Cargo.toml

@@ -1,6 +1,6 @@
 [workspace]
 resolver = "2"
-members = [
+members = [ "examples/simple",
 	"va416xx",
 	"va416xx-hal",
 	"vorago-peb1"

README.md

@@ -30,25 +30,28 @@ to conveniently flash with `cargo run`.
 Use the following command to have a starting configuration for VS Code:
 
 ```sh
-cp vscode .vscode -r
+cp -rT vscode .vscode
 ```
 
 You can then adapt the files in `.vscode` to your needs.
 
-## Flashing, running and debugging with the command line
+## Flashing, running and debugging the software
 
-### Prerequisites
+You can use CLI or VS Code for flashing, running and debugging. In any case, take
+care of installing the pre-requisites first.
+
+### Pre-Requisites
 
 1. [SEGGER J-Link tools](https://www.segger.com/downloads/jlink/) installed
 2. [gdb-multiarch](https://packages.debian.org/sid/gdb-multiarch) or similar
    cross-architecture debugger installed. All commands here assume `gdb-multiarch`.
 
-### Flashing and debugging the blinky application
+### Using CLI
 
 You can build the blinky example application with the following command
 
 ```sh
-cargo build -p va416xx-hal --example blinky
+cargo build --example blinky
 ```
 
 Start the GDB server first. The server needs to be started with a certain configuration and with
@@ -75,9 +78,22 @@ runner configuration, for example with the following lines in your `.cargo/confi
 runner = "gdb-multiarch -q -x jlink/jlink.gdb"
 ```
 
-After that, you can simply use `cargo run -p va416xx-hal --example blinky` to flash the blinky
+After that, you can simply use `cargo run --example blinky` to flash the blinky
 example.
 
-## Flashing, running and debugging with VS Code
+### Using VS Code
 
-TODO
+Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
+the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
+
+Some sample configuration files for VS code were provided and can be used by running
+`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
+to automatically rebuild and flash your application.
+
+If you would like to use a custom GDB application, you can specify the gdb binary in the following
+configuration variables in your `settings.json`:
+
+- `"cortex-debug.gdbPath"`
+- `"cortex-debug.gdbPath.linux"`
+- `"cortex-debug.gdbPath.windows"`
+- `"cortex-debug.gdbPath.osx"`

examples/simple/Cargo.toml

@@ -0,0 +1,16 @@
+[package]
+name = "simple_examples"
+version = "0.1.0"
+edition = "2021"
+
+[dependencies]
+cortex-m-rt = "0.7"
+va416xx-hal = { path = "../../va416xx-hal" }
+panic-rtt-target = { version = "0.1.3" }
+rtt-target = { version = "0.5" }
+cortex-m = { version = "0.7", features = ["critical-section-single-core"]}
+embedded-hal = "1"
+embedded-hal-nb = "1"
+nb = "1"
+embedded-io = "0.6"
+panic-halt = "0.2"

examples/simple/examples/blinky-hal.rs

@@ -4,13 +4,16 @@
 
 use cortex_m_rt::entry;
 use embedded_hal::digital::StatefulOutputPin;
-use panic_halt as _;
+use panic_rtt_target as _;
+use rtt_target::{rprintln, rtt_init_print};
 use va416xx_hal::{gpio::PinsG, pac};
 
 #[entry]
 fn main() -> ! {
-    // SAFETY: Peripherals are only stolen once here.
-    let mut dp = unsafe { pac::Peripherals::steal() };
+    rtt_init_print!();
+    rprintln!("VA416xx HAL blinky example");
+
+    let mut dp = pac::Peripherals::take().unwrap();
     let portg = PinsG::new(&mut dp.sysconfig, Some(dp.ioconfig), dp.portg);
     let mut led = portg.pg5.into_readable_push_pull_output();
     //let mut delay = CountDownTimer::new(&mut dp.SYSCONFIG, 50.mhz(), dp.TIM0);

examples/simple/examples/blinky-pac.rs

@@ -11,8 +11,7 @@ const LED_PG5: u32 = 1 << 5;
 
 #[entry]
 fn main() -> ! {
-    // SAFETY: Peripherals are only stolen once here.
-    let dp = unsafe { pac::Peripherals::steal() };
+    let dp = pac::Peripherals::take().unwrap();
     // Enable all peripheral clocks
     dp.sysconfig
         .peripheral_clk_enable()

examples/simple/examples/rtt-log.rs

@@ -1,11 +1,10 @@
-//! Code to test RTT logger functionality.
+// Code to test RTT logger functionality.
 #![no_main]
 #![no_std]
 
 use cortex_m_rt::entry;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va416xx as _;
 use va416xx_hal::pac;
 
 // Mask for the LED
@@ -13,8 +12,7 @@ const LED_PG5: u32 = 1 << 5;
 
 #[entry]
 fn main() -> ! {
-    // SAFETY: Peripherals are only stolen once here.
-    let dp = unsafe { pac::Peripherals::steal() };
+    let dp = pac::Peripherals::take().unwrap();
     // Enable all peripheral clocks
     dp.sysconfig
         .peripheral_clk_enable()
@@ -25,7 +23,7 @@ fn main() -> ! {
         .modify(|_, w| unsafe { w.bits(LED_PG5) });
 
     rtt_init_print!();
-    rprintln!("-- RTT Demo --");
+    rprintln!("VA416xx RTT Demo");
     let mut counter = 0;
     loop {
         rprintln!("{}: Hello, world!", counter);

examples/simple/examples/uart.rs

@@ -1,13 +1,16 @@
-//! UART example application. Sends a test string over a UART and then enters
-//! echo mode
+// UART example application. Sends a test string over a UART and then enters
+// echo mode
 #![no_main]
 #![no_std]
 
 use cortex_m_rt::entry;
-use embedded_io::{Read, Write};
+use embedded_hal_nb::serial::Read;
+use embedded_io::Write;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va416xx_hal::time::{Hertz, MegaHertz};
+use simple_examples::peb1;
+use va416xx_hal::clock::ClkgenExt;
+use va416xx_hal::time::Hertz;
 use va416xx_hal::{gpio::PinsG, pac, uart};
 
 #[entry]
@@ -15,28 +18,34 @@ fn main() -> ! {
     rtt_init_print!();
     rprintln!("-- VA416xx UART example application--");
 
-    // SAFETY: Peripherals are only stolen once here.
