UART with IRQ + Embassy example

examples/embassy/Cargo.toml

@@ -7,6 +7,7 @@ edition = "2021"
 cortex-m = { version = "0.7", features = ["critical-section-single-core"] }
 cortex-m-rt = "0.7"
 embedded-hal = "1"
+embedded-io = "0.6"
 
 rtt-target = { version = "0.5" }
 panic-rtt-target = { version = "0.1" }
@@ -16,6 +17,10 @@ embassy-sync = { version = "0.6.0" }
 embassy-time = { version = "0.3.2" }
 embassy-time-driver = { version = "0.1" }
 
+[dependencies.ringbuf]
+version = "0.4"
+default-features = false
+
 [dependencies.once_cell]
 version = "1"
 default-features = false

examples/embassy/src/bin/uart-echo-with-irq.rs

@@ -0,0 +1,155 @@
+#![no_std]
+#![no_main]
+use core::cell::RefCell;
+
+use embassy_example::EXTCLK_FREQ;
+use embassy_executor::Spawner;
+use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
+use embassy_sync::blocking_mutex::Mutex;
+use embassy_time::{Duration, Ticker};
+use embedded_hal::digital::StatefulOutputPin;
+use embedded_io::Write;
+use panic_rtt_target as _;
+use ringbuf::{
+    traits::{Consumer, Observer, Producer},
+    StaticRb,
+};
+use rtt_target::{rprintln, rtt_init_print};
+use va416xx_hal::{
+    gpio::{OutputReadablePushPull, Pin, PinsG, PG5},
+    pac::{self, interrupt},
+    prelude::*,
+    time::Hertz,
+    uart,
+};
+
+pub type SharedUart = Mutex<CriticalSectionRawMutex, RefCell<Option<uart::RxWithIrq<pac::Uart0>>>>;
+static RX: SharedUart = Mutex::new(RefCell::new(None));
+
+const BAUDRATE: u32 = 115200;
+
+// Ring buffer size.
+const RING_BUF_SIZE: usize = 2048;
+
+pub type SharedRingBuf =
+    Mutex<CriticalSectionRawMutex, RefCell<Option<StaticRb<u8, RING_BUF_SIZE>>>>;
+// Ring buffers to handling variable sized telemetry
+static RINGBUF: SharedRingBuf = Mutex::new(RefCell::new(None));
+
+// See https://embassy.dev/book/#_sharing_using_a_mutex for background information about sharing
+// a peripheral with embassy.
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    rtt_init_print!();
+    rprintln!("VA416xx UART-Embassy Example");
+
+    let mut dp = pac::Peripherals::take().unwrap();
+
+    // Initialize the systick interrupt & obtain the token to prove that we did
+    // Use the external clock connected to XTAL_N.
+    let clocks = dp
+        .clkgen
+        .constrain()
+        .xtal_n_clk_with_src_freq(Hertz::from_raw(EXTCLK_FREQ))
+        .freeze(&mut dp.sysconfig)
+        .unwrap();
+    // Safety: Only called once here.
+    unsafe {
+        embassy_example::init(
+            &mut dp.sysconfig,
+            &dp.irq_router,
+            dp.tim15,
+            dp.tim14,
+            &clocks,
+        )
+    };
+
+    let portg = PinsG::new(&mut dp.sysconfig, dp.portg);
+
+    let tx = portg.pg0.into_funsel_1();
+    let rx = portg.pg1.into_funsel_1();
+
+    let uart0 = uart::Uart::new(
+        dp.uart0,
+        (tx, rx),
+        Hertz::from_raw(BAUDRATE),
+        &mut dp.sysconfig,
+        &clocks,
+    );
+    let (mut tx, rx) = uart0.split();
+    let mut rx = rx.to_rx_with_irq();
+    rx.start();
+    RX.lock(|static_rx| {
+        static_rx.borrow_mut().replace(rx);
+    });
+    RINGBUF.lock(|static_rb| {
+        static_rb.borrow_mut().replace(StaticRb::default());
+    });
+
+    let led = portg.pg5.into_readable_push_pull_output();
+    let mut ticker = Ticker::every(Duration::from_millis(50));
+    let mut processing_buf: [u8; RING_BUF_SIZE] = [0; RING_BUF_SIZE];
+    let mut read_bytes = 0;
+    spawner.spawn(blinky(led)).expect("failed to spawn blinky");
+    loop {
+        RINGBUF.lock(|static_rb| {
+            let mut rb_borrow = static_rb.borrow_mut();
+            let rb_mut = rb_borrow.as_mut().unwrap();
+            read_bytes = rb_mut.occupied_len();
+            rb_mut.pop_slice(&mut processing_buf[0..read_bytes]);
+        });
+        // Simply send back all received data.
+        tx.write_all(&processing_buf[0..read_bytes])
+            .expect("sending back read data failed");
+        ticker.next().await;
+    }
+}
+
+#[embassy_executor::task]
+async fn blinky(mut led: Pin<PG5, OutputReadablePushPull>) {
+    let mut ticker = Ticker::every(Duration::from_millis(500));
+    loop {
+        led.toggle().ok();
+        ticker.next().await;
+    }
+}
+
+#[interrupt]
+#[allow(non_snake_case)]
+fn UART0_RX() {
+    let mut buf: [u8; 16] = [0; 16];
+    let mut read_len: usize = 0;
+    let mut irq_error = None;
+    RX.lock(|static_rx| {
+        let mut rx_borrow = static_rx.borrow_mut();
+        let rx_mut_ref = rx_borrow.as_mut().unwrap();
+        match rx_mut_ref.irq_handler(&mut buf) {
+            Ok(result) => {
+                read_len = result.bytes_read;
+            }
+            Err(e) => {
+                irq_error = Some(e);
+            }
+        }
+    });
+    let mut ringbuf_full = false;
+    if read_len > 0 {
+        // Send the received buffer to the main thread for processing via a ring buffer.
+        RINGBUF.lock(|static_rb| {
+            let mut rb_borrow = static_rb.borrow_mut();
+            let rb_mut_ref = rb_borrow.as_mut().unwrap();
+            if rb_mut_ref.vacant_len() < read_len {
+                ringbuf_full = true;
+                for _ in rb_mut_ref.pop_iter() {}
+            }
+            rb_mut_ref.push_slice(&buf[0..read_len]);
+        });
+    }
+
+    if irq_error.is_some() {
+        rprintln!("error in IRQ handler: {:?}", irq_error);
+    }
+    if ringbuf_full {
+        rprintln!("ringbuffer is full, deleted oldest data");
+    }
+}

