bsp_q7s/core/ObjectFactory.cpp

@@ -56,6 +56,7 @@
 #endif
 #include <mission/devices/ImtqHandler.h>
 #include <mission/devices/PcduHandler.h>
+#include <mission/devices/SyrlinksHandler.h>
 
 #include <sstream>
 
@@ -88,7 +89,6 @@
 #include "mission/devices/RadiationSensorHandler.h"
 #include "mission/devices/RwHandler.h"
 #include "mission/devices/SolarArrayDeploymentHandler.h"
-#include <mission/devices/SyrlinksHandler.h>
 #include "mission/devices/Tmp1075Handler.h"
 #include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
 #include "mission/devices/devicedefinitions/Max31865Definitions.h"
@@ -587,7 +587,7 @@ void ObjectFactory::createSyrlinksComponents(PowerSwitchIF* pwrSwitcher) {
   auto syrlinksFdir = new SyrlinksFdir(objects::SYRLINKS_HK_HANDLER);
   auto syrlinksHandler =
       new SyrlinksHandler(objects::SYRLINKS_HK_HANDLER, objects::UART_COM_IF, syrlinksUartCookie,
-                            pcdu::PDU1_CH1_SYRLINKS_12V, syrlinksFdir);
+                          pcdu::PDU1_CH1_SYRLINKS_12V, syrlinksFdir);
   syrlinksHandler->setPowerSwitcher(pwrSwitcher);
 #if OBSW_DEBUG_SYRLINKS == 1
   syrlinksHandler->setDebugMode(true);

mission/devices/SyrlinksHandler.cpp

@@ -1,10 +1,11 @@
 #include <fsfw/datapool/PoolReadGuard.h>
 #include <fsfw/globalfunctions/CRC.h>
 #include <mission/devices/SyrlinksHandler.h>
+
 #include "OBSWConfig.h"
 
 SyrlinksHandler::SyrlinksHandler(object_id_t objectId, object_id_t comIF, CookieIF* comCookie,
-                                     power::Switch_t powerSwitch, FailureIsolationBase* customFdir)
+                                 power::Switch_t powerSwitch, FailureIsolationBase* customFdir)
     : DeviceHandlerBase(objectId, comIF, comCookie, customFdir),
       rxDataset(this),
       txDataset(this),
@@ -15,16 +16,17 @@ SyrlinksHandler::SyrlinksHandler(object_id_t objectId, object_id_t comIF, Cookie
   }
 }
 
-SyrlinksHandler::~SyrlinksHandler() {}
+SyrlinksHandler::~SyrlinksHandler() = default;
 
 void SyrlinksHandler::doStartUp() {
-  switch (startupState) {
+  switch (internalState) {
-    case StartupState::OFF: {
+    case InternalState::OFF: {
-      startupState = StartupState::ENABLE_TEMPERATURE_PROTECTION;
+      internalState = InternalState::ENABLE_TEMPERATURE_PROTECTION;
       break;
     }
-    case StartupState::DONE: {
+    case InternalState::IDLE: {
       setMode(_MODE_TO_ON);
+      commandExecuted = false;
       break;
     }
     default:
@@ -34,6 +36,8 @@ void SyrlinksHandler::doStartUp() {
 
 void SyrlinksHandler::doShutDown() {
   setMode(_MODE_POWER_DOWN);
+  commandExecuted = false;
+  internalState = InternalState::OFF;
   temperatureSet.setValidity(false, true);
 }
 
@@ -84,11 +88,23 @@ ReturnValue_t SyrlinksHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
 }
 
