some tweaks for busy handling #500

Merged
muellerr merged 28 commits from tweak_papb_busy_polling into develop 2023-03-24 14:15:01 +01:00
33 changed files with 301 additions and 117 deletions
Showing only changes of commit 7a0641b98c - Show all commits

View File

@ -18,6 +18,28 @@ will consitute of a breaking change warranting a new major release:
## Added
- The persistent TM stores now have low priorities and behave like background threads now. This
should prevent them from blocking or slowing down the system even during dumps.
# [v1.39.1] 2023-03-22
## Fixed
- Bugfix for STR: Some action commands wrongfully declined.
- STR: No normal command handling while a special request like an image upload is active.
- RS485 data line was not enabled when the transmitter was switched on.
# [v1.39.0] 2023-03-21
Requires firmware update for new FPGA design where reset line is routed into the software.
2 relevant PRs:
- https://egit.irs.uni-stuttgart.de/eive/q7s-vivado/pulls/53
- https://egit.irs.uni-stuttgart.de/eive/q7s-vivado/pulls/54
eive-tmtc: v2.19.3
## Added
- Added NaN and Inf check for the `MEKF`. If these are detected, the `AcsController` will reset
the `MEKF` on its own once. This way, there will not be an event spam and operators will have
to look into the reason of wrong outputs. To restore the reset ability, an action command has
@ -40,8 +62,13 @@ will consitute of a breaking change warranting a new major release:
Furthermore, the submode in the NORMAL mode now should be 0 instead of some ON mode submode.
- Updated GYR bias values to newest measurements. This also corrects the ADIS values to always
consit of just one digit.
- The persistent TM stores now have low priorities and behave like background threads now. This
should prevent them from blocking or slowing down the system even during dumps.
- The CCSDS IP core handler now exposes a parameter to enable the priority select mode
for the PTME core. This mode prioritizes virtual channels with a lower index, so for example
the virtual channel (VC0) will have the highest priority, while VC3 will have the lowestg
priority. This mode will be enabled by default for now, but can be set via the parameter IF with
the unique parameter ID 0. The update of this mode requires a PTME reset. Therefore, it will only
be performed when the transmitter is off to avoid weird bugs.
- Connect and handle reset line for the PTME core in the software now.
- Safe mode controller failure event now only triggers once per minute.
# [v1.38.0] 2023-03-17

View File

@ -10,8 +10,8 @@
cmake_minimum_required(VERSION 3.13)
set(OBSW_VERSION_MAJOR 1)
set(OBSW_VERSION_MINOR 38)
set(OBSW_VERSION_REVISION 0)
set(OBSW_VERSION_MINOR 39)
set(OBSW_VERSION_REVISION 1)
# set(CMAKE_VERBOSE TRUE)

View File

@ -1,6 +1,7 @@
pipeline {
environment {
BUILDDIR_Q7 = 'build_q7'
BUILDDIR_Q7S = 'build_q7s_fm'
BUILDDIR_Q7S_EM = 'build_q7s_em'
BUILDDIR_LINUX = 'build_linux'
}
agent {
@ -12,15 +13,24 @@ pipeline {
stages {
stage('Clean') {
steps {
sh 'rm -rf $BUILDDIR_Q7'
sh 'rm -rf $BUILDDIR_Q7S'
sh 'rm -rf $BUILDDIR_Q7S_EM'
sh 'rm -rf $BUILDDIR_LINUX'
}
}
stage('Build Q7S') {
steps {
dir(BUILDDIR_Q7) {
dir(BUILDDIR_Q7S) {
sh 'cmake -DTGT_BSP="arm/q7s" -DCMAKE_BUILD_TYPE=Debug ..'
sh 'cmake --build . -j4'
sh 'cmake --build . -j6'
}
}
}
stage('Build Q7S EM') {
steps {
dir(BUILDDIR_Q7S_EM) {
sh 'cmake -DTGT_BSP="arm/q7s" -DEIVE_Q7S_EM=ON -DCMAKE_BUILD_TYPE=Debug ..'
sh 'cmake --build . -j6'
}
}
}
@ -28,7 +38,7 @@ pipeline {
steps {
dir(BUILDDIR_LINUX) {
sh 'cmake ..'
sh 'cmake --build . -j4'
sh 'cmake --build . -j6'
sh './eive-unittest'
}
}

View File

@ -1,7 +1,7 @@
/**
* @brief Auto-generated event translation file. Contains 278 translations.
* @brief Auto-generated event translation file. Contains 279 translations.
* @details
* Generated on: 2023-03-21 12:45:57
* Generated on: 2023-03-21 23:59:36
*/
#include "translateEvents.h"
@ -260,6 +260,7 @@ const char *VERSION_INFO_STRING = "VERSION_INFO";
const char *CURRENT_IMAGE_INFO_STRING = "CURRENT_IMAGE_INFO";
const char *REBOOT_COUNTER_STRING = "REBOOT_COUNTER";
const char *INDIVIDUAL_BOOT_COUNTS_STRING = "INDIVIDUAL_BOOT_COUNTS";
const char *I2C_UNAVAILABLE_REBOOT_STRING = "I2C_UNAVAILABLE_REBOOT";
const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
@ -791,6 +792,8 @@ const char *translateEvents(Event event) {
return REBOOT_COUNTER_STRING;
case (14008):
return INDIVIDUAL_BOOT_COUNTS_STRING;
case (14010):
return I2C_UNAVAILABLE_REBOOT_STRING;
case (14100):
return NO_VALID_SENSOR_TEMPERATURE_STRING;
case (14101):

View File

@ -2,7 +2,7 @@
* @brief Auto-generated object translation file.
* @details
* Contains 169 translations.
* Generated on: 2023-03-21 12:45:57
* Generated on: 2023-03-21 23:59:36
*/
#include "translateObjects.h"

View File

@ -90,6 +90,8 @@ static constexpr char PAPB_BUSY_SIGNAL_VC2[] = "papb_busy_signal_vc2";
static constexpr char PAPB_EMPTY_SIGNAL_VC2[] = "papb_empty_signal_vc2";
static constexpr char PAPB_BUSY_SIGNAL_VC3[] = "papb_busy_signal_vc3";
static constexpr char PAPB_EMPTY_SIGNAL_VC3[] = "papb_empty_signal_vc3";
static constexpr char PTME_RESETN[] = "ptme_resetn";
static constexpr char RS485_EN_TX_CLOCK[] = "tx_clock_enable_ltc2872";
static constexpr char RS485_EN_TX_DATA[] = "tx_data_enable_ltc2872";
static constexpr char RS485_EN_RX_CLOCK[] = "rx_clock_enable_ltc2872";

View File

@ -31,7 +31,7 @@
xsc::Chip CoreController::CURRENT_CHIP = xsc::Chip::NO_CHIP;
xsc::Copy CoreController::CURRENT_COPY = xsc::Copy::NO_COPY;
CoreController::CoreController(object_id_t objectId, const std::atomic_uint16_t& i2cErrors)
CoreController::CoreController(object_id_t objectId, const std::atomic_uint16_t &i2cErrors)
: ExtendedControllerBase(objectId, 5),
cmdExecutor(4096),
cmdReplyBuf(4096, true),
@ -108,7 +108,7 @@ void CoreController::performControlOperation() {
sdStateMachine();
performMountedSdCardOperations();
readHkData();
if(i2cErrors >= 5) {
if (i2cErrors >= 5) {
bool protOpPerformed = false;
triggerEvent(I2C_UNAVAILABLE_REBOOT);
gracefulShutdownTasks(CURRENT_CHIP, CURRENT_COPY, protOpPerformed);

View File

@ -6,6 +6,7 @@
#include <fsfw/globalfunctions/PeriodicOperationDivider.h>
#include <libxiphos.h>
#include <atomic>
#include <cstddef>
#include "CoreDefinitions.h"
@ -15,7 +16,6 @@
#include "fsfw/controller/ExtendedControllerBase.h"
#include "mission/devices/devicedefinitions/GPSDefinitions.h"
#include "mission/trace.h"
#include <atomic>
class Timer;
class SdCardManager;
@ -132,7 +132,8 @@ class CoreController : public ExtendedControllerBase {
//! P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1.
//! P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.
static constexpr Event INDIVIDUAL_BOOT_COUNTS = event::makeEvent(SUBSYSTEM_ID, 8, severity::INFO);
static constexpr Event I2C_UNAVAILABLE_REBOOT = event::makeEvent(SUBSYSTEM_ID, 10, severity::MEDIUM);
static constexpr Event I2C_UNAVAILABLE_REBOOT =
event::makeEvent(SUBSYSTEM_ID, 10, severity::MEDIUM);
CoreController(object_id_t objectId, const std::atomic_uint16_t& i2cErrors);
virtual ~CoreController();

