smaller improvements #28

Merged
muellerr merged 1 commits from more-smaller-improvements into main 2024-09-18 12:33:58 +02:00
6 changed files with 28 additions and 5 deletions

View File

@ -311,6 +311,12 @@ impl ClkgenCfgr {
self
}
#[inline]
pub fn pll_cfg(mut self, pll_cfg: PllCfg) -> Self {
self.pll_cfg = Some(pll_cfg);
self
}
#[inline]
pub fn ref_clk_sel(mut self, ref_clk_sel: RefClkSel) -> Self {
self.ref_clk_sel = ref_clk_sel;
@ -318,7 +324,7 @@ impl ClkgenCfgr {
}
/// Configures all clocks and return a clock configuration structure containing the final
/// frozen clock.
/// frozen clocks.
///
/// Internal implementation details: This implementation is based on the HAL implementation
/// which performs a lot of delays. I do not know if all of those are necessary, but
@ -499,7 +505,7 @@ impl Clocks {
}
/// Returns the frequency of the APB0 which is equal to the system clock.
pub fn apb0(&self) -> Hertz {
pub const fn apb0(&self) -> Hertz {
self.sysclk()
}

View File

@ -21,7 +21,6 @@
//! ## Examples
//!
//! - [Blinky example](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/examples/simple/examples/blinky.rs)
#[derive(Debug, PartialEq, Eq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct IsMaskedError;

View File

@ -1,8 +1,16 @@
//! IRQ Router peripheral support.
use crate::{
clock::{PeripheralSelect, SyscfgExt},
pac,
};
/// This enables and initiates the peripheral.
///
/// Please note that this method also writes 0 to the registers which do not have 0 as the default
/// reset value. The programmers guide v1.2 and the actual values inspected using a SVD viewer
/// are inconsistent here, and the registers being non-zero can actually lead to weird bugs
/// when working with interrupts. Registers DMASELx and ADCSEL/DMASELx will reset to 0x7f and 0x1f
/// respectively instead of 0x00.
pub fn enable_and_init_irq_router(sysconfig: &mut pac::Sysconfig, irq_router: &pac::IrqRouter) {
sysconfig.enable_peripheral_clock(PeripheralSelect::IrqRouter);
sysconfig.assert_periph_reset_for_two_cycles(PeripheralSelect::IrqRouter);

View File

@ -20,7 +20,7 @@
//! is not very accurate. You can use the [crate::clock] module for this. If you are working
//! with interrupts, it is strongly recommended to set up the IRQ router with the
//! [crate::irq_router] module at the very least because that peripheral has confusing and/or
//! faulty register reset values which might leads to weird bugs and glitches.
//! faulty register reset values which might lead to weird bugs and glitches.
#![no_std]
#![cfg_attr(docsrs, feature(doc_auto_cfg))]
#[cfg(test)]
@ -46,7 +46,6 @@ pub mod edac;
pub mod gpio;
pub mod i2c;
pub mod irq_router;
pub mod nvm;
pub mod pwm;
pub mod spi;
pub mod time;
@ -55,6 +54,9 @@ pub mod typelevel;
pub mod uart;
pub mod wdt;
#[cfg(feature = "va41630")]
pub mod nvm;
#[cfg(not(feature = "va41628"))]
pub mod adc;
#[cfg(not(feature = "va41628"))]

View File

@ -1,3 +1,10 @@
//! Non-volatile memory (NVM) driver.
//!
//! Provides a basic API to work with the internal NVM of the VA41630 MCU.
//!
//! # Examples
//!
//! - [Flashloader application](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/flashloader)
use embedded_hal::spi::MODE_0;
use crate::clock::{Clocks, SyscfgExt};

View File

@ -3,6 +3,7 @@
//! ## Examples
//!
//! - [UART simple example](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/examples/simple/examples/uart.rs)
//! - [Flashloader app using UART with IRQs](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/flashloader)
use core::ops::Deref;
use embedded_hal_nb::serial::Read;