va416xx-rs/va416xx/svd/va416xx.svd.patched

<?xml version="1.0" encoding="UTF-8"?>
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd">
  <vendor>VORAGO TECHNOLOGIES</vendor>
  <vendorID>SST</vendorID>
  <name>va416xx</name>
  <series>M4</series>
  <version>1.3</version>
  <description>ARM 32-bit Cortex-M4 Microcontroller based device, CPU clock up to 100MHz</description>
  <licenseText>VORAGO Technologies \n
\n
----------------------------------------------------------------------------\n
 Copyright (c) 2013-2020 VORAGO Technologies\n
\n
 BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND BY ALL THE TERMS\n
 AND CONDITIONS OF THE VORAGO TECHNOLOGIES END USER LICENSE AGREEMENT. \n
\n
 THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED\n
 OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF\n
 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.\n
 VORAGO TECHNOLOGIES SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE\n
 FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.\n</licenseText>
  <cpu>
    <name>CM4</name>
    <revision>r0p1</revision>
    <endian>little</endian>
    <mpuPresent>false</mpuPresent>
    <fpuPresent>true</fpuPresent>
    <nvicPrioBits>4</nvicPrioBits>
    <vendorSystickConfig>false</vendorSystickConfig>
  </cpu>
  <headerSystemFilename>system_va416xx</headerSystemFilename>
  <headerDefinitionsPrefix>VOR_</headerDefinitionsPrefix>
  <addressUnitBits>8</addressUnitBits>
  <width>32</width>
  <size>0x20</size>
  <access>read-write</access>
  <resetValue>0x00000000</resetValue>
  <resetMask>0xFFFFFFFF</resetMask>
  <peripherals>
    <peripheral>
      <name>CLKGEN</name>
      <version>1.0</version>
      <description>Clock Generation Peripheral</description>
      <baseAddress>0x40006000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x100</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>LoCLK</name>
        <value>45</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL0</name>
          <description>Clock Generation Module Control Register 0</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000030</resetValue>
          <fields>
            <field>
              <name>SYS_CLK_LOST_DET_EN</name>
              <description>Enable the circuit that detects loss of SYS_CLK</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>PLL_RESET</name>
              <description>Writing this bit to 1 puts the PLL into reset</description>
              <bitRange>[30:30]</bitRange>
            </field>
            <field>
              <name>CLK_DIV_SEL</name>
              <description>Selects the PLL out divider to divide by 1/2/4/8</description>
              <bitRange>[29:28]</bitRange>
            </field>
            <field>
              <name>PLL_CLKR</name>
              <description>PLL Symbol; selects the values 1-16 for the reference divider</description>
              <bitRange>[27:24]</bitRange>
            </field>
            <field>
              <name>PLL_CLKF</name>
              <description>PLL Symbol; selects the values 1-64 for the multiplication factor</description>
              <bitRange>[23:18]</bitRange>
            </field>
            <field>
              <name>PLL_CLKOD</name>
              <description>PLL Symbol; selects the values 1-16 for the post VCO divider</description>
              <bitRange>[17:14]</bitRange>
            </field>
            <field>
              <name>PLL_BWADJ</name>
              <description>PLL Symbol; selects the values 1-64 for the bandwidth divider</description>
              <bitRange>[13:8]</bitRange>
            </field>
            <field>
              <name>PLL_TEST</name>
              <description>PLL Symbol;  Reference-to-counters-to-output bypass when high</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>PLL_BYPASS</name>
              <description>PLL Symbol; reference-to-output bypass when high</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>PLL_PWDN</name>
              <description>PLL Symbol; power down when high</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>PLL_INTFB</name>
              <description>PLL Symbol; select internal feedback path when high rather than FCLK</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>CLKSEL_SYS</name>
              <description>Input clock select to PLL</description>
              <bitRange>[3:2]</bitRange>
            </field>
            <field>
              <name>REF_CLK_SEL</name>
              <description>PLL Reference Clock Select</description>
              <bitRange>[1:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>STAT</name>
          <description>Clock Generation Module Status Register</description>
          <addressOffset>0x4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYSCLKLOST</name>
              <description>Set when SYS_CLK has dropped to less than 1MHz</description>
              <bitRange>[3:3]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKLOST</name>
              <description>LOCK high Symbol indicates that RFLSIP or FBSLIP have occurred for 64 consecutive cycles</description>
              <bitRange>[2:2]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>RFSLIP</name>
              <description>Reference cycle slip output (CLKOUT frequency high)</description>
              <bitRange>[1:1]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>FBSLIP</name>
              <description>Feedback cycle slip output (CLKOUT frequency low)</description>
              <bitRange>[0:0]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL1</name>
          <description>Clock Generation Module Control Register 1</description>
          <addressOffset>0x8</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADC_CLK_DIV_SEL</name>
              <description>Clock divider select for ADC</description>
              <bitRange>[6:5]</bitRange>
            </field>
            <field>
              <name>XTAL_N_EN</name>
              <description>Enables XTAL_N output</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>XTAL_EN</name>
              <description>Enables the crystal oscillator</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>PLL_LOST_LOCK_DET_EN</name>
              <description>Enables the PLL lock lost detection circuit</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>PLL_LCK_DET_REARM</name>
              <description>Resets/Rearms the PLL lock detect circuit</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>SYS_CLK_LOST_DET_REARM</name>
              <description>Resets/Rearms the SYS_CLK lost detection feature</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SYSCONFIG</name>
      <version>1.0</version>
      <description>System Configuration Peripheral</description>
      <baseAddress>0x40010000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>LVD</name>
        <value>46</value>
      </interrupt>
      <interrupt>
        <name>EDAC_MBE</name>
        <value>76</value>
      </interrupt>
      <interrupt>
        <name>EDAC_SBE</name>
        <value>77</value>
      </interrupt>
      <registers>
        <register>
          <name>RST_STAT</name>
          <description>System Reset Status</description>
          <addressOffset>0x0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>POR</name>
              <description>Power On Reset Status</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>EXTRST</name>
              <description>External Reset Status</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>SYSRSTREQ</name>
              <description>SYSRESETREQ Reset Status</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>LOOKUP</name>
              <description>LOOKUP Reset Status</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>WATCHDOG</name>
              <description>WATCHDOG Reset Status</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>MEMERR</name>
              <description>Memory Error Reset Status</description>
              <bitRange>[5:5]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register derivedFrom="RST_STAT">
          <name>RST_CNTL_ROM</name>
          <description>ROM Reset Control</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x0000003F</resetValue>
        </register>
        <register derivedFrom="RST_STAT">
          <name>RST_CNTL_RAM0</name>
          <description>RAM Reset Control</description>
          <addressOffset>0x8</addressOffset>
          <resetValue>0x0000003F</resetValue>
        </register>
        <register derivedFrom="RST_STAT">
          <name>RST_CNTL_RAM1</name>
          <description>RAM Reset Control</description>
          <addressOffset>0xC</addressOffset>
          <resetValue>0x0000003F</resetValue>
        </register>
        <register>
          <name>ROM_PROT</name>
          <description>ROM Protection Configuration</description>
          <addressOffset>0x10</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WREN</name>
              <description>ROM Write Enable Bit</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ROM_SCRUB</name>
          <description>ROM Scrub Period Configuration</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VALUE</name>
              <description>Counter divide value</description>
              <bitRange>[23:0]</bitRange>
            </field>
            <field>
              <name>RESET</name>
              <description>Reset Counter</description>
              <bitRange>[31:31]</bitRange>
              <access>write-only</access>
              <modifiedWriteValues>oneToClear</modifiedWriteValues>
            </field>
          </fields>
        </register>
        <register derivedFrom="ROM_SCRUB">
          <name>RAM0_SCRUB</name>
          <description>RAM0 Scrub Period Configuration</description>
          <addressOffset>0x18</addressOffset>
        </register>
        <register derivedFrom="ROM_SCRUB">
          <name>RAM1_SCRUB</name>
          <description>RAM1 Scrub Period Configuration</description>
          <addressOffset>0x1C</addressOffset>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>Enable EDAC Error Interrupt Register</description>
          <addressOffset>0x20</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ROMMBE</name>
              <description>ROM Multi Bit Interrupt</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>ROMSBE</name>
              <description>ROM Single Bit Interrupt</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>RAM0MBE</name>
              <description>RAM0 Multi Bit Interrupt</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>RAM0SBE</name>
              <description>RAM0 Single Bit Interrupt</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RAM1MBE</name>
              <description>RAM1 Multi Bit Interrupt</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RAM1SBE</name>
              <description>RAM1 Single Bit Interrupt</description>
              <bitRange>[5:5]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_RAW</name>
          <description>Raw EDAC Error Interrupt Status</description>
          <addressOffset>0x24</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_END</name>
          <description>Enabled EDAC Error Interrupt Status</description>
          <addressOffset>0x28</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_CLR</name>
          <description>Clear EDAC Error Interrupt Status</description>
          <addressOffset>0x2C</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
        </register>
        <register>
          <name>RAM0_SBE</name>
          <description>Count of RAM0 EDAC Single Bit Errors</description>
          <addressOffset>0x30</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>RAM0 EDAC Single Bit Errors</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="RAM0_SBE">
          <name>RAM1_SBE</name>
          <description>Count of RAM1 EDAC Single Bit Errors</description>
          <addressOffset>0x34</addressOffset>
        </register>
        <register>
          <name>RAM0_MBE</name>
          <description>Count of RAM0 EDAC Multi Bit Errors</description>
          <addressOffset>0x38</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>RAM0 Multi Bit Errors</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="RAM0_MBE">
          <name>RAM1_MBE</name>
          <description>Count of RAM1 EDAC Multi Bit Errors</description>
          <addressOffset>0x3C</addressOffset>
        </register>
        <register derivedFrom="RAM0_SBE">
          <name>ROM_SBE</name>
          <description>Count of ROM EDAC Single Bit Errors</description>
          <addressOffset>0x40</addressOffset>
        </register>
        <register derivedFrom="RAM0_MBE">
          <name>ROM_MBE</name>
          <description>Count of ROM EDAC Multi Bit Errors</description>
          <addressOffset>0x44</addressOffset>
        </register>
        <register>
          <name>ROM_RETRIES</name>
          <description>ROM BOOT Retry count</description>
          <addressOffset>0x48</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Count of ROM block Retries</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>REFRESH_CONFIG_H</name>
          <description>Register Refresh Rate for TMR registers</description>
          <addressOffset>0x4C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIVCOUNT</name>
              <description>Upper 8-bits of the Refresh Rate Counter. Registers are refreshed every DIVCOUNT+1 cycles</description>
              <bitRange>[7:0]</bitRange>
            </field>
            <field>
              <name>TESTMODE</name>
              <description>Special Test Mode Configuration. 00/01=normal. 10=Force refresh off. 11=Force refresh on constantly.</description>
              <bitRange>[31:30]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TIM_RESET</name>
          <description>TIM Reset Control</description>
          <addressOffset>0x50</addressOffset>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>TIM_RESET</name>
              <description>Reset of a given TIMER</description>
              <bitRange>[23:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TIM_CLK_ENABLE</name>
          <description>TIM Enable Control</description>
          <addressOffset>0x54</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMERS</name>
              <description>Clock enable of a given TIMER</description>
              <bitRange>[23:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERIPHERAL_RESET</name>
          <description>Peripheral Reset Control</description>
          <addressOffset>0x58</addressOffset>
          <resetValue>0x7F7BEFFF</resetValue>
          <fields>
            <field>
              <name>SPI0</name>
              <description>Resetn of SPI0</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>SPI1</name>
              <description>Resetn of SPI1</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>SPI2</name>
              <description>Resetn of SPI2</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>SPI3</name>
              <description>Resetn of SPI3</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>UART0</name>
              <description>Resetn of UART0</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>UART1</name>
              <description>Resetn of UART1</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>UART2</name>
              <description>Resetn of UART2</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>I2C0</name>
              <description>Resetn of I2C0</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>I2C1</name>
              <description>Resetn of I2C1</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>I2C2</name>
              <description>Resetn of I2C2</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>CAN0</name>
              <description>Resetn of CAN0</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>CAN1</name>
              <description>Resetn of CAN1</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TRNG</name>
              <description>Resetn of TRNG</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>ADC</name>
              <description>Resetn of ADC</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>DAC</name>
              <description>Resetn of DAC</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>DMA</name>
              <description>Resetn of DMA</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>EBI</name>
              <description>Resetn of EBI</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>ETH</name>
              <description>Resetn of Ethernet</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>SPW</name>
              <description>Resetn of SpaceWire</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>CLKGEN</name>
              <description>RESETn of PLL in Clock Generation Module</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>IRQ</name>
              <description>Resetn of IRQ Router</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>IOCONFIG</name>
              <description>Resetn of IO CONFIG</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>UTILITY</name>
              <description>Resetn of UTILITY peripheral</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>WDOG</name>
              <description>Resetn of WDOG</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>PORTA</name>
              <description>Resetn of PORTA</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>PORTB</name>
              <description>Resetn of PORTB</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>PORTC</name>
              <description>Resetn of PORTC</description>
              <bitRange>[26:26]</bitRange>
            </field>
            <field>
              <name>PORTD</name>
              <description>Resetn of PORTD</description>
              <bitRange>[27:27]</bitRange>
            </field>
            <field>
              <name>PORTE</name>
              <description>Resetn of PORTE</description>
              <bitRange>[28:28]</bitRange>
            </field>
            <field>
              <name>PORTF</name>
              <description>Resetn of PORTF</description>
              <bitRange>[29:29]</bitRange>
            </field>
            <field>
              <name>PORTG</name>
              <description>Resetn of PORTG</description>
              <bitRange>[30:30]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="PERIPHERAL_RESET">
          <name>PERIPHERAL_CLK_ENABLE</name>
          <description>Peripheral Enable Control</description>
          <addressOffset>0x5C</addressOffset>
          <resetValue>0x00880000</resetValue>
        </register>
        <register>
          <name>SPW_M4_CTRL</name>
          <description>SPW M4 control register</description>
          <addressOffset>0x60</addressOffset>
          <resetValue>0x00030000</resetValue>
          <fields>
            <field>
              <name>LREN</name>
              <description>Lockup reset enable</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>SPW_PAD_EN</name>
              <description>SPW pad enable</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>REG_WR_KEY</name>
              <description>Fuse-analog register writes enabled when key = 0xfeed</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PMU_CTRL</name>
          <description>PMU Control Register</description>
          <addressOffset>0x64</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LVL_SLCT</name>
              <description>Select the POK detect level</description>
              <bitRange>[1:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WAKEUP_CNT</name>
          <description>Wakeup Control</description>
          <addressOffset>0x68</addressOffset>
          <resetValue>0x00000007</resetValue>
          <fields>
            <field>
              <name>CNTSTRT</name>
              <description>Launch SLP mode in analog block</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>WKUP_CNT</name>
              <description>Used to set a time to wake up the processor after the device has been put in a low power state</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>EBI_CFG0</name>
          <description>EBI Config Register 0</description>
          <addressOffset>0x6C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDRLOW0</name>
              <description>Lower bound address for CEN0</description>
              <bitRange>[7:0]</bitRange>
            </field>
            <field>
              <name>ADDRHIGH0</name>
              <description>Upper bound address for CEN0</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>CFGREADCYCLE</name>
              <description>Number of cycles for a read - N plus 1</description>
              <bitRange>[18:16]</bitRange>
            </field>
            <field>
              <name>CFGWRITECYCLE</name>
              <description>Number of cycles for a write - N plus 1</description>
              <bitRange>[21:19]</bitRange>
            </field>
            <field>
              <name>CFGTURNAROUNDCYCLE</name>
              <description>Number of cycles for turnaround - N plus 1</description>
              <bitRange>[24:22]</bitRange>
            </field>
            <field>
              <name>CFGSIZE</name>
              <description>8 bit (0) or 16 bit (1) port size</description>
              <bitRange>[25:25]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="EBI_CFG0">
          <name>EBI_CFG1</name>
          <description>EBI Config Register 1</description>
          <addressOffset>0x70</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="EBI_CFG0">
          <name>EBI_CFG2</name>
          <description>EBI Config Register 2</description>
          <addressOffset>0x74</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="EBI_CFG0">
          <name>EBI_CFG3</name>
          <description>EBI Config Register 3</description>
          <addressOffset>0x78</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>ANALOG_CNTL</name>
          <description>Analog Control Register</description>
          <addressOffset>0x7C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TMOSC</name>
              <description>Test Mode</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TMPOKDIS</name>
              <description>Test Mode</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TM_ADCMUX_N</name>
              <description>Test Mode</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TM_ADCMUX_P</name>
              <description>Test Mode</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TMRATIO</name>
              <description>Test Mode</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>TMATOMUX</name>
              <description>Test Mode</description>
              <bitRange>[6:5]</bitRange>
            </field>
            <field>
              <name>ADC_STEST</name>
              <description>Number of clocks for sample time</description>
              <bitRange>[12:9]</bitRange>
            </field>
            <field>
              <name>RCLK_POS_EN</name>
              <description>Enable normal test clock</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>RCLK_NEG_EN</name>
              <description>Enable inverted test clock</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>APB2CLK_POS_EN</name>
              <description>Enable normal APB2CLK for test output</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>APB2CLK_NEG_EN</name>
              <description>Enable inverted APB2CLK for test output</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>TM_ANALOG_PD_EN</name>
              <description>Enables pull down on analog pads</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>JMP2BOOT</name>
              <description>Enables a skip of all delay counters and eFuse read</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>SKIPBOOT</name>
              <description>Enables a skip of all delay counters, eFuse read, and boot</description>
              <bitRange>[20:20]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SW_CLKDIV10</name>
          <description>Initial SpW Clock Divider Value</description>
          <addressOffset>0x80</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000009</resetValue>
          <fields>
            <field>
              <name>SW_CLKDIV10</name>
              <description>Defines the initial value for the SpW clock, defaults to divide by ten</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>REFRESH_CONFIG_L</name>
          <description>Register Refresh Rate for TMR registers</description>
          <addressOffset>0x84</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000000F</resetValue>
          <fields>
            <field>
              <name>DIVCOUNT</name>
              <description>Lower 32-bits of the Refresh Rate Counter. Registers are refreshed every DIVCOUNT+1 cycles</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DAC0_CAL</name>
          <description>DAC0 Calibration Register</description>
          <addressOffset>0xFD0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DAC0_CAL</name>
              <description>DAC0 Calibration bits</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DAC1_CAL</name>
          <description>DAC1 Calibration Register</description>
          <addressOffset>0xFD4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DAC1_CAL</name>
              <description>DAC1 Calibration bits</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ADC_CAL</name>
          <description>ADC Calibration Register</description>
          <addressOffset>0xFD8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADC_CAL</name>
              <description>ADC Calibration bits</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>BG_CAL</name>
          <description>Bandgap Calibration Register</description>
          <addressOffset>0xFDC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BG_CAL</name>
              <description>Bandgap Calibration bits</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DREG_CAL</name>
          <description>Digital LDO Regulator Calibration Register</description>
          <addressOffset>0xFE0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DREG_CAL</name>
              <description>Digital LDO Regulator Calibration bits</description>
              <bitRange>[8:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>AREG_CAL</name>
          <description>Analog LDO Regulator Calibration Register</description>
          <addressOffset>0xFE4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>AREG_CAL</name>
              <description>Analog LDO Regulator Calibration bits</description>
              <bitRange>[8:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>HBO_CAL</name>
          <description>Heart Beat OSC Calibration Register</description>
          <addressOffset>0xFE8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OSC_CAL</name>
              <description>1MHz OSC Calibration bit</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>HBO_CAL</name>
              <description>Heart Beat OSC Calibration bits</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>EF_CONFIG</name>
          <description>EFuse Config Register</description>
          <addressOffset>0xFEC</addressOffset>
          <access>read-only</access>
          <resetValue>0x0A800C40</resetValue>
          <fields>
            <field>
              <name>ROM_SPEED</name>
              <description>Specifies the speed of ROM_SCK</description>
              <bitRange>[1:0]</bitRange>
            </field>
            <field>
              <name>ROM_SIZE</name>
              <description>Specifies how much of the full 128K byte address space is loaded from the external SPI memory after a reset</description>
              <bitRange>[5:2]</bitRange>
            </field>
            <field>
              <name>ROM_NOCHECK</name>
              <description>When set to 1, the ROM check is skipped</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>BOOT_DELAY</name>
              <description>Specifies the boot delay from the end of the Power-On-Sequence to the release of Reset</description>
              <bitRange>[9:7]</bitRange>
            </field>
            <field>
              <name>ROM_READ</name>
              <description>SPI ROM read instruction code</description>
              <bitRange>[17:10]</bitRange>
            </field>
            <field>
              <name>ROM_LATENCY</name>
              <description>Number of bits of latency from Address until data from the SPI ROM</description>
              <bitRange>[22:18]</bitRange>
            </field>
            <field>
              <name>ROM_ADDRESS</name>
              <description>ROM Address Mode</description>
              <bitRange>[24:23]</bitRange>
            </field>
            <field>
              <name>ROM_DLYCAP</name>
              <description>ROM SPI Delayed capture</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>ROM_STATUS</name>
              <description>The first data byte from the SPI ROM following an address is taken as a status byte</description>
              <bitRange>[26:26]</bitRange>
            </field>
            <field>
              <name>RM</name>
              <description>This bit controls the internal RAM read timing and must be maintained at this value</description>
              <bitRange>[27:27]</bitRange>
            </field>
            <field>
              <name>WM</name>
              <description>This bit controls the internal RAM write timing and must be maintained at this value</description>
              <bitRange>[28:28]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>EF_ID0</name>
          <description>EFuse ID0 Register</description>
          <addressOffset>0xFF0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>EF_ID1</name>
          <description>EFuse ID1 Register</description>
          <addressOffset>0xFF4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>PROCID</name>
          <description>Processor ID Register</description>
          <addressOffset>0xFF8</addressOffset>
          <access>read-only</access>
          <resetValue>0x040057E3</resetValue>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x028007E9</resetValue>
          <fields>
            <field>
              <name>MANUFACTURER_ID</name>
              <description>MANUFACTURER_ID</description>
              <bitRange>[11:0]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>PERIPHERAL_ID</name>
              <description>PERIPHERAL_ID</description>
              <bitRange>[23:16]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>PERIPHERAL_VER</name>
              <description>PERIPHERAL_VER</description>
              <bitRange>[31:24]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DMA</name>
      <version>1.0</version>
      <description>DMA Controller Block</description>
      <baseAddress>0x40001000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>DMA_ERROR</name>
        <value>43</value>
      </interrupt>
      <interrupt>
        <name>DMA_ACTIVE0</name>
        <value>174</value>
      </interrupt>
      <interrupt>
        <name>DMA_ACTIVE1</name>
        <value>175</value>
      </interrupt>
      <interrupt>
        <name>DMA_ACTIVE2</name>
        <value>176</value>
      </interrupt>
      <interrupt>
        <name>DMA_ACTIVE3</name>
        <value>177</value>
      </interrupt>
      <interrupt>
        <name>DMA_DONE0</name>
        <value>178</value>
      </interrupt>
      <interrupt>
        <name>DMA_DONE1</name>
        <value>179</value>
      </interrupt>
      <interrupt>
        <name>DMA_DONE2</name>
        <value>180</value>
      </interrupt>
      <interrupt>
        <name>DMA_DONE3</name>
        <value>181</value>
      </interrupt>
      <registers>
        <register>
          <name>STATUS</name>
          <description>DMA Status</description>
          <addressOffset>0x0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TEST_STATUS</name>
              <description>Test Status Logic Included</description>
              <bitRange>[31:28]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CHNLS_MINUS1</name>
              <description>Number of Available Channels Minus 1</description>
              <bitRange>[20:16]</bitRange>
            </field>
            <field>
              <name>STATE</name>
              <description>Current State of the control state machine</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>MASTER_ENABLE</name>
              <description>Enable status of the controller</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG</name>
          <description>DMA Configuration</description>
          <addressOffset>0x4</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHNL_PROT_CTRL</name>