View File

@ -748,7 +748,13 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_BUSY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC3, "PAPB VC3");
gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_EMPTY, gpio);
// Initialise to low and then pull high to do a PTME reset, which puts the PTME in reset
// state. It will be put out of reset in the CCSDS handler initialize function.
gpio = new GpiodRegularByLineName(q7s::gpioNames::PTME_RESETN, "PTME RESETN",
gpio::Direction::OUT, gpio::Levels::LOW);
gpioCookiePtmeIp->addGpio(gpioIds::PTME_RESETN, gpio);
gpioChecker(args.gpioComIF.addGpios(gpioCookiePtmeIp), "PTME PAPB VCs");
// Creating virtual channel interfaces
VirtualChannelIF* vc0 =
new PapbVcInterface(&args.gpioComIF, gpioIds::VC0_PAPB_BUSY, gpioIds::VC0_PAPB_EMPTY,
@ -772,9 +778,14 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
new AxiPtmeConfig(objects::AXI_PTME_CONFIG, q7s::UIO_PTME, q7s::uiomapids::PTME_CONFIG);
PtmeConfig* ptmeConfig = new PtmeConfig(objects::PTME_CONFIG, axiPtmeConfig);
*args.ipCoreHandler = new CcsdsIpCoreHandler(
objects::CCSDS_HANDLER, objects::CCSDS_PACKET_DISTRIBUTOR, *ptmeConfig, LINK_STATE,
&args.gpioComIF, gpioIds::RS485_EN_TX_CLOCK, gpioIds::RS485_EN_TX_DATA);
PtmeGpios gpios;
gpios.enableTxClock = gpioIds::RS485_EN_TX_CLOCK;
gpios.enableTxData = gpioIds::RS485_EN_TX_DATA;
gpios.ptmeResetn = gpioIds::PTME_RESETN;
*args.ipCoreHandler =
new CcsdsIpCoreHandler(objects::CCSDS_HANDLER, objects::CCSDS_PACKET_DISTRIBUTOR, *ptmeConfig,
LINK_STATE, &args.gpioComIF, gpios);
// This VC will receive all live TM
auto* vcWithQueue =
new VirtualChannelWithQueue(objects::PTME_VC0_LIVE_TM, ccsds::VC0, "PTME VC0 LIVE TM", *ptme,

View File

@ -11,8 +11,8 @@
#include <mission/tmtc/PersistentLogTmStoreTask.h>
#include <mission/tmtc/PusTmFunnel.h>
#include <string>
#include <atomic>
#include <string>
class LinuxLibgpioIF;
class SerialComIF;

View File

@ -66,7 +66,7 @@ void ObjectFactory::produce(void* args) {
dummy::createDummies(dummyCfg, *pwrSwitcher, gpioComIF);
new CoreController(objects::CORE_CONTROLLER);
new CoreController(objects::CORE_CONTROLLER, I2C_FATAL_ERRORS);
// Regular FM code, does not work for EM if the hardware is not connected
// createPcduComponents(gpioComIF, &pwrSwitcher);

View File

@ -102,6 +102,7 @@ enum gpioId_t {
VC2_PAPB_BUSY,
VC3_PAPB_EMPTY,
VC3_PAPB_BUSY,
PTME_RESETN,
PDEC_RESET,

View File

@ -259,6 +259,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
14006;0x36b6;CURRENT_IMAGE_INFO;INFO;P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;bsp_q7s/core/CoreController.h
14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;bsp_q7s/core/CoreController.h
14010;0x36ba;I2C_UNAVAILABLE_REBOOT;MEDIUM;No description;bsp_q7s/core/CoreController.h
14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/ThermalController.h
14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/ThermalController.h
14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h

1 Event ID (dec) Event ID (hex) Name Severity Description File Path
259 14006 0x36b6 CURRENT_IMAGE_INFO INFO P1: Current Chip, P2: Current Copy bsp_q7s/core/CoreController.h
260 14007 0x36b7 REBOOT_COUNTER INFO Total reboot counter, which is the sum of the boot count of all individual images. bsp_q7s/core/CoreController.h
261 14008 0x36b8 INDIVIDUAL_BOOT_COUNTS INFO Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1. bsp_q7s/core/CoreController.h
262 14010 0x36ba I2C_UNAVAILABLE_REBOOT MEDIUM No description bsp_q7s/core/CoreController.h
263 14010 14100 0x36ba 0x3714 I2C_UNAVAILABLE_REBOOT NO_VALID_SENSOR_TEMPERATURE MEDIUM No description bsp_q7s/core/CoreController.h mission/controller/ThermalController.h
264 14100 14101 0x3714 0x3715 NO_VALID_SENSOR_TEMPERATURE NO_HEALTHY_HEATER_AVAILABLE MEDIUM No description mission/controller/ThermalController.h
265 14101 14102 0x3715 0x3716 NO_HEALTHY_HEATER_AVAILABLE SYRLINKS_OVERHEATING MEDIUM HIGH No description mission/controller/ThermalController.h

View File

@ -190,8 +190,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x2207;TMF_AllDeleted;No description;7;TM_STORE_FRONTEND_IF;fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
0x2208;TMF_InvalidData;No description;8;TM_STORE_FRONTEND_IF;fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
0x2209;TMF_NotReady;No description;9;TM_STORE_FRONTEND_IF;fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
0x2401;MT_TooDetailedRequest;No description;1;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2402;MT_TooGeneralRequest;No description;2;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2401;MT_NoPacketFound;No description;1;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/DleParser.h
0x2402;MT_PossiblePacketLoss;No description;2;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/DleParser.h
0x2403;MT_NoMatch;No description;3;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2404;MT_Full;No description;4;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2405;MT_NewNodeCreated;No description;5;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
@ -370,8 +370,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x3e03;HKM_PeriodicHelperInvalid;No description;3;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
0x3e04;HKM_PoolobjectNotFound;No description;4;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
0x3e05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
0x3f01;DLEE_NoPacketFound;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
0x3f02;DLEE_PossiblePacketLoss;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
0x3f01;DLEE_StreamTooShort;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
0x3f02;DLEE_DecodingError;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
0x4201;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
0x4202;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
0x4203;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
@ -401,9 +401,9 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x4403;UXOS_CommandError;Command execution failed;3;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
0x4404;UXOS_NoCommandLoadedOrPending;;4;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
0x4406;UXOS_PcloseCallError;No description;6;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
0x4500;HSPI_OpeningFileFailed;No description;0;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
0x4501;HSPI_FullDuplexTransferFailed;No description;1;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
0x4502;HSPI_HalfDuplexTransferFailed;No description;2;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
0x4500;HSPI_HalTimeoutRetval;No description;0;HAL_SPI;fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
0x4501;HSPI_HalBusyRetval;No description;1;HAL_SPI;fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
0x4502;HSPI_HalErrorRetval;No description;2;HAL_SPI;fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
0x4601;HURT_UartReadFailure;No description;1;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
0x4602;HURT_UartReadSizeMissmatch;No description;2;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
0x4603;HURT_UartRxBufferTooSmall;No description;3;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
@ -456,14 +456,19 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
0x5da0;GOMS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da1;GOMS_InvalidRampTime;Action Message with invalid ramp time was received.;161;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da2;GOMS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da3;GOMS_ExecutionFailed;Command execution failed;163;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da4;GOMS_CrcError;Reaction wheel reply has invalid crc;164;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da5;GOMS_ValueNotRead;No description;165;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x60a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/tmtc/CcsdsIpCoreHandler.h
0x63a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
0x66a0;SADPL_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a1;SADPL_InvalidRampTime;Action Message with invalid ramp time was received.;161;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a2;SADPL_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a3;SADPL_ExecutionFailed;Command execution failed;163;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a4;SADPL_CrcError;Reaction wheel reply has invalid crc;164;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a5;SADPL_ValueNotRead;No description;165;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x6900;ACSCTRL_FileDeletionFailed;No description;0;ACS_CTRL;mission/controller/AcsController.h
0x6a02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
0x6a03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h

