//! This is the **H**ardware **A**bstraction **L**ayer (HAL) for the VA416xx MCU family.
//!
//! It is an additional hardware abstraction on top of the [peripheral access API](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/va416xx).
//!
//! It is the result of reading the datasheet for the device and encoding a type-safe layer over the
//! raw PAC. This crate also implements traits specified by the
//! [embedded-hal](https://github.com/rust-embedded/embedded-hal) project, making it compatible with
//! various drivers in the embedded rust ecosystem.
//!
//! It is generally advised to enable ONE of the following device features to use this crate
//! depending on which chip you are using:
//!
//! - `va41630`
//! - `va41629`
//! - `va41628`
//! - `va41620`
//!
//! If no option is specified, only access to APIs which are common for all families or
//! which are not disabled for specific families is granted.
//!
//! When using this HAL and writing applications for the VA416xx family in general, it is strongly
//! recommended that you set up the clock properly, because the default internal HBO clock
//! is not very accurate. You can use the [crate::clock] module for this. If you are working
//! with interrupts, it is strongly recommended to set up the IRQ router with the
//! [crate::irq_router] module at the very least because that peripheral has confusing and/or
//! faulty register reset values which might lead to weird bugs and glitches.
#![no_std]
#![cfg_attr(docsrs, feature(doc_auto_cfg))]
#[cfg(test)]
extern crate std;

use gpio::Port;
pub use va416xx as device;
pub use va416xx as pac;

pub mod prelude;

pub mod clock;
pub mod dma;
pub mod edac;
pub mod gpio;
pub mod i2c;
pub mod irq_router;
pub mod pins;
pub mod pwm;
pub mod spi;
pub mod time;
pub mod timer;
pub mod uart;
pub mod wdt;

#[cfg(feature = "va41630")]
pub mod nvm;

#[cfg(not(feature = "va41628"))]
pub mod adc;
#[cfg(not(feature = "va41628"))]
pub mod dac;

pub use vorago_shared_periphs::{
    assert_peripheral_reset, deassert_peripheral_reset, disable_nvic_interrupt,
    disable_peripheral_clock, enable_nvic_interrupt, enable_peripheral_clock,
    reset_peripheral_for_cycles, FunSel, PeripheralSelect,
};

#[derive(Debug, PartialEq, Eq, thiserror::Error)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[error("invalid pin with number {0}")]
pub struct InvalidPinError(u8);

/// Can be used to manually manipulate the function select of port pins.
///
/// The function selection table can be found on p.286 of the programmers guide. Please note
/// that most of the structures and APIs in this library will automatically correctly configure
/// the pin or statically expect the correct pin type.
#[inline]
pub fn port_function_select(
    ioconfig: &mut pac::Ioconfig,
    port: Port,
    pin: u8,
    funsel: FunSel,
) -> Result<(), InvalidPinError> {
    if (port == Port::G && pin >= 8) || pin >= 16 {
        return Err(InvalidPinError(pin));
    }
    let reg_block = match port {
        Port::A => ioconfig.porta(pin as usize),
        Port::B => ioconfig.portb0(pin as usize),
        Port::C => ioconfig.portc0(pin as usize),
        Port::D => ioconfig.portd0(pin as usize),
        Port::E => ioconfig.porte0(pin as usize),
        Port::F => ioconfig.portf0(pin as usize),
        Port::G => ioconfig.portg0(pin as usize),
    };

    reg_block.modify(|_, w| unsafe { w.funsel().bits(funsel as u8) });
    Ok(())
}

pub trait SyscfgExt {
    fn enable_peripheral_clock(&mut self, clock: PeripheralSelect);

    fn disable_peripheral_clock(&mut self, clock: PeripheralSelect);

    fn assert_periph_reset(&mut self, periph: PeripheralSelect);

    fn deassert_periph_reset(&mut self, periph: PeripheralSelect);

    fn reset_peripheral_reset_for_cycles(&mut self, periph: PeripheralSelect, cycles: usize);
}

impl SyscfgExt for pac::Sysconfig {
    #[inline(always)]
    fn enable_peripheral_clock(&mut self, clock: PeripheralSelect) {
        enable_peripheral_clock(clock)
    }

    #[inline(always)]
    fn disable_peripheral_clock(&mut self, clock: PeripheralSelect) {
        disable_peripheral_clock(clock)
    }

    #[inline(always)]
    fn assert_periph_reset(&mut self, clock: PeripheralSelect) {
        assert_peripheral_reset(clock)
    }

    #[inline(always)]
    fn deassert_periph_reset(&mut self, clock: PeripheralSelect) {
        deassert_peripheral_reset(clock)
    }

    #[inline(always)]
    fn reset_peripheral_reset_for_cycles(&mut self, periph: PeripheralSelect, cycles: usize) {
        reset_peripheral_for_cycles(periph, cycles)
    }
}