examples/embassy/src/lib.rs

@@ -1,4 +1,6 @@
 #![no_std]
 pub mod time_driver;
 
+pub const EXTCLK_FREQ: u32 = 40_000_000;
+
 pub use time_driver::init;

examples/embassy/src/main.rs

@@ -1,5 +1,6 @@
 #![no_std]
 #![no_main]
+use embassy_example::EXTCLK_FREQ;
 use embassy_executor::Spawner;
 use embassy_time::{Duration, Instant, Ticker};
 use embedded_hal::digital::StatefulOutputPin;
@@ -7,8 +8,6 @@ use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
 use va416xx_hal::{gpio::PinsG, pac, prelude::*, time::Hertz};
 
-const EXTCLK_FREQ: u32 = 40_000_000;
-
 // main is itself an async function.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/embassy/src/time_driver.rs

@@ -17,7 +17,7 @@ use va416xx_hal::{
     enable_interrupt,
     irq_router::enable_and_init_irq_router,
     pac::{self, interrupt},
-    pwm::{assert_tim_reset_for_two_cycles, enable_tim_clk, ValidTim},
+    timer::{assert_tim_reset_for_two_cycles, enable_tim_clk, ValidTim},
 };
 
 pub type TimekeeperClk = pac::Tim15;

examples/simple/examples/dma.rs

@@ -12,7 +12,7 @@ use rtt_target::{rprintln, rtt_init_print};
 use simple_examples::peb1;
 use va416xx_hal::dma::{Dma, DmaCfg, DmaChannel, DmaCtrlBlock};
 use va416xx_hal::irq_router::enable_and_init_irq_router;
-use va416xx_hal::pwm::CountdownTimer;
+use va416xx_hal::timer::CountdownTimer;
 use va416xx_hal::{
     pac::{self, interrupt},
     prelude::*,

examples/simple/examples/pwm.rs

@@ -11,7 +11,8 @@ use va416xx_hal::{
     gpio::PinsA,
     pac,
     prelude::*,
-    pwm::{self, get_duty_from_percent, CountdownTimer, PwmA, PwmB, ReducedPwmPin},
+    pwm::{self, get_duty_from_percent, PwmA, PwmB, ReducedPwmPin},
+    timer::CountdownTimer,
 };
 
 #[entry]

flashloader/src/main.rs

@@ -169,9 +169,9 @@ mod app {
         enable_and_init_irq_router(&mut cx.device.sysconfig, &cx.device.irq_router);
         setup_edac(&mut cx.device.sysconfig);
 
