eive-obsw/mission/devices/SusHandler.cpp

#include <fsfw/datapool/PoolReadGuard.h>
#include <mission/devices/SusHandler.h>
#include <OBSWConfig.h>
#include <fsfw_hal/linux/spi/SpiComIF.h>

SusHandler::SusHandler(object_id_t objectId, object_id_t comIF, CookieIF * comCookie,
        LinuxLibgpioIF* gpioComIF, gpioId_t chipSelectId) :
        DeviceHandlerBase(objectId, comIF, comCookie), gpioComIF(gpioComIF), chipSelectId(
                chipSelectId), dataset(this) {
    if (comCookie == NULL) {
        sif::error << "SusHandler: Invalid com cookie" << std::endl;
    }
    if (gpioComIF == NULL) {
        sif::error << "SusHandler: Invalid GpioComIF" << std::endl;
    }
}

SusHandler::~SusHandler() {
}

ReturnValue_t SusHandler::performOperation(uint8_t counter) {

    if (counter != FIRST_WRITE) {
        DeviceHandlerBase::performOperation(counter);
        return RETURN_OK;
    }

    if (mode != MODE_NORMAL) {
        DeviceHandlerBase::performOperation(DeviceHandlerIF::SEND_WRITE);
        return RETURN_OK;
    }

    /* If device is in normale mode the communication sequence is initiated here */
    if (communicationStep == CommunicationStep::IDLE) {
        communicationStep = CommunicationStep::WRITE_SETUP;
    }

    DeviceHandlerBase::performOperation(DeviceHandlerIF::SEND_WRITE);

    return RETURN_OK;
}

ReturnValue_t SusHandler::initialize() {
    ReturnValue_t result = RETURN_OK;
    result = DeviceHandlerBase::initialize();
    if (result != RETURN_OK) {
        return result;
    }
    auto spiComIF = dynamic_cast<SpiComIF*>(communicationInterface);
    if (spiComIF == nullptr) {
        sif::debug << "SusHandler::initialize: Invalid communication interface" << std::endl;
        return ObjectManagerIF::CHILD_INIT_FAILED;
    }
    spiMutex = spiComIF->getMutex();
    if (spiMutex == nullptr) {
        sif::debug << "SusHandler::initialize: Failed to get spi mutex" << std::endl;
        return ObjectManagerIF::CHILD_INIT_FAILED;
    }
    return RETURN_OK;
}

void SusHandler::doStartUp(){
#if OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP == 1
    setMode(MODE_NORMAL);
#else
    setMode(_MODE_TO_ON);
#endif
}

void SusHandler::doShutDown(){
    setMode(_MODE_POWER_DOWN);
}

ReturnValue_t SusHandler::buildNormalDeviceCommand(
		DeviceCommandId_t * id) {

    if (communicationStep == CommunicationStep::IDLE) {
        return NOTHING_TO_SEND;
    }

    if (communicationStep == CommunicationStep::WRITE_SETUP) {
        *id = SUS::WRITE_SETUP;
        communicationStep = CommunicationStep::START_CONVERSIONS;
    }
    else if (communicationStep == CommunicationStep::START_CONVERSIONS) {
        *id = SUS::START_CONVERSIONS;
        communicationStep = CommunicationStep::READ_CONVERSIONS;
    }
    else if (communicationStep == CommunicationStep::READ_CONVERSIONS) {
        *id = SUS::READ_CONVERSIONS;
        communicationStep = CommunicationStep::IDLE;
    }
    return buildCommandFromCommand(*id, nullptr, 0);
}

ReturnValue_t SusHandler::buildTransitionDeviceCommand(
		DeviceCommandId_t * id){
    return HasReturnvaluesIF::RETURN_OK;
}

ReturnValue_t SusHandler::buildCommandFromCommand(
		DeviceCommandId_t deviceCommand, const uint8_t * commandData,
		size_t commandDataLen) {
	switch(deviceCommand) {
	case(SUS::WRITE_SETUP): {
	    /**
	     * The sun sensor ADC is shutdown when CS is pulled high, so each time requesting a
	     * measurement the setup has to be rewritten. There must also be a little delay between
	     * the transmission of the setup byte and the first conversion. Thus the conversion
	     * will be performed in an extra step.
	     * Because the chip select is driven manually by the SusHandler the SPI bus must be
	     * protected with a mutex here.
	     */
	    ReturnValue_t result = spiMutex->lockMutex(timeoutType, timeoutMs);
	    if(result == MutexIF::MUTEX_TIMEOUT) {
            sif::error << "SusHandler::buildCommandFromCommand: Mutex timeout" << std::endl;
            return ERROR_LOCK_MUTEX;
	    }
        else if(result != HasReturnvaluesIF::RETURN_OK) {
            sif::error << "SusHandler::buildCommandFromCommand: Failed to lock spi mutex"
                    << std::endl;
            return ERROR_LOCK_MUTEX;
        }

