Merge remote-tracking branch 'eive/eive/develop' into mueller/master

This commit is contained in:
Robin Müller 2022-02-20 18:34:25 +01:00
commit 45dc16170b
No known key found for this signature in database
GPG Key ID: 71B58F8A3CDFA9AC
31 changed files with 235 additions and 261 deletions

View File

@ -9,6 +9,7 @@ option(FSFW_HAL_ADD_LINUX "Add the Linux HAL to the sources. Requires gpiod libr
# Linux. The only exception from this is the gpiod library which requires a dedicated installation,
# but CMake is able to determine whether this library is installed with find_library.
option(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS "Add peripheral drivers for embedded Linux" ON)
option(FSFW_HAL_LINUX_ADD_LIBGPIOD "Target implements libgpiod" ON)
option(FSFW_HAL_ADD_RASPBERRY_PI "Add Raspberry Pi specific code to the sources" OFF)
option(FSFW_HAL_ADD_STM32H7 "Add the STM32H7 HAL to the sources" OFF)

View File

@ -11,7 +11,7 @@ namespace gpio {
enum Levels : uint8_t { LOW = 0, HIGH = 1, NONE = 99 };
enum Direction : uint8_t { IN = 0, OUT = 1 };
enum Direction : uint8_t { DIR_IN = 0, DIR_OUT = 1 };
enum GpioOperation { READ, WRITE };
@ -20,7 +20,7 @@ enum class GpioTypes {
GPIO_REGULAR_BY_CHIP,
GPIO_REGULAR_BY_LABEL,
GPIO_REGULAR_BY_LINE_NAME,
CALLBACK
TYPE_CALLBACK
};
static constexpr gpioId_t NO_GPIO = -1;
@ -57,7 +57,7 @@ class GpioBase {
// Can be used to cast GpioBase to a concrete child implementation
gpio::GpioTypes gpioType = gpio::GpioTypes::NONE;
std::string consumer;
gpio::Direction direction = gpio::Direction::IN;
gpio::Direction direction = gpio::Direction::DIR_IN;
gpio::Levels initValue = gpio::Levels::NONE;
};
@ -79,8 +79,8 @@ class GpiodRegularBase : public GpioBase {
class GpiodRegularByChip : public GpiodRegularBase {
public:
GpiodRegularByChip()
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, std::string(), gpio::Direction::IN,
gpio::LOW, 0) {}
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, std::string(),
gpio::Direction::DIR_IN, gpio::LOW, 0) {}
GpiodRegularByChip(std::string chipname_, int lineNum_, std::string consumer_,
gpio::Direction direction_, gpio::Levels initValue_)
@ -89,7 +89,7 @@ class GpiodRegularByChip : public GpiodRegularBase {
chipname(chipname_) {}
GpiodRegularByChip(std::string chipname_, int lineNum_, std::string consumer_)
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, consumer_, gpio::Direction::IN,
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, consumer_, gpio::Direction::DIR_IN,
gpio::LOW, lineNum_),
chipname(chipname_) {}
@ -105,7 +105,7 @@ class GpiodRegularByLabel : public GpiodRegularBase {
label(label_) {}
GpiodRegularByLabel(std::string label_, int lineNum_, std::string consumer_)
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL, consumer_, gpio::Direction::IN,
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL, consumer_, gpio::Direction::DIR_IN,
gpio::LOW, lineNum_),
label(label_) {}
@ -126,8 +126,8 @@ class GpiodRegularByLineName : public GpiodRegularBase {
lineName(lineName_) {}
GpiodRegularByLineName(std::string lineName_, std::string consumer_)
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LINE_NAME, consumer_, gpio::Direction::IN,
gpio::LOW),
: GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LINE_NAME, consumer_,
gpio::Direction::DIR_IN, gpio::LOW),
lineName(lineName_) {}
std::string lineName;
@ -137,7 +137,7 @@ class GpioCallback : public GpioBase {
public:
GpioCallback(std::string consumer, gpio::Direction direction_, gpio::Levels initValue_,
gpio::gpio_cb_t callback, void* callbackArgs)
: GpioBase(gpio::GpioTypes::CALLBACK, consumer, direction_, initValue_),
: GpioBase(gpio::GpioTypes::TYPE_CALLBACK, consumer, direction_, initValue_),
callback(callback),
callbackArgs(callbackArgs) {}

View File

@ -10,7 +10,7 @@ GyroHandlerL3GD20H::GyroHandlerL3GD20H(object_id_t objectId, object_id_t deviceC
transitionDelayMs(transitionDelayMs),
dataset(this) {
#if FSFW_HAL_L3GD20_GYRO_DEBUG == 1
debugDivider = new PeriodicOperationDivider(3);
debugDivider = new PeriodicOperationDivider(10);
#endif
}

