Merge branch 'main' into gps-changes

2023-08-07 16:58:46 +02:00 · 2023-08-07 16:58:46 +02:00 · 99dbab9311
commit 99dbab9311
parent 8441c49fe6 b2d9582a46
12 changed files with 137 additions and 84 deletions
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -16,6 +16,8 @@ will consitute of a breaking change warranting a new major release:

 # [unreleased]

+# [v6.3.0] 2023-08-03
+
 ## Fixed

 - Small SCEX fix: The temperatur check option was not passed
@ -24,16 +26,26 @@ will consitute of a breaking change warranting a new major release:
 - ACS Controller strategy is now actually written to the dataset for detumbling.
 - During detumble the fused rotation rate is now calculated.
 - Detumbling is now exited when its exit value is undercut and not its entry value.
+- Rotation rate of last cycle is now stored in all cases for the fused rotational rate
+  calculation.
+- Fused rotation rate estimation during eclipse can be disabled. This will also prevent
+  detumbling during eclipse, as no relevant rotational rate is available for now.
 - `EiveSystem`: Add a small delay between triggering an event for FDIR reboots and sending the
  command to the core controller.
+- PL PDU: Fixed bounds checking logic. Bound checks will only be performed for modules which are
+  enabled.

 ## Changed

 - SCEX: Only perform filesystem checks when not in OFF mode.
 - The `EiveSystem` now only sends reboot commands targetting the same image.
+- Added 200 ms delay between switching HPA/MPA/TX/X8 and DRO GPIO pin OFF.
+- PL PCDU ADC set is now automatically enabled for `NORMAL` mode transitions. It is automatically
+  disabled for `OFF` mode transitions.

 ## Added

+- PL PCDU for EM build.
 - SCEX: Add warning event if filesystem is unusable.

 # [v6.2.0] 2023-07-26
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@ -10,7 +10,7 @@
 cmake_minimum_required(VERSION 3.13)

 set(OBSW_VERSION_MAJOR 6)
-set(OBSW_VERSION_MINOR 2)
+set(OBSW_VERSION_MINOR 3)
 set(OBSW_VERSION_REVISION 0)

 # set(CMAKE_VERBOSE TRUE)
@ -144,7 +144,7 @@ set(OBSW_ADD_RAD_SENSORS
    ${INIT_VAL}
    CACHE STRING "Add Rad Sensor module")
 set(OBSW_ADD_PL_PCDU
-    ${INIT_VAL}
+    1
    CACHE STRING "Add Payload PCDU modukle")
 set(OBSW_ADD_SYRLINKS
    1
--- a/bsp_q7s/em/emObjectFactory.cpp
+++ b/bsp_q7s/em/emObjectFactory.cpp
@ -94,6 +94,9 @@ void ObjectFactory::produce(void* args) {
 #if OBSW_ADD_ACS_BOARD == 1
  dummyCfg.addAcsBoardDummies = false;
 #endif
+#if OBSW_ADD_PL_PCDU == 0
+  dummyCfg.addPlPcduDummy = true;
+#endif

  PowerSwitchIF* pwrSwitcher = nullptr;
 #if OBSW_ADD_GOMSPACE_PCDU == 0
@ -107,6 +110,8 @@ void ObjectFactory::produce(void* args) {

  new CoreController(objects::CORE_CONTROLLER, enableHkSets);

+  auto* stackHandler = new Stack5VHandler(*pwrSwitcher);
+
  // Initialize chip select to avoid SPI bus issues.
  createRadSensorChipSelect(gpioComIF);

@ -146,6 +151,9 @@ void ObjectFactory::produce(void* args) {
  createStrComponents(pwrSwitcher);
 #endif /* OBSW_ADD_STAR_TRACKER == 1 */

+#if OBSW_ADD_PL_PCDU == 1
+  createPlPcduComponents(gpioComIF, spiMainComIF, pwrSwitcher, *stackHandler);
+#endif
  createPayloadComponents(gpioComIF, *pwrSwitcher);

