eive-obsw/linux/devices/devicedefinitions/SusDefinitions.h

90 lines
3.1 KiB
C
Raw Normal View History

2021-05-03 11:59:33 +02:00
#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_SUS_H_
#define MISSION_DEVICES_DEVICEDEFINITIONS_SUS_H_
2021-05-17 19:39:35 +02:00
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
2022-01-17 15:58:27 +01:00
#include <cstdint>
2021-05-17 19:39:35 +02:00
2021-05-03 11:59:33 +02:00
namespace SUS {
2022-01-17 15:58:27 +01:00
/**
* Some MAX1227 could not be reached with frequencies around 4 MHz. Maybe this is caused by
* the decoder and buffer circuits. Thus frequency is here defined to 1 MHz.
*/
static const uint32_t MAX1227_SPI_FREQ = 1000000;
static const DeviceCommandId_t NONE = 0x0; // Set when no command is pending
static const DeviceCommandId_t WRITE_SETUP = 0x1;
/**
* This command initiates the ADC conversion for all channels including the internal
* temperature sensor.
*/
static const DeviceCommandId_t START_CONVERSIONS = 0x2;
/**
* This command reads the internal fifo which holds the temperature and the channel
* conversions.
*/
static const DeviceCommandId_t READ_CONVERSIONS = 0x3;
/**
* @brief This is the configuration byte which will be written to the setup register after
* power on.
*
* @note Bit1 (DIFFSEL1) - Bit0 (DIFFSEL0): 0b00, No byte is following the setup byte
* Bit3 (REFSEL1) - Bit2 (REFSEL0): 0b10, Internal reference, no wake-up delay
* Bit5 (CLKSEL1) - Bit4 (CLKSEL0): 0b10, Internally clocked
* Bit7 - Bit6: 0b01, Tells MAX1227 that this byte should be
* written to the setup register
*
*/
static const uint8_t SETUP = 0b01101000;
/**
* @brief This values will always be written to the ADC conversion register to specify the
* conversions to perform.
* @details Bit0: 1 - Enables temperature conversion
* Bit2 (SCAN1) and Bit1 (SCAN0): 0b00, Scans channels 0 through N
* Bit6 - Bit3 defines N: 0b0101 (N = 5)
* Bit7: Always 1. Tells the ADC that this is the conversion register.
*/
static const uint8_t CONVERSION = 0b10101001;
static const uint8_t SUS_DATA_SET_ID = READ_CONVERSIONS;
/** Size of data replies. Temperature and 6 channel convesions (AIN0 - AIN5) */
static const uint8_t SIZE_READ_CONVERSIONS = 14;
static const uint8_t MAX_CMD_SIZE = SIZE_READ_CONVERSIONS;
static const uint8_t POOL_ENTRIES = 7;
enum Max1227PoolIds : lp_id_t {
TEMPERATURE_C,
AIN0,
AIN1,
AIN2,
AIN3,
AIN4,
AIN5,
2021-05-03 11:59:33 +02:00
};
2022-01-17 15:58:27 +01:00
class SusDataset : public StaticLocalDataSet<POOL_ENTRIES> {
public:
SusDataset(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, SUS_DATA_SET_ID) {}
SusDataset(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, SUS_DATA_SET_ID)) {}
lp_var_t<float> temperatureCelcius = lp_var_t<float>(sid.objectId, TEMPERATURE_C, this);
lp_var_t<uint16_t> ain0 = lp_var_t<uint16_t>(sid.objectId, AIN0, this);
lp_var_t<uint16_t> ain1 = lp_var_t<uint16_t>(sid.objectId, AIN1, this);
lp_var_t<uint16_t> ain2 = lp_var_t<uint16_t>(sid.objectId, AIN2, this);
lp_var_t<uint16_t> ain3 = lp_var_t<uint16_t>(sid.objectId, AIN3, this);
lp_var_t<uint16_t> ain4 = lp_var_t<uint16_t>(sid.objectId, AIN4, this);
lp_var_t<uint16_t> ain5 = lp_var_t<uint16_t>(sid.objectId, AIN5, this);
};
} // namespace SUS
2021-05-03 11:59:33 +02:00
#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_SUS_H_ */