View File

@ -13,7 +13,7 @@ MgmLIS3MDLHandler::MgmLIS3MDLHandler(object_id_t objectId, object_id_t deviceCom
dataset(this),
transitionDelay(transitionDelay) {
#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
debugDivider = new PeriodicOperationDivider(3);
debugDivider = new PeriodicOperationDivider(10);
#endif
// Set to default values right away
registers[0] = MGMLIS3MDL::CTRL_REG1_DEFAULT;
@ -264,7 +264,7 @@ ReturnValue_t MgmLIS3MDLHandler::interpretDeviceReply(DeviceCommandId_t id, cons
int16_t mgmMeasurementRawZ =
packet[MGMLIS3MDL::Z_HIGHBYTE_IDX] << 8 | packet[MGMLIS3MDL::Z_LOWBYTE_IDX];
/* Target value in microtesla */
// Target value in microtesla
float mgmX = static_cast<float>(mgmMeasurementRawX) * sensitivityFactor *
MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
float mgmY = static_cast<float>(mgmMeasurementRawY) * sensitivityFactor *
@ -462,7 +462,9 @@ ReturnValue_t MgmLIS3MDLHandler::prepareCtrlRegisterWrite() {
return RETURN_OK;
}
void MgmLIS3MDLHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {}
void MgmLIS3MDLHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
DeviceHandlerBase::doTransition(modeFrom, subModeFrom);
}
uint32_t MgmLIS3MDLHandler::getTransitionDelayMs(Mode_t from, Mode_t to) { return transitionDelay; }

View File

@ -12,7 +12,7 @@ MgmRM3100Handler::MgmRM3100Handler(object_id_t objectId, object_id_t deviceCommu
primaryDataset(this),
transitionDelay(transitionDelay) {
#if FSFW_HAL_RM3100_MGM_DEBUG == 1
debugDivider = new PeriodicOperationDivider(3);
debugDivider = new PeriodicOperationDivider(10);
#endif
}

View File

@ -9,7 +9,9 @@ target_sources(${LIB_FSFW_NAME} PRIVATE
)
if(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS)
if(FSFW_HAL_LINUX_ADD_LIBGPIOD)
add_subdirectory(gpio)
endif()
add_subdirectory(spi)
add_subdirectory(i2c)
add_subdirectory(uart)

View File

@ -74,7 +74,7 @@ ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
configureGpioByLineName(gpioConfig.first, *regularGpio);
break;
}
case (gpio::GpioTypes::CALLBACK): {
case (gpio::GpioTypes::TYPE_CALLBACK): {
auto gpioCallback = dynamic_cast<GpioCallback*>(gpioConfig.second);
if (gpioCallback->callback == nullptr) {
return GPIO_INVALID_INSTANCE;
@ -161,11 +161,11 @@ ReturnValue_t LinuxLibgpioIF::configureRegularGpio(gpioId_t gpioId, struct gpiod
consumer = regularGpio.consumer;
/* Configure direction and add a description to the GPIO */
switch (direction) {
case (gpio::OUT): {
case (gpio::DIR_OUT): {
result = gpiod_line_request_output(lineHandle, consumer.c_str(), regularGpio.initValue);
break;
}
case (gpio::IN): {
case (gpio::DIR_IN): {
result = gpiod_line_request_input(lineHandle, consumer.c_str());
break;
}
@ -326,7 +326,7 @@ ReturnValue_t LinuxLibgpioIF::checkForConflicts(GpioMap& mapToAdd) {
}
break;
}
case (gpio::GpioTypes::CALLBACK): {
case (gpio::GpioTypes::TYPE_CALLBACK): {
auto callbackGpio = dynamic_cast<GpioCallback*>(gpioConfig.second);
if (callbackGpio == nullptr) {
return GPIO_TYPE_FAILURE;
@ -366,13 +366,13 @@ ReturnValue_t LinuxLibgpioIF::checkForConflictsById(gpioId_t gpioIdToCheck,
case (gpio::GpioTypes::GPIO_REGULAR_BY_CHIP):
case (gpio::GpioTypes::GPIO_REGULAR_BY_LABEL):
case (gpio::GpioTypes::GPIO_REGULAR_BY_LINE_NAME): {
if (gpioType == gpio::GpioTypes::NONE or gpioType == gpio::GpioTypes::CALLBACK) {
if (gpioType == gpio::GpioTypes::NONE or gpioType == gpio::GpioTypes::TYPE_CALLBACK) {
eraseDuplicateDifferentType = true;
}
break;
}
case (gpio::GpioTypes::CALLBACK): {
if (gpioType != gpio::GpioTypes::CALLBACK) {
case (gpio::GpioTypes::TYPE_CALLBACK): {
if (gpioType != gpio::GpioTypes::TYPE_CALLBACK) {
eraseDuplicateDifferentType = true;
}
}

