Merge pull request 'More buffer time' (#433) from bugfix_imtq_timing into develop
All checks were successful
EIVE/eive-obsw/pipeline/head This commit looks good

Reviewed-on: #433
This commit is contained in:
Robin Müller 2023-03-06 11:33:39 +01:00
commit acae88c67c
6 changed files with 91 additions and 60 deletions

View File

@ -59,7 +59,7 @@ namespace spiSched {
static constexpr uint32_t SCHED_BLOCK_1_SUS_READ_MS = 15;
static constexpr uint32_t SCHED_BLOCK_2_SENSOR_READ_MS = 30;
static constexpr uint32_t SCHED_BLOCK_3_READ_IMTQ_MGM_MS = 42;
static constexpr uint32_t SCHED_BLOCK_3_READ_IMTQ_MGM_MS = 43;
static constexpr uint32_t SCHED_BLOCK_4_ACS_CTRL_MS = 45;
static constexpr uint32_t SCHED_BLOCK_5_ACTUATOR_MS = 55;
static constexpr uint32_t SCHED_BLOCK_6_IMTQ_BLOCK_2_MS = 105;

View File

@ -28,6 +28,8 @@ ReturnValue_t ImtqPollingTask::performOperation(uint8_t operationCode) {
// Stopwatch watch;
switch (currentRequest) {
case imtq::RequestType::MEASURE_NO_ACTUATION: {
// Measured to take 24 ms for debug and release builds.
// Stopwatch watch;
handleMeasureStep();
break;
}
@ -47,6 +49,9 @@ void ImtqPollingTask::handleMeasureStep() {
size_t replyLen = 0;
uint8_t* replyPtr;
ImtqRepliesDefault replies(replyBuf.data());
// If some startup handling is added later, set configured after it was done once.
replies.setConfigured();
// Can be used later to verify correct timing (e.g. all data has been read)
clearReadFlagsDefault(replies);
auto i2cCmdExecMeasure = [&](imtq::CC::CC cc) {
@ -127,17 +132,12 @@ void ImtqPollingTask::handleMeasureStep() {
if (i2cCmdExecMeasure(imtq::CC::GET_RAW_MTM_MEASUREMENT) != returnvalue::OK) {
return;
}
bool mgmMeasurementTooOld = false;
// See p.39 of the iMTQ user manual. If the NEW bit of the STAT bitfield is not set, we probably
// have old data. Which can be really bad for ACS. And everything.
if ((replyPtr[2] >> 7) == 0) {
sif::error << "IMTQ: MGM measurement too old" << std::endl;
TaskFactory::delayTask(2);
if (i2cCmdExecMeasure(imtq::CC::GET_RAW_MTM_MEASUREMENT) != returnvalue::OK) {
return;
}
if ((replyPtr[2] >> 7) == 0b1) {
replyPtr[0] = false;
}
mgmMeasurementTooOld = true;
}
cmdBuf[0] = imtq::CC::GET_ENG_HK_DATA;
@ -149,7 +149,9 @@ void ImtqPollingTask::handleMeasureStep() {
if (i2cCmdExecMeasure(imtq::CC::GET_CAL_MTM_MEASUREMENT) != returnvalue::OK) {
return;
}
// sif::debug << "measure done" << std::endl;
if(mgmMeasurementTooOld) {
sif::error << "IMTQ: MGM measurement too old" << std::endl;
}
return;
}
@ -186,25 +188,22 @@ void ImtqPollingTask::handleActuateStep() {
if (i2cCmdExecActuate(imtq::CC::GET_RAW_MTM_MEASUREMENT) != returnvalue::OK) {
return;
}
bool measurementWasTooOld = false;
// See p.39 of the iMTQ user manual. If the NEW bit of the STAT bitfield is not set, we probably
// have old data. Which can be really bad for ACS. And everything.
if ((replyPtr[2] >> 7) == 0) {
sif::error << "IMTQ: MGM measurement too old" << std::endl;
TaskFactory::delayTask(2);
cmdBuf[0] = imtq::CC::GET_RAW_MTM_MEASUREMENT;
if (i2cCmdExecActuate(imtq::CC::GET_RAW_MTM_MEASUREMENT) != returnvalue::OK) {
return;
}
if ((replyPtr[2] >> 7) == 0b1) {
measurementWasTooOld = true;
replyPtr[0] = false;
}
}
cmdBuf[0] = imtq::CC::GET_ENG_HK_DATA;
if (i2cCmdExecActuate(imtq::CC::GET_ENG_HK_DATA) != returnvalue::OK) {
return;
}
// sif::debug << "measure with torque done" << std::endl;
if(measurementWasTooOld) {
sif::error << "IMTQ: MGM measurement too old" << std::endl;
}
return;
}
@ -223,7 +222,7 @@ ReturnValue_t ImtqPollingTask::initializeInterface(CookieIF* cookie) {
ReturnValue_t ImtqPollingTask::sendMessage(CookieIF* cookie, const uint8_t* sendData,
size_t sendLen) {
const auto* imtqReq = reinterpret_cast<const ImtqRequest*>(sendData);
const auto* imtqReq = reinterpret_cast<const imtq::Request*>(sendData);
{
MutexGuard mg(ipcLock);
if (imtqReq->request == imtq::RequestType::ACTUATE) {