              <description>HPROT[3:0]</description>
              <bitRange>[7:5]</bitRange>
            </field>
            <field>
              <name>MASTER_ENABLE</name>
              <description>PLL Symbol; Feedback cycle slip output (CLKOUT frequency low)</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL_BASE_PTR</name>
          <description>Base Pointer for DMA Control Registers</description>
          <addressOffset>0x8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CTRL_BASE_PTR</name>
              <description>Base Pointer for DMA Control Registers</description>
              <bitRange>[31:7]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ALT_CTRL_BASE_PTR</name>
          <description>DMA Channel alternate control data base pointer</description>
          <addressOffset>0xC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ALT_CTRL_BASE_PTR</name>
              <description>Base Pointer for Alternate DMA Control Register</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WAITONREQ_STATUS</name>
          <description>DMA channel wait on request status</description>
          <addressOffset>0x10</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA wait on request</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA wait on request</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA wait on request</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA wait on request</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_SW_REQUEST</name>
          <description>DMA channel software request</description>
          <addressOffset>0x14</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel SW request</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel SW request</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel SW request</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel SW request</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_USEBURST_SET</name>
          <description>DMA channel useburst set</description>
          <addressOffset>0x18</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel use burst set</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel use burst set</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel use burst set</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel use burst set</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_USEBURST_CLR</name>
          <description>DMA channel useburst clear</description>
          <addressOffset>0x1C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel use burst clear</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel use burst clear</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel use burst clear</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel use burst clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_REQ_MASK_SET</name>
          <description>DMA channel request mask set</description>
          <addressOffset>0x20</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel Request Mask set</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel Request Mask set</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel Request Mask set</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel Request Mask set</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_REQ_MASK_CLR</name>
          <description>DMA channel request mask clear</description>
          <addressOffset>0x24</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel Request Mask clear</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel Request Mask clear</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel Request Mask clear</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel Request Mask clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_ENABLE_SET</name>
          <description>DMA channel enable set</description>
          <addressOffset>0x28</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel Enable set</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel Enable set</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel Enable set</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel Enable set</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_ENABLE_CLR</name>
          <description>DMA channel enable clear</description>
          <addressOffset>0x2C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel Enable clear</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel Enable clear</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel Enable clear</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel Enable clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_PRI_ALT_SET</name>
          <description>DMA channel primary alternate set</description>
          <addressOffset>0x30</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel PRI_ALT set</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel PRI_ALT set</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel PRI_ALT set</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel PRI_ALT set</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_PRI_ALT_CLR</name>
          <description>DMA channel primary alternate clear</description>
          <addressOffset>0x34</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel PRI_ALT clear</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel PRI_ALT clear</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel PRI_ALT clear</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel PRI_ALT clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_PRIORITY_SET</name>
          <description>DMA channel priority set</description>
          <addressOffset>0x38</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel PRIORITY set</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel PRIORITY set</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel PRIORITY set</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel PRIORITY set</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHNL_PRIORITY_CLR</name>
          <description>DMA channel priority clear</description>
          <addressOffset>0x3C</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>Channel PRIORITY clear</description>
              <bitRange>[3:3]</bitRange>
              <access>write-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel PRIORITY clear</description>
              <bitRange>[2:2]</bitRange>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel PRIORITY clear</description>
              <bitRange>[1:1]</bitRange>
              <access>write-only</access>
            </field>
            <field>
              <name>CH0</name>
              <description>Channel PRIORITY clear</description>
              <bitRange>[0:0]</bitRange>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ERR_CLR</name>
          <description>DMA bus error clear</description>
          <addressOffset>0x4C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ERR_CLR</name>
              <description>Error Clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEGRATION_CFG</name>
          <description>DMA integration configuration</description>
          <addressOffset>0xE00</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>INT_TEST_EN</name>
              <description>Error Clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>STALL_STATUS</name>
          <description>DMA stall status</description>
          <addressOffset>0xE08</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>STALL_STATUS</name>
              <description>DMA is stalled</description>
              <bitRange>[0:0]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_REQ_STATUS</name>
          <description>DMA Configuration</description>
          <addressOffset>0xE10</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA Request Status for this CH</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA Request Status for this CH</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA Request Status for this CH</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA Request Status for this CH</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_SREQ_STATUS</name>
          <description>DMA single request status</description>
          <addressOffset>0xE18</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA SRequest Status for this CH</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA SRequest Status for this CH</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA SRequest Status for this CH</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA SRequest Status for this CH</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_DONE_SET</name>
          <description>DMA done set</description>
          <addressOffset>0xE20</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA Done Set for this CH</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA Done Set for this CH</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA Done Set for this CH</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA Done Set for this CH</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_DONE_CLR</name>
          <description>DMA done clear</description>
          <addressOffset>0xE24</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA Done clear for this CH</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA Done clear for this CH</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA Done clear for this CH</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA Done clear for this CH</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_ACTIVE_SET</name>
          <description>DMA active set</description>
          <addressOffset>0xE28</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA Active Set</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA Active Set</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA Active Set</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA Active Set</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_ACTIVE_CLR</name>
          <description>DMA active clear</description>
          <addressOffset>0xE2C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH3</name>
              <description>DMA Active clear</description>
              <bitRange>[3:3]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH2</name>
              <description>DMA Active clear</description>
              <bitRange>[2:2]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH1</name>
              <description>DMA Active clear</description>
              <bitRange>[1:1]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>CH0</name>
              <description>DMA Active clear</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ERR_SET</name>
          <description>DMA bus error set</description>
          <addressOffset>0xE48</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ERR_SET</name>
              <description>Set Error</description>
              <bitRange>[0:0]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PERIPH_ID_4</name>
          <description>DMA Peripheral ID 4</description>
          <addressOffset>0xFD0</addressOffset>
          <resetValue>0x00000004</resetValue>
          <fields>
            <field>
              <name>BLOCK_COUNT</name>
              <description>The Number of 4k Address Blocks Required</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>JEP106_C_CODE</name>
              <description>JEP106</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERIPH_ID_0</name>
          <description>DMA Peripheral ID 0</description>
          <addressOffset>0xFE0</addressOffset>
          <resetValue>0x00000030</resetValue>
          <fields>
            <field>
              <name>PART_NUMBER_0</name>
              <description>Part Number</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERIPH_ID_1</name>
          <description>DMA Peripheral ID 1</description>
          <addressOffset>0xFE4</addressOffset>
          <access>read-only</access>
          <resetValue>0x000000B2</resetValue>
          <fields>
            <field>
              <name>JEP106_ID_3_0</name>
              <description>Indentity Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>PART_NUMBER_1</name>
              <description>Part Number 1</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERIPH_ID_2</name>
          <description>DMA Peripheral ID 2</description>
          <addressOffset>0xFE8</addressOffset>
          <resetValue>0x000000BC</resetValue>
          <fields>
            <field>
              <name>REVISION</name>
              <description>Revision</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>JEDEC_USED</name>
              <description>JEDEC</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>JEP106_ID_6_4</name>
              <description>JEP106</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERIPH_ID_3</name>
          <description>DMA Peripheral ID 3</description>
          <addressOffset>0xFEC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MOD_NUMBER</name>
              <description>Controller Modifications</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PRIMECELL_ID_0</name>
          <description>DMA PrimeCell ID 0</description>
          <addressOffset>0xFF0</addressOffset>
          <resetValue>0x0000000D</resetValue>
          <fields>
            <field>
              <name>PRIMECELL_ID_0</name>
              <description>PrimeCell Identification</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PRIMECELL_ID_1</name>
          <description>DMA PrimeCell ID 1</description>
          <addressOffset>0xFF4</addressOffset>
          <resetValue>0x000000F0</resetValue>
          <fields>
            <field>
              <name>PRIMECELL_ID_1</name>
              <description>PrimeCell Identification</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PRIMECELL_ID_2</name>
          <description>DMA PrimeCell ID 2</description>
          <addressOffset>0xFF8</addressOffset>
          <resetValue>0x00000005</resetValue>
          <fields>
            <field>
              <name>PRIMECELL_ID_2</name>
              <description>PrimeCell Identification</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PRIMECELL_ID_3</name>
          <description>DMA PrimeCell ID 3</description>
          <addressOffset>0xFFC</addressOffset>
          <resetValue>0x000000B1</resetValue>
          <fields>
            <field>
              <name>PRIMECELL_ID_3</name>
              <description>PrimeCell Identification</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>IOCONFIG</name>
      <version>1.0</version>
      <description>IO Pin Configuration Peripheral</description>
      <baseAddress>0x40011000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <dim>16</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>PORTA[%s]</name>
          <description>PORTA Pin Configuration Register</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FLTTYPE</name>
              <description>Input Filter Selectoin</description>
              <bitRange>[2:0]</bitRange>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SYNC</name>
                  <description>Synchronize to system clock</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIRECT</name>
                  <description>Direct input, no synchronization</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FILTER1</name>
                  <description>Require 2 samples to have the same value</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FILTER2</name>
                  <description>Require 3 samples to have the same value</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FILTER3</name>
                  <description>Require 4 samples to have the same value</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FILTER4</name>
                  <description>Require 5 samples to have the same value</description>
                  <value>5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FLTCLK</name>
              <description>Input Filter Clock Selection</description>
              <bitRange>[5:3]</bitRange>
            </field>
            <field>
              <name>INVINP</name>
              <description>Input Invert Selection</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>IEWO</name>
              <description>Input Enable While Output enabled</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>OPENDRN</name>
              <description>Output Open Drain Mode</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>INVOUT</name>
              <description>Output Invert Selection</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>PLEVEL</name>
              <description>Internal Pull up/down level</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>PEN</name>
              <description>Enable Internal Pull up/down</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>PWOA</name>
              <description>Enable Pull when output active</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>FUNSEL</name>
              <description>Pin Function Selection</description>
              <bitRange>[15:13]</bitRange>
            </field>
            <field>
              <name>IODIS</name>
              <description>IO Pin Disable</description>
              <bitRange>[16:16]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="PORTA[%s]">
          <name>PORTB[%s]</name>
          <description>PORTB Pin Configuration Register</description>
          <addressOffset>0x40</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="PORTA[%s]">
          <name>PORTC[%s]</name>
          <description>PORTC Pin Configuration Register</description>
          <addressOffset>0x80</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="PORTA[%s]">
          <name>PORTD[%s]</name>
          <description>PORTD Pin Configuration Register</description>
          <addressOffset>0xC0</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="PORTA[%s]">
          <name>PORTE[%s]</name>
          <description>PORTE Pin Configuration Register</description>
          <addressOffset>0x100</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="PORTA[%s]">
          <name>PORTF[%s]</name>
          <description>PORTF Pin Configuration Register</description>
          <addressOffset>0x140</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="PORTA[%s]">
          <dim>8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>PORTG[%s]</name>
          <description>PORTG Pin Configuration Register</description>
          <addressOffset>0x180</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV0</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1C0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV1</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1C4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV2</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1C8</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV3</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1CC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV4</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1D0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV5</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1D4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV6</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1D8</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>CLKDIV7</name>
          <description>Clock divide value. 0 will disable the clock</description>
          <addressOffset>0x1DC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x028207E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UTILITY</name>
      <version>1.0</version>
      <description>Utility Peripheral</description>
      <baseAddress>0x40020000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>SYND_DATA</name>
          <description>Data Register</description>
          <addressOffset>0x0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>SYND_SYND</name>
          <description>Syndrome Data Register</description>
          <addressOffset>0x4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYND_SYND</name>
              <description>Provides bits 11:0 for syndrome, 2x6-bit</description>
              <bitRange>[11:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYND_ENC_32_44</name>
          <description>EDAC Encode</description>
          <addressOffset>0x8</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYND_ENC_31_16</name>
              <description>Computed syndrome value for bits 31-16</description>
              <bitRange>[11:6]</bitRange>
            </field>
            <field>
              <name>SYND_ENC_7_0</name>
              <description>Computed syndrome value for bits 15-0</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYND_CHECK_32_44_DATA</name>
          <description>EDAC Decode Data</description>
          <addressOffset>0xC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>SYND_CHECK_32_44_SYND</name>
          <description>EDAC Decode Syndrome</description>
          <addressOffset>0x10</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MBE</name>
              <description>Multiple bit error detect status</description>
              <bitRange>[15:14]</bitRange>
            </field>
            <field>
              <name>SBE</name>
              <description>Single bit error detect status</description>
              <bitRange>[13:12]</bitRange>
            </field>
            <field>
              <name>SYND_CHECK_32_44_SYND</name>
              <description>Correct syndrome value</description>
              <bitRange>[11:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ROM_TRAP_ADDRESS</name>
          <description>ROM EDAC Trap Address</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable Trap mode</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>ADDR</name>
              <description>Address bits for trap match</description>
              <bitRange>[30:2]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ROM_TRAP_SYND</name>
          <description>ROM EDAC Trap Syndrome</description>
          <addressOffset>0x18</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>R0M_SYND_31_16</name>
              <description>6-bit syndrome value for bits 31-16</description>
              <bitRange>[11:6]</bitRange>
            </field>
            <field>
              <name>ROM_SYND_7_0</name>
              <description>6-bit syndrome value for bits 15-0</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RAM_TRAP_ADDR0</name>
          <description>RAM0 EDAC Trap Address</description>
          <addressOffset>0x1C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable Trap mode</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>ADDR</name>
              <description>Address bits for trap match</description>
              <bitRange>[30:2]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RAM_TRAP_SYND0</name>
          <description>RAM0 EDAC Trap Syndrome</description>
          <addressOffset>0x20</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAM_SYND_31_16</name>
              <description>6-bit syndrome value for bits 31-16</description>
              <bitRange>[11:6]</bitRange>
            </field>
            <field>
              <name>RAM_SYND_7_0</name>
              <description>6-bit syndrome value for bits 15-0</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RAM_TRAP_ADDR1</name>
          <description>RAM1 EDAC Trap Address</description>
          <addressOffset>0x24</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable Trap mode</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>ADDR</name>
              <description>Address bits for trap match</description>
              <bitRange>[30:2]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RAM_TRAP_SYND1</name>
          <description>RAM1 EDAC Trap Syndrome</description>
          <addressOffset>0x28</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAM_SYND_31_16</name>
              <description>6-bit syndrome value for bits 31-16</description>
              <bitRange>[11:6]</bitRange>
            </field>
            <field>
              <name>RAM_SYND_7_0</name>
              <description>6-bit syndrome value for bits 15-0</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYND_ENC_32_52</name>
          <description>EDAC Encode</description>
          <addressOffset>0x120</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYND_ENC_32_52</name>
              <description>Computed syndrome value for bits 15-0</description>
              <bitRange>[19:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYND_CHECK_32_52_DATA</name>
          <description>EDAC Decode Data</description>
          <addressOffset>0x124</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>SYND_CHECK_32_52_SYND</name>
          <description>EDAC Decode Syndrome</description>
          <addressOffset>0x128</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MBE</name>
              <description>Multiple bit error detect status</description>
              <bitRange>[31:28]</bitRange>
            </field>
            <field>
              <name>SBE</name>
              <description>Single bit error detect status</description>
              <bitRange>[27:24]</bitRange>
            </field>
            <field>
              <name>SYND_CHECK_32_52_SYND</name>
              <description>Corrected syndrome value</description>
              <bitRange>[19:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x028407E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PORTA</name>
      <version>1.0</version>
      <description>GPIO Peripheral</description>
      <groupName>GPIO</groupName>
      <headerStructName>GPIO</headerStructName>
      <baseAddress>0x40012000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PORTA0</name>
        <value>78</value>
      </interrupt>
      <interrupt>
        <name>PORTA1</name>
        <value>79</value>
      </interrupt>
      <interrupt>
        <name>PORTA2</name>
        <value>80</value>
      </interrupt>
      <interrupt>
        <name>PORTA3</name>
        <value>81</value>
      </interrupt>
      <interrupt>
        <name>PORTA4</name>
        <value>82</value>
      </interrupt>
      <interrupt>
        <name>PORTA5</name>
        <value>83</value>
      </interrupt>
      <interrupt>
        <name>PORTA6</name>
        <value>84</value>
      </interrupt>
      <interrupt>
        <name>PORTA7</name>
        <value>85</value>
      </interrupt>
      <interrupt>
        <name>PORTA8</name>
        <value>86</value>
      </interrupt>
      <interrupt>
        <name>PORTA9</name>
        <value>87</value>
      </interrupt>
      <interrupt>
        <name>PORTA10</name>
        <value>88</value>
      </interrupt>
      <interrupt>
        <name>PORTA11</name>
        <value>89</value>
      </interrupt>
      <interrupt>
        <name>PORTA12</name>
        <value>90</value>
      </interrupt>
      <interrupt>
        <name>PORTA13</name>
        <value>91</value>
      </interrupt>
      <interrupt>
        <name>PORTA14</name>
        <value>92</value>
      </interrupt>
      <interrupt>
        <name>PORTA15</name>
        <value>93</value>
      </interrupt>
      <interrupt>
        <name>PORTB0</name>
        <value>94</value>
      </interrupt>
      <interrupt>
        <name>PORTB1</name>
        <value>95</value>
      </interrupt>
      <interrupt>
        <name>PORTB2</name>
        <value>96</value>
      </interrupt>
      <interrupt>
        <name>PORTB3</name>
        <value>97</value>
      </interrupt>
      <interrupt>
        <name>PORTB4</name>
        <value>98</value>
      </interrupt>
      <interrupt>
        <name>PORTB5</name>
        <value>99</value>
      </interrupt>
      <interrupt>
        <name>PORTB6</name>
        <value>100</value>
      </interrupt>
      <interrupt>
        <name>PORTB7</name>
        <value>101</value>
      </interrupt>
      <interrupt>
        <name>PORTB8</name>
        <value>102</value>
      </interrupt>
      <interrupt>
        <name>PORTB9</name>
        <value>103</value>
      </interrupt>
      <interrupt>
        <name>PORTB10</name>
        <value>104</value>
      </interrupt>
      <interrupt>
        <name>PORTB11</name>
        <value>105</value>
      </interrupt>
      <interrupt>
        <name>PORTB12</name>
        <value>106</value>
      </interrupt>
      <interrupt>
        <name>PORTB13</name>
        <value>107</value>
      </interrupt>
      <interrupt>
        <name>PORTB14</name>
        <value>108</value>
      </interrupt>
      <interrupt>
        <name>PORTB15</name>
        <value>109</value>
      </interrupt>
      <interrupt>
        <name>PORTC0</name>
        <value>110</value>
      </interrupt>
      <interrupt>
        <name>PORTC1</name>
        <value>111</value>
      </interrupt>
      <interrupt>
        <name>PORTC2</name>
        <value>112</value>
      </interrupt>
      <interrupt>
        <name>PORTC3</name>
        <value>113</value>
      </interrupt>
      <interrupt>
        <name>PORTC4</name>
        <value>114</value>
      </interrupt>
      <interrupt>
        <name>PORTC5</name>
        <value>115</value>
      </interrupt>
      <interrupt>
        <name>PORTC6</name>
        <value>116</value>
      </interrupt>
      <interrupt>
        <name>PORTC7</name>
        <value>117</value>
      </interrupt>
      <interrupt>
        <name>PORTC8</name>
        <value>118</value>
      </interrupt>
      <interrupt>
        <name>PORTC9</name>
        <value>119</value>
      </interrupt>
      <interrupt>
        <name>PORTC10</name>
        <value>120</value>
      </interrupt>
      <interrupt>
        <name>PORTC11</name>
        <value>121</value>
      </interrupt>
      <interrupt>
        <name>PORTC12</name>
        <value>122</value>
      </interrupt>
      <interrupt>
        <name>PORTC13</name>
        <value>123</value>
      </interrupt>
      <interrupt>
        <name>PORTC14</name>
        <value>124</value>
      </interrupt>
      <interrupt>
        <name>PORTC15</name>
        <value>125</value>
      </interrupt>
      <interrupt>
        <name>PORTD0</name>
        <value>126</value>
      </interrupt>
      <interrupt>
        <name>PORTD1</name>
        <value>127</value>
      </interrupt>
      <interrupt>
        <name>PORTD2</name>
        <value>128</value>
      </interrupt>
      <interrupt>
        <name>PORTD3</name>
        <value>129</value>
      </interrupt>
      <interrupt>
        <name>PORTD4</name>
        <value>130</value>
      </interrupt>
      <interrupt>
        <name>PORTD5</name>
        <value>131</value>
      </interrupt>
      <interrupt>
        <name>PORTD6</name>
        <value>132</value>
      </interrupt>
      <interrupt>
        <name>PORTD7</name>
        <value>133</value>
      </interrupt>
      <interrupt>
        <name>PORTD8</name>
        <value>134</value>
      </interrupt>
      <interrupt>
        <name>PORTD9</name>
        <value>135</value>
      </interrupt>
      <interrupt>
        <name>PORTD10</name>
        <value>136</value>
      </interrupt>
      <interrupt>
        <name>PORTD11</name>
        <value>137</value>
      </interrupt>
      <interrupt>
        <name>PORTD12</name>
        <value>138</value>
      </interrupt>
      <interrupt>
        <name>PORTD13</name>
        <value>139</value>
      </interrupt>
      <interrupt>
        <name>PORTD14</name>
        <value>140</value>
      </interrupt>
      <interrupt>
        <name>PORTD15</name>
        <value>141</value>
      </interrupt>
      <interrupt>
        <name>PORTE0</name>
        <value>142</value>
      </interrupt>
      <interrupt>
        <name>PORTE1</name>
        <value>143</value>
      </interrupt>
      <interrupt>
        <name>PORTE2</name>
        <value>144</value>
      </interrupt>
      <interrupt>
        <name>PORTE3</name>
        <value>145</value>
      </interrupt>
      <interrupt>
        <name>PORTE4</name>
        <value>146</value>
      </interrupt>
      <interrupt>
        <name>PORTE5</name>
        <value>147</value>
      </interrupt>
      <interrupt>
        <name>PORTE6</name>
        <value>148</value>
      </interrupt>
      <interrupt>
        <name>PORTE7</name>
        <value>149</value>
      </interrupt>
      <interrupt>
        <name>PORTE8</name>
        <value>150</value>
      </interrupt>
      <interrupt>
        <name>PORTE9</name>
        <value>151</value>
      </interrupt>
      <interrupt>
        <name>PORTE10</name>
        <value>152</value>
      </interrupt>
      <interrupt>
        <name>PORTE11</name>
        <value>153</value>
      </interrupt>
      <interrupt>
        <name>PORTE12</name>
        <value>154</value>