View File

@ -1,4 +1,13 @@
#include "fsfw_hal/linux/i2c/I2cComIF.h"
#include "I2cComIF.h"
#include "fsfw/FSFW.h"
#include "fsfw/serviceinterface.h"
#include "fsfw_hal/linux/UnixFileGuard.h"
#include "fsfw_hal/linux/utility.h"
#if FSFW_HAL_I2C_WIRETAPPING == 1
#include "fsfw/globalfunctions/arrayprinter.h"
#endif
#include <errno.h>
#include <fcntl.h>
@ -8,11 +17,6 @@
#include <cstring>
#include "fsfw/FSFW.h"
#include "fsfw/serviceinterface.h"
#include "fsfw_hal/linux/UnixFileGuard.h"
#include "fsfw_hal/linux/utility.h"
I2cComIF::I2cComIF(object_id_t objectId) : SystemObject(objectId) {}
I2cComIF::~I2cComIF() {}
@ -112,6 +116,11 @@ ReturnValue_t I2cComIF::sendMessage(CookieIF* cookie, const uint8_t* sendData, s
#endif
return HasReturnvaluesIF::RETURN_FAILED;
}
#if FSFW_HAL_I2C_WIRETAPPING == 1
sif::info << "Sent I2C data to bus " << deviceFile << ":" << std::endl;
arrayprinter::print(sendData, sendLen);
#endif
return HasReturnvaluesIF::RETURN_OK;
}
@ -176,6 +185,11 @@ ReturnValue_t I2cComIF::requestReceiveMessage(CookieIF* cookie, size_t requestLe
return HasReturnvaluesIF::RETURN_FAILED;
}
#if FSFW_HAL_I2C_WIRETAPPING == 1
sif::info << "I2C read bytes from bus " << deviceFile << ":" << std::endl;
arrayprinter::print(replyBuffer, requestLen);
#endif
i2cDeviceMapIter->second.replyLen = requestLen;
return HasReturnvaluesIF::RETURN_OK;
}

View File

@ -7,7 +7,7 @@
ReturnValue_t gpio::createRpiGpioConfig(GpioCookie* cookie, gpioId_t gpioId, int bcmPin,
std::string consumer, gpio::Direction direction,
int initValue) {
gpio::Levels initValue) {
if (cookie == nullptr) {
return HasReturnvaluesIF::RETURN_FAILED;
}

View File

@ -21,7 +21,8 @@ namespace gpio {
* @return
*/
ReturnValue_t createRpiGpioConfig(GpioCookie* cookie, gpioId_t gpioId, int bcmPin,
std::string consumer, gpio::Direction direction, int initValue);
std::string consumer, gpio::Direction direction,
gpio::Levels initValue);
} // namespace gpio
#endif /* BSP_RPI_GPIO_GPIORPI_H_ */

View File

@ -269,6 +269,50 @@ void UartComIF::configureBaudrate(struct termios* options, UartCookie* uartCooki
cfsetispeed(options, B460800);
cfsetospeed(options, B460800);
break;
case 500000:
cfsetispeed(options, B500000);
cfsetospeed(options, B500000);
break;
case 576000:
cfsetispeed(options, B576000);
cfsetospeed(options, B576000);
break;
case 921600:
cfsetispeed(options, B921600);
cfsetospeed(options, B921600);
break;
case 1000000:
cfsetispeed(options, B1000000);
cfsetospeed(options, B1000000);
break;
case 1152000:
cfsetispeed(options, B1152000);
cfsetospeed(options, B1152000);
break;
case 1500000:
cfsetispeed(options, B1500000);
cfsetospeed(options, B1500000);
break;
case 2000000:
cfsetispeed(options, B2000000);
cfsetospeed(options, B2000000);
break;
case 2500000:
cfsetispeed(options, B2500000);
cfsetospeed(options, B2500000);
break;
case 3000000:
cfsetispeed(options, B3000000);
cfsetospeed(options, B3000000);
break;
case 3500000:
cfsetispeed(options, B3500000);
cfsetospeed(options, B3500000);
break;
case 4000000:
cfsetispeed(options, B4000000);
cfsetospeed(options, B4000000);
break;
default:
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::warning << "UartComIF::configureBaudrate: Baudrate not supported" << std::endl;

View File

@ -1,4 +1,4 @@
#include "fsfw_hal/linux/uart/UartCookie.h"
#include "UartCookie.h"
#include <fsfw/serviceinterface.h>

View File

@ -57,6 +57,11 @@
#define FSFW_HAL_SPI_WIRETAPPING 0
#endif
// Can be used for low-level debugging of the I2C bus
#ifndef FSFW_HAL_I2C_WIRETAPPING
#define FSFW_HAL_I2C_WIRETAPPING 0
#endif
#ifndef FSFW_HAL_L3GD20_GYRO_DEBUG
#define FSFW_HAL_L3GD20_GYRO_DEBUG 0
#endif /* FSFW_HAL_L3GD20_GYRO_DEBUG */

View File

@ -1,7 +1,6 @@
#ifndef FSFW_CONTROLLER_CONTROLLERBASE_H_
#define FSFW_CONTROLLER_CONTROLLERBASE_H_
#include "fsfw/datapool/HkSwitchHelper.h"
#include "fsfw/health/HasHealthIF.h"
#include "fsfw/health/HealthHelper.h"
#include "fsfw/modes/HasModesIF.h"

View File

@ -1,6 +1,4 @@
target_sources(${LIB_FSFW_NAME}
PRIVATE
HkSwitchHelper.cpp
PoolDataSetBase.cpp
PoolEntry.cpp
target_sources(${LIB_FSFW_NAME} PRIVATE
PoolDataSetBase.cpp
PoolEntry.cpp
)