1 Full ID (hex) Name Description Unique ID Subsytem Name File Path
190 0x2207 TMF_AllDeleted No description 7 TM_STORE_FRONTEND_IF fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
191 0x2208 TMF_InvalidData No description 8 TM_STORE_FRONTEND_IF fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
192 0x2209 TMF_NotReady No description 9 TM_STORE_FRONTEND_IF fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
193 0x2401 MT_NoPacketFound No description 1 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/DleParser.h
194 0x2402 MT_PossiblePacketLoss No description 2 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/DleParser.h
195 0x2403 MT_NoMatch No description 3 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
196 0x2404 MT_Full No description 4 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
197 0x2405 MT_NewNodeCreated No description 5 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
370 0x3e03 HKM_PeriodicHelperInvalid No description 3 HOUSEKEEPING_MANAGER fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
371 0x3e04 HKM_PoolobjectNotFound No description 4 HOUSEKEEPING_MANAGER fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
372 0x3e05 HKM_DatasetNotFound No description 5 HOUSEKEEPING_MANAGER fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
373 0x3f01 DLEE_StreamTooShort No description 1 DLE_ENCODER fsfw/src/fsfw/globalfunctions/DleEncoder.h
374 0x3f02 DLEE_DecodingError No description 2 DLE_ENCODER fsfw/src/fsfw/globalfunctions/DleEncoder.h
375 0x4201 PUS11_InvalidTypeTimeWindow No description 1 PUS_SERVICE_11 fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
376 0x4202 PUS11_InvalidTimeWindow No description 2 PUS_SERVICE_11 fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
377 0x4203 PUS11_TimeshiftingNotPossible No description 3 PUS_SERVICE_11 fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
401 0x4403 UXOS_CommandError Command execution failed 3 LINUX_OSAL fsfw/src/fsfw_hal/linux/CommandExecutor.h
402 0x4404 UXOS_NoCommandLoadedOrPending 4 LINUX_OSAL fsfw/src/fsfw_hal/linux/CommandExecutor.h
403 0x4406 UXOS_PcloseCallError No description 6 LINUX_OSAL fsfw/src/fsfw_hal/linux/CommandExecutor.h
404 0x4500 HSPI_HalTimeoutRetval No description 0 HAL_SPI fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
405 0x4501 HSPI_HalBusyRetval No description 1 HAL_SPI fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
406 0x4502 HSPI_HalErrorRetval No description 2 HAL_SPI fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
407 0x4601 HURT_UartReadFailure No description 1 HAL_UART fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
408 0x4602 HURT_UartReadSizeMissmatch No description 2 HAL_UART fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
409 0x4603 HURT_UartRxBufferTooSmall No description 3 HAL_UART fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
456 0x5d03 GOMS_InvalidParamSize No description 3 GOM_SPACE_HANDLER mission/devices/GomspaceDeviceHandler.h
457 0x5d04 GOMS_InvalidPayloadSize No description 4 GOM_SPACE_HANDLER mission/devices/GomspaceDeviceHandler.h
458 0x5d05 GOMS_UnknownReplyId No description 5 GOM_SPACE_HANDLER mission/devices/GomspaceDeviceHandler.h
459 0x5da0 GOMS_InvalidSpeed Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000] 160 GOM_SPACE_HANDLER mission/devices/RwHandler.h
460 0x5da1 GOMS_InvalidRampTime Action Message with invalid ramp time was received. 161 GOM_SPACE_HANDLER mission/devices/RwHandler.h
461 0x5da2 GOMS_SetSpeedCommandInvalidLength Received set speed command has invalid length. Should be 6. 162 GOM_SPACE_HANDLER mission/devices/RwHandler.h
462 0x5da3 GOMS_ExecutionFailed Command execution failed 163 GOM_SPACE_HANDLER mission/devices/RwHandler.h
463 0x5da4 GOMS_CrcError Reaction wheel reply has invalid crc 164 GOM_SPACE_HANDLER mission/devices/RwHandler.h
464 0x5da5 GOMS_ValueNotRead No description 165 GOM_SPACE_HANDLER mission/devices/RwHandler.h
465 0x5da0 0x60a0 GOMS_InvalidSpeed CCSDS_CommandNotImplemented Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000] Received action message with unknown action id 160 GOM_SPACE_HANDLER CCSDS_HANDLER mission/devices/RwHandler.h mission/tmtc/CcsdsIpCoreHandler.h
466 0x5da1 0x63a0 GOMS_InvalidRampTime NVMB_KeyNotExists Action Message with invalid ramp time was received. Specified key does not exist in json file 161 160 GOM_SPACE_HANDLER NVM_PARAM_BASE mission/devices/RwHandler.h mission/memory/NvmParameterBase.h
467 0x5da2 0x66a0 GOMS_SetSpeedCommandInvalidLength SADPL_CommandNotSupported Received set speed command has invalid length. Should be 6. No description 162 160 GOM_SPACE_HANDLER SA_DEPL_HANDLER mission/devices/RwHandler.h mission/devices/SolarArrayDeploymentHandler.h
468 0x5da3 0x66a1 GOMS_ExecutionFailed SADPL_DeploymentAlreadyExecuting Command execution failed No description 163 161 GOM_SPACE_HANDLER SA_DEPL_HANDLER mission/devices/RwHandler.h mission/devices/SolarArrayDeploymentHandler.h
469 0x5da4 0x66a2 GOMS_CrcError SADPL_MainSwitchTimeoutFailure Reaction wheel reply has invalid crc No description 164 162 GOM_SPACE_HANDLER SA_DEPL_HANDLER mission/devices/RwHandler.h mission/devices/SolarArrayDeploymentHandler.h
470 0x5da5 0x66a3 GOMS_ValueNotRead SADPL_SwitchingDeplSa1Failed No description 165 163 GOM_SPACE_HANDLER SA_DEPL_HANDLER mission/devices/RwHandler.h mission/devices/SolarArrayDeploymentHandler.h
471 0x60a0 0x66a4 CCSDS_CommandNotImplemented SADPL_SwitchingDeplSa2Failed Received action message with unknown action id No description 160 164 CCSDS_HANDLER SA_DEPL_HANDLER mission/tmtc/CcsdsIpCoreHandler.h mission/devices/SolarArrayDeploymentHandler.h
0x63a0 NVMB_KeyNotExists Specified key does not exist in json file 160 NVM_PARAM_BASE mission/memory/NvmParameterBase.h
472 0x66a0 0x6900 SADPL_CommandNotSupported ACSCTRL_FileDeletionFailed No description 160 0 SA_DEPL_HANDLER ACS_CTRL mission/devices/SolarArrayDeploymentHandler.h mission/controller/AcsController.h
473 0x66a1 0x6a02 SADPL_DeploymentAlreadyExecuting ACSMEKF_MekfUninitialized No description 161 2 SA_DEPL_HANDLER ACS_MEKF mission/devices/SolarArrayDeploymentHandler.h mission/controller/acs/MultiplicativeKalmanFilter.h
474 0x66a2 0x6a03 SADPL_MainSwitchTimeoutFailure ACSMEKF_MekfNoGyrData No description 162 3 SA_DEPL_HANDLER ACS_MEKF mission/devices/SolarArrayDeploymentHandler.h mission/controller/acs/MultiplicativeKalmanFilter.h

View File

@ -259,6 +259,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
14006;0x36b6;CURRENT_IMAGE_INFO;INFO;P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;bsp_q7s/core/CoreController.h
14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;bsp_q7s/core/CoreController.h
14010;0x36ba;I2C_UNAVAILABLE_REBOOT;MEDIUM;No description;bsp_q7s/core/CoreController.h
14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/ThermalController.h
14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/ThermalController.h
14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h

1 Event ID (dec) Event ID (hex) Name Severity Description File Path
259 14006 0x36b6 CURRENT_IMAGE_INFO INFO P1: Current Chip, P2: Current Copy bsp_q7s/core/CoreController.h
260 14007 0x36b7 REBOOT_COUNTER INFO Total reboot counter, which is the sum of the boot count of all individual images. bsp_q7s/core/CoreController.h
261 14008 0x36b8 INDIVIDUAL_BOOT_COUNTS INFO Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1. bsp_q7s/core/CoreController.h
262 14010 0x36ba I2C_UNAVAILABLE_REBOOT MEDIUM No description bsp_q7s/core/CoreController.h
263 14010 14100 0x36ba 0x3714 I2C_UNAVAILABLE_REBOOT NO_VALID_SENSOR_TEMPERATURE MEDIUM No description bsp_q7s/core/CoreController.h mission/controller/ThermalController.h
264 14100 14101 0x3714 0x3715 NO_VALID_SENSOR_TEMPERATURE NO_HEALTHY_HEATER_AVAILABLE MEDIUM No description mission/controller/ThermalController.h
265 14101 14102 0x3715 0x3716 NO_HEALTHY_HEATER_AVAILABLE SYRLINKS_OVERHEATING MEDIUM HIGH No description mission/controller/ThermalController.h