 #if OBSW_ADD_CCSDS_IP_CORES == 1
--- a/bsp_q7s/fmObjectFactory.cpp
+++ b/bsp_q7s/fmObjectFactory.cpp
@ -81,7 +81,9 @@ void ObjectFactory::produce(void* args) {
  createTmpComponents(tmpDevsToAdd);
 #endif
  createSolarArrayDeploymentComponents(*pwrSwitcher, *gpioComIF);
+#if OBSW_ADD_PL_PCDU == 1
  createPlPcduComponents(gpioComIF, spiMainComIF, pwrSwitcher, *stackHandler);
+#endif
 #if OBSW_ADD_SYRLINKS == 1
  createSyrlinksComponents(pwrSwitcher);
 #endif /* OBSW_ADD_SYRLINKS == 1 */
--- a/bsp_q7s/objectFactory.cpp
+++ b/bsp_q7s/objectFactory.cpp
@ -902,8 +902,6 @@ void ObjectFactory::createPlPcduComponents(LinuxLibgpioIF* gpioComIF, SpiComIF*
      new PayloadPcduHandler(objects::PLPCDU_HANDLER, objects::SPI_MAIN_COM_IF, spiCookie,
                             gpioComIF, SdCardManager::instance(), stackHandler, false);
  spiCookie->setCallbackMode(PayloadPcduHandler::extConvAsTwoCallback, plPcduHandler);
-//  plPcduHandler->enablePeriodicPrintout(true, 5);
-//  static_cast<void>(plPcduHandler);
 #if OBSW_TEST_PL_PCDU == 1
  plPcduHandler->setStartUpImmediately();
 #endif
--- a/dummies/helperFactory.cpp
+++ b/dummies/helperFactory.cpp
@ -248,9 +248,11 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
    auto* scexDummy = new ScexDummy(objects::SCEX, objects::DUMMY_COM_IF, comCookieDummy);
    scexDummy->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
  }
+  if (cfg.addPlPcduDummy) {
    auto* plPcduDummy =
        new PlPcduDummy(objects::PLPCDU_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
    plPcduDummy->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
+  }
  if (cfg.addPlocDummies) {
    auto* plocMpsocDummy =
        new PlocMpsocDummy(objects::PLOC_MPSOC_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
--- a/dummies/helperFactory.h
+++ b/dummies/helperFactory.h
@ -30,6 +30,7 @@ struct DummyCfg {
  bool addStrDummy = true;
  bool addTmpDummies = true;
  bool addRadSensorDummy = true;
+  bool addPlPcduDummy = false;
  Tmp1075Cfg tmp1075Cfg;
  bool addCamSwitcherDummy = false;
  bool addScexDummy = false;
--- a/mission/controller/acs/AcsParameters.cpp
+++ b/mission/controller/acs/AcsParameters.cpp
@ -26,6 +26,9 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
        case 0x1:
          parameterWrapper->set(onBoardParams.mekfViolationTimer);
          break;
+        case 0x2:
+          parameterWrapper->set(onBoardParams.fusedRateSafeDuringEclipse);
+          break;
        default:
          return INVALID_IDENTIFIER_ID;
      }
--- a/mission/controller/acs/AcsParameters.h
+++ b/mission/controller/acs/AcsParameters.h
@ -19,6 +19,7 @@ class AcsParameters : public HasParametersIF {
  struct OnBoardParams {
    double sampleTime = 0.4;  // [s]
    uint16_t mekfViolationTimer = 750;
+    uint8_t fusedRateSafeDuringEclipse = true;
  } onBoardParams;

