Merge remote-tracking branch 'origin/develop' into mueller/pdec_irq_handling

CMakeLists.txt

@@ -98,9 +98,30 @@ set(OBSW_ADD_ACS_BOARD
 set(OBSW_ADD_GPS_CTRL
     ${INIT_VAL}
     CACHE STRING "Add GPS controllers")
+set(OBSW_ADD_CCSDS_IP_CORES
+    1
+    CACHE STRING "Add CCSDS IP cores")
+set(OBSW_TM_TO_PTME
+    1
+    CACHE STRING "Send telemetry to PTME IP core")
+set(OBSW_TC_FROM_PDEC
+    1
+    CACHE STRING "Poll telecommand from PDEC IP core")
 set(OBSW_ADD_TCS_CTRL
     ${INIT_VAL}
     CACHE STRING "Add TCS controllers")
+set(OBSW_ADD_HEATERS
+    ${INIT_VAL}
+    CACHE STRING "Add TCS heaters")
+set(OBSW_ADD_PLOC_SUPERVISOR
+    ${INIT_VAL}
+    CACHE STRING "Add PLOC supervisor handler")
+set(OBSW_ADD_SA_DEPL
+    ${INIT_VAL}
+    CACHE STRING "Add SA deployment handler")
+set(OBSW_ADD_PLOC_MPSOC
+    ${INIT_VAL}
+    CACHE STRING "Add MPSoC handler")
 set(OBSW_ADD_ACS_CTRL
     ${INIT_VAL}
     CACHE STRING "Add ACS controller")

bsp_hosted/fsfwconfig/OBSWConfig.h.in

@@ -16,7 +16,7 @@
 debugging. */
 #define OBSW_VEBOSE_LEVEL                           1
 
-#define OBSW_USE_CCSDS_IP_CORE                      0
+#define OBSW_ADD_CCSDS_IP_CORES                     0
 // Set to 1 if all telemetry should be sent to the PTME IP Core
 #define OBSW_TM_TO_PTME                             0
 // Set to 1 if telecommands are received via the PDEC IP Core

bsp_linux_board/OBSWConfig.h.in

@@ -103,7 +103,7 @@
 /*******************************************************************/
 #cmakedefine EIVE_BUILD_GPSD_GPS_HANDLER
 
-#define OBSW_USE_CCSDS_IP_CORE                      0
+#define OBSW_ADD_CCSDS_IP_CORES                     0
 // Set to 1 if all telemetry should be sent to the PTME IP Core
 #define OBSW_TM_TO_PTME                             0
 // Set to 1 if telecommands are received via the PDEC IP Core

bsp_q7s/OBSWConfig.h.in

@@ -14,18 +14,12 @@
 /** All of the following flags should be enabled for mission code  */
 /*******************************************************************/
 
-#define OBSW_USE_CCSDS_IP_CORE                      1
-// Set to 1 if all telemetry should be sent to the PTME IP Core
-#define OBSW_TM_TO_PTME                             0
-// Set to 1 if telecommands are received via the PDEC IP Core
-#define OBSW_TC_FROM_PDEC                           0
-
 #define OBSW_ADD_GOMSPACE_PCDU                      @OBSW_ADD_GOMSPACE_PCDU@
 #define OBSW_ADD_MGT                                @OBSW_ADD_MGT@
 #define OBSW_ADD_BPX_BATTERY_HANDLER                @OBSW_ADD_BPX_BATTERY_HANDLER@
 #define OBSW_ADD_STAR_TRACKER                       @OBSW_ADD_STAR_TRACKER@
-#define OBSW_ADD_PLOC_SUPERVISOR                    1
+#define OBSW_ADD_PLOC_SUPERVISOR                    @OBSW_ADD_PLOC_SUPERVISOR@
-#define OBSW_ADD_PLOC_MPSOC                         1
+#define OBSW_ADD_PLOC_MPSOC                         @OBSW_ADD_PLOC_MPSOC@
 #define OBSW_ADD_SUN_SENSORS                        @OBSW_ADD_SUN_SENSORS@
 #define OBSW_ADD_SUS_BOARD_ASS                      @OBSW_ADD_SUS_BOARD_ASS@
 #define OBSW_ADD_ACS_BOARD                          @OBSW_ADD_ACS_BOARD@
@@ -34,11 +28,18 @@
 #define OBSW_ADD_TCS_CTRL                           @OBSW_ADD_TCS_CTRL@
 #define OBSW_ADD_RW                                 @OBSW_ADD_RW@
 #define OBSW_ADD_RTD_DEVICES                        @OBSW_ADD_RTD_DEVICES@
+#define OBSW_ADD_SA_DEPL						    @OBSW_ADD_SA_DEPL@
 #define OBSW_ADD_SCEX_DEVICE                        @OBSW_ADD_SCEX_DEVICE@
+#define OBSW_ADD_HEATERS							@OBSW_ADD_HEATERS@
 #define OBSW_ADD_TMP_DEVICES                        @OBSW_ADD_TMP_DEVICES@
 #define OBSW_ADD_RAD_SENSORS                        @OBSW_ADD_RAD_SENSORS@
 #define OBSW_ADD_PL_PCDU                            @OBSW_ADD_PL_PCDU@
 #define OBSW_ADD_SYRLINKS                           @OBSW_ADD_SYRLINKS@
+#define OBSW_ADD_CCSDS_IP_CORES                     @OBSW_ADD_CCSDS_IP_CORES@
+// Set to 1 if all telemetry should be sent to the PTME IP Core
+#define OBSW_TM_TO_PTME                             @OBSW_TM_TO_PTME@
+// Set to 1 if telecommands are received via the PDEC IP Core
+#define OBSW_TC_FROM_PDEC                           @OBSW_TC_FROM_PDEC@
 #define OBSW_ENABLE_SYRLINKS_TRANSMIT_TIMEOUT       0
 
