Merge branch 'develop' into acs-flp-safe

.idea/cmake.xml

@@ -2,7 +2,6 @@
 <project version="4">
   <component name="CMakeSharedSettings">
     <configurations>
-      <configuration PROFILE_NAME="Debug" ENABLED="true" CONFIG_NAME="Debug" NO_GENERATOR="true" />
       <configuration PROFILE_NAME="Debug Q7S" ENABLED="true" CONFIG_NAME="Debug" TOOLCHAIN_NAME="Q7S" GENERATION_OPTIONS="-DTGT_BSP=&quot;arm/q7s&quot;" NO_GENERATOR="true">
         <ADDITIONAL_GENERATION_ENVIRONMENT>
           <envs>

CHANGELOG.md

@@ -16,6 +16,118 @@ will consitute of a breaking change warranting a new major release:
 
 # [unreleased]
 
+## Changed
+
+- Adapted HK data rates to new table for LEOP SAFE mode.
+- GPS controller HK is now generated periodically as well.
+
+# [v1.43.1] 2023-04-04
+
+## Fixed
+
+- Generic HK handling: Bug where HKs were generated a lot more often than required. This is the case
+  if a device handler `PERFORM_OPERATION` step is performed more than once per PST cycle.
+- Syrlinks now goes to `_MODE_TO_ON` when finishing the `doStartUp` transition.
+
+## Changed
+
+- Doubled GS PST interval instead of scheduling everything twice.
+- Syrlinks now only has one `PERFORM_OPERATION` step, but still has two communication steps.
+- PCDU components only allow setting `NEEDS_RECOVERY`, `HEALTHY` and `EXTERNAL_CONTROL` health
+  states now. TMP sensor components only allow `HEALTHY` , `EXTERNAL_CONTROL`, `FAULTY` and
+  `PERMANENT_FAULTY`.
+- TCS controller now does a sanity check on the temperature values: Values below -80 C or above
+  160 C are ignored.
+
+# [v1.43.0] 2023-04-04
+
+- q7s-package: v2.4.0
+- eive-tmtc: v2.21.0
+
+## Added
+
+- Version of thermal controller which performs basic control tasks.
+- PCDU handler can now command switch of the 3V3 stack (switch ID 19)
+- Set STR dev to OFF in assembly when it is faulty.
+- STR: Reset data link layer and flush RX for regular commands and before performing special
+  commands to ensure consistent start state
+
+## Fixed
+
+- PTME was not reset after configuration changes.
+- GPS health devices: ACS board assembly not reacts to health changes.
+- STR COM helper: Reset reply size after returning a reply
+
+## Changed
+
+- Poll threshold configuration of the PTME IP core is now configurable via a parameter command
+  and is set to 0b010 (4 polls) instead of 0b001 (1 poll) per default.
+- EIVE system fallback and COM system fallback: Perform general subsystem handling first, then
+  event reception, and finally any new transition handling.
+- IMTQ MGM integration time lowered to 6 ms. This relaxes scheduling requirements a bit.
+- PCDU handler switcher HK set now has additional 3V3 switcher state HK.
+
+# [v1.42.0] 2023-04-01
+
+- eive-tmtc: v2.20.1
+- q7s-package: v2.3.0
+
+## Changed
+
+- SCEX filename updates. Also use T as the file ID / date separator between date and time.
+- COM TM store and dump handling: Introduce modes for all 4 TM VC/store tasks. The OFF mode can be
+  used to disable ongoing dumps or to prevent writes to the PTME VC. This allows cleaner reset
+  handling of the PTME. All 4 VC/store tasks were attached to the COM mode tree and are commanded
+  as part of the COM sequence as well to ensure consistent state with the CCSDS IP core handler.
+- Added `PTME_LOCKED` boolean lock which is used to lock the PTME so it is not used by the VC tasks
+  anymore. This lock will be controlled by the CCSDS IP core handler and is locked when the PTME
+  needs to be reset. Examples for this are datarate changes.
+- Simulate real PCDU in PCDU dummy by remembering commandes switch change and triggering appropriate
+  events. Switch feedback is still immediate.
+- GomSpace devices are polled with a doubled frequency. This speeds up power switch commanding.
+
+## Fixed
+
+- Bugfix for side lane transitions of the dual lane assemblies, which only worked when the
+  assembly was directly commanded.
+- Syrlinks Handler: Bugfix so transition command is only sent once.
+- SCEX file name bug: Create file name time stamp with `strftime` similarly to how it's done
+  for the persistent TM store.
+
+## Added
+
+- Added GPS0 and GPS1 health device which are used by the ACS board assembly when deciding whether
+  to change to the other side or to go to dual side directly. Setting the health devices to faulty
+  should also trigger a side switch or a switch to dual mode.
+
+# [v1.41.0] 2023-03-28
+
+- eive-tmtc: v2.20.0
+- q7s-package: v2.2.0
+
+## Fixed
+
+- Proper Faulty/External Control handling for the dual lane assemblies.
+- ACS board devices: Go to ON mode instead of going to NORMAL mode directly.
+- SUS device handlers: Go to ON mode on startup instead of NORMAL mode.
+- Tweaks for the delay handling for the persistent TM stores. This allows pushing the full
+  high datarate when dumping telemetry. The most important and interesting fix is that
+  there needs to be a small delay between the polling of the GPIO. Polling the GPIO
+  without any delay consecutively can lead to scheduling issues.
+- Bump FSFW for fix of `ControllerBase` class `startTransition` implementation.
+- Bump FSFW for possible fix of `PowerSwitcherComponent`: Initial mode `MODE_UNDEFINED`.
+
+## Changed
+
+- Enabled periodic hosuekeeping generation for release images.
+- Project structure (linux and mission folder) is subsystem centric now.
+
+# [v1.40.0] 2023-03-24
+
+- eive-tmtc: v2.19.4
+- q7s-packasge: v2.1.0
+- Bumped fsfwgen for bugfix: Event translation can deal with duplicate event names now.
+
 ## Fixed
 
 - PAPB busy polling now implemented properly with an upper bound of how often the PAPB is allowed
@@ -23,6 +135,8 @@ will consitute of a breaking change warranting a new major release:
   Ideally, this will never be an issue and the PAPB VC interface should never block for a longer
   period.
 - The `mekfInvalidCounter` now resets on setting the STR to faulty.
+- Improve the SD lock handling. The file handling does not need to be locked as it
+  is only handled by one thread.
 
 ## Added
 
@@ -33,6 +147,7 @@ will consitute of a breaking change warranting a new major release:
 - STR: Fix weird issues on datalink layer data reception which sometimes occur.
 - Syrlinks FDIR: Fully allow FDIR to do more recoveries. Assembly should take care of preventing
   the switch to go off.
+- Allow dual lane assembly side switches.
 
 ## Changed
 
@@ -50,6 +165,7 @@ will consitute of a breaking change warranting a new major release:
 - Fine-tuning of various task priorities.
 - The CSP router now is scheduled with the `SCHED_RR` policy and the same priority as the PCDU
   handlers as well.
+- Change project structure to be more subsystem centric for ACS and COM.
 
 # [v1.39.1] 2023-03-22
 

CMakeLists.txt

@@ -10,7 +10,7 @@
 cmake_minimum_required(VERSION 3.13)
 
 set(OBSW_VERSION_MAJOR 1)
-set(OBSW_VERSION_MINOR 39)
+set(OBSW_VERSION_MINOR 43)
 set(OBSW_VERSION_REVISION 1)
 
 # set(CMAKE_VERBOSE TRUE)
@@ -113,7 +113,7 @@ set(OBSW_ADD_TCS_CTRL
     1
     CACHE STRING "Add TCS controllers")
 set(OBSW_ADD_HEATERS
-    ${INIT_VAL}
+    1
     CACHE STRING "Add TCS heaters")
 set(OBSW_ADD_PLOC_SUPERVISOR
     ${INIT_VAL}
@@ -297,9 +297,11 @@ include(BuildType)
 set_build_type()
 
 set(FSFW_DEBUG_INFO 0)
+set(OBSW_ENABLE_PERIODIC_HK 1)
 set(Q7S_CHECK_FOR_ALREADY_RUNNING_IMG 0)
 if(RELEASE_BUILD MATCHES 0)
   set(FSFW_DEBUG_INFO 1)
+  set(OBSW_ENABLE_PERIODIC_HK 0)
   set(Q7S_CHECK_FOR_ALREADY_RUNNING_IMG 1)
 endif()
 
@@ -407,7 +409,6 @@ add_subdirectory(thirdparty)
 if(EIVE_ADD_LINUX_FILES)
   if(TGT_BSP MATCHES "arm/q7s")
     add_subdirectory(${LIB_GOMSPACE_PATH})
-    add_subdirectory(${LIB_ARCSEC_PATH})
   endif()
   add_subdirectory(${LINUX_PATH})
 endif()
@@ -485,7 +486,8 @@ endif()
 target_link_libraries(${LIB_EIVE_MISSION} PUBLIC ${LIB_FSFW_NAME}
                                                  ${LIB_OS_NAME})
 
-target_link_libraries(${LIB_DUMMIES} PUBLIC ${LIB_FSFW_NAME} ${LIB_JSON_NAME})
+target_link_libraries(${LIB_DUMMIES} PUBLIC ${LIB_EIVE_MISSION}
+                                            ${LIB_FSFW_NAME} ${LIB_JSON_NAME})
 
 target_link_libraries(${OBSW_NAME} PRIVATE ${LIB_EIVE_MISSION} ${LIB_DUMMIES})
 

bsp_hosted/ObjectFactory.cpp

@@ -4,13 +4,14 @@
 #include <fsfw/tmtcservices/CommandingServiceBase.h>
 #include <fsfw/tmtcservices/PusServiceBase.h>
 #include <mission/controller/ThermalController.h>
-#include <mission/core/GenericFactory.h>
+#include <mission/genericFactory.h>
 #include <mission/tmtc/TmFunnelHandler.h>
 #include <objects/systemObjectList.h>
 
 #include "../mission/utility/DummySdCardManager.h"
 #include "OBSWConfig.h"
 #include "fsfw/platform.h"
+#include "fsfw/power/PowerSwitchIF.h"
 #include "fsfw_tests/integration/task/TestTask.h"
 
 #if OBSW_ADD_TMTC_UDP_SERVER == 1
@@ -29,7 +30,7 @@
 #include <dummies/AcuDummy.h>
 #include <dummies/CoreControllerDummy.h>
 
-#include "dummies/helpers.h"
+#include "dummies/helperFactory.h"
 
 #ifdef PLATFORM_UNIX
 #include <fsfw_hal/linux/serial/SerialComIF.h>
@@ -37,10 +38,10 @@
 
 #include "devices/gpioIds.h"
 #include "fsfw_hal/linux/gpio/Gpio.h"
-#include "linux/devices/ploc/PlocMPSoCHandler.h"
+#include "linux/payload/PlocMpsocHandler.h"
-#include "linux/devices/ploc/PlocMPSoCHelper.h"
+#include "linux/payload/PlocMpsocHelper.h"
-#include "linux/devices/ploc/PlocSupervisorHandler.h"
+#include "linux/payload/PlocSupervisorHandler.h"
-#include "linux/devices/ploc/PlocSupvUartMan.h"
+#include "linux/payload/PlocSupvUartMan.h"
 #include "test/gpio/DummyGpioIF.h"
 #endif
 
@@ -67,6 +68,12 @@ void ObjectFactory::produce(void* args) {
 
   auto* dummyGpioIF = new DummyGpioIF();
   auto* dummySwitcher = new DummyPowerSwitcher(objects::PCDU_HANDLER, 18, 0);
+  std::vector<ReturnValue_t> switcherList;
+  auto initVal = PowerSwitchIF::SWITCH_OFF;
+  for (unsigned i = 0; i < 18; i++) {
+    switcherList.emplace_back(initVal);
+  }
+  dummySwitcher->setInitialSwitcherList(switcherList);
 #ifdef PLATFORM_UNIX
   new SerialComIF(objects::UART_COM_IF);
 #if OBSW_ADD_PLOC_MPSOC == 1

bsp_hosted/fsfwconfig/events/translateEvents.cpp

@@ -1,7 +1,7 @@
 /**
- * @brief    Auto-generated event translation file. Contains 280 translations.
+ * @brief    Auto-generated event translation file. Contains 284 translations.
  * @details
- * Generated on: 2023-03-24 15:19:38
+ * Generated on: 2023-04-04 13:59:07
  */
 #include "translateEvents.h"
 
@@ -97,7 +97,6 @@ const char *SAFE_RATE_RECOVERY_STRING = "SAFE_RATE_RECOVERY";
 const char *MULTIPLE_RW_INVALID_STRING = "MULTIPLE_RW_INVALID";
 const char *MEKF_INVALID_INFO_STRING = "MEKF_INVALID_INFO";
 const char *MEKF_RECOVERY_STRING = "MEKF_RECOVERY";
-const char *MEKF_AUTOMATIC_RESET_STRING = "MEKF_AUTOMATIC_RESET";
 const char *MEKF_INVALID_MODE_VIOLATION_STRING = "MEKF_INVALID_MODE_VIOLATION";
 const char *SAFE_MODE_CONTROLLER_FAILURE_STRING = "SAFE_MODE_CONTROLLER_FAILURE";
 const char *SWITCH_CMD_SENT_STRING = "SWITCH_CMD_SENT";
@@ -210,6 +209,11 @@ const char *TRANSITION_OTHER_SIDE_FAILED_STRING = "TRANSITION_OTHER_SIDE_FAILED"
 const char *NOT_ENOUGH_DEVICES_DUAL_MODE_STRING = "NOT_ENOUGH_DEVICES_DUAL_MODE";
 const char *POWER_STATE_MACHINE_TIMEOUT_STRING = "POWER_STATE_MACHINE_TIMEOUT";
 const char *SIDE_SWITCH_TRANSITION_NOT_ALLOWED_STRING = "SIDE_SWITCH_TRANSITION_NOT_ALLOWED";
+const char *DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY_STRING = "DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY";
+const char *TRANSITION_OTHER_SIDE_FAILED_12900_STRING = "TRANSITION_OTHER_SIDE_FAILED_12900";
+const char *NOT_ENOUGH_DEVICES_DUAL_MODE_12901_STRING = "NOT_ENOUGH_DEVICES_DUAL_MODE_12901";
+const char *POWER_STATE_MACHINE_TIMEOUT_12902_STRING = "POWER_STATE_MACHINE_TIMEOUT_12902";
+const char *SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903_STRING = "SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903";
 const char *CHILDREN_LOST_MODE_STRING = "CHILDREN_LOST_MODE";
 const char *GPS_FIX_CHANGE_STRING = "GPS_FIX_CHANGE";
 const char *CANT_GET_FIX_STRING = "CANT_GET_FIX";
@@ -266,21 +270,25 @@ const char *I2C_UNAVAILABLE_REBOOT_STRING = "I2C_UNAVAILABLE_REBOOT";
 const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
 const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
 const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
-const char *PLOC_OVERHEATING_STRING = "PLOC_OVERHEATING";
 const char *OBC_OVERHEATING_STRING = "OBC_OVERHEATING";
-const char *HPA_OVERHEATING_STRING = "HPA_OVERHEATING";
+const char *CAMERA_OVERHEATING_STRING = "CAMERA_OVERHEATING";
-const char *PLPCDU_OVERHEATING_STRING = "PLPCDU_OVERHEATING";
+const char *PCDU_SYSTEM_OVERHEATING_STRING = "PCDU_SYSTEM_OVERHEATING";
+const char *HEATER_NOT_OFF_FOR_OFF_MODE_STRING = "HEATER_NOT_OFF_FOR_OFF_MODE";
 const char *TX_TIMER_EXPIRED_STRING = "TX_TIMER_EXPIRED";
 const char *BIT_LOCK_TX_ON_STRING = "BIT_LOCK_TX_ON";
 const char *POSSIBLE_FILE_CORRUPTION_STRING = "POSSIBLE_FILE_CORRUPTION";
 const char *FILE_TOO_LARGE_STRING = "FILE_TOO_LARGE";
 const char *BUSY_DUMPING_EVENT_STRING = "BUSY_DUMPING_EVENT";
-const char *DUMP_WAS_CANCELLED_STRING = "DUMP_WAS_CANCELLED";
 const char *DUMP_OK_STORE_DONE_STRING = "DUMP_OK_STORE_DONE";
 const char *DUMP_NOK_STORE_DONE_STRING = "DUMP_NOK_STORE_DONE";
 const char *DUMP_MISC_STORE_DONE_STRING = "DUMP_MISC_STORE_DONE";
 const char *DUMP_HK_STORE_DONE_STRING = "DUMP_HK_STORE_DONE";
 const char *DUMP_CFDP_STORE_DONE_STRING = "DUMP_CFDP_STORE_DONE";
+const char *DUMP_OK_CANCELLED_STRING = "DUMP_OK_CANCELLED";
+const char *DUMP_NOK_CANCELLED_STRING = "DUMP_NOK_CANCELLED";
+const char *DUMP_MISC_CANCELLED_STRING = "DUMP_MISC_CANCELLED";
+const char *DUMP_HK_CANCELLED_STRING = "DUMP_HK_CANCELLED";
+const char *DUMP_CFDP_CANCELLED_STRING = "DUMP_CFDP_CANCELLED";
 
 const char *translateEvents(Event event) {
   switch ((event & 0xFFFF)) {
@@ -469,10 +477,8 @@ const char *translateEvents(Event event) {
     case (11204):
       return MEKF_RECOVERY_STRING;
     case (11205):
-      return MEKF_AUTOMATIC_RESET_STRING;
-    case (11206):
       return MEKF_INVALID_MODE_VIOLATION_STRING;
-    case (11207):
+    case (11206):
       return SAFE_MODE_CONTROLLER_FAILURE_STRING;
     case (11300):
       return SWITCH_CMD_SENT_STRING;
@@ -694,6 +700,16 @@ const char *translateEvents(Event event) {
       return POWER_STATE_MACHINE_TIMEOUT_STRING;
     case (12803):
       return SIDE_SWITCH_TRANSITION_NOT_ALLOWED_STRING;
+    case (12804):
+      return DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY_STRING;
+    case (12900):
+      return TRANSITION_OTHER_SIDE_FAILED_12900_STRING;
+    case (12901):
+      return NOT_ENOUGH_DEVICES_DUAL_MODE_12901_STRING;
+    case (12902):
+      return POWER_STATE_MACHINE_TIMEOUT_12902_STRING;
+    case (12903):
+      return SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903_STRING;
     case (13000):
       return CHILDREN_LOST_MODE_STRING;
     case (13100):
@@ -806,14 +822,14 @@ const char *translateEvents(Event event) {
       return NO_HEALTHY_HEATER_AVAILABLE_STRING;
     case (14102):
       return SYRLINKS_OVERHEATING_STRING;
-    case (14103):
-      return PLOC_OVERHEATING_STRING;
     case (14104):
       return OBC_OVERHEATING_STRING;
     case (14105):
-      return HPA_OVERHEATING_STRING;
+      return CAMERA_OVERHEATING_STRING;
     case (14106):
-      return PLPCDU_OVERHEATING_STRING;
+      return PCDU_SYSTEM_OVERHEATING_STRING;
+    case (14107):
+      return HEATER_NOT_OFF_FOR_OFF_MODE_STRING;
     case (14201):
       return TX_TIMER_EXPIRED_STRING;
     case (14202):
@@ -824,8 +840,6 @@ const char *translateEvents(Event event) {
       return FILE_TOO_LARGE_STRING;
     case (14302):
       return BUSY_DUMPING_EVENT_STRING;
-    case (14303):
-      return DUMP_WAS_CANCELLED_STRING;
     case (14305):
       return DUMP_OK_STORE_DONE_STRING;
     case (14306):
@@ -836,6 +850,16 @@ const char *translateEvents(Event event) {
       return DUMP_HK_STORE_DONE_STRING;
     case (14309):
       return DUMP_CFDP_STORE_DONE_STRING;
+    case (14310):
+      return DUMP_OK_CANCELLED_STRING;
+    case (14311):
+      return DUMP_NOK_CANCELLED_STRING;
+    case (14312):
+      return DUMP_MISC_CANCELLED_STRING;
+    case (14313):
+      return DUMP_HK_CANCELLED_STRING;
+    case (14314):
+      return DUMP_CFDP_CANCELLED_STRING;
     default:
       return "UNKNOWN_EVENT";
   }

bsp_hosted/fsfwconfig/objects/translateObjects.cpp

@@ -1,8 +1,8 @@
 /**
  * @brief  Auto-generated object translation file.
  * @details
- * Contains 169 translations.
+ * Contains 171 translations.
- * Generated on: 2023-03-24 15:19:38
+ * Generated on: 2023-04-04 13:59:07
  */
 #include "translateObjects.h"
 
@@ -38,6 +38,8 @@ const char *GYRO_3_L3G_HANDLER_STRING = "GYRO_3_L3G_HANDLER";
 const char *RW4_STRING = "RW4";
 const char *STAR_TRACKER_STRING = "STAR_TRACKER";
 const char *GPS_CONTROLLER_STRING = "GPS_CONTROLLER";
+const char *GPS_0_HEALTH_DEV_STRING = "GPS_0_HEALTH_DEV";
+const char *GPS_1_HEALTH_DEV_STRING = "GPS_1_HEALTH_DEV";
 const char *IMTQ_POLLING_STRING = "IMTQ_POLLING";
 const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER";
 const char *PCDU_HANDLER_STRING = "PCDU_HANDLER";
@@ -242,6 +244,10 @@ const char *translateObject(object_id_t object) {
       return STAR_TRACKER_STRING;
     case 0x44130045:
       return GPS_CONTROLLER_STRING;
+    case 0x44130046:
+      return GPS_0_HEALTH_DEV_STRING;
+    case 0x44130047:
+      return GPS_1_HEALTH_DEV_STRING;
     case 0x44140013:
       return IMTQ_POLLING_STRING;
     case 0x44140014:

bsp_hosted/scheduling.cpp

@@ -14,7 +14,7 @@
 
 #include "OBSWConfig.h"
 #include "ObjectFactory.h"
-#include "mission/core/scheduling.h"
+#include "mission/scheduling.h"
 #include "scheduling.h"
 
 #ifdef LINUX
@@ -156,6 +156,10 @@ void scheduling::initTasks() {
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("THERMAL_CONTROLLER", objects::THERMAL_CONTROLLER);
   }
+  result = thermalTask->addComponent(objects::HEATER_HANDLER);
+  if (result != returnvalue::OK) {
+    scheduling::printAddObjectError("HEATER_HANDLER", objects::HEATER_HANDLER);
+  }
 
   FixedTimeslotTaskIF* pstTask = factory->createFixedTimeslotTask(
       "DUMMY_PST", 75, PeriodicTaskIF::MINIMUM_STACK_SIZE * 4, 0.5, missedDeadlineFunc);
@@ -193,7 +197,8 @@ void scheduling::initTasks() {
 #endif /* OBSW_ADD_TEST_CODE == 1 */
 
   PeriodicTaskIF* dummyTask = factory->createPeriodicTask(
-      "DUMMY_TASK", 30, PeriodicTaskIF::MINIMUM_STACK_SIZE, 1.0, missedDeadlineFunc);
+      "DUMMY_TASK", 35, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.8, missedDeadlineFunc);
+  dummyTask->addComponent(objects::THERMAL_TEMP_INSERTER);
   scheduling::scheduleTmpTempSensors(dummyTask);
   scheduling::scheduleRtdSensors(dummyTask);
   dummyTask->addComponent(objects::SUS_0_N_LOC_XFYFZM_PT_XF);

bsp_q7s/OBSWConfig.h.in

@@ -13,9 +13,12 @@
 /** All of the following flags should be enabled for mission code  */
 /*******************************************************************/
 
-#define OBSW_ENABLE_PERIODIC_HK                     0
+// This enables a lot of periodically generated telemetry, so it can make sense to
+// disable this for debugging purposes.
+#define OBSW_ENABLE_PERIODIC_HK                     @OBSW_ENABLE_PERIODIC_HK@
+
 // This switch will cause the SW to command the EIVE system object to safe mode. This will
-// trigger a lot of events, so it can make sense to disable this for debugging purposes
+// trigger a lot of events, so it can make sense to disable this for debugging purposes.
 #define OBSW_COMMAND_SAFE_MODE_AT_STARTUP           1
 
 #define OBSW_ADD_GOMSPACE_PCDU                      @OBSW_ADD_GOMSPACE_PCDU@
@@ -28,8 +31,8 @@
 #define OBSW_ADD_SUS_BOARD_ASS                      @OBSW_ADD_SUS_BOARD_ASS@
 #define OBSW_ADD_ACS_BOARD                          @OBSW_ADD_ACS_BOARD@
 #define OBSW_ADD_ACS_CTRL                           1
+#define OBSW_ADD_TCS_CTRL                           1
 #define OBSW_ADD_GPS_CTRL                           @OBSW_ADD_GPS_CTRL@
-#define OBSW_ADD_TCS_CTRL                           @OBSW_ADD_TCS_CTRL@
 #define OBSW_ADD_RW                                 @OBSW_ADD_RW@
 #define OBSW_ADD_RTD_DEVICES                        @OBSW_ADD_RTD_DEVICES@
 #define OBSW_ADD_SA_DEPL                            @OBSW_ADD_SA_DEPL@

bsp_q7s/callbacks/pcduSwitchCb.h

@@ -1,9 +1,9 @@
 #ifndef BSP_Q7S_CALLBACKS_PCDUSWITCHCB_H_
 #define BSP_Q7S_CALLBACKS_PCDUSWITCHCB_H_
 
-#include <cstdint>
+#include <mission/power/gsDefs.h>
 
-#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
+#include <cstdint>
 
 namespace pcdu {
 

bsp_q7s/callbacks/rwSpiCallback.cpp

@@ -6,7 +6,7 @@
 #include "fsfw/serviceinterface/ServiceInterface.h"
 #include "fsfw_hal/linux/UnixFileGuard.h"
 #include "fsfw_hal/linux/spi/SpiCookie.h"
-#include "mission/devices/RwHandler.h"
+#include "mission/acs/RwHandler.h"
 
 namespace rwSpiCallback {
 

bsp_q7s/core/CoreController.cpp

@@ -31,8 +31,10 @@
 xsc::Chip CoreController::CURRENT_CHIP = xsc::Chip::NO_CHIP;
 xsc::Copy CoreController::CURRENT_COPY = xsc::Copy::NO_COPY;
 
-CoreController::CoreController(object_id_t objectId, const std::atomic_uint16_t &i2cErrors)
+CoreController::CoreController(object_id_t objectId, const std::atomic_uint16_t &i2cErrors,
+                               bool enableHkSet)
     : ExtendedControllerBase(objectId, 5),
+      enableHkSet(enableHkSet),
       cmdExecutor(4096),
       cmdReplyBuf(4096, true),
       cmdRepliesSizes(128),
@@ -136,7 +138,7 @@ ReturnValue_t CoreController::initializeLocalDataPool(localpool::DataPool &local
   localDataPoolMap.emplace(core::TEMPERATURE, &tempPoolEntry);
   localDataPoolMap.emplace(core::PS_VOLTAGE, &psVoltageEntry);
   localDataPoolMap.emplace(core::PL_VOLTAGE, &plVoltageEntry);
-  poolManager.subscribeForRegularPeriodicPacket({hkSet.getSid(), false, 10.0});
+  poolManager.subscribeForRegularPeriodicPacket({hkSet.getSid(), enableHkSet, 60.0});
   return returnvalue::OK;
 }
 

bsp_q7s/core/CoreController.h

@@ -5,6 +5,8 @@
 #include <fsfw/container/SimpleRingBuffer.h>
 #include <fsfw/globalfunctions/PeriodicOperationDivider.h>
 #include <libxiphos.h>
+#include <mission/acs/archive/GPSDefinitions.h>
+#include <mission/utility/trace.h>
 
 #include <atomic>
 #include <cstddef>
@@ -14,8 +16,6 @@
 #include "bsp_q7s/fs/SdCardManager.h"
 #include "events/subsystemIdRanges.h"
 #include "fsfw/controller/ExtendedControllerBase.h"
-#include "mission/devices/devicedefinitions/GPSDefinitions.h"
-#include "mission/trace.h"
 
 class Timer;
 class SdCardManager;
@@ -135,7 +135,7 @@ class CoreController : public ExtendedControllerBase {
   static constexpr Event I2C_UNAVAILABLE_REBOOT =
       event::makeEvent(SUBSYSTEM_ID, 10, severity::MEDIUM);
 
-  CoreController(object_id_t objectId, const std::atomic_uint16_t& i2cErrors);
+  CoreController(object_id_t objectId, const std::atomic_uint16_t& i2cErrors, bool enableHkSet);
   virtual ~CoreController();
 
   ReturnValue_t initialize() override;
@@ -179,6 +179,7 @@ class CoreController : public ExtendedControllerBase {
   static constexpr uint32_t BOOT_OFFSET_SECONDS = 15;
   static constexpr MutexIF::TimeoutType TIMEOUT_TYPE = MutexIF::TimeoutType::WAITING;
   static constexpr uint32_t MUTEX_TIMEOUT = 20;
+  bool enableHkSet = false;
   GpsHyperion::FixMode gpsFix = GpsHyperion::FixMode::UNKNOWN;
 
   // States for SD state machine, which is used in non-blocking mode

bsp_q7s/core/ObjectFactory.cpp

@@ -1,22 +1,34 @@
 #include "ObjectFactory.h"
 