View File

@ -190,8 +190,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x2207;TMF_AllDeleted;No description;7;TM_STORE_FRONTEND_IF;fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
0x2208;TMF_InvalidData;No description;8;TM_STORE_FRONTEND_IF;fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
0x2209;TMF_NotReady;No description;9;TM_STORE_FRONTEND_IF;fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
0x2401;MT_TooDetailedRequest;No description;1;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2402;MT_TooGeneralRequest;No description;2;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2401;MT_NoPacketFound;No description;1;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/DleParser.h
0x2402;MT_PossiblePacketLoss;No description;2;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/DleParser.h
0x2403;MT_NoMatch;No description;3;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2404;MT_Full;No description;4;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
0x2405;MT_NewNodeCreated;No description;5;MATCH_TREE_CLASS;fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
@ -370,8 +370,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x3e03;HKM_PeriodicHelperInvalid;No description;3;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
0x3e04;HKM_PoolobjectNotFound;No description;4;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
0x3e05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
0x3f01;DLEE_NoPacketFound;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
0x3f02;DLEE_PossiblePacketLoss;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
0x3f01;DLEE_StreamTooShort;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
0x3f02;DLEE_DecodingError;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
0x4201;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
0x4202;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
0x4203;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
@ -401,9 +401,9 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x4403;UXOS_CommandError;Command execution failed;3;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
0x4404;UXOS_NoCommandLoadedOrPending;;4;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
0x4406;UXOS_PcloseCallError;No description;6;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
0x4500;HSPI_OpeningFileFailed;No description;0;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
0x4501;HSPI_FullDuplexTransferFailed;No description;1;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
0x4502;HSPI_HalfDuplexTransferFailed;No description;2;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
0x4500;HSPI_HalTimeoutRetval;No description;0;HAL_SPI;fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
0x4501;HSPI_HalBusyRetval;No description;1;HAL_SPI;fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
0x4502;HSPI_HalErrorRetval;No description;2;HAL_SPI;fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
0x4601;HURT_UartReadFailure;No description;1;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
0x4602;HURT_UartReadSizeMissmatch;No description;2;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
0x4603;HURT_UartRxBufferTooSmall;No description;3;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
@ -448,8 +448,6 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x52b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
0x52b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
0x52b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/devices/devicedefinitions/rwHelpers.h
0x5300;STRH_NoReplyAvailable;No description;0;STR_HANDLER;linux/devices/ImtqPollingTask.h
0x5302;STRH_InvalidCrc;No description;2;STR_HANDLER;linux/devices/ScexHelper.h
0x53a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;160;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53a1;STRH_PingFailed;Ping command failed;161;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53a2;STRH_VersionReqFailed;Status in version reply signals error;162;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
@ -473,8 +471,10 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x53b4;STRH_CrcFailure;Received reply with invalid CRC;180;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53b5;STRH_StrHelperExecuting;Star tracker handler currently executing a command and using the communication interface;181;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53b7;STRH_StartrackerRunningFirmware;Star tracker is in firmware mode but must be in bootloader mode to execute this command;183;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53b8;STRH_StartrackerRunningBootloader;Star tracker is in bootloader mode but must be in firmware mode to execute this command;184;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x53b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;linux/devices/startracker/StarTrackerHandler.h
0x5400;DWLPWRON_NoReplyAvailable;No description;0;DWLPWRON_CMD;linux/devices/ImtqPollingTask.h
0x5402;DWLPWRON_InvalidCrc;No description;2;DWLPWRON_CMD;linux/devices/ScexHelper.h
0x54e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/devices/devicedefinitions/PlocMPSoCDefinitions.h
0x54e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/devices/devicedefinitions/PlocMPSoCDefinitions.h
0x5700;PLSPVhLP_RequestDone;No description;0;PLOC_SUPV_HELPER;linux/devices/ploc/PlocSupvUartMan.h
@ -506,6 +506,12 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/devices/GomspaceDeviceHandler.h
0x5da0;GOMS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da1;GOMS_InvalidRampTime;Action Message with invalid ramp time was received.;161;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da2;GOMS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da3;GOMS_ExecutionFailed;Command execution failed;163;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da4;GOMS_CrcError;Reaction wheel reply has invalid crc;164;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5da5;GOMS_ValueNotRead;No description;165;GOM_SPACE_HANDLER;mission/devices/RwHandler.h
0x5ea0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;160;PLOC_MEMORY_DUMPER;linux/devices/ploc/PlocMemoryDumper.h
0x5ea1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;161;PLOC_MEMORY_DUMPER;linux/devices/ploc/PlocMemoryDumper.h
0x5fa0;PDEC_AbandonedCltuRetval;No description;160;PDEC_HANDLER;linux/ipcore/PdecHandler.h
@ -535,12 +541,11 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
0x64a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;160;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
0x64a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;161;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
0x65a0;PLMPHLP_FileClosedAccidentally;File accidentally close;160;PLOC_MPSOC_HELPER;linux/devices/ploc/PlocMPSoCHelper.h
0x66a0;SADPL_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a1;SADPL_InvalidRampTime;Action Message with invalid ramp time was received.;161;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a2;SADPL_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a3;SADPL_ExecutionFailed;Command execution failed;163;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a4;SADPL_CrcError;Reaction wheel reply has invalid crc;164;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a5;SADPL_ValueNotRead;No description;165;SA_DEPL_HANDLER;mission/devices/RwHandler.h
0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/devices/SolarArrayDeploymentHandler.h
0x67a0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;160;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
0x67a1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;161;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
0x67a2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;162;MPSOC_RETURN_VALUES_IF;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h