 // Configuration parameter which causes the core controller to try to keep at least one SD card

bsp_q7s/boardtest/Q7STestTask.cpp

@@ -75,8 +75,10 @@ ReturnValue_t Q7STestTask::performOneShotAction() {
   if (doTestProtHandler) {
     testProtHandler();
   }
-  FsOpCodes opCode = FsOpCodes::CREATE_EMPTY_FILE_IN_TMP;
+  if (DO_TEST_FS_HANDLER) {
-  testFileSystemHandlerDirect(opCode);
+    FsOpCodes opCode = FsOpCodes::CREATE_EMPTY_FILE_IN_TMP;
+    testFileSystemHandlerDirect(opCode);
+  }
   return TestTask::performOneShotAction();
 }
 

bsp_q7s/boardtest/Q7STestTask.h

@@ -18,6 +18,7 @@ class Q7STestTask : public TestTask {
   bool doTestScratchApi = false;
   static constexpr bool DO_TEST_GOMSPACE_API = false;
   static constexpr bool DO_TEST_GOMSPACE_GET_CONFIG = false;
+  static constexpr bool DO_TEST_FS_HANDLER = false;
   bool doTestGpsShm = false;
   bool doTestGpsSocket = false;
   bool doTestProtHandler = false;

bsp_q7s/callbacks/rwSpiCallback.cpp

@@ -41,19 +41,19 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
   uint8_t writeSize = 0;
 
   gpioId_t gpioId = cookie->getChipSelectPin();
-  GpioIF* gpioIF = comIf->getGpioInterface();
+  GpioIF& gpioIF = comIf->getGpioInterface();
   MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
   uint32_t timeoutMs = 0;
   MutexIF* mutex = comIf->getCsMutex();
   cookie->getMutexParams(timeoutType, timeoutMs);
-  if (mutex == nullptr or gpioIF == nullptr) {
+  if (mutex == nullptr) {
     sif::debug << "rwSpiCallback::spiCallback: Mutex or GPIO interface invalid" << std::endl;
     return returnvalue::FAILED;
   }
 
   int fileDescriptor = 0;
   const std::string& dev = comIf->getSpiDev();
-  result = openSpi(dev, O_RDWR, gpioIF, gpioId, mutex, timeoutType, timeoutMs, fileDescriptor);
+  result = openSpi(dev, O_RDWR, &gpioIF, gpioId, mutex, timeoutType, timeoutMs, fileDescriptor);
   if (result != returnvalue::OK) {
     return result;
   }
@@ -75,7 +75,7 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
 
   if (write(fileDescriptor, writeBuffer, writeSize) != static_cast<ssize_t>(writeSize)) {
     sif::error << "rwSpiCallback::spiCallback: Write failed!" << std::endl;
-    closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+    closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
     return RwHandler::SPI_WRITE_FAILURE;
   }
 
@@ -100,7 +100,7 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
     }
     if (write(fileDescriptor, writeBuffer, writeSize) != static_cast<ssize_t>(writeSize)) {
       sif::error << "rwSpiCallback::spiCallback: Write failed!" << std::endl;
-      closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+      closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
       return RwHandler::SPI_WRITE_FAILURE;
     }
     idx++;
@@ -112,14 +112,14 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
 
   if (write(fileDescriptor, writeBuffer, writeSize) != static_cast<ssize_t>(writeSize)) {
     sif::error << "rwSpiCallback::spiCallback: Write failed!" << std::endl;
-    closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+    closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
     return RwHandler::SPI_WRITE_FAILURE;
   }
 
   uint8_t* rxBuf = nullptr;
   result = comIf->getReadBuffer(cookie->getSpiAddress(), &rxBuf);
   if (result != returnvalue::OK) {
-    closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+    closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
     return result;
   }
 