+#include <fsfw/devicehandlers/HealthDevice.h>
 #include <fsfw/subsystem/Subsystem.h>
-#include <linux/devices/AcsBoardPolling.h>
+#include <linux/acs/AcsBoardPolling.h>
-#include <linux/devices/ImtqPollingTask.h>
+#include <linux/acs/GpsHyperionLinuxController.h>
-#include <linux/devices/RwPollingTask.h>
+#include <linux/acs/ImtqPollingTask.h>
-#include <linux/devices/SyrlinksComHandler.h>
+#include <linux/acs/RwPollingTask.h>
-#include <linux/devices/startracker/StrComHandler.h>
+#include <linux/acs/StrComHandler.h>
-#include <mission/devices/GyrL3gCustomHandler.h>
+#include <linux/com/SyrlinksComHandler.h>
-#include <mission/devices/MgmLis3CustomHandler.h>
+#include <linux/payload/PlocMemoryDumper.h>
-#include <mission/devices/MgmRm3100CustomHandler.h>
+#include <linux/payload/PlocMpsocHandler.h>
-#include <mission/system/fdir/StrFdir.h>
+#include <linux/payload/PlocMpsocHelper.h>
+#include <linux/payload/PlocSupervisorHandler.h>
+#include <linux/payload/ScexUartReader.h>
+#include <linux/payload/plocMpscoDefs.h>
+#include <linux/power/CspComIF.h>
+#include <mission/acs/GyrL3gCustomHandler.h>
+#include <mission/acs/MgmLis3CustomHandler.h>
+#include <mission/acs/MgmRm3100CustomHandler.h>
+#include <mission/acs/str/StarTrackerHandler.h>
+#include <mission/acs/str/strHelpers.h>
+#include <mission/com/LiveTmTask.h>
+#include <mission/com/PersistentLogTmStoreTask.h>
+#include <mission/com/PersistentSingleTmStoreTask.h>
+#include <mission/power/CspCookie.h>
+#include <mission/system/acs/ImtqAssembly.h>
+#include <mission/system/acs/StrAssembly.h>
+#include <mission/system/acs/StrFdir.h>
 #include <mission/system/objects/CamSwitcher.h>
-#include <mission/system/objects/ImtqAssembly.h>
-#include <mission/system/objects/StrAssembly.h>
 #include <mission/system/objects/SyrlinksAssembly.h>
-#include <mission/tmtc/LiveTmTask.h>
-#include <mission/tmtc/PersistentLogTmStoreTask.h>
-#include <mission/tmtc/PersistentSingleTmStoreTask.h>
 
 #include "OBSWConfig.h"
 #include "bsp_q7s/boardtest/Q7STestTask.h"
@@ -37,33 +49,22 @@
 #include "linux/boardtest/SpiTestClass.h"
 #include "linux/boardtest/UartTestClass.h"
 #include "linux/callbacks/gpioCallbacks.h"
-#include "linux/csp/CspComIF.h"
-#include "linux/devices/GpsHyperionLinuxController.h"
-#include "linux/devices/ScexUartReader.h"
-#include "linux/devices/devicedefinitions/PlocMPSoCDefinitions.h"
-#include "linux/devices/devicedefinitions/StarTrackerDefinitions.h"
-#include "linux/devices/ploc/PlocMPSoCHandler.h"
-#include "linux/devices/ploc/PlocMPSoCHelper.h"
-#include "linux/devices/ploc/PlocMemoryDumper.h"
-#include "linux/devices/ploc/PlocSupervisorHandler.h"
-#include "linux/devices/startracker/StarTrackerHandler.h"
 #include "linux/ipcore/AxiPtmeConfig.h"
 #include "linux/ipcore/PapbVcInterface.h"
 #include "linux/ipcore/PdecHandler.h"
 #include "linux/ipcore/Ptme.h"
 #include "linux/ipcore/PtmeConfig.h"
 #include "mission/config/configfile.h"
-#include "mission/csp/CspCookie.h"
+#include "mission/system/acs/AcsBoardFdir.h"
-#include "mission/system/fdir/AcsBoardFdir.h"
+#include "mission/system/acs/AcsSubsystem.h"
-#include "mission/system/fdir/GomspacePowerFdir.h"
+#include "mission/system/acs/RwAssembly.h"
+#include "mission/system/acs/SusFdir.h"
+#include "mission/system/acs/acsModeTree.h"
+#include "mission/system/com/SyrlinksFdir.h"
+#include "mission/system/com/comModeTree.h"
 #include "mission/system/fdir/RtdFdir.h"
-#include "mission/system/fdir/SusFdir.h"
-#include "mission/system/fdir/SyrlinksFdir.h"
-#include "mission/system/objects/AcsSubsystem.h"
-#include "mission/system/objects/RwAssembly.h"
 #include "mission/system/objects/TcsBoardAssembly.h"
-#include "mission/system/tree/acsModeTree.h"
+#include "mission/system/power/GomspacePowerFdir.h"
-#include "mission/system/tree/comModeTree.h"
 #include "mission/system/tree/payloadModeTree.h"
 #include "mission/system/tree/tcsModeTree.h"
 #include "mission/tmtc/tmFilters.h"
@@ -75,14 +76,27 @@ using gpio::Levels;
 #if OBSW_TEST_LIBGPIOD == 1
 #include "linux/boardtest/LibgpiodTest.h"
 #endif
-#include <mission/devices/GyrAdis1650XHandler.h>
+#include <mission/SolarArrayDeploymentHandler.h>
-#include <mission/devices/ImtqHandler.h>
+#include <mission/acs/GyrAdis1650XHandler.h>
-#include <mission/devices/PcduHandler.h>
+#include <mission/acs/ImtqHandler.h>
-#include <mission/devices/Pdu1Handler.h>
+#include <mission/acs/rwHelpers.h>
-#include <mission/devices/Pdu2Handler.h>
+#include <mission/com/SyrlinksHandler.h>
-#include <mission/devices/SyrlinksHandler.h>
+#include <mission/com/VirtualChannelWithQueue.h>
-#include <mission/devices/devicedefinitions/rwHelpers.h>
+#include <mission/payload/PayloadPcduHandler.h>
-#include <mission/tmtc/VirtualChannelWithQueue.h>
+#include <mission/payload/RadiationSensorHandler.h>
+#include <mission/payload/payloadPcduDefinitions.h>
+#include <mission/payload/radSensorDefinitions.h>
+#include <mission/power/AcuHandler.h>
+#include <mission/power/BpxBatteryHandler.h>
+#include <mission/power/P60DockHandler.h>
+#include <mission/power/PcduHandler.h>
+#include <mission/power/Pdu1Handler.h>
+#include <mission/power/Pdu2Handler.h>
+#include <mission/power/gsDefs.h>
+#include <mission/tcs/HeaterHandler.h>
+#include <mission/tcs/Max31865Definitions.h>
+#include <mission/tcs/Max31865PT1000Handler.h>
+#include <mission/tcs/Tmp1075Handler.h>
 
 #include <sstream>
 
@@ -102,28 +116,16 @@ using gpio::Levels;
 #include "fsfw_hal/linux/serial/SerialCookie.h"
 #include "fsfw_hal/linux/spi/SpiComIF.h"
 #include "fsfw_hal/linux/spi/SpiCookie.h"
-#include "mission/core/GenericFactory.h"
+#include "mission/acs/RwHandler.h"
-#include "mission/devices/ACUHandler.h"
+#include "mission/com/CcsdsIpCoreHandler.h"
-#include "mission/devices/BpxBatteryHandler.h"
+#include "mission/com/syrlinksDefs.h"
-#include "mission/devices/HeaterHandler.h"
+#include "mission/genericFactory.h"
-#include "mission/devices/Max31865PT1000Handler.h"
+#include "mission/system/acs/AcsBoardAssembly.h"
-#include "mission/devices/P60DockHandler.h"
-#include "mission/devices/PayloadPcduHandler.h"
-#include "mission/devices/RadiationSensorHandler.h"
-#include "mission/devices/RwHandler.h"
-#include "mission/devices/SolarArrayDeploymentHandler.h"
-#include "mission/devices/Tmp1075Handler.h"
-#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
-#include "mission/devices/devicedefinitions/Max31865Definitions.h"
-#include "mission/devices/devicedefinitions/RadSensorDefinitions.h"
-#include "mission/devices/devicedefinitions/SyrlinksDefinitions.h"
-#include "mission/devices/devicedefinitions/payloadPcduDefinitions.h"
-#include "mission/system/objects/AcsBoardAssembly.h"
-#include "mission/tmtc/CcsdsIpCoreHandler.h"
 #include "mission/tmtc/TmFunnelHandler.h"
 
 ResetArgs RESET_ARGS_GNSS;
 std::atomic_bool LINK_STATE = CcsdsIpCoreHandler::LINK_DOWN;
+std::atomic_bool PTME_LOCKED = false;
 std::atomic_uint16_t I2C_FATAL_ERRORS = 0;
 
 void Factory::setStaticFrameworkObjectIds() {
@@ -187,27 +189,28 @@ void ObjectFactory::createCommunicationInterfaces(LinuxLibgpioIF** gpioComIF,
   //*spiRWComIF = new SpiComIF(objects::SPI_RW_COM_IF, q7s::SPI_RW_DEV, **gpioComIF);
 }
 
-void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher) {
+void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher,
+                                         bool enableHkSets) {
   CspCookie* p60DockCspCookie = new CspCookie(P60Dock::MAX_REPLY_SIZE, addresses::P60DOCK, 500);
   CspCookie* pdu1CspCookie = new CspCookie(PDU::MAX_REPLY_SIZE, addresses::PDU1, 500);
   CspCookie* pdu2CspCookie = new CspCookie(PDU::MAX_REPLY_SIZE, addresses::PDU2, 500);
   CspCookie* acuCspCookie = new CspCookie(ACU::MAX_REPLY_SIZE, addresses::ACU, 500);
 
   auto p60Fdir = new GomspacePowerFdir(objects::P60DOCK_HANDLER);
-  P60DockHandler* p60dockhandler =
+  P60DockHandler* p60dockhandler = new P60DockHandler(objects::P60DOCK_HANDLER, objects::CSP_COM_IF,
-      new P60DockHandler(objects::P60DOCK_HANDLER, objects::CSP_COM_IF, p60DockCspCookie, p60Fdir);
+                                                      p60DockCspCookie, p60Fdir, enableHkSets);
 
   auto pdu1Fdir = new GomspacePowerFdir(objects::PDU1_HANDLER);
-  Pdu1Handler* pdu1handler =
+  Pdu1Handler* pdu1handler = new Pdu1Handler(objects::PDU1_HANDLER, objects::CSP_COM_IF,
-      new Pdu1Handler(objects::PDU1_HANDLER, objects::CSP_COM_IF, pdu1CspCookie, pdu1Fdir);
+                                             pdu1CspCookie, pdu1Fdir, enableHkSets);
 
   auto pdu2Fdir = new GomspacePowerFdir(objects::PDU2_HANDLER);
-  Pdu2Handler* pdu2handler =
+  Pdu2Handler* pdu2handler = new Pdu2Handler(objects::PDU2_HANDLER, objects::CSP_COM_IF,
-      new Pdu2Handler(objects::PDU2_HANDLER, objects::CSP_COM_IF, pdu2CspCookie, pdu2Fdir);
+                                             pdu2CspCookie, pdu2Fdir, enableHkSets);
 
   auto acuFdir = new GomspacePowerFdir(objects::ACU_HANDLER);
-  ACUHandler* acuhandler =
+  ACUHandler* acuhandler = new ACUHandler(objects::ACU_HANDLER, objects::CSP_COM_IF, acuCspCookie,
-      new ACUHandler(objects::ACU_HANDLER, objects::CSP_COM_IF, acuCspCookie, acuFdir);
+                                          acuFdir, enableHkSets);
   auto pcduHandler = new PcduHandler(objects::PCDU_HANDLER, 50);
 
   /**
@@ -357,7 +360,8 @@ void ObjectFactory::createAcsBoardGpios(GpioCookie& cookie) {
 }
 
 void ObjectFactory::createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF* gpioComIF,
-                                             SerialComIF* uartComIF, PowerSwitchIF& pwrSwitcher) {
+                                             SerialComIF* uartComIF, PowerSwitchIF& pwrSwitcher,
+                                             bool enableHkSets) {
   using namespace gpio;
   GpioCookie* gpioCookieAcsBoard = new GpioCookie();
   createAcsBoardGpios(*gpioCookieAcsBoard);
@@ -511,8 +515,8 @@ void ObjectFactory::createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF*
 #endif
   RESET_ARGS_GNSS.gpioComIF = gpioComIF;
   RESET_ARGS_GNSS.waitPeriodMs = 100;
-  auto gpsCtrl =
+  auto gpsCtrl = new GpsHyperionLinuxController(objects::GPS_CONTROLLER, objects::NO_OBJECT,
-      new GpsHyperionLinuxController(objects::GPS_CONTROLLER, objects::NO_OBJECT, debugGps);
+                                                enableHkSets, debugGps);
   gpsCtrl->setResetPinTriggerFunction(gps::triggerGpioResetPin, &RESET_ARGS_GNSS);
 
   ObjectFactory::createAcsBoardAssy(pwrSwitcher, assemblyChildren, gpsCtrl, gpioComIF);
@@ -587,7 +591,7 @@ void ObjectFactory::createSolarArrayDeploymentComponents(PowerSwitchIF& pwrSwitc
   }
 
   new SolarArrayDeploymentHandler(objects::SOLAR_ARRAY_DEPL_HANDLER, gpioIF, pwrSwitcher,
-                                  pcdu::Switches::PDU2_CH5_DEPLOYMENT_MECHANISM_8V,
+                                  power::Switches::PDU2_CH5_DEPLOYMENT_MECHANISM_8V,
                                   gpioIds::DEPLSA1, gpioIds::DEPLSA2, *SdCardManager::instance());
 }
 
@@ -603,7 +607,7 @@ void ObjectFactory::createSyrlinksComponents(PowerSwitchIF* pwrSwitcher) {
   auto syrlinksFdir = new SyrlinksFdir(objects::SYRLINKS_HANDLER);
   auto syrlinksHandler =
       new SyrlinksHandler(objects::SYRLINKS_HANDLER, objects::SYRLINKS_COM_HANDLER,
-                          syrlinksUartCookie, pcdu::PDU1_CH1_SYRLINKS_12V, syrlinksFdir);
+                          syrlinksUartCookie, power::PDU1_CH1_SYRLINKS_12V, syrlinksFdir);
   syrlinksHandler->setPowerSwitcher(pwrSwitcher);
   syrlinksHandler->connectModeTreeParent(*syrlinksAssy);
 #if OBSW_DEBUG_SYRLINKS == 1
@@ -615,7 +619,7 @@ void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF, PowerSwit
   using namespace gpio;
   std::stringstream consumer;
   auto* camSwitcher =
-      new CamSwitcher(objects::CAM_SWITCHER, pwrSwitch, pcdu::PDU2_CH8_PAYLOAD_CAMERA);
+      new CamSwitcher(objects::CAM_SWITCHER, pwrSwitch, power::PDU2_CH8_PAYLOAD_CAMERA);
   camSwitcher->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
 #if OBSW_ADD_PLOC_MPSOC == 1
   consumer << "0x" << std::hex << objects::PLOC_MPSOC_HANDLER;
@@ -648,7 +652,7 @@ void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF, PowerSwit
   auto supvHelper = new PlocSupvUartManager(objects::PLOC_SUPERVISOR_HELPER);
   auto* supvHandler = new PlocSupervisorHandler(objects::PLOC_SUPERVISOR_HANDLER, supervisorCookie,
                                                 Gpio(gpioIds::ENABLE_SUPV_UART, gpioComIF),
-                                                pcdu::PDU1_CH6_PLOC_12V, *supvHelper);
+                                                power::PDU1_CH6_PLOC_12V, *supvHelper);
   supvHandler->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
 #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */
   static_cast<void>(consumer);
@@ -725,7 +729,7 @@ void ObjectFactory::createReactionWheelComponents(LinuxLibgpioIF* gpioComIF,
     rws[idx] = rwHandler;
   }
 
-  createRwAssy(*pwrSwitcher, pcdu::Switches::PDU2_CH2_RW_5V, rws, rwIds);
+  createRwAssy(*pwrSwitcher, power::Switches::PDU2_CH2_RW_5V, rws, rwIds);
 #endif /* OBSW_ADD_RW == 1 */
 }
 
@@ -750,10 +754,8 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
   gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_BUSY, gpio);
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC3, "PAPB VC3");
   gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_EMPTY, gpio);
-  // Initialise to low and then pull high to do a PTME reset, which puts the PTME in reset
-  // state. It will be put out of reset in the CCSDS handler initialize function.
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PTME_RESETN, "PTME RESETN",
-                                    gpio::Direction::OUT, gpio::Levels::LOW);
+                                    gpio::Direction::OUT, gpio::Levels::HIGH);
   gpioCookiePtmeIp->addGpio(gpioIds::PTME_RESETN, gpio);
   gpioChecker(args.gpioComIF.addGpios(gpioCookiePtmeIp), "PTME PAPB VCs");
 
@@ -787,34 +789,42 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
 
   *args.ipCoreHandler =
       new CcsdsIpCoreHandler(objects::CCSDS_HANDLER, objects::CCSDS_PACKET_DISTRIBUTOR, *ptmeConfig,
-                             LINK_STATE, &args.gpioComIF, gpios);
+                             LINK_STATE, &args.gpioComIF, gpios, PTME_LOCKED);
   // This VC will receive all live TM
   auto* vcWithQueue =
       new VirtualChannelWithQueue(objects::PTME_VC0_LIVE_TM, ccsds::VC0, "PTME VC0 LIVE TM", *ptme,
                                   LINK_STATE, args.tmStore, 500);
   args.liveDestination = vcWithQueue;
-  new LiveTmTask(objects::LIVE_TM_TASK, args.pusFunnel, args.cfdpFunnel, *vcWithQueue);
+  auto* liveTask = new LiveTmTask(objects::LIVE_TM_TASK, args.pusFunnel, args.cfdpFunnel,
+                                  *vcWithQueue, PTME_LOCKED);
+  liveTask->connectModeTreeParent(satsystem::com::SUBSYSTEM);
 
   // Set up log store.
   auto* vc = new VirtualChannel(objects::PTME_VC1_LOG_TM, ccsds::VC1, "PTME VC1 LOG TM", *ptme,
                                 LINK_STATE);
   LogStores logStores(args.stores);
   // Core task which handles the LOG store and takes care of dumping it as TM using a VC directly
-  new PersistentLogTmStoreTask(objects::LOG_STORE_AND_TM_TASK, args.ipcStore, logStores, *vc,
+  auto* logStore =
-                               *SdCardManager::instance());
+      new PersistentLogTmStoreTask(objects::LOG_STORE_AND_TM_TASK, args.ipcStore, logStores, *vc,
+                                   *SdCardManager::instance(), PTME_LOCKED);
+  logStore->connectModeTreeParent(satsystem::com::SUBSYSTEM);
 
   vc = new VirtualChannel(objects::PTME_VC2_HK_TM, ccsds::VC2, "PTME VC2 HK TM", *ptme, LINK_STATE);
   // Core task which handles the HK store and takes care of dumping it as TM using a VC directly
-  new PersistentSingleTmStoreTask(objects::HK_STORE_AND_TM_TASK, args.ipcStore,
+  auto* hkStore = new PersistentSingleTmStoreTask(
-                                  *args.stores.hkStore, *vc, persTmStore::DUMP_HK_STORE_DONE,
+      objects::HK_STORE_AND_TM_TASK, args.ipcStore, *args.stores.hkStore, *vc,
-                                  *SdCardManager::instance());
+      persTmStore::DUMP_HK_STORE_DONE, persTmStore::DUMP_HK_STORE_DONE, *SdCardManager::instance(),
+      PTME_LOCKED);
+  hkStore->connectModeTreeParent(satsystem::com::SUBSYSTEM);
 
   vc = new VirtualChannel(objects::PTME_VC3_CFDP_TM, ccsds::VC3, "PTME VC3 CFDP TM", *ptme,
                           LINK_STATE);
   // Core task which handles the CFDP store and takes care of dumping it as TM using a VC directly
-  new PersistentSingleTmStoreTask(objects::CFDP_STORE_AND_TM_TASK, args.ipcStore,
+  auto* cfdpTask = new PersistentSingleTmStoreTask(
-                                  *args.stores.cfdpStore, *vc, persTmStore::DUMP_CFDP_STORE_DONE,
+      objects::CFDP_STORE_AND_TM_TASK, args.ipcStore, *args.stores.cfdpStore, *vc,
-                                  *SdCardManager::instance());
+      persTmStore::DUMP_CFDP_STORE_DONE, persTmStore::DUMP_CFDP_CANCELLED,
+      *SdCardManager::instance(), PTME_LOCKED);
+  cfdpTask->connectModeTreeParent(satsystem::com::SUBSYSTEM);
 
   ReturnValue_t result = (*args.ipCoreHandler)->connectModeTreeParent(satsystem::com::SUBSYSTEM);
   if (result != returnvalue::OK) {
@@ -957,20 +967,20 @@ void ObjectFactory::createStrComponents(PowerSwitchIF* pwrSwitcher) {
   auto strFdir = new StrFdir(objects::STAR_TRACKER);
   auto starTracker =
       new StarTrackerHandler(objects::STAR_TRACKER, objects::STR_COM_IF, starTrackerCookie,
-                             paramJsonFile, strComIF, pcdu::PDU1_CH2_STAR_TRACKER_5V);
+                             paramJsonFile, strComIF, power::PDU1_CH2_STAR_TRACKER_5V);
   starTracker->setPowerSwitcher(pwrSwitcher);
   starTracker->connectModeTreeParent(*strAssy);
   starTracker->setCustomFdir(strFdir);
 }
 
-void ObjectFactory::createImtqComponents(PowerSwitchIF* pwrSwitcher) {
+void ObjectFactory::createImtqComponents(PowerSwitchIF* pwrSwitcher, bool enableHkSets) {
   auto* imtqAssy = new ImtqAssembly(objects::IMTQ_ASSY);
   imtqAssy->connectModeTreeParent(satsystem::acs::ACS_SUBSYSTEM);
 
   new ImtqPollingTask(objects::IMTQ_POLLING, I2C_FATAL_ERRORS);
   I2cCookie* imtqI2cCookie = new I2cCookie(addresses::IMTQ, imtq::MAX_REPLY_SIZE, q7s::I2C_PL_EIVE);
   auto imtqHandler = new ImtqHandler(objects::IMTQ_HANDLER, objects::IMTQ_POLLING, imtqI2cCookie,
-                                     pcdu::Switches::PDU1_CH3_MGT_5V);
+                                     power::Switches::PDU1_CH3_MGT_5V, enableHkSets);
   imtqHandler->enableThermalModule(ThermalStateCfg());
   imtqHandler->setPowerSwitcher(pwrSwitcher);
   imtqHandler->connectModeTreeParent(*imtqAssy);
@@ -984,10 +994,10 @@ void ObjectFactory::createImtqComponents(PowerSwitchIF* pwrSwitcher) {
 #endif
 }
 
-void ObjectFactory::createBpxBatteryComponent() {
+void ObjectFactory::createBpxBatteryComponent(bool enableHkSets) {
   I2cCookie* bpxI2cCookie = new I2cCookie(addresses::BPX_BATTERY, 100, q7s::I2C_PL_EIVE);
-  BpxBatteryHandler* bpxHandler =
+  BpxBatteryHandler* bpxHandler = new BpxBatteryHandler(
-      new BpxBatteryHandler(objects::BPX_BATT_HANDLER, objects::I2C_COM_IF, bpxI2cCookie);
+      objects::BPX_BATT_HANDLER, objects::I2C_COM_IF, bpxI2cCookie, enableHkSets);
   bpxHandler->setStartUpImmediately();
   bpxHandler->setToGoToNormalMode(true);
 #if OBSW_DEBUG_BPX_BATT == 1

bsp_q7s/core/ObjectFactory.h

@@ -3,12 +3,12 @@
 
 #include <fsfw/returnvalues/returnvalue.h>
 #include <fsfw_hal/linux/spi/SpiComIF.h>
-#include <mission/core/GenericFactory.h>
+#include <mission/com/CcsdsIpCoreHandler.h>
-#include <mission/devices/HeaterHandler.h>
+#include <mission/com/PersistentLogTmStoreTask.h>
+#include <mission/genericFactory.h>
 #include <mission/system/objects/Stack5VHandler.h>
-#include <mission/tmtc/CcsdsIpCoreHandler.h>
+#include <mission/tcs/HeaterHandler.h>
 #include <mission/tmtc/CfdpTmFunnel.h>
-#include <mission/tmtc/PersistentLogTmStoreTask.h>
 #include <mission/tmtc/PusTmFunnel.h>
 
 #include <atomic>
@@ -24,6 +24,7 @@ class AcsBoardAssembly;
 class GpioIF;
 
 extern std::atomic_uint16_t I2C_FATAL_ERRORS;
+extern std::atomic_bool PTME_LOCKED;
 
 namespace ObjectFactory {
 
@@ -53,18 +54,19 @@ void produce(void* args);
 
 void createCommunicationInterfaces(LinuxLibgpioIF** gpioComIF, SerialComIF** uartComIF,
                                    SpiComIF** spiMainComIF, I2cComIF** i2cComIF);
-void createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher);
+void createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher,
+                          bool enableHkSets);
 void createPlPcduComponents(LinuxLibgpioIF* gpioComIF, SpiComIF* spiComIF,
                             PowerSwitchIF* pwrSwitcher, Stack5VHandler& stackHandler);
 void createTmpComponents();
 ReturnValue_t createRadSensorComponent(LinuxLibgpioIF* gpioComIF, Stack5VHandler& handler);
 void createAcsBoardGpios(GpioCookie& cookie);
 void createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF* gpioComIF, SerialComIF* uartComIF,
-                              PowerSwitchIF& pwrSwitcher);
+                              PowerSwitchIF& pwrSwitcher, bool enableHkSets);
 void createHeaterComponents(GpioIF* gpioIF, PowerSwitchIF* pwrSwitcher, HealthTableIF* healthTable,
                             HeaterHandler*& heaterHandler);
-void createImtqComponents(PowerSwitchIF* pwrSwitcher);
+void createImtqComponents(PowerSwitchIF* pwrSwitcher, bool enableHkSets);
-void createBpxBatteryComponent();
+void createBpxBatteryComponent(bool enableHkSets);
 void createStrComponents(PowerSwitchIF* pwrSwitcher);
 void createSolarArrayDeploymentComponents(PowerSwitchIF& pwrSwitcher, GpioIF& gpioIF);
 void createSyrlinksComponents(PowerSwitchIF* pwrSwitcher);

bsp_q7s/core/scheduling.cpp

@@ -3,6 +3,7 @@
 #include <fsfw/devicehandlers/DeviceCommunicationIF.h>
 #include <fsfw/subsystem/Subsystem.h>
 #include <linux/scheduling.h>
+#include <mission/tcs/Max31865Definitions.h>
 
 #include <iostream>
 #include <vector>
@@ -17,9 +18,8 @@
 #include "fsfw/tasks/FixedTimeslotTaskIF.h"
 #include "fsfw/tasks/PeriodicTaskIF.h"
 #include "fsfw/tasks/TaskFactory.h"
-#include "mission/core/pollingSeqTables.h"
+#include "mission/pollingSeqTables.h"
-#include "mission/core/scheduling.h"
+#include "mission/scheduling.h"
-#include "mission/devices/devicedefinitions/Max31865Definitions.h"
 #include "mission/utility/InitMission.h"
 
 /* This is configured for linux without CR */
@@ -193,8 +193,8 @@ void scheduling::initTasks() {
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("LOG_STORE_AND_TM", objects::LOG_STORE_AND_TM_TASK);
   }
-  PeriodicTaskIF* hkTmTask = factory->createPeriodicTask(
+  PeriodicTaskIF* hkTmTask =
-      "HK_PSTORE", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 1.0, nullptr);
+      factory->createPeriodicTask("HK_PSTORE", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 1.0, nullptr);
   result = hkTmTask->addComponent(objects::HK_STORE_AND_TM_TASK);
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("HK_STORE_AND_TM", objects::HK_STORE_AND_TM_TASK);
@@ -291,6 +291,14 @@ void scheduling::initTasks() {
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("STR_ASSY", objects::STR_ASSY);
   }
+  result = acsSysTask->addComponent(objects::GPS_0_HEALTH_DEV);
+  if (result != returnvalue::OK) {
+    scheduling::printAddObjectError("GPS_0_HEALTH_DEV", objects::GPS_0_HEALTH_DEV);
+  }
+  result = acsSysTask->addComponent(objects::GPS_1_HEALTH_DEV);
+  if (result != returnvalue::OK) {
+    scheduling::printAddObjectError("GPS_1_HEALTH_DEV", objects::GPS_1_HEALTH_DEV);
+  }
 
   PeriodicTaskIF* tcsSystemTask = factory->createPeriodicTask(
       "TCS_TASK", 50, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.5, missedDeadlineFunc, &RR_SCHEDULING);
@@ -338,9 +346,8 @@ void scheduling::initTasks() {
 
   // TODO: Use regular scheduler for this task
 #if OBSW_ADD_PLOC_MPSOC == 1
-  PeriodicTaskIF* mpsocHelperTask =
+  PeriodicTaskIF* mpsocHelperTask = factory->createPeriodicTask(
-      factory->createPeriodicTask("PLOC_MPSOC_HELPER", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.2,
+      "PLOC_MPSOC_HELPER", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.2, missedDeadlineFunc);
-                                  missedDeadlineFunc);
   result = mpsocHelperTask->addComponent(objects::PLOC_MPSOC_HELPER);
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("PLOC_MPSOC_HELPER", objects::PLOC_MPSOC_HELPER);
@@ -349,9 +356,8 @@ void scheduling::initTasks() {
 
   // TODO: Use regular scheduler for this task
 #if OBSW_ADD_PLOC_SUPERVISOR == 1
-  PeriodicTaskIF* supvHelperTask =
+  PeriodicTaskIF* supvHelperTask = factory->createPeriodicTask(
-      factory->createPeriodicTask("PLOC_SUPV_HELPER", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 1.0,
+      "PLOC_SUPV_HELPER", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 1.0, missedDeadlineFunc);
-                                  missedDeadlineFunc);
   result = supvHelperTask->addComponent(objects::PLOC_SUPERVISOR_HELPER);
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("PLOC_SUPV_HELPER", objects::PLOC_SUPERVISOR_HELPER);
@@ -499,8 +505,9 @@ void scheduling::createPstTasks(TaskFactory& factory, TaskDeadlineMissedFunction
 
