eive/eive-obsw
13
4
Fork 0
Code Issues 4 Pull Requests 1 Releases 121 Wiki Activity

Major update for power handling
Some checks failed
EIVE/eive-obsw/pipeline/head There was a failure building this commit
Details

Browse Source 
and various smaller updates
This commit is contained in:
Robin Müller
2022-03-16 20:13:21 +01:00
parent 037d68587b
commit 40d9829700
20 changed files with 570 additions and 322 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
linux/fsfwconfig/OBSWConfig.h.in
View File

@ -38,9 +38,9 @@ debugging. */
#define OBSW_USE_CCSDS_IP_CORE 1
// Set to 1 if all telemetry should be sent to the PTME IP Core
#define OBSW_TM_TO_PTME 1
#define OBSW_TM_TO_PTME 0
// Set to 1 if telecommands are received via the PDEC IP Core
#define OBSW_TC_FROM_PDEC 1
#define OBSW_TC_FROM_PDEC 0
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_MGT 1
@ -50,18 +50,23 @@ debugging. */
#define OBSW_ADD_PLOC_MPSOC 0
#define OBSW_ADD_SUN_SENSORS 0
#define OBSW_ADD_ACS_BOARD 1
#define OBSW_ADD_ACS_HANDLERS 0
#define OBSW_ADD_ACS_HANDLERS 1
#define OBSW_ADD_RW 0
#define OBSW_ADD_RTD_DEVICES 0
#define OBSW_ADD_RTD_DEVICES 1
#define OBSW_ADD_TMP_DEVICES 0
#define OBSW_ADD_RAD_SENSORS 0
#define OBSW_ADD_PL_PCDU 0
#define OBSW_ADD_SYRLINKS 0
#define OBSW_ENABLE_SYRLINKS_TRANSMIT_TIMEOUT 0
#define OBSW_SYRLINKS_SIMULATED 1
#define OBSW_STAR_TRACKER_GROUND_CONFIG 1
#define OBSW_ENABLE_PERIODIC_HK 0
#define OBSW_PRINT_CORE_HK 0
// This is a really tricky switch.. It initializes the PCDU switches to their default states
// at powerup. I think it would be better
// to leave it off for now. It makes testing a lot more difficult and it might mess with
// something the operators might want to do by giving the software too much intelligence
// at the wrong place. The system component might command all the Switches accordingly anyway
#define OBSW_INITIALIZE_SWITCHES 0
#endif
@ -88,6 +93,7 @@ debugging. */
#define OBSW_ADD_UART_TEST_CODE 0
#define OBSW_TEST_ACS 0
#define OBSW_TEST_ACS_BOARD_ASS 0
#define OBSW_DEBUG_ACS 0
#define OBSW_TEST_SUS 0
#define OBSW_DEBUG_SUS 0
@ -97,16 +103,19 @@ debugging. */
#define OBSW_DEBUG_RAD_SENSOR 0
#define OBSW_TEST_PL_PCDU 0
#define OBSW_DEBUG_PL_PCDU 0
#define OBSW_TEST_BPX_BATT 0
#define OBSW_DEBUG_BPX_BATT 0
#define OBSW_TEST_LIBGPIOD 0
#define OBSW_TEST_PLOC_HANDLER 0
#define OBSW_TEST_BPX_BATT 0
#define OBSW_TEST_CCSDS_BRIDGE 0
#define OBSW_TEST_CCSDS_PTME 0
#define OBSW_TEST_TE7020_HEATER 0
#define OBSW_TEST_GPIO_OPEN_BY_LABEL 0
#define OBSW_TEST_GPIO_OPEN_BY_LINE_NAME 0
#define OBSW_DEBUG_P60DOCK 0
#define OBSW_DEBUG_BPX_BATT 0
#define OBSW_PRINT_CORE_HK 0
#define OBSW_DEBUG_PDU1 0
#define OBSW_DEBUG_PDU2 0
#define OBSW_DEBUG_GPS 0