@@ -127,9 +127,9 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
 
   // There must be a delay of at least 20 ms after sending the command.
   // Delay for 70 ms here and release the SPI bus for that duration.
-  closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+  closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
   usleep(RwDefinitions::SPI_REPLY_DELAY);
-  result = openSpi(dev, O_RDWR, gpioIF, gpioId, mutex, timeoutType, timeoutMs, fileDescriptor);
+  result = openSpi(dev, O_RDWR, &gpioIF, gpioId, mutex, timeoutType, timeoutMs, fileDescriptor);
   if (result != returnvalue::OK) {
     return result;
   }
@@ -142,13 +142,13 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
   for (int idx = 0; idx < 10; idx++) {
     if (read(fileDescriptor, &byteRead, 1) != 1) {
       sif::error << "rwSpiCallback::spiCallback: Read failed" << std::endl;
-      closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+      closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
       return RwHandler::SPI_READ_FAILURE;
     }
     if (idx == 0) {
       if (byteRead != FLAG_BYTE) {
         sif::error << "Invalid data, expected start marker" << std::endl;
-        closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+        closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
         return RwHandler::NO_START_MARKER;
       }
     }
@@ -159,7 +159,7 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
 
     if (idx == 9) {
       sif::error << "rwSpiCallback::spiCallback: Empty frame timeout" << std::endl;
-      closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+      closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
       return RwHandler::NO_REPLY;
     }
   }
@@ -199,7 +199,7 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
         continue;
       } else {
         sif::error << "rwSpiCallback::spiCallback: Invalid substitute" << std::endl;
-        closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+        closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
         result = RwHandler::INVALID_SUBSTITUTE;
         break;
       }
@@ -233,7 +233,7 @@ ReturnValue_t spiCallback(SpiComIF* comIf, SpiCookie* cookie, const uint8_t* sen
 
   cookie->setTransferSize(decodedFrameLen);
 
-  closeSpi(fileDescriptor, gpioId, gpioIF, mutex);
+  closeSpi(fileDescriptor, gpioId, &gpioIF, mutex);
 
   return result;
 }

bsp_q7s/core/CoreController.cpp

@@ -82,6 +82,12 @@ void CoreController::performControlOperation() {
   sdStateMachine();
   performMountedSdCardOperations();
   if (sdCardCheckCd.hasTimedOut()) {
+    if (shortSdCardCdCounter < 2) {
+      shortSdCardCdCounter++;
+    }
+    if (shortSdCardCdCounter == 2) {
+      sdCardCheckCd.setTimeout(DEFAULT_SD_CARD_CHECK_TIMEOUT);
+    }
     performSdCardCheck();
     sdCardCheckCd.resetTimer();
   }

bsp_q7s/core/CoreController.h

@@ -70,6 +70,9 @@ class CoreController : public ExtendedControllerBase {
   static constexpr char CHIP_1_COPY_0_MOUNT_DIR[] = "/tmp/mntupdate-xdi-qspi1-nom-rootfs";
   static constexpr char CHIP_1_COPY_1_MOUNT_DIR[] = "/tmp/mntupdate-xdi-qspi1-gold-rootfs";
 
+  static constexpr dur_millis_t INIT_SD_CARD_CHECK_TIMEOUT = 5000;
+  static constexpr dur_millis_t DEFAULT_SD_CARD_CHECK_TIMEOUT = 60000;
+
   static constexpr ActionId_t LIST_DIRECTORY_INTO_FILE = 0;
   static constexpr ActionId_t SWITCH_REBOOT_FILE_HANDLING = 5;
   static constexpr ActionId_t RESET_REBOOT_COUNTERS = 6;
@@ -210,6 +213,8 @@ class CoreController : public ExtendedControllerBase {
   RebootFile rebootFile = {};
   std::string currMntPrefix;
   bool performOneShotSdCardOpsSwitch = false;
+  uint8_t shortSdCardCdCounter = 0;
+  Countdown sdCardCheckCd = Countdown(INIT_SD_CARD_CHECK_TIMEOUT);
 
   /**
    * Index 0: Chip 0 Copy 0
@@ -229,7 +234,7 @@ class CoreController : public ExtendedControllerBase {
 
   ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
                                         LocalDataPoolManager& poolManager) override;
-  Countdown sdCardCheckCd = Countdown(120000);
+
   LocalPoolDataSetBase* getDataSetHandle(sid_t sid) override;
   ReturnValue_t checkModeCommand(Mode_t mode, Submode_t submode, uint32_t* msToReachTheMode);
   void performMountedSdCardOperations();

bsp_q7s/core/InitMission.cpp

@@ -73,6 +73,7 @@ void initmission::initTasks() {
   if (result != returnvalue::OK) {
     initmission::printAddObjectError("CORE_CTRL", objects::CORE_CONTROLLER);
   }
+#if OBSW_ADD_SA_DEPL == 1
   // Could add this to the core controller but the core controller does so many thing that I would
   // prefer to have the solar array deployment in a seprate task.
   PeriodicTaskIF* solarArrayDeplTask = factory->createPeriodicTask(
@@ -81,6 +82,7 @@ void initmission::initTasks() {
   if (result != returnvalue::OK) {
     initmission::printAddObjectError("SOLAR_ARRAY_DEPL", objects::SOLAR_ARRAY_DEPL_HANDLER);
   }
+#endif
 