   /* Polling Sequence Table Default */
 #if OBSW_ADD_SPI_TEST_CODE == 0
-  FixedTimeslotTaskIF* syrlinksPst = factory.createFixedTimeslotTask(
+  FixedTimeslotTaskIF* syrlinksPst =
-      "SYRLINKS", 65, PeriodicTaskIF::MINIMUM_STACK_SIZE * 4, 0.5, missedDeadlineFunc, &RR_SCHEDULING);
+      factory.createFixedTimeslotTask("SYRLINKS", 65, PeriodicTaskIF::MINIMUM_STACK_SIZE * 4, 0.5,
+                                      missedDeadlineFunc, &RR_SCHEDULING);
   result = pst::pstSyrlinks(syrlinksPst);
   if (result != returnvalue::OK) {
     if (result == FixedTimeslotTaskIF::SLOT_LIST_EMPTY) {
@@ -531,7 +538,7 @@ void scheduling::createPstTasks(TaskFactory& factory, TaskDeadlineMissedFunction
 
   FixedTimeslotTaskIF* gomSpacePstTask =
       factory.createFixedTimeslotTask("GS_PST_TASK", 65, PeriodicTaskIF::MINIMUM_STACK_SIZE * 4,
-                                      0.5, missedDeadlineFunc, &RR_SCHEDULING);
+                                      0.25, missedDeadlineFunc, &RR_SCHEDULING);
   result = pst::pstGompaceCan(gomSpacePstTask);
   if (result != returnvalue::OK) {
     if (result != FixedTimeslotTaskIF::SLOT_LIST_EMPTY) {

bsp_q7s/core/scheduling.h

@@ -4,7 +4,7 @@
 #include <vector>
 
 #include "fsfw/tasks/definitions.h"
-#include "mission/core/pollingSeqTables.h"
+#include "mission/pollingSeqTables.h"
 
 using pst::AcsPstCfg;
 

bsp_q7s/em/emObjectFactory.cpp

@@ -4,7 +4,7 @@
 #include <fsfw/health/HealthTableIF.h>
 #include <fsfw/power/DummyPowerSwitcher.h>
 #include <fsfw_hal/common/gpio/GpioCookie.h>
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
 #include <mission/system/tree/system.h>
 #include <mission/utility/DummySdCardManager.h>
 
@@ -13,13 +13,13 @@
 #include "bsp_q7s/core/ObjectFactory.h"
 #include "busConf.h"
 #include "devConf.h"
-#include "dummies/helpers.h"
+#include "dummies/helperFactory.h"
 #include "eive/objects.h"
 #include "fsfw_hal/linux/gpio/LinuxLibgpioIF.h"
 #include "linux/ObjectFactory.h"
 #include "linux/callbacks/gpioCallbacks.h"
-#include "mission/core/GenericFactory.h"
+#include "mission/genericFactory.h"
-#include "mission/system/tree/comModeTree.h"
+#include "mission/system/com/comModeTree.h"
 
 void ObjectFactory::produce(void* args) {
   ObjectFactory::setStatics();
@@ -29,6 +29,11 @@ void ObjectFactory::produce(void* args) {
   StorageManagerIF* ipcStore = nullptr;
   StorageManagerIF* tmStore = nullptr;
 
+  bool enableHkSets = false;
+#if OBSW_ENABLE_PERIODIC_HK == 1
+  enableHkSets = true;
+#endif
+
   PersistentTmStores stores;
   ObjectFactory::produceGenericObjects(&healthTable, &pusFunnel, &cfdpFunnel,
                                        *SdCardManager::instance(), &ipcStore, &tmStore, stores);
@@ -61,12 +66,12 @@ void ObjectFactory::produce(void* args) {
   auto* comCookieDummy = new ComCookieDummy();
   pwrSwitcher = new PcduHandlerDummy(objects::PCDU_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
 #else
-  createPcduComponents(gpioComIF, &pwrSwitcher);
+  createPcduComponents(gpioComIF, &pwrSwitcher, enableHkSets);
 #endif
 
   dummy::createDummies(dummyCfg, *pwrSwitcher, gpioComIF);
 
-  new CoreController(objects::CORE_CONTROLLER, I2C_FATAL_ERRORS);
+  new CoreController(objects::CORE_CONTROLLER, I2C_FATAL_ERRORS, enableHkSets);
 
   // Regular FM code, does not work for EM if the hardware is not connected
   // createPcduComponents(gpioComIF, &pwrSwitcher);
@@ -84,7 +89,7 @@ void ObjectFactory::produce(void* args) {
   // createRadSensorComponent(gpioComIF);
 
 #if OBSW_ADD_ACS_BOARD == 1
-  createAcsBoardComponents(gpioComIF, uartComIF, *pwrSwitcher);
+  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher);
 #else
   // Still add all GPIOs for EM.
   GpioCookie* acsBoardGpios = new GpioCookie();
@@ -93,7 +98,7 @@ void ObjectFactory::produce(void* args) {
 #endif
 
 #if OBSW_ADD_MGT == 1
-  createImtqComponents(pwrSwitcher);
+  createImtqComponents(pwrSwitcher, enableHkSets);
 #endif
 
 #if OBSW_ADD_SYRLINKS == 1
@@ -105,7 +110,7 @@ void ObjectFactory::produce(void* args) {
 #endif
 
 #if OBSW_ADD_BPX_BATTERY_HANDLER == 1
-  createBpxBatteryComponent();
+  createBpxBatteryComponent(enableHkSets);
 #endif
 
 #if OBSW_ADD_STAR_TRACKER == 1
@@ -131,9 +136,9 @@ void ObjectFactory::produce(void* args) {
   createScexComponents(q7s::UART_SCEX_DEV, pwrSwitcher, *SdCardManager::instance(), false,
                        pcdu::Switches::PDU1_CH5_SOLAR_CELL_EXP_5V);
 #endif
-  createAcsController(true);
+  createAcsController(true, enableHkSets);
-  HeaterHandler* heaterHandler = nullptr;
+  HeaterHandler* heaterHandler;
-  ObjectFactory::createGenericHeaterComponents(*gpioComIF, *pwrSwitcher, heaterHandler);
+  createHeaterComponents(gpioComIF, pwrSwitcher, healthTable, heaterHandler);
   createThermalController(*heaterHandler);
   satsystem::init();
 }

bsp_q7s/fmObjectFactory.cpp

@@ -1,7 +1,7 @@
 #include <bsp_q7s/callbacks/q7sGpioCallbacks.h>
 #include <fsfw/storagemanager/LocalPool.h>
 #include <fsfw/storagemanager/PoolManager.h>
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
 
 #include "OBSWConfig.h"
 #include "bsp_q7s/core/CoreController.h"
@@ -12,7 +12,7 @@
 #include "fsfw_hal/linux/gpio/LinuxLibgpioIF.h"
 #include "linux/ObjectFactory.h"
 #include "linux/callbacks/gpioCallbacks.h"
-#include "mission/core/GenericFactory.h"
+#include "mission/genericFactory.h"
 #include "mission/system/tree/system.h"
 #include "mission/tmtc/tmFilters.h"
 
@@ -24,6 +24,11 @@ void ObjectFactory::produce(void* args) {
   StorageManagerIF* ipcStore = nullptr;
   StorageManagerIF* tmStore = nullptr;
 
+  bool enableHkSets = false;
+#if OBSW_ENABLE_PERIODIC_HK == 1
+  enableHkSets = true;
+#endif
+
   PersistentTmStores stores;
   ObjectFactory::produceGenericObjects(&healthTable, &pusFunnel, &cfdpFunnel,
                                        *SdCardManager::instance(), &ipcStore, &tmStore, stores);
@@ -38,8 +43,8 @@ void ObjectFactory::produce(void* args) {
   q7s::gpioCallbacks::initSpiCsDecoder(gpioComIF);
   gpioCallbacks::disableAllDecoder(gpioComIF);
 
-  new CoreController(objects::CORE_CONTROLLER, I2C_FATAL_ERRORS);
+  new CoreController(objects::CORE_CONTROLLER, I2C_FATAL_ERRORS, enableHkSets);
-  createPcduComponents(gpioComIF, &pwrSwitcher);
+  createPcduComponents(gpioComIF, &pwrSwitcher, enableHkSets);
   auto* stackHandler = new Stack5VHandler(*pwrSwitcher);
 
 #if OBSW_ADD_RAD_SENSORS == 1
@@ -50,7 +55,7 @@ void ObjectFactory::produce(void* args) {
 #endif
 
 #if OBSW_ADD_ACS_BOARD == 1
-  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher);
+  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher, true);
 #endif
   HeaterHandler* heaterHandler;
   createHeaterComponents(gpioComIF, pwrSwitcher, healthTable, heaterHandler);
@@ -66,12 +71,12 @@ void ObjectFactory::produce(void* args) {
   createPayloadComponents(gpioComIF, *pwrSwitcher);
 
 #if OBSW_ADD_MGT == 1
-  createImtqComponents(pwrSwitcher);
+  createImtqComponents(pwrSwitcher, enableHkSets);
 #endif
   createReactionWheelComponents(gpioComIF, pwrSwitcher);
 
 #if OBSW_ADD_BPX_BATTERY_HANDLER == 1
-  createBpxBatteryComponent();
+  createBpxBatteryComponent(enableHkSets);
 #endif
 
 #if OBSW_ADD_STAR_TRACKER == 1
@@ -92,7 +97,7 @@ void ObjectFactory::produce(void* args) {
 
 #if OBSW_ADD_SCEX_DEVICE == 1
   createScexComponents(q7s::UART_SCEX_DEV, pwrSwitcher, *SdCardManager::instance(), false,
-                       pcdu::Switches::PDU1_CH5_SOLAR_CELL_EXP_5V);
+                       power::Switches::PDU1_CH5_SOLAR_CELL_EXP_5V);
 #endif
   /* Test Task */
 #if OBSW_ADD_TEST_CODE == 1
@@ -101,6 +106,6 @@ void ObjectFactory::produce(void* args) {
 
   createMiscComponents();
   createThermalController(*heaterHandler);
-  createAcsController(true);
+  createAcsController(true, enableHkSets);
   satsystem::init();
 }

bsp_q7s/fs/SdCardManager.cpp

@@ -312,7 +312,6 @@ void SdCardManager::resetState() {
 ReturnValue_t SdCardManager::updateSdStatePair() {
   using namespace std;
 
-  MutexGuard mg(sdLock, LOCK_TYPE, SD_LOCK_TIMEOUT, LOCK_CTX);
   std::error_code e;
   if (not filesystem::exists(SD_STATE_FILE, e)) {
     return STATUS_FILE_NEXISTS;
@@ -362,6 +361,7 @@ void SdCardManager::processSdStatusLine(std::string& line, uint8_t& idx, sd::SdC
           sdStates.second = sd::SdState::ON;
         }
       } else if (word == "off") {
+        MutexGuard mg(sdLock, LOCK_TYPE, SD_LOCK_TIMEOUT, LOCK_CTX);
         if (currentSd == sd::SdCard::SLOT_0) {
           sdStates.first = sd::SdState::OFF;
         } else {
@@ -371,6 +371,7 @@ void SdCardManager::processSdStatusLine(std::string& line, uint8_t& idx, sd::SdC
     }
 
     if (mountLine) {
+      MutexGuard mg(sdLock, LOCK_TYPE, SD_LOCK_TIMEOUT, LOCK_CTX);
       if (currentSd == sd::SdCard::SLOT_0) {
         sdStates.first = sd::SdState::MOUNTED;
       } else {
@@ -409,7 +410,6 @@ ReturnValue_t SdCardManager::updateSdCardStateFile() {
   if (cmdExecutor.getCurrentState() == CommandExecutor::States::PENDING) {
     return CommandExecutor::COMMAND_PENDING;
   }
-  MutexGuard mg(sdLock, LOCK_TYPE, SD_LOCK_TIMEOUT, LOCK_CTX);
   // Use q7hw utility and pipe the command output into the state file
   std::string updateCmd = "q7hw sd info all > " + std::string(SD_STATE_FILE);
   cmdExecutor.load(updateCmd, true, printCmdOutput);

bsp_q7s/fs/SdCardManager.h

@@ -228,7 +228,7 @@ class SdCardManager : public SystemObject, public SdCardMountedIF {
   MutexIF* prefLock = nullptr;
   MutexIF* defaultLock = nullptr;
   static constexpr MutexIF::TimeoutType LOCK_TYPE = MutexIF::TimeoutType::WAITING;
-  static constexpr uint32_t SD_LOCK_TIMEOUT = 250;
+  static constexpr uint32_t SD_LOCK_TIMEOUT = 100;
   static constexpr uint32_t OTHER_TIMEOUT = 20;
   static constexpr char LOCK_CTX[] = "SdCardManager";
 

bsp_q7s/obsw.cpp

@@ -14,8 +14,8 @@
 #include "core/scheduling.h"
 #include "fsfw/tasks/TaskFactory.h"
 #include "fsfw/version.h"
-#include "mission/acsDefs.h"
+#include "mission/acs/defs.h"
-#include "mission/comDefs.h"
+#include "mission/com/defs.h"
 #include "mission/system/tree/system.h"
 #include "q7sConfig.h"
 #include "watchdog/definitions.h"

common/config/devices/powerSwitcherList.h

@@ -1,6 +1,6 @@
 #ifndef FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
 #define FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
 
-#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
+#include <mission/power/gsDefs.h>
 
 #endif /* FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_ */

common/config/eive/definitions.h

@@ -15,6 +15,9 @@ static constexpr char OBSW_VERSION_FILE_NAME[] = "obsw_version.txt";
 static constexpr char OBSW_PATH[] = "/usr/bin/eive-obsw";
 static constexpr char OBSW_VERSION_FILE_PATH[] = "/usr/share/eive-obsw/obsw_version.txt";
 
+// ISO8601 timestamp.
+static constexpr char FILE_DATE_FORMAT[] = "%FT%H%M%SZ";
+
 static constexpr uint16_t EIVE_PUS_APID = 0x65;
 static constexpr uint16_t EIVE_CFDP_APID = 0x66;
 static constexpr uint16_t EIVE_LOCAL_CFDP_ENTITY_ID = EIVE_CFDP_APID;
@@ -55,6 +58,7 @@ static constexpr uint32_t CFDP_STORE_QUEUE_SIZE = 300;
 
 static constexpr uint32_t MAX_PUS_FUNNEL_QUEUE_DEPTH = 100;
 static constexpr uint32_t MAX_CFDP_FUNNEL_QUEUE_DEPTH = 80;
+static constexpr uint32_t HK_SERVICE_QUEUE_DEPTH = 60;
 
 static constexpr uint32_t MAX_STORED_CMDS_UDP = 150;
 static constexpr uint32_t MAX_STORED_CMDS_TCP = 180;

common/config/eive/objects.h

@@ -43,6 +43,8 @@ enum commonObjects : uint32_t {
   RW4 = 0x44120350,
   STAR_TRACKER = 0x44130001,
   GPS_CONTROLLER = 0x44130045,
+  GPS_0_HEALTH_DEV = 0x44130046,
+  GPS_1_HEALTH_DEV = 0x44130047,
 
   IMTQ_POLLING = 0x44140013,
   IMTQ_HANDLER = 0x44140014,

dummies/AcuDummy.cpp

@@ -1,6 +1,6 @@
 #include "AcuDummy.h"
 
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
 
 AcuDummy::AcuDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/BpxDummy.cpp

@@ -1,6 +1,6 @@
 #include "BpxDummy.h"
 
-#include <mission/devices/devicedefinitions/BpxBatteryDefinitions.h>
+#include <mission/power/bpxBattDefs.h>
 
 BpxDummy::BpxDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/CMakeLists.txt

@@ -26,6 +26,6 @@ target_sources(
          CoreControllerDummy.cpp
          PlocMpsocDummy.cpp
          PlocSupervisorDummy.cpp
-         helpers.cpp
+         helperFactory.cpp
          MgmRm3100Dummy.cpp
          Tmp1075Dummy.cpp)

dummies/CoreControllerDummy.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include <fsfw/controller/ExtendedControllerBase.h>
-#include <mission/devices/devicedefinitions/susMax1227Helpers.h>
+#include <mission/acs/susMax1227Helpers.h>
 
 class CoreControllerDummy : public ExtendedControllerBase {
  public:

dummies/GpsCtrlDummy.h

@@ -2,7 +2,7 @@
 #define DUMMIES_GPSCTRLDUMMY_H_
 
 #include <fsfw/controller/ExtendedControllerBase.h>
-#include <mission/devices/devicedefinitions/GPSDefinitions.h>
+#include <mission/acs/archive/GPSDefinitions.h>
 
 class GpsCtrlDummy : public ExtendedControllerBase {
  public:

dummies/GpsDhbDummy.cpp

@@ -1,5 +1,5 @@
 #include <dummies/GpsDhbDummy.h>
-#include <mission/devices/devicedefinitions/GPSDefinitions.h>
+#include <mission/acs/archive/GPSDefinitions.h>
 
 GpsDhbDummy::GpsDhbDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/GyroAdisDummy.cpp

@@ -1,6 +1,6 @@
 #include "GyroAdisDummy.h"
 
-#include <mission/devices/devicedefinitions/gyroAdisHelpers.h>
+#include <mission/acs/gyroAdisHelpers.h>
 
 GyroAdisDummy::GyroAdisDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie), dataset(this) {}
@@ -46,7 +46,7 @@ ReturnValue_t GyroAdisDummy::initializeLocalDataPool(localpool::DataPool &localD
   localDataPoolMap.emplace(adis1650x::ACCELERATION_X, new PoolEntry<double>({0.0}));
   localDataPoolMap.emplace(adis1650x::ACCELERATION_Y, new PoolEntry<double>({0.0}));
   localDataPoolMap.emplace(adis1650x::ACCELERATION_Z, new PoolEntry<double>({0.0}));
-  localDataPoolMap.emplace(adis1650x::TEMPERATURE, new PoolEntry<float>({0.0}));
+  localDataPoolMap.emplace(adis1650x::TEMPERATURE, new PoolEntry<float>({10.0}, true));
 
   return returnvalue::OK;
 }

dummies/GyroAdisDummy.h

@@ -2,7 +2,7 @@
 #define DUMMIES_GYROADISDUMMY_H_
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
-#include <mission/devices/devicedefinitions/gyroAdisHelpers.h>
+#include <mission/acs/gyroAdisHelpers.h>
 
 class GyroAdisDummy : public DeviceHandlerBase {
  public:

dummies/ImtqDummy.cpp

@@ -1,6 +1,6 @@
 #include "ImtqDummy.h"
 
-#include <mission/devices/devicedefinitions/imtqHelpers.h>
+#include <mission/acs/imtqHelpers.h>
 
 ImtqDummy::ImtqDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/Max31865Dummy.cpp

@@ -1,5 +1,7 @@
 #include "Max31865Dummy.h"
 
+#include "fsfw/datapool/PoolReadGuard.h"
+
 using namespace returnvalue;
 
 Max31865Dummy::Max31865Dummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
@@ -28,15 +30,20 @@ ReturnValue_t Max31865Dummy::initializeLocalDataPool(localpool::DataPool &localD
                                                      LocalDataPoolManager &poolManager) {
   using namespace MAX31865;
   localDataPoolMap.emplace(static_cast<lp_id_t>(PoolIds::RTD_VALUE), new PoolEntry<float>({0}));
-  localDataPoolMap.emplace(static_cast<lp_id_t>(PoolIds::TEMPERATURE_C), new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(static_cast<lp_id_t>(PoolIds::TEMPERATURE_C),
+                           new PoolEntry<float>({10.0}, true));
   localDataPoolMap.emplace(static_cast<lp_id_t>(PoolIds::LAST_FAULT_BYTE),
                            new PoolEntry<uint8_t>({0}));
   localDataPoolMap.emplace(static_cast<lp_id_t>(PoolIds::FAULT_BYTE), new PoolEntry<uint8_t>({0}));
   return OK;
 }
 
-void Max31865Dummy::setTemperature(float temperature) {
+void Max31865Dummy::setTemperature(float temperature, bool valid) {
-  set.temperatureCelcius.value = temperature;
+  PoolReadGuard pg(&set);
+  if (pg.getReadResult() == returnvalue::OK) {
+    set.temperatureCelcius.value = temperature;
+    set.setValidity(valid, true);
+  }
 }
 
 LocalPoolDataSetBase *Max31865Dummy::getDataSetHandle(sid_t sid) { return &set; }

dummies/Max31865Dummy.h

@@ -1,15 +1,16 @@
 #ifndef EIVE_OBSW_MAX31865DUMMY_H
 #define EIVE_OBSW_MAX31865DUMMY_H
 
+#include <mission/tcs/Max31865Definitions.h>
+
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
-#include "mission/devices/devicedefinitions/Max31865Definitions.h"
 
 class Max31865Dummy : public DeviceHandlerBase {
  public:
   Max31865Dummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie);
   Max31865Dummy(object_id_t objectId, CookieIF *comCookie);
 
-  void setTemperature(float temperature);
+  void setTemperature(float temperature, bool setValid);
 
  private:
   MAX31865::PrimarySet set;

dummies/MgmLIS3MDLDummy.cpp

@@ -40,7 +40,7 @@ uint32_t MgmLIS3MDLDummy::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) {
 
 ReturnValue_t MgmLIS3MDLDummy::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                                        LocalDataPoolManager &poolManager) {
-  localDataPoolMap.emplace(mgmLis3::TEMPERATURE_CELCIUS, new PoolEntry<float>({0.0}));
+  localDataPoolMap.emplace(mgmLis3::TEMPERATURE_CELCIUS, new PoolEntry<float>({10.0}, true));
   localDataPoolMap.emplace(mgmLis3::FIELD_STRENGTHS,
                            new PoolEntry<float>({1.02, 0.56, -0.78}, true));
   return returnvalue::OK;

dummies/P60DockDummy.cpp

@@ -1,6 +1,8 @@
 #include "P60DockDummy.h"
 
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
+
+#include "fsfw/datapool/PoolReadGuard.h"
 
 P60DockDummy::P60DockDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/P60DockDummy.h

@@ -3,6 +3,8 @@
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
 
+#include "mission/power/gsDefs.h"
+
 class P60DockDummy : public DeviceHandlerBase {
  public:
   static const DeviceCommandId_t SIMPLE_COMMAND = 1;
@@ -15,6 +17,8 @@ class P60DockDummy : public DeviceHandlerBase {
   virtual ~P60DockDummy();
 
  protected:
+  lp_var_t<float> temp1 = lp_var_t<float>(this, P60Dock::pool::P60DOCK_TEMPERATURE_1);
+  lp_var_t<float> temp2 = lp_var_t<float>(this, P60Dock::pool::P60DOCK_TEMPERATURE_2);
   void doStartUp() override;
   void doShutDown() override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;

dummies/PcduHandlerDummy.cpp

@@ -1,9 +1,13 @@
 #include "PcduHandlerDummy.h"
 
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
+
+#include "mission/power/defs.h"
 
 PcduHandlerDummy::PcduHandlerDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
-    : DeviceHandlerBase(objectId, comif, comCookie), dummySwitcher(objectId, 18, 18, false) {}
+    : DeviceHandlerBase(objectId, comif, comCookie), dummySwitcher(objectId, 18, 18, false) {
+  switcherLock = MutexFactory::instance()->createMutex();
+}
 
 PcduHandlerDummy::~PcduHandlerDummy() {}
 
@@ -44,6 +48,17 @@ ReturnValue_t PcduHandlerDummy::initializeLocalDataPool(localpool::DataPool &loc
 }
 
 ReturnValue_t PcduHandlerDummy::sendSwitchCommand(power::Switch_t switchNr, ReturnValue_t onOff) {
+  if (onOff == SWITCH_ON) {
+    triggerEvent(power::SWITCH_CMD_SENT, true, switchNr);
+  } else {
+    triggerEvent(power::SWITCH_CMD_SENT, false, switchNr);
+  }
+  {
+    MutexGuard mg(switcherLock);
+    // To simulate a real PCDU, remember the switch change to trigger a SWITCH_HAS_CHANGED event
+    // at a later stage.
+    switchChangeArray[switchNr] = true;
+  }
   return dummySwitcher.sendSwitchCommand(switchNr, onOff);
 }
 
@@ -60,3 +75,22 @@ ReturnValue_t PcduHandlerDummy::getFuseState(uint8_t fuseNr) const {
 }
 
 uint32_t PcduHandlerDummy::getSwitchDelayMs(void) const { return dummySwitcher.getSwitchDelayMs(); }
+
+void PcduHandlerDummy::performOperationHook() {
+  SwitcherBoolArray switcherChangeCopy{};
+  {
+    MutexGuard mg(switcherLock);
+    std::memcpy(switcherChangeCopy.data(), switchChangeArray.data(), switchChangeArray.size());
+  }
+  for (uint8_t idx = 0; idx < switcherChangeCopy.size(); idx++) {
+    if (switcherChangeCopy[idx]) {
+      if (dummySwitcher.getSwitchState(idx) == PowerSwitchIF::SWITCH_ON) {
+        triggerEvent(power::SWITCH_HAS_CHANGED, true, idx);
+      } else {
+        triggerEvent(power::SWITCH_HAS_CHANGED, false, idx);
+      }
+      MutexGuard mg(switcherLock);
+      switchChangeArray[idx] = false;
+    }
+  }
+}

dummies/PcduHandlerDummy.h

@@ -15,8 +15,12 @@ class PcduHandlerDummy : public DeviceHandlerBase, public PowerSwitchIF {
   virtual ~PcduHandlerDummy();
 
  protected:
+  MutexIF *switcherLock;
   DummyPowerSwitcher dummySwitcher;
+  using SwitcherBoolArray = std::array<bool, 18>;
 
+  SwitcherBoolArray switchChangeArray{};
+  void performOperationHook() override;
   void doStartUp() override;
   void doShutDown() override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;

dummies/PduDummy.cpp

@@ -1,6 +1,6 @@
 #include "PduDummy.h"
 
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
 
 PduDummy::PduDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie),

dummies/PduDummy.h

@@ -2,8 +2,7 @@
 #define DUMMIES_PDUDUMMY_H_
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
-
+#include <mission/power/gsDefs.h>
-#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
 
 class PduDummy : public DeviceHandlerBase {
  public:

dummies/PlPcduDummy.cpp

@@ -1,6 +1,6 @@
 #include "PlPcduDummy.h"
 
-#include <mission/devices/devicedefinitions/GomspaceDefinitions.h>
+#include <mission/power/gsDefs.h>
 
 PlPcduDummy::PlPcduDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/PlPcduDummy.h

@@ -2,7 +2,7 @@
 #define DUMMIES_PLPCDUDUMMY_H_
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
-#include <mission/devices/devicedefinitions/payloadPcduDefinitions.h>
+#include <mission/payload/payloadPcduDefinitions.h>
 
 class PlPcduDummy : public DeviceHandlerBase {
  public:

dummies/PlocMpsocDummy.h

@@ -2,6 +2,8 @@
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
 
+#include "mission/power/defs.h"
+
 class PlocMpsocDummy : public DeviceHandlerBase {
  public:
   static const DeviceCommandId_t SIMPLE_COMMAND = 1;

dummies/PlocSupervisorDummy.cpp

@@ -1,8 +1,10 @@
 #include "PlocSupervisorDummy.h"
 
 PlocSupervisorDummy::PlocSupervisorDummy(object_id_t objectId, object_id_t comif,
-                                         CookieIF *comCookie)
+                                         CookieIF *comCookie, PowerSwitchIF &pwrSwitcher)
-    : DeviceHandlerBase(objectId, comif, comCookie) {}
+    : DeviceHandlerBase(objectId, comif, comCookie) {
+  setPowerSwitcher(&pwrSwitcher);
+}
 
 PlocSupervisorDummy::~PlocSupervisorDummy() {}
 
@@ -42,3 +44,10 @@ ReturnValue_t PlocSupervisorDummy::initializeLocalDataPool(localpool::DataPool &
                                                            LocalDataPoolManager &poolManager) {
   return returnvalue::OK;
 }
+
+ReturnValue_t PlocSupervisorDummy::getSwitches(const uint8_t **switches,
+                                               uint8_t *numberOfSwitches) {
+  *numberOfSwitches = 1;
+  *switches = reinterpret_cast<const uint8_t *>(&switchId);
+  return returnvalue::OK;
+}

dummies/PlocSupervisorDummy.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
+#include <mission/power/defs.h>
 
 class PlocSupervisorDummy : public DeviceHandlerBase {
  public:
@@ -10,10 +11,13 @@ class PlocSupervisorDummy : public DeviceHandlerBase {
   static const uint8_t SIMPLE_COMMAND_DATA = 1;
   static const uint8_t PERIODIC_REPLY_DATA = 2;
 
-  PlocSupervisorDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie);
+  PlocSupervisorDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie,
+                      PowerSwitchIF &pwrSwitcher);
   virtual ~PlocSupervisorDummy();
 
  protected:
+  const power::Switches switchId = power::Switches::PDU1_CH6_PLOC_12V;
+
   void doStartUp() override;
   void doShutDown() override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;
@@ -27,4 +31,5 @@ class PlocSupervisorDummy : public DeviceHandlerBase {
   uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
   ReturnValue_t initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                         LocalDataPoolManager &poolManager) override;
+  ReturnValue_t getSwitches(const uint8_t **switches, uint8_t *numberOfSwitches) override;
 };

dummies/RwDummy.cpp

@@ -1,6 +1,6 @@
 #include "RwDummy.h"
 
-#include <mission/devices/devicedefinitions/rwHelpers.h>
+#include <mission/acs/rwHelpers.h>
 
 RwDummy::RwDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}

dummies/StarTrackerDummy.cpp

@@ -1,6 +1,6 @@
 #include "StarTrackerDummy.h"
 
-#include <linux/devices/devicedefinitions/StarTrackerDefinitions.h>
+#include <mission/acs/str/strHelpers.h>
 
 StarTrackerDummy::StarTrackerDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}
@@ -40,7 +40,7 @@ uint32_t StarTrackerDummy::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo)
 