      </interrupt>
      <interrupt>
        <name>PORTE13</name>
        <value>155</value>
      </interrupt>
      <interrupt>
        <name>PORTE14</name>
        <value>156</value>
      </interrupt>
      <interrupt>
        <name>PORTE15</name>
        <value>157</value>
      </interrupt>
      <interrupt>
        <name>PORTF0</name>
        <value>158</value>
      </interrupt>
      <interrupt>
        <name>PORTF1</name>
        <value>159</value>
      </interrupt>
      <interrupt>
        <name>PORTF2</name>
        <value>160</value>
      </interrupt>
      <interrupt>
        <name>PORTF3</name>
        <value>161</value>
      </interrupt>
      <interrupt>
        <name>PORTF4</name>
        <value>162</value>
      </interrupt>
      <interrupt>
        <name>PORTF5</name>
        <value>163</value>
      </interrupt>
      <interrupt>
        <name>PORTF6</name>
        <value>164</value>
      </interrupt>
      <interrupt>
        <name>PORTF7</name>
        <value>165</value>
      </interrupt>
      <interrupt>
        <name>PORTF8</name>
        <value>166</value>
      </interrupt>
      <interrupt>
        <name>PORTF9</name>
        <value>167</value>
      </interrupt>
      <interrupt>
        <name>PORTF10</name>
        <value>168</value>
      </interrupt>
      <interrupt>
        <name>PORTF11</name>
        <value>169</value>
      </interrupt>
      <interrupt>
        <name>PORTF12</name>
        <value>170</value>
      </interrupt>
      <interrupt>
        <name>PORTF13</name>
        <value>171</value>
      </interrupt>
      <interrupt>
        <name>PORTF14</name>
        <value>172</value>
      </interrupt>
      <interrupt>
        <name>PORTF15</name>
        <value>173</value>
      </interrupt>
      <registers>
        <register>
          <name>DATAIN</name>
          <description>Data In Register</description>
          <addressOffset>0x0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>0x1</dimIncrement>
          <name>DATAINBYTE[%s]</name>
          <description>Data In Register by Byte</description>
          <alternateRegister>DATAIN</alternateRegister>
          <addressOffset>0x0</addressOffset>
          <size>0x8</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAIN">
          <name>DATAINRAW</name>
          <description>Data In Raw Register</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAINBYTE[%s]">
          <name>DATAINRAWBYTE[%s]</name>
          <description>Data In Raw Register by Byte</description>
          <alternateRegister>DATAINRAW</alternateRegister>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DATAOUT</name>
          <description>Data Out Register</description>
          <addressOffset>0x8</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>0x1</dimIncrement>
          <name>DATAOUTBYTE[%s]</name>
          <description>Data Out Register by Byte</description>
          <alternateRegister>DATAOUT</alternateRegister>
          <addressOffset>0x8</addressOffset>
          <size>0x8</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUT">
          <name>DATAOUTRAW</name>
          <description>Data Out Register</description>
          <addressOffset>0xC</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUTBYTE[%s]">
          <name>DATAOUTRAWBYTE[%s]</name>
          <description>Data Out Register by Byte</description>
          <alternateRegister>DATAOUTRAW</alternateRegister>
          <addressOffset>0xC</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUT">
          <name>SETOUT</name>
          <description>Set Out Register</description>
          <addressOffset>0x10</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUTBYTE[%s]">
          <name>SETOUTBYTE[%s]</name>
          <description>Set Out Register by Byte</description>
          <alternateRegister>SETOUT</alternateRegister>
          <addressOffset>0x10</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUT">
          <name>CLROUT</name>
          <description>Clear Out Register</description>
          <addressOffset>0x14</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUTBYTE[%s]">
          <name>CLROUTBYTE[%s]</name>
          <description>Clear Out Register by Byte</description>
          <alternateRegister>CLROUT</alternateRegister>
          <addressOffset>0x14</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUT">
          <name>TOGOUT</name>
          <description>Toggle Out Register</description>
          <addressOffset>0x18</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAOUTBYTE[%s]">
          <name>TOGOUTBYTE[%s]</name>
          <description>Toggle Out Register by Byte</description>
          <alternateRegister>TOGOUT</alternateRegister>
          <addressOffset>0x18</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DATAMASK</name>
          <description>Data mask Register</description>
          <addressOffset>0x1C</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>0x1</dimIncrement>
          <name>DATAMASKBYTE[%s]</name>
          <description>Data Out Register by Byte</description>
          <alternateRegister>DATAMASK</alternateRegister>
          <addressOffset>0x1C</addressOffset>
          <size>0x8</size>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASK">
          <name>DIR</name>
          <description>Direction Register (1:Output, 0:Input)</description>
          <addressOffset>0x20</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASKBYTE[%s]">
          <name>DIRBYTE[%s]</name>
          <description>Direction Register by Byte</description>
          <alternateRegister>DIR</alternateRegister>
          <addressOffset>0x20</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASK">
          <name>PULSE</name>
          <description>Pulse Mode Register</description>
          <addressOffset>0x24</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASKBYTE[%s]">
          <name>PULSEBYTE[%s]</name>
          <description>Pulse Mode Register by Byte</description>
          <alternateRegister>PULSE</alternateRegister>
          <addressOffset>0x24</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASK">
          <name>PULSEBASE</name>
          <description>Pulse Base Value Register</description>
          <addressOffset>0x28</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASKBYTE[%s]">
          <name>PULSEBASEBYTE[%s]</name>
          <description>Pulse Base Mode Register by Byte</description>
          <alternateRegister>PULSEBASE</alternateRegister>
          <addressOffset>0x28</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASK">
          <name>DELAY1</name>
          <description>Delay1 Register</description>
          <addressOffset>0x2C</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASKBYTE[%s]">
          <name>DELAY1BYTE[%s]</name>
          <description>Delay1 Register by Byte</description>
          <alternateRegister>DELAY1</alternateRegister>
          <addressOffset>0x2C</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASK">
          <name>DELAY2</name>
          <description>Delay2 Register</description>
          <addressOffset>0x30</addressOffset>
          <size>0x20</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="DATAMASKBYTE[%s]">
          <name>DELAY2BYTE[%s]</name>
          <description>Delay2 Register by Byte</description>
          <alternateRegister>DELAY2</alternateRegister>
          <addressOffset>0x30</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_SEN</name>
          <description>Interrupt Sense Register (1:Level Sensitive, 0:Edge Sensitive)</description>
          <addressOffset>0x34</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_EDGE</name>
          <description>Interrupt Both Edge Register (1:Both Edges, 0:Single Edge)</description>
          <addressOffset>0x38</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_EVT</name>
          <description>Interrupt Event Register (1:HighLevel/L->H Edge, 0:LowLevel/H->L Edge)</description>
          <addressOffset>0x3C</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x40</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_RAW</name>
          <description>Raw Interrupt Status</description>
          <addressOffset>0x44</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_END</name>
          <description>Masked Interrupt Status</description>
          <addressOffset>0x48</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>EDGE_STATUS</name>
          <description>Edge Status Register</description>
          <addressOffset>0x4C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0x3FC</addressOffset>
          <size>0x20</size>
          <access>read-only</access>
          <resetValue>0x021007E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="PORTA">
      <name>PORTB</name>
      <baseAddress>0x40012400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="PORTA">
      <name>PORTC</name>
      <baseAddress>0x40012800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="PORTA">
      <name>PORTD</name>
      <baseAddress>0x40012C00</baseAddress>
    </peripheral>
    <peripheral derivedFrom="PORTA">
      <name>PORTE</name>
      <baseAddress>0x40013000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="PORTA">
      <name>PORTF</name>
      <baseAddress>0x40013400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="PORTA">
      <name>PORTG</name>
      <baseAddress>0x40013800</baseAddress>
    </peripheral>
    <peripheral>
      <name>TIM0</name>
      <version>1.0</version>
      <description>Timer/Counter Peripheral</description>
      <groupName>Timer_Counter</groupName>
      <headerStructName>TIM</headerStructName>
      <baseAddress>0x40018000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TIM0</name>
        <value>48</value>
      </interrupt>
      <interrupt>
        <name>TIM1</name>
        <value>49</value>
      </interrupt>
      <interrupt>
        <name>TIM2</name>
        <value>50</value>
      </interrupt>
      <interrupt>
        <name>TIM3</name>
        <value>51</value>
      </interrupt>
      <interrupt>
        <name>TIM4</name>
        <value>52</value>
      </interrupt>
      <interrupt>
        <name>TIM5</name>
        <value>53</value>
      </interrupt>
      <interrupt>
        <name>TIM6</name>
        <value>54</value>
      </interrupt>
      <interrupt>
        <name>TIM7</name>
        <value>55</value>
      </interrupt>
      <interrupt>
        <name>TIM8</name>
        <value>56</value>
      </interrupt>
      <interrupt>
        <name>TIM9</name>
        <value>57</value>
      </interrupt>
      <interrupt>
        <name>TIM10</name>
        <value>58</value>
      </interrupt>
      <interrupt>
        <name>TIM11</name>
        <value>59</value>
      </interrupt>
      <interrupt>
        <name>TIM12</name>
        <value>60</value>
      </interrupt>
      <interrupt>
        <name>TIM13</name>
        <value>61</value>
      </interrupt>
      <interrupt>
        <name>TIM14</name>
        <value>62</value>
      </interrupt>
      <interrupt>
        <name>TIM15</name>
        <value>63</value>
      </interrupt>
      <interrupt>
        <name>TIM16</name>
        <value>64</value>
      </interrupt>
      <interrupt>
        <name>TIM17</name>
        <value>65</value>
      </interrupt>
      <interrupt>
        <name>TIM18</name>
        <value>66</value>
      </interrupt>
      <interrupt>
        <name>TIM19</name>
        <value>67</value>
      </interrupt>
      <interrupt>
        <name>TIM20</name>
        <value>68</value>
      </interrupt>
      <interrupt>
        <name>TIM21</name>
        <value>69</value>
      </interrupt>
      <interrupt>
        <name>TIM22</name>
        <value>70</value>
      </interrupt>
      <interrupt>
        <name>TIM23</name>
        <value>71</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL</name>
          <description>Control Register</description>
          <addressOffset>0x0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Counter Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>ACTIVE</name>
              <description>Counter Active</description>
              <bitRange>[1:1]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>AUTO_DISABLE</name>
              <description>Auto Disables the counter (set ENABLE to 0) when the count reaches 0</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>AUTO_DEACTIVATE</name>
              <description>Auto Deactivate the counter (set ACTIVE to 0) when the count reaches 0</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>IRQ_ENB</name>
              <description>Interrupt Enable</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>STATUS_SEL</name>
              <description>Counter Status Selection</description>
              <bitRange>[7:5]</bitRange>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DONE</name>
                  <description>Single cycle pulse when the counter reaches 0</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ACTIVE</name>
                  <description>Returns the counter ACTIVE bit</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggles the STATUS bit everytime the counter reaches 0. Basically a divide by 2 counter output.</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PWMA</name>
                  <description>Selects the Pulse Width Modulated output. It 1 when the counter value is >= the PWMA_VALUE</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PWMB</name>
                  <description>Selects the Pulse Width Modulated output. It 1 when the counter value is &lt; the PWMA_VALUE and value is > PWMA_VALUE</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLED</name>
                  <description>Returns the counter ENABLED bit</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PWMA_ACTIVE</name>
                  <description>Selects the Pulse Width Modulated output. It 1 when the counter value is &lt;= the PWMA_VALUE and value is >= 0</description>
                  <value>6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STATUS_INV</name>
              <description>Invert the Output Status</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>REQ_STOP</name>
              <description>Stop Request</description>
              <bitRange>[9:9]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RST_VALUE</name>
          <description>The value that counter start from after reaching 0.</description>
          <addressOffset>0x4</addressOffset>
        </register>
        <register>
          <name>CNT_VALUE</name>
          <description>The current value of the counter</description>
          <addressOffset>0x8</addressOffset>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Alternate access to the Counter ENABLE bit in the CTRL Register</description>
          <addressOffset>0xC</addressOffset>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Counter Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CSD_CTRL</name>
          <description>The Cascade Control Register. Controls the counter external enable signals</description>
          <addressOffset>0x10</addressOffset>
          <fields>
            <field>
              <name>CSDEN0</name>
              <description>Cascade 0 Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>CSDINV0</name>
              <description>Cascade 0 Invert</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>CSDEN1</name>
              <description>Cascade 1 Enable</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>CSDINV1</name>
              <description>Cascade 1 Invert</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>DCASOP</name>
              <description>Dual Cascade Operation (0:AND, 1:OR)</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>CSDTRG0</name>
              <description>Cascade 0 Enabled as Trigger</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>CSDTRG1</name>
              <description>Cascade 1 Enabled as Trigger</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>CSDEN2</name>
              <description>Cascade 2 Enable</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>CSDINV2</name>
              <description>Cascade 2 Invert</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>CSDTRG2</name>
              <description>Cascade 2 Trigger mode</description>
              <bitRange>[10:10]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CASCADE0</name>
          <description>Cascade Enable Selection</description>
          <addressOffset>0x14</addressOffset>
          <fields>
            <field>
              <name>CASSEL</name>
              <description>Cascade Selection</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="CASCADE0">
          <name>CASCADE1</name>
          <description>Cascade Enable Selection</description>
          <addressOffset>0x18</addressOffset>
        </register>
        <register derivedFrom="CASCADE0">
          <name>CASCADE2</name>
          <description>Cascade Enable Selection</description>
          <addressOffset>0x1C</addressOffset>
        </register>
        <register>
          <name>PWM_VALUE</name>
          <description>The Pulse Width Modulation Value</description>
          <addressOffset>0x20</addressOffset>
        </register>
        <register>
          <name>PWMA_VALUE</name>
          <description>The Pulse Width Modulation ValueA</description>
          <alternateRegister>PWM_VALUE</alternateRegister>
          <addressOffset>0x20</addressOffset>
        </register>
        <register>
          <name>PWMB_VALUE</name>
          <description>The Pulse Width Modulation ValueB</description>
          <addressOffset>0x24</addressOffset>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0x3FC</addressOffset>
          <access>read-only</access>
          <resetValue>0x021107E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM1</name>
      <baseAddress>0x40018400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM2</name>
      <baseAddress>0x40018800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM3</name>
      <baseAddress>0x40018C00</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM4</name>
      <baseAddress>0x40019000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM5</name>
      <baseAddress>0x40019400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM6</name>
      <baseAddress>0x40019800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM7</name>
      <baseAddress>0x40019C00</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM8</name>
      <baseAddress>0x4001A000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM9</name>
      <baseAddress>0x4001A400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM10</name>
      <baseAddress>0x4001A800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM11</name>
      <baseAddress>0x4001AC00</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM12</name>
      <baseAddress>0x4001B000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM13</name>
      <baseAddress>0x4001B400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM14</name>
      <baseAddress>0x4001B800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM15</name>
      <baseAddress>0x4001BC00</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM16</name>
      <baseAddress>0x40028000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM17</name>
      <baseAddress>0x40028400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM18</name>
      <baseAddress>0x40028800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM19</name>
      <baseAddress>0x40028C00</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM20</name>
      <baseAddress>0x40029000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM21</name>
      <baseAddress>0x40029400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM22</name>
      <baseAddress>0x40029800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="TIM0">
      <name>TIM23</name>
      <baseAddress>0x40029C00</baseAddress>
    </peripheral>
    <peripheral>
      <name>UART0</name>
      <version>1.0</version>
      <description>UART Peripheral</description>
      <groupName>UART</groupName>
      <headerStructName>UART</headerStructName>
      <baseAddress>0x40024000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UART0_TX</name>
        <value>24</value>
      </interrupt>
      <interrupt>
        <name>UART0_RX</name>
        <value>25</value>
      </interrupt>
      <interrupt>
        <name>UART1_TX</name>
        <value>26</value>
      </interrupt>
      <interrupt>
        <name>UART1_RX</name>
        <value>27</value>
      </interrupt>
      <interrupt>
        <name>UART2_TX</name>
        <value>28</value>
      </interrupt>
      <interrupt>
        <name>UART2_RX</name>
        <value>29</value>
      </interrupt>
      <registers>
        <register>
          <name>DATA</name>
          <description>Data In/Out Register</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable Register</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXENABLE</name>
              <description>Rx Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TXENABLE</name>
              <description>Tx Enable</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL</name>
          <description>Control Register</description>
          <addressOffset>0x8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PAREN</name>
              <description>Parity Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>PAREVEN</name>
              <description>Parity Even/Odd(1/0)</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>PARSTK</name>
              <description>Parity Sticky</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>STOPBITS</name>
              <description>Stop Bits 1/2(0/1)</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>WORDSIZE</name>
              <description>Word Size in Bits 5/6/7/8(00/01/10/11)</description>
              <bitRange>[5:4]</bitRange>
            </field>
            <field>
              <name>LOOPBACK</name>
              <description>Loopback Enable</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>LOOPBACKBLK</name>
              <description>Loopback Block</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>AUTOCTS</name>
              <description>Enable Auto CTS mode</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>DEFRTS</name>
              <description>Default RTSn value</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>AUTORTS</name>
              <description>Enable Auto RTS mode</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>BAUD8</name>
              <description>Enable BAUD8 mode</description>
              <bitRange>[11:11]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CLKSCALE</name>
          <description>Clock Scale Register</description>
          <addressOffset>0xC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FRAC</name>
              <description>Fractional Divide (64ths)</description>
              <bitRange>[5:0]</bitRange>
            </field>
            <field>
              <name>INT</name>
              <description>Integer Divide</description>
              <bitRange>[23:6]</bitRange>
            </field>
            <field>
              <name>RESET</name>
              <description>Reset Baud Counter</description>
              <bitRange>[31:31]</bitRange>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RXSTATUS</name>
          <description>Status Register</description>
          <addressOffset>0x10</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDAVL</name>
              <description>Read Data Available</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>RDNFULL</name>
              <description>Read Fifo NOT Full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>RXBUSY</name>
              <description>RX Busy Receiving</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>RXTO</name>
              <description>RX Receive Timeout</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXOVR</name>
              <description>Read Fifo Overflow</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RXFRM</name>
              <description>RX Framing Error</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>RXPAR</name>
              <description>RX Parity Error</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>RXBRK</name>
              <description>RX Break Error</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>RXBUSYBRK</name>
              <description>RX Busy Receiving Break</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RXADDR9</name>
              <description>Address Match for 9 bit mode</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RXRTSN</name>
              <description>RX RTSn Output Value</description>
              <bitRange>[15:15]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXSTATUS</name>
          <description>Status Register</description>
          <addressOffset>0x14</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WRRDY</name>
              <description>Write Fifo NOT Full</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>WRBUSY</name>
              <description>Write Fifo Full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TXBUSY</name>
              <description>TX Busy Transmitting</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>WRLOST</name>
              <description>Write Data Lost (Fifo Overflow)</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TXCTSN</name>
              <description>TX CTSn Input Value</description>
              <bitRange>[15:15]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>FIFO_CLR</name>
          <description>Clear FIFO Register</description>
          <addressOffset>0x18</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXFIFO</name>
              <description>Clear Rx FIFO</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TXFIFO</name>
              <description>Clear Tx FIFO</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXBREAK</name>
          <description>Break Transmit Register</description>
          <addressOffset>0x1C</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>ADDR9</name>
          <description>Address9 Register</description>
          <addressOffset>0x20</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>ADDR9MASK</name>
          <description>Address9 Mask Register</description>
          <addressOffset>0x24</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>IRQ Enable Register</description>
          <addressOffset>0x28</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_RX</name>
              <description>RX Interrupt</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>IRQ_RX_STATUS</name>
              <description>RX Status Interrupt</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>IRQ_RX_TO</name>
              <description>RX Timeout Interrupt</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>IRQ_TX</name>
              <description>TX Interrupt</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>IRQ_TX_STATUS</name>
              <description>TX Status Interrupt</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>IRQ_TX_EMPTY</name>
              <description>TX Empty Interrupt</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>IRQ_TX_CTS</name>
              <description>TX CTS Change Interrupt</description>
              <bitRange>[7:7]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_RAW</name>
          <description>IRQ Raw Status Register</description>
          <addressOffset>0x2C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_END</name>
          <description>IRQ Enabled Status Register</description>
          <addressOffset>0x30</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_CLR</name>
          <description>IRQ Clear Status Register</description>
          <addressOffset>0x34</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>RXFIFOIRQTRG</name>
          <description>Rx FIFO IRQ Trigger Level</description>
          <addressOffset>0x38</addressOffset>
        </register>
        <register>
          <name>TXFIFOIRQTRG</name>
          <description>Tx FIFO IRQ Trigger Level</description>
          <addressOffset>0x3C</addressOffset>
        </register>
        <register>
          <name>RXFIFORTSTRG</name>
          <description>Rx FIFO RTS Trigger Level</description>
          <addressOffset>0x40</addressOffset>
        </register>
        <register>
          <name>STATE</name>
          <description>Internal STATE of UART Controller</description>
          <addressOffset>0x44</addressOffset>
          <size>0x20</size>
          <access>read-only</access>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x021207E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="UART0">
      <name>UART1</name>
      <baseAddress>0x40025000</baseAddress>
    </peripheral>
    <peripheral derivedFrom="UART0">
      <name>UART2</name>
      <baseAddress>0x40017000</baseAddress>
    </peripheral>
    <peripheral>
      <name>SPI0</name>
      <version>1.0</version>
      <description>SPI Peripheral</description>
      <groupName>SPI</groupName>
      <headerStructName>SPI</headerStructName>
      <baseAddress>0x40015000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPI0_TX</name>
        <value>16</value>
      </interrupt>
      <interrupt>
        <name>SPI0_RX</name>
        <value>17</value>
      </interrupt>
      <interrupt>
        <name>SPI1_TX</name>
        <value>18</value>
      </interrupt>
      <interrupt>
        <name>SPI1_RX</name>
        <value>19</value>
      </interrupt>
      <interrupt>
        <name>SPI2_TX</name>
        <value>20</value>
      </interrupt>
      <interrupt>
        <name>SPI2_RX</name>
        <value>21</value>
      </interrupt>
      <interrupt>
        <name>SPI3_TX</name>
        <value>22</value>
      </interrupt>
      <interrupt>
        <name>SPI3_RX</name>
        <value>23</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL0</name>
          <description>Control Register 0</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIZE</name>
              <description>Data Size(0x3=>4, 0xf=>16)</description>
              <bitRange>[3:0]</bitRange>
            </field>
            <field>
              <name>SPO</name>
              <description>SPI Clock Polarity</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>SPH</name>
              <description>SPI Clock Phase</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>SCRDV</name>
              <description>Serial Clock Rate divide+1 value</description>
              <bitRange>[15:8]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL1</name>
          <description>Control Register 1</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LBM</name>
              <description>Loop Back</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>ENABLE</name>
              <description>Enable</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>MS</name>
              <description>Master/Slave (0:Master, 1:Slave)</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>SOD</name>
              <description>Slave output Disable</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>SS</name>
              <description>Slave Select</description>
              <bitRange>[6:4]</bitRange>
            </field>
            <field>
              <name>BLOCKMODE</name>
              <description>Block Mode Enable</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>BMSTART</name>
              <description>Block Mode Start Status Enable</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>BMSTALL</name>
              <description>Block Mode Stall Enable</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>MDLYCAP</name>
              <description>Master Delayed Capture Enable</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>MTXPAUSE</name>
              <description>Master Tx Pause Enable</description>
              <bitRange>[11:11]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA</name>
          <description>Data Input/Output</description>
          <addressOffset>0x8</addressOffset>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status Register</description>
          <addressOffset>0xC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TFE</name>
              <description>Transmit FIFO empty</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TNF</name>
              <description>Transmit FIFO not full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>RNE</name>
              <description>Receive FIFO not empty</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>RFF</name>
              <description>Receive FIFO Full</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>BUSY</name>