   /* TMTC Distribution */
   PeriodicTaskIF* tmTcDistributor = factory->createPeriodicTask(
@@ -117,7 +119,7 @@ void initmission::initTasks() {
   }
 #endif
 
-#if OBSW_USE_CCSDS_IP_CORE == 1
+#if OBSW_ADD_CCSDS_IP_CORES == 1
   PeriodicTaskIF* ccsdsHandlerTask = factory->createPeriodicTask(
       "CCSDS_HANDLER", 50, PeriodicTaskIF::MINIMUM_STACK_SIZE, 2.0, missedDeadlineFunc);
   result = ccsdsHandlerTask->addComponent(objects::CCSDS_HANDLER);
@@ -134,7 +136,7 @@ void initmission::initTasks() {
   if (result != returnvalue::OK) {
     initmission::printAddObjectError("PDEC Handler", objects::PDEC_HANDLER);
   }
-#endif /* OBSW_USE_CCSDS_IP_CORE == 1 */
+#endif /* OBSW_ADD_CCSDS_IP_CORE == 1 */
 
 #if OBSW_ADD_CFDP_COMPONENTS == 1
   PeriodicTaskIF* cfdpTask = factory->createPeriodicTask(
@@ -234,10 +236,12 @@ void initmission::initTasks() {
     initmission::printAddObjectError("THERMAL_CONTROLLER", objects::THERMAL_CONTROLLER);
   }
 #endif
+#if OBSW_ADD_HEATERS == 1
   result = tcsSystemTask->addComponent(objects::HEATER_HANDLER);
   if (result != returnvalue::OK) {
     initmission::printAddObjectError("HEATER_HANDLER", objects::HEATER_HANDLER);
   }
+#endif
 
 #if OBSW_ADD_STAR_TRACKER == 1
   PeriodicTaskIF* strHelperTask = factory->createPeriodicTask(
@@ -307,13 +311,15 @@ void initmission::initTasks() {
   tmtcPollingTask->startTask();
 #endif
 
-#if OBSW_USE_CCSDS_IP_CORE == 1
+#if OBSW_ADD_CCSDS_IP_CORES == 1
   ccsdsHandlerTask->startTask();
   pdecHandlerTask->startTask();
-#endif /* OBSW_USE_CCSDS_IP_CORE == 1 */
+#endif /* OBSW_ADD_CCSDS_IP_CORES == 1 */
 
-  sysCtrlTask->startTask();
+  // sysCtrlTask->startTask();
+#if OBSW_ADD_SA_DEPL == 1
   solarArrayDeplTask->startTask();
+#endif
 
   taskStarter(pstTasks, "PST task vector");
   taskStarter(pusTasks, "PUS task vector");
@@ -340,7 +346,9 @@ void initmission::initTasks() {
   tcsPollingTask->startTask();
   tcsTask->startTask();
 #endif /* OBSW_ADD_RTD_DEVICES == 1 */
-  tcsSystemTask->startTask();
+  if (not tcsSystemTask->isEmpty()) {
+    tcsSystemTask->startTask();
+  }
 #if OBSW_ADD_PLOC_SUPERVISOR == 1
   supvHelperTask->startTask();
 #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */

bsp_q7s/core/ObjectFactory.cpp

@@ -145,10 +145,8 @@ void ObjectFactory::createCommunicationInterfaces(LinuxLibgpioIF** gpioComIF, Ua
   new CspComIF(objects::CSP_COM_IF);
   *i2cComIF = new I2cComIF(objects::I2C_COM_IF);
   *uartComIF = new UartComIF(objects::UART_COM_IF);
-  *spiMainComIF = new SpiComIF(objects::SPI_MAIN_COM_IF, q7s::SPI_DEFAULT_DEV, *gpioComIF);
+  *spiMainComIF = new SpiComIF(objects::SPI_MAIN_COM_IF, q7s::SPI_DEFAULT_DEV, **gpioComIF);
-  *spiRWComIF = new SpiComIF(objects::SPI_RW_COM_IF, q7s::SPI_RW_DEV, *gpioComIF);
+  *spiRWComIF = new SpiComIF(objects::SPI_RW_COM_IF, q7s::SPI_RW_DEV, **gpioComIF);
-  /* Adding gpios for chip select decoding to the gpioComIf */
-  q7s::gpioCallbacks::initSpiCsDecoder(*gpioComIF);
 }
 
 void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher) {
@@ -193,8 +191,11 @@ void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchI
 #endif
 }
 