-    let mut dp = unsafe { pac::Peripherals::steal() };
+    let mut dp = pac::Peripherals::take().unwrap();
+
+    // Use the external clock connected to XTAL_N.
+    let clocks = dp
+        .clkgen
+        .constrain()
+        .xtal_n_clk_with_src_freq(peb1::EXTCLK_FREQ)
+        .freeze(&mut dp.sysconfig)
+        .unwrap();
 
     let gpiob = PinsG::new(&mut dp.sysconfig, Some(dp.ioconfig), dp.portg);
     let tx = gpiob.pg0.into_funsel_1();
     let rx = gpiob.pg1.into_funsel_1();
 
-    let uartb = uart::Uart::uart0(
+    let uart0 = uart::Uart::uart0(
         dp.uart0,
         (tx, rx),
         Hertz::from_raw(115200),
         &mut dp.sysconfig,
-        Hertz::from_raw(MegaHertz::from_raw(20).to_Hz()),
+        &clocks,
     );
-    let (mut tx, mut rx) = uartb.split();
-    let mut recv_buf: [u8; 32] = [0; 32];
-    writeln!(tx, "Hello World").unwrap();
+    let (mut tx, mut rx) = uart0.split();
+    writeln!(tx, "Hello World\n\r").unwrap();
     loop {
         // Echo what is received on the serial link.
-        match rx.read(&mut recv_buf) {
+        match nb::block!(rx.read()) {
             Ok(recvd) => {
-                if let Err(e) = tx.write(&recv_buf[0..recvd]) {
+                if let Err(e) = embedded_hal_nb::serial::Write::write(&mut tx, recvd) {
                     rprintln!("UART TX error: {:?}", e);
                 }
             }

examples/simple/examples/wdt.rs

@@ -0,0 +1,79 @@
+// Code to test the watchdog timer.
+#![no_main]
+#![no_std]
+
+use core::cell::Cell;
+use cortex_m::interrupt::Mutex;
+use cortex_m_rt::entry;
+use panic_rtt_target as _;
+use rtt_target::{rprintln, rtt_init_print};
+use simple_examples::peb1;
+use va416xx_hal::pac::{self, interrupt};
+use va416xx_hal::prelude::*;
+use va416xx_hal::wdt::WdtController;
+
+static WDT_INTRPT_COUNT: Mutex<Cell<u32>> = Mutex::new(Cell::new(0));
+
+#[derive(Debug, PartialEq, Eq)]
+#[allow(dead_code)]
+enum TestMode {
+    // Watchdog is fed by main loop, which runs with high period.
+    FedByMain,
+    // Watchdog is fed by watchdog IRQ.
+    FedByIrq,
+    AllowReset,
+}
+const TEST_MODE: TestMode = TestMode::FedByMain;
+const WDT_ROLLOVER_MS: u32 = 100;
+
+#[entry]
+fn main() -> ! {
+    rtt_init_print!();
+    rprintln!("-- VA416xx WDT example application--");
+    let cp = cortex_m::Peripherals::take().unwrap();
+    let mut dp = pac::Peripherals::take().unwrap();
+
+    // Use the external clock connected to XTAL_N.
+    let clocks = dp
+        .clkgen
+        .constrain()
+        .xtal_n_clk_with_src_freq(peb1::EXTCLK_FREQ)
+        .freeze(&mut dp.sysconfig)
+        .unwrap();
+    let mut delay_sysclk = cortex_m::delay::Delay::new(cp.SYST, clocks.apb0().raw());
+
+    let mut last_interrupt_counter = 0;
+    let mut wdt_ctrl =
+        WdtController::start(&mut dp.sysconfig, dp.watch_dog, &clocks, WDT_ROLLOVER_MS);
+    wdt_ctrl.enable_reset();
+    loop {
+        if TEST_MODE != TestMode::AllowReset {
+            wdt_ctrl.feed();
+        }
+        let interrupt_counter = cortex_m::interrupt::free(|cs| WDT_INTRPT_COUNT.borrow(cs).get());
+        if interrupt_counter > last_interrupt_counter {
+            rprintln!("interrupt counter has increased to {}", interrupt_counter);
+            last_interrupt_counter = interrupt_counter;
+        }
+        match TEST_MODE {
+            TestMode::FedByMain => delay_sysclk.delay_ms(WDT_ROLLOVER_MS / 5),
+            TestMode::FedByIrq => delay_sysclk.delay_ms(WDT_ROLLOVER_MS),
+            _ => (),
+        }
+    }
+}
+
+#[interrupt]
+#[allow(non_snake_case)]
+fn WATCHDOG() {
+    cortex_m::interrupt::free(|cs| {
+        WDT_INTRPT_COUNT
+            .borrow(cs)
+            .set(WDT_INTRPT_COUNT.borrow(cs).get() + 1);
+    });
+    let wdt = unsafe { pac::WatchDog::steal() };
+    // Clear interrupt.
+    if TEST_MODE != TestMode::AllowReset {
+        wdt.wdogintclr().write(|w| unsafe { w.bits(1) });
+    }
+}

examples/simple/src/lib.rs

@@ -0,0 +1,10 @@
+#![no_std]
+
+pub mod peb1 {
+    use va416xx_hal::time::Hertz;
+
+    // The clock on the PEB1 board has a 20 MHz clock which is increased to 40 MHz with a configurable
+    // PLL by default.
+    pub const EXTCLK_FREQ: Hertz = Hertz::from_raw(40_000_000);
+    pub const XTAL_FREQ: Hertz = Hertz::from_raw(10_000_000);
+}

examples/simple/src/main.rs

@@ -0,0 +1,13 @@
+//! Dummy app which does not do anything.