              <description>Busy</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RXDATAFIRST</name>
              <description>Pending Data is first Byte in BLOCKMODE</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>RXTRIGGER</name>
              <description>RX FIFO Above Trigger Level</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TXTRIGGER</name>
              <description>TX FIFO Below Trigger Level</description>
              <bitRange>[7:7]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CLKPRESCALE</name>
          <description>Clock Pre Scale divide value</description>
          <addressOffset>0x10</addressOffset>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RORIM</name>
              <description>RX Overrun</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>RTIM</name>
              <description>RX Timeout</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>RXIM</name>
              <description>RX Fifo is at least half full</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXIM</name>
              <description>TX Fifo is at least half empty</description>
              <bitRange>[3:3]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_RAW</name>
          <description>Raw Interrupt Status Register</description>
          <addressOffset>0x18</addressOffset>
          <access>read-only</access>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_END</name>
          <description>Enabled Interrupt Status Register</description>
          <addressOffset>0x1C</addressOffset>
          <access>read-only</access>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_CLR</name>
          <description>Clear Interrupt Status Register</description>
          <addressOffset>0x20</addressOffset>
          <access>write-only</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
        </register>
        <register>
          <name>RXFIFOIRQTRG</name>
          <description>Rx FIFO IRQ Trigger Level</description>
          <addressOffset>0x24</addressOffset>
        </register>
        <register>
          <name>TXFIFOIRQTRG</name>
          <description>Tx FIFO IRQ Trigger Level</description>
          <addressOffset>0x28</addressOffset>
        </register>
        <register>
          <name>FIFO_CLR</name>
          <description>Clear FIFO Register</description>
          <addressOffset>0x2C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXFIFO</name>
              <description>Clear Rx FIFO</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TXFIFO</name>
              <description>Clear Tx FIFO</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>STATE</name>
          <description>Internal STATE of SPI Controller</description>
          <addressOffset>0x30</addressOffset>
          <access>read-only</access>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0x3FC</addressOffset>
          <access>read-only</access>
          <resetValue>0x021307E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="SPI0">
      <name>SPI1</name>
      <baseAddress>0x40015400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="SPI0">
      <name>SPI2</name>
      <baseAddress>0x40015800</baseAddress>
    </peripheral>
    <peripheral derivedFrom="SPI0">
      <name>SPI3</name>
      <baseAddress>0x40015C00</baseAddress>
    </peripheral>
    <peripheral>
      <name>I2C0</name>
      <version>1.0</version>
      <description>I2C Peripheral</description>
      <groupName>I2C</groupName>
      <headerStructName>I2C</headerStructName>
      <baseAddress>0x40016000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>I2C0_MS</name>
        <value>30</value>
      </interrupt>
      <interrupt>
        <name>I2C0_SL</name>
        <value>31</value>
      </interrupt>
      <interrupt>
        <name>I2C1_MS</name>
        <value>32</value>
      </interrupt>
      <interrupt>
        <name>I2C1_SL</name>
        <value>33</value>
      </interrupt>
      <interrupt>
        <name>I2C2_MS</name>
        <value>34</value>
      </interrupt>
      <interrupt>
        <name>I2C2_SL</name>
        <value>35</value>
      </interrupt>
      <interrupt>
        <name>I2C0_MS_RX</name>
        <value>182</value>
      </interrupt>
      <interrupt>
        <name>I2C0_MS_TX</name>
        <value>183</value>
      </interrupt>
      <interrupt>
        <name>I2C0_SL_RX</name>
        <value>184</value>
      </interrupt>
      <interrupt>
        <name>I2C0_SL_TX</name>
        <value>185</value>
      </interrupt>
      <interrupt>
        <name>I2C1_MS_RX</name>
        <value>186</value>
      </interrupt>
      <interrupt>
        <name>I2C1_MS_TX</name>
        <value>187</value>
      </interrupt>
      <interrupt>
        <name>I2C1_SL_RX</name>
        <value>188</value>
      </interrupt>
      <interrupt>
        <name>I2C1_SL_TX</name>
        <value>189</value>
      </interrupt>
      <interrupt>
        <name>I2C2_MS_RX</name>
        <value>190</value>
      </interrupt>
      <interrupt>
        <name>I2C2_MS_TX</name>
        <value>191</value>
      </interrupt>
      <interrupt>
        <name>I2C2_SL_RX</name>
        <value>192</value>
      </interrupt>
      <interrupt>
        <name>I2C2_SL_TX</name>
        <value>193</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL</name>
          <description>Control Register</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKENABLED</name>
              <description>I2C CLK Enabled</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>ENABLED</name>
              <description>I2C Activated</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>ENABLE</name>
              <description>I2C Active</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXFEMD</name>
              <description>TX FIFIO Empty Mode</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXFFMD</name>
              <description>RX FIFO Full Mode</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>ALGFILTER</name>
              <description>Enable Input Analog Glitch Filter</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>DLGFILTER</name>
              <description>Enable Input Digital Glitch Filter</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>LOOPBACK</name>
              <description>Enable LoopBack Mode</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>TMCONFIGENB</name>
              <description>Enable Timing Config Register</description>
              <bitRange>[9:9]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CLKSCALE</name>
          <description>Clock Scale divide value</description>
          <addressOffset>0x4</addressOffset>
          <fields>
            <field>
              <name>VALUE</name>
              <description>Enable FastMode</description>
              <bitRange>[30:0]</bitRange>
            </field>
            <field>
              <name>FASTMODE</name>
              <description>Enable FastMode</description>
              <bitRange>[31:31]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WORDS</name>
          <description>Word Count value</description>
          <addressOffset>0x8</addressOffset>
        </register>
        <register>
          <name>ADDRESS</name>
          <description>I2C Address value</description>
          <addressOffset>0xC</addressOffset>
        </register>
        <register>
          <name>DATA</name>
          <description>Data Input/Output</description>
          <addressOffset>0x10</addressOffset>
        </register>
        <register>
          <name>CMD</name>
          <description>Command Register</description>
          <addressOffset>0x14</addressOffset>
        </register>
        <register>
          <name>STATUS</name>
          <description>I2C Controller Status Register</description>
          <addressOffset>0x18</addressOffset>
          <fields>
            <field>
              <name>I2CIDLE</name>
              <description>I2C bus is idle</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>IDLE</name>
              <description>I2C controller is Idle</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>WAITING</name>
              <description>Controller is Waiting</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>STALLED</name>
              <description>Controller is Stalled</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>ARBLOST</name>
              <description>I2C Arbitration was lost</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>NACKADDR</name>
              <description>I2C Address was not Acknowledged</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>NACKDATA</name>
              <description>I2C Data was not Acknowledged</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>RXNEMPTY</name>
              <description>RX FIFO is Not Empty</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RXFULL</name>
              <description>RX FIFO is Full</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RXTRIGGER</name>
              <description>RX FIFO Above Trigger Level</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TX FIFO is Empty</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>TXNFULL</name>
              <description>TX FIFO is Full</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TXTRIGGER</name>
              <description>TX FIFO Below Trigger Level</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>RAW_SDA</name>
              <description>I2C Raw SDA value</description>
              <bitRange>[30:30]</bitRange>
            </field>
            <field>
              <name>RAW_SCL</name>
              <description>I2C Raw SCL value</description>
              <bitRange>[31:31]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>STATE</name>
          <description>Internal STATE of I2C Master Controller</description>
          <addressOffset>0x1C</addressOffset>
          <access>read-only</access>
        </register>
        <register>
          <name>TXCOUNT</name>
          <description>TX Count Register</description>
          <addressOffset>0x20</addressOffset>
          <access>read-only</access>
        </register>
        <register>
          <name>RXCOUNT</name>
          <description>RX Count Register</description>
          <addressOffset>0x24</addressOffset>
          <access>read-only</access>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x28</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>I2CIDLE</name>
              <description>I2C Bus is Idle</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>IDLE</name>
              <description>Controller is Idle</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>WAITING</name>
              <description>Controller is Waiting</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>STALLED</name>
              <description>Controller is Stalled</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>ARBLOST</name>
              <description>I2C Arbitration was lost</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>NACKADDR</name>
              <description>I2C Address was not Acknowledged</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>NACKDATA</name>
              <description>I2C Data was not Acknowledged</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>CLKLOTO</name>
              <description>I2C Clock Low Timeout</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>TXOVERFLOW</name>
              <description>TX FIFO Overflowed</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>RXOVERFLOW</name>
              <description>TX FIFO Overflowed</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXREADY</name>
              <description>TX FIFO Ready</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>RXREADY</name>
              <description>RX FIFO Ready</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TX FIFO Empty</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>RXFULL</name>
              <description>RX FIFO Full</description>
              <bitRange>[15:15]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_RAW</name>
          <description>Raw Interrupt Status Register</description>
          <addressOffset>0x2C</addressOffset>
          <access>read-only</access>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_END</name>
          <description>Enabled Interrupt Status Register</description>
          <addressOffset>0x30</addressOffset>
          <access>read-only</access>
        </register>
        <register derivedFrom="IRQ_ENB">
          <name>IRQ_CLR</name>
          <description>Clear Interrupt Status Register</description>
          <addressOffset>0x34</addressOffset>
          <access>write-only</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
        </register>
        <register>
          <name>RXFIFOIRQTRG</name>
          <description>Rx FIFO IRQ Trigger Level</description>
          <addressOffset>0x38</addressOffset>
        </register>
        <register>
          <name>TXFIFOIRQTRG</name>
          <description>Tx FIFO IRQ Trigger Level</description>
          <addressOffset>0x3C</addressOffset>
        </register>
        <register>
          <name>FIFO_CLR</name>
          <description>Clear FIFO Register</description>
          <addressOffset>0x40</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXFIFO</name>
              <description>Clear Rx FIFO</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TXFIFO</name>
              <description>Clear Tx FIFO</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TMCONFIG</name>
          <description>Timing Config Register</description>
          <addressOffset>0x44</addressOffset>
        </register>
        <register>
          <name>CLKTOLIMIT</name>
          <description>Clock Low Timeout Limit Register</description>
          <addressOffset>0x48</addressOffset>
        </register>
        <register>
          <name>S0_CTRL</name>
          <description>Slave Control Register</description>
          <addressOffset>0x100</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKENABLED</name>
              <description>I2C Enabled</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>ENABLED</name>
              <description>I2C Activated</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>ENABLE</name>
              <description>I2C Active</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXFEMD</name>
              <description>TX FIFIO Empty Mode</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXFFMD</name>
              <description>RX FIFO Full Mode</description>
              <bitRange>[4:4]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_MAXWORDS</name>
          <description>Slave MaxWords Register</description>
          <addressOffset>0x104</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MAXWORD</name>
              <description>Max Word Count</description>
              <bitRange>[10:0]</bitRange>
            </field>
            <field>
              <name>ENABLE</name>
              <description>Enables the max word count</description>
              <bitRange>[31:31]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_ADDRESS</name>
          <description>Slave I2C Address Value</description>
          <addressOffset>0x108</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>A10MODE</name>
              <description>Enable 10b address mode</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>ADDRESS</name>
              <description>Address value</description>
              <bitRange>[10:1]</bitRange>
            </field>
            <field>
              <name>RW</name>
              <description>Read/Write value</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_ADDRESSMASK</name>
          <description>Slave I2C Address Mask value</description>
          <addressOffset>0x10C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MASK</name>
              <description>Address mask value</description>
              <bitRange>[10:1]</bitRange>
            </field>
            <field>
              <name>RWMASK</name>
              <description>Read/Write mask</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_DATA</name>
          <description>Slave Data Input/Output</description>
          <addressOffset>0x110</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VALUE</name>
              <description>I2C data value</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_LASTADDRESS</name>
          <description>Slave I2C Last Address value</description>
          <addressOffset>0x114</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDRESS</name>
              <description>Address value</description>
              <bitRange>[10:1]</bitRange>
            </field>
            <field>
              <name>DIRECTION</name>
              <description>Transaction direction 0=master send, 1=master receive</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_STATUS</name>
          <description>Slave I2C Controller Status Register</description>
          <addressOffset>0x118</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COMPLETED</name>
              <description>Controller Complted a Transaction</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>IDLE</name>
              <description>Controller is Idle</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>WAITING</name>
              <description>Controller is Waiting</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXSTALLED</name>
              <description>Controller is Tx Stalled</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXSTALLED</name>
              <description>Controller is Rx Stalled</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>ADDRESSMATCH</name>
              <description>I2C Address Match</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>NACKDATA</name>
              <description>I2C Data was not Acknowledged</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>RXDATAFIRST</name>
              <description>Pending Data is first Byte following Address</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>RXNEMPTY</name>
              <description>RX FIFO is Not Empty</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RXFULL</name>
              <description>RX FIFO is Full</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RXTRIGGER</name>
              <description>RX FIFO Above Trigger Level</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TX FIFO is Empty</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>TXNFULL</name>
              <description>TX FIFO is Full</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TXTRIGGER</name>
              <description>TX FIFO Below Trigger Level</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>RAW_BUSY</name>
              <description>I2C Raw Busy value</description>
              <bitRange>[29:29]</bitRange>
            </field>
            <field>
              <name>RAW_SDA</name>
              <description>I2C Raw SDA value</description>
              <bitRange>[30:30]</bitRange>
            </field>
            <field>
              <name>RAW_SCL</name>
              <description>I2C Raw SCL value</description>
              <bitRange>[31:31]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_STATE</name>
          <description>Internal STATE of I2C Slave Controller</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-only</access>
        </register>
        <register>
          <name>S0_TXCOUNT</name>
          <description>Slave TX Count Register</description>
          <addressOffset>0x120</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VALUE</name>
              <description>Count value</description>
              <bitRange>[10:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_RXCOUNT</name>
          <description>Slave RX Count Register</description>
          <addressOffset>0x124</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VALUE</name>
              <description>Count value</description>
              <bitRange>[10:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_IRQ_ENB</name>
          <description>Slave Interrupt Enable Register</description>
          <addressOffset>0x128</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COMPLETED</name>
              <description>Controller Complted a Transaction</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>IDLE</name>
              <description>Controller is Idle</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>WAITING</name>
              <description>Controller is Waiting</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXSTALLED</name>
              <description>Controller is Tx Stalled</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXSTALLED</name>
              <description>Controller is Rx Stalled</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>ADDRESSMATCH</name>
              <description>I2C Address Match</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>NACKDATA</name>
              <description>I2C Data was not Acknowledged</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>RXDATAFIRST</name>
              <description>Pending Data is first Byte following Address</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>I2C_START</name>
              <description>I2C Start Condition</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>I2C_STOP</name>
              <description>I2C Stop Condition</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>TXUNDERFLOW</name>
              <description>TX FIFO Underflowed</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>RXOVERFLOW</name>
              <description>TX FIFO Overflowed</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXREADY</name>
              <description>TX FIFO Ready</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>RXREADY</name>
              <description>RX FIFO Ready</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TX FIFO Empty</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>RXFULL</name>
              <description>RX FIFO Full</description>
              <bitRange>[15:15]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="S0_IRQ_ENB">
          <name>S0_IRQ_RAW</name>
          <description>Slave Raw Interrupt Status Register</description>
          <addressOffset>0x12C</addressOffset>
          <access>read-only</access>
        </register>
        <register derivedFrom="S0_IRQ_ENB">
          <name>S0_IRQ_END</name>
          <description>Slave Enabled Interrupt Status Register</description>
          <addressOffset>0x130</addressOffset>
          <access>read-only</access>
        </register>
        <register derivedFrom="S0_IRQ_ENB">
          <name>S0_IRQ_CLR</name>
          <description>Slave Clear Interrupt Status Register</description>
          <addressOffset>0x134</addressOffset>
          <access>write-only</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
        </register>
        <register>
          <name>S0_RXFIFOIRQTRG</name>
          <description>Slave Rx FIFO IRQ Trigger Level</description>
          <addressOffset>0x138</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LEVEL</name>
              <description>Half full level for the Rx FIFO</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_TXFIFOIRQTRG</name>
          <description>Slave Tx FIFO IRQ Trigger Level</description>
          <addressOffset>0x13C</addressOffset>
          <resetValue>0x00000008</resetValue>
          <fields>
            <field>
              <name>LEVEL</name>
              <description>Half full level for the Rx FIFO</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_FIFO_CLR</name>
          <description>Slave Clear FIFO Register</description>
          <addressOffset>0x140</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXFIFO</name>
              <description>Clear Rx FIFO</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>TXFIFO</name>
              <description>Clear Tx FIFO</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_ADDRESSB</name>
          <description>Slave I2C Address B Value</description>
          <addressOffset>0x144</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RW</name>
              <description>Read write value</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>ADDRESS</name>
              <description>Address value</description>
              <bitRange>[10:1]</bitRange>
            </field>
            <field>
              <name>ADDRESSBEN</name>
              <description>Enable Address B</description>
              <bitRange>[15:15]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>S0_ADDRESSMASKB</name>
          <description>Slave I2C Address B Mask value</description>
          <addressOffset>0x148</addressOffset>
          <resetValue>0x000007FE</resetValue>
          <fields>
            <field>
              <name>RWMASK</name>
              <description>Read write mask</description>
              <bitRange>[0:0]</bitRange>
            </field>
            <field>
              <name>MASK</name>
              <description>Address mask value</description>
              <bitRange>[10:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0x3FC</addressOffset>
          <access>read-only</access>
          <resetValue>0x021407E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="I2C0">
      <name>I2C1</name>
      <baseAddress>0x40016400</baseAddress>
    </peripheral>
    <peripheral derivedFrom="I2C0">
      <name>I2C2</name>
      <baseAddress>0x40016800</baseAddress>
    </peripheral>
    <peripheral>
      <name>CAN0</name>
      <version>1.0</version>
      <description>CAN Peripheral</description>
      <groupName>CAN</groupName>
      <headerStructName>CAN</headerStructName>
      <baseAddress>0x40014000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>CAN0</name>
        <value>72</value>
      </interrupt>
      <interrupt>
        <name>CAN1</name>
        <value>74</value>
      </interrupt>
      <registers>
        <register>
          <name>CNSTAT_CMB0</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB0</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB0</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB0</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB0</name>
          <description>CAN Frame Data Word 1</description>
          <addressOffset>0x10</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB0</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB0</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x18</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB0</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x1C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB1</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x20</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB1</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x24</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB1</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x28</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB1</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x2C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB1</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x30</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB1</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x34</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB1</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x38</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB1</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x3C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB2</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x40</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB2</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x44</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB2</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x48</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB2</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x4C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB2</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x50</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB2</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x54</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB2</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x58</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB2</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x5C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB3</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x60</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB3</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x64</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB3</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x68</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB3</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x6C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB3</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x70</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB3</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x74</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB3</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x78</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB3</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x7C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB4</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x80</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB4</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x84</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB4</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x88</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB4</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x8C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB4</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x90</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB4</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x94</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB4</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x98</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB4</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x9C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB5</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0xA0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB5</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0xA4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB5</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0xA8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB5</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xAC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB5</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xB0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB5</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0xB4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB5</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0xB8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB5</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0xBC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB6</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0xC0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB6</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0xC4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB6</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0xC8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB6</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xCC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB6</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xD0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB6</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0xD4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB6</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0xD8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB6</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0xDC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB7</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0xE0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB7</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0xE4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB7</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0xE8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB7</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xEC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB7</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0xF0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB7</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0xF4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB7</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