-void ObjectFactory::createRadSensorComponent(LinuxLibgpioIF* gpioComIF) {
+ReturnValue_t ObjectFactory::createRadSensorComponent(LinuxLibgpioIF* gpioComIF) {
   using namespace gpio;
+  if(gpioComIF == nullptr) {
+	  return returnvalue::FAILED;
+  }
   GpioCookie* gpioCookieRadSensor = new GpioCookie;
   std::stringstream consumer;
   consumer << "0x" << std::hex << objects::RAD_SENSOR;
@@ -220,6 +221,7 @@ void ObjectFactory::createRadSensorComponent(LinuxLibgpioIF* gpioComIF) {
 #if OBSW_DEBUG_RAD_SENSOR == 1
   radSensor->enablePeriodicDataPrint(true);
 #endif
+  return returnvalue::OK;
 }
 
 void ObjectFactory::createAcsBoardComponents(LinuxLibgpioIF* gpioComIF, UartComIF* uartComIF,

bsp_q7s/core/ObjectFactory.h

@@ -26,7 +26,7 @@ void createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher
 void createPlPcduComponents(LinuxLibgpioIF* gpioComIF, SpiComIF* spiComIF,
                             PowerSwitchIF* pwrSwitcher);
 void createTmpComponents();
-void createRadSensorComponent(LinuxLibgpioIF* gpioComIF);
+ReturnValue_t createRadSensorComponent(LinuxLibgpioIF* gpioComIF);
 void createAcsBoardComponents(LinuxLibgpioIF* gpioComIF, UartComIF* uartComIF,
                               PowerSwitchIF* pwrSwitcher);
 void createHeaterComponents(GpioIF* gpioIF, PowerSwitchIF* pwrSwitcher, HealthTableIF* healthTable);

bsp_q7s/em/emObjectFactory.cpp

@@ -1,3 +1,4 @@
+#include <bsp_q7s/callbacks/q7sGpioCallbacks.h>
 #include <fsfw/health/HealthTableIF.h>
 #include <fsfw/power/DummyPowerSwitcher.h>
 
@@ -24,6 +25,9 @@ void ObjectFactory::produce(void* args) {
   I2cComIF* i2cComIF = nullptr;
   SpiComIF* spiRwComIF = nullptr;
   createCommunicationInterfaces(&gpioComIF, &uartComIF, &spiMainComIF, &i2cComIF, &spiRwComIF);
+  /* Adding gpios for chip select decoding to the gpioComIf */
+  q7s::gpioCallbacks::initSpiCsDecoder(gpioComIF);
+  gpioCallbacks::disableAllDecoder(gpioComIF);
 
   // Hardware is usually not connected to EM, so we need to create dummies which replace lower
   // level components.
@@ -33,8 +37,8 @@ void ObjectFactory::produce(void* args) {
 
   new CoreController(objects::CORE_CONTROLLER);
 
-  gpioCallbacks::disableAllDecoder(gpioComIF);
   PowerSwitchIF* pwrSwitcher = new DummyPowerSwitcher(objects::PCDU_HANDLER, 18, 0);
+  static_cast<void>(pwrSwitcher);
 
   // Regular FM code, does not work for EM if the hardware is not connected
   // createPcduComponents(gpioComIF, &pwrSwitcher);
@@ -44,19 +48,24 @@ void ObjectFactory::produce(void* args) {
   // createRtdComponents(q7s::SPI_DEFAULT_DEV, gpioComIF, pwrSwitcher, spiMainComIF);
   // createTmpComponents();
   // createSolarArrayDeploymentComponents();
-  createRadSensorComponent(gpioComIF);
+  // createPayloadComponents(gpioComIF);
+  // createHeaterComponents(gpioComIF, pwrSwitcher, healthTable);
+
+  // TODO: Careful! Switching this on somehow messes with the communication with the ProASIC
+  //       and will cause xsc_boot_copy commands to always boot to 0 0
+  // createRadSensorComponent(gpioComIF);
 
 #if OBSW_ADD_ACS_BOARD == 1
   createAcsBoardComponents(gpioComIF, uartComIF, pwrSwitcher);
 #endif
-  createHeaterComponents(gpioComIF, pwrSwitcher, healthTable);
-
-  createPayloadComponents(gpioComIF);
 
 #if OBSW_ADD_MGT == 1
   createImtqComponents(pwrSwitcher);
 #endif
+
+#if OBSW_ADD_RW == 1
   createReactionWheelComponents(gpioComIF, pwrSwitcher);
+#endif
 
 #if OBSW_ADD_BPX_BATTERY_HANDLER == 1
   createBpxBatteryComponent();
@@ -65,9 +74,9 @@ void ObjectFactory::produce(void* args) {
 #if OBSW_ADD_STAR_TRACKER == 1
   createStrComponents(pwrSwitcher);
 #endif /* OBSW_ADD_STAR_TRACKER == 1 */
-#if OBSW_USE_CCSDS_IP_CORE == 1
+#if OBSW_ADD_CCSDS_IP_CORES == 1
   createCcsdsComponents(gpioComIF);
-#endif /* OBSW_USE_CCSDS_IP_CORE == 1 */
+#endif /* OBSW_ADD_CCSDS_IP_CORES == 1 */
   /* Test Task */
 #if OBSW_ADD_TEST_CODE == 1
   createTestComponents(gpioComIF);
@@ -76,7 +85,5 @@ void ObjectFactory::produce(void* args) {
   createScexComponents(q7s::UART_SCEX_DEV, pwrSwitcher, *SdCardManager::instance(), true,
                        std::nullopt);
 #endif
-
-  createMiscComponents();
   createAcsController();
 }

bsp_q7s/fmObjectFactory.cpp

@@ -1,3 +1,4 @@
+#include <bsp_q7s/callbacks/q7sGpioCallbacks.h>
 #include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
 