  struct InertiaEIVE {
--- a/mission/controller/acs/FusedRotationEstimation.cpp
+++ b/mission/controller/acs/FusedRotationEstimation.cpp
@ -18,10 +18,18 @@ void FusedRotationEstimation::estimateFusedRotationRateSafe(
      std::memcpy(fusedRotRateData->rotRateTotal.value, ZERO_VEC, 3 * sizeof(double));
      fusedRotRateData->setValidity(false, true);
    }
+    // store for calculation of angular acceleration
+    if (gyrDataProcessed->gyrVecTot.isValid()) {
+      std::memcpy(rotRateOldB, gyrDataProcessed->gyrVecTot.value, 3 * sizeof(double));
+    }
    return;
  }
  if (not susDataProcessed->susVecTot.isValid()) {
    estimateFusedRotationRateEclipse(gyrDataProcessed, fusedRotRateData);
+    // store for calculation of angular acceleration
+    if (gyrDataProcessed->gyrVecTot.isValid()) {
+      std::memcpy(rotRateOldB, gyrDataProcessed->gyrVecTot.value, 3 * sizeof(double));
+    }
    return;
  }

@ -42,6 +50,10 @@ void FusedRotationEstimation::estimateFusedRotationRateSafe(
                                        fusedRotRateParallel, 3);
  } else {
    estimateFusedRotationRateEclipse(gyrDataProcessed, fusedRotRateData);
+    // store for calculation of angular acceleration
+    if (gyrDataProcessed->gyrVecTot.isValid()) {
+      std::memcpy(rotRateOldB, gyrDataProcessed->gyrVecTot.value, 3 * sizeof(double));
+    }
    return;
  }

@ -58,11 +70,6 @@ void FusedRotationEstimation::estimateFusedRotationRateSafe(
  double fusedRotRateTotal[3] = {0, 0, 0};
  VectorOperations<double>::add(fusedRotRateParallel, fusedRotRateOrthogonal, fusedRotRateTotal);

-  // store for calculation of angular acceleration
-  if (gyrDataProcessed->gyrVecTot.isValid()) {
-    std::memcpy(rotRateOldB, gyrDataProcessed->gyrVecTot.value, 3 * sizeof(double));
-  }
-
  {
    PoolReadGuard pg(fusedRotRateData);
    std::memcpy(fusedRotRateData->rotRateOrthogonal.value, fusedRotRateOrthogonal,
@ -71,11 +78,17 @@ void FusedRotationEstimation::estimateFusedRotationRateSafe(
    std::memcpy(fusedRotRateData->rotRateTotal.value, fusedRotRateTotal, 3 * sizeof(double));
    fusedRotRateData->setValidity(true, true);
  }
+
+  // store for calculation of angular acceleration
+  if (gyrDataProcessed->gyrVecTot.isValid()) {
+    std::memcpy(rotRateOldB, gyrDataProcessed->gyrVecTot.value, 3 * sizeof(double));
+  }
 }

 void FusedRotationEstimation::estimateFusedRotationRateEclipse(
    acsctrl::GyrDataProcessed *gyrDataProcessed, acsctrl::FusedRotRateData *fusedRotRateData) {
-  if (not gyrDataProcessed->gyrVecTot.isValid() or
+  if (not acsParameters->onBoardParams.fusedRateSafeDuringEclipse or
+      not gyrDataProcessed->gyrVecTot.isValid() or
      VectorOperations<double>::norm(fusedRotRateData->rotRateTotal.value, 3) == 0) {
    {
      PoolReadGuard pg(fusedRotRateData);
--- a/mission/payload/PayloadPcduHandler.cpp
+++ b/mission/payload/PayloadPcduHandler.cpp
@ -1,7 +1,9 @@
-#include <fsfw/src/fsfw/datapool/PoolReadGuard.h>
+#include <fsfw/datapool/PoolReadGuard.h>
+#include <fsfw/tasks/TaskFactory.h>
 #include <mission/payload/PayloadPcduHandler.h>

 #include "OBSWConfig.h"
+#include "fsfw/thermal/tcsDefinitions.h"