0xF8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB7</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0xFC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB8</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x100</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB8</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x104</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB8</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x108</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB8</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB8</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x110</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB8</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB8</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x118</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB8</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x11C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB9</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x120</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB9</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x124</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB9</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x128</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB9</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x12C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB9</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x130</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB9</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x134</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB9</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x138</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB9</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x13C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB10</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x140</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB10</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x144</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB10</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x148</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB10</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB10</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x150</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB10</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x154</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB10</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x158</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB10</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x15C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB11</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x160</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB11</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x164</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB11</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x168</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB11</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x16C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB11</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x170</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB11</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x174</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB11</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x178</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB11</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x17C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB12</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x180</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB12</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x184</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB12</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x188</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB12</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x18C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB12</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x190</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB12</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x194</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB12</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x198</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB12</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x19C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB13</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x1A0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB13</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x1A4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB13</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x1A8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB13</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x1AC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB13</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x1B0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB13</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x1B4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB13</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x1B8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB13</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x1BC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_CMB14</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x1C0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_CMB14</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x1C4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_CMB14</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x1C8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_CMB14</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x1CC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_CMB14</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x1D0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_CMB14</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x1D4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_CMB14</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x1D8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_CMB14</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x1DC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CNSTAT_HCMB</name>
          <description>Buffer Status / Control Register</description>
          <addressOffset>0x1E0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DLC</name>
              <description>Data Length Code</description>
              <bitRange>[15:12]</bitRange>
            </field>
            <field>
              <name>PRI</name>
              <description>Transmit Priority Code</description>
              <bitRange>[7:4]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Buffer Status</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TSTP_HCMB</name>
          <description>CAN Frame Timestamp</description>
          <addressOffset>0x1E4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMESTAMP</name>
              <description>Timestamp</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA3_HCMB</name>
          <description>CAN Frame Data Word 3</description>
          <addressOffset>0x1E8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE7</name>
              <description>Data Byte 7</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE8</name>
              <description>Data Byte 8</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA2_HCMB</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x1EC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE5</name>
              <description>Data Byte 5</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE6</name>
              <description>Data Byte 6</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA1_HCMB</name>
          <description>CAN Frame Data Word 2</description>
          <addressOffset>0x1F0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE3</name>
              <description>Data Byte 3</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE4</name>
              <description>Data Byte 4</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DATA0_HCMB</name>
          <description>CAN Frame Data Word 0</description>
          <addressOffset>0x1F4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BYTE1</name>
              <description>Data Byte 1</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>BYTE2</name>
              <description>Data Byte 2</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID0_HCMB</name>
          <description>CAN Frame Identifier Word 0</description>
          <addressOffset>0x1F8</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID0</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ID1_HCMB</name>
          <description>CAN Frame Identifier Word 1</description>
          <addressOffset>0x1FC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ID1</name>
              <description>Half of CAN Frame ID.  Format Varies for Standard or Extended Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CGCR</name>
          <description>CAN Global Configuration Register</description>
          <addressOffset>0x200</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EIT</name>
              <description>Error Interrupt Type</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>DIAGEN</name>
              <description>Diagnostic Enable</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>INTERNAL</name>
              <description>Internal</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>LOOPBACK</name>
              <description>Loopback</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>IGNACK</name>
              <description>Ignore Acknowledge</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>LO</name>
              <description>Listen Only</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>DDIR</name>
              <description>Data Direction</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>TSTPEN</name>
              <description>Time Sync Enable</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>BUFFLOCK</name>
              <description>Buffer Lock</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>CTX</name>
              <description>RW,Control Transmit</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>CRX</name>
              <description>RW,Control Receive</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>CANEN</name>
              <description>CAN Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CTIM</name>
          <description>CAN Timing Register</description>
          <addressOffset>0x204</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PSC</name>
              <description>Prescaler Configuration</description>
              <bitRange>[15:9]</bitRange>
            </field>
            <field>
              <name>SJW</name>
              <description>Synchronization Jump Width</description>
              <bitRange>[8:7]</bitRange>
            </field>
            <field>
              <name>TSEG1</name>
              <description>Time Segment 1</description>
              <bitRange>[6:3]</bitRange>
            </field>
            <field>
              <name>TSEG2</name>
              <description>Time Segment 2</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>GMSKX</name>
          <description>CAN Global Mask Extension</description>
          <addressOffset>0x208</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GM</name>
              <description>GM[14:0] used when an extended frame is received. ID[14:0] in extended, unused standard</description>
              <bitRange>[15:1]</bitRange>
            </field>
            <field>
              <name>XRTR</name>
              <description>Extended Remote transmission Request Bit</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>GMSKB</name>
          <description>CAN Global Mask Base</description>
          <addressOffset>0x20C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GM1</name>
              <description>GM[28:18] - ID[10:0] in standard, ID[28:18] in extended</description>
              <bitRange>[15:5]</bitRange>
            </field>
            <field>
              <name>RTR</name>
              <description>Remote Transmission Request in Standard, Substitute Remote Request (SRR) in extended</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>IDE</name>
              <description>Identifier Extension Bit</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>GM0</name>
              <description>GM[17:15] - Unused in standard, ID[17:15] in extended</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>BMSKX</name>
          <description>CAN Basic Mask Extension</description>
          <addressOffset>0x210</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BM</name>
              <description>BM[14:0] used when an extended frame is received. ID[14:0] in extended, unused standard</description>
              <bitRange>[15:1]</bitRange>
            </field>
            <field>
              <name>XRTR</name>
              <description>Extended Remote transmission Request Bit</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>BMSKB</name>
          <description>CAN Basic Mask Base</description>
          <addressOffset>0x214</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BM1</name>
              <description>BM[28:18] - ID[10:0] in standard, ID[28:18] in extended</description>
              <bitRange>[15:5]</bitRange>
            </field>
            <field>
              <name>RTR</name>
              <description>Remote Transmission Request in Standard, Substitute Remote Request (SRR) in extended</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>IDE</name>
              <description>Identifier Extension Bit</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>BM0</name>
              <description>BM[17:15] - Unused in standard, ID[17:15] in extended</description>
              <bitRange>[2:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CIEN</name>
          <description>CAN Interrupt Enable Register</description>
          <addressOffset>0x218</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EIEN</name>
              <description>Error Interrupt Enable</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>IEN</name>
              <description>Buffer Interrupt Enable[14:0]</description>
              <bitRange>[14:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CIPND</name>
          <description>CAN Interrupt Pending Register</description>
          <addressOffset>0x21C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EIPND</name>
              <description>Error Interrupt Pending</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>IPND</name>
              <description>Buffer Interrupt Pending[14:0]</description>
              <bitRange>[14:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CICLR</name>
          <description>CAN Interrupt Clear Register</description>
          <addressOffset>0x220</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EICLR</name>
              <description>Error Interrupt Clear</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>ICLR</name>
              <description>Buffer Interrupt Clear[14:0]</description>
              <bitRange>[14:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CICEN</name>
          <description>CAN Interrupt Code Enable Register</description>
          <addressOffset>0x224</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EICEN</name>
              <description>Error Interrupt Code Enable</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>ICEN</name>
              <description>Buffer Interrupt Code Enable[14:0]</description>
              <bitRange>[14:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CSTPND</name>
          <description>CAN Status Pending Register</description>
          <addressOffset>0x228</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NS</name>
              <description>CAN Node Status</description>
              <bitRange>[7:5]</bitRange>
            </field>
            <field>
              <name>IRQ</name>
              <description>Interrupt Request portion of Interrupt Code</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>IST</name>
              <description>Interrupt Source portion of Interrupt Code</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CANEC</name>
          <description>CAN Error Counter Register</description>
          <addressOffset>0x22C</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REC</name>
              <description>Receive Error Counter</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>TEC</name>
              <description>Transmit Error Counter</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CEDIAG</name>
          <description>CAN Error Diagnostic Register</description>
          <addressOffset>0x230</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DRIVE</name>
              <description>Drive</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>MON</name>
              <description>Monitor</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>CRC</name>
              <description>CRC</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>STUFF</name>
              <description>Stuff Error</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXE</name>
              <description>Transmit Error</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>EBID</name>
              <description>Error Bit Identifier</description>
              <bitRange>[9:4]</bitRange>
            </field>
            <field>
              <name>EFID</name>
              <description>Error Field Identifier</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CTMR</name>
          <description>CAN Timer Register</description>
          <addressOffset>0x234</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CTMR</name>
              <description>Time Stamp Counter</description>
              <bitRange>[15:0]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="CAN0">
      <name>CAN1</name>
      <baseAddress>0x40014400</baseAddress>
    </peripheral>
    <peripheral>
      <name>ADC</name>
      <version>1.0</version>
      <description>Analog to Digital Converter Peripheral</description>
      <groupName>ADC</groupName>
      <headerStructName>ADC</headerStructName>
      <baseAddress>0x40022000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ADC</name>
        <value>44</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL</name>
          <description>Control Register</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CONV_CNT</name>
              <description>Conversion count describes the number of conversions to be applied for triggers/sweeps.  (N+1 conversions)</description>
              <bitRange>[23:20]</bitRange>
            </field>
            <field>
              <name>MANUAL_TRIG</name>
              <description>Starts analog acquisition</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>EXT_TRIG_EN</name>
              <description>Allows the external trigger to start analog acquisition</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>SWEEP_EN</name>
              <description>ADC data acquisition for all enabled channel</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>CHAN_TAG_EN</name>
              <description>Enables the channel tag to be saved with the ADC data</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>CHAN_EN</name>
              <description>Enables the channel for data collection</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>FIFO_DATA</name>
          <description>FIFO data</description>
          <addressOffset>0x4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHAN_TAG</name>
              <description>If enabled, this will include the number of the channel corresponding to the measurement</description>
              <bitRange>[15:12]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>ADC_DATA</name>
              <description>ADC acquisition data from the FIFO</description>
              <bitRange>[11:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status</description>
          <addressOffset>0x8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADC_BUSY</name>
              <description>Indicates an ADC data acquisition is in process</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>FIFO_ENTRY_CNT</name>
              <description>Indicates the number of entries in the FIFO</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>Interrupt Enable</description>
          <addressOffset>0xC</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFO_DEPTH_TRIG</name>
              <description>Enables the interrupt for the FIFO entry count meets or exceeds the trigger level</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TRIG_ERROR</name>
              <description>Enables the interrupt for a trigger error</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>ADC_DONE</name>
              <description>Enables the interrupt for an ADC data acquisition completion</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Enables the interrupt for a FIFO underflow</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Enables the interrupt for a FIFO overflow</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_FULL</name>
              <description>Enables the interrupt for FIFO full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_EMPTY</name>
              <description>Enables the interrupt for FIFO empty</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_RAW</name>
          <description>Raw Interrupt Status</description>
          <addressOffset>0x10</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>FIFO_DEPTH_TRIG</name>
              <description>Indicates the interrupt for the FIFO entry count meets or exceeds the trigger level</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TRIG_ERROR</name>
              <description>Indicates a manual or external trigger occurred when the ADC was BUSY doing a conversion</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>ADC_DONE</name>
              <description>Indicates that a ADC conversion is done</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Indicates data was unavailable when a new trigger for ADC update is received</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Indicates a FIFO overflow occurred (FIFO was full when new data was written)</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_FULL</name>
              <description>Indicates the FIFO is full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_EMPTY</name>
              <description>Indicates the FIFO is empty</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_END</name>
          <description>Enabled Interrupt Status</description>
          <addressOffset>0x14</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFO_DEPTH_TRIG</name>
              <description>Indicates the interrupt for the FIFO entry count meets or exceeds the trigger level</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TRIG_ERROR</name>
              <description>Indicates a manual or external trigger occurred when the ADC was BUSY doing a conversion and the interrupt is enabled</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>ADC_DONE</name>
              <description>Indicates that a ADC conversion is done and the interrupt is enabled</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Indicates a FIFO underflow occurred and the interrupt is enabled</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Indicates a FIFO overflow occurred and the interrupt is enabled</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_FULL</name>
              <description>Indicates the FIFO is full and the interrupt is enabled</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_EMPTY</name>
              <description>Indicates the FIFO is empty and the interrupt is enabled</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_CLR</name>
          <description>Clear Interrupt</description>
          <addressOffset>0x18</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRIG_ERROR</name>
              <description>Clears the trigger error interrupt status. Always reads 0</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>ADC_DONE</name>
              <description>Clears the ADC done interrupt status. Always reads 0</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Clears the FIFO underflow interrupt status. Always reads 0</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Clears the FIFO overflow interrupt status. Always reads 0</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXFIFOIRQTRG</name>
          <description>Receive FIFO Interrupt Trigger Value</description>
          <addressOffset>0x1C</addressOffset>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>LEVEL</name>
              <description>Sets the FIFO_ENTRY_CNT value that asserts the FIFO_DEPTH_TRIG interrupt</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>FIFO_CLR</name>
          <description>FIFO Clear</description>
          <addressOffset>0x20</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFO_CLR</name>
              <description>Clears the ADC FIFO. Always reads 0</description>
              <bitRange>[0:0]</bitRange>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x001907E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DAC0</name>
      <version>1.0</version>
      <description>Digital to Analog Converter Peripheral</description>
      <groupName>DAC</groupName>
      <headerStructName>DAC</headerStructName>
      <baseAddress>0x40023000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x800</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>DAC0</name>
        <value>40</value>
      </interrupt>
      <interrupt>
        <name>DAC1</name>
        <value>41</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL0</name>
          <description>Control Register 0</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MAN_TRIG_EN</name>
              <description>Enables manual trigger</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>EXT_TRIG_EN</name>
              <description>Enables external trigger</description>
              <bitRange>[10:10]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL1</name>
          <description>Control Register 1</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DAC_EN</name>
              <description>Enables the DAC analog block</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>DAC_SETTLING</name>
              <description>Sets the the amount of time in microseconds the control FSM waits for the DAC settling time</description>
              <bitRange>[7:5]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>FIFO_DATA</name>
          <description>FIFO data</description>
          <addressOffset>0x8</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data for FIFO write</description>
              <bitRange>[11:0]</bitRange>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status</description>
          <addressOffset>0xC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DAC_BUSY</name>
              <description>Indicates a DAC data acquisition is in process</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>FIFO_ENTRY_CNT</name>
              <description>Indicates the number of entries in the FIFO</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_ENB</name>
          <description>Interrupt Enable</description>
          <addressOffset>0x10</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFO_DEPTH_TRIG</name>
              <description>Enables the interrupt for the FIFO entry count is less than or equal to the trigger level</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TRIG_ERROR</name>
              <description>Enables the interrupt for a trigger error</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>DAC_DONE</name>
              <description>Enables the interrupt for a DAC data acquisition completion</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Enables the interrupt for a FIFO underflow</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Enables the interrupt for a FIFO overflow</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_FULL</name>
              <description>Enables the interrupt for FIFO full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_EMPTY</name>
              <description>Enables the interrupt for FIFO empty</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_RAW</name>
          <description>Raw Interrupt Status</description>
          <addressOffset>0x14</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000041</resetValue>
          <fields>
            <field>
              <name>FIFO_DEPTH_TRIG</name>
              <description>Indicates the FIFO entry count is less than or equal to the trigger level</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TRIG_ERROR</name>
              <description>Indicates a manual or external trigger occurred when the DAC was BUSY doing a conversion</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>DAC_DONE</name>
              <description>Indicates that a DAC conversion is done</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Indicates data was unavailable when a new trigger for DAC update is received</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Indicates a FIFO overflow occurred (FIFO was full when new data was written)</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_FULL</name>
              <description>Indicates the FIFO is full</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_EMPTY</name>
              <description>Indicates the FIFO is empty</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_END</name>
          <description>Enabled Interrupt Status</description>
          <addressOffset>0x18</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFO_DEPTH_TRIG</name>
              <description>Indicates the FIFO entry count is less than or equal to the trigger level and the interrupt is enabled</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TRIG_ERROR</name>
              <description>Indicates a manual or external trigger occurred when the DAC was BUSY doing a conversion and the interrupt is enabled</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>DAC_DONE</name>
              <description>Indicates that a DAC conversion is done and the interrupt is enabled</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Indicates a FIFO underflow occurred and the interrupt is enabled</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Indicates a FIFO overflow occurred and the interrupt is enabled</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_FULL</name>
              <description>Indicates the FIFO is full and the interrupt is enabled</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_EMPTY</name>
              <description>Indicates the FIFO is empty and the interrupt is enabled</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_CLR</name>
          <description>Clear Interrupt</description>
          <addressOffset>0x1C</addressOffset>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRIG_ERROR</name>
              <description>Clears the trigger error interrupt status. Always reads 0</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>DAC_DONE</name>
              <description>Clears the DAC done interrupt status. Always reads 0</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>FIFO_UFLOW</name>
              <description>Clears the FIFO underflow interrupt status. Always reads 0</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FIFO_OFLOW</name>
              <description>Clears the FIFO overflow interrupt status. Always reads 0</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXFIFOIRQTRG</name>
          <description>Receive FIFO Interrupt Trigger Value</description>
          <addressOffset>0x20</addressOffset>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>LEVEL</name>
              <description>Sets the FIFO_ENTRY_CNT value that asserts the FIFO_DEPTH_TRIG interrupt</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>FIFO_CLR</name>
          <description>FIFO Clear</description>
          <addressOffset>0x24</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFO_CLR</name>
              <description>Clears the DAC FIFO. Always reads 0</description>
              <bitRange>[0:0]</bitRange>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0x7FC</addressOffset>
