update VS Code settings for RTT block detection #26

Merged
muellerr merged 1 commits from add-rtt-addr-detection-update-vscode into main 2024-09-17 10:55:15 +02:00
3 changed files with 213 additions and 19 deletions

View File

@ -96,7 +96,9 @@ example.
### Using VS Code ### Using VS Code
Assuming a working debug connection to your VA108xx board, you can debug using VS Code with Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug). the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug). Please make sure that
[`objdump-multiarch` and `nm-multiarch`](https://forums.raspberrypi.com/viewtopic.php?t=333146)
are installed as well.
Some sample configuration files for VS code were provided and can be used by running Some sample configuration files for VS code were provided and can be used by running
`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug` `cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
@ -111,4 +113,5 @@ configuration variables in your `settings.json`:
- `"cortex-debug.gdbPath.osx"` - `"cortex-debug.gdbPath.osx"`
The provided VS Code configurations also provide an integrated RTT logger, which you can access The provided VS Code configurations also provide an integrated RTT logger, which you can access
via the terminal at `RTT Ch:0 console`. via the terminal at `RTT Ch:0 console`. In order for the RTT block address detection to
work properly, `objdump-multiarch` and `nm-multiarch` need to be installed.

View File

@ -74,8 +74,7 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
@ -104,8 +103,7 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
@ -134,8 +132,7 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
@ -164,11 +161,11 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
"timestamp": true,
"type": "console" "type": "console"
} }
] ]
@ -194,8 +191,7 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
@ -224,8 +220,7 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
@ -255,8 +250,7 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,
@ -286,8 +280,127 @@
"runToEntryPoint": "main", "runToEntryPoint": "main",
"rttConfig": { "rttConfig": {
"enabled": true, "enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason.. "address": "auto",
"address": "0x1fff8000", "decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Debug PWM Example",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "pwm-example",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/examples/pwm",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Debug DMA Example",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "dma-example",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/examples/dma",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Bootloader",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "bootloader",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/bootloader",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Flashloader",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "flashloader",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/flashloader",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [ "decoders": [
{ {
"port": 0, "port": 0,

View File

@ -3,6 +3,32 @@
// for the documentation about the tasks.json format // for the documentation about the tasks.json format
"version": "2.0.0", "version": "2.0.0",
"tasks": [ "tasks": [
{
"label": "bootloader",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--bin",
"bootloader"
],
"group": {
"kind": "build",
}
},
{
"label": "flashloader",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--bin",
"flashloader"
],
"group": {
"kind": "build",
}
},
{ {
"label": "blinky-pac-example", "label": "blinky-pac-example",
"type": "shell", "type": "shell",
@ -29,6 +55,19 @@
"kind": "build", "kind": "build",
} }
}, },
{
"label": "timer-ticks-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--example",
"timer-ticks"
],
"group": {
"kind": "build",
}
},
{ {
"label": "blinky-example", "label": "blinky-example",
"type": "shell", "type": "shell",
@ -56,6 +95,19 @@
"kind": "build", "kind": "build",
} }
}, },
{
"label": "pwm-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--example",
"pwm"
],
"group": {
"kind": "build",
}
},
{ {
"label": "wdt-example", "label": "wdt-example",
"type": "shell", "type": "shell",
@ -108,5 +160,31 @@
"kind": "build", "kind": "build",
} }
}, },
{
"label": "dma-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--example",
"dma"
],
"group": {
"kind": "build",
}
},
{
"label": "embassy-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--bin",
"embassy-example"
],
"group": {
"kind": "build",
}
},
] ]
} }