View File

@ -1,67 +0,0 @@
#include "fsfw/datapool/HkSwitchHelper.h"
#include "fsfw/ipc/QueueFactory.h"
HkSwitchHelper::HkSwitchHelper(EventReportingProxyIF* eventProxy)
: commandActionHelper(this), eventProxy(eventProxy) {
actionQueue = QueueFactory::instance()->createMessageQueue();
}
HkSwitchHelper::~HkSwitchHelper() { QueueFactory::instance()->deleteMessageQueue(actionQueue); }
ReturnValue_t HkSwitchHelper::initialize() {
ReturnValue_t result = commandActionHelper.initialize();
if (result != HasReturnvaluesIF::RETURN_OK) {
return result;
}
return result;
}
ReturnValue_t HkSwitchHelper::performOperation(uint8_t operationCode) {
CommandMessage command;
while (actionQueue->receiveMessage(&command) == HasReturnvaluesIF::RETURN_OK) {
ReturnValue_t result = commandActionHelper.handleReply(&command);
if (result == HasReturnvaluesIF::RETURN_OK) {
continue;
}
command.setToUnknownCommand();
actionQueue->reply(&command);
}
return HasReturnvaluesIF::RETURN_OK;
}
void HkSwitchHelper::stepSuccessfulReceived(ActionId_t actionId, uint8_t step) {}
void HkSwitchHelper::stepFailedReceived(ActionId_t actionId, uint8_t step,
ReturnValue_t returnCode) {
eventProxy->forwardEvent(SWITCHING_TM_FAILED, returnCode, actionId);
}
void HkSwitchHelper::dataReceived(ActionId_t actionId, const uint8_t* data, uint32_t size) {}
void HkSwitchHelper::completionSuccessfulReceived(ActionId_t actionId) {}
void HkSwitchHelper::completionFailedReceived(ActionId_t actionId, ReturnValue_t returnCode) {
eventProxy->forwardEvent(SWITCHING_TM_FAILED, returnCode, actionId);
}
ReturnValue_t HkSwitchHelper::switchHK(SerializeIF* sids, bool enable) {
// ActionId_t action = HKService::DISABLE_HK;
// if (enable) {
// action = HKService::ENABLE_HK;
// }
//
// ReturnValue_t result = commandActionHelper.commandAction(
// objects::PUS_HK_SERVICE, action, sids);
//
// if (result != HasReturnvaluesIF::RETURN_OK) {
// eventProxy->forwardEvent(SWITCHING_TM_FAILED, result);
// }
// return result;
return HasReturnvaluesIF::RETURN_OK;
}
MessageQueueIF* HkSwitchHelper::getCommandQueuePtr() { return actionQueue; }

View File

@ -1,44 +0,0 @@
#ifndef FRAMEWORK_DATAPOOL_HKSWITCHHELPER_H_
#define FRAMEWORK_DATAPOOL_HKSWITCHHELPER_H_
#include "fsfw/action/CommandsActionsIF.h"
#include "fsfw/events/EventReportingProxyIF.h"
#include "fsfw/tasks/ExecutableObjectIF.h"
// TODO this class violations separation between mission and framework
// but it is only a transitional solution until the Datapool is
// implemented decentrally
class HkSwitchHelper : public ExecutableObjectIF, public CommandsActionsIF {
public:
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::HK;
static const Event SWITCHING_TM_FAILED =
MAKE_EVENT(1, severity::LOW); //!< Commanding the HK Service failed, p1: error code, p2
//!< action: 0 disable / 1 enable
HkSwitchHelper(EventReportingProxyIF* eventProxy);
virtual ~HkSwitchHelper();
ReturnValue_t initialize();
virtual ReturnValue_t performOperation(uint8_t operationCode = 0);
ReturnValue_t switchHK(SerializeIF* sids, bool enable);
virtual void setTaskIF(PeriodicTaskIF* task_){};
protected:
virtual void stepSuccessfulReceived(ActionId_t actionId, uint8_t step);
virtual void stepFailedReceived(ActionId_t actionId, uint8_t step, ReturnValue_t returnCode);
virtual void dataReceived(ActionId_t actionId, const uint8_t* data, uint32_t size);
virtual void completionSuccessfulReceived(ActionId_t actionId);
virtual void completionFailedReceived(ActionId_t actionId, ReturnValue_t returnCode);
virtual MessageQueueIF* getCommandQueuePtr();
private:
CommandActionHelper commandActionHelper;
MessageQueueIF* actionQueue;
EventReportingProxyIF* eventProxy;
};
#endif /* FRAMEWORK_DATAPOOL_HKSWITCHHELPER_H_ */

View File

@ -47,13 +47,14 @@ LocalPoolObjectBase::LocalPoolObjectBase(object_id_t poolOwner, lp_id_t poolId,
HasLocalDataPoolIF* hkOwner = ObjectManager::instance()->get<HasLocalDataPoolIF>(poolOwner);
if (hkOwner == nullptr) {
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::error << "LocalPoolVariable: The supplied pool owner did not implement the correct "
"interface HasLocalDataPoolIF!"
<< std::endl;
sif::error << "LocalPoolVariable: The supplied pool owner 0x" << std::hex << poolOwner
<< std::dec << " did not implement the correct interface "
<< "HasLocalDataPoolIF" << std::endl;
#else
sif::printError(
"LocalPoolVariable: The supplied pool owner did not implement the correct "
"interface HasLocalDataPoolIF!\n");
"LocalPoolVariable: The supplied pool owner 0x%08x did not implement the correct "
"interface HasLocalDataPoolIF\n",
poolOwner);
#endif
return;
}