 ReturnValue_t StarTrackerDummy::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                                         LocalDataPoolManager &poolManager) {
-  localDataPoolMap.emplace(startracker::MCU_TEMPERATURE, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(startracker::MCU_TEMPERATURE, new PoolEntry<float>({10.0}, true));
 
   localDataPoolMap.emplace(startracker::TICKS_SOLUTION_SET, new PoolEntry<uint32_t>({0}));
   localDataPoolMap.emplace(startracker::TIME_SOLUTION_SET, new PoolEntry<uint64_t>({0}));

dummies/SusDummy.h

@@ -2,7 +2,7 @@
 #define DUMMIES_SUSDUMMY_H_
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
-#include <mission/devices/devicedefinitions/susMax1227Helpers.h>
+#include <mission/acs/susMax1227Helpers.h>
 
 class SusDummy : public DeviceHandlerBase {
  public:

dummies/SyrlinksDummy.cpp

@@ -1,6 +1,6 @@
 #include "SyrlinksDummy.h"
 
-#include <mission/devices/devicedefinitions/SyrlinksDefinitions.h>
+#include <mission/com/syrlinksDefs.h>
 
 SyrlinksDummy::SyrlinksDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
     : DeviceHandlerBase(objectId, comif, comCookie) {}
@@ -40,7 +40,7 @@ uint32_t SyrlinksDummy::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { r
 
 ReturnValue_t SyrlinksDummy::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                                      LocalDataPoolManager &poolManager) {
-  localDataPoolMap.emplace(syrlinks::TEMP_BASEBAND_BOARD, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(syrlinks::TEMP_BASEBAND_BOARD, new PoolEntry<float>({10}, true));
-  localDataPoolMap.emplace(syrlinks::TEMP_POWER_AMPLIFIER, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(syrlinks::TEMP_POWER_AMPLIFIER, new PoolEntry<float>({10}, true));
   return returnvalue::OK;
 }

dummies/TemperatureSensorInserter.cpp

@@ -9,7 +9,7 @@
 TemperatureSensorInserter::TemperatureSensorInserter(object_id_t objectId,
                                                      Max31865DummyMap tempSensorDummies_,
                                                      Tmp1075DummyMap tempTmpSensorDummies_)
-    : SystemObject(objects::THERMAL_TEMP_INSERTER),
+    : SystemObject(objectId),
       max31865DummyMap(std::move(tempSensorDummies_)),
       tmp1075DummyMap(std::move(tempTmpSensorDummies_)) {}
 
@@ -22,6 +22,32 @@ ReturnValue_t TemperatureSensorInserter::initialize() {
 }
 
 ReturnValue_t TemperatureSensorInserter::performOperation(uint8_t opCode) {
+  // TODO: deviceSensors
+  if (not tempsWereInitialized) {
+    for (auto& rtdDummy : max31865DummyMap) {
+      rtdDummy.second->setTemperature(10, true);
+    }
+    for (auto& tmpDummy : tmp1075DummyMap) {
+      tmpDummy.second->setTemperature(10, true);
+    }
+    tempsWereInitialized = true;
+  }
+
+  if (cycles == 10) {
+    max31865DummyMap[objects::RTD_9_IC12_HPA]->setTemperature(-100, true);
+    max31865DummyMap[objects::RTD_11_IC14_MPA]->setTemperature(-100, true);
+  }
+
+  if (cycles == 35) {
+    max31865DummyMap[objects::RTD_9_IC12_HPA]->setTemperature(0, true);
+    max31865DummyMap[objects::RTD_11_IC14_MPA]->setTemperature(0, true);
+    max31865DummyMap[objects::RTD_2_IC5_4K_CAMERA]->setTemperature(-100, true);
+  }
+  if (cycles == 60) {
+    max31865DummyMap[objects::RTD_9_IC12_HPA]->setTemperature(-100, true);
+    max31865DummyMap[objects::RTD_11_IC14_MPA]->setTemperature(0, true);
+  }
+
   /*
   ReturnValue_t result = max31865PlocHeatspreaderSet.read();
   if (result != returnvalue::OK) {
@@ -36,5 +62,7 @@ ReturnValue_t TemperatureSensorInserter::performOperation(uint8_t opCode) {
   }
   max31865PlocHeatspreaderSet.commit();
   */
+  cycles++;
   return returnvalue::OK;
 }
+ReturnValue_t TemperatureSensorInserter::initializeAfterTaskCreation() { return returnvalue::OK; }

dummies/TemperatureSensorInserter.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include <fsfw/controller/ExtendedControllerBase.h>
-#include <mission/devices/devicedefinitions/Max31865Definitions.h>
+#include <mission/tcs/Max31865Definitions.h>
 
 #include "Max31865Dummy.h"
 #include "Tmp1075Dummy.h"
@@ -14,6 +14,7 @@ class TemperatureSensorInserter : public ExecutableObjectIF, public SystemObject
                                      Tmp1075DummyMap tempTmpSensorDummies_);
 
   ReturnValue_t initialize() override;
+  ReturnValue_t initializeAfterTaskCreation() override;
 
  protected:
   ReturnValue_t performOperation(uint8_t opCode) override;
@@ -23,6 +24,8 @@ class TemperatureSensorInserter : public ExecutableObjectIF, public SystemObject
   Tmp1075DummyMap tmp1075DummyMap;
   enum TestCase { NONE = 0, COOL_SYRLINKS = 1 };
   int iteration = 0;
+  uint32_t cycles = 0;
+  bool tempsWereInitialized = false;
   bool performTest = false;
   TestCase testCase = TestCase::NONE;
 

dummies/Tmp1075Dummy.cpp

@@ -1,6 +1,7 @@
 #include "Tmp1075Dummy.h"
 
-#include "mission/devices/devicedefinitions/Tmp1075Definitions.h"
+#include <fsfw/datapool/PoolReadGuard.h>
+#include <mission/tcs/Tmp1075Definitions.h>
 
 using namespace returnvalue;
 
@@ -26,11 +27,16 @@ ReturnValue_t Tmp1075Dummy::scanForReply(const uint8_t *start, size_t len,
 ReturnValue_t Tmp1075Dummy::interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) {
   return 0;
 }
+void Tmp1075Dummy::setTemperature(float temperature, bool valid) {
+  PoolReadGuard pg(&set);
+  set.temperatureCelcius.value = temperature;
+  set.setValidity(valid, true);
+}
 void Tmp1075Dummy::fillCommandAndReplyMap() {}
 uint32_t Tmp1075Dummy::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 1000; }
 ReturnValue_t Tmp1075Dummy::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                                     LocalDataPoolManager &poolManager) {
-  localDataPoolMap.emplace(TMP1075::TEMPERATURE_C_TMP1075, new PoolEntry<float>({0.0}));
+  localDataPoolMap.emplace(TMP1075::TEMPERATURE_C_TMP1075, new PoolEntry<float>({10.0}, true));
   return OK;
 }
 LocalPoolDataSetBase *Tmp1075Dummy::getDataSetHandle(sid_t sid) { return &set; }

dummies/Tmp1075Dummy.h

@@ -1,12 +1,14 @@
 #ifndef EIVE_OBSW_TMP1075DUMMY_H
 #define EIVE_OBSW_TMP1075DUMMY_H
 
+#include <mission/tcs/Tmp1075Definitions.h>
+
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
-#include "mission/devices/devicedefinitions/Tmp1075Definitions.h"
 
 class Tmp1075Dummy : public DeviceHandlerBase {
  public:
   Tmp1075Dummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie);
+  void setTemperature(float temperature, bool setValid);
 
  private:
   TMP1075::Tmp1075Dataset set;

dummies/helperFactory.cpp

@@ -1,4 +1,4 @@
-#include "helpers.h"
+#include "helperFactory.h"
 
 #include <dummies/AcuDummy.h>
 #include <dummies/BpxDummy.h>
@@ -24,19 +24,20 @@
 #include <dummies/StarTrackerDummy.h>
 #include <dummies/SusDummy.h>
 #include <dummies/SyrlinksDummy.h>
+#include <fsfw/devicehandlers/HealthDevice.h>
 #include <fsfw_hal/common/gpio/GpioIF.h>
+#include <mission/power/gsDefs.h>
+#include <mission/system/acs/ImtqAssembly.h>
+#include <mission/system/acs/StrAssembly.h>
 #include <mission/system/objects/CamSwitcher.h>
-#include <mission/system/objects/ImtqAssembly.h>
-#include <mission/system/objects/StrAssembly.h>
 #include <mission/system/objects/TcsBoardAssembly.h>
 
 #include "TemperatureSensorInserter.h"
 #include "dummies/Max31865Dummy.h"
 #include "dummies/Tmp1075Dummy.h"
-#include "mission/core/GenericFactory.h"
+#include "mission/genericFactory.h"
-#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
+#include "mission/system/acs/acsModeTree.h"
-#include "mission/system/tree/acsModeTree.h"
+#include "mission/system/com/comModeTree.h"
-#include "mission/system/tree/comModeTree.h"
 #include "mission/system/tree/payloadModeTree.h"
 #include "mission/system/tree/tcsModeTree.h"
 
@@ -56,7 +57,7 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
   rws[1] = new RwDummy(objects::RW2, objects::DUMMY_COM_IF, comCookieDummy);
   rws[2] = new RwDummy(objects::RW3, objects::DUMMY_COM_IF, comCookieDummy);
   rws[3] = new RwDummy(objects::RW4, objects::DUMMY_COM_IF, comCookieDummy);
-  ObjectFactory::createRwAssy(pwrSwitcher, pcdu::Switches::PDU2_CH2_RW_5V, rws, rwIds);
+  ObjectFactory::createRwAssy(pwrSwitcher, power::Switches::PDU2_CH2_RW_5V, rws, rwIds);
   new SaDeplDummy(objects::SOLAR_ARRAY_DEPL_HANDLER);
   auto* strAssy = new StrAssembly(objects::STR_ASSY);
   strAssy->connectModeTreeParent(satsystem::acs::ACS_SUBSYSTEM);
@@ -210,7 +211,7 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
     }
   }
   auto* camSwitcher =
-      new CamSwitcher(objects::CAM_SWITCHER, pwrSwitcher, pcdu::Switches::PDU2_CH8_PAYLOAD_CAMERA);
+      new CamSwitcher(objects::CAM_SWITCHER, pwrSwitcher, power::Switches::PDU2_CH8_PAYLOAD_CAMERA);
   camSwitcher->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
   auto* scexDummy = new ScexDummy(objects::SCEX, objects::DUMMY_COM_IF, comCookieDummy);
   scexDummy->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
@@ -221,8 +222,8 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
     auto* plocMpsocDummy =
         new PlocMpsocDummy(objects::PLOC_MPSOC_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
     plocMpsocDummy->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
-    auto* plocSupervisorDummy = new PlocSupervisorDummy(objects::PLOC_SUPERVISOR_HANDLER,
+    auto* plocSupervisorDummy = new PlocSupervisorDummy(
-                                                        objects::DUMMY_COM_IF, comCookieDummy);
+        objects::PLOC_SUPERVISOR_HANDLER, objects::DUMMY_COM_IF, comCookieDummy, pwrSwitcher);
     plocSupervisorDummy->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
   }
 }

fsfw

@@ -1 +1 @@
-Subproject commit b814e7198f720cad0fb063f54644d5dbc92c165c
+Subproject commit 6650c293da09d8851c2bd6c4d6e6c5a8390d003e

generators/bsp_hosted_events.csv

@@ -86,66 +86,65 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 10802;0x2a32;SERIALIZATION_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10803;0x2a33;FILESTORE_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10804;0x2a34;FILENAME_TOO_LARGE_ERROR;LOW;P1: Transaction step ID, P2: 0 for source file name, 1 for dest file name;fsfw/src/fsfw/cfdp/handler/defs.h
-11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;The limits for the rotation in safe mode were violated.;mission/acsDefs.h
+11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;No description;mission/acs/defs.h
-11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;The system has recovered from a safe rate rotation violation.;mission/acsDefs.h
+11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;No description;mission/acs/defs.h
-11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;Multiple RWs are invalid, uncommandable and therefore higher ACS modes cannot be maintained.;mission/acsDefs.h
+11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;No description;mission/acs/defs.h
-11203;0x2bc3;MEKF_INVALID_INFO;INFO;MEKF was not able to compute a solution. P1: MEKF state on exit;mission/acsDefs.h
+11203;0x2bc3;MEKF_INVALID_INFO;INFO;No description;mission/acs/defs.h
-11204;0x2bc4;MEKF_RECOVERY;INFO;MEKF is able to compute a solution again.;mission/acsDefs.h
+11204;0x2bc4;MEKF_RECOVERY;INFO;No description;mission/acs/defs.h
-11205;0x2bc5;MEKF_AUTOMATIC_RESET;INFO;MEKF performed an automatic reset after detection of nonfinite values.;mission/acsDefs.h
+11205;0x2bc5;MEKF_INVALID_MODE_VIOLATION;HIGH;No description;mission/acs/defs.h
-11206;0x2bc6;MEKF_INVALID_MODE_VIOLATION;HIGH;MEKF was not able to compute a solution during any pointing ACS mode for a prolonged time.;mission/acsDefs.h
+11206;0x2bc6;SAFE_MODE_CONTROLLER_FAILURE;HIGH;No description;mission/acs/defs.h
-11207;0x2bc7;SAFE_MODE_CONTROLLER_FAILURE;HIGH;The ACS safe mode controller was not able to compute a solution and has failed. P1: Missing information about magnetic field, P2: Missing information about rotational rate;mission/acsDefs.h
+11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/power/defs.h
-11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/power/defs.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/power/defs.h
-11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/devices/devicedefinitions/powerDefinitions.h
+11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/power/defs.h
-11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/devices/devicedefinitions/powerDefinitions.h
+11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
-11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/devices/HeaterHandler.h
+11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
-11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/devices/HeaterHandler.h
+11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/tcs/HeaterHandler.h
-11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/devices/HeaterHandler.h
+11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/tcs/HeaterHandler.h
-11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/devices/HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;LOW;No description;mission/tcs/HeaterHandler.h
-11404;0x2c8c;SWITCH_ALREADY_ON;LOW;No description;mission/devices/HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;No description;mission/tcs/HeaterHandler.h
-11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;No description;mission/devices/HeaterHandler.h
+11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/tcs/HeaterHandler.h
-11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/devices/HeaterHandler.h
+11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/tcs/HeaterHandler.h
-11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/devices/HeaterHandler.h
+11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
-11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/devices/SolarArrayDeploymentHandler.h
+11501;0x2ced;BURN_PHASE_DONE;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
-11501;0x2ced;BURN_PHASE_DONE;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/devices/SolarArrayDeploymentHandler.h
+11502;0x2cee;MAIN_SWITCH_ON_TIMEOUT;LOW;No description;mission/SolarArrayDeploymentHandler.h
-11502;0x2cee;MAIN_SWITCH_ON_TIMEOUT;LOW;No description;mission/devices/SolarArrayDeploymentHandler.h
+11503;0x2cef;MAIN_SWITCH_OFF_TIMEOUT;LOW;No description;mission/SolarArrayDeploymentHandler.h
-11503;0x2cef;MAIN_SWITCH_OFF_TIMEOUT;LOW;No description;mission/devices/SolarArrayDeploymentHandler.h
+11504;0x2cf0;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11504;0x2cf0;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11505;0x2cf1;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11505;0x2cf1;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11506;0x2cf2;DEPL_SA1_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11506;0x2cf2;DEPL_SA1_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11507;0x2cf3;DEPL_SA2_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11507;0x2cf3;DEPL_SA2_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11508;0x2cf4;AUTONOMOUS_DEPLOYMENT_COMPLETED;INFO;No description;mission/SolarArrayDeploymentHandler.h
-11508;0x2cf4;AUTONOMOUS_DEPLOYMENT_COMPLETED;INFO;No description;mission/devices/SolarArrayDeploymentHandler.h
+11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/payload/PlocMpsocHandler.h
-11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
+11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/payload/PlocMpsocHandler.h
-11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
+11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/payload/PlocMpsocHandler.h
-11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
+11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/payload/PlocMpsocHandler.h
-11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
+11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/payload/PlocMpsocHandler.h
-11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
+11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/acs/ImtqHandler.h
-11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/ImtqHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/acs/rwHelpers.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/devicedefinitions/rwHelpers.h
+11802;0x2e1a;RESET_OCCURED;LOW;No description;mission/acs/rwHelpers.h
-11802;0x2e1a;RESET_OCCURED;LOW;No description;mission/devices/devicedefinitions/rwHelpers.h
+11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;mission/acs/str/StarTrackerHandler.h
-11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
+11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;mission/acs/str/StarTrackerHandler.h
-11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/payload/PlocSupervisorHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
+12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/payload/PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/devices/ploc/PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/payload/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/devices/ploc/PlocSupervisorHandler.h
+12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/payload/PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
+12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/payload/PlocSupervisorHandler.h
-12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/devices/ploc/PlocSupervisorHandler.h
+12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/payload/PlocSupervisorHandler.h
-12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
+12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/payload/PlocSupervisorHandler.h
-12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/devices/ploc/PlocSupervisorHandler.h
+12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/payload/PlocSupervisorHandler.h
-12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/devices/ploc/PlocSupervisorHandler.h
 12100;0x2f44;SANITIZATION_FAILED;LOW;No description;bsp_q7s/fs/SdCardManager.h
 12101;0x2f45;MOUNTED_SD_CARD;INFO;No description;bsp_q7s/fs/SdCardManager.h
-12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
+12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/payload/PlocMemoryDumper.h
-12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
+12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/payload/PlocMemoryDumper.h
-12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
+12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/payload/PlocMemoryDumper.h
 12401;0x3071;INVALID_TC_FRAME;HIGH;No description;linux/ipcore/PdecHandler.h
 12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/ipcore/PdecHandler.h
 12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/ipcore/PdecHandler.h
@@ -157,95 +156,96 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 12409;0x3079;WRITE_SYSCALL_ERROR_PDEC;HIGH;No description;linux/ipcore/PdecHandler.h
 12410;0x307a;PDEC_RESET_FAILED;HIGH;Failed to pull PDEC reset to low;linux/ipcore/PdecHandler.h
 12411;0x307b;OPEN_IRQ_FILE_FAILED;HIGH;Failed to open the IRQ uio file;linux/ipcore/PdecHandler.h
-12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrComHandler.h
+12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/acs/StrComHandler.h
-12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrComHandler.h
+12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/acs/StrComHandler.h
-12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrComHandler.h
+12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/acs/StrComHandler.h
-12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrComHandler.h
+12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/acs/StrComHandler.h
-12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrComHandler.h
+12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/acs/StrComHandler.h
-12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrComHandler.h
+12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/acs/StrComHandler.h
-12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrComHandler.h
+12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/acs/StrComHandler.h
-12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrComHandler.h
+12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/acs/StrComHandler.h
-12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrComHandler.h
+12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/acs/StrComHandler.h
-12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrComHandler.h
+12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/acs/StrComHandler.h
-12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrComHandler.h
+12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/acs/StrComHandler.h
-12511;0x30df;STR_COM_REPLY_TIMEOUT;LOW;Star tracker did not send a valid reply for a certain timeout. P1: Position of upload or download packet for which the packet wa sent. P2: Timeout;linux/devices/startracker/StrComHandler.h
+12511;0x30df;STR_COM_REPLY_TIMEOUT;LOW;Star tracker did not send a valid reply for a certain timeout. P1: Position of upload or download packet for which the packet wa sent. P2: Timeout;linux/acs/StrComHandler.h
-12513;0x30e1;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrComHandler.h
+12513;0x30e1;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/acs/StrComHandler.h
-12514;0x30e2;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrComHandler.h
+12514;0x30e2;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/acs/StrComHandler.h
-12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrComHandler.h
+12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/acs/StrComHandler.h
-12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/devices/startracker/StrComHandler.h
+12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/acs/StrComHandler.h
-12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/devices/startracker/StrComHandler.h
+12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/acs/StrComHandler.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/payload/PlocMpsocHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHelper.h
-12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
+12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocHelper.h
-12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
+12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocHelper.h
-12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
+12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/payload/PayloadPcduHandler.h
-12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/objects/AcsBoardAssembly.h
+12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
-12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/objects/AcsBoardAssembly.h
+12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
-12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/objects/AcsBoardAssembly.h
+12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/AcsBoardAssembly.h
-12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/objects/AcsBoardAssembly.h
+12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/AcsBoardAssembly.h
-12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/objects/SusAssembly.h
+12804;0x3204;DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY;MEDIUM;This is triggered when the assembly would have normally switched the board side, but the GPS device of the other side was marked faulty. P1: Current submode.;mission/system/acs/AcsBoardAssembly.h
-12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/objects/SusAssembly.h
+12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/SusAssembly.h
-12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/objects/SusAssembly.h
+12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/SusAssembly.h
-12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/objects/SusAssembly.h
+12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/SusAssembly.h
+12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/SusAssembly.h
 13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;No description;mission/system/objects/TcsBoardAssembly.h
-13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/devices/devicedefinitions/GPSDefinitions.h
+13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/acs/archive/GPSDefinitions.h
-13101;0x332d;CANT_GET_FIX;LOW;Could not get fix in maximum allowed time. P1: Maximum allowed time to get a fix after the GPS was switched on.;mission/devices/devicedefinitions/GPSDefinitions.h
+13101;0x332d;CANT_GET_FIX;LOW;Could not get fix in maximum allowed time. P1: Maximum allowed time to get a fix after the GPS was switched on.;mission/acs/archive/GPSDefinitions.h
-13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
+13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/power/P60DockHandler.h
-13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
+13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/power/P60DockHandler.h
-13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
+13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/power/P60DockHandler.h
-13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/devices/ploc/PlocSupvUartMan.h
+13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/payload/PlocSupvUartMan.h
-13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/devices/ploc/PlocSupvUartMan.h
+13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/payload/PlocSupvUartMan.h
-13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux/devices/ploc/PlocSupvUartMan.h
+13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux/payload/PlocSupvUartMan.h
-13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux/devices/ploc/PlocSupvUartMan.h
+13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux/payload/PlocSupvUartMan.h
-13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/devices/ploc/PlocSupvUartMan.h
+13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/payload/PlocSupvUartMan.h
-13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/devices/ploc/PlocSupvUartMan.h
+13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/payload/PlocSupvUartMan.h
-13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/devices/ploc/PlocSupvUartMan.h
+13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/payload/PlocSupvUartMan.h
-13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/devices/ploc/PlocSupvUartMan.h
+13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/payload/PlocSupvUartMan.h
-13608;0x3528;SUPV_MEM_CHECK_OK;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13608;0x3528;SUPV_MEM_CHECK_OK;INFO;No description;linux/payload/PlocSupvUartMan.h
-13609;0x3529;SUPV_MEM_CHECK_FAIL;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13609;0x3529;SUPV_MEM_CHECK_FAIL;INFO;No description;linux/payload/PlocSupvUartMan.h
-13616;0x3530;SUPV_SENDING_COMMAND_FAILED;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
+13616;0x3530;SUPV_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocSupvUartMan.h
-13617;0x3531;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13617;0x3531;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13618;0x3532;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13618;0x3532;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13619;0x3533;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocSupvUartMan.h
+13619;0x3533;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocSupvUartMan.h
-13620;0x3534;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13620;0x3534;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13621;0x3535;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13621;0x3535;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13622;0x3536;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/devices/ploc/PlocSupvUartMan.h
+13622;0x3536;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/payload/PlocSupvUartMan.h
-13623;0x3537;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13623;0x3537;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13624;0x3538;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13624;0x3538;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13625;0x3539;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/devices/ploc/PlocSupvUartMan.h
+13625;0x3539;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/payload/PlocSupvUartMan.h
-13626;0x353a;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/devices/ploc/PlocSupvUartMan.h
+13626;0x353a;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/payload/PlocSupvUartMan.h
-13627;0x353b;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/devices/ploc/PlocSupvUartMan.h
+13627;0x353b;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/payload/PlocSupvUartMan.h
-13628;0x353c;SUPV_REPLY_SIZE_MISSMATCH;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
+13628;0x353c;SUPV_REPLY_SIZE_MISSMATCH;LOW;No description;linux/payload/PlocSupvUartMan.h
-13629;0x353d;SUPV_REPLY_CRC_MISSMATCH;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
+13629;0x353d;SUPV_REPLY_CRC_MISSMATCH;LOW;No description;linux/payload/PlocSupvUartMan.h
-13630;0x353e;SUPV_UPDATE_PROGRESS;INFO;Will be triggered every 5 percent of the update progress. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/devices/ploc/PlocSupvUartMan.h
+13630;0x353e;SUPV_UPDATE_PROGRESS;INFO;Will be triggered every 5 percent of the update progress. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/payload/PlocSupvUartMan.h
-13631;0x353f;HDLC_FRAME_REMOVAL_ERROR;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13631;0x353f;HDLC_FRAME_REMOVAL_ERROR;INFO;No description;linux/payload/PlocSupvUartMan.h
-13632;0x3540;HDLC_CRC_ERROR;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13632;0x3540;HDLC_CRC_ERROR;INFO;No description;linux/payload/PlocSupvUartMan.h
-13701;0x3585;TX_ON;INFO;Transmitter is on now. P1: Submode, P2: Current default datarate.;mission/devices/devicedefinitions/SyrlinksDefinitions.h
+13701;0x3585;TX_ON;INFO;Transmitter is on now. P1: Submode, P2: Current default datarate.;mission/com/syrlinksDefs.h
-13702;0x3586;TX_OFF;INFO;Transmitter is off now.;mission/devices/devicedefinitions/SyrlinksDefinitions.h
+13702;0x3586;TX_OFF;INFO;Transmitter is off now.;mission/com/syrlinksDefs.h
-13800;0x35e8;MISSING_PACKET;LOW;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+13800;0x35e8;MISSING_PACKET;LOW;No description;mission/payload/scexHelpers.h
-13801;0x35e9;EXPERIMENT_TIMEDOUT;LOW;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+13801;0x35e9;EXPERIMENT_TIMEDOUT;LOW;No description;mission/payload/scexHelpers.h
-13802;0x35ea;MULTI_PACKET_COMMAND_DONE;INFO;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+13802;0x35ea;MULTI_PACKET_COMMAND_DONE;INFO;No description;mission/payload/scexHelpers.h
 13901;0x364d;SET_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13902;0x364e;GET_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13903;0x364f;INSERT_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
@@ -261,21 +261,25 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;bsp_q7s/core/CoreController.h
 14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;bsp_q7s/core/CoreController.h
 14010;0x36ba;I2C_UNAVAILABLE_REBOOT;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/ThermalController.h
+14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
-14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/ThermalController.h
+14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
-14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14103;0x3717;PLOC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14105;0x3719;CAMERA_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14105;0x3719;HPA_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14106;0x371a;PCDU_SYSTEM_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14106;0x371a;PLPCDU_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14107;0x371b;HEATER_NOT_OFF_FOR_OFF_MODE;MEDIUM;No description;mission/controller/tcsDefs.h
-14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/objects/ComSubsystem.h
+14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/com/ComSubsystem.h
-14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/objects/ComSubsystem.h
+14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/com/ComSubsystem.h
 14300;0x37dc;POSSIBLE_FILE_CORRUPTION;LOW;P1: Result code of TM packet parser. P2: Timestamp of possibly corrupt file as a unix timestamp.;mission/persistentTmStoreDefs.h
 14301;0x37dd;FILE_TOO_LARGE;LOW;File in store too large. P1: Detected file size P2: Allowed file size;mission/persistentTmStoreDefs.h
 14302;0x37de;BUSY_DUMPING_EVENT;INFO;No description;mission/persistentTmStoreDefs.h
-14303;0x37df;DUMP_WAS_CANCELLED;LOW;Dump was cancelled. P1: Object ID of store.;mission/persistentTmStoreDefs.h
 14305;0x37e1;DUMP_OK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14306;0x37e2;DUMP_NOK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14307;0x37e3;DUMP_MISC_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14308;0x37e4;DUMP_HK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14309;0x37e5;DUMP_CFDP_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14310;0x37e6;DUMP_OK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14311;0x37e7;DUMP_NOK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14312;0x37e8;DUMP_MISC_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14313;0x37e9;DUMP_HK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14314;0x37ea;DUMP_CFDP_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h

generators/bsp_hosted_objects.csv

@@ -30,6 +30,8 @@
 0x44120350;RW4
 0x44130001;STAR_TRACKER
 0x44130045;GPS_CONTROLLER
+0x44130046;GPS_0_HEALTH_DEV
+0x44130047;GPS_1_HEALTH_DEV
 0x44140013;IMTQ_POLLING
 0x44140014;IMTQ_HANDLER
 0x442000A1;PCDU_HANDLER