 #ifdef XIPHOS_Q7S
 #include <fsfw_hal/linux/UnixFileGuard.h>
@ -64,6 +66,16 @@ void PayloadPcduHandler::doShutDown() {
    return;
  }
  state = States::PL_PCDU_OFF;
+  quickTransitionAlreadyCalled = false;
+  {
+    PoolReadGuard pg(&adcSet);
+    adcSet.setReportingEnabled(false);
+    adcSet.tempC = thermal::INVALID_TEMPERATURE;
+
+    std::memset(adcSet.channels.value, 0, sizeof(adcSet.channels.value));
+    std::memset(adcSet.processed.value, 0, sizeof(adcSet.processed.value));
+    adcSet.setValidity(false, true);
+  }
  // No need to set mode _MODE_POWER_DOWN, power switching was already handled
  setMode(MODE_OFF);
 }
@ -73,14 +85,7 @@ void PayloadPcduHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
    stateMachineToNormal(modeFrom, subModeFrom);
    return;
  } else if (getMode() == _MODE_TO_ON and modeFrom == MODE_NORMAL) {
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_HPA);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_MPA);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_TX);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_X8);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_DRO);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_TX);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_VBAT0);
-    gpioIF->pullLow(gpioIds::PLPCDU_ENB_VBAT1);
+    pullAllGpiosLow(200);
    state = States::STACK_5V_CORRECT;
  }
  DeviceHandlerBase::doTransition(modeFrom, subModeFrom);
@ -89,6 +94,11 @@ void PayloadPcduHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
 ReturnValue_t PayloadPcduHandler::stateMachineToNormal(Mode_t modeFrom, Submode_t subModeFrom) {
  using namespace plpcdu;
  bool doFinish = true;
+  if (toNormalOneShot) {
+    PoolReadGuard pg(&adcSet);
+    adcSet.setReportingEnabled(true);
+    toNormalOneShot = false;
+  }
  if (((getSubmode() >> SOLID_STATE_RELAYS_ADC_ON) & 0b1) == 1) {
    if (state == States::PL_PCDU_OFF) {
      sif::error << "PayloadPcduHandler::stateMachineToNormal: Unexpected state PL_PCDU_OFF"
@ -114,23 +124,23 @@ ReturnValue_t PayloadPcduHandler::stateMachineToNormal(Mode_t modeFrom, Submode_
        state = States::ON_TRANS_ADC_CLOSE_ZERO;
        adcCountdown.setTimeout(50);
        adcCountdown.resetTimer();
-        adcState = AdcStates::BOOT_DELAY;
+        adcState = AdcState::BOOT_DELAY;
        doFinish = false;
        // If the values are not close to zero, we should not allow transition
        monMode = MonitoringMode::CLOSE_TO_ZERO;
      }
    }
    if (state == States::ON_TRANS_ADC_CLOSE_ZERO) {
-      if (adcState == AdcStates::BOOT_DELAY) {
+      if (adcState == AdcState::BOOT_DELAY) {
        doFinish = false;
        if (adcCountdown.hasTimedOut()) {
-          adcState = AdcStates::SEND_SETUP;
+          adcState = AdcState::SEND_SETUP;
          adcCmdExecuted = false;
        }
      }
-      if (adcState == AdcStates::SEND_SETUP) {
+      if (adcState == AdcState::SEND_SETUP) {
        if (adcCmdExecuted) {
-          adcState = AdcStates::NORMAL;
+          adcState = AdcState::NORMAL;
          doFinish = true;
          adcCountdown.setTimeout(100);
          adcCountdown.resetTimer();
@ -167,6 +177,7 @@ ReturnValue_t PayloadPcduHandler::stateMachineToNormal(Mode_t modeFrom, Submode_
  switchHandler(MPA_ON, gpioIds::PLPCDU_ENB_MPA, "MPA");
  switchHandler(HPA_ON, gpioIds::PLPCDU_ENB_HPA, "HPA");
  if (doFinish) {
+    toNormalOneShot = true;
    setMode(MODE_NORMAL);
  }
  return returnvalue::OK;
@ -174,11 +185,11 @@ ReturnValue_t PayloadPcduHandler::stateMachineToNormal(Mode_t modeFrom, Submode_