+#![no_main]
+#![no_std]
+
+use cortex_m_rt::entry;
+use panic_rtt_target as _;
+
+#[entry]
+fn main() -> ! {
+    loop {
+        cortex_m::asm::nop();
+    }
+}

va416xx-hal/Cargo.toml

@@ -11,28 +11,24 @@ keywords = ["no-std", "hal", "cortex-m", "vorago", "va416xx"]
 categories = ["embedded", "no-std", "hardware-support"]
 
 [dependencies]
-cortex-m = "0.7"
-cortex-m-rt = "0.7"
+cortex-m = { version = "0.7", features = ["critical-section-single-core"] }
 nb = "1"
 paste = "1"
 embedded-hal-nb = "1"
 embedded-hal = "1"
 embedded-io = "0.6"
-typenum = "1.12.0"
+typenum = "1"
 defmt = { version = "0.3", optional = true }
 fugit = "0.3"
 delegate = "0.12"
 
 [dependencies.va416xx]
 path = "../va416xx"
+default-features = false
 version = "0.1.0"
+features = ["critical-section"]
 
 [features]
+default = ["rt", "revb"]
 rt = ["va416xx/rt"]
-defmt = ["dep:defmt"]
-
-[dev-dependencies]
-panic-rtt-target = { version = "0.1.3" }
-rtt-target = { version = "0.5" }
-panic-halt = "0.2"
-cortex-m = { version = "0.7.6", features = ["critical-section-single-core"]}
+revb = []

va416xx-hal/src/clock.rs

@@ -1,5 +1,11 @@
 //! This also includes functionality to enable the peripheral clocks
-use va416xx::Sysconfig;
+//use va416xx::{, Sysconfig};
+use crate::pac;
+
+use crate::time::Hertz;
+
+pub const HBO_FREQ: Hertz = Hertz::from_raw(20_000_000);
+pub const XTAL_OSC_TSTART_MS: u32 = 15;
 
 #[derive(Copy, Clone, PartialEq)]
 pub enum PeripheralSelect {
@@ -50,14 +56,470 @@ pub enum FilterClkSel {
     Clk7 = 7,
 }
 
-pub fn enable_peripheral_clock(syscfg: &mut Sysconfig, clock: PeripheralSelect) {
+#[inline(always)]
+pub fn enable_peripheral_clock(syscfg: &mut pac::Sysconfig, clock: PeripheralSelect) {
     syscfg
         .peripheral_clk_enable()
         .modify(|r, w| unsafe { w.bits(r.bits() | (1 << clock as u8)) });
 }
 
-pub fn disable_peripheral_clock(syscfg: &mut Sysconfig, clock: PeripheralSelect) {
+#[inline(always)]
+pub fn disable_peripheral_clock(syscfg: &mut pac::Sysconfig, clock: PeripheralSelect) {
     syscfg
         .peripheral_clk_enable()
         .modify(|r, w| unsafe { w.bits(r.bits() & !(1 << clock as u8)) });
 }
+
+#[inline(always)]
+pub fn assert_periph_reset(syscfg: &mut pac::Sysconfig, periph: PeripheralSelect) {
+    syscfg
+        .peripheral_reset()
+        .modify(|r, w| unsafe { w.bits(r.bits() & !(1 << periph as u8)) });
+}
+
+#[inline(always)]
+pub fn deassert_periph_reset(syscfg: &mut pac::Sysconfig, periph: PeripheralSelect) {
+    syscfg
+        .peripheral_reset()
+        .modify(|r, w| unsafe { w.bits(r.bits() | (1 << periph as u8)) });
+}
+
+pub trait SyscfgExt {
+    fn enable_peripheral_clock(&mut self, clock: PeripheralClocks);
+
+    fn disable_peripheral_clock(&mut self, clock: PeripheralClocks);
+
+    fn assert_periph_reset(&mut self, clock: PeripheralSelect);
+
+    fn deassert_periph_reset(&mut self, clock: PeripheralSelect);
+}
+
+impl SyscfgExt for pac::Sysconfig {
+    #[inline(always)]
+    fn enable_peripheral_clock(&mut self, clock: PeripheralClocks) {
+        enable_peripheral_clock(self, clock)
+    }
+
+    #[inline(always)]
+    fn disable_peripheral_clock(&mut self, clock: PeripheralClocks) {
+        disable_peripheral_clock(self, clock)
+    }
+
+    #[inline(always)]
+    fn assert_periph_reset(&mut self, clock: PeripheralSelect) {
+        assert_periph_reset(self, clock)
+    }
+
+    #[inline(always)]
+    fn deassert_periph_reset(&mut self, clock: PeripheralSelect) {
+        deassert_periph_reset(self, clock)
+    }
+}
+
+/// Refer to chapter 8 (p.57) of the programmers guide for detailed information.
+#[derive(Debug, Copy, Clone, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum ClkselSys {
+    // Internal Heart-Beat Osciallator. Not tightly controlled (+/-20 %). Not recommended as the regular clock!
+    Hbo = 0b00,
+    // External clock signal on XTAL_N line, 1-100 MHz
+    XtalN = 0b01,
+    // Internal Phase-Locked Loop.
+    Pll = 0b10,
+    // Crystal oscillator amplified, 4-10 MHz.
+    XtalOsc = 0b11,
+}
+
+/// This selects the input clock to the the CLKGEN peripheral in addition to the HBO clock.
+///
+/// This can either be a clock connected directly on the XTAL_N line or a chrystal on the XTAL_P
+/// line which goes through an oscillator amplifier.
+///
+/// Refer to chapter 8 (p.57) of the programmers guide for detailed information.