 #include "OBSWConfig.h"
@@ -23,10 +24,11 @@ void ObjectFactory::produce(void* args) {
   PowerSwitchIF* pwrSwitcher = nullptr;
   SpiComIF* spiRwComIF = nullptr;
   createCommunicationInterfaces(&gpioComIF, &uartComIF, &spiMainComIF, &i2cComIF, &spiRwComIF);
-  createTmpComponents();
+  /* Adding gpios for chip select decoding to the gpioComIf */
-  new CoreController(objects::CORE_CONTROLLER);
+  q7s::gpioCallbacks::initSpiCsDecoder(gpioComIF);
-
   gpioCallbacks::disableAllDecoder(gpioComIF);
+
+  new CoreController(objects::CORE_CONTROLLER);
   createPcduComponents(gpioComIF, &pwrSwitcher);
   createRadSensorComponent(gpioComIF);
   createSunSensorComponents(gpioComIF, spiMainComIF, pwrSwitcher, q7s::SPI_DEFAULT_DEV);
@@ -55,9 +57,9 @@ void ObjectFactory::produce(void* args) {
 #if OBSW_ADD_STAR_TRACKER == 1
   createStrComponents(pwrSwitcher);
 #endif /* OBSW_ADD_STAR_TRACKER == 1 */
-#if OBSW_USE_CCSDS_IP_CORE == 1
+#if OBSW_ADD_CCSDS_IP_CORES == 1
   createCcsdsComponents(gpioComIF);
-#endif /* OBSW_USE_CCSDS_IP_CORE == 1 */
+#endif /* OBSW_ADD_CCSDS_IP_CORES == 1 */
 
 #if OBSW_ADD_SCEX_DEVICE == 1
   createScexComponents(q7s::UART_SCEX_DEV, pwrSwitcher, *SdCardManager::instance(), false,

bsp_te0720_1cfa/InitMission.cpp

@@ -107,7 +107,7 @@ void initmission::initTasks() {
   }
 #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */
 
-#if OBSW_USE_CCSDS_IP_CORE == 1
+#if OBSW_ADD_CCSDS_IP_CORE == 1
   PeriodicTaskIF* ccsdsHandlerTask = factory->createPeriodicTask(
       "CCSDS_HANDLER", 50, PeriodicTaskIF::MINIMUM_STACK_SIZE, 2.0, missedDeadlineFunc);
   result = ccsdsHandlerTask->addComponent(objects::CCSDS_HANDLER);
@@ -124,7 +124,7 @@ void initmission::initTasks() {
   if (result != returnvalue::OK) {
     initmission::printAddObjectError("PDEC Handler", objects::PDEC_HANDLER);
   }
-#endif /* OBSW_USE_CCSDS_IP_CORE == 1 */
+#endif /* OBSW_ADD_CCSDS_IP_CORE == 1 */
 
   auto taskStarter = [](std::vector<PeriodicTaskIF*>& taskVector, std::string name) {
     for (const auto& task : taskVector) {
@@ -140,10 +140,10 @@ void initmission::initTasks() {
   tmtcDistributor->startTask();
   tmtcBridgeTask->startTask();
   tmtcPollingTask->startTask();
-#if OBSW_USE_CCSDS_IP_CORE == 1
+#if OBSW_ADD_CCSDS_IP_CORE == 1
   pdecHandlerTask->startTask();
   ccsdsHandlerTask->startTask();
-#endif /* #if OBSW_USE_CCSDS_IP_CORE == 1 */
+#endif /* #if OBSW_ADD_CCSDS_IP_CORE == 1 */
 #if OBSW_ADD_PLOC_SUPERVISOR == 1
   supvHelperTask->startTask();
 #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */

bsp_te0720_1cfa/OBSWConfig.h.in

@@ -13,7 +13,7 @@
 /** All of the following flags should be enabled for mission code  */
 /*******************************************************************/
 
