UART, WDT and CLKGEN

vorago-peb1/examples/blinky.rs

@@ -1,62 +0,0 @@
-//! Simple blinky example
-#![no_main]
-#![no_std]
-
-use cortex_m_rt::entry;
-use embedded_hal::digital::v2::{OutputPin, ToggleableOutputPin};
-use panic_halt as _;
-use va416xx_hal::{gpio::PinsG, pac};
-
-// Mask for the LED
-const LED_PG5: u32 = 1 << 5;
-
-#[allow(dead_code)]
-enum LibType {
-    Pac,
-    Hal,
-    Bsp,
-}
-
-#[entry]
-fn main() -> ! {
-    let mut dp = pac::Peripherals::take().unwrap();
-    let lib_type = LibType::Hal;
-
-    match lib_type {
-        LibType::Pac => {
-            // Enable all peripheral clocks
-            dp.SYSCONFIG
-                .peripheral_clk_enable
-                .modify(|_, w| w.portg().set_bit());
-            dp.PORTG.dir().modify(|_, w| unsafe { w.bits(LED_PG5) });
-            dp.PORTG
-                .datamask()
-                .modify(|_, w| unsafe { w.bits(LED_PG5) });
-            for _ in 0..10 {
-                dp.PORTG.clrout().write(|w| unsafe { w.bits(LED_PG5) });
-                cortex_m::asm::delay(5_000_000);
-                dp.PORTG.setout().write(|w| unsafe { w.bits(LED_PG5) });
-                cortex_m::asm::delay(5_000_000);
-            }
-            loop {
-                dp.PORTG.togout().write(|w| unsafe { w.bits(LED_PG5) });
-                cortex_m::asm::delay(25_000_000);
-            }
-        }
-        LibType::Hal => {
-            let portg = PinsG::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTG);
-            // Enable all peripheral clocks
-            let mut led = portg.pg5.into_push_pull_output();
-            for _ in 0..10 {
-                led.set_low().ok();
-                cortex_m::asm::delay(5_000_000);
-                led.set_high().ok();
-            }
-            loop {
-                led.toggle().ok();
-                cortex_m::asm::delay(25_000_000);
-            }
-        }
-        LibType::Bsp => loop {},
-    }
-}