View File

@ -46,7 +46,7 @@ class StaticLocalDataSet : public LocalPoolDataSetBase {
}
private:
std::array<PoolVariableIF*, NUM_VARIABLES> poolVarList;
std::array<PoolVariableIF*, NUM_VARIABLES> poolVarList = {};
};
#endif /* FSFW_DATAPOOLLOCAL_STATICLOCALDATASET_H_ */

View File

@ -29,6 +29,7 @@ ReturnValue_t DeviceHandlerFailureIsolation::eventReceived(EventMessage* event)
switch (event->getEvent()) {
case HasModesIF::MODE_TRANSITION_FAILED:
case HasModesIF::OBJECT_IN_INVALID_MODE:
case DeviceHandlerIF::DEVICE_WANTS_HARD_REBOOT:
// We'll try a recovery as long as defined in MAX_REBOOT.
// Might cause some AssemblyBase cycles, so keep number low.
handleRecovery(event->getEvent());

View File

@ -109,6 +109,7 @@ class DeviceHandlerIF {
static const Event INVALID_DEVICE_COMMAND = MAKE_EVENT(8, severity::LOW);
static const Event MONITORING_LIMIT_EXCEEDED = MAKE_EVENT(9, severity::LOW);
static const Event MONITORING_AMBIGUOUS = MAKE_EVENT(10, severity::HIGH);
static const Event DEVICE_WANTS_HARD_REBOOT = MAKE_EVENT(11, severity::HIGH);
static const uint8_t INTERFACE_ID = CLASS_ID::DEVICE_HANDLER_IF;

View File

@ -14,13 +14,12 @@ class FailureIsolationBase : public HasReturnvaluesIF,
public HasParametersIF {
public:
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::FDIR_1;
static const Event FDIR_CHANGED_STATE =
MAKE_EVENT(1, severity::INFO); //!< FDIR has an internal state, which changed from par2
//!< (oldState) to par1 (newState).
static const Event FDIR_STARTS_RECOVERY = MAKE_EVENT(
2, severity::MEDIUM); //!< FDIR tries to restart device. Par1: event that caused recovery.
static const Event FDIR_TURNS_OFF_DEVICE = MAKE_EVENT(
3, severity::MEDIUM); //!< FDIR turns off device. Par1: event that caused recovery.
//! FDIR has an internal state, which changed from par2 (oldState) to par1 (newState).
static const Event FDIR_CHANGED_STATE = MAKE_EVENT(1, severity::INFO);
//! FDIR tries to restart device. Par1: event that caused recovery.
static const Event FDIR_STARTS_RECOVERY = MAKE_EVENT(2, severity::MEDIUM);
//! FDIR turns off device. Par1: event that caused recovery.
static const Event FDIR_TURNS_OFF_DEVICE = MAKE_EVENT(3, severity::MEDIUM);
FailureIsolationBase(object_id_t owner, object_id_t parent = objects::NO_OBJECT,
uint8_t messageDepth = 10, uint8_t parameterDomainBase = 0xF0);

View File

@ -23,19 +23,15 @@ class HasHealthIF {
static const Event HEALTH_INFO = MAKE_EVENT(6, severity::INFO);
static const Event CHILD_CHANGED_HEALTH = MAKE_EVENT(7, severity::INFO);
static const Event CHILD_PROBLEMS = MAKE_EVENT(8, severity::LOW);
static const Event OVERWRITING_HEALTH =
MAKE_EVENT(9, severity::LOW); //!< Assembly overwrites health information of children to keep
//!< satellite alive.
static const Event TRYING_RECOVERY =
MAKE_EVENT(10, severity::MEDIUM); //!< Someone starts a recovery of a component (typically
//!< power-cycle). No parameters.
static const Event RECOVERY_STEP =
MAKE_EVENT(11, severity::MEDIUM); //!< Recovery is ongoing. Comes twice during recovery. P1:
//!< 0 for the first, 1 for the second event. P2: 0
static const Event RECOVERY_DONE = MAKE_EVENT(
12,
severity::MEDIUM); //!< Recovery was completed. Not necessarily successful. No parameters.
//! Assembly overwrites health information of children to keep satellite alive.
static const Event OVERWRITING_HEALTH = MAKE_EVENT(9, severity::LOW);
//! Someone starts a recovery of a component (typically power-cycle). No parameters.
static const Event TRYING_RECOVERY = MAKE_EVENT(10, severity::MEDIUM);
//! Recovery is ongoing. Comes twice during recovery.
//! P1: 0 for the first, 1 for the second event. P2: 0
static const Event RECOVERY_STEP = MAKE_EVENT(11, severity::MEDIUM);
//! Recovery was completed. Not necessarily successful. No parameters.
static const Event RECOVERY_DONE = MAKE_EVENT(12, severity::MEDIUM);
virtual ~HasHealthIF() {}
virtual MessageQueueId_t getCommandQueue() const = 0;

