eive-obsw/mission/payload/PayloadPcduHandler.h

#ifndef LINUX_DEVICES_PLPCDUHANDLER_H_
#define LINUX_DEVICES_PLPCDUHANDLER_H_

#include <fsfw/devicehandlers/DeviceHandlerBase.h>
#include <fsfw/globalfunctions/PeriodicOperationDivider.h>
#include <fsfw/timemanager/Countdown.h>
#include <mission/payload/payloadPcduDefinitions.h>
#include <mission/system/objects/Stack5VHandler.h>

#include "events/subsystemIdRanges.h"
#include "fsfw/FSFW.h"
#include "fsfw_hal/common/gpio/GpioIF.h"
#include "mission/memory/SdCardMountedIF.h"
#include "mission/power/defs.h"
#include "mission/system/DualLanePowerStateMachine.h"

#ifdef FSFW_OSAL_LINUX
class SpiComIF;
class SpiCookie;
#endif

/**
 * @brief Device handler for the EIVE Payload PCDU
 * @details
 * Documentation:
 * https://egit.irs.uni-stuttgart.de/eive/eive_dokumente/src/branch/master/400_Raumsegment/412_PayloaPCDUDocumentation/release/EIVE-D-421-001_PLPCDU_Documentation.pdf
 *
 * Important components:
 *  - SSR - Solid State Relay: Decouples voltages from battery
 *  - DRO - Dielectric Resonsant Oscillator: Generates modulation signal
 *  - X8: Frequency X8 Multiplicator
 *  - TX: Transmitter/Sender module. Modulates data onto carrier signal
 *  - MPA - Medium Power Amplifier
 *  - HPA - High Power Amplifier
 */
class PayloadPcduHandler : public DeviceHandlerBase {
 public:
  static constexpr uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PL_PCDU_HANDLER;
  //! [EXPORT] : [COMMENT] Could not transition properly and went back to ALL OFF
  static constexpr Event TRANSITION_BACK_TO_OFF =
      event::makeEvent(SUBSYSTEM_ID, 0, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event NEG_V_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 1, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event U_DRO_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 2, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event I_DRO_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 3, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event U_X8_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 4, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event I_X8_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 5, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event U_TX_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 6, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event I_TX_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 7, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event U_MPA_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 8, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event I_MPA_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 9, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event U_HPA_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 10, severity::MEDIUM);
  //! [EXPORT] : [COMMENT] P1: 0 -> too low, 1 -> too high P2: Float value
  static constexpr Event I_HPA_OUT_OF_BOUNDS = event::makeEvent(SUBSYSTEM_ID, 11, severity::MEDIUM);

  PayloadPcduHandler(object_id_t objectId, object_id_t comIF, CookieIF* cookie, GpioIF* gpioIF,
                     SdCardMountedIF* sdcMan, Stack5VHandler& stackHandler, bool periodicPrintout);

  void setToGoToNormalModeImmediately(bool enable);
  void enablePeriodicPrintout(bool enable, uint8_t divider);

#ifdef XIPHOS_Q7S
  static ReturnValue_t extConvAsTwoCallback(SpiComIF* comIf, SpiCookie* cookie,
                                            const uint8_t* sendData, size_t sendLen, void* args);
  static ReturnValue_t transferAsTwo(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sendData,
                                     size_t sendLen, bool tempOnly);
#endif

 private:
  static constexpr bool NO_ADC_CHECKS = false;

  enum class States : uint8_t {
    PL_PCDU_OFF,
    STACK_5V_SWITCHING,
    STACK_5V_PENDING,
    STACK_5V_CORRECT,
    // Solid State Relay, enable battery voltages VBAT0 and VBAT1. This will also switch on
    // the ADC
    ON_TRANS_SSR,
    ON_TRANS_ADC_CLOSE_ZERO
  } state = States::PL_PCDU_OFF;

  duallane::Submodes pwrSubmode = duallane::Submodes::A_SIDE;

  enum class AdcMode { EXT_CONV, INT_CONV } adcMode = AdcMode::INT_CONV;