generators/bsp_hosted_returnvalues.csv

@@ -357,6 +357,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x3a02;MQI_Full;No space left for more messages;2;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
 0x3a03;MQI_NoReplyPartner;Returned if a reply method was called without partner;3;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
 0x3a04;MQI_DestinationInvalid;Returned if the target destination is invalid.;4;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
+0x3b00;SPH_ConnBroken;No description;0;SEMAPHORE_IF;fsfw/src/fsfw/osal/common/TcpTmTcServer.h
 0x3b01;SPH_SemaphoreTimeout;No description;1;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
 0x3b02;SPH_SemaphoreNotOwned;No description;2;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
 0x3b03;SPH_SemaphoreInvalid;No description;3;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
@@ -372,7 +373,6 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x3e05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
 0x3f01;DLEE_NoPacketFound;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
 0x3f02;DLEE_PossiblePacketLoss;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
-0x4100;PUS9_ConnBroken;No description;0;PUS_SERVICE_9;fsfw/src/fsfw/osal/common/TcpTmTcServer.h
 0x4201;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4202;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4203;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
@@ -417,54 +417,86 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x4807;HGIO_GpioGetValueFailed;No description;7;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
 0x4c00;SPPA_NoPacketFound;No description;0;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
 0x4c01;SPPA_SplitPacket;No description;1;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
-0x4fa0;HEATER_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa1;HEATER_CommandNotSupported;No description;161;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa1;HEATER_InvalidRampTime;Action Message with invalid ramp time was received.;161;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa2;HEATER_InitFailed;No description;162;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa2;HEATER_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa3;HEATER_InvalidSwitchNr;No description;163;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa3;HEATER_ExecutionFailed;Command execution failed;163;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa4;HEATER_MainSwitchSetTimeout;No description;164;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa4;HEATER_CrcError;Reaction wheel reply has invalid crc;164;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa5;HEATER_CommandAlreadyWaiting;No description;165;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa5;HEATER_ValueNotRead;No description;165;HEATER_HANDLER;mission/devices/RwHandler.h
+0x50a0;SYRLINKS_CrcFailure;No description;160;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a0;SYRLINKS_CrcFailure;No description;160;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a1;SYRLINKS_UartFraminOrParityErrorAck;No description;161;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a1;SYRLINKS_UartFraminOrParityErrorAck;No description;161;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a2;SYRLINKS_BadCharacterAck;No description;162;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a2;SYRLINKS_BadCharacterAck;No description;162;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a3;SYRLINKS_BadParameterValueAck;No description;163;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a3;SYRLINKS_BadParameterValueAck;No description;163;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a4;SYRLINKS_BadEndOfFrameAck;No description;164;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a4;SYRLINKS_BadEndOfFrameAck;No description;164;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a5;SYRLINKS_UnknownCommandIdAck;No description;165;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a5;SYRLINKS_UnknownCommandIdAck;No description;165;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a6;SYRLINKS_BadCrcAck;No description;166;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a6;SYRLINKS_BadCrcAck;No description;166;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a7;SYRLINKS_ReplyWrongSize;No description;167;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a7;SYRLINKS_ReplyWrongSize;No description;167;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a8;SYRLINKS_MissingStartFrameCharacter;No description;168;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a8;SYRLINKS_MissingStartFrameCharacter;No description;168;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x5100;IMTQ_InvalidCommandCode;No description;0;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5100;IMTQ_InvalidCommandCode;No description;0;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5101;IMTQ_MgmMeasurementLowLevelError;No description;1;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5101;IMTQ_MgmMeasurementLowLevelError;No description;1;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5102;IMTQ_ActuateCmdLowLevelError;No description;2;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5102;IMTQ_ActuateCmdLowLevelError;No description;2;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5103;IMTQ_ParameterMissing;No description;3;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5103;IMTQ_ParameterMissing;No description;3;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5104;IMTQ_ParameterInvalid;No description;4;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5104;IMTQ_ParameterInvalid;No description;4;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5105;IMTQ_CcUnavailable;No description;5;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5105;IMTQ_CcUnavailable;No description;5;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5106;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5106;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5107;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5107;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5108;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5108;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5109;IMTQ_StartupCfgError;No description;9;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x51a7;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;167;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x510a;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;10;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x52b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b3;RWHA_InvalidSubstitute;Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination;179;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b3;RWHA_InvalidSubstitute;Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination;179;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b4;RWHA_MissingEndSign;HDLC decoding mechanism never receives the end sign 0x7E;180;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b4;RWHA_MissingEndSign;HDLC decoding mechanism never receives the end sign 0x7E;180;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/acs/rwHelpers.h
-0x58a0;SUSS_ErrorUnlockMutex;No description;160;SUS_HANDLER;mission/devices/LegacySusHandler.h
+0x53a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;160;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x58a1;SUSS_ErrorLockMutex;No description;161;SUS_HANDLER;mission/devices/LegacySusHandler.h
+0x53a1;STRH_PingFailed;Ping command failed;161;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x5d00;GOMS_PacketTooLong;No description;0;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x53a2;STRH_VersionReqFailed;Status in version reply signals error;162;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x5d01;GOMS_InvalidTableId;No description;1;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x53a3;STRH_InterfaceReqFailed;Status in interface reply signals error;163;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x5d02;GOMS_InvalidAddress;No description;2;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x53a4;STRH_PowerReqFailed;Status in power reply signals error;164;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x53a5;STRH_SetParamFailed;Status of reply to parameter set command signals error;165;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x53a6;STRH_ActionFailed;Status of reply to action command signals error;166;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x53a7;STRH_FilePathTooLong;Received invalid path string. Exceeds allowed length;167;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x60a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/tmtc/CcsdsIpCoreHandler.h
+0x53a8;STRH_FilenameTooLong;Name of file received with command is too long;168;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a9;STRH_InvalidProgram;Received version reply with invalid program ID;169;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53aa;STRH_ReplyError;Status field reply signals error;170;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ab;STRH_CommandTooShort;Received command which is too short (some data is missing for proper execution);171;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ac;STRH_InvalidLength;Received command with invalid length (too few or too many parameters);172;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ad;STRH_RegionMismatch;Region mismatch between send and received data;173;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ae;STRH_AddressMismatch;Address mismatch between send and received data;174;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53af;STRH_LengthMismatch;Length field mismatch between send and received data;175;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b0;STRH_FileNotExists;Specified file does not exist;176;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b1;STRH_InvalidType;Download blob pixel command has invalid type field;177;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b2;STRH_InvalidId;Received FPGA action command with invalid ID;178;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b3;STRH_ReplyTooShort;Received reply is too short;179;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b4;STRH_CrcFailure;Received reply with invalid CRC;180;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b5;STRH_StrHelperExecuting;Star tracker handler currently executing a command and using the communication interface;181;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x58a0;SUSS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a1;SUSS_InvalidRampTime;Action Message with invalid ramp time was received.;161;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a2;SUSS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a3;SUSS_ExecutionFailed;Command execution failed;163;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a4;SUSS_CrcError;Reaction wheel reply has invalid crc;164;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a5;SUSS_ValueNotRead;No description;165;SUS_HANDLER;mission/acs/RwHandler.h
+0x5d00;GOMS_PacketTooLong;No description;0;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d01;GOMS_InvalidTableId;No description;1;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d02;GOMS_InvalidAddress;No description;2;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x60a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/com/CcsdsIpCoreHandler.h
+0x6201;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
+0x6202;JSONBASE_SetNotExists;Requested set does not exist in json file;2;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
+0x6203;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
 0x63a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
-0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
 0x6900;ACSCTRL_FileDeletionFailed;No description;0;ACS_CTRL;mission/controller/AcsController.h
 0x6a02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6a03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
@@ -474,11 +506,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x6a07;ACSMEKF_MekfNotFinite;No description;7;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6a08;ACSMEKF_MekfInitialized;No description;8;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6a09;ACSMEKF_MekfRunning;No description;9;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b02;ACSSAF_SafectrlNoMagFieldForControl;No description;2;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
+0x6b01;ACSSAF_SafectrlMekfInputInvalid;No description;1;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b03;ACSSAF_SafectrlUseMekf;No description;3;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b04;ACSSAF_SafectrlUseNonmekf;No description;4;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b05;ACSSAF_SafectrlUseDamping;No description;5;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b06;ACSSAF_SafectrlNoSensorsForControl;No description;6;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
 0x6c01;ACSPTG_PtgctrlMekfInputInvalid;No description;1;ACS_PTG;mission/controller/acs/control/PtgCtrl.h
 0x6d01;ACSDTB_DetumbleNoSensordata;No description;1;ACS_DETUMBLE;mission/controller/acs/control/Detumble.h
 0x7000;PTM_DumpDone;No description;0;PERSISTENT_TM_STORE;mission/tmtc/PersistentTmStore.h

generators/bsp_q7s_events.csv

@@ -86,66 +86,65 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 10802;0x2a32;SERIALIZATION_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10803;0x2a33;FILESTORE_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10804;0x2a34;FILENAME_TOO_LARGE_ERROR;LOW;P1: Transaction step ID, P2: 0 for source file name, 1 for dest file name;fsfw/src/fsfw/cfdp/handler/defs.h
-11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;The limits for the rotation in safe mode were violated.;mission/acsDefs.h
+11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;No description;mission/acs/defs.h
-11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;The system has recovered from a safe rate rotation violation.;mission/acsDefs.h
+11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;No description;mission/acs/defs.h
-11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;Multiple RWs are invalid, uncommandable and therefore higher ACS modes cannot be maintained.;mission/acsDefs.h
+11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;No description;mission/acs/defs.h
-11203;0x2bc3;MEKF_INVALID_INFO;INFO;MEKF was not able to compute a solution. P1: MEKF state on exit;mission/acsDefs.h
+11203;0x2bc3;MEKF_INVALID_INFO;INFO;No description;mission/acs/defs.h
-11204;0x2bc4;MEKF_RECOVERY;INFO;MEKF is able to compute a solution again.;mission/acsDefs.h
+11204;0x2bc4;MEKF_RECOVERY;INFO;No description;mission/acs/defs.h
-11205;0x2bc5;MEKF_AUTOMATIC_RESET;INFO;MEKF performed an automatic reset after detection of nonfinite values.;mission/acsDefs.h
+11205;0x2bc5;MEKF_INVALID_MODE_VIOLATION;HIGH;No description;mission/acs/defs.h
-11206;0x2bc6;MEKF_INVALID_MODE_VIOLATION;HIGH;MEKF was not able to compute a solution during any pointing ACS mode for a prolonged time.;mission/acsDefs.h
+11206;0x2bc6;SAFE_MODE_CONTROLLER_FAILURE;HIGH;No description;mission/acs/defs.h
-11207;0x2bc7;SAFE_MODE_CONTROLLER_FAILURE;HIGH;The ACS safe mode controller was not able to compute a solution and has failed. P1: Missing information about magnetic field, P2: Missing information about rotational rate;mission/acsDefs.h
+11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/power/defs.h
-11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/power/defs.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/power/defs.h
-11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/devices/devicedefinitions/powerDefinitions.h
+11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/power/defs.h
-11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/devices/devicedefinitions/powerDefinitions.h
+11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
-11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/devices/HeaterHandler.h
+11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
-11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/devices/HeaterHandler.h
+11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/tcs/HeaterHandler.h
-11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/devices/HeaterHandler.h
+11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/tcs/HeaterHandler.h
-11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/devices/HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;LOW;No description;mission/tcs/HeaterHandler.h
-11404;0x2c8c;SWITCH_ALREADY_ON;LOW;No description;mission/devices/HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;No description;mission/tcs/HeaterHandler.h
-11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;No description;mission/devices/HeaterHandler.h
+11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/tcs/HeaterHandler.h
-11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/devices/HeaterHandler.h
+11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/tcs/HeaterHandler.h
-11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/devices/HeaterHandler.h
+11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
-11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/devices/SolarArrayDeploymentHandler.h
+11501;0x2ced;BURN_PHASE_DONE;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
-11501;0x2ced;BURN_PHASE_DONE;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/devices/SolarArrayDeploymentHandler.h
+11502;0x2cee;MAIN_SWITCH_ON_TIMEOUT;LOW;No description;mission/SolarArrayDeploymentHandler.h
-11502;0x2cee;MAIN_SWITCH_ON_TIMEOUT;LOW;No description;mission/devices/SolarArrayDeploymentHandler.h
+11503;0x2cef;MAIN_SWITCH_OFF_TIMEOUT;LOW;No description;mission/SolarArrayDeploymentHandler.h
-11503;0x2cef;MAIN_SWITCH_OFF_TIMEOUT;LOW;No description;mission/devices/SolarArrayDeploymentHandler.h
+11504;0x2cf0;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11504;0x2cf0;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11505;0x2cf1;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11505;0x2cf1;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11506;0x2cf2;DEPL_SA1_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11506;0x2cf2;DEPL_SA1_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11507;0x2cf3;DEPL_SA2_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
-11507;0x2cf3;DEPL_SA2_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
+11508;0x2cf4;AUTONOMOUS_DEPLOYMENT_COMPLETED;INFO;No description;mission/SolarArrayDeploymentHandler.h
-11508;0x2cf4;AUTONOMOUS_DEPLOYMENT_COMPLETED;INFO;No description;mission/devices/SolarArrayDeploymentHandler.h
+11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/payload/PlocMpsocHandler.h
-11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
+11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/payload/PlocMpsocHandler.h
-11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
+11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/payload/PlocMpsocHandler.h
-11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
+11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/payload/PlocMpsocHandler.h
-11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
+11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/payload/PlocMpsocHandler.h
-11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
+11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
-11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
+11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/acs/ImtqHandler.h
-11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/ImtqHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/acs/rwHelpers.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/devicedefinitions/rwHelpers.h
+11802;0x2e1a;RESET_OCCURED;LOW;No description;mission/acs/rwHelpers.h
-11802;0x2e1a;RESET_OCCURED;LOW;No description;mission/devices/devicedefinitions/rwHelpers.h
+11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;mission/acs/str/StarTrackerHandler.h
-11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
+11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;mission/acs/str/StarTrackerHandler.h
-11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/payload/PlocSupervisorHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
+12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/payload/PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/devices/ploc/PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/payload/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/devices/ploc/PlocSupervisorHandler.h
+12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/payload/PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
+12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/payload/PlocSupervisorHandler.h
-12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/devices/ploc/PlocSupervisorHandler.h
+12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/payload/PlocSupervisorHandler.h
-12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
+12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/payload/PlocSupervisorHandler.h
-12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/devices/ploc/PlocSupervisorHandler.h
+12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/payload/PlocSupervisorHandler.h
-12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/devices/ploc/PlocSupervisorHandler.h
 12100;0x2f44;SANITIZATION_FAILED;LOW;No description;bsp_q7s/fs/SdCardManager.h
 12101;0x2f45;MOUNTED_SD_CARD;INFO;No description;bsp_q7s/fs/SdCardManager.h
-12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
+12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/payload/PlocMemoryDumper.h
-12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
+12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/payload/PlocMemoryDumper.h
-12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
+12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/payload/PlocMemoryDumper.h
 12401;0x3071;INVALID_TC_FRAME;HIGH;No description;linux/ipcore/PdecHandler.h
 12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/ipcore/PdecHandler.h
 12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/ipcore/PdecHandler.h
@@ -157,95 +156,96 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 12409;0x3079;WRITE_SYSCALL_ERROR_PDEC;HIGH;No description;linux/ipcore/PdecHandler.h
 12410;0x307a;PDEC_RESET_FAILED;HIGH;Failed to pull PDEC reset to low;linux/ipcore/PdecHandler.h
 12411;0x307b;OPEN_IRQ_FILE_FAILED;HIGH;Failed to open the IRQ uio file;linux/ipcore/PdecHandler.h
-12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrComHandler.h
+12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/acs/StrComHandler.h
-12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrComHandler.h
+12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/acs/StrComHandler.h
-12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrComHandler.h
+12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/acs/StrComHandler.h
-12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrComHandler.h
+12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/acs/StrComHandler.h
-12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrComHandler.h
+12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/acs/StrComHandler.h
-12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrComHandler.h
+12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/acs/StrComHandler.h
-12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrComHandler.h
+12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/acs/StrComHandler.h
-12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrComHandler.h
+12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/acs/StrComHandler.h
-12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrComHandler.h
+12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/acs/StrComHandler.h
-12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrComHandler.h
+12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/acs/StrComHandler.h
-12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrComHandler.h
+12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/acs/StrComHandler.h
-12511;0x30df;STR_COM_REPLY_TIMEOUT;LOW;Star tracker did not send a valid reply for a certain timeout. P1: Position of upload or download packet for which the packet wa sent. P2: Timeout;linux/devices/startracker/StrComHandler.h
+12511;0x30df;STR_COM_REPLY_TIMEOUT;LOW;Star tracker did not send a valid reply for a certain timeout. P1: Position of upload or download packet for which the packet wa sent. P2: Timeout;linux/acs/StrComHandler.h
-12513;0x30e1;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrComHandler.h
+12513;0x30e1;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/acs/StrComHandler.h
-12514;0x30e2;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrComHandler.h
+12514;0x30e2;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/acs/StrComHandler.h
-12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrComHandler.h
+12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/acs/StrComHandler.h
-12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/devices/startracker/StrComHandler.h
+12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/acs/StrComHandler.h
-12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/devices/startracker/StrComHandler.h
+12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/acs/StrComHandler.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/payload/PlocMpsocHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHelper.h
-12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
+12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocHelper.h
-12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
+12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocHelper.h
-12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
+12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/payload/PayloadPcduHandler.h
-12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
-12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/objects/AcsBoardAssembly.h
+12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
-12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/objects/AcsBoardAssembly.h
+12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
-12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/objects/AcsBoardAssembly.h
+12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/AcsBoardAssembly.h
-12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/objects/AcsBoardAssembly.h
+12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/AcsBoardAssembly.h
-12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/objects/SusAssembly.h
+12804;0x3204;DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY;MEDIUM;This is triggered when the assembly would have normally switched the board side, but the GPS device of the other side was marked faulty. P1: Current submode.;mission/system/acs/AcsBoardAssembly.h
-12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/objects/SusAssembly.h
+12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/SusAssembly.h
-12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/objects/SusAssembly.h
+12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/SusAssembly.h
-12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/objects/SusAssembly.h
+12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/SusAssembly.h
+12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/SusAssembly.h
 13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;No description;mission/system/objects/TcsBoardAssembly.h
-13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/devices/devicedefinitions/GPSDefinitions.h
+13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/acs/archive/GPSDefinitions.h
-13101;0x332d;CANT_GET_FIX;LOW;Could not get fix in maximum allowed time. P1: Maximum allowed time to get a fix after the GPS was switched on.;mission/devices/devicedefinitions/GPSDefinitions.h
+13101;0x332d;CANT_GET_FIX;LOW;Could not get fix in maximum allowed time. P1: Maximum allowed time to get a fix after the GPS was switched on.;mission/acs/archive/GPSDefinitions.h
-13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
+13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/power/P60DockHandler.h
-13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
+13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/power/P60DockHandler.h
-13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
+13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/power/P60DockHandler.h
-13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/devices/ploc/PlocSupvUartMan.h
+13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/payload/PlocSupvUartMan.h
-13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/devices/ploc/PlocSupvUartMan.h
+13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/payload/PlocSupvUartMan.h
-13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux/devices/ploc/PlocSupvUartMan.h
+13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux/payload/PlocSupvUartMan.h
-13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux/devices/ploc/PlocSupvUartMan.h
+13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux/payload/PlocSupvUartMan.h
-13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/devices/ploc/PlocSupvUartMan.h
+13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/payload/PlocSupvUartMan.h
-13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/devices/ploc/PlocSupvUartMan.h
+13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/payload/PlocSupvUartMan.h
-13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/devices/ploc/PlocSupvUartMan.h
+13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/payload/PlocSupvUartMan.h
-13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/devices/ploc/PlocSupvUartMan.h
+13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/payload/PlocSupvUartMan.h
-13608;0x3528;SUPV_MEM_CHECK_OK;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13608;0x3528;SUPV_MEM_CHECK_OK;INFO;No description;linux/payload/PlocSupvUartMan.h
-13609;0x3529;SUPV_MEM_CHECK_FAIL;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13609;0x3529;SUPV_MEM_CHECK_FAIL;INFO;No description;linux/payload/PlocSupvUartMan.h
-13616;0x3530;SUPV_SENDING_COMMAND_FAILED;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
+13616;0x3530;SUPV_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocSupvUartMan.h
-13617;0x3531;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13617;0x3531;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13618;0x3532;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13618;0x3532;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13619;0x3533;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocSupvUartMan.h
+13619;0x3533;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocSupvUartMan.h
-13620;0x3534;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13620;0x3534;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13621;0x3535;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13621;0x3535;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13622;0x3536;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/devices/ploc/PlocSupvUartMan.h
+13622;0x3536;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/payload/PlocSupvUartMan.h
-13623;0x3537;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13623;0x3537;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13624;0x3538;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
+13624;0x3538;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
-13625;0x3539;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/devices/ploc/PlocSupvUartMan.h
+13625;0x3539;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/payload/PlocSupvUartMan.h
-13626;0x353a;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/devices/ploc/PlocSupvUartMan.h
+13626;0x353a;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/payload/PlocSupvUartMan.h
-13627;0x353b;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/devices/ploc/PlocSupvUartMan.h
+13627;0x353b;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/payload/PlocSupvUartMan.h
-13628;0x353c;SUPV_REPLY_SIZE_MISSMATCH;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
+13628;0x353c;SUPV_REPLY_SIZE_MISSMATCH;LOW;No description;linux/payload/PlocSupvUartMan.h
-13629;0x353d;SUPV_REPLY_CRC_MISSMATCH;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
+13629;0x353d;SUPV_REPLY_CRC_MISSMATCH;LOW;No description;linux/payload/PlocSupvUartMan.h
-13630;0x353e;SUPV_UPDATE_PROGRESS;INFO;Will be triggered every 5 percent of the update progress. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/devices/ploc/PlocSupvUartMan.h
+13630;0x353e;SUPV_UPDATE_PROGRESS;INFO;Will be triggered every 5 percent of the update progress. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/payload/PlocSupvUartMan.h
-13631;0x353f;HDLC_FRAME_REMOVAL_ERROR;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13631;0x353f;HDLC_FRAME_REMOVAL_ERROR;INFO;No description;linux/payload/PlocSupvUartMan.h
-13632;0x3540;HDLC_CRC_ERROR;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
+13632;0x3540;HDLC_CRC_ERROR;INFO;No description;linux/payload/PlocSupvUartMan.h
-13701;0x3585;TX_ON;INFO;Transmitter is on now. P1: Submode, P2: Current default datarate.;mission/devices/devicedefinitions/SyrlinksDefinitions.h
+13701;0x3585;TX_ON;INFO;Transmitter is on now. P1: Submode, P2: Current default datarate.;mission/com/syrlinksDefs.h
-13702;0x3586;TX_OFF;INFO;Transmitter is off now.;mission/devices/devicedefinitions/SyrlinksDefinitions.h
+13702;0x3586;TX_OFF;INFO;Transmitter is off now.;mission/com/syrlinksDefs.h
-13800;0x35e8;MISSING_PACKET;LOW;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+13800;0x35e8;MISSING_PACKET;LOW;No description;mission/payload/scexHelpers.h
-13801;0x35e9;EXPERIMENT_TIMEDOUT;LOW;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+13801;0x35e9;EXPERIMENT_TIMEDOUT;LOW;No description;mission/payload/scexHelpers.h
-13802;0x35ea;MULTI_PACKET_COMMAND_DONE;INFO;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+13802;0x35ea;MULTI_PACKET_COMMAND_DONE;INFO;No description;mission/payload/scexHelpers.h
 13901;0x364d;SET_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13902;0x364e;GET_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13903;0x364f;INSERT_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
@@ -261,21 +261,25 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;bsp_q7s/core/CoreController.h
 14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;bsp_q7s/core/CoreController.h
 14010;0x36ba;I2C_UNAVAILABLE_REBOOT;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/ThermalController.h
+14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
-14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/ThermalController.h
+14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
-14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14103;0x3717;PLOC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14105;0x3719;CAMERA_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14105;0x3719;HPA_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14106;0x371a;PCDU_SYSTEM_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
-14106;0x371a;PLPCDU_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14107;0x371b;HEATER_NOT_OFF_FOR_OFF_MODE;MEDIUM;No description;mission/controller/tcsDefs.h
-14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/objects/ComSubsystem.h
+14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/com/ComSubsystem.h
-14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/objects/ComSubsystem.h
+14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/com/ComSubsystem.h
 14300;0x37dc;POSSIBLE_FILE_CORRUPTION;LOW;P1: Result code of TM packet parser. P2: Timestamp of possibly corrupt file as a unix timestamp.;mission/persistentTmStoreDefs.h
 14301;0x37dd;FILE_TOO_LARGE;LOW;File in store too large. P1: Detected file size P2: Allowed file size;mission/persistentTmStoreDefs.h
 14302;0x37de;BUSY_DUMPING_EVENT;INFO;No description;mission/persistentTmStoreDefs.h
-14303;0x37df;DUMP_WAS_CANCELLED;LOW;Dump was cancelled. P1: Object ID of store.;mission/persistentTmStoreDefs.h
 14305;0x37e1;DUMP_OK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14306;0x37e2;DUMP_NOK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14307;0x37e3;DUMP_MISC_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14308;0x37e4;DUMP_HK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14309;0x37e5;DUMP_CFDP_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14310;0x37e6;DUMP_OK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14311;0x37e7;DUMP_NOK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14312;0x37e8;DUMP_MISC_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14313;0x37e9;DUMP_HK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14314;0x37ea;DUMP_CFDP_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h

generators/bsp_q7s_objects.csv

@@ -29,6 +29,8 @@
 0x44120350;RW4
 0x44130001;STAR_TRACKER
 0x44130045;GPS_CONTROLLER
+0x44130046;GPS_0_HEALTH_DEV
+0x44130047;GPS_1_HEALTH_DEV
 0x44140013;IMTQ_POLLING
 0x44140014;IMTQ_HANDLER
 0x442000A1;PCDU_HANDLER