          <access>read-only</access>
          <resetValue>0x002007E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="DAC0">
      <name>DAC1</name>
      <baseAddress>0x40023800</baseAddress>
    </peripheral>
    <peripheral>
      <name>SPW</name>
      <version>1.0</version>
      <description>SpaceWire Peripheral</description>
      <groupName>SPW</groupName>
      <headerStructName>SPW</headerStructName>
      <baseAddress>0x40003000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SpW</name>
        <value>38</value>
      </interrupt>
      <registers>
        <register>
          <name>CTRL</name>
          <description>Control Register</description>
          <addressOffset>0x0</addressOffset>
          <resetValue>0xA2010004</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Reads as 1 if the RMAP command handler is available</description>
              <bitRange>[31:31]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>RX</name>
              <description>Reads as 1 if unaligned writes are available for the receiver</description>
              <bitRange>[30:30]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>RC</name>
              <description>Reads as 1 if RMAP CRC is enabled in the core</description>
              <bitRange>[29:29]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>NCH</name>
              <description>Number of DMA Channels minus one</description>
              <bitRange>[28:27]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>PO</name>
              <description>The number of available SpaceWire ports minus one</description>
              <bitRange>[26:26]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>CC</name>
              <description>CCSDS/CCITT CRC-16</description>
              <bitRange>[25:25]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>ID</name>
              <description>Interrupt distribution available</description>
              <bitRange>[24:24]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>LE</name>
              <description>Loop-back Enable</description>
              <bitRange>[22:22]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Selects the active port when the no port force bit is zero</description>
              <bitRange>[21:21]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>NP</name>
              <description>Disable port force</description>
              <bitRange>[20:20]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>PNPA</name>
              <description>SpW Plug-and-Play Available</description>
              <bitRange>[19:18]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>RD</name>
              <description>If set only one RMAP buffer is used</description>
              <bitRange>[17:17]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>RE</name>
              <description>Enable RMAP command handler</description>
              <bitRange>[16:16]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>PE</name>
              <description>SpW Plug-and-Play Enable</description>
              <bitRange>[15:15]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>TL</name>
              <description>Transmitter Enable Lock Control</description>
              <bitRange>[13:13]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>TF</name>
              <description>Time-code Flag Filter</description>
              <bitRange>[12:12]</bitRange>
              <access>read-write</access>
            </field>
            <field>
              <name>TR</name>
              <description>Enable time-code receptions</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TT</name>
              <description>Enable time-code transmissions</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>LI</name>
              <description>Generate interrupt when link error occurs</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>TQ</name>
              <description>Generate interrupt when a valid time-code is received</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RS</name>
              <description>Make complete reset of the SpaceWire node. Self-clearing</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>PM</name>
              <description>Enable Promiscuous mode</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>TI</name>
              <description>The host can generate a tick by writing a one to this field</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>IE</name>
              <description>If set, an interrupt is generated when one or both of bit 8 to 9 is set and its corresponding event occurs</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>AS</name>
              <description>Automatically start the link when a NULL has been received</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>LS</name>
              <description>Start the link</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>LD</name>
              <description>Disable the SpaceWire CODEC</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>STS</name>
          <description>Status/Interrupt Source Register</description>
          <addressOffset>0x4</addressOffset>
          <resetValue>0x06400000</resetValue>
          <fields>
            <field>
              <name>NRXD</name>
              <description>Number of Receive Descriptors</description>
              <bitRange>[27:26]</bitRange>
            </field>
            <field>
              <name>NTXD</name>
              <description>Number of Transmit Descriptors</description>
              <bitRange>[25:24]</bitRange>
            </field>
            <field>
              <name>LS</name>
              <description>Link State</description>
              <bitRange>[23:21]</bitRange>
            </field>
            <field>
              <name>AP</name>
              <description>Active port</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>EE</name>
              <description>Set to one when a packet is received with an EOP after the first byte for a non-RMAP packet and after the second byte for a RMAP packet</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>IA</name>
              <description>Packet is received with an invalid destination address field</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>WE</name>
              <description>A synchronization problem has occurred when receiving NChars</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>PE</name>
              <description>Parity error has occurred</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>DE</name>
              <description>Disconnection error has occurred</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>ER</name>
              <description>Escape error has occurred</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>CE</name>
              <description>Credit has occurred</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TO</name>
              <description>A new time count value was received</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DEFADDR</name>
          <description>Node Address Register</description>
          <addressOffset>0x8</addressOffset>
          <access>read-write</access>
          <resetValue>0x000000FE</resetValue>
          <fields>
            <field>
              <name>DEFMASK</name>
              <description>8-bit default mask used for node identification on the SpaceWire network</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>DEFADDR</name>
              <description>8-bit node address used for node identification on the SpaceWire network</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CLKDIV</name>
          <description>Clock Divisor Register</description>
          <addressOffset>0xC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000909</resetValue>
          <fields>
            <field>
              <name>CLKDIVSTART</name>
              <description>8-bit Clock divisor value used for the clock-divider during startup</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>CLKDIVRUN</name>
              <description>8-bit Clock divisor value used for the clock-divider when the link-interface is in the run-state</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DKEY</name>
          <description>Destination Key</description>
          <addressOffset>0x10</addressOffset>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DESTKEY</name>
              <description>RMAP destination key</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TC</name>
          <description>Time Code Register</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIRQ_END</name>
              <description>The current value of the time control flags</description>
              <bitRange>[7:6]</bitRange>
            </field>
            <field>
              <name>TIMECNT</name>
              <description>The current value of the system time counter</description>
              <bitRange>[5:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TDR</name>
          <description>Timer and Disconnect Register</description>
          <addressOffset>0x18</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DISCONNECT</name>
              <description>Used to generate the 850 ns disconnect time period</description>
              <bitRange>[21:12]</bitRange>
            </field>
            <field>
              <name>TIMER64</name>
              <description>Used to generate the 6.4 and 12.8 us time periods</description>
              <bitRange>[11:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMACTRL0</name>
          <description>DMA Control Register</description>
          <addressOffset>0x20</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>INTNUM</name>
              <description>Interrupt number used for this channel</description>
              <bitRange>[31:26]</bitRange>
            </field>
            <field>
              <name>EP</name>
              <description>EEP Termination</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>TR</name>
              <description>Truncated</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>IE</name>
              <description>Interrupt code transmit enable on EEP</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>IT</name>
              <description>Interrupt code transmit enable on truncation</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>RP</name>
              <description>Receive Packet IRQ</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>TP</name>
              <description>Transmit Packet IRQ</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>TL</name>
              <description>Transmit Enable Lock</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>LE</name>
              <description>Disable transmitter when a link error occurs</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>SP</name>
              <description>Strip PID</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>SA</name>
              <description>Strip Address</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>EN</name>
              <description>Enable Address</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>NS</name>
              <description>If cleared, packets will be discarded when a packet is arriving and there are no active descriptors. If set, the GRSPW will wait for a descriptor to be activated</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>RD</name>
              <description>Indicates to the GRSPW that there are enabled descriptors in the descriptor table</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>RX</name>
              <description>Reception to the DMA channel is currently active</description>
              <bitRange>[10:10]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>AT</name>
              <description>Abort the currently transmitting packet and disable transmissions</description>
              <bitRange>[9:9]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>RA</name>
              <description>An error response was detected on the AHB bus - DMA receive</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>TA</name>
              <description>An error response was detected on the AHB bus - DMA transmit</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>PR</name>
              <description>Set each time a packet has been received</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>PS</name>
              <description>Set each time a packet has been sent</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>AI</name>
              <description>An interrupt will be generated each time an AHB error occurs when this DMA channel is accessing the bus</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RI</name>
              <description>An interrupt will be generated each time a packet has been received</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TI</name>
              <description>An interrupt will be generated each time a packet is transmitted</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>RE</name>
              <description>Packets are allowed to be received to this channel</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TE</name>
              <description>Write a one to this bit each time new descriptors are activated in the table</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMAMAXLEN0</name>
          <description>DMA RX Maximum Length Register</description>
          <addressOffset>0x24</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXMAXLEN</name>
              <description>Receiver packet maximum length in bytes</description>
              <bitRange>[24:2]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMATXDESC0</name>
          <description>DMA Transmitter Descriptor Table Address Register</description>
          <addressOffset>0x28</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DESCBASEADDR</name>
              <description>Sets the base address of the descriptor table</description>
              <bitRange>[31:10]</bitRange>
            </field>
            <field>
              <name>DESCSEL</name>
              <description>Offset into the descriptor table</description>
              <bitRange>[9:4]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMARXDESC0</name>
          <description>DMA Receiver Table Destination Register</description>
          <addressOffset>0x2C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DESCBASEADDR</name>
              <description>Sets the base address of the descriptor table</description>
              <bitRange>[31:10]</bitRange>
            </field>
            <field>
              <name>DESCSEL</name>
              <description>Offset into the descriptor table</description>
              <bitRange>[9:3]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMAADDR0</name>
          <description>DMA Receiver Table Address Register</description>
          <addressOffset>0x30</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MASK</name>
              <description>Mask</description>
              <bitRange>[15:8]</bitRange>
            </field>
            <field>
              <name>ADDR</name>
              <description>Address</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>IRQ_ROUTER</name>
      <version>1.0</version>
      <description>Interrupt Router Peripheral</description>
      <headerStructName>IRQ</headerStructName>
      <baseAddress>0x40002000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>U0</name>
        <value>0</value>
      </interrupt>
      <interrupt>
        <name>U1</name>
        <value>1</value>
      </interrupt>
      <interrupt>
        <name>U2</name>
        <value>2</value>
      </interrupt>
      <interrupt>
        <name>U3</name>
        <value>3</value>
      </interrupt>
      <interrupt>
        <name>U4</name>
        <value>4</value>
      </interrupt>
      <interrupt>
        <name>U5</name>
        <value>5</value>
      </interrupt>
      <interrupt>
        <name>U6</name>
        <value>6</value>
      </interrupt>
      <interrupt>
        <name>U7</name>
        <value>7</value>
      </interrupt>
      <interrupt>
        <name>U8</name>
        <value>8</value>
      </interrupt>
      <interrupt>
        <name>U9</name>
        <value>9</value>
      </interrupt>
      <interrupt>
        <name>U10</name>
        <value>10</value>
      </interrupt>
      <interrupt>
        <name>U11</name>
        <value>11</value>
      </interrupt>
      <interrupt>
        <name>U12</name>
        <value>12</value>
      </interrupt>
      <interrupt>
        <name>U13</name>
        <value>13</value>
      </interrupt>
      <interrupt>
        <name>U14</name>
        <value>14</value>
      </interrupt>
      <interrupt>
        <name>U15</name>
        <value>15</value>
      </interrupt>
      <interrupt>
        <name>U37</name>
        <value>37</value>
      </interrupt>
      <interrupt>
        <name>U39</name>
        <value>39</value>
      </interrupt>
      <interrupt>
        <name>U73</name>
        <value>73</value>
      </interrupt>
      <interrupt>
        <name>U75</name>
        <value>75</value>
      </interrupt>
      <interrupt>
        <name>FPU</name>
        <value>194</value>
      </interrupt>
      <interrupt>
        <name>TXEV</name>
        <value>195</value>
      </interrupt>
      <registers>
        <register>
          <name>DMASEL0</name>
          <description>Interrupt select for DMA channel 0</description>
          <addressOffset>0x0</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000007F</resetValue>
          <fields>
            <field>
              <name>DMASEL</name>
              <description>DMA trigger source selection value</description>
              <bitRange>[6:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMASEL1</name>
          <description>Interrupt select for DMA channel 1</description>
          <addressOffset>0x4</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000007F</resetValue>
          <fields>
            <field>
              <name>DMASEL</name>
              <description>DMA trigger source selection value</description>
              <bitRange>[6:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMASEL2</name>
          <description>Interrupt select for DMA channel 2</description>
          <addressOffset>0x8</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000007F</resetValue>
          <fields>
            <field>
              <name>DMASEL</name>
              <description>DMA trigger source selection value</description>
              <bitRange>[6:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMASEL3</name>
          <description>Interrupt select for DMA channel 3</description>
          <addressOffset>0xC</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000007F</resetValue>
          <fields>
            <field>
              <name>DMASEL</name>
              <description>DMA trigger source selection value</description>
              <bitRange>[6:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMATTSEL</name>
          <description>Trigger select for the DMA channels</description>
          <addressOffset>0x10</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DMATTSEL</name>
              <description>DMA trigger type selection value</description>
              <bitRange>[3:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ADCSEL</name>
          <description>Interrupt select for ADC</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000001F</resetValue>
          <fields>
            <field>
              <name>ADCSEL</name>
              <description>ADC trigger source selection value</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DACSEL0</name>
          <description>Interrupt select for DAC0</description>
          <addressOffset>0x18</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000001F</resetValue>
          <fields>
            <field>
              <name>DACSEL</name>
              <description>DAC trigger source selection value</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DACSEL1</name>
          <description>Interrupt select for DAC1</description>
          <addressOffset>0x1C</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000001F</resetValue>
          <fields>
            <field>
              <name>DACSEL</name>
              <description>DAC trigger source selection value</description>
              <bitRange>[4:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_OUT0</name>
          <description>DEBUG IRQ_OUT[31:0]</description>
          <addressOffset>0x20</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_OUT0</name>
              <description>IRQ_OUT[31:0]</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_OUT1</name>
          <description>DEBUG IRQ_OUT[63:32]</description>
          <addressOffset>0x24</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_OUT1</name>
              <description>IRQ_OUT[63:32]</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_OUT2</name>
          <description>DEBUG IRQ_OUT[95:64]</description>
          <addressOffset>0x28</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_OUT2</name>
              <description>IRQ_OUT[95:64]</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_OUT3</name>
          <description>DEBUG IRQ_OUT[127:96]</description>
          <addressOffset>0x2C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_OUT3</name>
              <description>IRQ_OUT[127:96]</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_OUT4</name>
          <description>DEBUG IRQ_OUT[159:128]</description>
          <addressOffset>0x30</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_OUT4</name>
              <description>IRQ_OUT[159:128]</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>IRQ_OUT5</name>
          <description>DEBUG IRQ_OUT[179:160]</description>
          <addressOffset>0x34</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQ_OUT5</name>
              <description>IRQ_OUT[179:160]</description>
              <bitRange>[19:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>PERID</name>
          <description>Peripheral ID Register</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x028107E9</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>WATCH_DOG</name>
      <version>1.0</version>
      <description>Watchdog Block Peripheral</description>
      <headerStructName>WDOG</headerStructName>
      <baseAddress>0x40021000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>WATCHDOG</name>
        <value>47</value>
      </interrupt>
      <registers>
        <register>
          <name>WDOGLOAD</name>
          <description>Counter Start Value</description>
          <addressOffset>0x0</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Count to load</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGVALUE</name>
          <description>Down Counter Value</description>
          <addressOffset>0x4</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Actual Count</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGCONTROL</name>
          <description>Enable for block reset and interrupt</description>
          <addressOffset>0x8</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RESEN</name>
              <description>Enable watchdog reset output</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>INTEN</name>
              <description>Enable watchdog interrupt</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGINTCLR</name>
          <description>A write of any value clears the WDT module interrupt, and reloads
the counter from the value in the WDOGLOAD Register</description>
          <addressOffset>0xC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLEAR</name>
              <description>Write any value to clear interrupt</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGRIS</name>
          <description>Raw interrupt status</description>
          <addressOffset>0x10</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>INTERRUPT</name>
              <description>Interrupt Status</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGMIS</name>
          <description>Interrupt status</description>
          <addressOffset>0x14</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>INTERRUPT</name>
              <description>Masked Interrupt Status</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGLOCK</name>
          <description>Lock</description>
          <addressOffset>0xC0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REG_WR_EN</name>
              <description>Register write enable status</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGITCR</name>
          <description>Integration test control</description>
          <addressOffset>0xF00</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TEST_MODE_EN</name>
              <description>Enable test mode of WDOGINT and WDOGRES</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGITOP</name>
          <description>Integration test output set</description>
          <addressOffset>0xF04</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WDOGINT</name>
              <description>Set output value</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>WDOGRES</name>
              <description>Set output value</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPERIPHID0</name>
          <description>Peripheral ID</description>
          <addressOffset>0xFE0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000024</resetValue>
          <fields>
            <field>
              <name>PERIPHID</name>
              <description>Peripheral ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPERIPHID1</name>
          <description>Peripheral ID</description>
          <addressOffset>0xFE4</addressOffset>
          <access>read-only</access>
          <resetValue>0x000000B8</resetValue>
          <fields>
            <field>
              <name>PERIPHID</name>
              <description>Peripheral ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPERIPHID2</name>
          <description>Peripheral ID</description>
          <addressOffset>0xFE8</addressOffset>
          <access>read-only</access>
          <resetValue>0x0000001B</resetValue>
          <fields>
            <field>
              <name>PERIPHID</name>
              <description>Peripheral ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPERIPHID3</name>
          <description>Peripheral ID</description>
          <addressOffset>0xFEC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PERIPHID</name>
              <description>Peripheral ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPCELLID0</name>
          <description>PrimeCell ID</description>
          <addressOffset>0xFF0</addressOffset>
          <access>read-only</access>
          <resetValue>0x0000000D</resetValue>
          <fields>
            <field>
              <name>PCELLID</name>
              <description>Prime Cell ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPCELLID1</name>
          <description>PrimeCell ID</description>
          <addressOffset>0xFF4</addressOffset>
          <access>read-only</access>
          <resetValue>0x000000F0</resetValue>
          <fields>
            <field>
              <name>PCELLID</name>
              <description>Prime Cell ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPCELLID2</name>
          <description>PrimeCell ID</description>
          <addressOffset>0xFF8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000005</resetValue>
          <fields>
            <field>
              <name>PCELLID</name>
              <description>Prime Cell ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>WDOGPCELLID3</name>
          <description>PrimeCell ID</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-only</access>
          <resetValue>0x000000B1</resetValue>
          <fields>
            <field>
              <name>PCELLID</name>
              <description>Prime Cell ID</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TRNG</name>
      <version>1.0</version>
      <description>True Random Number Generator</description>
      <headerStructName>TRNG</headerStructName>
      <baseAddress>0x40027000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x400</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TRNG</name>
        <value>42</value>
      </interrupt>
      <registers>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000000F</resetValue>
          <fields>
            <field>
              <name>VN_ERR_INT_MASK</name>
              <description>Mask the Von Neumann error</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>CRNGT_ERR_INT_MASK</name>
              <description>Mask the CRNGT error</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>AUTOCORR_ERR_INT_MASK</name>
              <description>Mask the Autocorrelation error</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>EHR_VALID_INT_MASK</name>
              <description>Mask when the TRNG has collected 192 bits</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x104</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VN_ERR</name>
              <description>Indicates a Von Neumann error</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>CRNGT_ERR</name>
              <description>Indicates a Continuous Random Number Generation Testing (CRNGT) error</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>AUTOCORR_ERR</name>
              <description>Indicates that the Autocorrelation test failed four times in a row</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>EHR_VALID</name>
              <description>192 bits have been collected in the TRNG</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>ICR</name>
          <description>Interrupt Clear Register</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VN_ERR</name>
              <description>Clears a Von Neumann error</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>CRNGT_ERR</name>
              <description>Clear a Continuous Random Number Generation Testing (CRNGT) error</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>AUTOCORR_ERR</name>
              <description>Software cannot clear this bit. Only a TRNG reset can clear this bit</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>EHR_VALID</name>
              <description>Set to 1 after the EHR_DATA[0,1,2,3,4,5] registers have been read</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration Register</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RND_SRC_SEL</name>
              <description>Selects the number of inverters (out of four possible selections) in the ring oscillator</description>
              <bitRange>[1:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>VALID</name>
          <description>Valid Register</description>
          <addressOffset>0x110</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EHR_VALID</name>
              <description>Indicates that the collection of bits in the TRNG is complete</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>EHR_DATA0</name>
          <description>Entropy Holding Register Data Register</description>
          <addressOffset>0x114</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EHR_DATA</name>
              <description>32 Bits of Entropy Holding Register</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="EHR_DATA0">
          <name>EHR_DATA1</name>
          <description>Entropy Holding Register Data Register</description>
          <addressOffset>0x118</addressOffset>
        </register>
        <register derivedFrom="EHR_DATA0">
          <name>EHR_DATA2</name>
          <description>Entropy Holding Register Data Register</description>
          <addressOffset>0x11C</addressOffset>
        </register>
        <register derivedFrom="EHR_DATA0">
          <name>EHR_DATA3</name>
          <description>Entropy Holding Register Data Register</description>
          <addressOffset>0x120</addressOffset>
        </register>
        <register derivedFrom="EHR_DATA0">
          <name>EHR_DATA4</name>
          <description>Entropy Holding Register Data Register</description>
          <addressOffset>0x124</addressOffset>
        </register>
        <register derivedFrom="EHR_DATA0">
          <name>EHR_DATA5</name>
          <description>Entropy Holding Register Data Register</description>
          <addressOffset>0x128</addressOffset>
        </register>
        <register>
          <name>RND_SOURCE_ENABLE</name>
          <description>Random Source Enable Register</description>
          <addressOffset>0x12C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RND_SRC_EN</name>