1 Full ID (hex) Name Description Unique ID Subsytem Name File Path
190 0x2207 TMF_AllDeleted No description 7 TM_STORE_FRONTEND_IF fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
191 0x2208 TMF_InvalidData No description 8 TM_STORE_FRONTEND_IF fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
192 0x2209 TMF_NotReady No description 9 TM_STORE_FRONTEND_IF fsfw/src/fsfw/tmstorage/TmStoreFrontendIF.h
193 0x2401 MT_NoPacketFound No description 1 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/DleParser.h
194 0x2402 MT_PossiblePacketLoss No description 2 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/DleParser.h
195 0x2403 MT_NoMatch No description 3 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
196 0x2404 MT_Full No description 4 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
197 0x2405 MT_NewNodeCreated No description 5 MATCH_TREE_CLASS fsfw/src/fsfw/globalfunctions/matching/MatchTree.h
370 0x3e03 HKM_PeriodicHelperInvalid No description 3 HOUSEKEEPING_MANAGER fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
371 0x3e04 HKM_PoolobjectNotFound No description 4 HOUSEKEEPING_MANAGER fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
372 0x3e05 HKM_DatasetNotFound No description 5 HOUSEKEEPING_MANAGER fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
373 0x3f01 DLEE_StreamTooShort No description 1 DLE_ENCODER fsfw/src/fsfw/globalfunctions/DleEncoder.h
374 0x3f02 DLEE_DecodingError No description 2 DLE_ENCODER fsfw/src/fsfw/globalfunctions/DleEncoder.h
375 0x4201 PUS11_InvalidTypeTimeWindow No description 1 PUS_SERVICE_11 fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
376 0x4202 PUS11_InvalidTimeWindow No description 2 PUS_SERVICE_11 fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
377 0x4203 PUS11_TimeshiftingNotPossible No description 3 PUS_SERVICE_11 fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
401 0x4403 UXOS_CommandError Command execution failed 3 LINUX_OSAL fsfw/src/fsfw_hal/linux/CommandExecutor.h
402 0x4404 UXOS_NoCommandLoadedOrPending 4 LINUX_OSAL fsfw/src/fsfw_hal/linux/CommandExecutor.h
403 0x4406 UXOS_PcloseCallError No description 6 LINUX_OSAL fsfw/src/fsfw_hal/linux/CommandExecutor.h
404 0x4500 HSPI_HalTimeoutRetval No description 0 HAL_SPI fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
405 0x4501 HSPI_HalBusyRetval No description 1 HAL_SPI fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
406 0x4502 HSPI_HalErrorRetval No description 2 HAL_SPI fsfw/src/fsfw_hal/stm32h7/spi/spiDefinitions.h
407 0x4601 HURT_UartReadFailure No description 1 HAL_UART fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
408 0x4602 HURT_UartReadSizeMissmatch No description 2 HAL_UART fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
409 0x4603 HURT_UartRxBufferTooSmall No description 3 HAL_UART fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
448 0x52b5 RWHA_NoReply Reaction wheel only responds with empty frames. 181 RW_HANDLER mission/devices/devicedefinitions/rwHelpers.h
449 0x52b6 RWHA_NoStartMarker Expected a start marker as first byte 182 RW_HANDLER mission/devices/devicedefinitions/rwHelpers.h
450 0x52b7 RWHA_SpiReadTimeout Timeout when reading reply 183 RW_HANDLER mission/devices/devicedefinitions/rwHelpers.h
0x53a0 STRH_TemperatureReqFailed Status in temperature reply signals error 160 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
0x53a1 STRH_PingFailed Ping command failed 161 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
451 0x53a2 0x53a0 STRH_VersionReqFailed STRH_TemperatureReqFailed Status in version reply signals error Status in temperature reply signals error 162 160 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
452 0x53a3 0x53a1 STRH_InterfaceReqFailed STRH_PingFailed Status in interface reply signals error Ping command failed 163 161 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
453 0x53a4 0x53a2 STRH_PowerReqFailed STRH_VersionReqFailed Status in power reply signals error Status in version reply signals error 164 162 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
471 0x53b6 0x53b4 STRH_StartrackerAlreadyBooted STRH_CrcFailure Star tracker is already in firmware mode Received reply with invalid CRC 182 180 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
472 0x53b7 0x53b5 STRH_StartrackerNotRunningFirmware STRH_StrHelperExecuting Star tracker must be in firmware mode to run this command Star tracker handler currently executing a command and using the communication interface 183 181 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
473 0x53b8 0x53b6 STRH_StartrackerNotRunningBootloader STRH_StartrackerAlreadyBooted Star tracker must be in bootloader mode to run this command Star tracker is already in firmware mode 184 182 STR_HANDLER linux/devices/startracker/StarTrackerHandler.h
474 0x5400 0x53b7 DWLPWRON_NoReplyAvailable STRH_StartrackerNotRunningFirmware No description Star tracker must be in firmware mode to run this command 0 183 DWLPWRON_CMD STR_HANDLER linux/devices/ImtqPollingTask.h linux/devices/startracker/StarTrackerHandler.h
475 0x5402 0x53b8 DWLPWRON_InvalidCrc STRH_StartrackerNotRunningBootloader No description Star tracker must be in bootloader mode to run this command 2 184 DWLPWRON_CMD STR_HANDLER linux/devices/ScexHelper.h linux/devices/startracker/StarTrackerHandler.h
476 0x5400 DWLPWRON_NoReplyAvailable No description 0 DWLPWRON_CMD linux/devices/ImtqPollingTask.h
477 0x5402 DWLPWRON_InvalidCrc No description 2 DWLPWRON_CMD linux/devices/ScexHelper.h
478 0x54e0 DWLPWRON_InvalidMode Received command has invalid JESD mode (valid modes are 0 - 5) 224 DWLPWRON_CMD linux/devices/devicedefinitions/PlocMPSoCDefinitions.h
479 0x54e1 DWLPWRON_InvalidLaneRate Received command has invalid lane rate (valid lane rate are 0 - 9) 225 DWLPWRON_CMD linux/devices/devicedefinitions/PlocMPSoCDefinitions.h
480 0x5700 PLSPVhLP_RequestDone No description 0 PLOC_SUPV_HELPER linux/devices/ploc/PlocSupvUartMan.h
506 0x5d00 0x5d03 GOMS_PacketTooLong GOMS_InvalidParamSize No description 0 3 GOM_SPACE_HANDLER mission/devices/GomspaceDeviceHandler.h
507 0x5d01 0x5d04 GOMS_InvalidTableId GOMS_InvalidPayloadSize No description 1 4 GOM_SPACE_HANDLER mission/devices/GomspaceDeviceHandler.h
508 0x5d02 0x5d05 GOMS_InvalidAddress GOMS_UnknownReplyId No description 2 5 GOM_SPACE_HANDLER mission/devices/GomspaceDeviceHandler.h
509 0x5da0 GOMS_InvalidSpeed Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000] 160 GOM_SPACE_HANDLER mission/devices/RwHandler.h
510 0x5da1 GOMS_InvalidRampTime Action Message with invalid ramp time was received. 161 GOM_SPACE_HANDLER mission/devices/RwHandler.h
511 0x5da2 GOMS_SetSpeedCommandInvalidLength Received set speed command has invalid length. Should be 6. 162 GOM_SPACE_HANDLER mission/devices/RwHandler.h
512 0x5da3 GOMS_ExecutionFailed Command execution failed 163 GOM_SPACE_HANDLER mission/devices/RwHandler.h
513 0x5da4 GOMS_CrcError Reaction wheel reply has invalid crc 164 GOM_SPACE_HANDLER mission/devices/RwHandler.h
514 0x5da5 GOMS_ValueNotRead No description 165 GOM_SPACE_HANDLER mission/devices/RwHandler.h
515 0x5d03 0x5ea0 GOMS_InvalidParamSize PLMEMDUMP_MramAddressTooHigh No description The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000. 3 160 GOM_SPACE_HANDLER PLOC_MEMORY_DUMPER mission/devices/GomspaceDeviceHandler.h linux/devices/ploc/PlocMemoryDumper.h
516 0x5d04 0x5ea1 GOMS_InvalidPayloadSize PLMEMDUMP_MramInvalidAddressCombination No description The specified end address is lower than the start address 4 161 GOM_SPACE_HANDLER PLOC_MEMORY_DUMPER mission/devices/GomspaceDeviceHandler.h linux/devices/ploc/PlocMemoryDumper.h
517 0x5d05 0x5fa0 GOMS_UnknownReplyId PDEC_AbandonedCltuRetval No description 5 160 GOM_SPACE_HANDLER PDEC_HANDLER mission/devices/GomspaceDeviceHandler.h linux/ipcore/PdecHandler.h
541 0x60a0 0x64a0 CCSDS_CommandNotImplemented FSHLP_SdNotMounted Received action message with unknown action id SD card specified with path string not mounted 160 CCSDS_HANDLER FILE_SYSTEM_HELPER mission/tmtc/CcsdsIpCoreHandler.h bsp_q7s/fs/FilesystemHelper.h
542 0x61a0 0x64a1 RS_RateNotSupported FSHLP_FileNotExists The commanded rate is not supported by the current FPGA design Specified file does not exist on filesystem 160 161 RATE_SETTER FILE_SYSTEM_HELPER linux/ipcore/PtmeConfig.h bsp_q7s/fs/FilesystemHelper.h
543 0x61a1 0x65a0 RS_BadBitRate PLMPHLP_FileClosedAccidentally Bad bitrate has been commanded (e.g. 0) File accidentally close 161 160 RATE_SETTER PLOC_MPSOC_HELPER linux/ipcore/PtmeConfig.h linux/devices/ploc/PlocMPSoCHelper.h
544 0x61a2 0x66a0 RS_ClkInversionFailed SADPL_CommandNotSupported Failed to invert clock and thus change the time the data is updated with respect to the tx clock No description 162 160 RATE_SETTER SA_DEPL_HANDLER linux/ipcore/PtmeConfig.h mission/devices/SolarArrayDeploymentHandler.h
545 0x61a3 0x66a1 RS_TxManipulatorConfigFailed SADPL_DeploymentAlreadyExecuting Failed to change configuration bit of tx clock manipulator No description 163 161 RATE_SETTER SA_DEPL_HANDLER linux/ipcore/PtmeConfig.h mission/devices/SolarArrayDeploymentHandler.h
546 0x6201 0x66a2 JSONBASE_JsonFileNotExists SADPL_MainSwitchTimeoutFailure Specified json file does not exist No description 1 162 ARCSEC_JSON_BASE SA_DEPL_HANDLER linux/devices/startracker/ArcsecJsonParamBase.h mission/devices/SolarArrayDeploymentHandler.h
547 0x6202 0x66a3 JSONBASE_SetNotExists SADPL_SwitchingDeplSa1Failed Requested set does not exist in json file No description 2 163 ARCSEC_JSON_BASE SA_DEPL_HANDLER linux/devices/startracker/ArcsecJsonParamBase.h mission/devices/SolarArrayDeploymentHandler.h
548 0x6203 0x66a4 JSONBASE_ParamNotExists SADPL_SwitchingDeplSa2Failed Requested parameter does not exist in json file No description 3 164 ARCSEC_JSON_BASE SA_DEPL_HANDLER linux/devices/startracker/ArcsecJsonParamBase.h mission/devices/SolarArrayDeploymentHandler.h
0x63a0 NVMB_KeyNotExists Specified key does not exist in json file 160 NVM_PARAM_BASE mission/memory/NvmParameterBase.h
549 0x64a0 0x67a0 FSHLP_SdNotMounted MPSOCRTVIF_CrcFailure SD card specified with path string not mounted Space Packet received from PLOC has invalid CRC 160 FILE_SYSTEM_HELPER MPSOC_RETURN_VALUES_IF bsp_q7s/fs/FilesystemHelper.h linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
550 0x64a1 0x67a1 FSHLP_FileNotExists MPSOCRTVIF_ReceivedAckFailure Specified file does not exist on filesystem Received ACK failure reply from PLOC 161 FILE_SYSTEM_HELPER MPSOC_RETURN_VALUES_IF bsp_q7s/fs/FilesystemHelper.h linux/devices/devicedefinitions/MPSoCReturnValuesIF.h
551 0x65a0 0x67a2 PLMPHLP_FileClosedAccidentally MPSOCRTVIF_ReceivedExeFailure File accidentally close Received execution failure reply from PLOC 160 162 PLOC_MPSOC_HELPER MPSOC_RETURN_VALUES_IF linux/devices/ploc/PlocMPSoCHelper.h linux/devices/devicedefinitions/MPSoCReturnValuesIF.h