View File

@ -33,13 +33,12 @@ class ImtqPollingTask : public SystemObject,
address_t i2cAddr = 0;
uint32_t currentIntegrationTimeMs = 10;
// Required in addition to integration time, otherwise old data might be read.
static constexpr uint32_t MGM_READ_BUFFER_TIME_MS = 3;
static constexpr uint32_t MGM_READ_BUFFER_TIME_MS = 6;
bool ignoreNextActuateRequest = false;
imtq::SpecialRequest specialRequest = imtq::SpecialRequest::NONE;
int16_t dipoles[3] = {};
uint16_t torqueDuration = 0;
// uint8_t startActuateRawBuf[3] = {};
std::array<uint8_t, 32> cmdBuf;
std::array<uint8_t, 524> replyBuf;

View File

@ -131,13 +131,22 @@ ReturnValue_t ImtqHandler::performOperation(uint8_t opCode) {
ImtqHandler::~ImtqHandler() = default;
void ImtqHandler::doStartUp() {
if (internalState != InternalState::STARTUP) {
commandExecuted = false;
updatePeriodicReply(true, imtq::cmdIds::REPLY_NO_TORQUE);
updatePeriodicReply(true, imtq::cmdIds::REPLY_WITH_TORQUE);
internalState = InternalState::STARTUP;
}
if (internalState == InternalState::STARTUP) {
if (commandExecuted) {
if (goToNormalMode) {
setMode(MODE_NORMAL);
} else {
setMode(_MODE_TO_ON);
}
commandExecuted = false;
}
}
}
void ImtqHandler::doShutDown() {
@ -145,6 +154,8 @@ void ImtqHandler::doShutDown() {
updatePeriodicReply(false, imtq::cmdIds::REPLY_WITH_TORQUE);
specialRequestActive = false;
firstReplyCycle = true;
internalState = InternalState::NONE;
commandExecuted = false;
setMode(_MODE_POWER_DOWN);
}
@ -162,8 +173,9 @@ ReturnValue_t ImtqHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
*id = imtq::cmdIds::REQUEST;
request.request = imtq::RequestType::DO_NOTHING;
request.specialRequest = imtq::SpecialRequest::NONE;
expectedReply = DeviceHandlerIF::NO_COMMAND_ID;
rawPacket = reinterpret_cast<uint8_t*>(&request);
rawPacketLen = sizeof(ImtqRequest);
rawPacketLen = sizeof(imtq::Request);
return returnvalue::OK;
}
}
@ -171,6 +183,10 @@ ReturnValue_t ImtqHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
}
ReturnValue_t ImtqHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
if (internalState == InternalState::STARTUP) {
*id = imtq::cmdIds::REQUEST;
return buildCommandFromCommand(*id, nullptr, 0);
}
return NOTHING_TO_SEND;
}
@ -183,7 +199,7 @@ ReturnValue_t ImtqHandler::buildCommandFromCommand(DeviceCommandId_t deviceComma
expectedReply = imtq::cmdIds::REPLY_NO_TORQUE;
specialRequestActive = true;
rawPacket = reinterpret_cast<uint8_t*>(&request);
rawPacketLen = sizeof(ImtqRequest);
rawPacketLen = sizeof(imtq::Request);
};
switch (deviceCommand) {
case (imtq::cmdIds::POS_X_SELF_TEST): {
@ -219,7 +235,7 @@ ReturnValue_t ImtqHandler::buildCommandFromCommand(DeviceCommandId_t deviceComma
request.specialRequest = imtq::SpecialRequest::NONE;
expectedReply = imtq::cmdIds::REPLY_NO_TORQUE;
rawPacket = reinterpret_cast<uint8_t*>(&request);
rawPacketLen = sizeof(ImtqRequest);
rawPacketLen = sizeof(imtq::Request);
return returnvalue::OK;
}
case (imtq::cmdIds::START_ACTUATION_DIPOLE): {