	    gpioComIF->pullLow(chipSelectId);
		cmdBuffer[0] = SUS::SETUP;
		rawPacket = cmdBuffer;
		rawPacketLen = 1;
		return RETURN_OK;
	}
	case(SUS::START_CONVERSIONS): {
	    std::memset(cmdBuffer, 0, sizeof(cmdBuffer));
 	    cmdBuffer[0] = SUS::CONVERSION;
 		rawPacket = cmdBuffer;
		rawPacketLen = 2;
		return RETURN_OK;
	}
	case(SUS::READ_CONVERSIONS): {
	    std::memset(cmdBuffer, 0, sizeof(cmdBuffer));
	    rawPacket = cmdBuffer;
	    rawPacketLen = SUS::SIZE_READ_CONVERSIONS;
	    return RETURN_OK;
	}
	default:
		return DeviceHandlerIF::COMMAND_NOT_IMPLEMENTED;
	}
	return HasReturnvaluesIF::RETURN_FAILED;
}

void SusHandler::fillCommandAndReplyMap() {
    this->insertInCommandMap(SUS::WRITE_SETUP);
    this->insertInCommandMap(SUS::START_CONVERSIONS);
    this->insertInCommandAndReplyMap(SUS::READ_CONVERSIONS, 1, &dataset, SUS::SIZE_READ_CONVERSIONS);
}

ReturnValue_t SusHandler::scanForReply(const uint8_t *start,
        size_t remainingSize, DeviceCommandId_t *foundId, size_t *foundLen) {
    *foundId = this->getPendingCommand();
    *foundLen = remainingSize;
    return HasReturnvaluesIF::RETURN_OK;
}

ReturnValue_t SusHandler::interpretDeviceReply(DeviceCommandId_t id,
        const uint8_t *packet) {
	switch (id) {
	case SUS::READ_CONVERSIONS: {
	    PoolReadGuard readSet(&dataset);
        dataset.temperatureCelcius = (*(packet) << 8 | *(packet + 1)) * 0.125;
        dataset.ain0 = (*(packet + 2) << 8 | *(packet + 3));
        dataset.ain1 = (*(packet + 4) << 8 | *(packet + 5));
        dataset.ain2 = (*(packet + 6) << 8 | *(packet + 7));
        dataset.ain3 = (*(packet + 8) << 8 | *(packet + 9));
        dataset.ain4 = (*(packet + 10) << 8 | *(packet + 11));
	    dataset.ain5 = (*(packet + 12) << 8 | *(packet + 13));
#if OBSW_VERBOSE_LEVEL >= 1 && DEBUG_SUS
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", Temperature: "
                << dataset.temperatureCelcius << " °C" << std::endl;
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", AIN0: "
                << std::dec << dataset.ain0 << std::endl;
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", AIN1: "
                << std::dec << dataset.ain1 << std::endl;
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", AIN2: "
                << std::dec << dataset.ain2 << std::endl;
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", AIN3: "
                << std::dec << dataset.ain3 << std::endl;
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", AIN4: "
                << std::dec << dataset.ain4 << std::endl;
        sif::info << "SUS object id 0x" << std::hex << this->getObjectId() << ", AIN5: "
                << std::dec << dataset.ain5 << std::endl;
#endif
        /** SUS can now be shutdown and thus the SPI bus released again */
        gpioComIF->pullHigh(chipSelectId);
        ReturnValue_t result = spiMutex->unlockMutex();
        if (result != RETURN_OK) {
            sif::error << "SusHandler::interpretDeviceReply: Failed to unlock spi mutex"
                    << std::endl;
            return ERROR_UNLOCK_MUTEX;
        }
		break;
	}
	default: {
	    sif::debug << "SusHandler::interpretDeviceReply: Unknown reply id" << std::endl;
		return DeviceHandlerIF::UNKNOWN_DEVICE_REPLY;
	}

	}
	return HasReturnvaluesIF::RETURN_OK;
}

void SusHandler::setNormalDatapoolEntriesInvalid(){

}

uint32_t SusHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo){
	return 1000;
}

ReturnValue_t SusHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
        LocalDataPoolManager& poolManager) {
    localDataPoolMap.emplace(SUS::TEMPERATURE_C, new PoolEntry<float>( { 0.0 }));
    localDataPoolMap.emplace(SUS::AIN0, new PoolEntry<uint16_t>( { 0 }));
    localDataPoolMap.emplace(SUS::AIN1, new PoolEntry<uint16_t>( { 0 }));
    localDataPoolMap.emplace(SUS::AIN2, new PoolEntry<uint16_t>( { 0 }));
    localDataPoolMap.emplace(SUS::AIN3, new PoolEntry<uint16_t>( { 0 }));
    localDataPoolMap.emplace(SUS::AIN4, new PoolEntry<uint16_t>( { 0 }));
    localDataPoolMap.emplace(SUS::AIN5, new PoolEntry<uint16_t>( { 0 }));
    return HasReturnvaluesIF::RETURN_OK;
}