View File

@ -1,7 +1,7 @@
/**
* @brief Auto-generated event translation file. Contains 278 translations.
* @brief Auto-generated event translation file. Contains 279 translations.
* @details
* Generated on: 2023-03-21 12:45:57
* Generated on: 2023-03-21 23:59:36
*/
#include "translateEvents.h"
@ -260,6 +260,7 @@ const char *VERSION_INFO_STRING = "VERSION_INFO";
const char *CURRENT_IMAGE_INFO_STRING = "CURRENT_IMAGE_INFO";
const char *REBOOT_COUNTER_STRING = "REBOOT_COUNTER";
const char *INDIVIDUAL_BOOT_COUNTS_STRING = "INDIVIDUAL_BOOT_COUNTS";
const char *I2C_UNAVAILABLE_REBOOT_STRING = "I2C_UNAVAILABLE_REBOOT";
const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
@ -791,6 +792,8 @@ const char *translateEvents(Event event) {
return REBOOT_COUNTER_STRING;
case (14008):
return INDIVIDUAL_BOOT_COUNTS_STRING;
case (14010):
return I2C_UNAVAILABLE_REBOOT_STRING;
case (14100):
return NO_VALID_SENSOR_TEMPERATURE_STRING;
case (14101):

View File

@ -2,7 +2,7 @@
* @brief Auto-generated object translation file.
* @details
* Contains 173 translations.
* Generated on: 2023-03-21 12:45:57
* Generated on: 2023-03-21 23:59:36
*/
#include "translateObjects.h"

View File

@ -303,7 +303,7 @@ ReturnValue_t GpsHyperionLinuxController::handleGpsReadData() {
bool timeValid = false;
if (TIME_SET == (TIME_SET & gps.set)) {
// To prevent totally incorrect times from being declared valid.
if(gpsSet.satInView.isValid() and gpsSet.satInView.value >= 1) {
if (gpsSet.satInView.isValid() and gpsSet.satInView.value >= 1) {
timeValid = true;
}
timeval time = {};

View File

@ -10,9 +10,8 @@
#include "fsfw/FSFW.h"
ImtqPollingTask::ImtqPollingTask(object_id_t imtqPollingTask,
std::atomic_uint16_t& i2cFatalErrors): SystemObject(imtqPollingTask),
i2cFatalErrors(i2cFatalErrors) {
ImtqPollingTask::ImtqPollingTask(object_id_t imtqPollingTask, std::atomic_uint16_t& i2cFatalErrors)
: SystemObject(imtqPollingTask), i2cFatalErrors(i2cFatalErrors) {
semaphore = SemaphoreFactory::instance()->createBinarySemaphore();
semaphore->acquire();
ipcLock = MutexFactory::instance()->createMutex();
@ -429,7 +428,7 @@ ReturnValue_t ImtqPollingTask::performI2cFullRequest(uint8_t* reply, size_t repl
if (ioctl(fd, I2C_SLAVE, i2cAddr) < 0) {
sif::warning << "Opening IMTQ slave device failed with code " << errno << ": "
<< strerror(errno) << std::endl;
if(errno == EBUSY) {
if (errno == EBUSY) {
i2cFatalErrors++;
}
}
@ -440,7 +439,7 @@ ReturnValue_t ImtqPollingTask::performI2cFullRequest(uint8_t* reply, size_t repl
<< ". Error description: " << strerror(errno) << std::endl;
// This is a weird issue which sometimes occurs on debug builds. All I2C buses are busy
// for all writes,
if(errno == EBUSY) {
if (errno == EBUSY) {
i2cFatalErrors++;
}
return returnvalue::FAILED;

View File

@ -4,11 +4,12 @@
#include <fsfw/tasks/SemaphoreIF.h>
#include <fsfw_hal/linux/i2c/I2cCookie.h>
#include <atomic>
#include "fsfw/devicehandlers/DeviceCommunicationIF.h"
#include "fsfw/objectmanager/SystemObject.h"
#include "fsfw/tasks/ExecutableObjectIF.h"
#include "mission/devices/devicedefinitions/imtqHelpers.h"
#include <atomic>
class ImtqPollingTask : public SystemObject,
public ExecutableObjectIF,

View File

@ -129,7 +129,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
break;
}
if (strHelperExecuting == true) {
if (strHelperHandlingSpecialRequest == true) {
return STR_HELPER_EXECUTING;
}
@ -157,7 +157,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
if (result != returnvalue::OK) {
return result;
}
strHelperExecuting = true;
strHelperHandlingSpecialRequest = true;
return EXECUTION_FINISHED;
}
case (startracker::DOWNLOAD_IMAGE): {
@ -173,7 +173,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
if (result != returnvalue::OK) {
return result;
}
strHelperExecuting = true;
strHelperHandlingSpecialRequest = true;
return EXECUTION_FINISHED;
}
case (startracker::FLASH_READ): {
@ -185,7 +185,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
if (result != returnvalue::OK) {
return result;
}
strHelperExecuting = true;
strHelperHandlingSpecialRequest = true;
return EXECUTION_FINISHED;
}
case (startracker::CHANGE_IMAGE_DOWNLOAD_FILE): {
@ -215,7 +215,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
if (result != returnvalue::OK) {
return result;
}
strHelperExecuting = true;
strHelperHandlingSpecialRequest = true;
return EXECUTION_FINISHED;
}
default:
@ -283,6 +283,9 @@ void StarTrackerHandler::doShutDown() {
}
ReturnValue_t StarTrackerHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
if (strHelperHandlingSpecialRequest) {
return NOTHING_TO_SEND;
}
switch (normalState) {
case NormalState::TEMPERATURE_REQUEST:
*id = startracker::REQ_TEMPERATURE;
@ -1296,7 +1299,7 @@ size_t StarTrackerHandler::getNextReplyLength(DeviceCommandId_t commandId) {
ReturnValue_t StarTrackerHandler::doSendReadHook() {
// Prevent DHB from polling UART during commands executed by the image loader task
if (strHelperExecuting) {
if (strHelperHandlingSpecialRequest) {
return returnvalue::FAILED;
}
return returnvalue::OK;
@ -1538,7 +1541,7 @@ void StarTrackerHandler::handleEvent(EventMessage* eventMessage) {
case objects::STR_HELPER: {
// All events from image loader signal either that the operation was successful or that it
// failed
strHelperExecuting = false;
strHelperHandlingSpecialRequest = false;
break;
}
default:
@ -2147,14 +2150,14 @@ ReturnValue_t StarTrackerHandler::checkCommand(ActionId_t actionId) {
case startracker::REQ_SUBSCRIPTION:
case startracker::REQ_LOG_SUBSCRIPTION:
case startracker::REQ_DEBUG_CAMERA:
if (not(getMode() == MODE_ON && getSubmode() == startracker::Program::FIRMWARE)) {
return STARTRACKER_RUNNING_BOOTLOADER;
if (getMode() == MODE_ON and getSubmode() != startracker::Program::FIRMWARE) {
return STARTRACKER_NOT_RUNNING_FIRMWARE;
}
break;
case startracker::FIRMWARE_UPDATE:
case startracker::FLASH_READ:
if (not(getMode() == MODE_ON && getSubmode() == startracker::Program::BOOTLOADER)) {
return STARTRACKER_RUNNING_FIRMWARE;
if (getMode() != MODE_ON or getSubmode() != startracker::Program::BOOTLOADER) {
return STARTRACKER_NOT_RUNNING_BOOTLOADER;
}
break;
default:

View File

@ -132,12 +132,10 @@ class StarTrackerHandler : public DeviceHandlerBase {
static const ReturnValue_t STR_HELPER_EXECUTING = MAKE_RETURN_CODE(0xB5);
//! [EXPORT] : [COMMENT] Star tracker is already in firmware mode
static const ReturnValue_t STARTRACKER_ALREADY_BOOTED = MAKE_RETURN_CODE(0xB6);
//! [EXPORT] : [COMMENT] Star tracker is in firmware mode but must be in bootloader mode to
//! execute this command
static const ReturnValue_t STARTRACKER_RUNNING_FIRMWARE = MAKE_RETURN_CODE(0xB7);
//! [EXPORT] : [COMMENT] Star tracker is in bootloader mode but must be in firmware mode to
//! execute this command
static const ReturnValue_t STARTRACKER_RUNNING_BOOTLOADER = MAKE_RETURN_CODE(0xB8);
//! [EXPORT] : [COMMENT] Star tracker must be in firmware mode to run this command
static const ReturnValue_t STARTRACKER_NOT_RUNNING_FIRMWARE = MAKE_RETURN_CODE(0xB7);
//! [EXPORT] : [COMMENT] Star tracker must be in bootloader mode to run this command
static const ReturnValue_t STARTRACKER_NOT_RUNNING_BOOTLOADER = MAKE_RETURN_CODE(0xB8);
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::STR_HANDLER;
@ -291,7 +289,7 @@ class StarTrackerHandler : public DeviceHandlerBase {
InternalState internalState = InternalState::IDLE;
bool strHelperExecuting = false;
bool strHelperHandlingSpecialRequest = false;
const power::Switch_t powerSwitch = power::NO_SWITCH;