 ReturnValue_t PayloadPcduHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
  switch (adcState) {
-    case (AdcStates::SEND_SETUP): {
+    case (AdcState::SEND_SETUP): {
      *id = plpcdu::SETUP_CMD;
      return buildCommandFromCommand(*id, nullptr, 0);
    }
-    case (AdcStates::NORMAL): {
+    case (AdcState::NORMAL): {
      *id = plpcdu::READ_WITH_TEMP_EXT;
      return buildCommandFromCommand(*id, nullptr, 0);
    }
@ -190,7 +201,7 @@ ReturnValue_t PayloadPcduHandler::buildNormalDeviceCommand(DeviceCommandId_t* id
 }

 ReturnValue_t PayloadPcduHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
-  if (adcState == AdcStates::SEND_SETUP) {
+  if (adcState == AdcState::SEND_SETUP) {
    *id = plpcdu::SETUP_CMD;
    return buildCommandFromCommand(*id, nullptr, 0);
  }
@ -211,9 +222,9 @@ void PayloadPcduHandler::updateSwitchGpio(gpioId_t id, gpio::Levels level) {
 }

 void PayloadPcduHandler::fillCommandAndReplyMap() {
-  insertInCommandAndReplyMap(plpcdu::READ_CMD, 2, &adcSet);
-  insertInCommandAndReplyMap(plpcdu::READ_TEMP_EXT, 1, &adcSet);
-  insertInCommandAndReplyMap(plpcdu::READ_WITH_TEMP_EXT, 1, &adcSet);
+  insertInCommandAndReplyMap(plpcdu::READ_CMD, 2);
+  insertInCommandAndReplyMap(plpcdu::READ_TEMP_EXT, 1);
+  insertInCommandAndReplyMap(plpcdu::READ_WITH_TEMP_EXT, 1);
  insertInCommandAndReplyMap(plpcdu::SETUP_CMD, 1);
 }

@ -277,6 +288,7 @@ ReturnValue_t PayloadPcduHandler::interpretDeviceReply(DeviceCommandId_t id,
      break;
    }
    case (READ_CMD): {
+      {
        PoolReadGuard pg(&adcSet);
        if (pg.getReadResult() != returnvalue::OK) {
          return pg.getReadResult();
@ -284,10 +296,12 @@ ReturnValue_t PayloadPcduHandler::interpretDeviceReply(DeviceCommandId_t id,
        handleExtConvRead(packet);
        checkAdcValues();
        adcSet.setValidity(true, true);
+      }
      handlePrintout();
      break;
    }
    case (READ_WITH_TEMP_EXT): {
+      {
        PoolReadGuard pg(&adcSet);
        if (pg.getReadResult() != returnvalue::OK) {
          return pg.getReadResult();
@ -298,6 +312,7 @@ ReturnValue_t PayloadPcduHandler::interpretDeviceReply(DeviceCommandId_t id,
            max1227::getTemperature(packet[tempStartIdx] << 8 | packet[tempStartIdx + 1]);
        checkAdcValues();
        adcSet.setValidity(true, true);
+      }
      handlePrintout();
      break;
    }
@ -367,16 +382,9 @@ void PayloadPcduHandler::enablePeriodicPrintout(bool enable, uint8_t divider) {

