splitting pdu1 and pdu2 sets done

common/config/devices/powerSwitcherList.h

@@ -1,72 +1,6 @@
 #ifndef FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
 #define FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
 
-#include "OBSWConfig.h"
-
-#include <fsfw/power/definitions.h>
-
-#include <array>
-#include <cstdint>
-
-namespace pcduSwitches {
-
-/* Switches are uint8_t datatype and go from 0 to 255 */
-enum Switches: power::Switch_t {
-  PDU1_CH0_TCS_BOARD_3V3,
-  PDU1_CH1_SYRLINKS_12V,
-  PDU1_CH2_STAR_TRACKER_5V,
-  PDU1_CH3_MGT_5V,
-  PDU1_CH4_SUS_NOMINAL_3V3,
-  PDU1_CH5_SOLAR_CELL_EXP_5V,
-  PDU1_CH6_PLOC_12V,
-  PDU1_CH7_ACS_A_SIDE_3V3,
-  PDU1_CH8_UNOCCUPIED,
-
-  PDU2_CH0_Q7S,
-  PDU2_CH1_PL_PCDU_BATT_0_14V8,
-  PDU2_CH2_RW_5V,
-  PDU2_CH3_TCS_BOARD_HEATER_IN_8V,
-  PDU2_CH4_SUS_REDUNDANT_3V3,
-  PDU2_CH5_DEPLOYMENT_MECHANISM_8V,
-  PDU2_CH6_PL_PCDU_BATT_1_14V8,
-  PDU2_CH7_ACS_BOARD_SIDE_B_3V3,
-  PDU2_CH8_PAYLOAD_CAMERA,
-  NUMBER_OF_SWITCHES
-};
-
-static const uint8_t ON = 1;
-static const uint8_t OFF = 0;
-
-// Output states after reboot of the PDUs
-
-const std::array<uint8_t, NUMBER_OF_SWITCHES> INIT_SWITCH_STATES = {
-    // PDU 1
-// Because the TE0720 is not connected to the PCDU, this switch is always on
-#ifdef TE0720_1CFA
-    ON,
-#else
-    OFF,
-#endif
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-
-    // PDU 2
-    ON,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF,
-    OFF
-};
-}
+#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
 
 #endif /* FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_ */