 ReturnValue_t SyrlinksHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
-  switch (startupState) {
+  switch (internalState) {
-    case StartupState::ENABLE_TEMPERATURE_PROTECTION: {
+    case InternalState::ENABLE_TEMPERATURE_PROTECTION: {
       *id = syrlinks::WRITE_LCL_CONFIG;
       return buildCommandFromCommand(*id, nullptr, 0);
     }
+    case InternalState::SET_TX_MODULATION: {
+      *id = syrlinks::SET_TX_MODE_MODULATION;
+      return buildCommandFromCommand(*id, nullptr, 0);
+    }
+    case InternalState::SET_TX_CW: {
+      *id = syrlinks::SET_TX_MODE_CW;
+      return buildCommandFromCommand(*id, nullptr, 0);
+    }
+    case InternalState::SET_TX_STANDBY: {
+      *id = syrlinks::SET_TX_MODE_STANDBY;
+      return buildCommandFromCommand(*id, nullptr, 0);
+    }
     default:
       break;
   }
@@ -96,8 +112,8 @@ ReturnValue_t SyrlinksHandler::buildTransitionDeviceCommand(DeviceCommandId_t* i
 }
 
 ReturnValue_t SyrlinksHandler::buildCommandFromCommand(DeviceCommandId_t deviceCommand,
-                                                         const uint8_t* commandData,
+                                                       const uint8_t* commandData,
-                                                         size_t commandDataLen) {
+                                                       size_t commandDataLen) {
   switch (deviceCommand) {
     case (syrlinks::RESET_UNIT): {
       prepareCommand(resetCommand, deviceCommand);
@@ -223,7 +239,7 @@ void SyrlinksHandler::fillCommandAndReplyMap() {
 }
 
 ReturnValue_t SyrlinksHandler::scanForReply(const uint8_t* start, size_t remainingSize,
-                                              DeviceCommandId_t* foundId, size_t* foundLen) {
+                                            DeviceCommandId_t* foundId, size_t* foundLen) {
   ReturnValue_t result = returnvalue::OK;
 
   if (*start != '<') {
@@ -592,7 +608,7 @@ void SyrlinksHandler::setNormalDatapoolEntriesInvalid() {}
 uint32_t SyrlinksHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 500; }
 
 ReturnValue_t SyrlinksHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
-                                                         LocalDataPoolManager& poolManager) {
+                                                       LocalDataPoolManager& poolManager) {
   localDataPoolMap.emplace(syrlinks::RX_STATUS, new PoolEntry<uint8_t>({0}));
   localDataPoolMap.emplace(syrlinks::RX_SENSITIVITY, new PoolEntry<uint32_t>({0}));
   localDataPoolMap.emplace(syrlinks::RX_FREQUENCY_SHIFT, new PoolEntry<int32_t>({0}));
@@ -624,10 +640,36 @@ float SyrlinksHandler::calcTempVal(uint16_t raw) { return 0.126984 * raw - 67.87
 ReturnValue_t SyrlinksHandler::handleAckReply(const uint8_t* packet) {
   ReturnValue_t result =
       parseReplyStatus(reinterpret_cast<const char*>(packet + syrlinks::MESSAGE_HEADER_SIZE));
-  if (rememberCommandId == syrlinks::WRITE_LCL_CONFIG and result != returnvalue::OK) {
+  switch (rememberCommandId) {
-    startupState = StartupState::OFF;
+    case (syrlinks::WRITE_LCL_CONFIG): {
-  } else if (rememberCommandId == syrlinks::WRITE_LCL_CONFIG and result == returnvalue::OK) {
+      if (result != returnvalue::OK) {
-    startupState = StartupState::DONE;
+        internalState = InternalState::OFF;
+      } else if (result == returnvalue::OK) {
+        internalState = InternalState::IDLE;
+      }
+      break;
+    }
+    case (syrlinks::SET_TX_MODE_STANDBY): {
+      if (result == returnvalue::OK) {
+        internalState = InternalState::IDLE;
+        commandExecuted = true;
+      }
+      break;
+    }
+    case (syrlinks::SET_TX_MODE_MODULATION): {
+      if (result == returnvalue::OK) {
+        internalState = InternalState::IDLE;
+        commandExecuted = true;
+      }
+      break;
+    }
+    case (syrlinks::SET_TX_MODE_CW): {
+      if (result == returnvalue::OK) {
+        internalState = InternalState::IDLE;
+        commandExecuted = true;
+      }
+      break;
+    }
   }
   return result;
 }
@@ -640,3 +682,40 @@ void SyrlinksHandler::prepareCommand(std::string command, DeviceCommandId_t comm
 }
 