 void PayloadPcduHandler::quickTransitionBackToOff(bool startTransitionToOff, bool notifyFdir) {
  States currentState = state;
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_HPA);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_MPA);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_TX);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_X8);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_DRO);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_TX);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_VBAT0);
-  gpioIF->pullLow(gpioIds::PLPCDU_ENB_VBAT1);
+  pullAllGpiosLow(200);
  state = States::STACK_5V_SWITCHING;
-  adcState = AdcStates::OFF;
+  adcState = AdcState::OFF;
  if (startTransitionToOff) {
    startTransition(MODE_OFF, 0);
  }
@ -405,10 +413,13 @@ void PayloadPcduHandler::checkAdcValues() {
  adcSet.processed[U_DRO_DIV_6] = static_cast<float>(adcSet.channels[11]) * SCALE_VOLTAGE;
  float lowerBound = 0.0;
  float upperBound = 0.0;
-  bool adcTransition = false;
-  adcTransition = state == States::ON_TRANS_DRO and adcCountdown.isBusy();
-  // Now check against voltage and current limits, depending on state
-  if (state >= States::ON_TRANS_DRO and not adcTransition) {
+  bool adcTransition = adcState == AdcState::NORMAL and adcCountdown.isBusy();
+  if (NO_ADC_CHECKS or adcTransition) {
+    return;
+  }
+  // Now check against voltage and current limits.
+  uint8_t submode = getSubmode();
+  if (((submode >> NormalSubmodeBits::DRO_ON) & 0b1) == 0b1) {
    if (ssrToDroInjectionRequested) {
      handleFailureInjection("SSR to DRO", NEG_V_OUT_OF_BOUNDS);
      ssrToDroInjectionRequested = false;
@ -435,8 +446,7 @@ void PayloadPcduHandler::checkAdcValues() {
      return;
    }
  }
-  adcTransition = state == States::ON_TRANS_X8 and adcCountdown.isBusy();
-  if (state >= States::ON_TRANS_X8 and not adcTransition) {
+  if (((submode >> NormalSubmodeBits::X8_ON) & 0b1) == 0b1) {
    if (droToX8InjectionRequested) {
      handleFailureInjection("X8 to TX", U_X8_OUT_OF_BOUNDS);
      droToX8InjectionRequested = false;
@ -453,8 +463,7 @@ void PayloadPcduHandler::checkAdcValues() {
      return;
    }
  }
-  adcTransition = state == States::ON_TRANS_TX and adcCountdown.isBusy();
-  if (state >= States::ON_TRANS_TX and not adcTransition) {
+  if (((submode >> NormalSubmodeBits::TX_ON) & 0b1) == 0b1) {
    if (txToMpaInjectionRequested) {
      handleFailureInjection("TX to MPA", U_TX_OUT_OF_BOUNDS);
      txToMpaInjectionRequested = false;
@ -471,8 +480,7 @@ void PayloadPcduHandler::checkAdcValues() {
      return;
    }
  }
-  adcTransition = state == States::ON_TRANS_MPA and adcCountdown.isBusy();
-  if (state >= States::ON_TRANS_MPA and not adcTransition) {
+  if (((submode >> NormalSubmodeBits::MPA_ON) & 0b1) == 0b1) {
    if (mpaToHpaInjectionRequested) {
      handleFailureInjection("MPA to HPA", U_HPA_OUT_OF_BOUNDS);
      mpaToHpaInjectionRequested = false;
@ -489,8 +497,7 @@ void PayloadPcduHandler::checkAdcValues() {
      return;
    }
  }
-  adcTransition = state == States::ON_TRANS_HPA and adcCountdown.isBusy();
-  if (state >= States::ON_TRANS_HPA and not adcTransition) {
+  if (((submode >> NormalSubmodeBits::HPA_ON) & 0b1) == 0b1) {
    if (allOnInjectRequested) {
      handleFailureInjection("All On", U_HPA_OUT_OF_BOUNDS);
      allOnInjectRequested = false;
@ -677,6 +684,18 @@ void PayloadPcduHandler::handleFailureInjection(std::string output, Event event)
  droToX8InjectionRequested = false;
 }

+void PayloadPcduHandler::pullAllGpiosLow(uint32_t delayBeforeSwitchingOffDro) {
+  sif::info << "Pulling all PL PCDU GPIOs to low" << std::endl;
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_HPA);
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_MPA);
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_TX);
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_X8);
+  TaskFactory::delayTask(delayBeforeSwitchingOffDro);
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_DRO);
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_VBAT0);
+  gpioIF->pullLow(gpioIds::PLPCDU_ENB_VBAT1);
+}
+
 ReturnValue_t PayloadPcduHandler::handleDoubleParamUpdate(std::string key,
                                                          ParameterWrapper* parameterWrapper,
                                                          const ParameterWrapper* newValues) {
@ -692,6 +711,8 @@ ReturnValue_t PayloadPcduHandler::handleDoubleParamUpdate(std::string key,
  return params.writeJsonFile();
 }