              <description>The entropy source, ring oscillator, is enabled</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLE_CNT1</name>
          <description>Section TBD</description>
          <addressOffset>0x130</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000FFFF</resetValue>
          <fields>
            <field>
              <name>SAMPLE_CNTR1</name>
              <description>Sets the number of clk cycles between two consecutive ring oscillator samples</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>AUTOCORR_STATISTIC</name>
          <description>Auto-correlator Statistic Register</description>
          <addressOffset>0x134</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>AUTOCORR_FAILS</name>
              <description>Count each time an autocorrelation test fails</description>
              <bitRange>[21:14]</bitRange>
            </field>
            <field>
              <name>AUTOCORR_TRYS</name>
              <description>Count each time an autocorrelation test starts</description>
              <bitRange>[13:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DEBUG_CONTROL</name>
          <description>Section TBD</description>
          <addressOffset>0x138</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>AUTO_CORRELATE_BYPASS</name>
              <description>The autocorrelation test in the TRNG module is bypassed</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>CRNGT_BYPASS</name>
              <description>The CRNGT test in the TRNG is bypassed</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>VNC_PYPASS</name>
              <description>The Von Neumann balancer is bypassed</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SW_RESET</name>
          <description>Reset Register</description>
          <addressOffset>0x140</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SW_RESET</name>
              <description>Writing 1 to this register causes an internal TRNG reset</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>BUSY</name>
          <description>Busy Register</description>
          <addressOffset>0x1B8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUSY</name>
              <description>Reflects the status of the rng_busy signal</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RST_BITS_COUNTER</name>
          <description>Reset Bits Counter Register</description>
          <addressOffset>0x1BC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RST_BITS_COUNTER</name>
              <description>Writing any value to this bit resets the bits counter and TRNG valid registers</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>BIST_CNTR0</name>
          <description>BIST Counter Register</description>
          <addressOffset>0x1E0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ROSC_CNTR_VAL</name>
              <description>Returns the results of the TRNG BIST counter</description>
              <bitRange>[21:0]</bitRange>
            </field>
          </fields>
        </register>
        <register derivedFrom="BIST_CNTR0">
          <name>BIST_CNTR1</name>
          <description>BIST Counter Register</description>
          <addressOffset>0x1E4</addressOffset>
        </register>
        <register derivedFrom="BIST_CNTR0">
          <name>BIST_CNTR2</name>
          <description>BIST Counter Register</description>
          <addressOffset>0x1E8</addressOffset>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>ETH</name>
      <version>1.1</version>
      <description>Ethernet Block</description>
      <headerStructName>ETH</headerStructName>
      <baseAddress>0x40004000</baseAddress>
      <addressBlock>
        <offset>0x0</offset>
        <size>0x2000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>Ethernet</name>
        <value>36</value>
      </interrupt>
      <registers>
        <register>
          <name>MAC_CONFIG</name>
          <description>Operation mode register for the MAC</description>
          <addressOffset>0x0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WD</name>
              <description>Watchdog disable</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>JD</name>
              <description>Jabber Disable</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>BE</name>
              <description>Frame Burst Enable</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>JE</name>
              <description>Jumbo Frame Enable</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>IFG</name>
              <description>Inter-Frame Gap</description>
              <bitRange>[19:17]</bitRange>
            </field>
            <field>
              <name>DCRS</name>
              <description>Disable Carrier Sense During Transmission</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>PS</name>
              <description>Port Select</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>FES</name>
              <description>Speed</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>DRO</name>
              <description>Disable Receive Own</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>LM</name>
              <description>Loopback Mode</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>DM</name>
              <description>Duplex Mode</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>IPC</name>
              <description>Checksum Offload</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>DR</name>
              <description>Disable Retry</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>ACS</name>
              <description>Automatic Pad, or CRC Stripping</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>BL</name>
              <description>Back-Off-Limit</description>
              <bitRange>[6:5]</bitRange>
            </field>
            <field>
              <name>DC</name>
              <description>Deferral Check</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>TE</name>
              <description>Transmitter Enable</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RE</name>
              <description>Receiver Enable</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>PRELEN</name>
              <description>Preamble Length for Transmit frames</description>
              <bitRange>[1:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_FRAME_FLTR</name>
          <description>Contains the frame filtering controls</description>
          <addressOffset>0x4</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Receive All</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>DNTU</name>
              <description>Drop non TCP/UDP over IP Frames</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>VFTE</name>
              <description>VLAN Tag Filter Enable</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>HDF</name>
              <description>Hash or Perfect Filter</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>SAF</name>
              <description>Source Address Filter Enable</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>SAIF</name>
              <description>SA Inverse Filtering</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>PCF</name>
              <description>Pass Control Frames</description>
              <bitRange>[7:6]</bitRange>
            </field>
            <field>
              <name>DBF</name>
              <description>Disable Broadcast Frames</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>PM</name>
              <description>Pass All Multicast</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>DAIF</name>
              <description>DA Inverse Filtering</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>HMC</name>
              <description>Hash Multicast</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>HUC</name>
              <description>Hash Unicast</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>PR</name>
              <description>Promiscuous Mode</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_GMII_ADDR</name>
          <description>Controls the management cycles to an external PHY</description>
          <addressOffset>0x10</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PA</name>
              <description>Physical Layer Address</description>
              <bitRange>[15:11]</bitRange>
            </field>
            <field>
              <name>GR</name>
              <description>GMII Register</description>
              <bitRange>[10:6]</bitRange>
            </field>
            <field>
              <name>CR</name>
              <description>CSR Clock Range</description>
              <bitRange>[5:2]</bitRange>
            </field>
            <field>
              <name>GW</name>
              <description>GMII Write/Read</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>GB</name>
              <description>GMII Busy</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_GMII_DATA</name>
          <description>Contains the data to be written to or read from the PHY register</description>
          <addressOffset>0x14</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GD</name>
              <description>GMII Data</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_FLOW_CTRL</name>
          <description>Controls the generation of control frames</description>
          <addressOffset>0x18</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PT</name>
              <description>Pause time</description>
              <bitRange>[31:16]</bitRange>
            </field>
            <field>
              <name>DZPQ</name>
              <description>Disable Zero-Quanta Pause</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>PLT</name>
              <description>Pause Low Threshold</description>
              <bitRange>[5:4]</bitRange>
            </field>
            <field>
              <name>UP</name>
              <description>Unicast Pause Frame Detect</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RFE</name>
              <description>Receive Flow Control Enable</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TFE</name>
              <description>Transmit Flow Control Enable</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>FCB_BPA</name>
              <description>Flow Control Busy or Backpressure Activate</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_VLAN_TAG</name>
          <description>Identifies IEEE 802.1Q VLAN type frames</description>
          <addressOffset>0x1C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ESVL</name>
              <description>Enable S-VLAN</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>VTIM</name>
              <description>VLAN Tag Inverse Match Enable</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>ETV</name>
              <description>Enable 12-Bit VLAN Tag Comparison</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>VL</name>
              <description>VLAN Tag identifier for Receive Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_DEBUG</name>
          <description>Gives the status of the various internal blocks for debugging</description>
          <addressOffset>0x24</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXSTSFSTS</name>
              <description>MTL TxStatus FIFO Full Status</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>TXFSTS</name>
              <description>MTL Tx FIFO Not Empty Status</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>TWCSTS</name>
              <description>MTL Tx FIFO Write Controller Status</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>TRCSTS</name>
              <description>MTL Tx FIFO Read Controller Status</description>
              <bitRange>[21:20]</bitRange>
            </field>
            <field>
              <name>TXPAUSED</name>
              <description>MAC Transmitter in Pause</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>TFCSTS</name>
              <description>PAC Transmit Frame Controller Status</description>
              <bitRange>[18:17]</bitRange>
            </field>
            <field>
              <name>TPESTS</name>
              <description>MAC GMII or MII Transmit Protocol Engine Status</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>RXFSTS</name>
              <description>MTL RxFIFO Fill-Level Status</description>
              <bitRange>[9:8]</bitRange>
            </field>
            <field>
              <name>RRCSTS</name>
              <description>MTL RxFIFO Read Controller State</description>
              <bitRange>[6:5]</bitRange>
            </field>
            <field>
              <name>RWCSTS</name>
              <description>MTL Rx FIFO Write Controller Active Status</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RFCFCSTS</name>
              <description>MAC Receive Frame FIFO Controller Status</description>
              <bitRange>[2:1]</bitRange>
            </field>
            <field>
              <name>RPESTS</name>
              <description>MAC GMII or MII Receive Protocol Engine Status</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_INTR_STAT</name>
          <description>Contains the interrupt status</description>
          <addressOffset>0x38</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSIS</name>
              <description>Timestamp Interrupt Status</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>MMCRXIPIS</name>
              <description>MMC Receive Checksum Offload Interrupt Status</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>MMCTXIS</name>
              <description>MMC Transmit Interrupt Status</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>MMCRXIS</name>
              <description>MMC Receive Interrupt Status</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>MMCIS</name>
              <description>MMC Interrupt Status</description>
              <bitRange>[4:4]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_INTR_MASK</name>
          <description>Contains the masks for generating interrupt</description>
          <addressOffset>0x3C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSIM</name>
              <description>Timestamp Interrupt Mask</description>
              <bitRange>[9:9]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_ADDR_H</name>
          <description>Contains the high 16-bits of the first MAC Address</description>
          <addressOffset>0x40</addressOffset>
          <access>read-write</access>
          <resetValue>0x8000FFFF</resetValue>
          <fields>
            <field>
              <name>AE</name>
              <description>Address Enable, This bit is always set to 1</description>
              <bitRange>[31:31]</bitRange>
              <access>read-only</access>
            </field>
            <field>
              <name>ADDRHI</name>
              <description>MAC Address0[47:32]</description>
              <bitRange>[15:0]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_ADDR_L</name>
          <description>Contains the Low 32-bits of the first MAC Address</description>
          <addressOffset>0x44</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>ADDRLO</name>
              <description>MAC Address0[31:0]</description>
              <bitRange>[31:0]</bitRange>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAC_WDOG_TO</name>
          <description>Controls the watchdog time-out for received frames</description>
          <addressOffset>0xDC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PWE</name>
              <description>Programmable Watchdog Enable</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>WTO</name>
              <description>Watchdog Timeout</description>
              <bitRange>[13:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MMC_CNTRL</name>
          <description>MMC Control Register</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UCDBC</name>
              <description>Update MMC Counters for Dropped Broadcast Frames</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>CNTPRSTLVL</name>
              <description>Full-Half Preset</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>CNTPRST</name>
              <description>Counters Preset</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>CNTFREEZ</name>
              <description>MMC Counter Freeze</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RSTONRD</name>
              <description>Reset on Read</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>CNTSTOPRO</name>
              <description>Counter Stop Rollover</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>CNTRST</name>
              <description>Counters Reset</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MMC_INTR_RX</name>
          <description>MMC Receive Interrupt Register</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTRLFIS</name>
              <description>MMC Receive Control Frame Counter Interrupt Status</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>RXRCVERRFIS</name>
              <description>MMC Receive Error Frame Counter Interrupt Status</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>RXWDOGFIS</name>
              <description>MMC Receive Watchdog Error Frame Counter Interrupt Status</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>RXVLANGBFIS</name>
              <description>MMC Receive VLAN Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>RXFOVFIS</name>
              <description>MMC Receive FIFO Overflow Frame Counter Interrupt Status</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>RXPAUSFIS</name>
              <description>MMC Receive Pause Frame Counter Interrupt Status</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>RXORANGEFIS</name>
              <description>MMC Receive Out Of Range Error Frame Counter Interrupt Status.</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>RXLENERFIS</name>
              <description>MMC Receive Length Error Frame Counter Interrupt Status</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>RXUCGFIS</name>
              <description>MMC Receive Unicast Good Frame Counter Interrupt Status</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>RX1024TMAXOCTGBFIS</name>
              <description>MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status.</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>RX512T1023OCTGBFIS</name>
              <description>MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>RX256T511OCTGBFIS</name>
              <description>MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>RX128T255OCTGBFIS</name>
              <description>MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>RX65T127OCTGBFIS</name>
              <description>MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>RX64OCTGBFIS</name>
              <description>MMC Receive 64 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>RXOSIZEGFIS</name>
              <description>MMC Receive Oversize Good Frame Counter Interrupt Status</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>RXUSIZEGFIS</name>
              <description>MMC Receive Undersize Good Frame Counter Interrupt Status</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RXJABERFIS</name>
              <description>MMC Receive Jabber Error Frame Counter Interrupt Status</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RXRUNTFIS</name>
              <description>MMC Receive Runt Frame Counter Interrupt Status</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>RXALGNERFIS</name>
              <description>MMC Receive Alignment Error Frame Counter Interrupt Status</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>RXCRCERFIS</name>
              <description>MMC Receive CRC Error Frame Counter Interrupt Status</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>RXMCGFIS</name>
              <description>MMC Receive Multicast Good Frame Counter Interrupt Status</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RXBCGFIS</name>
              <description>MMC Receive Broadcast Good Frame Counter Interrupt Status</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXGOCTIS</name>
              <description>MMC Receive Good Octet Counter Interrupt Status</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>RXGBOCTIS</name>
              <description>MMC Receive Good Bad Octet Counter Interrupt Status</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>RXGBFRMIS</name>
              <description>MMC Receive Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MMC_INTR_TX</name>
          <description>MMC Transmit Interrupt Register</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXOSIZEGFIS</name>
              <description>MMC Transmit Oversize Good Frame Counter Interrupt Status</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>TXVLANGFIS</name>
              <description>MMC Transmit VLAN Good Frame Counter Interrupt Status</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>TXPAUSFIS</name>
              <description>MMC Transmit Pause Frame Counter Interrupt Status</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>TXEXDEFFIS</name>
              <description>MMC Transmit Excessive Deferral Frame Counter Interrupt Status</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>TXGFRMIS</name>
              <description>MMC Transmit Good Frame Counter Interrupt Status</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>TXGOCTIS</name>
              <description>MMC Transmit Good Octet Counter Interrupt Status</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>TXCARERFIS</name>
              <description>MMC Transmit Carrier Error Frame Counter Interrupt Status</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>TXEXCOLFIS</name>
              <description>MMC Transmit Excessive Collision Frame Counter Interrupt Status</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>TXLATCOLFIS</name>
              <description>MMC Transmit Late Collision Frame Counter Interrupt Status</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>TXDEFFIS</name>
              <description>MMC Transmit Deferred Frame Counter Interrupt Status</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>TXMCOLGFIS</name>
              <description>MMC Transmit Multiple Collision Good Frame Counter Interrupt Status</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>TXSCOLGFIS</name>
              <description>MMC Transmit Single Collision Good Frame Counter Interrupt Status</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>TXUFLOWERFIS</name>
              <description>MMC Transmit Underflow Error Frame Counter Interrupt Status</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TXBCGBFIS</name>
              <description>MMC Transmit Broadcast Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>TXMCGBFIS</name>
              <description>MMC Transmit Multicast Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXUCGBFIS</name>
              <description>MMC Transmit Unicast Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>TX1024TMAXOCTGBFIS</name>
              <description>MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>TX512T1023OCTGBFIS</name>
              <description>MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>TX256T511OCTGBFIS</name>
              <description>MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>TX128T255OCTGBFIS</name>
              <description>MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TX65T127OCTGBFIS</name>
              <description>MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>TX64OCTGBFIS</name>
              <description>MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>TXMCGFIS</name>
              <description>MMC Transmit Multicast Good Frame Counter Interrupt Status</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TXBCGFIS</name>
              <description>MMC Transmit Broadcast Good Frame Counter Interrupt Status</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXGBFRMIS</name>
              <description>MMC Transmit Good Bad Frame Counter Interrupt Status</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TXGBOCTIS</name>
              <description>MMC Transmit Good Bad Octet Counter Interrupt Status</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MMC_INTR_MASK_RX</name>
          <description>MMC Receive Interrupt Mask Register</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTRLFIM</name>
              <description>MMC Receive Control Frame Counter Interrupt Mask</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>RXRCVERRFIM</name>
              <description>MMC Receive Error Frame Counter Interrupt Mask</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>RXWDOGFIM</name>
              <description>MMC Receive Watchdog Error Frame Counter Interrupt Mask</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>RXVLANGBFIM</name>
              <description>MMC Receive VLAN Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>RXFOVFIM</name>
              <description>MMC Receive FIFO Overflow Frame Counter Interrupt Mask</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>RXPAUSFIM</name>
              <description>MMC Receive Pause Frame Counter Interrupt Mask</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>RXORANGEFIM</name>
              <description>MMC Receive Out Of Range Error Frame Counter Interrupt Mask</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>RXLENERFIM</name>
              <description>MMC Receive Length Error Frame Counter Interrupt Mask</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>RXUCGFIM</name>
              <description>MMC Receive Unicast Good Frame Counter Interrupt Mask</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>RX1024TMAXOCTGBFIM</name>
              <description>MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask.</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>RX512T1023OCTGBFIM</name>
              <description>MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>RX256T511OCTGBFIM</name>
              <description>MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>RX128T255OCTGBFIM</name>
              <description>MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>RX65T127OCTGBFIM</name>
              <description>MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>RX64OCTGBFIM</name>
              <description>MMC Receive 64 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>RXOSIZEGFIM</name>
              <description>MMC Receive Oversize Good Frame Counter Interrupt Mask</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>RXUSIZEGFIM</name>
              <description>MMC Receive Undersize Good Frame Counter Interrupt Mask</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RXJABERFIM</name>
              <description>MMC Receive Jabber Error Frame Counter Interrupt Mask</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RXRUNTFIM</name>
              <description>MMC Receive Runt Frame Counter Interrupt Mask</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>RXALGNERFIM</name>
              <description>MMC Receive Alignment Error Frame Counter Interrupt Mask</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>RXCRCERFIM</name>
              <description>MMC Receive CRC Error Frame Counter Interrupt Mask</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>RXMCGFIM</name>
              <description>MMC Receive Multicast Good Frame Counter Interrupt Mask</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>RXBCGFIM</name>
              <description>MMC Receive Broadcast Good Frame Counter Interrupt Mask</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>RXGOCTIM</name>
              <description>MMC Receive Good Octet Counter Interrupt Mask</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>RXGBOCTIM</name>
              <description>MMC Receive Good Bad Octet Counter Interrupt Mask.</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>RXGBFRMIM</name>
              <description>MMC Receive Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>MMC_INTR_MASK_TX</name>
          <description>MMC Transmit Interrupt Mask Register</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXOSIZEGFIM</name>
              <description>MMC Transmit Oversize Good Frame Counter Interrupt Mask</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>TXVLANGFIM</name>
              <description>MMC Transmit VLAN Good Frame Counter Interrupt Mask</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>TXPAUSFIM</name>
              <description>MMC Transmit Pause Frame Counter Interrupt Mask</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>TXEXDEFFIM</name>
              <description>MMC Transmit Excessive Deferral Frame Counter Interrupt Mask</description>
              <bitRange>[22:22]</bitRange>
            </field>
            <field>
              <name>TXGFRMIM</name>
              <description>MMC Transmit Good Frame Counter Interrupt Mask</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>TXGOCTIM</name>
              <description>MMC Transmit Good Octet Counter Interrupt Mask</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>TXCARERFIM</name>
              <description>MMC Transmit Carrier Error Frame Counter Interrupt Mask</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>TXEXCOLFIM</name>
              <description>MMC Transmit Excessive Collision Frame Counter Interrupt Mask</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>TXLATCOLFIM</name>
              <description>MMC Transmit Late Collision Frame Counter Interrupt Mask</description>
              <bitRange>[17:17]</bitRange>
            </field>
            <field>
              <name>TXDEFFIM</name>
              <description>MMC Transmit Deferred Frame Counter Interrupt Mask</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>TXMCOLGFIM</name>
              <description>MMC Transmit Multiple Collision Good Frame Counter Interrupt Mask</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>TXSCOLGFIM</name>
              <description>MMC Transmit Single Collision Good Frame Counter Interrupt Mask</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>TXUFLOWERFIM</name>
              <description>MMC Transmit Underflow Error Frame Counter Interrupt Mask</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TXBCGBFIM</name>
              <description>MMC Transmit Broadcast Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>TXMCGBFIM</name>
              <description>MMC Transmit Multicast Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TXUCGBFIM</name>
              <description>MMC Transmit Unicast Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>TX1024TMAXOCTGBFIM</name>
              <description>MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>TX512T1023OCTGBFIM</name>
              <description>MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>TX256T511OCTGBFIM</name>
              <description>MC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>TX128T255OCTGBFIM</name>
              <description>MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>TX65T127OCTGBFIM</name>
              <description>MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>TX64OCTGBFIM</name>
              <description>MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>TXMCGFIM</name>
              <description>MMC Transmit Multicast Good Frame Counter Interrupt Mask</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TXBCGFIM</name>
              <description>MMC Transmit Broadcast Good Frame Counter Interrupt Mask</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TXGBFRMIM</name>
              <description>MMC Transmit Good Bad Frame Counter Interrupt Mask</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TXGBOCTIM</name>
              <description>MMC Transmit Good Bad Octet Counter Interrupt Mask</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXOCTETCOUNT_GB</name>
          <description>MMC Transmit Count</description>
          <addressOffset>0x114</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of bytes</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXFRAMECOUNT_GB</name>
          <description>MMC Frame Count Register</description>
          <addressOffset>0x118</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXBCASTFRAMES_G</name>
          <description>MMC Good Broadcast Frames Register</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXMCASTFRAMES_G</name>
          <description>MMC Good Multicast Frames Register</description>
          <addressOffset>0x120</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TX64OCT_GB</name>
          <description>MMC Good and bad Frames transmitted with length 64</description>
          <addressOffset>0x124</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TX65TO127OCT_GB</name>
          <description>MMC Good and bad Frames transmitted with length 65 to 127</description>
