diff --git a/Cargo.toml b/Cargo.toml
index 4b59bc6..232f85e 100644
--- a/Cargo.toml
+++ b/Cargo.toml
@@ -18,7 +18,7 @@ dummy-pin = "0.1.1"
 max116xx-10bit = "0.2.1"
 
 [dependencies.va108xx-hal]
-version = "0.4.2"
+version = "0.4.3"
 features = ["rt"]
 
 [features]
diff --git a/examples/blinky-leds.rs b/examples/blinky-leds.rs
index 7df72fa..b6d1192 100644
--- a/examples/blinky-leds.rs
+++ b/examples/blinky-leds.rs
@@ -9,7 +9,7 @@
 use cortex_m_rt::entry;
 use embedded_hal::digital::v2::ToggleableOutputPin;
 use panic_halt as _;
-use va108xx_hal::{gpio::pins::PinsA, pac, prelude::*};
+use va108xx_hal::{gpio::pins::PinsA, pac, prelude::*, timer::set_up_ms_timer};
 use vorago_reb1::leds::Leds;
 
 // REB LED pin definitions. All on port A
@@ -64,23 +64,30 @@ fn main() -> ! {
             let mut led1 = pins.pa10.into_push_pull_output();
             let mut led2 = pins.pa7.into_push_pull_output();
             let mut led3 = pins.pa6.into_push_pull_output();
+            let mut delay = set_up_ms_timer(
+                &mut dp.SYSCONFIG,
+                &mut dp.IRQSEL,
+                50.mhz().into(),
+                dp.TIM0,
+                pac::Interrupt::OC0,
+            );
             for _ in 0..10 {
                 led1.set_low().ok();
                 led2.set_low().ok();
                 led3.set_low().ok();
-                cortex_m::asm::delay(5_000_000);
+                delay.delay_ms(200_u16);
                 led1.set_high().ok();
                 led2.set_high().ok();
                 led3.set_high().ok();
-                cortex_m::asm::delay(5_000_000);
+                delay.delay_ms(200_u16);
             }
             loop {
                 led1.toggle().ok();
-                cortex_m::asm::delay(5_000_000);
+                delay.delay_ms(200_u16);
                 led2.toggle().ok();
-                cortex_m::asm::delay(5_000_000);
+                delay.delay_ms(200_u16);
                 led3.toggle().ok();
-                cortex_m::asm::delay(5_000_000);
+                delay.delay_ms(200_u16);
             }
         }
         LibType::Bsp => {
@@ -90,22 +97,27 @@ fn main() -> ! {
                 pinsa.pa7.into_push_pull_output(),
                 pinsa.pa6.into_push_pull_output(),
             );
+            let mut delay = set_up_ms_timer(
+                &mut dp.SYSCONFIG,
+                &mut dp.IRQSEL,
+                50.mhz().into(),
+                dp.TIM0,
+                pac::Interrupt::OC0,
+            );
             loop {
                 for _ in 0..10 {
                     // Blink all LEDs quickly
                     for led in leds.iter_mut() {
                         led.toggle();
                     }
-                    cortex_m::asm::delay(5_000_000);
+                    delay.delay_ms(200_u16);
                 }
                 // Now use a wave pattern
                 loop {
-                    leds[0].toggle();
-                    cortex_m::asm::delay(5_000_000);
-                    leds[1].toggle();
-                    cortex_m::asm::delay(5_000_000);
-                    leds[2].toggle();
-                    cortex_m::asm::delay(5_000_000);
+                    for led in leds.iter_mut() {
+                        led.toggle();
+                        delay.delay_ms(200_u16);
+                    }
                 }
             }
         }
diff --git a/examples/max11619-adc.rs b/examples/max11619-adc.rs
index 4e97b5b..29acca3 100644
--- a/examples/max11619-adc.rs
+++ b/examples/max11619-adc.rs
@@ -14,7 +14,7 @@ use va108xx_hal::{
     prelude::*,
     spi::{Spi, SpiBase, SpiConfig, TransferConfig},
     timer::{default_ms_irq_handler, set_up_ms_timer, Delay},
-    utility::{port_mux, PortSel, Funsel}
+    utility::{port_mux, Funsel, PortSel},
 };
 use vorago_reb1::max11619::{
     max11619_externally_clocked_no_wakeup, max11619_externally_clocked_with_wakeup,
@@ -39,7 +39,7 @@ pub enum ReadMode {
 #[derive(Debug, PartialEq, Copy, Clone)]
 pub enum MuxMode {
     None,
-    PortB19to17
+    PortB19to17,
 }
 
 const EXAMPLE_MODE: ExampleMode = ExampleMode::NotUsingEoc;