+LocalPoolDataSetBase* PayloadPcduHandler::getDataSetHandle(sid_t sid) { return &adcSet; }
+
 #ifdef XIPHOS_Q7S
 ReturnValue_t PayloadPcduHandler::extConvAsTwoCallback(SpiComIF* comIf, SpiCookie* cookie,
                                                       const uint8_t* sendData, size_t sendLen,
--- a/mission/payload/PayloadPcduHandler.h
+++ b/mission/payload/PayloadPcduHandler.h
@ -76,6 +76,8 @@ class PayloadPcduHandler : public DeviceHandlerBase {
 #endif

 private:
+  static constexpr bool NO_ADC_CHECKS = false;
+
  enum class States : uint8_t {
    PL_PCDU_OFF,
    STACK_5V_SWITCHING,
@ -84,20 +86,7 @@ class PayloadPcduHandler : public DeviceHandlerBase {
    // Solid State Relay, enable battery voltages VBAT0 and VBAT1. This will also switch on
    // the ADC
    ON_TRANS_SSR,
-    ON_TRANS_ADC_CLOSE_ZERO,
-    // Enable Dielectric Resonant Oscillator and start monitoring voltages as
-    // soon as DRO voltage reaches 6V
-    ON_TRANS_DRO,
-    // Switch on X8 compoennt and monitor voltages for 5 seconds
-    ON_TRANS_X8,
-    // Switch on TX component and monitor voltages for 5 seconds
-    ON_TRANS_TX,
-    // Switch on MPA component and monitor voltages for 5 seconds
-    ON_TRANS_MPA,
-    // Switch on HPA component and monitor voltages for 5 seconds
-    ON_TRANS_HPA,
-    // All components of the experiment are on
-    PL_PCDU_ON,
+    ON_TRANS_ADC_CLOSE_ZERO
  } state = States::PL_PCDU_OFF;

  duallane::Submodes pwrSubmode = duallane::Submodes::A_SIDE;
@ -106,7 +95,7 @@ class PayloadPcduHandler : public DeviceHandlerBase {

  enum class MonitoringMode { NONE, CLOSE_TO_ZERO, NEGATIVE } monMode = MonitoringMode::NONE;

-  enum class AdcStates { OFF, BOOT_DELAY, SEND_SETUP, NORMAL } adcState = AdcStates::OFF;
+  enum class AdcState { OFF, BOOT_DELAY, SEND_SETUP, NORMAL } adcState = AdcState::OFF;

  bool goToNormalMode = false;
  plpcdu::PlPcduAdcSet adcSet;
@ -128,6 +117,7 @@ class PayloadPcduHandler : public DeviceHandlerBase {
  bool mpaToHpaInjectionRequested = false;
  bool allOnInjectRequested = false;
  bool clearSetOnOffFlag = true;
+  bool toNormalOneShot = true;

  PeriodicOperationDivider opDivider = PeriodicOperationDivider(5);
  uint8_t tempReadDivisor = 1;
@ -168,6 +158,7 @@ class PayloadPcduHandler : public DeviceHandlerBase {

  void handleExtConvRead(const uint8_t* bufStart);
  void handlePrintout();
+  void pullAllGpiosLow(uint32_t delayBeforeSwitchingOffDro);
  void checkAdcValues();
  void handleOutOfBoundsPrintout();
  void checkJsonFileInit();
@ -178,6 +169,7 @@ class PayloadPcduHandler : public DeviceHandlerBase {
  ReturnValue_t serializeFloat(uint32_t& param, float val);
  ReturnValue_t handleDoubleParamUpdate(std::string key, ParameterWrapper* parameterWrapper,
                                        const ParameterWrapper* newValues);
+  LocalPoolDataSetBase* getDataSetHandle(sid_t sid) override;
 };

 #endif /* LINUX_DEVICES_PLPCDUHANDLER_H_ */