View File

@ -19,32 +19,29 @@ class HasModesIF {
static const ReturnValue_t INVALID_SUBMODE = MAKE_RETURN_CODE(0x04);
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::SYSTEM_MANAGER;
static const Event CHANGING_MODE =
MAKE_EVENT(0, severity::INFO); //!< An object announces changing the mode. p1: target mode.
//!< p2: target submode
static const Event MODE_INFO = MAKE_EVENT(
1,
severity::INFO); //!< An Object announces its mode; parameter1 is mode, parameter2 is submode
//! An object announces changing the mode. p1: target mode. p2: target submode
static const Event CHANGING_MODE = MAKE_EVENT(0, severity::INFO);
//! An Object announces its mode; parameter1 is mode, parameter2 is submode
static const Event MODE_INFO = MAKE_EVENT(1, severity::INFO);
static const Event FALLBACK_FAILED = MAKE_EVENT(2, severity::HIGH);
static const Event MODE_TRANSITION_FAILED = MAKE_EVENT(3, severity::LOW);
static const Event CANT_KEEP_MODE = MAKE_EVENT(4, severity::HIGH);
static const Event OBJECT_IN_INVALID_MODE =
MAKE_EVENT(5, severity::LOW); //!< Indicates a bug or configuration failure: Object is in a
//!< mode it should never be in.
static const Event FORCING_MODE = MAKE_EVENT(
6, severity::MEDIUM); //!< The mode is changed, but for some reason, the change is forced,
//!< i.e. EXTERNAL_CONTROL ignored. p1: target mode. p2: target submode
static const Event MODE_CMD_REJECTED =
MAKE_EVENT(7, severity::LOW); //!< A mode command was rejected by the called object. Par1:
//!< called object id, Par2: return code.
//! Indicates a bug or configuration failure: Object is in a mode it should never be in.
static const Event OBJECT_IN_INVALID_MODE = MAKE_EVENT(5, severity::LOW);
//! The mode is changed, but for some reason, the change is forced, i.e. EXTERNAL_CONTROL ignored.
//! p1: target mode. p2: target submode
static const Event FORCING_MODE = MAKE_EVENT(6, severity::MEDIUM);
//! A mode command was rejected by the called object. Par1: called object id, Par2: return code.
static const Event MODE_CMD_REJECTED = MAKE_EVENT(7, severity::LOW);
static const Mode_t MODE_ON =
1; //!< The device is powered and ready to perform operations. In this mode, no commands are
//!< sent by the device handler itself, but direct commands van be commanded and will be
//!< interpreted
static const Mode_t MODE_OFF = 0; //!< The device is powered off. The only command accepted in
//!< this mode is a mode change to on.
static const Submode_t SUBMODE_NONE = 0; //!< To avoid checks against magic number "0".
//! The device is powered and ready to perform operations. In this mode, no commands are
//! sent by the device handler itself, but direct commands van be commanded and will be
//! interpreted
static const Mode_t MODE_ON = 1;
//! The device is powered off. The only command accepted in this mode is a mode change to on.
static const Mode_t MODE_OFF = 0;
//! To avoid checks against magic number "0".
static const Submode_t SUBMODE_NONE = 0;
virtual ~HasModesIF() {}
virtual MessageQueueId_t getCommandQueue() const = 0;

View File

@ -34,14 +34,14 @@ class Fuse : public SystemObject,
};
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PCDU_1;
static const Event FUSE_CURRENT_HIGH = MAKE_EVENT(
1, severity::LOW); //!< PSS detected that current on a fuse is totally out of bounds.
static const Event FUSE_WENT_OFF =
MAKE_EVENT(2, severity::LOW); //!< PSS detected a fuse that went off.
static const Event POWER_ABOVE_HIGH_LIMIT =
MAKE_EVENT(4, severity::LOW); //!< PSS detected a fuse that violates its limits.
static const Event POWER_BELOW_LOW_LIMIT =
MAKE_EVENT(5, severity::LOW); //!< PSS detected a fuse that violates its limits.
//! PSS detected that current on a fuse is totally out of bounds.
static const Event FUSE_CURRENT_HIGH = MAKE_EVENT(1, severity::LOW);
//! PSS detected a fuse that went off.
static const Event FUSE_WENT_OFF = MAKE_EVENT(2, severity::LOW);
//! PSS detected a fuse that violates its limits.
static const Event POWER_ABOVE_HIGH_LIMIT = MAKE_EVENT(4, severity::LOW);
//! PSS detected a fuse that violates its limits.
static const Event POWER_BELOW_LOW_LIMIT = MAKE_EVENT(5, severity::LOW);
typedef std::list<PowerComponentIF *> DeviceList;
Fuse(object_id_t fuseObjectId, uint8_t fuseId, sid_t variableSet, VariableIds ids,

View File

@ -6,10 +6,10 @@
class Service9TimeManagement : public PusServiceBase {
public:
static constexpr uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PUS_SERVICE_9;
static constexpr Event CLOCK_SET =
MAKE_EVENT(0, severity::INFO); //!< Clock has been set. P1: New Uptime. P2: Old Uptime
static constexpr Event CLOCK_SET_FAILURE =
MAKE_EVENT(1, severity::LOW); //!< Clock could not be set. P1: Returncode.
//!< Clock has been set. P1: New Uptime. P2: Old Uptime
static constexpr Event CLOCK_SET = MAKE_EVENT(0, severity::INFO);
//!< Clock could not be set. P1: Returncode.
static constexpr Event CLOCK_SET_FAILURE = MAKE_EVENT(1, severity::LOW);
static constexpr uint8_t CLASS_ID = CLASS_ID::PUS_SERVICE_9;