+#[derive(Debug, Default, Copy, Clone, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum RefClkSel {
+    #[default]
+    None = 0b00,
+    XtalOsc = 0b01,
+    XtalN = 0b10,
+}
+
+#[derive(Debug, Default, Copy, Clone, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum ClkDivSel {
+    #[default]
+    Div1 = 0b00,
+    Div2 = 0b01,
+    Div4 = 0b10,
+    Div8 = 0b11,
+}
+
+#[derive(Debug, Copy, Clone, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum AdcClkDivSel {
+    Div8 = 0b00,
+    Div4 = 0b01,
+    Div2 = 0b10,
+    Div1 = 0b11,
+}
+
+#[derive(Debug, Default, Copy, Clone, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct PllCfg {
+    /// Reference clock divider.
+    pub clkr: u8,
+    /// Clock divider on feedback path
+    pub clkf: u8,
+    // Output clock divider.
+    pub clkod: u8,
+    /// Bandwidth adjustment
+    pub bwadj: u8,
+}
+
+pub fn clk_after_div(clk: Hertz, div_sel: ClkDivSel) -> Hertz {
+    match div_sel {
+        ClkDivSel::Div1 => clk,
+        ClkDivSel::Div2 => clk / 2,
+        ClkDivSel::Div4 => clk / 4,
+        ClkDivSel::Div8 => clk / 8,
+    }
+}
+
+/// Wait for 500 reference clock cycles like specified in the datasheet.
+pub fn pll_setup_delay() {
+    for _ in 0..500 {
+        cortex_m::asm::nop()
+    }
+}
+
+pub trait ClkgenExt {
+    fn constrain(self) -> ClkgenCfgr;
+}
+
+impl ClkgenExt for pac::Clkgen {
+    fn constrain(self) -> ClkgenCfgr {
+        ClkgenCfgr {
+            source_clk: None,
+            ref_clk_sel: RefClkSel::None,
+            clksel_sys: ClkselSys::Hbo,
+            clk_div_sel: ClkDivSel::Div1,
+            clk_lost_detection: false,
+            pll_lock_lost_detection: false,
+            pll_cfg: None,
+            clkgen: self,
+        }
+    }
+}
+
+pub struct ClkgenCfgr {
+    ref_clk_sel: RefClkSel,
+    clksel_sys: ClkselSys,
+    clk_div_sel: ClkDivSel,
+    /// The source clock frequency which is either an external clock connected to XTAL_N, or a
+    /// crystal connected to the XTAL_OSC input.
+    source_clk: Option<Hertz>,
+    pll_cfg: Option<PllCfg>,
+    clk_lost_detection: bool,
+    /// Feature only works on revision B of the board.
+    #[cfg(feature = "revb")]
+    pll_lock_lost_detection: bool,
+    clkgen: pac::Clkgen,
+}
+
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct ClkSourceFreqNotSet;
+
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum ClkCfgError {
+    ClkSourceFreqNotSet,
+    PllConfigNotSet,
+    PllInitError,
+    InconsistentCfg,
+}
+
+/// Delays a given amount of milliseconds.
+///
+/// Taken from the HAL implementation. This implementation is probably not precise and it
+/// also blocks!
+pub fn hbo_clock_delay_ms(ms: u32) {
+    let wdt = unsafe { pac::WatchDog::steal() };
+    for _ in 0..ms {
+        for _ in 0..10_000 {
+            cortex_m::asm::nop();
+        }
+        wdt.wdogintclr().write(|w| unsafe { w.bits(1) });
+    }
+}
+
+impl ClkgenCfgr {
+    #[inline]
+    pub fn source_clk(mut self, src_clk: Hertz) -> Self {
+        self.source_clk = Some(src_clk);
+        self
+    }
+
+    /// This function can be used to utilize the XTAL_N clock input directly without the
+    /// oscillator.
+    ///
+    /// It sets the internal configuration to [ClkselSys::XtalN] and [RefClkSel::XtalN].
+    #[inline]
+    pub fn xtal_n_clk(mut self) -> Self {
+        self.clksel_sys = ClkselSys::XtalN;
+        self.ref_clk_sel = RefClkSel::XtalN;
+        self
+    }
+
+    #[inline]
+    pub fn xtal_n_clk_with_src_freq(mut self, src_clk: Hertz) -> Self {
+        self = self.xtal_n_clk();
+        self.source_clk(src_clk)
+    }
+
+    #[inline]
+    pub fn clksel_sys(mut self, clksel_sys: ClkselSys) -> Self {
+        self.clksel_sys = clksel_sys;
+        self
+    }
+
+    #[inline]
+    pub fn ref_clk_sel(mut self, ref_clk_sel: RefClkSel) -> Self {
+        self.ref_clk_sel = ref_clk_sel;
+        self
+    }
+
+    /// Configures all clocks and return a clock configuration structure containing the final
+    /// frozen clock.
+    ///
+    /// Internal implementation details: This implementation is based on the HAL implementation
+    /// which performs a lot of delays. I do not know if all of those are necessary, but
+    /// I am going to be conservative here and assume that the vendor has tested though and
+    /// might have had a reason for those, so I am going to keep them. Chances are, this
+    /// process only has to be performed once, and it does not matter if it takes a few
+    /// microseconds or milliseconds longer.
+    pub fn freeze(self, syscfg: &mut pac::Sysconfig) -> Result<Clocks, ClkCfgError> {
+        // Sanitize configuration.
+        if self.source_clk.is_none() {
+            return Err(ClkCfgError::ClkSourceFreqNotSet);
+        }
+        if self.clksel_sys == ClkselSys::XtalOsc && self.ref_clk_sel != RefClkSel::XtalOsc {
+            return Err(ClkCfgError::InconsistentCfg);
+        }
+        if self.clksel_sys == ClkselSys::XtalN && self.ref_clk_sel != RefClkSel::XtalN {
+            return Err(ClkCfgError::InconsistentCfg);
+        }
+        if self.clksel_sys == ClkselSys::Pll && self.pll_cfg.is_none() {
+            return Err(ClkCfgError::PllConfigNotSet);
+        }
+
+        syscfg.enable_peripheral_clock(PeripheralSelect::Clkgen);
+        let mut final_sysclk = self.source_clk.unwrap();
+        // The HAL forces back the HBO clock here with a delay.. Even though this is
+        // not stricly necessary when coming from a fresh start, it could be still become relevant
+        // later if the clock lost detection mechanism require a re-configuration of the clocks.
