From 1bd39624ff3442b21c10a7f1595c903148a73556 Mon Sep 17 00:00:00 2001 From: Robin Mueller Date: Mon, 1 Jul 2024 14:54:47 +0200 Subject: [PATCH] prepare HAL release --- va416xx-hal/.cargo/config.toml | 38 ----------------------------- va416xx-hal/.cargo/def-config.toml | 39 ------------------------------ va416xx-hal/Cargo.toml | 4 +-- va416xx-hal/README.md | 9 ++----- va416xx/Cargo.toml | 4 +-- vorago-peb1/.cargo/def-config.toml | 39 ------------------------------ 6 files changed, 6 insertions(+), 127 deletions(-) delete mode 100644 va416xx-hal/.cargo/config.toml delete mode 100644 va416xx-hal/.cargo/def-config.toml delete mode 100644 vorago-peb1/.cargo/def-config.toml diff --git a/va416xx-hal/.cargo/config.toml b/va416xx-hal/.cargo/config.toml deleted file mode 100644 index 7318f9a..0000000 --- a/va416xx-hal/.cargo/config.toml +++ /dev/null @@ -1,38 +0,0 @@ -[target.'cfg(all(target_arch = "arm", target_os = "none"))'] -# uncomment ONE of these three option to make `cargo run` start a GDB session -# which option to pick depends on your system -# If the RevA board is used, replace jlink.gdb with jlink-reva.gdb -# runner = "arm-none-eabi-gdb -q -x jlink.gdb" -# runner = "gdb-multiarch -q -x jlink.gdb" -# runner = "gdb -q -x openocd.gdb" -# runner = "gdb-multiarch -q -x jlink.gdb" - -rustflags = [ - # This is needed if your flash or ram addresses are not aligned to 0x10000 in memory.x - # See https://github.com/rust-embedded/cortex-m-quickstart/pull/95 - "-C", "link-arg=--nmagic", - - # LLD (shipped with the Rust toolchain) is used as the default linker - "-C", "link-arg=-Tlink.x", - - # if you run into problems with LLD switch to the GNU linker by commenting out - # this line - # "-C", "linker=arm-none-eabi-ld", - - # if you need to link to pre-compiled C libraries provided by a C toolchain - # use GCC as the linker by commenting out both lines above and then - # uncommenting the three lines below - # "-C", "linker=arm-none-eabi-gcc", - # "-C", "link-arg=-Wl,-Tlink.x", - # "-C", "link-arg=-nostartfiles", -] - -[build] -# Pick ONE of these compilation targets -# target = "thumbv6m-none-eabi" # Cortex-M0 and Cortex-M0+ -# target = "thumbv7m-none-eabi" # Cortex-M3 -# target = "thumbv7em-none-eabi" # Cortex-M4 and Cortex-M7 (no FPU) -target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU) -# target = "thumbv8m.base-none-eabi" # Cortex-M23 -# target = "thumbv8m.main-none-eabi" # Cortex-M33 (no FPU) -# target = "thumbv8m.main-none-eabihf" # Cortex-M33 (with FPU) \ No newline at end of file diff --git a/va416xx-hal/.cargo/def-config.toml b/va416xx-hal/.cargo/def-config.toml deleted file mode 100644 index 74cd913..0000000 --- a/va416xx-hal/.cargo/def-config.toml +++ /dev/null @@ -1,39 +0,0 @@ -[target.'cfg(all(target_arch = "arm", target_os = "none"))'] -# uncomment ONE of these three option to make `cargo run` start a GDB session -# which option to pick depends on your system -# If the RevA board is used, replace jlink.gdb with jlink-reva.gdb -# runner = "arm-none-eabi-gdb -q -x jlink/jlink.gdb" -# runner = "gdb-multiarch -q -x jlink/jlink.gdb" - -# runner = "arm-none-eabi-gdb -q -x jlink/jlink-reva.gdb" -# runner = "gdb-multiarch -q -x jlink/jlink-reva.gdb" - -rustflags = [ - # This is needed if your flash or ram addresses are not aligned to 0x10000 in memory.x - # See https://github.com/rust-embedded/cortex-m-quickstart/pull/95 - "-C", "link-arg=--nmagic", - - # LLD (shipped with the Rust toolchain) is used as the default linker - "-C", "link-arg=-Tlink.x", - - # if you run into problems with LLD switch to the GNU linker by commenting out - # this line - # "-C", "linker=arm-none-eabi-ld", - - # if you need to link to pre-compiled C libraries provided by a C toolchain - # use GCC as the linker by commenting out both lines above and then - # uncommenting the three lines below - # "-C", "linker=arm-none-eabi-gcc", - # "-C", "link-arg=-Wl,-Tlink.x", - # "-C", "link-arg=-nostartfiles", -] - -[build] -# Pick ONE of these compilation targets -# target = "thumbv6m-none-eabi" # Cortex-M0 and Cortex-M0+ -# target = "thumbv7m-none-eabi" # Cortex-M3 -# target = "thumbv7em-none-eabi" # Cortex-M4 and Cortex-M7 (no FPU) -target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU) -# target = "thumbv8m.base-none-eabi" # Cortex-M23 -# target = "thumbv8m.main-none-eabi" # Cortex-M33 (no FPU) -# target = "thumbv8m.main-none-eabihf" # Cortex-M33 (with FPU) \ No newline at end of file diff --git a/va416xx-hal/Cargo.toml b/va416xx-hal/Cargo.toml index d1b3c8a..25a9679 100644 --- a/va416xx-hal/Cargo.toml +++ b/va416xx-hal/Cargo.toml @@ -4,8 +4,8 @@ version = "0.1.0" authors = ["Robin Mueller "] edition = "2021" description = "HAL for the Vorago VA416xx family of MCUs" -homepage = "https://egit.irs.uni-stuttgart.de/rust/va416xx-hal" -repository = "https://egit.irs.uni-stuttgart.de/rust/va416xx-hal" +homepage = "https://egit.irs.uni-stuttgart.de/rust/va416xx-rs" +repository = "https://egit.irs.uni-stuttgart.de/rust/va416xx-rs" license = "Apache-2.0" keywords = ["no-std", "hal", "cortex-m", "vorago", "va416xx"] categories = ["embedded", "no-std", "hardware-support"] diff --git a/va416xx-hal/README.md b/va416xx-hal/README.md index ae7a0e3..47a4d87 100644 --- a/va416xx-hal/README.md +++ b/va416xx-hal/README.md @@ -8,12 +8,6 @@ raw PAC. This crate also implements traits specified by the [embedded-hal](https://github.com/rust-embedded/embedded-hal) project, making it compatible with various drivers in the embedded rust ecosystem. -## Supported Boards - - The first way to use this HAL will probably be with the - [PEB1 development board](https://www.voragotech.com/products/peb1va416x0-development-kit). - The BSP provided for this board also contains instructions how to flash the board. - ## Building Building an application requires the `thumbv7em-none-eabihf` cross-compiler toolchain. @@ -44,7 +38,8 @@ is contained within the 1. Set up your Rust cross-compiler if you have not done so yet. See more in the [build chapter](#Building) 2. Create a new binary crate with `cargo init` 3. To ensure that `cargo build` cross-compiles, it is recommended to create a `.cargo/config.toml` - file. A sample `.cargo/config.toml` file is provided in this repository as well + file. You can use [this](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/.cargo/def-config.toml) + sample file as a starting point. 4. Copy the `memory.x` file into your project. This file contains information required by the linker. 5. Copy the `blinky.rs` file to the `src/main.rs` file in your binary crate 6. You need to add some dependencies to your `Cargo.toml` file diff --git a/va416xx/Cargo.toml b/va416xx/Cargo.toml index d611d90..25134f4 100644 --- a/va416xx/Cargo.toml +++ b/va416xx/Cargo.toml @@ -4,8 +4,8 @@ version = "0.2.0" authors = ["Robin Mueller "] edition = "2021" description = "PAC for the Vorago VA416xx family of MCUs" -homepage = "https://egit.irs.uni-stuttgart.de/rust/va416xx" -repository = "https://egit.irs.uni-stuttgart.de/rust/va416xx" +homepage = "https://egit.irs.uni-stuttgart.de/rust/va416xx-rs" +repository = "https://egit.irs.uni-stuttgart.de/rust/va416xx-rs" license = "Apache-2.0" keywords = ["no-std", "arm", "cortex-m", "vorago", "va416xx"] categories = ["embedded", "no-std", "hardware-support"] diff --git a/vorago-peb1/.cargo/def-config.toml b/vorago-peb1/.cargo/def-config.toml deleted file mode 100644 index 74cd913..0000000 --- a/vorago-peb1/.cargo/def-config.toml +++ /dev/null @@ -1,39 +0,0 @@ -[target.'cfg(all(target_arch = "arm", target_os = "none"))'] -# uncomment ONE of these three option to make `cargo run` start a GDB session -# which option to pick depends on your system -# If the RevA board is used, replace jlink.gdb with jlink-reva.gdb -# runner = "arm-none-eabi-gdb -q -x jlink/jlink.gdb" -# runner = "gdb-multiarch -q -x jlink/jlink.gdb" - -# runner = "arm-none-eabi-gdb -q -x jlink/jlink-reva.gdb" -# runner = "gdb-multiarch -q -x jlink/jlink-reva.gdb" - -rustflags = [ - # This is needed if your flash or ram addresses are not aligned to 0x10000 in memory.x - # See https://github.com/rust-embedded/cortex-m-quickstart/pull/95 - "-C", "link-arg=--nmagic", - - # LLD (shipped with the Rust toolchain) is used as the default linker - "-C", "link-arg=-Tlink.x", - - # if you run into problems with LLD switch to the GNU linker by commenting out - # this line - # "-C", "linker=arm-none-eabi-ld", - - # if you need to link to pre-compiled C libraries provided by a C toolchain - # use GCC as the linker by commenting out both lines above and then - # uncommenting the three lines below - # "-C", "linker=arm-none-eabi-gcc", - # "-C", "link-arg=-Wl,-Tlink.x", - # "-C", "link-arg=-nostartfiles", -] - -[build] -# Pick ONE of these compilation targets -# target = "thumbv6m-none-eabi" # Cortex-M0 and Cortex-M0+ -# target = "thumbv7m-none-eabi" # Cortex-M3 -# target = "thumbv7em-none-eabi" # Cortex-M4 and Cortex-M7 (no FPU) -target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU) -# target = "thumbv8m.base-none-eabi" # Cortex-M23 -# target = "thumbv8m.main-none-eabi" # Cortex-M33 (no FPU) -# target = "thumbv8m.main-none-eabihf" # Cortex-M33 (with FPU) \ No newline at end of file -- 2.43.0