rust/va416xx-rs
7
0
Fork 0
Code Issues Pull Requests Projects Releases 14 Wiki Activity

cfg and README update

Browse Source
This commit is contained in:
Robin Müller 2021-12-23 14:01:32 +01:00
parent 534b9809f6
commit 921ad50e28
No known key found for this signature in database
GPG Key ID: 71B58F8A3CDFA9AC
3 changed files with 51 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
.cargo/def-config.toml Normal file
View File

@ -0,0 +1,38 @@
[target.'cfg(all(target_arch = "arm", target_os = "none"))']
# uncomment ONE of these three option to make `cargo run` start a GDB session
# which option to pick depends on your system
# If the RevA board is used, replace jlink.gdb with jlink-reva.gdb
# runner = "arm-none-eabi-gdb -q -x jlink.gdb"
# runner = "gdb-multiarch -q -x jlink.gdb"
# runner = "gdb -q -x openocd.gdb"
# runner = "gdb-multiarch -q -x jlink.gdb"
rustflags = [
# This is needed if your flash or ram addresses are not aligned to 0x10000 in memory.x
# See https://github.com/rust-embedded/cortex-m-quickstart/pull/95
"-C", "link-arg=--nmagic",
# LLD (shipped with the Rust toolchain) is used as the default linker
"-C", "link-arg=-Tlink.x",
# if you run into problems with LLD switch to the GNU linker by commenting out
# this line
# "-C", "linker=arm-none-eabi-ld",
# if you need to link to pre-compiled C libraries provided by a C toolchain
# use GCC as the linker by commenting out both lines above and then
# uncommenting the three lines below
# "-C", "linker=arm-none-eabi-gcc",
# "-C", "link-arg=-Wl,-Tlink.x",
# "-C", "link-arg=-nostartfiles",
]
[build]
# Pick ONE of these compilation targets
# target = "thumbv6m-none-eabi" # Cortex-M0 and Cortex-M0+
# target = "thumbv7m-none-eabi" # Cortex-M3
# target = "thumbv7em-none-eabi" # Cortex-M4 and Cortex-M7 (no FPU)
target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU)
# target = "thumbv8m.base-none-eabi" # Cortex-M23
# target = "thumbv8m.main-none-eabi" # Cortex-M33 (no FPU)
# target = "thumbv8m.main-none-eabihf" # Cortex-M33 (with FPU)

3
.gitignore vendored
View File

@ -2,6 +2,9 @@
# will have compiled files and executables # will have compiled files and executables
/target/ /target/
# Ignore user config
/.cargo/config.toml
# Remove Cargo.lock from gitignore if creating an executable, leave it for libraries # Remove Cargo.lock from gitignore if creating an executable, leave it for libraries
# More information here https://doc.rust-lang.org/cargo/guide/cargo-toml-vs-cargo-lock.html # More information here https://doc.rust-lang.org/cargo/guide/cargo-toml-vs-cargo-lock.html
Cargo.lock Cargo.lock

10
README.md
View File

@ -6,3 +6,13 @@ After cloning, run
git submodule init git submodule init
git submodule update git submodule update
``` ```
# Using the `.cargo/config.toml` file
Use the following command to have a starting `config.toml` file
```sh
cp .cargo/def-config.toml .cargo/config.toml
```
You then can adapt the `config.toml` to your needs