+        // Therefore, we do it here as well.
+        self.clkgen
+            .ctrl0()
+            .modify(|_, w| unsafe { w.clksel_sys().bits(ClkselSys::Hbo as u8) });
+        pll_setup_delay();
+        self.clkgen
+            .ctrl0()
+            .modify(|_, w| unsafe { w.clk_div_sel().bits(ClkDivSel::Div1 as u8) });
+
+        // Set up oscillator and PLL input clock.
+        self.clkgen
+            .ctrl0()
+            .modify(|_, w| unsafe { w.ref_clk_sel().bits(self.ref_clk_sel as u8) });
+        self.clkgen.ctrl1().modify(|_, w| {
+            w.xtal_en().clear_bit();
+            w.xtal_n_en().clear_bit();
+            w
+        });
+        match self.ref_clk_sel {
+            RefClkSel::None => pll_setup_delay(),
+            RefClkSel::XtalOsc => {
+                self.clkgen.ctrl1().modify(|_, w| w.xtal_en().set_bit());
+                hbo_clock_delay_ms(XTAL_OSC_TSTART_MS);
+            }
+            RefClkSel::XtalN => {
+                self.clkgen.ctrl1().modify(|_, w| w.xtal_n_en().set_bit());
+                pll_setup_delay()
+            }
+        }
+
+        // Set up PLL configuration.
+        match self.pll_cfg {
+            Some(cfg) => {
+                self.clkgen.ctrl0().modify(|_, w| w.pll_pwdn().clear_bit());
+                // Done in C HAL. I guess this gives the PLL some time to power down properly.
+                cortex_m::asm::nop();
+                cortex_m::asm::nop();
+                self.clkgen.ctrl0().modify(|_, w| {
+                    unsafe {
+                        w.pll_clkf().bits(cfg.clkf);
+                    }
+                    unsafe {
+                        w.pll_clkr().bits(cfg.clkr);
+                    }
+                    unsafe {
+                        w.pll_clkod().bits(cfg.clkod);
+                    }
+                    unsafe {
+                        w.pll_bwadj().bits(cfg.bwadj);
+                    }
+                    w.pll_test().clear_bit();
+                    w.pll_bypass().clear_bit();
+                    w.pll_intfb().set_bit()
+                });
+                // Taken from SystemCoreClockUpdate implementation from Vorago.
+                final_sysclk /= cfg.clkr as u32 + 1;
+                final_sysclk *= cfg.clkf as u32 + 1;
+                final_sysclk /= cfg.clkod as u32 + 1;
+
+                // Reset PLL.
+                self.clkgen.ctrl0().modify(|_, w| w.pll_reset().set_bit());
+                // The HAL does this, the datasheet specifies a delay of 5 us. I guess it does not
+                // really matter because the PLL lock detect is used later..
+                pll_setup_delay();
+                self.clkgen.ctrl0().modify(|_, w| w.pll_reset().clear_bit());
+                pll_setup_delay();
+
+                // check for lock
+                let stat = self.clkgen.stat().read();
+                if stat.fbslip().bit() || stat.rfslip().bit() {
+                    pll_setup_delay();
+                    if stat.fbslip().bit() || stat.rfslip().bit() {
+                        // This is what the HAL does. We could continue, but then we would at least
+                        // have to somehow report a partial error.. Chances are, the user does not
+                        // want to continue with a broken PLL clock.
+                        return Err(ClkCfgError::PllInitError);
+                    }
+                }
+            }
+            None => self.clkgen.ctrl0().modify(|_, w| w.pll_pwdn().set_bit()),
+        }
+
+        if self.clk_lost_detection {
+            rearm_sysclk_lost_with_periph(&self.clkgen)
+        }
+        #[cfg(feature = "revb")]
+        if self.pll_lock_lost_detection {
+            rearm_pll_lock_lost_with_periph(&self.clkgen)
+        }
+
+        self.clkgen
+            .ctrl0()
+            .modify(|_, w| unsafe { w.clk_div_sel().bits(self.clk_div_sel as u8) });
+        final_sysclk = clk_after_div(final_sysclk, self.clk_div_sel);
+
+        // The HAL does this. I don't know why..
+        pll_setup_delay();
+
+        self.clkgen
+            .ctrl0()
+            .modify(|_, w| unsafe { w.clksel_sys().bits(self.clksel_sys as u8) });
+
+        // I will just do the ADC stuff like Vorago does it.
+        // ADC clock (must be 2-12.5 MHz)
+        // NOTE: Not using divide by 1 or /2 ratio in REVA silicon because of triggering issue
+        // For this reason, keep SYSCLK above 8MHz to have the ADC /4 ratio in range)
+        if final_sysclk.raw() <= 50_000_000 {
+            self.clkgen
+                .ctrl1()
+                .modify(|_, w| unsafe { w.adc_clk_div_sel().bits(AdcClkDivSel::Div4 as u8) });
+        } else {
+            self.clkgen
+                .ctrl1()
+                .modify(|_, w| unsafe { w.adc_clk_div_sel().bits(AdcClkDivSel::Div8 as u8) });
+        }
+
+        Ok(Clocks {
+            sysclk: final_sysclk,
+            apb1: final_sysclk / 2,
+            apb2: final_sysclk / 4,
+        })
+    }
+}
+
+/// Frozen clock frequencies
+///
+/// The existence of this value indicates that the clock configuration can no longer be changed
+#[derive(Copy, Clone, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct Clocks {
+    sysclk: Hertz,
+    apb1: Hertz,
+    apb2: Hertz,
+}
+
+impl Clocks {
+    /// Returns the frequency of the HBO clock
+    pub fn hbo(&self) -> Hertz {
+        HBO_FREQ
+    }
+
+    /// Returns the frequency of the APB0 which is equal to the system clock.
+    pub fn apb0(&self) -> Hertz {
+        self.sysclk()
+    }
+
+    /// Returns system clock divied by 2.