View File

@ -99,6 +99,13 @@ class Clock {
*/
static ReturnValue_t getDateAndTime(TimeOfDay_t *time);
/**
* Convert to time of day struct given the POSIX timeval struct
* @param from
* @param to
* @return
*/
static ReturnValue_t convertTimevalToTimeOfDay(const timeval *from, TimeOfDay_t *to);
/**
* Converts a time of day struct to POSIX seconds.
* @param time The time of day as input

View File

@ -1,7 +1,9 @@
#include <ctime>
#include "fsfw/ipc/MutexGuard.h"
#include "fsfw/timemanager/Clock.h"
ReturnValue_t Clock::convertUTCToTT(timeval utc, timeval *tt) {
ReturnValue_t Clock::convertUTCToTT(timeval utc, timeval* tt) {
uint16_t leapSeconds;
ReturnValue_t result = getLeapSeconds(&leapSeconds);
if (result != HasReturnvaluesIF::RETURN_OK) {
@ -31,7 +33,7 @@ ReturnValue_t Clock::setLeapSeconds(const uint16_t leapSeconds_) {
return HasReturnvaluesIF::RETURN_OK;
}
ReturnValue_t Clock::getLeapSeconds(uint16_t *leapSeconds_) {
ReturnValue_t Clock::getLeapSeconds(uint16_t* leapSeconds_) {
if (timeMutex == nullptr) {
return HasReturnvaluesIF::RETURN_FAILED;
}
@ -42,9 +44,22 @@ ReturnValue_t Clock::getLeapSeconds(uint16_t *leapSeconds_) {
return HasReturnvaluesIF::RETURN_OK;
}
ReturnValue_t Clock::convertTimevalToTimeOfDay(const timeval* from, TimeOfDay_t* to) {
struct tm* timeInfo;
timeInfo = gmtime(&from->tv_sec);
to->year = timeInfo->tm_year + 1900;
to->month = timeInfo->tm_mon + 1;
to->day = timeInfo->tm_mday;
to->hour = timeInfo->tm_hour;
to->minute = timeInfo->tm_min;
to->second = timeInfo->tm_sec;
to->usecond = from->tv_usec;
return HasReturnvaluesIF::RETURN_OK;
}
ReturnValue_t Clock::checkOrCreateClockMutex() {
if (timeMutex == nullptr) {
MutexFactory *mutexFactory = MutexFactory::instance();
MutexFactory* mutexFactory = MutexFactory::instance();
if (mutexFactory == nullptr) {
return HasReturnvaluesIF::RETURN_FAILED;
}