          <addressOffset>0x128</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TX128TO255OCT_GB</name>
          <description>MMC Good and bad Frames transmitted with length 128 to 255</description>
          <addressOffset>0x12C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TX256TO511OCT_GB</name>
          <description>MMC Good and bad Frames transmitted with length 256 to 511</description>
          <addressOffset>0x130</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TX512TO1023OCT_GB</name>
          <description>MMC Good and bad Frames transmitted with length 512 to 1023</description>
          <addressOffset>0x134</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TX1024MAXOCT_GB</name>
          <description>MMC Good and bad Frames transmitted with length 1024 to max bytes</description>
          <addressOffset>0x138</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXUCASTFRAME_GB</name>
          <description>MMC number of good and bad unicast frames transmitted</description>
          <addressOffset>0x13C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXMCASTFRAME_GB</name>
          <description>MMC number of good and bad MULTIcast frames transmitted</description>
          <addressOffset>0x140</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXBCASTFRAME_GB</name>
          <description>MMC number of good and bad broadcast frames transmitted</description>
          <addressOffset>0x144</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXUNDERERR</name>
          <description>MMC number of frames aborted because of frame underflow error</description>
          <addressOffset>0x148</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXSINGLECOL_G</name>
          <description>MMC Number of successfully transmitted frames after a single collision</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXMULTICOL_G</name>
          <description>MMC Number of successfully transmitted frames after multiple collisions</description>
          <addressOffset>0x150</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXDEFERRED</name>
          <description>MMC Number of successfully transmitted frames after a deferral</description>
          <addressOffset>0x154</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXLATECOL</name>
          <description>MMC Number of aborted frames because of late collision error</description>
          <addressOffset>0x158</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXEXESSCOL</name>
          <description>MMC Number of aborted frames because of excessive collision errors</description>
          <addressOffset>0x15C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXCARRIERERROR</name>
          <description>MMC Number of aborted frames because of carrier sense error</description>
          <addressOffset>0x160</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXOCTETCOUNT_G</name>
          <description>MMC Number of bytes transmitted frames only in good frames</description>
          <addressOffset>0x164</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of bytes</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXFRAMECOUNT_G</name>
          <description>MMC Number of good frames transmitted</description>
          <addressOffset>0x168</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXEXCESSDEF</name>
          <description>MMC Number of frames aborted because of excessive deferral error</description>
          <addressOffset>0x16C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXPAUSEFRAMES</name>
          <description>MMC Number of good pause frames transmitted</description>
          <addressOffset>0x170</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXLANFRAMES_G</name>
          <description>MMC Number of good VLAN frames transmitted</description>
          <addressOffset>0x174</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TXOVERSIZE_G</name>
          <description>MMC Number of frames transmitted without errors</description>
          <addressOffset>0x178</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXFRAMECOUNT_GB</name>
          <description>MMC Number of good and bad frames received</description>
          <addressOffset>0x180</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXOCTETCOUNT_GB</name>
          <description>MMC Number of bytes received in good and bad frames</description>
          <addressOffset>0x184</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of bytes</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXOCTETCOUNT_G</name>
          <description>MMC Number of bytes received in good frames only</description>
          <addressOffset>0x188</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of bytes</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXBCASTFRAMES_G</name>
          <description>MMC Number of good broadcast frames received</description>
          <addressOffset>0x18C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXMCASTFRAMES_G</name>
          <description>MMC Number of good multicast frames received</description>
          <addressOffset>0x190</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXCRCERROR</name>
          <description>MMC Number of frames received with CRC error</description>
          <addressOffset>0x194</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXALIGNERROR</name>
          <description>MMC Number of frames received with alignment error</description>
          <addressOffset>0x198</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXRUNTERROR</name>
          <description>MMC Number of frames received with runt error</description>
          <addressOffset>0x19C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXJABBERERROR</name>
          <description>MMC Number of giant frames received with length greater than 1518 bytes and with CRC error</description>
          <addressOffset>0x1A0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXUNDERSIZE_G</name>
          <description>MMC Number of frames received with length less than 64 bytes</description>
          <addressOffset>0x1A4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXOVERSIZE_G</name>
          <description>MMC Number of frames received without errors with length greater than the max size</description>
          <addressOffset>0x1A8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RX64OCTETS_GB</name>
          <description>MMC Number of good and bad frames received with length 64 bytes</description>
          <addressOffset>0x1AC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RX65TO127OCT_GB</name>
          <description>MMC Number of good and bad frames received with length between 65 and 127 bytes</description>
          <addressOffset>0x1B0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RX128TO255OCT_GB</name>
          <description>MMC Number of good and bad frames received with length between 128 and 255 bytes</description>
          <addressOffset>0x1B4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RX256TO511OCT_GB</name>
          <description>MMC Number of good and bad frames received with length between 256 and 511 bytes</description>
          <addressOffset>0x1B8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RX512TO1023OCT_GB</name>
          <description>MMC Number of good and bad frames received with length between 512 and 1023 bytes</description>
          <addressOffset>0x1BC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RX1024MAXOCT_GB</name>
          <description>MMC Number of good and bad frames received with length between 1024 and max size bytes</description>
          <addressOffset>0x1C0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXUCASTFRAMES_G</name>
          <description>MMC Number of received good unicast frames</description>
          <addressOffset>0x1C4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXLENGTHERROR</name>
          <description>MMC Number of frames received with length error</description>
          <addressOffset>0x1C8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXOUTRANGETYPE</name>
          <description>MMC Number of frames received with length field not equal to the valid frame size</description>
          <addressOffset>0x1CC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXPAUSEFRAMES</name>
          <description>MMC Number of good and valid Pause frames received</description>
          <addressOffset>0x1D0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXFIFOOVERFLOW</name>
          <description>MMC Number of missed received frames because of FIFO overflow</description>
          <addressOffset>0x1D4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXVLANFRAMES_GB</name>
          <description>MMC Number of good and bad VLAN frames received</description>
          <addressOffset>0x1D8</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXWDOGERROR</name>
          <description>MMC Number of frames received with error because of watchdog timeout error</description>
          <addressOffset>0x1DC</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXRCVERROR</name>
          <description>MMC Number of frames received with Receive error or Frame Extension error</description>
          <addressOffset>0x1E0</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>RXCTRLFRAMES_G</name>
          <description>MMC Number of received good control frames</description>
          <addressOffset>0x1E4</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>Number of frames</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>VLAN_INCREPLACE</name>
          <description>Holds the VLAN Tag for insertion into or replacement in the transmit frames</description>
          <addressOffset>0x584</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CSVL</name>
              <description>C-VLAN or S-VLAN</description>
              <bitRange>[19:19]</bitRange>
            </field>
            <field>
              <name>VLP</name>
              <description>VLAN Priority Control</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>VLC</name>
              <description>VLAN Tag Control in Transmit Frames</description>
              <bitRange>[17:16]</bitRange>
            </field>
            <field>
              <name>VLT</name>
              <description>VLAN Tag for Transmit Frames</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>VLAN_HASHTABLE</name>
          <description>Holds the VLAN Hash Table</description>
          <addressOffset>0x588</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VLHT</name>
              <description>VLAN Hash Table</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMESTAMP_CTRL</name>
          <description>Controls the IEEE 1588 timestamp generation and update logic</description>
          <addressOffset>0x700</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ATSEN3</name>
              <description>Auxiliary Snapshot 3 Enable</description>
              <bitRange>[28:28]</bitRange>
            </field>
            <field>
              <name>ATSEN2</name>
              <description>Auxiliary Snapshot 2 Enable</description>
              <bitRange>[27:27]</bitRange>
            </field>
            <field>
              <name>ATSEN1</name>
              <description>Auxiliary Snapshot 1 Enable</description>
              <bitRange>[26:26]</bitRange>
            </field>
            <field>
              <name>ATSEN0</name>
              <description>Auxiliary Snapshot 0 Enable</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>ATSFC</name>
              <description>Auxiliary Snapshot FIFO Clear</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>TSENMACADDR</name>
              <description>Enable MAC address for PTP Frame Filtering</description>
              <bitRange>[18:18]</bitRange>
            </field>
            <field>
              <name>SNAPTYPSEL</name>
              <description>Select PTP packets for Taking Snapshots</description>
              <bitRange>[17:16]</bitRange>
            </field>
            <field>
              <name>TSMSTRENA</name>
              <description>Enable Snapshot for Messages Relevant to Master</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>TSEVNTENA</name>
              <description>Enable Timestamp Snapshot for Event Messages</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>TSIPV4ENA</name>
              <description>Enable Processing of PTP Frames Sent over IPv4-UDP</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>TSIPV6ENA</name>
              <description>Enable Processing of PTP Frames Sent over IPv6-UDP</description>
              <bitRange>[12:12]</bitRange>
            </field>
            <field>
              <name>TSIPENA</name>
              <description>Enable Processing of PTP over Ethernet Frames</description>
              <bitRange>[11:11]</bitRange>
            </field>
            <field>
              <name>TSVER2ENA</name>
              <description>Enable PTP packet Processing for Version 2 Format</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>TSCTRLSSR</name>
              <description>Timestamp Digital or Binary Rollover Control</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>TSENALL</name>
              <description>Enable Timestamp for All Frames</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>TSADDRREG</name>
              <description>Addend Reg Update</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>TSTRIG</name>
              <description>Timestamp Interrupt Trigger Enable</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>TSUPDT</name>
              <description>Timestamp Update</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TSINIT</name>
              <description>Timestamp Initialize</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TSCFUPDT</name>
              <description>Timestamp Fine or Coarse Update</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TSENA</name>
              <description>Timestamp Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SUBSEC_INC</name>
          <description>Holds the 8-bit value by which the Sub-Second register is incremented</description>
          <addressOffset>0x704</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SSINC</name>
              <description>Sub-Second Increment Valuee</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYSTIME_SECONDS</name>
          <description>Holds the lower 32 bits of the second field of the system time</description>
          <addressOffset>0x708</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSS</name>
              <description>Timestamp Second</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYSTIME_NANOSEC</name>
          <description>Holds 32 bits of the nano-second field of the system time</description>
          <addressOffset>0x70C</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSSS</name>
              <description>Timestamp Sub Seconds</description>
              <bitRange>[30:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYSTIME_SECSUPDAT</name>
          <description>Holds the lower 32 bits of the second field to be written to, added to, or subtracted from the system time value</description>
          <addressOffset>0x710</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSS</name>
              <description>Timestamp Second</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>SYSTIME_NSECUP</name>
          <description>Holds 32 bits of the nano-second field to be written to, added to, or subtracted from the system time value</description>
          <addressOffset>0x714</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDSUB</name>
              <description>Add or Subtract Time</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>TSSS</name>
              <description>Timestamp Sub Seconds</description>
              <bitRange>[30:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMESTAMPADDEND</name>
          <description>This register is used by software to re-adjust the clock frequency linearly to match the Master clock frequency</description>
          <addressOffset>0x718</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSAR</name>
              <description>Timestamp Addend Register</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TARGET_TIME_SECS</name>
          <description>Holds the high 32-bits of time to be compared with the system time</description>
          <addressOffset>0x71C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSTR</name>
              <description>Target Time Seconds Registe</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>TARGET_TIME_NSEC</name>
          <description>Holds the lower 32-bits of time to be compared with the system time</description>
          <addressOffset>0x720</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRGTBUSY</name>
              <description>32 Bits of Hash Table</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>TTSLO</name>
              <description>Target Timestamp Low Register</description>
              <bitRange>[30:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_BUS_MODE</name>
          <description>Controls the DMA Host Interface Mode</description>
          <addressOffset>0x1000</addressOffset>
          <access>read-write</access>
          <resetValue>0x00020101</resetValue>
          <fields>
            <field>
              <name>RIB</name>
              <description>Rebuild INCRx Burst</description>
              <bitRange>[31:31]</bitRange>
            </field>
            <field>
              <name>PRWG</name>
              <description>Channel Priority Weights</description>
              <bitRange>[29:28]</bitRange>
            </field>
            <field>
              <name>TXPR</name>
              <description>Transmit Priority</description>
              <bitRange>[27:27]</bitRange>
            </field>
            <field>
              <name>MB</name>
              <description>Mixed Burst</description>
              <bitRange>[26:26]</bitRange>
            </field>
            <field>
              <name>AAL</name>
              <description>Address-Aligned Beats</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>PBLx8</name>
              <description>PBLx8 Mode</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>USP</name>
              <description>Use Separate PBL</description>
              <bitRange>[23:23]</bitRange>
            </field>
            <field>
              <name>RPBL</name>
              <description>Rx DMA PBL</description>
              <bitRange>[22:17]</bitRange>
            </field>
            <field>
              <name>FB</name>
              <description>Fixed Burste</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>PR</name>
              <description>Priority Ratio</description>
              <bitRange>[15:14]</bitRange>
            </field>
            <field>
              <name>PBL</name>
              <description>Programmable Burst Lengthe</description>
              <bitRange>[13:8]</bitRange>
            </field>
            <field>
              <name>DSL</name>
              <description>Descriptor Skip Length</description>
              <bitRange>[6:2]</bitRange>
            </field>
            <field>
              <name>DA</name>
              <description>DMA Arbitration Scheme</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>SWR</name>
              <description>Software Reset (Read, Write Set, and Self Clear)</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_TX_POLL_DEMAND</name>
          <description>Used by the host to instruct the DMA to poll the transmit Descriptor list</description>
          <addressOffset>0x1004</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TPD</name>
              <description>Transmit Poll Demand (Read Only and Write Trigger)</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_RX_POLL_DEMAND</name>
          <description>Used by the host to instruct the DMA to poll the Receive Descriptor list</description>
          <addressOffset>0x1008</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RPD</name>
              <description>Receive Poll Demand (Read Only and Write Trigger)</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_RX_DESC_LIST_ADDR</name>
          <description>Points the DMA to the start of the Receive Descriptor list</description>
          <addressOffset>0x100C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDESLA</name>
              <description>Start of Receive List</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_TX_DESC_LIST_ADDR</name>
          <description>Points the DMA to the start of the Transmit Descriptor list</description>
          <addressOffset>0x1010</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TDESLA</name>
              <description>Start of Transmit List</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_STATUS</name>
          <description>Used to determine the status of the DMA</description>
          <addressOffset>0x1014</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TTI</name>
              <description>Timestamp Trigger Interrupt</description>
              <bitRange>[29:29]</bitRange>
            </field>
            <field>
              <name>GMI</name>
              <description>GMAC MMC Interrupt</description>
              <bitRange>[27:27]</bitRange>
            </field>
            <field>
              <name>EB</name>
              <description>Error Bits</description>
              <bitRange>[25:23]</bitRange>
            </field>
            <field>
              <name>TS</name>
              <description>Transmit Process State</description>
              <bitRange>[22:20]</bitRange>
            </field>
            <field>
              <name>RS</name>
              <description>Receive Process State</description>
              <bitRange>[19:17]</bitRange>
            </field>
            <field>
              <name>NIS</name>
              <description>Normal Interrupt Summary</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>AIS</name>
              <description>Abnormal Interrupt Summary</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>ERI</name>
              <description>Early Receive Interrupt</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>FBI</name>
              <description>Fatal Bus Error Interruptble</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>ETI</name>
              <description>Early Transmit Interrupt</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>RWT</name>
              <description>Receive Watchdog Timeout</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RPS</name>
              <description>Receive Process Stopped</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RU</name>
              <description>Receive Buffer Unavailable</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>RI</name>
              <description>Receive Interrupt</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>UNF</name>
              <description>Transmit Underflow</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>OVF</name>
              <description>Receive Underflow</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>TJT</name>
              <description>Transmit Jabber Timeout</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TU</name>
              <description>Transmit Buffer Unavailable</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TPS</name>
              <description>Transmit Process Stopped</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TI</name>
              <description>Transmit Interrupt</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_OPER_MODE</name>
          <description>Sets the Receive and Transmit operation mode and command</description>
          <addressOffset>0x1018</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DT</name>
              <description>Disable Dropping of TCP/IP Checksum Error Frames</description>
              <bitRange>[26:26]</bitRange>
            </field>
            <field>
              <name>RSF</name>
              <description>Receive Store and Forward</description>
              <bitRange>[25:25]</bitRange>
            </field>
            <field>
              <name>DFF</name>
              <description>Disable Flushing of Received Frames</description>
              <bitRange>[24:24]</bitRange>
            </field>
            <field>
              <name>TSF</name>
              <description>Transmit Store and Forward</description>
              <bitRange>[21:21]</bitRange>
            </field>
            <field>
              <name>FTF</name>
              <description>Flush Transmit FIFO</description>
              <bitRange>[20:20]</bitRange>
            </field>
            <field>
              <name>TTC</name>
              <description>Transmit Threshold Control</description>
              <bitRange>[16:14]</bitRange>
            </field>
            <field>
              <name>ST</name>
              <description>Start or Stop Transmission Command</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>RFD</name>
              <description>Threshold for Deactivating Flow Control</description>
              <bitRange>[12:11]</bitRange>
            </field>
            <field>
              <name>RFA</name>
              <description>Threshold for Activating Flow Control</description>
              <bitRange>[10:9]</bitRange>
            </field>
            <field>
              <name>FEF</name>
              <description>Forward Error Frames</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>FUF</name>
              <description>Forward Undersized Good Frames</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>DGF</name>
              <description>Drop Giant Frames</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>RTC</name>
              <description>Receive Threshold Control</description>
              <bitRange>[4:3]</bitRange>
            </field>
            <field>
              <name>OSF</name>
              <description>Operate on Second Frame</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>SR</name>
              <description>Start or Stop Receive</description>
              <bitRange>[1:1]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_INTR_EN</name>
          <description>Enables the interrupts reported in the status register</description>
          <addressOffset>0x101C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NIE</name>
              <description>Normal Interrupt Summary Enable</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>AIE</name>
              <description>Abnormal Interrupt Summary Enable</description>
              <bitRange>[15:15]</bitRange>
            </field>
            <field>
              <name>ERE</name>
              <description>Early Receive Interrupt Enable</description>
              <bitRange>[14:14]</bitRange>
            </field>
            <field>
              <name>FBE</name>
              <description>Fatal Bus Error Enable</description>
              <bitRange>[13:13]</bitRange>
            </field>
            <field>
              <name>ETE</name>
              <description>Early Transmit Interrupt Enable</description>
              <bitRange>[10:10]</bitRange>
            </field>
            <field>
              <name>RWE</name>
              <description>Receive Watchdog Timeout Enable</description>
              <bitRange>[9:9]</bitRange>
            </field>
            <field>
              <name>RSE</name>
              <description>Receive Stopped Enable</description>
              <bitRange>[8:8]</bitRange>
            </field>
            <field>
              <name>RUE</name>
              <description>Receive Buffer Unavailable Enable</description>
              <bitRange>[7:7]</bitRange>
            </field>
            <field>
              <name>RIE</name>
              <description>Receive Interrupt Enable</description>
              <bitRange>[6:6]</bitRange>
            </field>
            <field>
              <name>UNE</name>
              <description>Underflow Interrupt Enable</description>
              <bitRange>[5:5]</bitRange>
            </field>
            <field>
              <name>OVE</name>
              <description>Overflow Interrupt Enable</description>
              <bitRange>[4:4]</bitRange>
            </field>
            <field>
              <name>THE</name>
              <description>Transmit Jabber Timeout Enable</description>
              <bitRange>[3:3]</bitRange>
            </field>
            <field>
              <name>TUE</name>
              <description>Transmit Buffer Unavailable Enable</description>
              <bitRange>[2:2]</bitRange>
            </field>
            <field>
              <name>TSE</name>
              <description>Transmit Stopped Enable</description>
              <bitRange>[1:1]</bitRange>
            </field>
            <field>
              <name>TIE</name>
              <description>Transmit Interrupt Enable</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_MISS_OVER_COUNTER</name>
          <description>Contains the counters for discarded frames because no Receive Descriptor is available</description>
          <addressOffset>0x1020</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OVFCNTOVF</name>
              <description>This bit is set every time the Overflow Frame Counter (Bits[27:17])overflows</description>
              <bitRange>[28:28]</bitRange>
            </field>
            <field>
              <name>OVFFRMCNT</name>
              <description>This field indicates the number of frames missed by the application</description>
              <bitRange>[27:17]</bitRange>
            </field>
            <field>
              <name>MISCNTOVF</name>
              <description>This bit is set every time Missed Frame Counter (Bits[15:0]) overflows</description>
              <bitRange>[16:16]</bitRange>
            </field>
            <field>
              <name>MISFRMCNT</name>
              <description>This field indicates the number of frames missed by the controller because of the Host Receive Buffer being unavailable.</description>
              <bitRange>[15:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_RX_INTR_WDOG_TIMER</name>
          <description>Watchdog timeout for Receive Interrupt from DMA</description>
          <addressOffset>0x1024</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RIWT</name>
              <description>These bits indicate the number of system clock cycles x 256 for which the watchdog timer is set.</description>
              <bitRange>[7:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_AHB_STATUS</name>
          <description>Provides the active status of the read and write channels of the AHB master interface</description>
          <addressOffset>0x102C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>AHBMASTRSTS</name>
              <description>When high, indicates that the AHB master interface FSMs are in the non-idle state</description>
              <bitRange>[0:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_CURR_TX_DESC</name>
          <description>Contains the start address of the current Transmit Descriptor read by the DMA</description>
          <addressOffset>0x1048</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CURTDESAPTR</name>
              <description>Cleared on Reset. Pointer updated by the DMA during operation.</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_CURR_RX_DESC</name>
          <description>Contains the start address of the current Receive Descriptor read by the DMA</description>
          <addressOffset>0x104C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CURRDESAPTR</name>
              <description>Cleared on Reset. Pointer updated by the DMA during operation.</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_CURR_TX_BUFR_ADDR</name>
          <description>Contains the start address of the current Receive Descriptor read by the DMA</description>
          <addressOffset>0x1050</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CURTBUFAPTR</name>
              <description>Cleared on Reset. Pointer updated by the DMA during operation.</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA_CURR_RX_BUFR_ADDR</name>
          <description>Contains the current Receive Buffer address read by the DMA</description>
          <addressOffset>0x1054</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CURTBUFAPTR</name>
              <description>Cleared on Reset. Pointer updated by the DMA during operation.</description>
              <bitRange>[31:0]</bitRange>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
  </peripherals>
</device>