+    pub fn apb1(&self) -> Hertz {
+        self.apb1
+    }
+
+    /// Returns system clock divied by 4.
+    pub fn apb2(&self) -> Hertz {
+        self.apb2
+    }
+
+    /// Returns the system (core) frequency
+    pub fn sysclk(&self) -> Hertz {
+        self.sysclk
+    }
+}
+
+pub fn rearm_sysclk_lost() {
+    rearm_sysclk_lost_with_periph(&unsafe { pac::Clkgen::steal() })
+}
+
+fn rearm_sysclk_lost_with_periph(clkgen: &pac::Clkgen) {
+    clkgen
+        .ctrl0()
+        .modify(|_, w| w.sys_clk_lost_det_en().set_bit());
+    clkgen
+        .ctrl1()
+        .write(|w| w.sys_clk_lost_det_rearm().set_bit());
+    clkgen
+        .ctrl1()
+        .write(|w| w.sys_clk_lost_det_rearm().clear_bit());
+}
+
+#[cfg(feature = "revb")]
+pub fn rearm_pll_lock_lost() {
+    rearm_pll_lock_lost_with_periph(&unsafe { pac::Clkgen::steal() })
+}
+
+fn rearm_pll_lock_lost_with_periph(clkgen: &pac::Clkgen) {
+    clkgen
+        .ctrl1()
+        .modify(|_, w| w.pll_lost_lock_det_en().set_bit());
+    clkgen.ctrl1().write(|w| w.pll_lck_det_rearm().set_bit());
+    clkgen.ctrl1().write(|w| w.pll_lck_det_rearm().clear_bit());
+}
+
+#[cfg(test)]
+mod tests {
+
+    use super::*;
+
+    #[test]
+    fn test_basic_div() {
+        assert_eq!(
+            clk_after_div(Hertz::from_raw(10_000_000), super::ClkDivSel::Div2),
+            Hertz::from_raw(5_000_000)
+        );
+    }
+}

va416xx-hal/src/gpio/mod.rs

@@ -24,7 +24,7 @@
 
 #[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
-pub struct IsMaskedError(pub(crate) ());
+pub struct IsMaskedError;
 
 macro_rules! common_reg_if_functions {
     () => {

va416xx-hal/src/gpio/pin.rs

@@ -554,6 +554,22 @@ where
     }
 }
 
+impl<I, C> InputPin for Pin<I, Output<C>>
+where
+    I: PinId,
+    C: OutputConfig + ReadableOutput,
+{
+    #[inline]
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
+        Ok(self._is_high())
+    }
+
+    #[inline]
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
+        Ok(self._is_low())
+    }
+}
+
 //==================================================================================================
 //  Registers
 //==================================================================================================

va416xx-hal/src/gpio/reg.rs

@@ -209,7 +209,7 @@ pub(super) unsafe trait RegisterInterface {
     #[inline(always)]
     fn read_pin_masked(&self) -> Result<bool, IsMaskedError> {
         if !self.datamask() {
-            Err(IsMaskedError(()))
+            Err(IsMaskedError)
         } else {
             Ok(((self.port_reg().datain().read().bits() >> self.id().num) & 0x01) == 1)
         }
@@ -234,7 +234,7 @@ pub(super) unsafe trait RegisterInterface {
     #[inline]
     fn write_pin_masked(&mut self, bit: bool) -> Result<(), IsMaskedError> {
         if !self.datamask() {
-            Err(IsMaskedError(()))
+            Err(IsMaskedError)
         } else {
             // Safety: SETOUT is a "mask" register, and we only write the bit for
             // this pin ID

va416xx-hal/src/lib.rs

@@ -1,7 +1,10 @@
 #![no_std]
+#[cfg(test)]
+extern crate std;
 
-pub use va416xx;
+pub use va416xx as device;
 pub use va416xx as pac;
+
 pub mod prelude;
 
 pub mod clock;
@@ -9,6 +12,7 @@ pub mod gpio;
 pub mod time;
 pub mod typelevel;
 pub mod uart;
+pub mod wdt;
 
 #[derive(Debug, Eq, Copy, Clone, PartialEq)]
 pub enum FunSel {

va416xx-hal/src/prelude.rs

@@ -1 +1,4 @@
-
+//! Prelude
+pub use crate::clock::{ClkgenExt, SyscfgExt};
+pub use fugit::ExtU32 as _;
+pub use fugit::RateExtU32 as _;

va416xx-hal/src/typelevel.rs

@@ -60,14 +60,14 @@ impl Sealed for NoneT {}
 /// specific type. Stated differently, it guarantees that `T == Specific` in
 /// the following example.
 ///
-/// ```
+/// ```ignore
 /// where T: Is<Type = Specific>
 /// ```
 ///
 /// Moreover, the super traits guarantee that any instance of or reference to a
 /// type `T` can be converted into the `Specific` type.
 ///
-/// ```
+/// ```ignore
 /// fn example<T>(mut any: T)
 /// where
 ///     T: Is<Type = Specific>,

va416xx-hal/src/uart.rs

@@ -4,7 +4,7 @@ use core::ops::Deref;
 use embedded_hal_nb::serial::Read;
 use fugit::RateExtU32;
 
-use crate::clock::{self};
+use crate::clock::{self, Clocks};
 use crate::gpio::{AltFunc1, Pin, PD11, PD12, PE2, PE3, PF11, PF12, PF8, PF9, PG0, PG1};
 use crate::time::Hertz;
 use crate::{
@@ -337,20 +337,33 @@ pub trait Instance: Deref<Target = uart_base::RegisterBlock> {
 }
 
 impl<Uart: Instance> UartBase<Uart> {
+    fn init(self, config: Config, clocks: &Clocks) -> Self {
+        if Uart::IDX == 2 {
+            self.init_with_clock_freq(config, clocks.apb1())
+        } else {
+            self.init_with_clock_freq(config, clocks.apb2())
+        }
+    }
+
     /// This function assumes that the peripheral clock was alredy enabled
     /// in the SYSCONFIG register
-    fn init(self, config: Config, sys_clk: Hertz) -> Self {
+    fn init_with_clock_freq(self, config: Config, apb_clk: Hertz) -> Self {
         let baud_multiplier = match config.baud8 {
             false => 16,
             true => 8,
         };
+        // This is the calculation: (64.0 * (x - integer_part as f32) + 0.5) as u32 without floating
+        // point calculations.