-        let gpiob = PinsG::new(&mut cx.device.sysconfig, cx.device.portg);
+        let gpiog = PinsG::new(&mut cx.device.sysconfig, cx.device.portg);
-        let tx = gpiob.pg0.into_funsel_1();
+        let tx = gpiog.pg0.into_funsel_1();
-        let rx = gpiob.pg1.into_funsel_1();
+        let rx = gpiog.pg1.into_funsel_1();
 
         let uart0 = Uart::new(
             cx.device.uart0,

va416xx-hal/src/pwm.rs

@@ -9,8 +9,10 @@ use core::convert::Infallible;
 use core::marker::PhantomData;
 
 use crate::pac;
+use crate::time::Hertz;
+pub use crate::timer::ValidTim;
+use crate::timer::{TimAndPinRegister, TimDynRegister, TimPin, TimRegInterface, ValidTimAndPin};
 use crate::{clock::Clocks, gpio::DynPinId};
-pub use crate::{gpio::PinId, time::Hertz, timer::*};
 
 const DUTY_MAX: u16 = u16::MAX;
 

va416xx-hal/src/uart.rs

@@ -7,6 +7,7 @@
 //! ## Examples
 //!
 //! - [UART simple example](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/examples/simple/examples/uart.rs)
+//! - [UART echo with IRQ and Embassy](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/examples/embassy/src/bin/uart-echo-with-irq.rs)
 //! - [Flashloader app using UART with IRQs](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/flashloader)
 use core::ops::Deref;
 
@@ -806,7 +807,6 @@ impl<Uart: Instance> RxWithIrq<Uart> {
     /// API after calling this function to continue emptying the FIFO.
     pub fn irq_handler(&mut self, buf: &mut [u8; 16]) -> Result<IrqResult, IrqUartError> {
         let mut result = IrqResult::default();
-        let mut current_idx = 0;
 
         let irq_end = self.uart().irq_end().read();
         let enb_status = self.uart().enable().read();
@@ -814,27 +814,27 @@ impl<Uart: Instance> RxWithIrq<Uart> {
 
         // Half-Full interrupt. We have a guaranteed amount of data we can read.
         if irq_end.irq_rx().bit_is_set() {
-            // Determine the number of bytes to read, ensuring we leave 1 byte in the FIFO.
-            // We use this trick/hack because the timeout feature of the peripheral relies on data
-            // being in the RX FIFO. If data continues arriving, another half-full IRQ will fire.
-            // If not, the last byte(s) is/are emptied by the timeout interrupt.
             let available_bytes = self.uart().rxfifoirqtrg().read().bits() as usize;
 
             // If this interrupt bit is set, the trigger level is available at the very least.
             // Read everything as fast as possible
             for _ in 0..available_bytes {
-                buf[current_idx] = (self.uart().data().read().bits() & 0xff) as u8;
+                buf[result.bytes_read] = (self.uart().data().read().bits() & 0xff) as u8;
-                current_idx += 1;
+                result.bytes_read += 1;
             }
         }
 
         // Timeout, empty the FIFO completely.
         if irq_end.irq_rx_to().bit_is_set() {
-            let read_result = self.0.read();
+            loop {
-            // While there is data in the FIFO, write it into the reception buffer
+                // While there is data in the FIFO, write it into the reception buffer
-            while let Some(byte) = self.read_handler(&mut result.errors, &read_result) {
+                let read_result = self.0.read();
-                buf[current_idx] = byte;
+                if let Some(byte) = self.read_handler(&mut result.errors, &read_result) {
-                current_idx += 1;
+                    buf[result.bytes_read] = byte;
+                    result.bytes_read += 1;
+                } else {
+                    break;
+                }
             }
         }
 

vscode/launch.json

@@ -350,6 +350,36 @@
                 ]
             }
         },
+        {
+            "type": "cortex-debug",
+            "request": "launch",
+            "name": "UART Echo with IRQ",
+            "servertype": "jlink",
+            "jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
+            "cwd": "${workspaceRoot}",
+            "device": "Cortex-M4",
+            "svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
+            "preLaunchTask": "uart-echo-with-irq",
+            "overrideLaunchCommands": [
+                "monitor halt",
+                "monitor reset",
+                "load",
+            ],
+            "executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/uart-echo-with-irq",
+            "interface": "swd",
+            "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "auto",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
+        },
         {
             "type": "cortex-debug",
             "request": "launch",

vscode/tasks.json

@@ -95,6 +95,19 @@
                 "kind": "build",
             }
         },
+        {
+            "label": "uart-echo-with-irq",
+            "type": "shell",
+            "command": "~/.cargo/bin/cargo", // note: full path to the cargo
+            "args": [
+                "build",
+                "--bin",
+                "uart-echo-with-irq"
+            ],
+            "group": {
+                "kind": "build",
+            }
+        },
         {
             "label": "pwm-example",
             "type": "shell",