  enum class MonitoringMode { NONE, CLOSE_TO_ZERO, NEGATIVE } monMode = MonitoringMode::NONE;

  enum class AdcState { OFF, BOOT_DELAY, SEND_SETUP, NORMAL } adcState = AdcState::OFF;

  bool goToNormalMode = false;
  plpcdu::PlPcduAdcSet adcSet;
  Stack5VHandler& stackHandler;
  std::array<uint8_t, plpcdu::MAX_ADC_REPLY_SIZE> cmdBuf = {};
  // This variable is tied to DRO +6 V voltage. Voltages, currents are monitored and the experiment
  // is shut down immediately if there is a negative voltage.
  bool transitionOk = false;
  bool commandExecuted = false;
  bool adcCmdExecuted = false;
  bool periodicPrintout = false;
  bool jsonFileInitComplete = false;
  double doubleDummy = 0.0;

  bool ssrToDroInjectionRequested = false;
  bool droToX8InjectionRequested = false;
  bool x8ToTxInjectionRequested = false;
  bool txToMpaInjectionRequested = false;
  bool mpaToHpaInjectionRequested = false;
  bool allOnInjectRequested = false;
  bool clearSetOnOffFlag = true;
  bool toNormalOneShot = true;

  PeriodicOperationDivider opDivider = PeriodicOperationDivider(5);
  uint8_t tempReadDivisor = 1;
  Countdown countdown = Countdown(5000);
  Countdown adcCountdown = Countdown(50);
  GpioIF* gpioIF;
  SdCardMountedIF* sdcMan;
  plpcdu::PlPcduParameter params;
  bool quickTransitionAlreadyCalled = true;
  uint8_t diffMask = 0;

  PoolEntry<uint16_t> channelValues = PoolEntry<uint16_t>({0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0});
  PoolEntry<float> processedValues =
      PoolEntry<float>({0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0});
  PoolEntry<float> tempC = PoolEntry<float>({0.0});

  void updateSwitchGpio(gpioId_t id, gpio::Levels level);

  void doTransition(Mode_t modeFrom, Submode_t subModeFrom) override;
  void doStartUp() override;
  void doShutDown() override;
  // Main FDIR function which goes from any PL PCDU state back to all off
  void quickTransitionBackToOff(bool startTransitionToOff, bool notifyFdir);
  ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t* id) override;
  ReturnValue_t buildTransitionDeviceCommand(DeviceCommandId_t* id) override;
  void fillCommandAndReplyMap() override;
  ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand, const uint8_t* commandData,
                                        size_t commandDataLen) override;
  ReturnValue_t scanForReply(const uint8_t* start, size_t remainingSize, DeviceCommandId_t* foundId,
                             size_t* foundLen) override;
  ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, const uint8_t* packet) override;
  uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
  ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
                                        LocalDataPoolManager& poolManager) override;
  ReturnValue_t isModeCombinationValid(Mode_t mode, Submode_t submode) override;
  ReturnValue_t getParameter(uint8_t domainId, uint8_t uniqueId, ParameterWrapper* parameterWrapper,
                             const ParameterWrapper* newValues, uint16_t startAtIndex) override;

  void handleExtConvRead(const uint8_t* bufStart);
  void handlePrintout();
  void pullAllGpiosLow(uint32_t delayBeforeSwitchingOffDro);
  void checkAdcValues();
  void handleOutOfBoundsPrintout();
  void checkJsonFileInit();
  ReturnValue_t stateMachineToNormal(Mode_t modeFrom, Submode_t subModeFrom);
  bool checkVoltage(float val, float lowerBound, float upperBound, Event event);
  bool checkCurrent(float val, float upperBound, Event event);
  void handleFailureInjection(std::string output, Event event);
  ReturnValue_t serializeFloat(uint32_t& param, float val);
  ReturnValue_t handleDoubleParamUpdate(std::string key, ParameterWrapper* parameterWrapper,
                                        const ParameterWrapper* newValues);
  LocalPoolDataSetBase* getDataSetHandle(sid_t sid) override;
};

#endif /* LINUX_DEVICES_PLPCDUHANDLER_H_ */