+        let frac = ((apb_clk.raw() % (config.baudrate.raw() * 16)) * 64
+            + (config.baudrate.raw() * 8))
+            / (config.baudrate.raw() * 16);
         // Calculations here are derived from chapter 10.4.4 (p.74) of the datasheet.
-        let x = sys_clk.raw() as f32 / (config.baudrate.raw() * baud_multiplier) as f32;
+        let x = apb_clk.raw() as f32 / (config.baudrate.raw() * baud_multiplier) as f32;
         let integer_part = x as u32;
-        let frac = (64.0 * (x - integer_part as f32) + 0.5) as u32;
-        self.uart
-            .clkscale()
-            .write(|w| unsafe { w.bits(integer_part * 64 + frac) });
+        self.uart.clkscale().write(|w| unsafe {
+            w.frac().bits(frac as u8);
+            w.int().bits(integer_part)
+        });
 
         let (paren, pareven) = match config.parity {
             Parity::None => (false, false),
@@ -459,10 +472,16 @@ impl<UartInstance, Pins> Uart<UartInstance, Pins>
 where
     UartInstance: Instance,
 {
+    fn init(mut self, config: Config, clocks: &Clocks) -> Self {
+        self.inner = self.inner.init(config, clocks);
+        self
+    }
+
     /// This function assumes that the peripheral clock was already enabled
     /// in the SYSCONFIG register
-    fn init(mut self, config: Config, sys_clk: Hertz) -> Self {
-        self.inner = self.inner.init(config, sys_clk);
+    #[allow(dead_code)]
+    fn init_with_clock_freq(mut self, config: Config, sys_clk: Hertz) -> Self {
+        self.inner = self.inner.init_with_clock_freq(config, sys_clk);
         self
     }
 
@@ -798,7 +817,7 @@ macro_rules! uart_impl {
                     pins: Pins,
                     config: impl Into<Config>,
                     syscfg: &mut va416xx::Sysconfig,
-                    sys_clk: impl Into<Hertz>
+                    clocks: &Clocks
                 ) -> Self
                 {
                     crate::clock::enable_peripheral_clock(syscfg, $clk_enb_enum);
@@ -809,7 +828,29 @@ macro_rules! uart_impl {
                             rx: Rx::new(),
                         },
                         pins,
-                    }.init(config.into(), sys_clk.into())
+                    }.init(config.into(), clocks)
+                }
+
+                paste::paste! {
+                    pub fn [ <$uartx _with_clock_freq> ](
+                        uart: $Uartx,
+                        pins: Pins,
+                        config: impl Into<Config>,
+                        syscfg: &mut va416xx::Sysconfig,
+                        clock: impl Into<Hertz>,
+                    ) -> Self
+                    {
+                        crate::clock::enable_peripheral_clock(syscfg, $clk_enb_enum);
+                        Uart {
+                            inner: UartBase {
+                                uart,
+                                tx: Tx::new(),
+                                rx: Rx::new(),
+                            },
+                            pins,
+                        }.init_with_clock_freq(config.into(), clock.into())
+                    }
+
                 }
             }
 

va416xx-hal/src/wdt.rs

@@ -0,0 +1,114 @@
+use crate::time::Hertz;
+use crate::{
+    clock::{Clocks, PeripheralSelect},
+    pac,
+    prelude::SyscfgExt,
+};
+
+pub const WDT_UNLOCK_VALUE: u32 = 0x1ACC_E551;
+
+pub struct WdtController {
+    clock_freq: Hertz,
+    wdt: pac::WatchDog,
+}
+
+/// Enable the watchdog interrupt
+///
+/// # Safety
+///
+/// This function is `unsafe` because it can break mask-based critical sections.
+#[inline]
+pub unsafe fn enable_wdt_interrupts() {
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::WATCHDOG);
+    }
+}
+
+#[inline]
+pub fn disable_wdt_interrupts() {
+    cortex_m::peripheral::NVIC::mask(pac::Interrupt::WATCHDOG);
+}
+
+impl WdtController {
+    pub fn new(
+        &self,
+        syscfg: &mut pac::Sysconfig,
+        wdt: pac::WatchDog,
+        clocks: &Clocks,
+        wdt_freq_ms: u32,
+    ) -> Self {
+        Self::start(syscfg, wdt, clocks, wdt_freq_ms)
+    }
+
+    pub fn start(
+        syscfg: &mut pac::Sysconfig,
+        wdt: pac::WatchDog,
+        clocks: &Clocks,
+        wdt_freq_ms: u32,
+    ) -> Self {
+        syscfg.enable_peripheral_clock(PeripheralSelect::Watchdog);
+        // It's done like that in Vorago examples. Not exactly sure why the reset is necessary
+        // though..