-#define OBSW_USE_CCSDS_IP_CORE                      0
+#define OBSW_ADD_CCSDS_IP_CORE                      0
 // Set to 1 if all telemetry should be sent to the PTME IP Core
 #define OBSW_TM_TO_PTME                             0
 // Set to 1 if telecommands are received via the PDEC IP Core

common/config/devConf.h

@@ -55,7 +55,7 @@ namespace uart {
 
 static constexpr size_t HYPERION_GPS_REPLY_MAX_BUFFER = 1024;
 static constexpr UartBaudRate SYRLINKS_BAUD = UartBaudRate::RATE_38400;
-static constexpr UartBaudRate SCEX_BAUD = UartBaudRate::RATE_57600;
+static constexpr UartBaudRate SCEX_BAUD = UartBaudRate::RATE_38400;
 static constexpr UartBaudRate GNSS_BAUD = UartBaudRate::RATE_9600;
 static constexpr UartBaudRate PLOC_MPSOC_BAUD = UartBaudRate::RATE_115200;
 static constexpr UartBaudRate PLOC_SUPV_BAUD = UartBaudRate::RATE_115200;

fsfw

@@ -1 +1 @@
-Subproject commit 1f05e6b297af8a6d310394e959c4d0cf13632831
+Subproject commit 1b7e94d718ba8f526dd53324d33d0e577cbfc81b

linux/devices/ScexUartReader.cpp

@@ -118,10 +118,7 @@ ReturnValue_t ScexUartReader::initializeInterface(CookieIF *cookie) {
   tty.c_cc[VTIME] = 0;
   tty.c_cc[VMIN] = 0;
 
-  // The SCEX experiment has a fixed baud rate.
+  uart::setBaudrate(tty, uartCookie->getBaudrate());
-  if (cfsetispeed(&tty, B38400) != 0) {
-    sif::warning << "ScexUartReader::initializeInterface: Setting baud rate failed" << std::endl;
-  }
   if (tcsetattr(serialPort, TCSANOW, &tty) != 0) {
     sif::warning << "ScexUartReader::initializeInterface: tcsetattr call failed with error ["
                  << errno << ", " << strerror(errno) << std::endl;

linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp

@@ -460,20 +460,18 @@ ReturnValue_t pst::pstI2c(FixedTimeslotTaskIF *thisSequence) {
 ReturnValue_t pst::pstUart(FixedTimeslotTaskIF *thisSequence) {
   // Length of a communication cycle
   uint32_t length = thisSequence->getPeriodMs();
-  bool uartPstEmpty = true;
+  static_cast<void>(length);
-
 #if OBSW_ADD_PLOC_MPSOC == 1
-  uartPstEmpty = false;
   thisSequence->addSlot(objects::PLOC_MPSOC_HANDLER, length * 0,
                         DeviceHandlerIF::PERFORM_OPERATION);
   thisSequence->addSlot(objects::PLOC_MPSOC_HANDLER, length * 0.2, DeviceHandlerIF::SEND_WRITE);
   thisSequence->addSlot(objects::PLOC_MPSOC_HANDLER, length * 0.4, DeviceHandlerIF::GET_WRITE);
   thisSequence->addSlot(objects::PLOC_MPSOC_HANDLER, length * 0.6, DeviceHandlerIF::SEND_READ);
   thisSequence->addSlot(objects::PLOC_MPSOC_HANDLER, length * 0.8, DeviceHandlerIF::GET_READ);
-#endif
-
   thisSequence->addSlot(objects::PLOC_MEMORY_DUMPER, length * 0,
                         DeviceHandlerIF::PERFORM_OPERATION);
+#endif
+
 #if OBSW_ADD_PLOC_SUPERVISOR == 1
   thisSequence->addSlot(objects::PLOC_SUPERVISOR_HANDLER, length * 0,
                         DeviceHandlerIF::PERFORM_OPERATION);
@@ -485,7 +483,6 @@ ReturnValue_t pst::pstUart(FixedTimeslotTaskIF *thisSequence) {
 #endif
 
 #if OBSW_ADD_SYRLINKS == 1
-  uartPstEmpty = false;
   thisSequence->addSlot(objects::SYRLINKS_HK_HANDLER, length * 0,
                         DeviceHandlerIF::PERFORM_OPERATION);
   thisSequence->addSlot(objects::SYRLINKS_HK_HANDLER, length * 0.2, DeviceHandlerIF::SEND_WRITE);
@@ -495,22 +492,13 @@ ReturnValue_t pst::pstUart(FixedTimeslotTaskIF *thisSequence) {
 #endif
 
 #if OBSW_ADD_STAR_TRACKER == 1
-  uartPstEmpty = false;
   thisSequence->addSlot(objects::STAR_TRACKER, length * 0, DeviceHandlerIF::PERFORM_OPERATION);
   thisSequence->addSlot(objects::STAR_TRACKER, length * 0.2, DeviceHandlerIF::SEND_WRITE);
   thisSequence->addSlot(objects::STAR_TRACKER, length * 0.4, DeviceHandlerIF::GET_WRITE);
   thisSequence->addSlot(objects::STAR_TRACKER, length * 0.6, DeviceHandlerIF::SEND_READ);
   thisSequence->addSlot(objects::STAR_TRACKER, length * 0.8, DeviceHandlerIF::GET_READ);
 #endif
-  static_cast<void>(length);
+  return thisSequence->checkSequence();
-  if (uartPstEmpty) {
-    return returnvalue::OK;
-  }
-  if (thisSequence->checkSequence() != returnvalue::OK) {
-    sif::error << "UART PST initialization failed" << std::endl;
-    return returnvalue::FAILED;
-  }
-  return returnvalue::OK;
 }
 