generators/bsp_q7s_returnvalues.csv

@@ -357,6 +357,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x3a02;MQI_Full;No space left for more messages;2;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
 0x3a03;MQI_NoReplyPartner;Returned if a reply method was called without partner;3;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
 0x3a04;MQI_DestinationInvalid;Returned if the target destination is invalid.;4;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
+0x3b00;SPH_ConnBroken;No description;0;SEMAPHORE_IF;fsfw/src/fsfw/osal/common/TcpTmTcServer.h
 0x3b01;SPH_SemaphoreTimeout;No description;1;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
 0x3b02;SPH_SemaphoreNotOwned;No description;2;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
 0x3b03;SPH_SemaphoreInvalid;No description;3;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
@@ -372,7 +373,6 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x3e05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
 0x3f01;DLEE_NoPacketFound;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
 0x3f02;DLEE_PossiblePacketLoss;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
-0x4100;PUS9_ConnBroken;No description;0;PUS_SERVICE_9;fsfw/src/fsfw/osal/common/TcpTmTcServer.h
 0x4201;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4202;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4203;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
@@ -417,102 +417,105 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x4807;HGIO_GpioGetValueFailed;No description;7;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
 0x4c00;SPPA_NoPacketFound;No description;0;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
 0x4c01;SPPA_SplitPacket;No description;1;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
-0x4fa0;HEATER_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa1;HEATER_CommandNotSupported;No description;161;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa1;HEATER_InvalidRampTime;Action Message with invalid ramp time was received.;161;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa2;HEATER_InitFailed;No description;162;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa2;HEATER_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa3;HEATER_InvalidSwitchNr;No description;163;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa3;HEATER_ExecutionFailed;Command execution failed;163;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa4;HEATER_MainSwitchSetTimeout;No description;164;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa4;HEATER_CrcError;Reaction wheel reply has invalid crc;164;HEATER_HANDLER;mission/devices/RwHandler.h
+0x4fa5;HEATER_CommandAlreadyWaiting;No description;165;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x4fa5;HEATER_ValueNotRead;No description;165;HEATER_HANDLER;mission/devices/RwHandler.h
+0x50a0;SYRLINKS_CrcFailure;No description;160;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a0;SYRLINKS_CrcFailure;No description;160;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a1;SYRLINKS_UartFraminOrParityErrorAck;No description;161;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a1;SYRLINKS_UartFraminOrParityErrorAck;No description;161;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a2;SYRLINKS_BadCharacterAck;No description;162;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a2;SYRLINKS_BadCharacterAck;No description;162;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a3;SYRLINKS_BadParameterValueAck;No description;163;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a3;SYRLINKS_BadParameterValueAck;No description;163;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a4;SYRLINKS_BadEndOfFrameAck;No description;164;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a4;SYRLINKS_BadEndOfFrameAck;No description;164;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a5;SYRLINKS_UnknownCommandIdAck;No description;165;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a5;SYRLINKS_UnknownCommandIdAck;No description;165;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a6;SYRLINKS_BadCrcAck;No description;166;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a6;SYRLINKS_BadCrcAck;No description;166;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a7;SYRLINKS_ReplyWrongSize;No description;167;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a7;SYRLINKS_ReplyWrongSize;No description;167;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x50a8;SYRLINKS_MissingStartFrameCharacter;No description;168;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x50a8;SYRLINKS_MissingStartFrameCharacter;No description;168;SYRLINKS_HANDLER;mission/devices/SyrlinksHandler.h
+0x5100;IMTQ_InvalidCommandCode;No description;0;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5100;IMTQ_InvalidCommandCode;No description;0;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5101;IMTQ_MgmMeasurementLowLevelError;No description;1;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5101;IMTQ_MgmMeasurementLowLevelError;No description;1;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5102;IMTQ_ActuateCmdLowLevelError;No description;2;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5102;IMTQ_ActuateCmdLowLevelError;No description;2;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5103;IMTQ_ParameterMissing;No description;3;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5103;IMTQ_ParameterMissing;No description;3;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5104;IMTQ_ParameterInvalid;No description;4;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5104;IMTQ_ParameterInvalid;No description;4;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5105;IMTQ_CcUnavailable;No description;5;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5105;IMTQ_CcUnavailable;No description;5;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5106;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5106;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5107;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5107;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5108;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5108;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x5109;IMTQ_StartupCfgError;No description;9;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x51a7;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;167;IMTQ_HANDLER;mission/devices/devicedefinitions/imtqHelpers.h
+0x510a;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;10;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x52b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b3;RWHA_InvalidSubstitute;Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination;179;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b3;RWHA_InvalidSubstitute;Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination;179;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b4;RWHA_MissingEndSign;HDLC decoding mechanism never receives the end sign 0x7E;180;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b4;RWHA_MissingEndSign;HDLC decoding mechanism never receives the end sign 0x7E;180;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/acs/rwHelpers.h
-0x52b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
+0x52b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/acs/rwHelpers.h
-0x53a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;160;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;160;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a1;STRH_PingFailed;Ping command failed;161;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a1;STRH_PingFailed;Ping command failed;161;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a2;STRH_VersionReqFailed;Status in version reply signals error;162;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a2;STRH_VersionReqFailed;Status in version reply signals error;162;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a3;STRH_InterfaceReqFailed;Status in interface reply signals error;163;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a3;STRH_InterfaceReqFailed;Status in interface reply signals error;163;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a4;STRH_PowerReqFailed;Status in power reply signals error;164;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a4;STRH_PowerReqFailed;Status in power reply signals error;164;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a5;STRH_SetParamFailed;Status of reply to parameter set command signals error;165;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a5;STRH_SetParamFailed;Status of reply to parameter set command signals error;165;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a6;STRH_ActionFailed;Status of reply to action command signals error;166;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a6;STRH_ActionFailed;Status of reply to action command signals error;166;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a7;STRH_FilePathTooLong;Received invalid path string. Exceeds allowed length;167;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a7;STRH_FilePathTooLong;Received invalid path string. Exceeds allowed length;167;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a8;STRH_FilenameTooLong;Name of file received with command is too long;168;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a8;STRH_FilenameTooLong;Name of file received with command is too long;168;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53a9;STRH_InvalidProgram;Received version reply with invalid program ID;169;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53a9;STRH_InvalidProgram;Received version reply with invalid program ID;169;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53aa;STRH_ReplyError;Status field reply signals error;170;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53aa;STRH_ReplyError;Status field reply signals error;170;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53ab;STRH_CommandTooShort;Received command which is too short (some data is missing for proper execution);171;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53ab;STRH_CommandTooShort;Received command which is too short (some data is missing for proper execution);171;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53ac;STRH_InvalidLength;Received command with invalid length (too few or too many parameters);172;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53ac;STRH_InvalidLength;Received command with invalid length (too few or too many parameters);172;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53ad;STRH_RegionMismatch;Region mismatch between send and received data;173;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53ad;STRH_RegionMismatch;Region mismatch between send and received data;173;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53ae;STRH_AddressMismatch;Address mismatch between send and received data;174;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53ae;STRH_AddressMismatch;Address mismatch between send and received data;174;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53af;STRH_LengthMismatch;Length field mismatch between send and received data;175;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53af;STRH_LengthMismatch;Length field mismatch between send and received data;175;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b0;STRH_FileNotExists;Specified file does not exist;176;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b0;STRH_FileNotExists;Specified file does not exist;176;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b1;STRH_InvalidType;Download blob pixel command has invalid type field;177;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b1;STRH_InvalidType;Download blob pixel command has invalid type field;177;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b2;STRH_InvalidId;Received FPGA action command with invalid ID;178;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b2;STRH_InvalidId;Received FPGA action command with invalid ID;178;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b3;STRH_ReplyTooShort;Received reply is too short;179;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b3;STRH_ReplyTooShort;Received reply is too short;179;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b4;STRH_CrcFailure;Received reply with invalid CRC;180;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b4;STRH_CrcFailure;Received reply with invalid CRC;180;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b5;STRH_StrHelperExecuting;Star tracker handler currently executing a command and using the communication interface;181;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b5;STRH_StrHelperExecuting;Star tracker handler currently executing a command and using the communication interface;181;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x53b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
+0x53b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/devices/devicedefinitions/PlocMPSoCDefinitions.h
+0x54e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/payload/plocMpscoDefs.h
-0x54e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/devices/devicedefinitions/PlocMPSoCDefinitions.h
+0x54e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/payload/plocMpscoDefs.h
-0x5700;PLSPVhLP_RequestDone;No description;0;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x5700;PLSPVhLP_RequestDone;No description;0;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5701;PLSPVhLP_NoPacketFound;No description;1;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x5701;PLSPVhLP_NoPacketFound;No description;1;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5702;PLSPVhLP_DecodeBufTooSmall;No description;2;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x5702;PLSPVhLP_DecodeBufTooSmall;No description;2;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5703;PLSPVhLP_PossiblePacketLossConsecutiveStart;No description;3;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x5703;PLSPVhLP_PossiblePacketLossConsecutiveStart;No description;3;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5704;PLSPVhLP_PossiblePacketLossConsecutiveEnd;No description;4;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x5704;PLSPVhLP_PossiblePacketLossConsecutiveEnd;No description;4;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5705;PLSPVhLP_HdlcError;No description;5;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x5705;PLSPVhLP_HdlcError;No description;5;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x57a0;PLSPVhLP_FileClosedAccidentally;File accidentally close;160;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x57a0;PLSPVhLP_FileClosedAccidentally;File accidentally close;160;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x57a1;PLSPVhLP_ProcessTerminated;Process has been terminated by command;161;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x57a1;PLSPVhLP_ProcessTerminated;Process has been terminated by command;161;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x57a2;PLSPVhLP_PathNotExists;Received command with invalid pathname;162;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x57a2;PLSPVhLP_PathNotExists;Received command with invalid pathname;162;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x57a3;PLSPVhLP_EventBufferReplyInvalidApid;Expected event buffer TM but received space packet with other APID;163;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
+0x57a3;PLSPVhLP_EventBufferReplyInvalidApid;Expected event buffer TM but received space packet with other APID;163;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x58a0;SUSS_ErrorUnlockMutex;No description;160;SUS_HANDLER;mission/devices/LegacySusHandler.h
+0x58a0;SUSS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SUS_HANDLER;mission/acs/RwHandler.h
-0x58a1;SUSS_ErrorLockMutex;No description;161;SUS_HANDLER;mission/devices/LegacySusHandler.h
+0x58a1;SUSS_InvalidRampTime;Action Message with invalid ramp time was received.;161;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a2;SUSS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a3;SUSS_ExecutionFailed;Command execution failed;163;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a4;SUSS_CrcError;Reaction wheel reply has invalid crc;164;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a5;SUSS_ValueNotRead;No description;165;SUS_HANDLER;mission/acs/RwHandler.h
+0x5900;IPCI_NoReplyAvailable;No description;0;CCSDS_IP_CORE_BRIDGE;linux/acs/ImtqPollingTask.h
+0x5901;IPCI_NoPacketFound;No description;1;CCSDS_IP_CORE_BRIDGE;linux/com/SyrlinksComHandler.h
 0x59a0;IPCI_PapbBusy;No description;160;CCSDS_IP_CORE_BRIDGE;linux/ipcore/PapbVcInterface.h
 0x5aa0;PTME_UnknownVcId;No description;160;PTME;linux/ipcore/Ptme.h
-0x5c01;STRHLP_SdNotMounted;SD card specified in path string not mounted;1;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c01;STRHLP_SdNotMounted;SD card specified in path string not mounted;1;STR_HELPER;linux/acs/StrComHandler.h
-0x5c02;STRHLP_FileNotExists;Specified file does not exist on filesystem;2;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c02;STRHLP_FileNotExists;Specified file does not exist on filesystem;2;STR_HELPER;linux/acs/StrComHandler.h
-0x5c03;STRHLP_PathNotExists;Specified path does not exist;3;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c03;STRHLP_PathNotExists;Specified path does not exist;3;STR_HELPER;linux/acs/StrComHandler.h
-0x5c04;STRHLP_FileCreationFailed;Failed to create download image or read flash file;4;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c04;STRHLP_FileCreationFailed;Failed to create download image or read flash file;4;STR_HELPER;linux/acs/StrComHandler.h
-0x5c05;STRHLP_RegionMismatch;Region in flash write/read reply does not match expected region;5;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c05;STRHLP_RegionMismatch;Region in flash write/read reply does not match expected region;5;STR_HELPER;linux/acs/StrComHandler.h
-0x5c06;STRHLP_AddressMismatch;Address in flash write/read reply does not match expected address;6;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c06;STRHLP_AddressMismatch;Address in flash write/read reply does not match expected address;6;STR_HELPER;linux/acs/StrComHandler.h
-0x5c07;STRHLP_LengthMismatch;Length in flash write/read reply does not match expected length;7;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c07;STRHLP_LengthMismatch;Length in flash write/read reply does not match expected length;7;STR_HELPER;linux/acs/StrComHandler.h
-0x5c08;STRHLP_StatusError;Status field in reply signals error;8;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c08;STRHLP_StatusError;Status field in reply signals error;8;STR_HELPER;linux/acs/StrComHandler.h
-0x5c09;STRHLP_InvalidTypeId;Reply has invalid type ID (should be of action reply type);9;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c09;STRHLP_InvalidTypeId;Reply has invalid type ID (should be of action reply type);9;STR_HELPER;linux/acs/StrComHandler.h
-0x5c0a;STRHLP_ReceptionTimeout;No description;10;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c0a;STRHLP_ReceptionTimeout;No description;10;STR_HELPER;linux/acs/StrComHandler.h
-0x5c0b;STRHLP_DecodingError;No description;11;STR_HELPER;linux/devices/startracker/StrComHandler.h
+0x5c0b;STRHLP_DecodingError;No description;11;STR_HELPER;linux/acs/StrComHandler.h
-0x5d00;GOMS_PacketTooLong;No description;0;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x5d00;GOMS_PacketTooLong;No description;0;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5d01;GOMS_InvalidTableId;No description;1;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x5d01;GOMS_InvalidTableId;No description;1;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5d02;GOMS_InvalidAddress;No description;2;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x5d02;GOMS_InvalidAddress;No description;2;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
+0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5e00;PLMEMDUMP_NoReplyAvailable;No description;0;PLOC_MEMORY_DUMPER;linux/devices/ImtqPollingTask.h
+0x5ea0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;160;PLOC_MEMORY_DUMPER;linux/payload/PlocMemoryDumper.h
-0x5e01;PLMEMDUMP_NoPacketFound;No description;1;PLOC_MEMORY_DUMPER;linux/devices/SyrlinksComHandler.h
+0x5ea1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;161;PLOC_MEMORY_DUMPER;linux/payload/PlocMemoryDumper.h
-0x5e02;PLMEMDUMP_InvalidCrc;No description;2;PLOC_MEMORY_DUMPER;linux/devices/ScexHelper.h
-0x5ea0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;160;PLOC_MEMORY_DUMPER;linux/devices/ploc/PlocMemoryDumper.h
-0x5ea1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;161;PLOC_MEMORY_DUMPER;linux/devices/ploc/PlocMemoryDumper.h
 0x5fa0;PDEC_AbandonedCltuRetval;No description;160;PDEC_HANDLER;linux/ipcore/PdecHandler.h
 0x5fa1;PDEC_FrameDirtyRetval;No description;161;PDEC_HANDLER;linux/ipcore/PdecHandler.h
 0x5fa2;PDEC_FrameIllegalMultipleReasons;No description;162;PDEC_HANDLER;linux/ipcore/PdecHandler.h
@@ -528,57 +531,58 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x5fac;PDEC_NsNotZeroRetval;No description;172;PDEC_HANDLER;linux/ipcore/PdecHandler.h
 0x5fae;PDEC_InvalidBcCc;No description;174;PDEC_HANDLER;linux/ipcore/PdecHandler.h
 0x5fb0;PDEC_CommandNotImplemented;Received action message with unknown action id;176;PDEC_HANDLER;linux/ipcore/PdecHandler.h
-0x60a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/tmtc/CcsdsIpCoreHandler.h
+0x60a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/com/CcsdsIpCoreHandler.h
 0x61a0;RS_RateNotSupported;The commanded rate is not supported by the current FPGA design;160;RATE_SETTER;linux/ipcore/PtmeConfig.h
 0x61a1;RS_BadBitRate;Bad bitrate has been commanded (e.g. 0);161;RATE_SETTER;linux/ipcore/PtmeConfig.h
 0x61a2;RS_ClkInversionFailed;Failed to invert clock and thus change the time the data is updated with respect to the tx clock;162;RATE_SETTER;linux/ipcore/PtmeConfig.h
 0x61a3;RS_TxManipulatorConfigFailed;Failed to change configuration bit of tx clock manipulator;163;RATE_SETTER;linux/ipcore/PtmeConfig.h
-0x6201;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;ARCSEC_JSON_BASE;linux/devices/startracker/ArcsecJsonParamBase.h
+0x6201;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
-0x6202;JSONBASE_SetNotExists;Requested set does not exist in json file;2;ARCSEC_JSON_BASE;linux/devices/startracker/ArcsecJsonParamBase.h
+0x6202;JSONBASE_SetNotExists;Requested set does not exist in json file;2;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
-0x6203;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;ARCSEC_JSON_BASE;linux/devices/startracker/ArcsecJsonParamBase.h
+0x6203;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
 0x63a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
 0x64a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;160;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
 0x64a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;161;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
-0x65a0;PLMPHLP_FileClosedAccidentally;File accidentally close;160;PLOC_MPSOC_HELPER;linux/devices/ploc/PlocMPSoCHelper.h
+0x6502;PLMPHLP_InvalidCrc;No description;2;PLOC_MPSOC_HELPER;linux/payload/ScexHelper.h
-0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x65a0;PLMPHLP_FileClosedAccidentally;File accidentally close;160;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocHelper.h
-0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
+0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x67a0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;160;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x67a1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;161;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;160;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;162;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;161;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a3;MPSOCRTVIF_InvalidApid;Received space packet with invalid APID from PLOC;163;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;162;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a4;MPSOCRTVIF_InvalidLength;Received command with invalid length;164;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a3;MPSOCRTVIF_InvalidApid;Received space packet with invalid APID from PLOC;163;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a5;MPSOCRTVIF_FilenameTooLong;Filename of file in OBC filesystem is too long;165;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a4;MPSOCRTVIF_InvalidLength;Received command with invalid length;164;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a6;MPSOCRTVIF_MpsocHelperExecuting;MPSoC helper is currently executing a command;166;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a5;MPSOCRTVIF_FilenameTooLong;Filename of file in OBC filesystem is too long;165;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a7;MPSOCRTVIF_MpsocFilenameTooLong;Filename of MPSoC file is to long (max. 256 bytes);167;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a6;MPSOCRTVIF_MpsocHelperExecuting;MPSoC helper is currently executing a command;166;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a8;MPSOCRTVIF_InvalidParameter;Command has invalid parameter;168;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a7;MPSOCRTVIF_MpsocFilenameTooLong;Filename of MPSoC file is to long (max. 256 bytes);167;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x67a9;MPSOCRTVIF_NameTooLong;Received command has file string with invalid length;169;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
+0x67a8;MPSOCRTVIF_InvalidParameter;Command has invalid parameter;168;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a0;SPVRTVIF_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;160;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x67a9;MPSOCRTVIF_NameTooLong;Received command has file string with invalid length;169;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a1;SPVRTVIF_InvalidServiceId;No description;161;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a0;SPVRTVIF_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;160;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a2;SPVRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;162;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a1;SPVRTVIF_InvalidServiceId;No description;161;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a3;SPVRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;163;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a2;SPVRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;162;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a4;SPVRTVIF_InvalidApid;Received space packet with invalid APID from PLOC supervisor;164;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a3;SPVRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;163;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a5;SPVRTVIF_GetTimeFailure;Failed to read current system time;165;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a4;SPVRTVIF_InvalidApid;Received space packet with invalid APID from PLOC supervisor;164;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a6;SPVRTVIF_InvalidWatchdog;Received command with invalid watchdog parameter. Valid watchdogs are 0 for PS, 1 for PL and 2 for INT;166;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a5;SPVRTVIF_GetTimeFailure;Failed to read current system time;165;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a7;SPVRTVIF_InvalidWatchdogTimeout;Received watchdog timeout config command with invalid timeout. Valid timeouts must be in the range between 1000 and 360000 ms.;167;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a6;SPVRTVIF_InvalidWatchdog;Received command with invalid watchdog parameter. Valid watchdogs are 0 for PS, 1 for PL and 2 for INT;166;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a8;SPVRTVIF_InvalidLatchupId;Received latchup config command with invalid latchup ID;168;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a7;SPVRTVIF_InvalidWatchdogTimeout;Received watchdog timeout config command with invalid timeout. Valid timeouts must be in the range between 1000 and 360000 ms.;167;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68a9;SPVRTVIF_SweepPeriodTooSmall;Received set adc sweep period command with invalid sweep period. Must be larger than 21.;169;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a8;SPVRTVIF_InvalidLatchupId;Received latchup config command with invalid latchup ID;168;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68aa;SPVRTVIF_InvalidTestParam;Receive auto EM test command with invalid test param. Valid params are 1 and 2.;170;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68a9;SPVRTVIF_SweepPeriodTooSmall;Received set adc sweep period command with invalid sweep period. Must be larger than 21.;169;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68ab;SPVRTVIF_MramPacketParsingFailure;Returned when scanning for MRAM dump packets failed.;171;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68aa;SPVRTVIF_InvalidTestParam;Receive auto EM test command with invalid test param. Valid params are 1 and 2.;170;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68ac;SPVRTVIF_InvalidMramAddresses;Returned when the start and stop addresses of the MRAM dump or MRAM  wipe commands are invalid (e.g. start address bigger than stop address);172;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68ab;SPVRTVIF_MramPacketParsingFailure;Returned when scanning for MRAM dump packets failed.;171;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68ad;SPVRTVIF_NoMramPacket;Expect reception of an MRAM dump packet but received space packet with other apid.;173;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68ac;SPVRTVIF_InvalidMramAddresses;Returned when the start and stop addresses of the MRAM dump or MRAM  wipe commands are invalid (e.g. start address bigger than stop address);172;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68ae;SPVRTVIF_PathDoesNotExist;Path to PLOC directory on SD card does not exist;174;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68ad;SPVRTVIF_NoMramPacket;Expect reception of an MRAM dump packet but received space packet with other apid.;173;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68af;SPVRTVIF_MramFileNotExists;MRAM dump file does not exists. The file should actually already have been created with the reception of the first dump packet.;175;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68ae;SPVRTVIF_PathDoesNotExist;Path to PLOC directory on SD card does not exist;174;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68b0;SPVRTVIF_InvalidReplyLength;No description;176;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68af;SPVRTVIF_MramFileNotExists;MRAM dump file does not exists. The file should actually already have been created with the reception of the first dump packet.;175;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68b1;SPVRTVIF_InvalidLength;Received action command has invalid length;177;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68b0;SPVRTVIF_InvalidReplyLength;No description;176;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68b2;SPVRTVIF_FilenameTooLong;Filename too long;178;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68b1;SPVRTVIF_InvalidLength;Received action command has invalid length;177;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68b3;SPVRTVIF_UpdateStatusReportInvalidLength;Received update status report with invalid packet length field;179;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68b2;SPVRTVIF_FilenameTooLong;Filename too long;178;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68b4;SPVRTVIF_UpdateCrcFailure;Update status report does not contain expected CRC. There might be a bit flip in the update memory region.;180;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68b3;SPVRTVIF_UpdateStatusReportInvalidLength;Received update status report with invalid packet length field;179;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68b5;SPVRTVIF_SupvHelperExecuting;Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command);181;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68b4;SPVRTVIF_UpdateCrcFailure;Update status report does not contain expected CRC. There might be a bit flip in the update memory region.;180;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68c0;SPVRTVIF_BufTooSmall;No description;192;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68b5;SPVRTVIF_SupvHelperExecuting;Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command);181;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x68c1;SPVRTVIF_NoReplyTimeout;No description;193;SUPV_RETURN_VALUES_IF;linux/devices/devicedefinitions/PlocSupervisorDefinitions.h
+0x68c0;SPVRTVIF_BufTooSmall;No description;192;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68c1;SPVRTVIF_NoReplyTimeout;No description;193;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
 0x6900;ACSCTRL_FileDeletionFailed;No description;0;ACS_CTRL;mission/controller/AcsController.h
 0x6a02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6a03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
@@ -588,11 +592,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x6a07;ACSMEKF_MekfNotFinite;No description;7;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6a08;ACSMEKF_MekfInitialized;No description;8;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6a09;ACSMEKF_MekfRunning;No description;9;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b02;ACSSAF_SafectrlNoMagFieldForControl;No description;2;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
+0x6b01;ACSSAF_SafectrlMekfInputInvalid;No description;1;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b03;ACSSAF_SafectrlUseMekf;No description;3;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b04;ACSSAF_SafectrlUseNonmekf;No description;4;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b05;ACSSAF_SafectrlUseDamping;No description;5;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
-0x6b06;ACSSAF_SafectrlNoSensorsForControl;No description;6;ACS_SAFE;mission/controller/acs/control/SafeCtrl.h
 0x6c01;ACSPTG_PtgctrlMekfInputInvalid;No description;1;ACS_PTG;mission/controller/acs/control/PtgCtrl.h
 0x6d01;ACSDTB_DetumbleNoSensordata;No description;1;ACS_DETUMBLE;mission/controller/acs/control/Detumble.h
 0x6e00;SDMA_OpOngoing;No description;0;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h

generators/events/translateEvents.cpp

@@ -1,7 +1,7 @@
 /**
- * @brief    Auto-generated event translation file. Contains 280 translations.
+ * @brief    Auto-generated event translation file. Contains 284 translations.
  * @details
- * Generated on: 2023-03-24 15:19:38
+ * Generated on: 2023-04-04 13:59:07
  */
 #include "translateEvents.h"
 
@@ -97,7 +97,6 @@ const char *SAFE_RATE_RECOVERY_STRING = "SAFE_RATE_RECOVERY";
 const char *MULTIPLE_RW_INVALID_STRING = "MULTIPLE_RW_INVALID";
 const char *MEKF_INVALID_INFO_STRING = "MEKF_INVALID_INFO";
 const char *MEKF_RECOVERY_STRING = "MEKF_RECOVERY";
-const char *MEKF_AUTOMATIC_RESET_STRING = "MEKF_AUTOMATIC_RESET";
 const char *MEKF_INVALID_MODE_VIOLATION_STRING = "MEKF_INVALID_MODE_VIOLATION";
 const char *SAFE_MODE_CONTROLLER_FAILURE_STRING = "SAFE_MODE_CONTROLLER_FAILURE";
 const char *SWITCH_CMD_SENT_STRING = "SWITCH_CMD_SENT";
@@ -210,6 +209,11 @@ const char *TRANSITION_OTHER_SIDE_FAILED_STRING = "TRANSITION_OTHER_SIDE_FAILED"
 const char *NOT_ENOUGH_DEVICES_DUAL_MODE_STRING = "NOT_ENOUGH_DEVICES_DUAL_MODE";
 const char *POWER_STATE_MACHINE_TIMEOUT_STRING = "POWER_STATE_MACHINE_TIMEOUT";
 const char *SIDE_SWITCH_TRANSITION_NOT_ALLOWED_STRING = "SIDE_SWITCH_TRANSITION_NOT_ALLOWED";
+const char *DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY_STRING = "DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY";
+const char *TRANSITION_OTHER_SIDE_FAILED_12900_STRING = "TRANSITION_OTHER_SIDE_FAILED_12900";
+const char *NOT_ENOUGH_DEVICES_DUAL_MODE_12901_STRING = "NOT_ENOUGH_DEVICES_DUAL_MODE_12901";
+const char *POWER_STATE_MACHINE_TIMEOUT_12902_STRING = "POWER_STATE_MACHINE_TIMEOUT_12902";
+const char *SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903_STRING = "SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903";
 const char *CHILDREN_LOST_MODE_STRING = "CHILDREN_LOST_MODE";
 const char *GPS_FIX_CHANGE_STRING = "GPS_FIX_CHANGE";
 const char *CANT_GET_FIX_STRING = "CANT_GET_FIX";
@@ -266,21 +270,25 @@ const char *I2C_UNAVAILABLE_REBOOT_STRING = "I2C_UNAVAILABLE_REBOOT";
 const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
 const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
 const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
-const char *PLOC_OVERHEATING_STRING = "PLOC_OVERHEATING";
 const char *OBC_OVERHEATING_STRING = "OBC_OVERHEATING";
-const char *HPA_OVERHEATING_STRING = "HPA_OVERHEATING";
+const char *CAMERA_OVERHEATING_STRING = "CAMERA_OVERHEATING";
-const char *PLPCDU_OVERHEATING_STRING = "PLPCDU_OVERHEATING";
+const char *PCDU_SYSTEM_OVERHEATING_STRING = "PCDU_SYSTEM_OVERHEATING";
+const char *HEATER_NOT_OFF_FOR_OFF_MODE_STRING = "HEATER_NOT_OFF_FOR_OFF_MODE";
 const char *TX_TIMER_EXPIRED_STRING = "TX_TIMER_EXPIRED";
 const char *BIT_LOCK_TX_ON_STRING = "BIT_LOCK_TX_ON";
 const char *POSSIBLE_FILE_CORRUPTION_STRING = "POSSIBLE_FILE_CORRUPTION";
 const char *FILE_TOO_LARGE_STRING = "FILE_TOO_LARGE";
 const char *BUSY_DUMPING_EVENT_STRING = "BUSY_DUMPING_EVENT";
-const char *DUMP_WAS_CANCELLED_STRING = "DUMP_WAS_CANCELLED";
 const char *DUMP_OK_STORE_DONE_STRING = "DUMP_OK_STORE_DONE";
 const char *DUMP_NOK_STORE_DONE_STRING = "DUMP_NOK_STORE_DONE";
 const char *DUMP_MISC_STORE_DONE_STRING = "DUMP_MISC_STORE_DONE";
 const char *DUMP_HK_STORE_DONE_STRING = "DUMP_HK_STORE_DONE";
 const char *DUMP_CFDP_STORE_DONE_STRING = "DUMP_CFDP_STORE_DONE";
+const char *DUMP_OK_CANCELLED_STRING = "DUMP_OK_CANCELLED";
+const char *DUMP_NOK_CANCELLED_STRING = "DUMP_NOK_CANCELLED";
+const char *DUMP_MISC_CANCELLED_STRING = "DUMP_MISC_CANCELLED";
+const char *DUMP_HK_CANCELLED_STRING = "DUMP_HK_CANCELLED";
+const char *DUMP_CFDP_CANCELLED_STRING = "DUMP_CFDP_CANCELLED";
 
 const char *translateEvents(Event event) {
   switch ((event & 0xFFFF)) {
@@ -469,10 +477,8 @@ const char *translateEvents(Event event) {
     case (11204):
       return MEKF_RECOVERY_STRING;
     case (11205):
-      return MEKF_AUTOMATIC_RESET_STRING;
-    case (11206):
       return MEKF_INVALID_MODE_VIOLATION_STRING;
-    case (11207):
+    case (11206):
       return SAFE_MODE_CONTROLLER_FAILURE_STRING;
     case (11300):
       return SWITCH_CMD_SENT_STRING;
@@ -694,6 +700,16 @@ const char *translateEvents(Event event) {
       return POWER_STATE_MACHINE_TIMEOUT_STRING;
     case (12803):
       return SIDE_SWITCH_TRANSITION_NOT_ALLOWED_STRING;
+    case (12804):
+      return DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY_STRING;
+    case (12900):
+      return TRANSITION_OTHER_SIDE_FAILED_12900_STRING;
+    case (12901):
+      return NOT_ENOUGH_DEVICES_DUAL_MODE_12901_STRING;
+    case (12902):
+      return POWER_STATE_MACHINE_TIMEOUT_12902_STRING;
+    case (12903):
+      return SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903_STRING;
     case (13000):
       return CHILDREN_LOST_MODE_STRING;
     case (13100):
@@ -806,14 +822,14 @@ const char *translateEvents(Event event) {
       return NO_HEALTHY_HEATER_AVAILABLE_STRING;
     case (14102):
       return SYRLINKS_OVERHEATING_STRING;
-    case (14103):
-      return PLOC_OVERHEATING_STRING;
     case (14104):
       return OBC_OVERHEATING_STRING;
     case (14105):
-      return HPA_OVERHEATING_STRING;
+      return CAMERA_OVERHEATING_STRING;
     case (14106):
-      return PLPCDU_OVERHEATING_STRING;
+      return PCDU_SYSTEM_OVERHEATING_STRING;
+    case (14107):
+      return HEATER_NOT_OFF_FOR_OFF_MODE_STRING;
     case (14201):
       return TX_TIMER_EXPIRED_STRING;
     case (14202):
@@ -824,8 +840,6 @@ const char *translateEvents(Event event) {
       return FILE_TOO_LARGE_STRING;
     case (14302):
       return BUSY_DUMPING_EVENT_STRING;
-    case (14303):
-      return DUMP_WAS_CANCELLED_STRING;
     case (14305):
       return DUMP_OK_STORE_DONE_STRING;
     case (14306):
@@ -836,6 +850,16 @@ const char *translateEvents(Event event) {
       return DUMP_HK_STORE_DONE_STRING;
     case (14309):
       return DUMP_CFDP_STORE_DONE_STRING;
+    case (14310):
+      return DUMP_OK_CANCELLED_STRING;
+    case (14311):
+      return DUMP_NOK_CANCELLED_STRING;
+    case (14312):
+      return DUMP_MISC_CANCELLED_STRING;
+    case (14313):
+      return DUMP_HK_CANCELLED_STRING;
+    case (14314):
+      return DUMP_CFDP_CANCELLED_STRING;
     default:
       return "UNKNOWN_EVENT";
   }

generators/objects/translateObjects.cpp

@@ -1,8 +1,8 @@
 /**
  * @brief  Auto-generated object translation file.
  * @details
- * Contains 173 translations.
+ * Contains 175 translations.
- * Generated on: 2023-03-24 15:19:38
+ * Generated on: 2023-04-04 13:59:07
  */
 #include "translateObjects.h"
 
@@ -37,6 +37,8 @@ const char *GYRO_3_L3G_HANDLER_STRING = "GYRO_3_L3G_HANDLER";
 const char *RW4_STRING = "RW4";
 const char *STAR_TRACKER_STRING = "STAR_TRACKER";
 const char *GPS_CONTROLLER_STRING = "GPS_CONTROLLER";
+const char *GPS_0_HEALTH_DEV_STRING = "GPS_0_HEALTH_DEV";
+const char *GPS_1_HEALTH_DEV_STRING = "GPS_1_HEALTH_DEV";
 const char *IMTQ_POLLING_STRING = "IMTQ_POLLING";
 const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER";
 const char *PCDU_HANDLER_STRING = "PCDU_HANDLER";
@@ -244,6 +246,10 @@ const char *translateObject(object_id_t object) {
       return STAR_TRACKER_STRING;
     case 0x44130045:
       return GPS_CONTROLLER_STRING;
+    case 0x44130046:
+      return GPS_0_HEALTH_DEV_STRING;
+    case 0x44130047:
+      return GPS_1_HEALTH_DEV_STRING;
     case 0x44140013:
       return IMTQ_POLLING_STRING;
     case 0x44140014:

generators/requirements.txt

@@ -1,2 +1,2 @@
 colorlog==6.7.0
-git+https://egit.irs.uni-stuttgart.de/fsfw/fsfwgen@v0.3.1#egg=fsfwgen
+git+https://egit.irs.uni-stuttgart.de/fsfw/fsfwgen@v0.3.2#egg=fsfwgen

linux/CMakeLists.txt

@@ -1,8 +1,11 @@
 add_subdirectory(utility)
 add_subdirectory(callbacks)
 add_subdirectory(boardtest)
-add_subdirectory(devices)
 add_subdirectory(ipcore)
+add_subdirectory(com)
+add_subdirectory(acs)
+add_subdirectory(tcs)
+add_subdirectory(payload)
 
 if(EIVE_ADD_LINUX_FSFWCONFIG)
   add_subdirectory(fsfwconfig)
@@ -10,7 +13,7 @@ endif()
 