+        syscfg.assert_periph_reset(PeripheralSelect::Watchdog);
+        cortex_m::asm::nop();
+        cortex_m::asm::nop();
+        syscfg.deassert_periph_reset(PeripheralSelect::Watchdog);
+
+        let wdt_clock = clocks.apb2();
+        let mut wdt_ctrl = Self {
+            clock_freq: wdt_clock,
+            wdt,
+        };
+        wdt_ctrl.set_freq(wdt_freq_ms);
+        wdt_ctrl.wdt.wdogcontrol().write(|w| w.inten().set_bit());
+        wdt_ctrl.feed();
+        // Unmask the watchdog interrupt
+        unsafe {
+            enable_wdt_interrupts();
+        }
+        wdt_ctrl
+    }
+
+    #[inline]
+    pub fn set_freq(&mut self, freq_ms: u32) {
+        let counter = (self.clock_freq.raw() / 1000) * freq_ms;
+        self.wdt.wdogload().write(|w| unsafe { w.bits(counter) });
+    }
+
+    #[inline]
+    pub fn disable_reset(&mut self) {
+        self.wdt.wdogcontrol().modify(|_, w| w.resen().clear_bit())
+    }
+
+    #[inline]
+    pub fn enable_reset(&mut self) {
+        self.wdt.wdogcontrol().modify(|_, w| w.resen().set_bit())
+    }
+
+    #[inline]
+    pub fn counter(&self) -> u32 {
+        self.wdt.wdogvalue().read().bits()
+    }
+
+    #[inline]
+    pub fn feed(&self) {
+        self.wdt.wdogintclr().write(|w| unsafe { w.bits(1) });
+    }
+
+    #[inline]
+    pub fn lock(&self) {
+        self.wdt.wdoglock().write(|w| unsafe { w.bits(0) });
+    }
+
+    #[inline]
+    pub fn unlock(&self) {
+        self.wdt
+            .wdoglock()
+            .write(|w| unsafe { w.bits(WDT_UNLOCK_VALUE) });
+    }
+
+    #[inline]
+    pub fn is_locked(&self) -> bool {
+        self.wdt.wdogload().read().bits() == 1
+    }
+}

va416xx/Cargo.toml

@@ -15,6 +15,7 @@ categories = ["embedded", "no-std", "hardware-support"]
 [dependencies]
 cortex-m = "0.7"
 vcell = "0.1.3"
+critical-section = { version = "1", optional = true }
 
 [dependencies.cortex-m-rt]
 optional = true
@@ -22,3 +23,7 @@ version = ">=0.6.15,<0.8"
 
 [features]
 rt = ["cortex-m-rt/device"]
+
+[package.metadata.docs.rs]
+all-features = true
+rustdoc-args = ["--cfg", "docs_rs", "--generate-link-to-definition"]

va416xx/README.md

@@ -1,5 +1,4 @@
 [![Crates.io](https://img.shields.io/crates/v/va416xx)](https://crates.io/crates/va416xx)
-[![build](https://github.com/us-irs/va416xx-rs/actions/workflows/ci.yml/badge.svg)](https://github.com/us-irs/va416xx-rs/actions/workflows/ci.yml)
 [![docs.rs](https://img.shields.io/docsrs/va416xx)](https://docs.rs/va416xx)
 
 # PAC for the Vorago VA416xx microcontroller family

va416xx/gen-helper.sh

@@ -29,7 +29,7 @@ then
 fi
 
 svdtools patch svd/va416xx-patch.yml
-${svd2rust_bin} -i svd/va416xx.svd.patched
+${svd2rust_bin} --reexport-interrupt -i svd/va416xx.svd.patched
 
 result=$?
 if [ $result -ne 0 ]; then

va416xx/src/lib.rs

@@ -3,10 +3,16 @@ svd2rust release can be generated by cloning the svd2rust [repository], checking
 #![allow(non_camel_case_types)]
 #![allow(non_snake_case)]
 #![no_std]
+// Manually inserted.
+#![cfg_attr(docs_rs, feature(doc_auto_cfg))]
 use core::marker::PhantomData;
 use core::ops::Deref;
 #[doc = r"Number available in the NVIC for configuring priority"]
 pub const NVIC_PRIO_BITS: u8 = 4;
+#[cfg(feature = "rt")]
+pub use self::Interrupt as interrupt;
+#[cfg(feature = "rt")]
+pub use cortex_m_rt::interrupt;
 #[allow(unused_imports)]
 use generic::*;
 #[doc = r"Common register and bit access and modify traits"]

va416xx/src/porta.rs

@@ -1,4 +1,4 @@
-// Manually inserted.
+// Added manually.
 #![allow(clippy::identity_op)]
 
 #[repr(C)]

vorago-peb1/examples/blinky.rs

@@ -1,62 +0,0 @@
-//! Simple blinky example
-#![no_main]
-#![no_std]
-
-use cortex_m_rt::entry;
-use embedded_hal::digital::v2::{OutputPin, ToggleableOutputPin};
-use panic_halt as _;
-use va416xx_hal::{gpio::PinsG, pac};
-
-// Mask for the LED
-const LED_PG5: u32 = 1 << 5;
-
-#[allow(dead_code)]
-enum LibType {
-    Pac,
-    Hal,
-    Bsp,
-}
-
-#[entry]
-fn main() -> ! {
-    let mut dp = pac::Peripherals::take().unwrap();
-    let lib_type = LibType::Hal;
-
-    match lib_type {
-        LibType::Pac => {
-            // Enable all peripheral clocks
-            dp.SYSCONFIG
-                .peripheral_clk_enable
-                .modify(|_, w| w.portg().set_bit());
-            dp.PORTG.dir().modify(|_, w| unsafe { w.bits(LED_PG5) });
-            dp.PORTG
-                .datamask()
-                .modify(|_, w| unsafe { w.bits(LED_PG5) });
-            for _ in 0..10 {
-                dp.PORTG.clrout().write(|w| unsafe { w.bits(LED_PG5) });
-                cortex_m::asm::delay(5_000_000);
-                dp.PORTG.setout().write(|w| unsafe { w.bits(LED_PG5) });
-                cortex_m::asm::delay(5_000_000);
-            }
-            loop {
-                dp.PORTG.togout().write(|w| unsafe { w.bits(LED_PG5) });
-                cortex_m::asm::delay(25_000_000);
-            }
-        }
-        LibType::Hal => {
-            let portg = PinsG::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTG);
-            // Enable all peripheral clocks
-            let mut led = portg.pg5.into_push_pull_output();
-            for _ in 0..10 {
-                led.set_low().ok();
-                cortex_m::asm::delay(5_000_000);
-                led.set_high().ok();
-            }
-            loop {
-                led.toggle().ok();
-                cortex_m::asm::delay(25_000_000);
-            }
-        }
-        LibType::Bsp => loop {},
-    }
-}