update VS Code settings for RTT block detection #26

Merged
muellerr merged 1 commits from add-rtt-addr-detection-update-vscode into main 2024-09-17 10:55:15 +02:00
3 changed files with 213 additions and 19 deletions

View File

@ -96,7 +96,9 @@ example.
### Using VS Code
Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug). Please make sure that
[`objdump-multiarch` and `nm-multiarch`](https://forums.raspberrypi.com/viewtopic.php?t=333146)
are installed as well.
Some sample configuration files for VS code were provided and can be used by running
`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
@ -111,4 +113,5 @@ configuration variables in your `settings.json`:
- `"cortex-debug.gdbPath.osx"`
The provided VS Code configurations also provide an integrated RTT logger, which you can access
via the terminal at `RTT Ch:0 console`.
via the terminal at `RTT Ch:0 console`. In order for the RTT block address detection to
work properly, `objdump-multiarch` and `nm-multiarch` need to be installed.

View File

@ -74,8 +74,7 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
@ -104,8 +103,7 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
@ -134,8 +132,7 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
@ -164,11 +161,11 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
@ -194,8 +191,7 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
@ -224,8 +220,7 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
@ -255,8 +250,7 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
@ -286,8 +280,127 @@
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
// Have to use exact address unfortunately. "auto" does not work for some reason..
"address": "0x1fff8000",
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Debug PWM Example",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "pwm-example",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/examples/pwm",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Debug DMA Example",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "dma-example",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/examples/dma",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Bootloader",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "bootloader",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/bootloader",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,
"timestamp": true,
"type": "console"
}
]
}
},
{
"type": "cortex-debug",
"request": "launch",
"name": "Flashloader",
"servertype": "jlink",
"jlinkscript": "${workspaceFolder}/jlink/JLinkSettings.JLinkScript",
"cwd": "${workspaceRoot}",
"device": "Cortex-M4",
"svdFile": "${workspaceFolder}/va416xx/svd/va416xx.svd.patched",
"preLaunchTask": "flashloader",
"overrideLaunchCommands": [
"monitor halt",
"monitor reset",
"load",
],
"executable": "${workspaceFolder}/target/thumbv7em-none-eabihf/debug/flashloader",
"interface": "swd",
"runToEntryPoint": "main",
"rttConfig": {
"enabled": true,
"address": "auto",
"decoders": [
{
"port": 0,

View File

@ -3,6 +3,32 @@
// for the documentation about the tasks.json format
"version": "2.0.0",
"tasks": [
{
"label": "bootloader",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--bin",
"bootloader"
],
"group": {
"kind": "build",
}
},
{
"label": "flashloader",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--bin",
"flashloader"
],
"group": {
"kind": "build",
}
},
{
"label": "blinky-pac-example",
"type": "shell",
@ -29,6 +55,19 @@
"kind": "build",
}
},
{
"label": "timer-ticks-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--example",
"timer-ticks"
],
"group": {
"kind": "build",
}
},
{
"label": "blinky-example",
"type": "shell",
@ -56,6 +95,19 @@
"kind": "build",
}
},
{
"label": "pwm-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--example",
"pwm"
],
"group": {
"kind": "build",
}
},
{
"label": "wdt-example",
"type": "shell",
@ -108,5 +160,31 @@
"kind": "build",
}
},
{
"label": "dma-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--example",
"dma"
],
"group": {
"kind": "build",
}
},
{
"label": "embassy-example",
"type": "shell",
"command": "~/.cargo/bin/cargo", // note: full path to the cargo
"args": [
"build",
"--bin",
"embassy-example"
],
"group": {
"kind": "build",
}
},
]
}