57
linux/fsfwconfig/devices/powerSwitcherList.h
View File

@ -1,57 +0,0 @@
#ifndef FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
#define FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
#include "OBSWConfig.h"
namespace pcduSwitches {
/* Switches are uint8_t datatype and go from 0 to 255 */
enum SwitcherList : uint8_t {
Q7S,
PAYLOAD_PCDU_CH1,
RW,
TCS_BOARD_8V_HEATER_IN,
SUS_REDUNDANT,
DEPLOYMENT_MECHANISM,
PAYLOAD_PCDU_CH6,
ACS_BOARD_SIDE_B,
PAYLOAD_CAMERA,
TCS_BOARD_3V3,
SYRLINKS,
STAR_TRACKER,
MGT,
SUS_NOMINAL,
SOLAR_CELL_EXP,
PLOC,
ACS_BOARD_SIDE_A,
NUMBER_OF_SWITCHES
};
static const uint8_t ON = 1;
static const uint8_t OFF = 0;
/* Output states after reboot of the PDUs */
static const uint8_t INIT_STATE_Q7S = ON;
static const uint8_t INIT_STATE_PAYLOAD_PCDU_CH1 = OFF;
static const uint8_t INIT_STATE_RW = OFF;
#if BOARD_TE0720 == 1
/* Because the TE0720 is not connected to the PCDU, this switch is always on */
static const uint8_t INIT_STATE_TCS_BOARD_8V_HEATER_IN = ON;
#else
static const uint8_t INIT_STATE_TCS_BOARD_8V_HEATER_IN = OFF;
#endif
static const uint8_t INIT_STATE_SUS_REDUNDANT = OFF;
static const uint8_t INIT_STATE_DEPLOYMENT_MECHANISM = OFF;
static const uint8_t INIT_STATE_PAYLOAD_PCDU_CH6 = OFF;
static const uint8_t INIT_STATE_ACS_BOARD_SIDE_B = OFF;
static const uint8_t INIT_STATE_PAYLOAD_CAMERA = OFF;
static const uint8_t INIT_STATE_TCS_BOARD_3V3 = OFF;
static const uint8_t INIT_STATE_SYRLINKS = OFF;
static const uint8_t INIT_STATE_STAR_TRACKER = OFF;
static const uint8_t INIT_STATE_MGT = OFF;
static const uint8_t INIT_STATE_SUS_NOMINAL = OFF;
static const uint8_t INIT_STATE_SOLAR_CELL_EXP = OFF;
static const uint8_t INIT_STATE_PLOC = OFF;
static const uint8_t INIT_STATE_ACS_BOARD_SIDE_A = OFF;
} // namespace pcduSwitches
#endif /* FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_ */

27
linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp
View File

@ -32,6 +32,13 @@ ReturnValue_t pst::pstGpio(FixedTimeslotTaskIF *thisSequence) {
ReturnValue_t pst::pstSpi(FixedTimeslotTaskIF *thisSequence) {
uint32_t length = thisSequence->getPeriodMs();
static_cast<void>(length);
#if OBSW_ADD_PL_PCDU == 1
thisSequence->addSlot(objects::PLPCDU_HANDLER, length * 0, DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::PLPCDU_HANDLER, length * 0.2, DeviceHandlerIF::SEND_WRITE);
thisSequence->addSlot(objects::PLPCDU_HANDLER, length * 0.4, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::PLPCDU_HANDLER, length * 0.6, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PLPCDU_HANDLER, length * 0.8, DeviceHandlerIF::GET_READ);
#endif
#if OBSW_ADD_TMP_DEVICES == 1
thisSequence->addSlot(objects::TMP1075_HANDLER_1, length * 0, DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::TMP1075_HANDLER_2, length * 0, DeviceHandlerIF::PERFORM_OPERATION);
@ -357,7 +364,7 @@ ReturnValue_t pst::pstSpi(FixedTimeslotTaskIF *thisSequence) {
#endif
#if OBSW_ADD_ACS_BOARD == 1 && OBSW_ADD_ACS_HANDLERS == 1
bool enableAside = false;
bool enableAside = true;
bool enableBside = true;
if (enableAside) {
// A side
@ -424,17 +431,7 @@ ReturnValue_t pst::pstSpi(FixedTimeslotTaskIF *thisSequence) {
}
#endif /* OBSW_ADD_ACS_BOARD == 1 && OBSW_ADD_ACS_HANDLERS == 1 */
ReturnValue_t seqCheck = thisSequence->checkSequence();
if (seqCheck != HasReturnvaluesIF::RETURN_OK) {
if (seqCheck == FixedTimeslotTaskIF::SLOT_LIST_EMPTY) {
sif::warning << "SPI PST is empty.." << std::endl;
} else {
sif::error << "SPI PST initialization failed" << std::endl;
}
return seqCheck;
}
return HasReturnvaluesIF::RETURN_OK;
return thisSequence->checkSequence();
}
ReturnValue_t pst::pstI2c(FixedTimeslotTaskIF *thisSequence) {
@ -456,11 +453,7 @@ ReturnValue_t pst::pstI2c(FixedTimeslotTaskIF *thisSequence) {
thisSequence->addSlot(objects::BPX_BATT_HANDLER, length * 0.8, DeviceHandlerIF::GET_READ);
#endif
static_cast<void>(length);
if (thisSequence->checkSequence() != HasReturnvaluesIF::RETURN_OK) {
sif::error << "I2C PST initialization failed" << std::endl;
return HasReturnvaluesIF::RETURN_FAILED;
}
return HasReturnvaluesIF::RETURN_OK;
return thisSequence->checkSequence();
}
ReturnValue_t pst::pstUart(FixedTimeslotTaskIF *thisSequence) {