@ -258,7 +274,7 @@ ReturnValue_t ImtqHandler::buildCommandFromCommand(DeviceCommandId_t deviceComma
torquer::TORQUEING = true;
torquer::TORQUE_COUNTDOWN.setTimeout(dipoleSet.currentTorqueDurationMs.value);
rawPacket = reinterpret_cast<uint8_t*>(&request);
rawPacketLen = sizeof(ImtqRequest);
rawPacketLen = sizeof(imtq::Request);
return returnvalue::OK;
}
default:
@ -298,13 +314,20 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
ReturnValue_t result;
ReturnValue_t status = returnvalue::OK;
if (getMode() != MODE_NORMAL) {
// Ignore replies during transitions.
if (expectedReply == imtq::cmdIds::REPLY_NO_TORQUE) {
ImtqRepliesDefault replies(packet);
if (replies.devWasConfigured() and internalState == InternalState::STARTUP) {
commandExecuted = true;
}
}
return returnvalue::OK;
}
// arrayprinter::print(packet, ImtqReplies::BASE_LEN);
if (expectedReply == imtq::cmdIds::REPLY_NO_TORQUE) {
// sif::debug << "handle measure" << std::endl;
ImtqRepliesDefault replies(packet);
if (replies.devWasConfigured() and internalState == InternalState::STARTUP) {
commandExecuted = true;
}
if (specialRequestActive) {
if (replies.wasSpecialRequestRead()) {
uint8_t* specialRequest = replies.getSpecialRequest();
@ -347,7 +370,7 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
}
if (not replies.wasGetRawMgmMeasurementRead() and not firstReplyCycle) {
sif::warning << "IMTQ: Possible timing issue, system state was not read" << std::endl;
sif::warning << "IMTQ: Possible timing issue, raw MGM measurement was not read" << std::endl;
}
uint8_t* rawMgmMeasurement = replies.getRawMgmMeasurement();
result = parseStatusByte(imtq::CC::GET_RAW_MTM_MEASUREMENT, rawMgmMeasurement);
@ -358,7 +381,8 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
}
if (not replies.wasCalibMgmMeasurementRead() and not firstReplyCycle) {
sif::warning << "IMTQ: Possible timing issue, system state was not read" << std::endl;
sif::warning << "IMTQ: Possible timing issue, calib MGM measurement was not read"
<< std::endl;
}
uint8_t* calibMgmMeasurement = replies.getCalibMgmMeasurement();
result = parseStatusByte(imtq::CC::GET_CAL_MTM_MEASUREMENT, calibMgmMeasurement);

View File

@ -83,6 +83,11 @@ class ImtqHandler : public DeviceHandlerBase {
//! link between IMTQ and OBC.
static const Event INVALID_ERROR_BYTE = MAKE_EVENT(8, severity::LOW);
enum class InternalState { NONE, STARTUP, SHUTDOWN } internalState = InternalState::NONE;
bool commandExecuted = false;
imtq::Request request{};
imtq::StatusDataset statusSet;
imtq::DipoleActuationSet dipoleSet;
imtq::RawMtmMeasurementNoTorque rawMtmNoTorque;
@ -123,8 +128,7 @@ class ImtqHandler : public DeviceHandlerBase {
power::Switch_t switcher = power::NO_SWITCH;
ImtqRequest request{};
DeviceCommandId_t expectedReply = imtq::cmdIds::REPLY_WITH_TORQUE;
DeviceCommandId_t expectedReply = DeviceHandlerIF::NO_COMMAND_ID;
bool goToNormalMode = false;
bool debugMode = false;
bool specialRequestActive = false;