 void SyrlinksHandler::setDebugMode(bool enable) { this->debugMode = enable; }
+
+void SyrlinksHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
+  Mode_t tgtMode = getBaseMode(getMode());
+  if (tgtMode == HasModesIF::MODE_ON or tgtMode == DeviceHandlerIF::MODE_NORMAL) {
+    switch (getSubmode()) {
+      case (syrlinks::Submode::TX_MODULATION): {
+        if (commandExecuted) {
+          setMode(tgtMode);
+          return;
+        }
+        internalState = InternalState::SET_TX_MODULATION;
+        break;
+      }
+      case (syrlinks::Submode::TX_STANDBY): {
+        if (commandExecuted) {
+          setMode(tgtMode);
+          return;
+        }
+        internalState = InternalState::SET_TX_STANDBY;
+        break;
+      }
+      case (syrlinks::Submode::TX_CW): {
+        if (commandExecuted) {
+          setMode(tgtMode);
+          return;
+        }
+        internalState = InternalState::SET_TX_CW;
+        break;
+      }
+      default: {
+        setMode(tgtMode);
+      }
+    }
+  } else {
+    setMode(tgtMode);
+  }
+}

mission/devices/SyrlinksHandler.h

@@ -21,7 +21,7 @@
 class SyrlinksHandler : public DeviceHandlerBase {
  public:
   SyrlinksHandler(object_id_t objectId, object_id_t comIF, CookieIF* comCookie,
-                    power::Switch_t powerSwitch, FailureIsolationBase* customFdir);
+                  power::Switch_t powerSwitch, FailureIsolationBase* customFdir);
   virtual ~SyrlinksHandler();
 
   /**
@@ -34,6 +34,7 @@ class SyrlinksHandler : public DeviceHandlerBase {
  protected:
   void doStartUp() override;
   void doShutDown() override;
+  void doTransition(Mode_t modeFrom, Submode_t subModeFrom) override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t* id) override;
   ReturnValue_t buildTransitionDeviceCommand(DeviceCommandId_t* id) override;
   ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand, const uint8_t* commandData,
@@ -104,12 +105,20 @@ class SyrlinksHandler : public DeviceHandlerBase {
   uint16_t rawTempBasebandBoard = 0;
   float tempPowerAmplifier = 0;
   float tempBasebandBoard = 0;
+  bool commandExecuted = false;
 
   uint8_t commandBuffer[syrlinks::MAX_COMMAND_SIZE];
 
-  enum class StartupState { OFF, ENABLE_TEMPERATURE_PROTECTION, DONE };
+  enum class InternalState {
+    OFF,
+    ENABLE_TEMPERATURE_PROTECTION,
+    SET_TX_MODULATION,
+    SET_TX_CW,
+    SET_TX_STANDBY,
+    IDLE
+  };
 
-  StartupState startupState = StartupState::OFF;
+  InternalState internalState = InternalState::OFF;
 
   /**
    * This object is used to store the id of the next command to execute. This controls the

mission/devices/devicedefinitions/SyrlinksDefinitions.h

@@ -6,6 +6,14 @@
 
 namespace syrlinks {
 
+enum Submode {
+  DEFAULT,
+  TX_STANDBY,
+  TX_MODULATION,
+  // TODO: Is this needed?
+  TX_CW
+};
+
 static constexpr uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::SYRLINKS;
 
 static constexpr Event FDIR_REACTION_IGNORED = event::makeEvent(SUBSYSTEM_ID, 0, severity::MEDIUM);