 # Dependency on proprietary library
 if(TGT_BSP MATCHES "arm/q7s")
-  add_subdirectory(csp)
+  add_subdirectory(power)
 endif()
 
 target_sources(${OBSW_NAME} PUBLIC ObjectFactory.cpp scheduling.cpp)

linux/ObjectFactory.cpp

@@ -8,26 +8,25 @@
 #include <fsfw_hal/linux/serial/SerialCookie.h>
 #include <fsfw_hal/linux/spi/SpiComIF.h>
 #include <fsfw_hal/linux/spi/SpiCookie.h>
+#include <linux/acs/SusPolling.h>
 #include <linux/callbacks/gpioCallbacks.h>
-#include <linux/devices/Max31865RtdPolling.h>
+#include <linux/tcs/Max31865RtdPolling.h>
-#include <linux/devices/SusPolling.h>
+#include <mission/acs/SusHandler.h>
 #include <mission/controller/AcsController.h>
-#include <mission/core/GenericFactory.h>
+#include <mission/genericFactory.h>
-#include <mission/devices/LegacySusHandler.h>
+#include <mission/payload/ScexDeviceHandler.h>
-#include <mission/devices/Max31865EiveHandler.h>
+#include <mission/system/acs/SusAssembly.h>
-#include <mission/devices/ScexDeviceHandler.h>
+#include <mission/system/acs/SusFdir.h>
-#include <mission/devices/SusHandler.h>
 #include <mission/system/fdir/RtdFdir.h>
-#include <mission/system/fdir/SusFdir.h>
-#include <mission/system/objects/SusAssembly.h>
 #include <mission/system/objects/TcsBoardAssembly.h>
+#include <mission/tcs/Max31865EiveHandler.h>
 
 #include "OBSWConfig.h"
 #include "devConf.h"
 #include "devices/addresses.h"
 #include "devices/gpioIds.h"
 #include "eive/definitions.h"
-#include "mission/system/tree/acsModeTree.h"
+#include "mission/system/acs/acsModeTree.h"
 #include "mission/system/tree/payloadModeTree.h"
 #include "mission/system/tree/tcsModeTree.h"
 
@@ -328,8 +327,8 @@ void ObjectFactory::createScexComponents(std::string uartDev, PowerSwitchIF* pwr
   scexHandler->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
 }
 
-AcsController* ObjectFactory::createAcsController(bool connectSubsystem) {
+AcsController* ObjectFactory::createAcsController(bool connectSubsystem, bool enableHkSets) {
-  auto acsCtrl = new AcsController(objects::ACS_CONTROLLER);
+  auto acsCtrl = new AcsController(objects::ACS_CONTROLLER, enableHkSets);
   if (connectSubsystem) {
     acsCtrl->connectModeTreeParent(satsystem::acs::ACS_SUBSYSTEM);
   }

linux/ObjectFactory.h

@@ -3,16 +3,15 @@
 #include <fsfw/power/definitions.h>
 #include <fsfw/returnvalues/returnvalue.h>
 #include <fsfw_hal/linux/gpio/LinuxLibgpioIF.h>
+#include <mission/com/CcsdsIpCoreHandler.h>
 #include <mission/memory/SdCardMountedIF.h>
-#include <mission/tmtc/CcsdsIpCoreHandler.h>
+#include <mission/tcs/HeaterHandler.h>
 #include <mission/tmtc/CfdpTmFunnel.h>
 #include <mission/tmtc/PusTmFunnel.h>
 
 #include <optional>
 #include <string>
 
-#include "mission/devices/HeaterHandler.h"
-
 class GpioIF;
 class SpiComIF;
 class PowerSwitchIF;
@@ -31,6 +30,6 @@ void createScexComponents(std::string uartDev, PowerSwitchIF* pwrSwitcher,
 
 void gpioChecker(ReturnValue_t result, std::string output);
 
-AcsController* createAcsController(bool connectSubsystem);
+AcsController* createAcsController(bool connectSubsystem, bool enableHkSets);
 
 }  // namespace ObjectFactory

linux/acs/AcsBoardPolling.cpp

@@ -10,7 +10,7 @@
 #include <fsfw_hal/linux/UnixFileGuard.h>
 #include <fsfw_hal/linux/spi/SpiCookie.h>
 #include <fsfw_hal/linux/utility.h>
-#include <mission/devices/devicedefinitions/gyroAdisHelpers.h>
+#include <mission/acs/gyroAdisHelpers.h>
 #include <sys/ioctl.h>
 
 #include "devices/gpioIds.h"

linux/acs/AcsBoardPolling.h

@@ -7,8 +7,8 @@
 #include <fsfw/tasks/SemaphoreIF.h>
 #include <fsfw_hal/devicehandlers/devicedefinitions/mgmRm3100Helpers.h>
 #include <fsfw_hal/linux/spi/SpiComIF.h>
-#include <mission/devices/devicedefinitions/acsPolling.h>
+#include <mission/acs/acsBoardPolling.h>
-#include <mission/devices/devicedefinitions/gyroAdisHelpers.h>
+#include <mission/acs/gyroAdisHelpers.h>
 
 class AcsBoardPolling : public SystemObject,
                         public ExecutableObjectIF,

linux/acs/CMakeLists.txt

@@ -0,0 +1,7 @@
+target_sources(
+  ${OBSW_NAME} PUBLIC AcsBoardPolling.cpp ImtqPollingTask.cpp RwPollingTask.cpp
+                      SusPolling.cpp StrComHandler.cpp)
+
+if(EIVE_BUILD_GPSD_GPS_HANDLER)
+  target_sources(${OBSW_NAME} PRIVATE GpsHyperionLinuxController.cpp)
+endif()

linux/acs/GpsHyperionLinuxController.cpp

@@ -18,8 +18,11 @@
 #include <ctime>
 
 GpsHyperionLinuxController::GpsHyperionLinuxController(object_id_t objectId, object_id_t parentId,
-                                                       bool debugHyperionGps)
+                                                       bool enableHkSets, bool debugHyperionGps)
-    : ExtendedControllerBase(objectId), gpsSet(this), debugHyperionGps(debugHyperionGps) {}
+    : ExtendedControllerBase(objectId),
+      gpsSet(this),
+      enableHkSets(enableHkSets),
+      debugHyperionGps(debugHyperionGps) {}
 
 GpsHyperionLinuxController::~GpsHyperionLinuxController() {
   gps_stream(&gps, WATCH_DISABLE, nullptr);
@@ -86,7 +89,7 @@ ReturnValue_t GpsHyperionLinuxController::initializeLocalDataPool(
   localDataPoolMap.emplace(GpsHyperion::SATS_IN_USE, new PoolEntry<uint8_t>());
   localDataPoolMap.emplace(GpsHyperion::SATS_IN_VIEW, new PoolEntry<uint8_t>());
   localDataPoolMap.emplace(GpsHyperion::FIX_MODE, new PoolEntry<uint8_t>());
-  poolManager.subscribeForRegularPeriodicPacket({gpsSet.getSid(), false, 30.0});
+  poolManager.subscribeForRegularPeriodicPacket({gpsSet.getSid(), enableHkSets, 30.0});
   return returnvalue::OK;
 }
 
@@ -99,6 +102,7 @@ void GpsHyperionLinuxController::setResetPinTriggerFunction(gpioResetFunction_t
 ReturnValue_t GpsHyperionLinuxController::performOperation(uint8_t opCode) {
   handleQueue();
   poolManager.performHkOperation();
+
   while (true) {
 #if OBSW_THREAD_TRACING == 1
     trace::threadTrace(opCounter, "GPS CTRL");

linux/acs/GpsHyperionLinuxController.h

@@ -1,12 +1,13 @@
 #ifndef MISSION_DEVICES_GPSHYPERIONHANDLER_H_
 #define MISSION_DEVICES_GPSHYPERIONHANDLER_H_
 
+#include <mission/acs/archive/GPSDefinitions.h>
+#include <mission/utility/trace.h>
+
 #include "eive/eventSubsystemIds.h"
 #include "fsfw/FSFW.h"
 #include "fsfw/controller/ExtendedControllerBase.h"
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
-#include "mission/devices/devicedefinitions/GPSDefinitions.h"
-#include "mission/trace.h"
 
 #ifdef FSFW_OSAL_LINUX
 #include <gps.h>
@@ -28,7 +29,7 @@ class GpsHyperionLinuxController : public ExtendedControllerBase {
 
   enum ReadModes { SHM = 0, SOCKET = 1 };
 
-  GpsHyperionLinuxController(object_id_t objectId, object_id_t parentId,
+  GpsHyperionLinuxController(object_id_t objectId, object_id_t parentId, bool enableHkSets,
                              bool debugHyperionGps = false);
   virtual ~GpsHyperionLinuxController();
 
@@ -57,6 +58,7 @@ class GpsHyperionLinuxController : public ExtendedControllerBase {
  private:
   GpsPrimaryDataset gpsSet;
   gps_data_t gps = {};
+  bool enableHkSets = false;
   const char* currentClientBuf = nullptr;
   ReadModes readMode = ReadModes::SOCKET;
   Countdown maxTimeToReachFix = Countdown(MAX_SECONDS_TO_REACH_FIX * 1000);

linux/acs/ImtqPollingTask.cpp

@@ -27,7 +27,7 @@ ReturnValue_t ImtqPollingTask::performOperation(uint8_t operationCode) {
 
     comStatus = returnvalue::OK;
     // Stopwatch watch;
-    switch (currentRequest) {
+    switch (currentRequest.requestType) {
       case imtq::RequestType::MEASURE_NO_ACTUATION: {
         // Measured to take 24 ms for debug and release builds.
         // Stopwatch watch;
@@ -51,6 +51,30 @@ void ImtqPollingTask::handleMeasureStep() {
   uint8_t* replyPtr;
   ImtqRepliesDefault replies(replyBuf.data());
   // If some startup handling is added later, set configured after it was done once.
+  if (performStartup) {
+    // Set integration time for the MGM.
+    cmdBuf[0] = imtq::CC::SET_PARAM;
+    size_t dummy = 0;
+    SerializeAdapter::serialize(&imtq::param::INTEGRATION_TIME_SELECT, cmdBuf.data() + 1, &dummy,
+                                cmdBuf.size(), SerializeIF::Endianness::LITTLE);
+    cmdBuf[3] = currentRequest.integrationTimeSel;
+    cmdLen = 4;
+    ReturnValue_t result = performI2cFullRequest(replyBuf.data(), 5);
+    if (result != returnvalue::OK) {
+      comStatus = imtq::STARTUP_CFG_ERROR;
+    }
+    if (replyBuf[0] != imtq::CC::SET_PARAM) {
+      sif::error << "ImtqPollingTask: First byte of reply not equal to sent CC" << std::endl;
+      comStatus = imtq::STARTUP_CFG_ERROR;
+    }
+    if (replyBuf[4] != currentRequest.integrationTimeSel) {
+      sif::error << "ImtqPollingTask: Integration time configuration failed" << std::endl;
+      comStatus = imtq::STARTUP_CFG_ERROR;
+    }
+    currentIntegrationTimeMs =
+        imtq::integrationTimeFromSelectValue(currentRequest.integrationTimeSel);
+    performStartup = false;
+  }
   replies.setConfigured();
 
   // Can be used later to verify correct timing (e.g. all data has been read)
@@ -73,7 +97,7 @@ void ImtqPollingTask::handleMeasureStep() {
     return;
   }
 
-  if (specialRequest != imtq::SpecialRequest::NONE) {
+  if (currentRequest.specialRequest != imtq::SpecialRequest::NONE) {
     auto executeSelfTest = [&](imtq::selfTest::Axis axis) {
       cmdBuf[0] = imtq::CC::SELF_TEST_CMD;
       cmdBuf[1] = axis;
@@ -81,7 +105,7 @@ void ImtqPollingTask::handleMeasureStep() {
     };
     // If a self-test is already ongoing, ignore the request.
     if (replies.getSystemState()[2] != static_cast<uint8_t>(imtq::mode::SELF_TEST)) {
-      switch (specialRequest) {
+      switch (currentRequest.specialRequest) {
         case (imtq::SpecialRequest::DO_SELF_TEST_POS_X): {
           executeSelfTest(imtq::selfTest::Axis::X_POSITIVE);
           break;
@@ -234,18 +258,21 @@ ReturnValue_t ImtqPollingTask::initializeInterface(CookieIF* cookie) {
 ReturnValue_t ImtqPollingTask::sendMessage(CookieIF* cookie, const uint8_t* sendData,
                                            size_t sendLen) {
   const auto* imtqReq = reinterpret_cast<const imtq::Request*>(sendData);
+  if (sendLen != sizeof(imtq::Request)) {
+    return returnvalue::FAILED;
+  }
   {
     MutexGuard mg(ipcLock);
-    if (imtqReq->request == imtq::RequestType::ACTUATE) {
-      std::memcpy(dipoles, imtqReq->dipoles, sizeof(dipoles));
-      torqueDuration = imtqReq->torqueDuration;
-    }
-    currentRequest = imtqReq->request;
-    specialRequest = imtqReq->specialRequest;
     if (state != InternalState::IDLE) {
       return returnvalue::FAILED;
     }
     state = InternalState::IS_BUSY;
+    if (currentRequest.mode != imtqReq->mode) {
+      if (imtqReq->mode == acs::SimpleSensorMode::NORMAL) {
+        performStartup = true;
+      }
+    }
+    std::memcpy(&currentRequest, imtqReq, sendLen);
   }
   semaphore->release();
 
@@ -345,10 +372,10 @@ void ImtqPollingTask::buildDipoleCommand() {
   uint8_t* serPtr = cmdBuf.data() + 1;
   size_t serLen = 0;
   for (uint8_t idx = 0; idx < 3; idx++) {
-    SerializeAdapter::serialize(&dipoles[idx], &serPtr, &serLen, cmdBuf.size(),
+    SerializeAdapter::serialize(&currentRequest.dipoles[idx], &serPtr, &serLen, cmdBuf.size(),
                                 SerializeIF::Endianness::LITTLE);
   }
-  SerializeAdapter::serialize(&torqueDuration, &serPtr, &serLen, cmdBuf.size(),
+  SerializeAdapter::serialize(&currentRequest.torqueDuration, &serPtr, &serLen, cmdBuf.size(),
                               SerializeIF::Endianness::LITTLE);
   // sif::debug << "Dipole X: " << dipoles[0] << std::endl;
   // sif::debug << "Torqeu Dur: " << torqueDuration << std::endl;
@@ -357,22 +384,28 @@ void ImtqPollingTask::buildDipoleCommand() {
 
 ReturnValue_t ImtqPollingTask::readReceivedMessage(CookieIF* cookie, uint8_t** buffer,
                                                    size_t* size) {
-  imtq::RequestType currentRequest;
+  imtq::Request currentRequest;
   {
     MutexGuard mg(ipcLock);
-    currentRequest = this->currentRequest;
+    std::memcpy(&currentRequest, &this->currentRequest, sizeof(currentRequest));
   }
 
   size_t replyLen = 0;
-  MutexGuard mg(bufLock);
+  {
-  if (currentRequest == imtq::RequestType::MEASURE_NO_ACTUATION) {
+    MutexGuard mg(bufLock);
-    replyLen = getExchangeBufLen(specialRequest);
+    if (currentRequest.requestType == imtq::RequestType::MEASURE_NO_ACTUATION) {
-    memcpy(exchangeBuf.data(), replyBuf.data(), replyLen);
+      replyLen = getExchangeBufLen(currentRequest.specialRequest);
-  } else if (currentRequest == imtq::RequestType::ACTUATE) {
+      memcpy(exchangeBuf.data(), replyBuf.data(), replyLen);
-    replyLen = ImtqRepliesWithTorque::BASE_LEN;
+    } else if (currentRequest.requestType == imtq::RequestType::ACTUATE) {
-    memcpy(exchangeBuf.data(), replyBufActuation.data(), replyLen);
+      replyLen = ImtqRepliesWithTorque::BASE_LEN;
-  } else {
+      memcpy(exchangeBuf.data(), replyBufActuation.data(), replyLen);
-    *size = 0;
+    } else {
+      *size = 0;
+    }
+  }
+  {
+    MutexGuard mg(ipcLock);
+    this->currentRequest.requestType = imtq::RequestType::DO_NOTHING;
   }
   *buffer = exchangeBuf.data();
   *size = replyLen;
@@ -417,6 +450,7 @@ void ImtqPollingTask::clearReadFlagsWithTorque(ImtqRepliesWithTorque& replies) {
 ReturnValue_t ImtqPollingTask::performI2cFullRequest(uint8_t* reply, size_t replyLen) {
   int fd = 0;
   if (cmdLen == 0 or reply == nullptr) {
+    sif::error << "ImtqPollingTask: Command lenght is zero or reply PTR is invalid" << std::endl;
     return returnvalue::FAILED;
   }
 

linux/acs/ImtqPollingTask.h

@@ -3,13 +3,14 @@
 
 #include <fsfw/tasks/SemaphoreIF.h>
 #include <fsfw_hal/linux/i2c/I2cCookie.h>
+#include <mission/acs/acsBoardPolling.h>
 
 #include <atomic>
 
 #include "fsfw/devicehandlers/DeviceCommunicationIF.h"
 #include "fsfw/objectmanager/SystemObject.h"
 #include "fsfw/tasks/ExecutableObjectIF.h"
-#include "mission/devices/devicedefinitions/imtqHelpers.h"
+#include "mission/acs/imtqHelpers.h"
 
 class ImtqPollingTask : public SystemObject,
                         public ExecutableObjectIF,
@@ -24,7 +25,6 @@ class ImtqPollingTask : public SystemObject,
   static constexpr ReturnValue_t NO_REPLY_AVAILABLE = returnvalue::makeCode(2, 0);
 
   enum class InternalState { IDLE, IS_BUSY } state = InternalState::IDLE;
-  imtq::RequestType currentRequest = imtq::RequestType::MEASURE_NO_ACTUATION;
 
   SemaphoreIF* semaphore;
   ReturnValue_t comStatus = returnvalue::OK;
@@ -38,10 +38,9 @@ class ImtqPollingTask : public SystemObject,
   // Required in addition to integration time, otherwise old data might be read.
   static constexpr uint32_t MGM_READ_BUFFER_TIME_MS = 6;
   bool ignoreNextActuateRequest = false;
+  bool performStartup = false;
 
-  imtq::SpecialRequest specialRequest = imtq::SpecialRequest::NONE;
+  imtq::Request currentRequest{};
-  int16_t dipoles[3] = {};
-  uint16_t torqueDuration = 0;
 
   std::array<uint8_t, 32> cmdBuf;
   std::array<uint8_t, 524> replyBuf;

linux/acs/RwPollingTask.cpp

@@ -11,7 +11,7 @@
 #include <unistd.h>
 
 #include "devConf.h"
-#include "mission/devices/devicedefinitions/rwHelpers.h"
+#include "mission/acs/rwHelpers.h"
 
 RwPollingTask::RwPollingTask(object_id_t objectId, const char* spiDev, GpioIF& gpioIF)
     : SystemObject(objectId), spiDev(spiDev), gpioIF(gpioIF) {

linux/acs/RwPollingTask.h

@@ -9,7 +9,7 @@
 #include <fsfw_hal/linux/spi/SpiComIF.h>
 #include <fsfw_hal/linux/spi/SpiCookie.h>
 
-#include "mission/devices/devicedefinitions/rwHelpers.h"
+#include "mission/acs/rwHelpers.h"
 
 class RwCookie : public SpiCookie {
   friend class RwPollingTask;

linux/acs/StrComHandler.cpp

@@ -1,8 +1,10 @@
+#include "StrComHandler.h"
+
 #include <fcntl.h>
 #include <fsfw/filesystem/HasFileSystemIF.h>
 #include <fsfw/tasks/TaskFactory.h>
 #include <fsfw/timemanager/Stopwatch.h>
-#include <linux/devices/startracker/StrComHandler.h>
+#include <mission/acs/str/strHelpers.h>
 #include <unistd.h>
 
 #include <filesystem>
@@ -11,8 +13,6 @@
 #include "OBSWConfig.h"
 #include "eive/definitions.h"
 #include "fsfw/timemanager/Countdown.h"
-#include "helpers.h"
-#include "linux/devices/devicedefinitions/StarTrackerDefinitions.h"
 #include "mission/utility/Filenaming.h"
 #include "mission/utility/ProgressPrinter.h"
 #include "mission/utility/Timestamp.h"
@@ -42,7 +42,6 @@ ReturnValue_t StrComHandler::performOperation(uint8_t operationCode) {
   while (true) {
     lock->lockMutex();
     state = InternalState::SLEEPING;
-    datalinkLayer.reset();
     lock->unlockMutex();
     semaphore.acquire();
     switch (state) {
@@ -58,6 +57,7 @@ ReturnValue_t StrComHandler::performOperation(uint8_t operationCode) {
       }
       case InternalState::UPLOAD_IMAGE: {
         replyTimeout.setTimeout(200);
+        resetReplyHandlingState();
         result = performImageUpload();
         if (result == returnvalue::OK) {
           triggerEvent(IMAGE_UPLOAD_SUCCESSFUL);
@@ -68,6 +68,7 @@ ReturnValue_t StrComHandler::performOperation(uint8_t operationCode) {
       }
       case InternalState::DOWNLOAD_IMAGE: {
         replyTimeout.setTimeout(200);
+        resetReplyHandlingState();
         result = performImageDownload();
         if (result == returnvalue::OK) {
           triggerEvent(IMAGE_DOWNLOAD_SUCCESSFUL);
@@ -78,6 +79,7 @@ ReturnValue_t StrComHandler::performOperation(uint8_t operationCode) {
       }
       case InternalState::FLASH_READ: {
         replyTimeout.setTimeout(200);
+        resetReplyHandlingState();
         result = performFlashRead();
         if (result == returnvalue::OK) {
           triggerEvent(FLASH_READ_SUCCESSFUL);
@@ -88,6 +90,7 @@ ReturnValue_t StrComHandler::performOperation(uint8_t operationCode) {
       }
       case InternalState::FIRMWARE_UPDATE: {
         replyTimeout.setTimeout(200);
+        resetReplyHandlingState();
         result = performFirmwareUpdate();
         if (result == returnvalue::OK) {
           triggerEvent(FIRMWARE_UPDATE_SUCCESSFUL);
@@ -553,12 +556,12 @@ ReturnValue_t StrComHandler::sendAndRead(size_t size, uint32_t failParameter) {
 }
 
 ReturnValue_t StrComHandler::checkActionReply(size_t replySize) {
-  uint8_t type = str::getReplyFrameType(replyPtr);
+  uint8_t type = startracker::getReplyFrameType(replyPtr);
   if (type != TMTC_ACTIONREPLY) {
     sif::warning << "StrHelper::checkActionReply: Received reply with invalid type ID" << std::endl;
     return INVALID_TYPE_ID;
   }
-  uint8_t status = str::getStatusField(replyPtr);
+  uint8_t status = startracker::getStatusField(replyPtr);
   if (status != ArcsecDatalinkLayer::STATUS_OK) {
     sif::warning << "StrHelper::checkActionReply: Status failure: "
                  << static_cast<unsigned int>(status) << std::endl;
@@ -645,7 +648,8 @@ ReturnValue_t StrComHandler::sendMessage(CookieIF* cookie, const uint8_t* sendDa
       return BUSY;
     }
   }
-  serial::flushRxBuf(serialPort);
+  // Ensure consistent state.
+  resetReplyHandlingState();
 
   const uint8_t* txFrame;
   size_t frameLen;
@@ -697,6 +701,7 @@ ReturnValue_t StrComHandler::readReceivedMessage(CookieIF* cookie, uint8_t** buf
     *buffer = const_cast<uint8_t*>(replyPtr);
     *size = replyLen;
   }
+  replyLen = 0;
   return replyResult;
 }
 
@@ -781,3 +786,8 @@ ReturnValue_t StrComHandler::readOneReply(uint32_t failParameter) {
     }
   }
 }
+
+void StrComHandler::resetReplyHandlingState() {
+  serial::flushRxBuf(serialPort);
+  datalinkLayer.reset();
+}

linux/acs/StrComHandler.h

@@ -1,9 +1,10 @@
 #ifndef BSP_Q7S_DEVICES_STRHELPER_H_
 #define BSP_Q7S_DEVICES_STRHELPER_H_
 
+#include <mission/acs/str/ArcsecDatalinkLayer.h>
+
 #include <string>
 
-#include "ArcsecDatalinkLayer.h"
 #include "OBSWConfig.h"
 
 #ifdef XIPHOS_Q7S
@@ -373,6 +374,8 @@ class StrComHandler : public SystemObject, public DeviceCommunicationIF, public
    * @return
    */
   ReturnValue_t readOneReply(uint32_t failParameter);
+
+  void resetReplyHandlingState();
 };
 
 #endif /* BSP_Q7S_DEVICES_STRHELPER_H_ */

linux/acs/SusPolling.cpp

@@ -4,12 +4,11 @@
 #include <fsfw/tasks/TaskFactory.h>
 #include <fsfw/timemanager/Stopwatch.h>
 #include <fsfw_hal/linux/spi/SpiCookie.h>
+#include <mission/acs/susMax1227Helpers.h>
 #include <mission/controller/acs/AcsParameters.h>
-#include <mission/devices/max1227.h>
+#include <mission/tcs/max1227.h>
 #include <unistd.h>
 
-#include "mission/devices/devicedefinitions/susMax1227Helpers.h"
-
 using namespace returnvalue;
 
 SusPolling::SusPolling(object_id_t objectId, SpiComIF& spiComIF, GpioIF& gpioIF)

linux/acs/SusPolling.h

@@ -8,7 +8,7 @@
 #include <fsfw_hal/linux/spi/SpiComIF.h>
 
 #include "devices/addresses.h"
-#include "mission/devices/devicedefinitions/acsPolling.h"
+#include "mission/acs/acsBoardPolling.h"
 
 class SusPolling : public SystemObject, public ExecutableObjectIF, public DeviceCommunicationIF {
  public:

linux/boardtest/I2cTestClass.h

@@ -1,13 +1,12 @@
 #ifndef LINUX_BOARDTEST_I2CTESTCLASS_H_
 #define LINUX_BOARDTEST_I2CTESTCLASS_H_
 
+#include <mission/power/bpxBattDefs.h>
 #include <test/TestTask.h>
 
 #include <array>
 #include <string>
 
-#include "mission/devices/devicedefinitions/BpxBatteryDefinitions.h"
-
 class I2cTestClass : public TestTask {
  public:
   I2cTestClass(object_id_t objectId, std::string i2cdev);

linux/boardtest/SpiTestClass.cpp

@@ -18,8 +18,9 @@
 #if defined(XIPHOS_Q7S)
 #include "busConf.h"
 #endif
+#include <mission/tcs/max1227.h>
+
 #include "devices/gpioIds.h"
-#include "mission/devices/max1227.h"
 
 SpiTestClass::SpiTestClass(object_id_t objectId, GpioIF *gpioIF)
     : TestTask(objectId), gpioIF(gpioIF) {

linux/boardtest/UartTestClass.cpp

@@ -4,9 +4,10 @@
 #include <fcntl.h>  // Contains file controls like O_RDWR
 #include <fsfw/tasks/TaskFactory.h>
 #include <fsfw_hal/linux/serial/SerialCookie.h>
-#include <linux/devices/ScexDleParser.h>
+#include <linux/payload/ScexDleParser.h>
-#include <linux/devices/ScexHelper.h>
+#include <linux/payload/ScexHelper.h>
-#include <linux/devices/ScexUartReader.h>
+#include <linux/payload/ScexUartReader.h>
+#include <mission/payload/scexHelpers.h>
 #include <unistd.h>  // write(), read(), close()
 
 #include <random>
@@ -18,7 +19,6 @@
 #include "fsfw/globalfunctions/DleEncoder.h"
 #include "fsfw/globalfunctions/arrayprinter.h"
 #include "fsfw/serviceinterface.h"
-#include "mission/devices/devicedefinitions/ScexDefinitions.h"
 
 #define GPS_REPLY_WIRETAPPING 0
 

linux/boardtest/UartTestClass.h

@@ -6,12 +6,12 @@
 #include <fsfw/globalfunctions/DleParser.h>
 #include <fsfw/timemanager/Countdown.h>
 #include <fsfw_hal/linux/serial/SerialCookie.h>
+#include <mission/payload/scexHelpers.h>
 #include <termios.h>  // Contains POSIX terminal control definitions
 