View File

@ -263,6 +263,10 @@ ReturnValue_t StrHelper::performImageUpload() {
return returnvalue::FAILED;
}
std::ifstream file(uploadImage.uploadFile, std::ifstream::binary);
if (file.bad()) {
return HasFileSystemIF::GENERIC_FILE_ERROR;
}
// Set position of next character to end of file input stream
file.seekg(0, file.end);
// tellg returns position of character in input stream

View File

@ -1,7 +1,7 @@
/**
* @brief Auto-generated event translation file. Contains 278 translations.
* @brief Auto-generated event translation file. Contains 279 translations.
* @details
* Generated on: 2023-03-21 12:45:57
* Generated on: 2023-03-21 23:59:36
*/
#include "translateEvents.h"
@ -260,6 +260,7 @@ const char *VERSION_INFO_STRING = "VERSION_INFO";
const char *CURRENT_IMAGE_INFO_STRING = "CURRENT_IMAGE_INFO";
const char *REBOOT_COUNTER_STRING = "REBOOT_COUNTER";
const char *INDIVIDUAL_BOOT_COUNTS_STRING = "INDIVIDUAL_BOOT_COUNTS";
const char *I2C_UNAVAILABLE_REBOOT_STRING = "I2C_UNAVAILABLE_REBOOT";
const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
@ -791,6 +792,8 @@ const char *translateEvents(Event event) {
return REBOOT_COUNTER_STRING;
case (14008):
return INDIVIDUAL_BOOT_COUNTS_STRING;
case (14010):
return I2C_UNAVAILABLE_REBOOT_STRING;
case (14100):
return NO_VALID_SENSOR_TEMPERATURE_STRING;
case (14101):

View File

@ -2,7 +2,7 @@
* @brief Auto-generated object translation file.
* @details
* Contains 173 translations.
* Generated on: 2023-03-21 12:45:57
* Generated on: 2023-03-21 23:59:36
*/
#include "translateObjects.h"

View File

@ -71,6 +71,22 @@ ReturnValue_t AxiPtmeConfig::disableTxclockInversion() {
return returnvalue::OK;
}
ReturnValue_t AxiPtmeConfig::enableBatPriorityBit() {
ReturnValue_t result = writeBit(COMMON_CONFIG_REG, true, BitPos::EN_BAT_PRIORITY);
if (result != returnvalue::OK) {
return result;
}
return returnvalue::OK;
}
ReturnValue_t AxiPtmeConfig::disableBatPriorityBit() {
ReturnValue_t result = writeBit(COMMON_CONFIG_REG, false, BitPos::EN_BAT_PRIORITY);
if (result != returnvalue::OK) {
return result;
}
return returnvalue::OK;
}
ReturnValue_t AxiPtmeConfig::writeReg(uint32_t regOffset, uint32_t writeVal) {
ReturnValue_t result = returnvalue::OK;
result = mutex->lockMutex(timeoutType, mutexTimeout);

View File

@ -54,6 +54,9 @@ class AxiPtmeConfig : public SystemObject {
ReturnValue_t enableTxclockInversion();
ReturnValue_t disableTxclockInversion();
ReturnValue_t enableBatPriorityBit();
ReturnValue_t disableBatPriorityBit();
private:
// Address of register storing the bitrate configuration parameter
static const uint32_t CADU_BITRATE_REG = 0x0;
@ -61,7 +64,7 @@ class AxiPtmeConfig : public SystemObject {
static const uint32_t COMMON_CONFIG_REG = 0x4;
static const uint32_t ADRESS_DIVIDER = 4;
enum class BitPos : uint32_t { EN_TX_CLK_MANIPULATOR, INVERT_CLOCK };
enum class BitPos : uint32_t { EN_TX_CLK_MANIPULATOR = 0, INVERT_CLOCK = 1, EN_BAT_PRIORITY = 2 };
std::string axiUio;
std::string uioMap;

View File

@ -48,3 +48,11 @@ ReturnValue_t PtmeConfig::configTxManipulator(bool enable) {
}
return result;
}
ReturnValue_t PtmeConfig::enableBatPriorityBit(bool enable) {
if (enable) {
return axiPtmeConfig->enableBatPriorityBit();
} else {
return axiPtmeConfig->disableBatPriorityBit();
}
}

View File

@ -1,6 +1,8 @@
#ifndef LINUX_OBC_PTMECONFIG_H_
#define LINUX_OBC_PTMECONFIG_H_
#include <fsfw_hal/common/gpio/gpioDefinitions.h>
#include "AxiPtmeConfig.h"
#include "fsfw/objectmanager/SystemObject.h"
#include "fsfw/returnvalues/returnvalue.h"
@ -53,6 +55,15 @@ class PtmeConfig : public SystemObject {
*/
ReturnValue_t configTxManipulator(bool enable);
/**
* Enable the bat priority bit in the PTME wrapper component.
* Please note that a reset of the PTME is still required as specified in the documentation.
* This is done by a higher level component.
* @param enable
* @return
*/
ReturnValue_t enableBatPriorityBit(bool enable);
private:
static const uint8_t INTERFACE_ID = CLASS_ID::RATE_SETTER;