View File

@ -10,18 +10,6 @@ class ImtqHandler;
namespace imtq {
enum ComStep : uint8_t {
DHB_OP = 0,
START_MEASURE_SEND = 1,
START_MEASURE_GET = 2,
READ_MEASURE_SEND = 3,
READ_MEASURE_GET = 4,
START_ACTUATE_SEND = 5,
START_ACTUATE_GET = 6,
READ_ACTUATE_SEND = 7,
READ_ACTUATE_GET = 8,
};
enum class RequestType : uint8_t { MEASURE_NO_ACTUATION, ACTUATE, DO_NOTHING };
enum class SpecialRequest : uint8_t {
@ -35,6 +23,26 @@ enum class SpecialRequest : uint8_t {
GET_SELF_TEST_RESULT = 7
};
struct Request {
imtq::RequestType request = imtq::RequestType::MEASURE_NO_ACTUATION;
imtq::SpecialRequest specialRequest = imtq::SpecialRequest::NONE;
uint8_t integrationTimeSel = 3;
int16_t dipoles[3]{};
uint16_t torqueDuration = 0;
};
enum ComStep : uint8_t {
DHB_OP = 0,
START_MEASURE_SEND = 1,
START_MEASURE_GET = 2,
READ_MEASURE_SEND = 3,
READ_MEASURE_GET = 4,
START_ACTUATE_SEND = 5,
START_ACTUATE_GET = 6,
READ_ACTUATE_SEND = 7,
READ_ACTUATE_GET = 8,
};
static const uint8_t INTERFACE_ID = CLASS_ID::IMTQ_HANDLER;
static constexpr ReturnValue_t INVALID_COMMAND_CODE = MAKE_RETURN_CODE(0);
@ -1124,25 +1132,21 @@ class NegZSelfTestSet : public StaticLocalDataSet<SELF_TEST_DATASET_ENTRIES> {
} // namespace imtq
struct ImtqRequest {
imtq::RequestType request = imtq::RequestType::MEASURE_NO_ACTUATION;
imtq::SpecialRequest specialRequest = imtq::SpecialRequest::NONE;
int16_t dipoles[3]{};
uint16_t torqueDuration = 0;
};
struct ImtqRepliesDefault {
friend class ImtqPollingTask;
public:
static constexpr size_t BASE_LEN =
imtq::replySize::DEFAULT_MIN_LEN + 1 + imtq::replySize::SYSTEM_STATE + 1 +
1 + imtq::replySize::DEFAULT_MIN_LEN + 1 + imtq::replySize::SYSTEM_STATE + 1 +
+imtq::replySize::DEFAULT_MIN_LEN + 1 + imtq::replySize::RAW_MTM_MEASUREMENT + 1 +
imtq::replySize::ENG_HK_DATA_REPLY + 1 + imtq::replySize::CAL_MTM_MEASUREMENT + 1;
ImtqRepliesDefault(const uint8_t* rawData) : rawData(const_cast<uint8_t*>(rawData)) {
initPointers();
}
void setConfigured() { rawData[0] = true; }
bool devWasConfigured() const { return rawData[0]; }
uint8_t* getCalibMgmMeasurement() const { return calibMgmMeasurement + 1; }
bool wasCalibMgmMeasurementRead() const { return calibMgmMeasurement[0]; };
@ -1164,7 +1168,7 @@ struct ImtqRepliesDefault {
private:
void initPointers() {
swReset = rawData;
swReset = rawData + 1;
systemState = swReset + imtq::replySize::DEFAULT_MIN_LEN + 1;
startMtmMeasurement = systemState + imtq::replySize::SYSTEM_STATE + 1;
rawMgmMeasurement = startMtmMeasurement + imtq::replySize::DEFAULT_MIN_LEN + 1;
@ -1172,6 +1176,7 @@ struct ImtqRepliesDefault {
calibMgmMeasurement = engHk + imtq::replySize::ENG_HK_DATA_REPLY + 1;
specialRequestReply = calibMgmMeasurement + imtq::replySize::CAL_MTM_MEASUREMENT + 1;
}
uint8_t* rawData;
uint8_t* swReset;
uint8_t* systemState;