 #include <array>
 
 //#include "lwgps/lwgps.h"
-#include "mission/devices/devicedefinitions/ScexDefinitions.h"
 #include "test/TestTask.h"
 
 class ScexUartReader;

linux/com/CMakeLists.txt

@@ -0,0 +1 @@
+target_sources(${OBSW_NAME} PUBLIC SyrlinksComHandler.cpp)

linux/devices/CMakeLists.txt

@@ -1,22 +0,0 @@
-if(EIVE_BUILD_GPSD_GPS_HANDLER)
-  target_sources(${OBSW_NAME} PRIVATE GpsHyperionLinuxController.cpp)
-endif()
-
-target_sources(
-  ${OBSW_NAME}
-  PRIVATE Max31865RtdPolling.cpp
-          ScexUartReader.cpp
-          ImtqPollingTask.cpp
-          SusPolling.cpp
-          ScexDleParser.cpp
-          ScexHelper.cpp
-          RwPollingTask.cpp
-          AcsBoardPolling.cpp
-          SyrlinksComHandler.cpp)
-
-add_subdirectory(ploc)
-
-# Dependency on proprietary library
-if(TGT_BSP MATCHES "arm/q7s")
-  add_subdirectory(startracker)
-endif()

linux/devices/ploc/CMakeLists.txt

@@ -1,4 +0,0 @@
-target_sources(
-  ${OBSW_NAME}
-  PRIVATE PlocSupervisorHandler.cpp PlocMemoryDumper.cpp PlocMPSoCHandler.cpp
-          PlocMPSoCHelper.cpp PlocSupvUartMan.cpp)

linux/devices/startracker/helpers.cpp

@@ -1,7 +0,0 @@
-#include "helpers.h"
-
-uint8_t str::getReplyFrameType(const uint8_t* rawFrame) { return rawFrame[0]; }
-
-uint8_t str::getId(const uint8_t* rawFrame) { return rawFrame[1]; }
-
-uint8_t str::getStatusField(const uint8_t* rawFrame) { return rawFrame[2]; }

linux/devices/startracker/helpers.h

@@ -1,17 +0,0 @@
-#ifndef LINUX_DEVICES_STARTRACKER_HELPERS_H_
-#define LINUX_DEVICES_STARTRACKER_HELPERS_H_
-
-#include "arcsec/common/genericstructs.h"
-
-namespace str {
-
-/**
- * @brief    Returns the frame type field of a decoded frame.
- */
-uint8_t getReplyFrameType(const uint8_t* rawFrame);
-uint8_t getId(const uint8_t* rawFrame);
-uint8_t getStatusField(const uint8_t* rawFrame);
-
-}  // namespace str
-
-#endif /* LINUX_DEVICES_STARTRACKER_HELPERS_H_ */

linux/fsfwconfig/events/translateEvents.cpp

@@ -1,7 +1,7 @@
 /**
- * @brief    Auto-generated event translation file. Contains 280 translations.
+ * @brief    Auto-generated event translation file. Contains 284 translations.
  * @details
- * Generated on: 2023-03-24 15:19:38
+ * Generated on: 2023-04-04 13:59:07
  */
 #include "translateEvents.h"
 
@@ -97,7 +97,6 @@ const char *SAFE_RATE_RECOVERY_STRING = "SAFE_RATE_RECOVERY";
 const char *MULTIPLE_RW_INVALID_STRING = "MULTIPLE_RW_INVALID";
 const char *MEKF_INVALID_INFO_STRING = "MEKF_INVALID_INFO";
 const char *MEKF_RECOVERY_STRING = "MEKF_RECOVERY";
-const char *MEKF_AUTOMATIC_RESET_STRING = "MEKF_AUTOMATIC_RESET";
 const char *MEKF_INVALID_MODE_VIOLATION_STRING = "MEKF_INVALID_MODE_VIOLATION";
 const char *SAFE_MODE_CONTROLLER_FAILURE_STRING = "SAFE_MODE_CONTROLLER_FAILURE";
 const char *SWITCH_CMD_SENT_STRING = "SWITCH_CMD_SENT";
@@ -210,6 +209,11 @@ const char *TRANSITION_OTHER_SIDE_FAILED_STRING = "TRANSITION_OTHER_SIDE_FAILED"
 const char *NOT_ENOUGH_DEVICES_DUAL_MODE_STRING = "NOT_ENOUGH_DEVICES_DUAL_MODE";
 const char *POWER_STATE_MACHINE_TIMEOUT_STRING = "POWER_STATE_MACHINE_TIMEOUT";
 const char *SIDE_SWITCH_TRANSITION_NOT_ALLOWED_STRING = "SIDE_SWITCH_TRANSITION_NOT_ALLOWED";
+const char *DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY_STRING = "DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY";
+const char *TRANSITION_OTHER_SIDE_FAILED_12900_STRING = "TRANSITION_OTHER_SIDE_FAILED_12900";
+const char *NOT_ENOUGH_DEVICES_DUAL_MODE_12901_STRING = "NOT_ENOUGH_DEVICES_DUAL_MODE_12901";
+const char *POWER_STATE_MACHINE_TIMEOUT_12902_STRING = "POWER_STATE_MACHINE_TIMEOUT_12902";
+const char *SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903_STRING = "SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903";
 const char *CHILDREN_LOST_MODE_STRING = "CHILDREN_LOST_MODE";
 const char *GPS_FIX_CHANGE_STRING = "GPS_FIX_CHANGE";
 const char *CANT_GET_FIX_STRING = "CANT_GET_FIX";
@@ -266,21 +270,25 @@ const char *I2C_UNAVAILABLE_REBOOT_STRING = "I2C_UNAVAILABLE_REBOOT";
 const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
 const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
 const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
-const char *PLOC_OVERHEATING_STRING = "PLOC_OVERHEATING";
 const char *OBC_OVERHEATING_STRING = "OBC_OVERHEATING";
-const char *HPA_OVERHEATING_STRING = "HPA_OVERHEATING";
+const char *CAMERA_OVERHEATING_STRING = "CAMERA_OVERHEATING";
-const char *PLPCDU_OVERHEATING_STRING = "PLPCDU_OVERHEATING";
+const char *PCDU_SYSTEM_OVERHEATING_STRING = "PCDU_SYSTEM_OVERHEATING";
+const char *HEATER_NOT_OFF_FOR_OFF_MODE_STRING = "HEATER_NOT_OFF_FOR_OFF_MODE";
 const char *TX_TIMER_EXPIRED_STRING = "TX_TIMER_EXPIRED";
 const char *BIT_LOCK_TX_ON_STRING = "BIT_LOCK_TX_ON";
 const char *POSSIBLE_FILE_CORRUPTION_STRING = "POSSIBLE_FILE_CORRUPTION";
 const char *FILE_TOO_LARGE_STRING = "FILE_TOO_LARGE";
 const char *BUSY_DUMPING_EVENT_STRING = "BUSY_DUMPING_EVENT";
-const char *DUMP_WAS_CANCELLED_STRING = "DUMP_WAS_CANCELLED";
 const char *DUMP_OK_STORE_DONE_STRING = "DUMP_OK_STORE_DONE";
 const char *DUMP_NOK_STORE_DONE_STRING = "DUMP_NOK_STORE_DONE";
 const char *DUMP_MISC_STORE_DONE_STRING = "DUMP_MISC_STORE_DONE";
 const char *DUMP_HK_STORE_DONE_STRING = "DUMP_HK_STORE_DONE";
 const char *DUMP_CFDP_STORE_DONE_STRING = "DUMP_CFDP_STORE_DONE";
+const char *DUMP_OK_CANCELLED_STRING = "DUMP_OK_CANCELLED";
+const char *DUMP_NOK_CANCELLED_STRING = "DUMP_NOK_CANCELLED";
+const char *DUMP_MISC_CANCELLED_STRING = "DUMP_MISC_CANCELLED";
+const char *DUMP_HK_CANCELLED_STRING = "DUMP_HK_CANCELLED";
+const char *DUMP_CFDP_CANCELLED_STRING = "DUMP_CFDP_CANCELLED";
 
 const char *translateEvents(Event event) {
   switch ((event & 0xFFFF)) {
@@ -469,10 +477,8 @@ const char *translateEvents(Event event) {
     case (11204):
       return MEKF_RECOVERY_STRING;
     case (11205):
-      return MEKF_AUTOMATIC_RESET_STRING;
-    case (11206):
       return MEKF_INVALID_MODE_VIOLATION_STRING;
-    case (11207):
+    case (11206):
       return SAFE_MODE_CONTROLLER_FAILURE_STRING;
     case (11300):
       return SWITCH_CMD_SENT_STRING;
@@ -694,6 +700,16 @@ const char *translateEvents(Event event) {
       return POWER_STATE_MACHINE_TIMEOUT_STRING;
     case (12803):
       return SIDE_SWITCH_TRANSITION_NOT_ALLOWED_STRING;
+    case (12804):
+      return DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY_STRING;
+    case (12900):
+      return TRANSITION_OTHER_SIDE_FAILED_12900_STRING;
+    case (12901):
+      return NOT_ENOUGH_DEVICES_DUAL_MODE_12901_STRING;
+    case (12902):
+      return POWER_STATE_MACHINE_TIMEOUT_12902_STRING;
+    case (12903):
+      return SIDE_SWITCH_TRANSITION_NOT_ALLOWED_12903_STRING;
     case (13000):
       return CHILDREN_LOST_MODE_STRING;
     case (13100):
@@ -806,14 +822,14 @@ const char *translateEvents(Event event) {
       return NO_HEALTHY_HEATER_AVAILABLE_STRING;
     case (14102):
       return SYRLINKS_OVERHEATING_STRING;
-    case (14103):
-      return PLOC_OVERHEATING_STRING;
     case (14104):
       return OBC_OVERHEATING_STRING;
     case (14105):
-      return HPA_OVERHEATING_STRING;
+      return CAMERA_OVERHEATING_STRING;
     case (14106):
-      return PLPCDU_OVERHEATING_STRING;
+      return PCDU_SYSTEM_OVERHEATING_STRING;
+    case (14107):
+      return HEATER_NOT_OFF_FOR_OFF_MODE_STRING;
     case (14201):
       return TX_TIMER_EXPIRED_STRING;
     case (14202):
@@ -824,8 +840,6 @@ const char *translateEvents(Event event) {
       return FILE_TOO_LARGE_STRING;
     case (14302):
       return BUSY_DUMPING_EVENT_STRING;
-    case (14303):
-      return DUMP_WAS_CANCELLED_STRING;
     case (14305):
       return DUMP_OK_STORE_DONE_STRING;
     case (14306):
@@ -836,6 +850,16 @@ const char *translateEvents(Event event) {
       return DUMP_HK_STORE_DONE_STRING;
     case (14309):
       return DUMP_CFDP_STORE_DONE_STRING;
+    case (14310):
+      return DUMP_OK_CANCELLED_STRING;
+    case (14311):
+      return DUMP_NOK_CANCELLED_STRING;
+    case (14312):
+      return DUMP_MISC_CANCELLED_STRING;
+    case (14313):
+      return DUMP_HK_CANCELLED_STRING;
+    case (14314):
+      return DUMP_CFDP_CANCELLED_STRING;
     default:
       return "UNKNOWN_EVENT";
   }

linux/fsfwconfig/objects/translateObjects.cpp

@@ -1,8 +1,8 @@
 /**
  * @brief  Auto-generated object translation file.
  * @details
- * Contains 173 translations.
+ * Contains 175 translations.
- * Generated on: 2023-03-24 15:19:38
+ * Generated on: 2023-04-04 13:59:07
  */
 #include "translateObjects.h"
 
@@ -37,6 +37,8 @@ const char *GYRO_3_L3G_HANDLER_STRING = "GYRO_3_L3G_HANDLER";
 const char *RW4_STRING = "RW4";
 const char *STAR_TRACKER_STRING = "STAR_TRACKER";
 const char *GPS_CONTROLLER_STRING = "GPS_CONTROLLER";
+const char *GPS_0_HEALTH_DEV_STRING = "GPS_0_HEALTH_DEV";
+const char *GPS_1_HEALTH_DEV_STRING = "GPS_1_HEALTH_DEV";
 const char *IMTQ_POLLING_STRING = "IMTQ_POLLING";
 const char *IMTQ_HANDLER_STRING = "IMTQ_HANDLER";
 const char *PCDU_HANDLER_STRING = "PCDU_HANDLER";
@@ -244,6 +246,10 @@ const char *translateObject(object_id_t object) {
       return STAR_TRACKER_STRING;
     case 0x44130045:
       return GPS_CONTROLLER_STRING;
+    case 0x44130046:
+      return GPS_0_HEALTH_DEV_STRING;
+    case 0x44130047:
+      return GPS_1_HEALTH_DEV_STRING;
     case 0x44140013:
       return IMTQ_POLLING_STRING;
     case 0x44140014:

linux/ipcore/AxiPtmeConfig.cpp

@@ -1,5 +1,7 @@
 #include "AxiPtmeConfig.h"
 
+#include <fsfw/ipc/MutexGuard.h>
+
 #include "fsfw/serviceinterface/ServiceInterface.h"
 #include "fsfw_hal/linux/uio/UioMapper.h"
 
@@ -39,97 +41,59 @@ ReturnValue_t AxiPtmeConfig::writeCaduRateReg(uint8_t rateVal) {
   return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::enableTxclockManipulator() {
+void AxiPtmeConfig::enableTxclockManipulator() {
-  ReturnValue_t result = writeBit(COMMON_CONFIG_REG, true, BitPos::EN_TX_CLK_MANIPULATOR);
+  writeBit(COMMON_CONFIG_REG, true, BitPos::EN_TX_CLK_MANIPULATOR);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::disableTxclockManipulator() {
+void AxiPtmeConfig::disableTxclockManipulator() {
-  ReturnValue_t result = writeBit(COMMON_CONFIG_REG, false, BitPos::EN_TX_CLK_MANIPULATOR);
+  writeBit(COMMON_CONFIG_REG, false, BitPos::EN_TX_CLK_MANIPULATOR);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::enableTxclockInversion() {
+void AxiPtmeConfig::enableTxclockInversion() {
-  ReturnValue_t result = writeBit(COMMON_CONFIG_REG, true, BitPos::INVERT_CLOCK);
+  writeBit(COMMON_CONFIG_REG, true, BitPos::INVERT_CLOCK);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::disableTxclockInversion() {
+void AxiPtmeConfig::disableTxclockInversion() {
-  ReturnValue_t result = writeBit(COMMON_CONFIG_REG, false, BitPos::INVERT_CLOCK);
+  writeBit(COMMON_CONFIG_REG, false, BitPos::INVERT_CLOCK);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::enableBatPriorityBit() {
+void AxiPtmeConfig::enableBatPriorityBit() {
-  ReturnValue_t result = writeBit(COMMON_CONFIG_REG, true, BitPos::EN_BAT_PRIORITY);
+  writeBit(COMMON_CONFIG_REG, true, BitPos::EN_BAT_PRIORITY);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::disableBatPriorityBit() {
+void AxiPtmeConfig::disableBatPriorityBit() {
-  ReturnValue_t result = writeBit(COMMON_CONFIG_REG, false, BitPos::EN_BAT_PRIORITY);
+  writeBit(COMMON_CONFIG_REG, false, BitPos::EN_BAT_PRIORITY);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::writeReg(uint32_t regOffset, uint32_t writeVal) {
+void AxiPtmeConfig::writeReg(uint32_t regOffset, uint32_t writeVal) {
-  ReturnValue_t result = returnvalue::OK;
+  MutexGuard mg(mutex, timeoutType, mutexTimeout);
-  result = mutex->lockMutex(timeoutType, mutexTimeout);
-  if (result != returnvalue::OK) {
-    sif::warning << "AxiPtmeConfig::readReg: Failed to lock mutex" << std::endl;
-    return returnvalue::FAILED;
-  }
   *(baseAddress + regOffset / ADRESS_DIVIDER) = writeVal;
-  result = mutex->unlockMutex();
-  if (result != returnvalue::OK) {
-    sif::warning << "AxiPtmeConfig::readReg: Failed to unlock mutex" << std::endl;
-    return returnvalue::FAILED;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::readReg(uint32_t regOffset, uint32_t* readVal) {
+uint32_t AxiPtmeConfig::readReg(uint32_t regOffset) {
-  ReturnValue_t result = returnvalue::OK;
+  MutexGuard mg(mutex, timeoutType, mutexTimeout);
-  result = mutex->lockMutex(timeoutType, mutexTimeout);
+  return *(baseAddress + regOffset / ADRESS_DIVIDER);
-  if (result != returnvalue::OK) {
-    sif::warning << "AxiPtmeConfig::readReg: Failed to lock mutex" << std::endl;
-    return returnvalue::FAILED;
-  }
-  *readVal = *(baseAddress + regOffset / ADRESS_DIVIDER);
-  result = mutex->unlockMutex();
-  if (result != returnvalue::OK) {
-    sif::warning << "AxiPtmeConfig::readReg: Failed to unlock mutex" << std::endl;
-    return returnvalue::FAILED;
-  }
-  return returnvalue::OK;
 }
 
-ReturnValue_t AxiPtmeConfig::writeBit(uint32_t regOffset, bool bitVal, BitPos bitPos) {
+void AxiPtmeConfig::writePollThreshold(AxiPtmeConfig::IdlePollThreshold pollThreshold) {
-  uint32_t readVal = 0;
+  uint32_t regVal = readCommonCfgReg();
-  ReturnValue_t result = readReg(regOffset, &readVal);
+  // Clear bits first
-  if (result != returnvalue::OK) {
+  regVal &= ~(0b111 << 3);
-    return result;
+  regVal |= (static_cast<uint8_t>(pollThreshold) << 3);
-  }
+  writeCommonCfgReg(regVal);
+}
+
+AxiPtmeConfig::IdlePollThreshold AxiPtmeConfig::readPollThreshold() {
+  uint32_t regVal = readCommonCfgReg();
+  return static_cast<AxiPtmeConfig::IdlePollThreshold>((regVal >> 3) & 0b111);
+}
+
+void AxiPtmeConfig::writeCommonCfgReg(uint32_t value) { writeReg(COMMON_CONFIG_REG, value); }
+uint32_t AxiPtmeConfig::readCommonCfgReg() { return readReg(COMMON_CONFIG_REG); }
+
+void AxiPtmeConfig::writeBit(uint32_t regOffset, bool bitVal, BitPos bitPos) {
+  uint32_t readVal = readReg(regOffset);
   uint32_t writeVal =
       (readVal & ~(1 << static_cast<uint32_t>(bitPos))) | bitVal << static_cast<uint32_t>(bitPos);
-  result = writeReg(regOffset, writeVal);
+  writeReg(regOffset, writeVal);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
 }

linux/ipcore/AxiPtmeConfig.h

@@ -14,6 +14,16 @@
  */
 class AxiPtmeConfig : public SystemObject {
  public:
+  enum IdlePollThreshold : uint8_t {
+    ALWAYS = 0b000,
+    POLL_1 = 0b001,
+    POLL_4 = 0b010,
+    POLL_16 = 0b011,
+    POLL_64 = 0b100,
+    POLL_256 = 0b101,
+    POLL_1024 = 0b110,
+    NEVER = 0b111
+  };
   /**
    * @brief   Constructor
    * @param axiUio    Device file of UIO belonging to the AXI configuration interface.
@@ -40,8 +50,8 @@ class AxiPtmeConfig : public SystemObject {
    *            Default: Enables TX clock manipulator
    *
    */
-  ReturnValue_t enableTxclockManipulator();
+  void enableTxclockManipulator();
-  ReturnValue_t disableTxclockManipulator();
+  void disableTxclockManipulator();
 
   /**
    * @brief The next to functions control whether data will be updated on the rising or falling edge
@@ -51,11 +61,14 @@ class AxiPtmeConfig : public SystemObject {
    *        Disable clock inversion. Data updated on rising edge.
    *        Default: Inversion is disabled
    */
-  ReturnValue_t enableTxclockInversion();
+  void enableTxclockInversion();
-  ReturnValue_t disableTxclockInversion();
+  void disableTxclockInversion();
 
-  ReturnValue_t enableBatPriorityBit();
+  void enableBatPriorityBit();
-  ReturnValue_t disableBatPriorityBit();
+  void disableBatPriorityBit();
+
+  void writePollThreshold(IdlePollThreshold pollThreshold);
+  IdlePollThreshold readPollThreshold();
 
  private:
   // Address of register storing the bitrate configuration parameter
@@ -80,7 +93,7 @@ class AxiPtmeConfig : public SystemObject {
    *
    * @param writeVal    Value to write
    */
-  ReturnValue_t writeReg(uint32_t regOffset, uint32_t writeVal);
+  void writeReg(uint32_t regOffset, uint32_t writeVal);
 
   /**
    * @brief Reads value from configuration register
@@ -88,7 +101,10 @@ class AxiPtmeConfig : public SystemObject {
    * @param regOffset   Offset of register from base address to read from
    * Qparam readVal     Pointer to variable where read value will be written to
    */
-  ReturnValue_t readReg(uint32_t regOffset, uint32_t* readVal);
+  uint32_t readReg(uint32_t regOffset);
+
+  uint32_t readCommonCfgReg();
+  void writeCommonCfgReg(uint32_t value);
 
   /**
    * @brief Sets one bit in a register
@@ -99,7 +115,7 @@ class AxiPtmeConfig : public SystemObject {
    *
    * @return             returnvalue::OK if successful, otherwise returnvalue::FAILED
    */
-  ReturnValue_t writeBit(uint32_t regOffset, bool bitVal, BitPos bitPos);
+  void writeBit(uint32_t regOffset, bool bitVal, BitPos bitPos);
 };
 
 #endif /* LINUX_OBC_AXIPTMECONFIG_H_ */

linux/ipcore/PapbVcInterface.cpp

@@ -2,6 +2,9 @@
 #include <linux/ipcore/PapbVcInterface.h>
 #include <unistd.h>
 
+#include <cstring>
+#include <ctime>
+
 #include "fsfw/serviceinterface/ServiceInterface.h"
 
 PapbVcInterface::PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbBusyId,
@@ -16,30 +19,71 @@ PapbVcInterface::~PapbVcInterface() {}
 
 ReturnValue_t PapbVcInterface::initialize() {
   UioMapper uioMapper(uioFile, mapNum);
-  uint32_t* baseReg;
+  ReturnValue_t result = uioMapper.getMappedAdress(const_cast<uint32_t**>(&vcBaseReg),
-  ReturnValue_t result = uioMapper.getMappedAdress(&baseReg, UioMapper::Permissions::WRITE_ONLY);
+                                                   UioMapper::Permissions::WRITE_ONLY);
   if (result != returnvalue::OK) {
     return result;
   }
-  vcBaseReg = baseReg;
   return returnvalue::OK;
 }
 
 ReturnValue_t PapbVcInterface::write(const uint8_t* data, size_t size) {
-  if (pollPapbBusySignal(0, 0) == returnvalue::OK) {
+  // There are no packets smaller than 4, this is considered a configuration error.
-    startPacketTransfer();
+  if (size < 4) {
+    return returnvalue::FAILED;
+  }
+  if (pollInterfaceReadiness(0, true) == returnvalue::OK) {
+    startPacketTransfer(ByteWidthCfg::ONE);
   } else {
     return DirectTmSinkIF::IS_BUSY;
   }
+  // TODO: This should work but does not.. :(
+  //  size_t idx = 0;
+  //  while (idx < size) {
+  //
+  //    nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
+  //    if ((size - idx) < 4) {
+  //      *vcBaseReg = CONFIG_DATA_INPUT | (size - idx - 1);
+  //      usleep(1);
+  //    }
+  //    if (pollPapbBusySignal(2) == returnvalue::OK) {
+  //      //      vcBaseReg + DATA_REG_OFFSET + 3 = static_cast<uint8_t>(data + idx);
+  //      //      vcBaseReg + DATA_REG_OFFSET + 2 = static_cast<uint8_t>(data + idx + 1);
+  //      //      vcBaseReg + DATA_REG_OFFSET + 1 = static_cast<uint8_t>(data + idx + 2);
+  //      //      vcBaseReg + DATA_REG_OFFSET = static_cast<uint8_t>(data + idx + 3);
+  //
+  //      // std::memcpy((vcBaseReg + DATA_REG_OFFSET), data + idx , nextWriteSize);
+  //      *(vcBaseReg + DATA_REG_OFFSET) = *reinterpret_cast<const uint32_t*>(data + idx);
+  //      //uint8_t* byteReg = reinterpret_cast<uint8_t*>(vcBaseReg + DATA_REG_OFFSET);
+  //
+  //      //byteReg[0] = data[idx];
+  //      //byteReg[1] = data[idx];
+  //    } else {
+  //      abortPacketTransfer();
+  //      return returnvalue::FAILED;
+  //    }
+  //    // TODO: Change this after the bugfix. Right now, the PAPB ignores the content of the byte
+  //    // width configuration.5
+  //    // It's okay to increment by a larger amount for the last segment here, loop will be over
+  //    // in any case.
+  //    idx += 4;
+  //  }
   for (size_t idx = 0; idx < size; idx++) {
-    if (pollPapbBusySignal(10, 10) == returnvalue::OK) {
+    // This delay is super-important, DO NOT REMOVE!
+    // Polling the GPIO or the config register too often messes up the scheduler.
+    // TODO: Maybe this should not be done like this. It would be better if there was a custom
+    // FPGA module which can accept packets and then takes care of dumping that packet into
+    // the PTME. DMA would be an ideal solution for this.
+    nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
+    if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
       *(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
     } else {
       abortPacketTransfer();
       return returnvalue::FAILED;
     }
   }
-  if (pollPapbBusySignal(10, 10) == returnvalue::OK) {
+  nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
+  if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
     completePacketTransfer();
   } else {
     abortPacketTransfer();
@@ -48,34 +92,41 @@ ReturnValue_t PapbVcInterface::write(const uint8_t* data, size_t size) {
   return returnvalue::OK;
 }
 
-void PapbVcInterface::startPacketTransfer() { *vcBaseReg = CONFIG_START; }
+void PapbVcInterface::startPacketTransfer(ByteWidthCfg initWidth) {
+  *vcBaseReg = CONFIG_DATA_INPUT | initWidth;
+}
 
 void PapbVcInterface::completePacketTransfer() { *vcBaseReg = CONFIG_END; }
 
-ReturnValue_t PapbVcInterface::pollPapbBusySignal(uint32_t maxPollRetries,
+ReturnValue_t PapbVcInterface::pollInterfaceReadiness(uint32_t maxPollRetries,
-                                                  uint32_t retryDelayUs) const {
+                                                      bool checkReadyState) const {
-  gpio::Levels papbBusyState = gpio::Levels::LOW;
-  ReturnValue_t result;
   uint32_t busyIdx = 0;
+  nextDelay.tv_nsec = FIRST_DELAY_PAPB_POLLING_NS;
 
   while (true) {
-    /** Check if PAPB interface is ready to receive data */
+    // Check if PAPB interface is ready to receive data. Use the configuration register for this.
-    result = gpioComIF->readGpio(papbBusyId, papbBusyState);
+    // Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
-    if (result != returnvalue::OK) {
+    uint32_t reg = *vcBaseReg;
-      sif::warning << "PapbVcInterface::pollPapbBusySignal: Failed to read papb busy signal"
+    bool busy = (reg >> 5) & 0b1;
-                   << std::endl;
+    bool ready = (reg >> 6) & 0b1;
-      return returnvalue::FAILED;
+    if (not busy) {
-    }
-    if (papbBusyState == gpio::Levels::HIGH) {
       return returnvalue::OK;
     }
+    if (checkReadyState and not ready) {
+      return PAPB_BUSY;
+    }
 
     busyIdx++;
     if (busyIdx >= maxPollRetries) {
       return PAPB_BUSY;
     }
 
-    usleep(retryDelayUs);
+    // Ignore signal handling here for now.
+    nanosleep(&nextDelay, &remDelay);
+    // Adaptive delay.
+    if (nextDelay.tv_nsec * 2 <= MAX_DELAY_PAPB_POLLING_NS) {
+      nextDelay.tv_nsec *= 2;
+    }
   }
   return returnvalue::OK;
 }
@@ -100,7 +151,7 @@ void PapbVcInterface::isVcInterfaceBufferEmpty() {
   return;
 }
 
-bool PapbVcInterface::isBusy() const { return pollPapbBusySignal(0, 0) == PAPB_BUSY; }
+bool PapbVcInterface::isBusy() const { return pollInterfaceReadiness(0, true) == PAPB_BUSY; }
 
 void PapbVcInterface::cancelTransfer() { abortPacketTransfer(); }
 

linux/ipcore/PapbVcInterface.h

@@ -5,6 +5,8 @@
 #include <fsfw_hal/linux/gpio/LinuxLibgpioIF.h>
 #include <linux/ipcore/VirtualChannelIF.h>
 
+#include <atomic>
+
 #include "OBSWConfig.h"
 #include "fsfw/returnvalues/returnvalue.h"
 
@@ -50,13 +52,14 @@ class PapbVcInterface : public VirtualChannelIF {
 
   static const ReturnValue_t PAPB_BUSY = MAKE_RETURN_CODE(0xA0);
 
+  enum ByteWidthCfg : uint32_t { ONE = 0b00, TWO = 0b01, THREE = 0b10, FOUR = 0b11 };
   /**
    * Configuration bits:
    * bit[1:0]: Size of data (1,2,3 or 4 bytes). 1 Byte <=> b00
    * bit[2]: Set this bit to 1 to abort a transferred packet
    * bit[3]: Signals to VcInterface the start of a new telemetry packet
    */
-  static constexpr uint32_t CONFIG_START = 0b00001000;
+  static constexpr uint32_t CONFIG_DATA_INPUT = 0b00001000;
 
   /**
    * Abort a transferred packet.
@@ -76,6 +79,9 @@ class PapbVcInterface : public VirtualChannelIF {
    */
   static const int DATA_REG_OFFSET = 256;
 
+  static constexpr long int FIRST_DELAY_PAPB_POLLING_NS = 10;
+  static constexpr long int MAX_DELAY_PAPB_POLLING_NS = 40;
+
   LinuxLibgpioIF* gpioComIF = nullptr;
 
   /** Pulled to low when virtual channel not ready to receive data */
@@ -85,6 +91,9 @@ class PapbVcInterface : public VirtualChannelIF {
 
   std::string uioFile;
   int mapNum = 0;
+  mutable struct timespec nextDelay = {.tv_sec = 0, .tv_nsec = 0};
+  const struct timespec BETWEEN_POLL_DELAY = {.tv_sec = 0, .tv_nsec = 10};
+  mutable struct timespec remDelay;
 
   volatile uint32_t* vcBaseReg = nullptr;
 
@@ -94,7 +103,7 @@ class PapbVcInterface : public VirtualChannelIF {
    * @brief   This function sends the config byte to the virtual channel of the PTME IP Core
    *          to initiate a packet transfer.
    */
-  void startPacketTransfer();
+  void startPacketTransfer(ByteWidthCfg initWidth);
 
   void abortPacketTransfer();
 
@@ -111,7 +120,7 @@ class PapbVcInterface : public VirtualChannelIF {
    *
    * @return  returnvalue::OK when ready to receive data else PAPB_BUSY.
    */
-  ReturnValue_t pollPapbBusySignal(uint32_t maxPollRetries, uint32_t retryDelayUs) const;
+  inline ReturnValue_t pollInterfaceReadiness(uint32_t maxPollRetries, bool checkReadyState) const;
 
   /**
    * @brief   This function can be used for debugging to check whether there are packets in