eive/eive-obsw
13
4
Fork 0
Code Issues 4 Pull Requests 1 Releases 121 Wiki Activity

building new EM config
All checks were successful
EIVE/eive-obsw/pipeline/head This commit looks good
Details
EIVE/eive-obsw/pipeline/pr-develop This commit looks good
Details

Browse Source
This commit is contained in:
Robin Müller
2022-04-29 15:47:54 +02:00
parent bbe1e996e6
commit c1248dd4e1
25 changed files with 1590 additions and 151 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
linux/fsfwconfig/FSFWConfig.h.in
View File

@ -76,9 +76,4 @@ static constexpr size_t FSFW_MAX_TM_PACKET_SIZE = 2048;
#define FSFW_HAL_I2C_WIRETAPPING 0
#define FSFW_DEV_HYPERION_GPS_CREATE_NMEA_CSV 0
#define FSFW_HAL_L3GD20_GYRO_DEBUG 0
#define FSFW_HAL_RM3100_MGM_DEBUG 0
#define FSFW_HAL_LIS3MDL_MGM_DEBUG 0
#define FSFW_HAL_ADIS1650X_GYRO_DEBUG 0
#endif /* CONFIG_FSFWCONFIG_H_ */

210
linux/fsfwconfig/OBSWConfig.h.in
View File

@ -1,210 +0,0 @@
/**
* @brief This file can be used to add preprocessor define for conditional
* code inclusion exclusion or various other project constants and
* properties in one place.
*/
#ifndef FSFWCONFIG_OBSWCONFIG_H_
#define FSFWCONFIG_OBSWCONFIG_H_
#cmakedefine RASPBERRY_PI
#cmakedefine XIPHOS_Q7S
#cmakedefine BEAGLEBONEBLACK
#cmakedefine EGSE
#cmakedefine TE0720_1CFA
#include "commonConfig.h"
#include "OBSWVersion.h"
#define Q7S_EM 0
/*******************************************************************/
/** All of the following flags should be enabled for mission code */
/*******************************************************************/
//! Timers can mess up the code when debugging
//! All of this should be enabled for mission code!
#if defined XIPHOS_Q7S
#define Q7S_EM 0
#define OBSW_USE_CCSDS_IP_CORE 1
// Set to 1 if all telemetry should be sent to the PTME IP Core
#define OBSW_TM_TO_PTME 0
// Set to 1 if telecommands are received via the PDEC IP Core
#define OBSW_TC_FROM_PDEC 0
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_MGT 1
#define OBSW_ADD_BPX_BATTERY_HANDLER 1
#define OBSW_ADD_STAR_TRACKER @OBSW_ADD_STAR_TRACKER@
#define OBSW_ADD_PLOC_SUPERVISOR 0
#define OBSW_ADD_PLOC_MPSOC 0
#define OBSW_ADD_SUN_SENSORS 1
#define OBSW_ADD_SUS_BOARD_ASS 1
#define OBSW_ADD_ACS_BOARD 1
#define OBSW_ADD_ACS_HANDLERS 1
#define OBSW_ADD_RW 0
#define OBSW_ADD_RTD_DEVICES 1
#define OBSW_ADD_TMP_DEVICES 1
#define OBSW_ADD_RAD_SENSORS 1
#define OBSW_ADD_PL_PCDU 1
#define OBSW_ADD_SYRLINKS 1
#define OBSW_ENABLE_SYRLINKS_TRANSMIT_TIMEOUT 0
#define OBSW_STAR_TRACKER_GROUND_CONFIG 1
#endif // XIPHOS_Q7S
// This is a really tricky switch.. It initializes the PCDU switches to their default states
// at powerup. I think it would be better
// to leave it off for now. It makes testing a lot more difficult and it might mess with
// something the operators might want to do by giving the software too much intelligence
// at the wrong place. The system component might command all the Switches accordingly anyway
#define OBSW_INITIALIZE_SWITCHES 0
#define OBSW_ENABLE_PERIODIC_HK 0
#ifdef TE0720_1CFA
#define OBSW_USE_CCSDS_IP_CORE 0
// Set to 1 if all telemetry should be sent to the PTME IP Core
#define OBSW_TM_TO_PTME 0
// Set to 1 if telecommands are received via the PDEC IP Core
#define OBSW_TC_FROM_PDEC 0
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_MGT 0
#define OBSW_ADD_BPX_BATTERY_HANDLER 0
#define OBSW_ADD_STAR_TRACKER 0
#define OBSW_ADD_PLOC_SUPERVISOR 0
#define OBSW_ADD_PLOC_MPSOC 1
#define OBSW_ADD_SUN_SENSORS 0
#define OBSW_ADD_ACS_BOARD 1
#define OBSW_ADD_ACS_HANDLERS 0
#define OBSW_ADD_RW 0
#define OBSW_ADD_RTD_DEVICES 0
#define OBSW_ADD_TMP_DEVICES 0
#define OBSW_ADD_RAD_SENSORS 0
#define OBSW_ADD_PL_PCDU 0
#define OBSW_ADD_SYRLINKS 0
#define OBSW_ENABLE_SYRLINKS_TRANSMIT_TIMEOUT 0
#define OBSW_SYRLINKS_SIMULATED 1
#define OBSW_STAR_TRACKER_GROUND_CONFIG 1
#define OBSW_ENABLE_PERIODIC_HK 0
#define OBSW_PRINT_CORE_HK 0
