Robin Mueller
677c6fa033
Some checks failed
Rust/va416xx-rs/pipeline/pr-main There was a failure building this commit
|
||
---|---|---|
.. | ||
slot-a-blinky | ||
slot-b-blinky | ||
src | ||
.gitignore | ||
Cargo.toml | ||
image-loader.py | ||
loader.toml | ||
README.md | ||
requirements.txt |
VA416xx Flashloader Application
This flashloader shows a minimal example for a self-updatable Rust software which exposes
a simple PUS (CCSDS) interface to update the software. It also provides a Python application
called the image-loader.py
which can be used to upload compiled images to the flashloader
application to write them to the NVM.
Please note that the both the application and the image loader are tailored towards usage with the bootloader provided by this repository.
The software can quickly be adapted to interface with a real primary on-board software instead of the Python script provided here to upload images because it uses a low-level CCSDS based packet interface.
Using the Python image loader
The Python image loader communicates with the Rust flashload application using a dedicated serial port with a baudrate of 115200.
It is recommended to run the script in a dedicated virtual environment. For example, on UNIX
systems you can use python3 -m venv venv
and then source venv/bin/activate
to create
and activate a virtual environment.
After that, you can use
pip install -r requirements.txt
to install all required dependencies.
After that, it is recommended to use ./image-load.py -h
to get an overview of some options.
The flash loader uses the UART0 interface of the VA416xx board to perform CCSDS based
communication. The Python image loader application will search for a file named loader.toml
and
use the serial_port
key to determine the serial port to use for serial communication.
Examples
You can use
./image-loader.py -p
to send a ping an verify the connection.
You can use
cd flashloader/slot-a-blinky
cargo build --release
cd ../..
./image-loader.py -t a ./slot-a-blinky/target/thumbv7em-none-eabihf/release/slot-a-blinky
to build the slot A sample application and upload it to a running flash loader application to write it to slot A.
You can use
./image-loader.py -c -t a
to corrupt the image A and test that it switches to image B after a failed CRC check instead.