 ReturnValue_t pst::pstGompaceCan(FixedTimeslotTaskIF *thisSequence) {

mission/devices/GyroADIS1650XHandler.cpp

@@ -422,12 +422,12 @@ ReturnValue_t GyroADIS1650XHandler::spiSendCallback(SpiComIF *comIf, SpiCookie *
       cookie->setTransferSize(2);
 
       gpioId_t gpioId = cookie->getChipSelectPin();
-      GpioIF *gpioIF = comIf->getGpioInterface();
+      GpioIF& gpioIF = comIf->getGpioInterface();
       MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
       uint32_t timeoutMs = 0;
       MutexIF *mutex = comIf->getCsMutex();
       cookie->getMutexParams(timeoutType, timeoutMs);
-      if (mutex == nullptr or gpioIF == nullptr) {
+      if (mutex == nullptr) {
 #if OBSW_VERBOSE_LEVEL >= 1
         sif::warning << "GyroADIS16507Handler::spiSendCallback: "
                         "Mutex or GPIO interface invalid"
@@ -453,7 +453,7 @@ ReturnValue_t GyroADIS1650XHandler::spiSendCallback(SpiComIF *comIf, SpiCookie *
       while (idx < sendLen) {
         // Pull SPI CS low. For now, no support for active high given
         if (gpioId != gpio::NO_GPIO) {
-          gpioIF->pullLow(gpioId);
+          gpioIF.pullLow(gpioId);
         }
 
         // Execute transfer
@@ -468,7 +468,7 @@ ReturnValue_t GyroADIS1650XHandler::spiSendCallback(SpiComIF *comIf, SpiCookie *
 #endif /* FSFW_LINUX_SPI_WIRETAPPING == 1 */
 
         if (gpioId != gpio::NO_GPIO) {
-          gpioIF->pullHigh(gpioId);
+          gpioIF.pullHigh(gpioId);
         }
 
         idx += 2;

mission/devices/PayloadPcduHandler.cpp

@@ -719,11 +719,11 @@ ReturnValue_t PayloadPcduHandler::transferAsTwo(SpiComIF* comIf, SpiCookie* cook
   cookie->setTransferSize(transferLen);
 
   gpioId_t gpioId = cookie->getChipSelectPin();
-  GpioIF* gpioIF = comIf->getGpioInterface();
+  GpioIF& gpioIF = comIf->getGpioInterface();
   MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
   uint32_t timeoutMs = 0;
   MutexIF* mutex = comIf->getCsMutex();
-  if (mutex == nullptr or gpioIF == nullptr) {
+  if (mutex == nullptr) {
 #if OBSW_VERBOSE_LEVEL >= 1
     sif::warning << "GyroADIS16507Handler::spiSendCallback: "
                     "Mutex or GPIO interface invalid"
@@ -753,7 +753,7 @@ ReturnValue_t PayloadPcduHandler::transferAsTwo(SpiComIF* comIf, SpiCookie* cook
   transferStruct->len = transferLen;
   // Pull SPI CS low. For now, no support for active high given
   if (gpioId != gpio::NO_GPIO) {
-    gpioIF->pullLow(gpioId);
+    gpioIF.pullLow(gpioId);
   }
 
   // Execute transfer
@@ -768,14 +768,14 @@ ReturnValue_t PayloadPcduHandler::transferAsTwo(SpiComIF* comIf, SpiCookie* cook
 #endif /* FSFW_LINUX_SPI_WIRETAPPING == 1 */
 
   if (gpioId != gpio::NO_GPIO) {
-    gpioIF->pullHigh(gpioId);
+    gpioIF.pullHigh(gpioId);
   }
 
   transferStruct->tx_buf += transferLen;
   transferStruct->rx_buf += transferLen;
   transferStruct->len = plpcdu::TEMP_REPLY_SIZE - 1;
   if (gpioId != gpio::NO_GPIO) {
-    gpioIF->pullLow(gpioId);
+    gpioIF.pullLow(gpioId);
   }
 
   // Execute transfer
@@ -790,7 +790,7 @@ ReturnValue_t PayloadPcduHandler::transferAsTwo(SpiComIF* comIf, SpiCookie* cook
 #endif /* FSFW_LINUX_SPI_WIRETAPPING == 1 */
 
   if (gpioId != gpio::NO_GPIO) {
-    gpioIF->pullHigh(gpioId);
+    gpioIF.pullHigh(gpioId);
   }
 
   transferStruct->tx_buf = origTx;

mission/devices/SolarArrayDeploymentHandler.cpp

@@ -151,7 +151,7 @@ bool SolarArrayDeploymentHandler::autonomousDeplForFile(sd::SdCard sdCard, const
   string line;
   string word;
   unsigned int lineNum = 0;
-  AutonomousDeplState deplState;
+  AutonomousDeplState deplState = AutonomousDeplState::INIT;
   bool stateSwitch = false;
   uint32_t secsSinceBoot = 0;
   while (std::getline(file, line)) {