is containing all peripherals -->
-        <xs:element name="peripherals">
-          <xs:complexType>
-            <xs:sequence>
-              <xs:element name="peripheral" type="peripheralType" minOccurs="1" maxOccurs="unbounded"/>
-            </xs:sequence>
-          </xs:complexType>
-        </xs:element>
-
-        <!-- Vendor Extensions: this section captures custom extensions. This section will be ignored by default -->
-        <xs:element name="vendorExtensions" minOccurs="0" maxOccurs="1">
-          <xs:complexType>
-            <xs:sequence>
-              <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded">
-              </xs:any>
-            </xs:sequence>
-          </xs:complexType>
-        </xs:element>
-      </xs:sequence>
-      <xs:attribute name="schemaVersion" type="xs:decimal" use="required"/>
-    </xs:complexType>
-  </xs:element>
-</xs:schema>
-
-<!-- END OF FILE -->
\ No newline at end of file