View File

@ -3,6 +3,7 @@
#include <fsfw/subsystem/helper.h>
#include <linux/ipcore/PtmeConfig.h>
#include <mission/config/comCfg.h>
#include <unistd.h>
#include "eive/definitions.h"
#include "fsfw/ipc/QueueFactory.h"
@ -14,7 +15,7 @@
CcsdsIpCoreHandler::CcsdsIpCoreHandler(object_id_t objectId, object_id_t tcDestination,
PtmeConfig& ptmeConfig, std::atomic_bool& linkState,
GpioIF* gpioIF, gpioId_t enTxClock, gpioId_t enTxData)
GpioIF* gpioIF, PtmeGpios gpioIds)
: SystemObject(objectId),
linkState(linkState),
tcDestination(tcDestination),
@ -22,9 +23,8 @@ CcsdsIpCoreHandler::CcsdsIpCoreHandler(object_id_t objectId, object_id_t tcDesti
actionHelper(this, nullptr),
modeHelper(this),
ptmeConfig(ptmeConfig),
gpioIF(gpioIF),
enTxClock(enTxClock),
enTxData(enTxData) {
ptmeGpios(gpioIds),
gpioIF(gpioIF) {
commandQueue = QueueFactory::instance()->createMessageQueue(QUEUE_SIZE);
auto mqArgs = MqArgs(objectId, static_cast<void*>(this));
eventQueue =
@ -39,7 +39,7 @@ ReturnValue_t CcsdsIpCoreHandler::performOperation(uint8_t operationCode) {
}
ReturnValue_t CcsdsIpCoreHandler::initialize() {
ReturnValue_t result = returnvalue::OK;
AcceptsTelecommandsIF* tcDistributor =
ObjectManager::instance()->get<AcceptsTelecommandsIF>(tcDestination);
if (tcDistributor == nullptr) {
@ -51,7 +51,7 @@ ReturnValue_t CcsdsIpCoreHandler::initialize() {
tcDistributorQueueId = tcDistributor->getRequestQueue();
result = parameterHelper.initialize();
ReturnValue_t result = parameterHelper.initialize();
if (result != returnvalue::OK) {
return result;
}
@ -71,6 +71,13 @@ ReturnValue_t CcsdsIpCoreHandler::initialize() {
return ObjectManagerIF::CHILD_INIT_FAILED;
}
// This also pulls the PTME out of reset state.
if (batPriorityParam == 0) {
disablePrioritySelectMode();
} else {
enablePrioritySelectMode();
}
#if OBSW_SYRLINKS_SIMULATED == 1
// Update data on rising edge
ptmeConfig.invertTxClock(false);
@ -111,7 +118,24 @@ ReturnValue_t CcsdsIpCoreHandler::getParameter(uint8_t domainId, uint8_t uniqueI
ParameterWrapper* parameterWrapper,
const ParameterWrapper* newValues,
uint16_t startAtIndex) {
return returnvalue::OK;
if ((domainId == 0) and (uniqueIdentifier == ParamId::BAT_PRIORITY)) {
uint8_t newVal = 0;
ReturnValue_t result = newValues->getElement(&newVal);
if (result != returnvalue::OK) {
return result;
}
if (newVal > 1) {
return HasParametersIF::INVALID_VALUE;
}
parameterWrapper->set(batPriorityParam);
if (mode == MODE_ON) {
updateBatPriorityOnTxOff = true;
} else if (mode == MODE_OFF) {
updateBatPriorityFromParam();
}
return returnvalue::OK;
}
return HasParametersIF::INVALID_IDENTIFIER_ID;
}
uint32_t CcsdsIpCoreHandler::getIdentifier() const { return 0; }
@ -184,8 +208,8 @@ void CcsdsIpCoreHandler::updateLinkState() { linkState = LINK_UP; }
void CcsdsIpCoreHandler::enableTransmit() {
#ifndef TE0720_1CFA
gpioIF->pullHigh(enTxClock);
gpioIF->pullHigh(enTxData);
gpioIF->pullHigh(ptmeGpios.enableTxClock);
gpioIF->pullHigh(ptmeGpios.enableTxData);
#endif
linkState = LINK_UP;
}
@ -211,14 +235,8 @@ ReturnValue_t CcsdsIpCoreHandler::checkModeCommand(Mode_t mode, Submode_t submod
}
void CcsdsIpCoreHandler::startTransition(Mode_t mode, Submode_t submode) {
auto rateHigh = [&]() {
ReturnValue_t result = ptmeConfig.setRate(RATE_500KBPS);
if (result == returnvalue::OK) {
this->mode = HasModesIF::MODE_ON;
}
};
auto rateLow = [&]() {
ReturnValue_t result = ptmeConfig.setRate(RATE_100KBPS);
auto rateSet = [&](uint32_t rate) {
ReturnValue_t result = ptmeConfig.setRate(rate);
if (result == returnvalue::OK) {
this->mode = HasModesIF::MODE_ON;
}
@ -228,14 +246,14 @@ void CcsdsIpCoreHandler::startTransition(Mode_t mode, Submode_t submode) {
if (submode == static_cast<Submode_t>(com::CcsdsSubmode::DATARATE_DEFAULT)) {
com::Datarate currentDatarate = com::getCurrentDatarate();
if (currentDatarate == com::Datarate::LOW_RATE_MODULATION_BPSK) {
rateLow();
rateSet(RATE_100KBPS);
} else if (currentDatarate == com::Datarate::HIGH_RATE_MODULATION_0QPSK) {
rateHigh();
rateSet(RATE_500KBPS);
}
} else if (submode == static_cast<Submode_t>(com::CcsdsSubmode::DATARATE_HIGH)) {
rateHigh();
rateSet(RATE_500KBPS);
} else if (submode == static_cast<Submode_t>(com::CcsdsSubmode::DATARATE_LOW)) {
rateLow();
rateSet(RATE_100KBPS);
}
} else if (mode == HasModesIF::MODE_OFF) {
@ -251,10 +269,14 @@ void CcsdsIpCoreHandler::announceMode(bool recursive) { triggerEvent(MODE_INFO,
void CcsdsIpCoreHandler::disableTransmit() {
#ifndef TE0720_1CFA
gpioIF->pullLow(enTxClock);
gpioIF->pullLow(enTxData);
gpioIF->pullLow(ptmeGpios.enableTxClock);
gpioIF->pullLow(ptmeGpios.enableTxData);
#endif
linkState = LINK_DOWN;
if (updateBatPriorityOnTxOff) {
updateBatPriorityFromParam();
updateBatPriorityOnTxOff = false;
}
}
const char* CcsdsIpCoreHandler::getName() const { return "CCSDS Handler"; }
@ -270,3 +292,27 @@ ReturnValue_t CcsdsIpCoreHandler::connectModeTreeParent(HasModeTreeChildrenIF& p
ModeTreeChildIF& CcsdsIpCoreHandler::getModeTreeChildIF() { return *this; }
object_id_t CcsdsIpCoreHandler::getObjectId() const { return SystemObject::getObjectId(); }
void CcsdsIpCoreHandler::enablePrioritySelectMode() {
ptmeConfig.enableBatPriorityBit(true);
// Reset the PTME
gpioIF->pullLow(ptmeGpios.ptmeResetn);
usleep(10);
gpioIF->pullHigh(ptmeGpios.ptmeResetn);
}
void CcsdsIpCoreHandler::disablePrioritySelectMode() {
ptmeConfig.enableBatPriorityBit(false);
// Reset the PTME
gpioIF->pullLow(ptmeGpios.ptmeResetn);
usleep(10);
gpioIF->pullHigh(ptmeGpios.ptmeResetn);
}
void CcsdsIpCoreHandler::updateBatPriorityFromParam() {
if (batPriorityParam == 0) {
disablePrioritySelectMode();
} else {
enablePrioritySelectMode();
}
}

View File

@ -25,12 +25,25 @@
#include "linux/ipcore/PtmeConfig.h"
#include "mission/comDefs.h"
struct PtmeGpios {
gpioId_t enableTxClock = gpio::NO_GPIO;
gpioId_t enableTxData = gpio::NO_GPIO;
gpioId_t ptmeResetn = gpio::NO_GPIO;
};
/**
* @brief This class handles the data exchange with the CCSDS IP cores implemented in the
* programmable logic of the Q7S.
*
* @details After reboot default CADU bitrate is always set to 100 kbps (results in downlink rate
* of 200 kbps due to convolutional code added by syrlinks transceiver)
* @details
* After reboot default CADU bitrate is always set to 100 kbps (results in downlink rate
* of 200 kbps due to convolutional code added by syrlinks transceiver). The IP core handler exposes
* a parameter to enable the priority selection mode for the PTME core.
*
* If the transmitter is on, the selection mode will be enabled when the transmitter goes off.
* If the transmitter is off, the update of the PTME will be done immediately on a parameter update.
* This is done because changing this parameter requires a reset of the PTME core to avoid bugs
* while the transmitter is enabled.
*
* @author J. Meier
*/
@ -39,11 +52,12 @@ class CcsdsIpCoreHandler : public SystemObject,
public ModeTreeChildIF,
public ModeTreeConnectionIF,
public HasModesIF,
// public AcceptsTelemetryIF,
public AcceptsTelecommandsIF,
public ReceivesParameterMessagesIF,
public HasActionsIF {
public:
enum ParamId : uint8_t { BAT_PRIORITY = 0 };
static const bool LINK_UP = true;
static const bool LINK_DOWN = false;
using VcId_t = uint8_t;
@ -61,8 +75,7 @@ class CcsdsIpCoreHandler : public SystemObject,
* @param enTxData GPIO ID of RS485 tx data enable
*/
CcsdsIpCoreHandler(object_id_t objectId, object_id_t tcDestination, PtmeConfig& ptmeConfig,
std::atomic_bool& linkState, GpioIF* gpioIF, gpioId_t enTxClock,
gpioId_t enTxData);
std::atomic_bool& linkState, GpioIF* gpioIF, PtmeGpios gpioIds);
~CcsdsIpCoreHandler();
@ -138,15 +151,14 @@ class CcsdsIpCoreHandler : public SystemObject,
MessageQueueId_t tcDistributorQueueId = MessageQueueIF::NO_QUEUE;
PtmeConfig& ptmeConfig;
PtmeGpios ptmeGpios;
// BAT priority bit on by default to enable priority selection mode for the PTME.
uint8_t batPriorityParam = 1;
bool updateBatPriorityOnTxOff = false;
GpioIF* gpioIF = nullptr;
// GPIO to enable RS485 transceiver for TX clock
gpioId_t enTxClock = gpio::NO_GPIO;
// GPIO to enable RS485 transceiver for TX data signal
gpioId_t enTxData = gpio::NO_GPIO;
void readCommandQueue(void);
void handleTelemetry();
/**
* @brief Forward link state to virtual channels.
@ -163,6 +175,16 @@ class CcsdsIpCoreHandler : public SystemObject,
* RS485 transceiver chips to high.
*/
void disableTransmit();
/**
* The following set of functions configure the mode of the PTME bandwith allocation table (BAT)
* module. This consists of the following 2 steps:
* 1. Update the BAT priority bit in the PTME wrapper
* 2. Reset the PTME as specified in the datasheet.
*/
void enablePrioritySelectMode();
void disablePrioritySelectMode();
void updateBatPriorityFromParam();
};
#endif /* CCSDSHANDLER_H_ */

2
tmtc

@ -1 +1 @@
Subproject commit b32a9273ae4186a440685ffde7618f017cfdb268
Subproject commit c171654d2b18547249ee03ace3a4016e8837cf4a