View File

@ -33,50 +33,47 @@ class TmStoreBackendIF : public HasParametersIF {
static const ReturnValue_t INVALID_REQUEST = MAKE_RETURN_CODE(15);
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::MEMORY;
static const Event STORE_SEND_WRITE_FAILED =
MAKE_EVENT(0, severity::LOW); //!< Initiating sending data to store failed. Low, par1:
//!< returnCode, par2: integer (debug info)
static const Event STORE_WRITE_FAILED = MAKE_EVENT(
1, severity::LOW); //!< Data was sent, but writing failed. Low, par1: returnCode, par2: 0
static const Event STORE_SEND_READ_FAILED =
MAKE_EVENT(2, severity::LOW); //!< Initiating reading data from store failed. Low, par1:
//!< returnCode, par2: 0
static const Event STORE_READ_FAILED = MAKE_EVENT(
3, severity::LOW); //!< Data was requested, but access failed. Low, par1: returnCode, par2: 0
static const Event UNEXPECTED_MSG =
MAKE_EVENT(4, severity::LOW); //!< An unexpected TM packet or data message occurred. Low,
//!< par1: 0, par2: integer (debug info)
static const Event STORING_FAILED = MAKE_EVENT(
5, severity::LOW); //!< Storing data failed. May simply be a full store. Low, par1:
//!< returnCode, par2: integer (sequence count of failed packet).
static const Event TM_DUMP_FAILED =
MAKE_EVENT(6, severity::LOW); //!< Dumping retrieved data failed. Low, par1: returnCode,
//!< par2: integer (sequence count of failed packet).
static const Event STORE_INIT_FAILED =
MAKE_EVENT(7, severity::LOW); //!< Corrupted init data or read error. Low, par1: returnCode,
//!< par2: integer (debug info)
static const Event STORE_INIT_EMPTY = MAKE_EVENT(
8, severity::INFO); //!< Store was not initialized. Starts empty. Info, parameters both zero.
static const Event STORE_CONTENT_CORRUPTED =
MAKE_EVENT(9, severity::LOW); //!< Data was read out, but it is inconsistent. Low par1:
//!< Memory address of corruption, par2: integer (debug info)
static const Event STORE_INITIALIZE =
MAKE_EVENT(10, severity::INFO); //!< Info event indicating the store will be initialized,
//!< either at boot or after IOB switch. Info. pars: 0
static const Event INIT_DONE = MAKE_EVENT(
11, severity::INFO); //!< Info event indicating the store was successfully initialized,
//!< either at boot or after IOB switch. Info. pars: 0
static const Event DUMP_FINISHED = MAKE_EVENT(
12, severity::INFO); //!< Info event indicating that dumping finished successfully. par1:
//!< Number of dumped packets. par2: APID/SSC (16bits each)
static const Event DELETION_FINISHED = MAKE_EVENT(
13, severity::INFO); //!< Info event indicating that deletion finished successfully. par1:
//!< Number of deleted packets. par2: APID/SSC (16bits each)
static const Event DELETION_FAILED = MAKE_EVENT(
14,
severity::LOW); //!< Info event indicating that something went wrong during deletion. pars: 0
static const Event AUTO_CATALOGS_SENDING_FAILED =
MAKE_EVENT(15, severity::INFO); //!< Info that the a auto catalog report failed
//! Initiating sending data to store failed. Low, par1:
//! returnCode, par2: integer (debug info)
static const Event STORE_SEND_WRITE_FAILED = MAKE_EVENT(0, severity::LOW);
//! Data was sent, but writing failed. Low, par1: returnCode, par2: 0
static const Event STORE_WRITE_FAILED = MAKE_EVENT(1, severity::LOW);
//! Initiating reading data from store failed. Low, par1: returnCode, par2: 0
static const Event STORE_SEND_READ_FAILED = MAKE_EVENT(2, severity::LOW);
//! Data was requested, but access failed. Low, par1: returnCode, par2: 0
static const Event STORE_READ_FAILED = MAKE_EVENT(3, severity::LOW);
//! An unexpected TM packet or data message occurred. Low, par1: 0, par2: integer (debug info)
static const Event UNEXPECTED_MSG = MAKE_EVENT(4, severity::LOW);
//! Storing data failed. May simply be a full store. Low, par1: returnCode,
//! par2: integer (sequence count of failed packet).
static const Event STORING_FAILED = MAKE_EVENT(5, severity::LOW);
//! Dumping retrieved data failed. Low, par1: returnCode,
//! par2: integer (sequence count of failed packet).
static const Event TM_DUMP_FAILED = MAKE_EVENT(6, severity::LOW);
//! Corrupted init data or read error. Low, par1: returnCode, par2: integer (debug info)
//! Store was not initialized. Starts empty. Info, parameters both zero.
static const Event STORE_INIT_FAILED = MAKE_EVENT(7, severity::LOW);
//! Data was read out, but it is inconsistent. Low par1:
//! Memory address of corruption, par2: integer (debug info)
static const Event STORE_INIT_EMPTY = MAKE_EVENT(8, severity::INFO);
static const Event STORE_CONTENT_CORRUPTED = MAKE_EVENT(9, severity::LOW);
//! Info event indicating the store will be initialized, either at boot or after IOB switch.
//! Info. pars: 0
static const Event STORE_INITIALIZE = MAKE_EVENT(10, severity::INFO);
//! Info event indicating the store was successfully initialized, either at boot or after
//! IOB switch. Info. pars: 0
static const Event INIT_DONE = MAKE_EVENT(11, severity::INFO);
//! Info event indicating that dumping finished successfully.
//! par1: Number of dumped packets. par2: APID/SSC (16bits each)
static const Event DUMP_FINISHED = MAKE_EVENT(12, severity::INFO);
//! Info event indicating that deletion finished successfully.
//! par1:Number of deleted packets. par2: APID/SSC (16bits each)
static const Event DELETION_FINISHED = MAKE_EVENT(13, severity::INFO);
//! Info event indicating that something went wrong during deletion. pars: 0
static const Event DELETION_FAILED = MAKE_EVENT(14, severity::LOW);
//! Info that the a auto catalog report failed
static const Event AUTO_CATALOGS_SENDING_FAILED = MAKE_EVENT(15, severity::INFO);
virtual ~TmStoreBackendIF() {}

View File

@ -172,15 +172,18 @@ ReturnValue_t TmTcBridge::storeDownlinkData(TmTcMessage* message) {
}
if (tmFifo->full()) {
if (warningSwitch) {
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::warning << "TmTcBridge::storeDownlinkData: TM downlink max. number "
"of stored packet IDs reached!"
<< std::endl;
sif::warning << "TmTcBridge::storeDownlinkData: TM downlink max. number "
"of stored packet IDs reached!"
<< std::endl;
#else
sif::printWarning(
"TmTcBridge::storeDownlinkData: TM downlink max. number "
"of stored packet IDs reached!\n");
sif::printWarning(
"TmTcBridge::storeDownlinkData: TM downlink max. number "
"of stored packet IDs reached!\n");
#endif
warningSwitch = true;
}
if (overwriteOld) {
tmFifo->retrieve(&storeId);
tmStore->deleteData(storeId);

View File

@ -72,6 +72,8 @@ class TmTcBridge : public AcceptsTelemetryIF,
virtual uint16_t getIdentifier() override;
virtual MessageQueueId_t getRequestQueue() override;
bool warningSwitch = true;
protected:
//! Cached for initialize function.
object_id_t tmStoreId = objects::NO_OBJECT;