#define OBSW_INITIALIZE_SWITCHES 0
#endif
/*******************************************************************/
/** All of the following flags should be disabled for mission code */
/*******************************************************************/
// Can be used to switch device to NORMAL mode immediately
#define OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP 1
#define OBSW_PRINT_MISSED_DEADLINES 1
#define OBSW_SYRLINKS_SIMULATED 1
#define OBSW_ADD_TEST_CODE 0
#define OBSW_ADD_TEST_TASK 0
#define OBSW_ADD_TEST_PST 0
// If this is enabled, all other SPI code should be disabled
#define OBSW_ADD_SPI_TEST_CODE 0
// If this is enabled, all other I2C code should be disabled
#define OBSW_ADD_I2C_TEST_CODE 0
#define OBSW_ADD_UART_TEST_CODE 0
#define OBSW_TEST_ACS 0
#define OBSW_DEBUG_ACS 0
#define OBSW_TEST_SUS 0
#define OBSW_DEBUG_SUS 0
#define OBSW_TEST_RTD 0
#define OBSW_DEBUG_RTD 0
#define OBSW_TEST_RAD_SENSOR 0
#define OBSW_DEBUG_RAD_SENSOR 0
#define OBSW_TEST_PL_PCDU 0
#define OBSW_DEBUG_PL_PCDU 0
#define OBSW_TEST_BPX_BATT 0
#define OBSW_DEBUG_BPX_BATT 0
#define OBSW_TEST_IMTQ 0
#define OBSW_DEBUG_IMTQ 0
#define OBSW_TEST_RW 0
#define OBSW_DEBUG_RW 0
#define OBSW_TEST_LIBGPIOD 0
#define OBSW_TEST_PLOC_HANDLER 0
#define OBSW_TEST_CCSDS_BRIDGE 0
#define OBSW_TEST_CCSDS_PTME 0
#define OBSW_TEST_TE7020_HEATER 0
#define OBSW_TEST_GPIO_OPEN_BY_LABEL 0
#define OBSW_TEST_GPIO_OPEN_BY_LINE_NAME 0
#define OBSW_DEBUG_P60DOCK 0
#define OBSW_PRINT_CORE_HK 0
#define OBSW_DEBUG_PDU1 0
#define OBSW_DEBUG_PDU2 0
#define OBSW_DEBUG_GPS 0
#define OBSW_DEBUG_ACU 0
#define OBSW_DEBUG_SYRLINKS 0
#define OBSW_DEBUG_PDEC_HANDLER 0
#ifdef TE0720_1CFA
#define OBSW_DEBUG_PLOC_SUPERVISOR 1
#define OBSW_DEBUG_PLOC_MPSOC 1
#else
#define OBSW_DEBUG_PLOC_SUPERVISOR 0
#define OBSW_DEBUG_PLOC_MPSOC 0
#endif
#ifdef EGSE
#define OBSW_DEBUG_STARTRACKER 1
#else
#define OBSW_DEBUG_STARTRACKER 0
#endif
#ifdef RASPBERRY_PI
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_STAR_TRACKER 0
#define OBSW_ADD_PLOC_SUPERVISOR 0
#define OBSW_ADD_PLOC_MPSOC 0
#define OBSW_ADD_SUN_SENSORS 0
#define OBSW_ADD_MGT 0
#define OBSW_ADD_ACS_BOARD 0
#define OBSW_ADD_ACS_HANDLERS 0
#define OBSW_ADD_GPS_0 0
#define OBSW_ADD_GPS_1 0
#define OBSW_ADD_RW 0
#define OBSW_ADD_BPX_BATTERY_HANDLER 0
#define OBSW_ADD_RTD_DEVICES 0
#define OBSW_ADD_PL_PCDU 0
#define OBSW_ADD_TMP_DEVICES 0
#define OBSW_ADD_RAD_SENSORS 0
#define OBSW_ADD_SYRLINKS 0
#define OBSW_STAR_TRACKER_GROUND_CONFIG 1
#endif // RASPBERRY_PI
#define OBSW_TCP_SERVER_WIRETAPPING 0
/*******************************************************************/
/** CMake Defines */
/*******************************************************************/
#cmakedefine EIVE_BUILD_GPSD_GPS_HANDLER
#cmakedefine LIBGPS_VERSION_MAJOR @LIBGPS_VERSION_MAJOR@
#cmakedefine LIBGPS_VERSION_MINOR @LIBGPS_VERSION_MINOR@
#ifdef RASPBERRY_PI
#include "rpiConfig.h"
#elif defined(XIPHOS_Q7S)
#include "q7sConfig.h"
#endif
#ifdef __cplusplus
#include "objects/systemObjectList.h"
#include "events/subsystemIdRanges.h"
#include "returnvalues/classIds.h"
#endif
#endif /* FSFWCONFIG_OBSWCONFIG_H_ */

4
linux/fsfwconfig/pollingsequence/pollingSequenceFactory.cpp
View File

@ -510,8 +510,6 @@ ReturnValue_t pst::pstUart(FixedTimeslotTaskIF *thisSequence) {
ReturnValue_t pst::pstGompaceCan(FixedTimeslotTaskIF *thisSequence) {
uint32_t length = thisSequence->getPeriodMs();
#ifndef TE0720_1CFA
#if Q7S_EM != 1
// PCDU handlers receives two messages and both must be handled
thisSequence->addSlot(objects::PCDU_HANDLER, length * 0, DeviceHandlerIF::PERFORM_OPERATION);
@ -543,8 +541,6 @@ ReturnValue_t pst::pstGompaceCan(FixedTimeslotTaskIF *thisSequence) {
sif::error << "GomSpace PST initialization failed" << std::endl;
return HasReturnvaluesIF::RETURN_FAILED;
}
#endif /* Q7S_EM == 0 */
#endif
static_cast<void>(length);
return HasReturnvaluesIF::RETURN_OK;
}